1 # 2 # CDDL HEADER START 3 # 4 # The contents of this file are subject to the terms of the 5 # Common Development and Distribution License (the "License"). 6 # You may not use this file except in compliance with the License. 7 # 8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 # or http://www.opensolaris.org/os/licensing. 10 # See the License for the specific language governing permissions 11 # and limitations under the License. 12 # 13 # When distributing Covered Code, include this CDDL HEADER in each 14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 # If applicable, add the following below this CDDL HEADER, with the 16 # fields enclosed by brackets "[]" replaced with your own identifying 17 # information: Portions Copyright [yyyy] [name of copyright owner] 18 # 19 # CDDL HEADER END 20 # 21 22 # 23 # Copyright (c) 1989, 2010, Oracle and/or its affiliates. All rights reserved. 24 # Copyright 2018 Nexenta Systems, Inc. 25 # 26 27 include ../Makefile.master 28 29 # 30 # List of architectures to build as part of the standard build. 31 # 32 # Some of these architectures are built in parallel (see i386_PARALLEL and 33 # sparc_PARALLEL). This requires building some parts first before parallel build 34 # can start. Platform make files know what should be built as a prerequisite for 35 # the parallel build to work. The i386_PREREQ and sparc_PREREQ variables tell 36 # which platform directory to enter to start making prerequisite dependencies. 37 # 38 sparc_ARCHITECTURES = sun4v sun4u sparc 39 40 i386_ARCHITECTURES = i86pc i86xpv intel 41 42 # 43 # For i386 all architectures can be compiled in parallel. 44 # 45 # intel/Makefile knows how to build prerequisites needed for parallel build. 46 # 47 i386_PREREQ = intel 48 i386_PARALLEL = $(i386_ARCHITECTURES) 49 50 # 51 # For sparc all architectures can be compiled in parallel. 52 # 53 # sun4/Makefile knows how to build prerequisites needed for parallel build. 54 # can start. 55 # 56 sparc_PREREQ = sun4 57 sparc_PARALLEL = $(sparc_ARCHITECTURES) 58 59 # 60 # Platforms defined in $(MACH)_PARALLEL are built in parallel. DUMMY is placed 61 # at the end in case $(MACH)_PARALLEL is empty to prevent everything going in 62 # parallel. 63 # 64 .PARALLEL: $($(MACH)_PARALLEL) DUMMY 65 66 # 67 # For build prerequisites we use a special target which is constructed by adding 68 # '.prereq' suffix to the $(MACH)_PREREQ. 69 # 70 PREREQ_TARGET = $($(MACH)_PREREQ:%=%.prereq) 71 72 73 def := TARGET= def 74 all := TARGET= all 75 install := TARGET= install 76 install_h := TARGET= install_h 77 clean := TARGET= clean 78 clobber := TARGET= clobber 79 clobber_h := TARGET= clobber 80 lint := TARGET= lint 81 clean.lint := TARGET= clean.lint 82 check := TARGET= check 83 modlist := TARGET= modlist 84 modlist := NO_STATE= -K $$MODSTATE$$$$ 85 86 .KEEP_STATE: 87 88 def all lint: all_h $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 89 90 install: all_h install_dirs $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 91 92 install_dirs: 93 @cd ..; pwd; $(MAKE) rootdirs 94 @pwd 95 96 # 97 # Rule to build prerequisites. The left part of the pattern will match 98 # PREREQ_TARGET. 99 # 100 # The location of the Makefile is determined by strippinng '.prereq' suffix from 101 # the target name. We add '.prereq' suffix to the target passed to the child 102 # Makefile so that it can distinguish prerequisite build from the regular one. 103 # 104 # 105 %.prereq: 106 @cd $(@:%.prereq=%); pwd; $(MAKE) $(NO_STATE) $(TARGET).prereq 107 108 # 109 # Rule to build architecture files. Build all required prerequisites and then 110 # build the rest (potentially in parallel). 111 # 112 $($(MACH)_ARCHITECTURES): $(PREREQ_TARGET) FRC 113 @cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET) 114 115 $(PMTMO_FILE) pmtmo_file: $(PATCH_MAKEUP_TABLE) 116 @if [ -z "$(PATCH_MAKEUP_TABLE)" ] ; then \ 117 echo 'ERROR: $$(PATCH_MAKEUP_TABLE) not set' \ 118 'in environment' >&2 ; \ 119 exit 1 ; \ 120 fi 121 RELEASE="$(RELEASE)" MACH="$(MACH)" \ 122 $(CTFCVTPTBL) -o $(PMTMO_FILE) $(PATCH_MAKEUP_TABLE) 123 124 # 125 # The following is the list of directories which contain Makefiles with 126 # targets to install header file. The machine independent headers are 127 # installed by invoking the Makefile in the directory containing the 128 # header files. Machine and architecture dependent headers are installed 129 # by invoking the main makefile for that architecture/machine which, 130 # in turn, is responsible for invoking the Makefiles which install headers. 131 # It is done this way so as not to assume that all of the header files in 132 # the architecture/machine dependent subdirectories are in completely 133 # isomorphic locations. 134 # 135 COMMON_HDRDIRS= common/c2 \ 136 common/des \ 137 common/fs \ 138 common/gssapi \ 139 common/idmap \ 140 common/klm \ 141 common/inet \ 142 common/inet/ipf/netinet \ 143 common/inet/kssl \ 144 common/inet/nca \ 145 common/inet/sockmods/netpacket \ 146 common/io/bpf/net \ 147 common/io/fibre-channel/fca/qlc \ 148 common/ipp \ 149 common/net \ 150 common/netinet \ 151 common/nfs \ 152 common/pcmcia/sys \ 153 common/rpc \ 154 common/rpcsvc \ 155 common/sharefs \ 156 common/smb \ 157 common/smbsrv \ 158 common/sys \ 159 common/vm 160 161 162 # 163 # Subset of COMMON_HDRDIRS in which at least one header is generated 164 # at runtime (e.g., rpcgen), and in which "make clean" should run. 165 # Other directories should be included here, but do not yet have the 166 # necessary Makefile support (make clean). 167 # 168 DYNHDRDIRS = common/gssapi \ 169 common/idmap \ 170 common/io/fibre-channel/fca/qlc \ 171 common/klm \ 172 common/rpc \ 173 common/rpcsvc \ 174 common/sys 175 176 sparc_HDRDIRS= sun/sys 177 i386_HDRDIRS= i86pc/vm i86xpv/vm 178 179 HDRDIRS= $(COMMON_HDRDIRS) $($(MACH)_HDRDIRS) 180 install_h check: $(HDRDIRS) $($(MACH)_ARCHITECTURES) 181 182 $(HDRDIRS): FRC 183 @cd $@; pwd; $(MAKE) $(TARGET) 184 185 # ensures that headers made by rpcgen and others are available in uts source 186 # for kernel builds to reference without building install_h 187 # 188 all_h: FRC 189 @cd common/sys; pwd; $(MAKE) $@ 190 @cd common/rpc; pwd; $(MAKE) $@ 191 @cd common/rpcsvc; pwd; $(MAKE) $@ 192 @cd common/gssapi; pwd; $(MAKE) $@ 193 @cd common/idmap; pwd; $(MAKE) $@ 194 @cd common/klm; pwd; $(MAKE) $@ 195 196 clean clobber: $($(MACH)_ARCHITECTURES) $(DYNHDRDIRS) 197 @if [ '$(PATCH_BUILD)' != '#' ] ; then \ 198 echo $(RM) $(PMTMO_FILE) ; \ 199 $(RM) $(PMTMO_FILE) ; \ 200 fi 201 202 # testing convenience 203 clobber_h: $(DYNHDRDIRS) 204 205 clean.lint modlist: $($(MACH)_ARCHITECTURES) 206 207 # 208 # Cross-reference customization: build a cross-reference over all of 209 # the supported architectures. Although there's no correct way to set 210 # the include path (since we don't know what architecture is the one 211 # the user will be interested in), it's historically been set to 212 # mirror the $(XRDIRS) list, and that works kinda sorta okay. 213 # 214 XRDIRS = $(sparc_ARCHITECTURES) $(i386_ARCHITECTURES) sun4 sfmmu \ 215 sun common 216 217 XRINCDIRS = $(XRDIRS) 218 219 cscope.out tags: FRC 220 $(XREF) -x $@ 221 222 FRC: