1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21
22 /*
23 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
24 * Copyright (c) 2012 by Delphix. All rights reserved.
25 * Copyright 2011 Nexenta Systems, Inc. All rights reserved.
26 * Copyright (c) 2012, Joyent, Inc. All rights reserved.
27 */
28
29 /* Portions Copyright 2010 Robert Milkowski */
30
31 #ifndef _SYS_DMU_H
32 #define _SYS_DMU_H
33
34 /*
35 * This file describes the interface that the DMU provides for its
36 * consumers.
37 *
38 * The DMU also interacts with the SPA. That interface is described in
39 * dmu_spa.h.
40 */
41
42 #include <sys/inttypes.h>
43 #include <sys/types.h>
44 #include <sys/param.h>
45 #include <sys/cred.h>
46 #include <sys/time.h>
47
48 #ifdef __cplusplus
49 extern "C" {
50 #endif
51
52 struct uio;
53 struct xuio;
54 struct page;
55 struct vnode;
56 struct spa;
57 struct zilog;
58 struct zio;
59 struct blkptr;
60 struct zap_cursor;
61 struct dsl_dataset;
62 struct dsl_pool;
63 struct dnode;
64 struct drr_begin;
65 struct drr_end;
66 struct zbookmark;
67 struct spa;
68 struct nvlist;
69 struct arc_buf;
70 struct zio_prop;
71 struct sa_handle;
72
73 typedef struct objset objset_t;
74 typedef struct dmu_tx dmu_tx_t;
75 typedef struct dsl_dir dsl_dir_t;
76
77 typedef enum dmu_object_byteswap {
78 DMU_BSWAP_UINT8,
79 DMU_BSWAP_UINT16,
80 DMU_BSWAP_UINT32,
81 DMU_BSWAP_UINT64,
82 DMU_BSWAP_ZAP,
83 DMU_BSWAP_DNODE,
84 DMU_BSWAP_OBJSET,
85 DMU_BSWAP_ZNODE,
86 DMU_BSWAP_OLDACL,
87 DMU_BSWAP_ACL,
88 /*
89 * Allocating a new byteswap type number makes the on-disk format
90 * incompatible with any other format that uses the same number.
91 *
92 * Data can usually be structured to work with one of the
93 * DMU_BSWAP_UINT* or DMU_BSWAP_ZAP types.
94 */
95 DMU_BSWAP_NUMFUNCS
96 } dmu_object_byteswap_t;
97
98 #define DMU_OT_NEWTYPE 0x80
99 #define DMU_OT_METADATA 0x40
100 #define DMU_OT_BYTESWAP_MASK 0x3f
101
102 /*
103 * Defines a uint8_t object type. Object types specify if the data
104 * in the object is metadata (boolean) and how to byteswap the data
105 * (dmu_object_byteswap_t).
106 */
107 #define DMU_OT(byteswap, metadata) \
108 (DMU_OT_NEWTYPE | \
109 ((metadata) ? DMU_OT_METADATA : 0) | \
110 ((byteswap) & DMU_OT_BYTESWAP_MASK))
111
112 #define DMU_OT_IS_VALID(ot) (((ot) & DMU_OT_NEWTYPE) ? \
113 ((ot) & DMU_OT_BYTESWAP_MASK) < DMU_BSWAP_NUMFUNCS : \
114 (ot) < DMU_OT_NUMTYPES)
115
116 #define DMU_OT_IS_METADATA(ot) (((ot) & DMU_OT_NEWTYPE) ? \
117 ((ot) & DMU_OT_METADATA) : \
118 dmu_ot[(ot)].ot_metadata)
119
120 #define DMU_OT_BYTESWAP(ot) (((ot) & DMU_OT_NEWTYPE) ? \
121 ((ot) & DMU_OT_BYTESWAP_MASK) : \
122 dmu_ot[(ot)].ot_byteswap)
123
124 typedef enum dmu_object_type {
125 DMU_OT_NONE,
126 /* general: */
127 DMU_OT_OBJECT_DIRECTORY, /* ZAP */
128 DMU_OT_OBJECT_ARRAY, /* UINT64 */
129 DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */
130 DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */
131 DMU_OT_BPOBJ, /* UINT64 */
132 DMU_OT_BPOBJ_HDR, /* UINT64 */
133 /* spa: */
134 DMU_OT_SPACE_MAP_HEADER, /* UINT64 */
135 DMU_OT_SPACE_MAP, /* UINT64 */
136 /* zil: */
137 DMU_OT_INTENT_LOG, /* UINT64 */
138 /* dmu: */
139 DMU_OT_DNODE, /* DNODE */
140 DMU_OT_OBJSET, /* OBJSET */
141 /* dsl: */
142 DMU_OT_DSL_DIR, /* UINT64 */
143 DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */
144 DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */
145 DMU_OT_DSL_PROPS, /* ZAP */
146 DMU_OT_DSL_DATASET, /* UINT64 */
147 /* zpl: */
148 DMU_OT_ZNODE, /* ZNODE */
149 DMU_OT_OLDACL, /* Old ACL */
150 DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */
151 DMU_OT_DIRECTORY_CONTENTS, /* ZAP */
152 DMU_OT_MASTER_NODE, /* ZAP */
153 DMU_OT_UNLINKED_SET, /* ZAP */
154 /* zvol: */
155 DMU_OT_ZVOL, /* UINT8 */
156 DMU_OT_ZVOL_PROP, /* ZAP */
157 /* other; for testing only! */
158 DMU_OT_PLAIN_OTHER, /* UINT8 */
159 DMU_OT_UINT64_OTHER, /* UINT64 */
160 DMU_OT_ZAP_OTHER, /* ZAP */
161 /* new object types: */
162 DMU_OT_ERROR_LOG, /* ZAP */
163 DMU_OT_SPA_HISTORY, /* UINT8 */
164 DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */
165 DMU_OT_POOL_PROPS, /* ZAP */
166 DMU_OT_DSL_PERMS, /* ZAP */
167 DMU_OT_ACL, /* ACL */
168 DMU_OT_SYSACL, /* SYSACL */
169 DMU_OT_FUID, /* FUID table (Packed NVLIST UINT8) */
170 DMU_OT_FUID_SIZE, /* FUID table size UINT64 */
171 DMU_OT_NEXT_CLONES, /* ZAP */
172 DMU_OT_SCAN_QUEUE, /* ZAP */
173 DMU_OT_USERGROUP_USED, /* ZAP */
174 DMU_OT_USERGROUP_QUOTA, /* ZAP */
175 DMU_OT_USERREFS, /* ZAP */
176 DMU_OT_DDT_ZAP, /* ZAP */
177 DMU_OT_DDT_STATS, /* ZAP */
178 DMU_OT_SA, /* System attr */
179 DMU_OT_SA_MASTER_NODE, /* ZAP */
180 DMU_OT_SA_ATTR_REGISTRATION, /* ZAP */
181 DMU_OT_SA_ATTR_LAYOUTS, /* ZAP */
182 DMU_OT_SCAN_XLATE, /* ZAP */
183 DMU_OT_DEDUP, /* fake dedup BP from ddt_bp_create() */
184 DMU_OT_DEADLIST, /* ZAP */
185 DMU_OT_DEADLIST_HDR, /* UINT64 */
186 DMU_OT_DSL_CLONES, /* ZAP */
187 DMU_OT_BPOBJ_SUBOBJ, /* UINT64 */
188 /*
189 * Do not allocate new object types here. Doing so makes the on-disk
190 * format incompatible with any other format that uses the same object
191 * type number.
192 *
193 * When creating an object which does not have one of the above types
194 * use the DMU_OTN_* type with the correct byteswap and metadata
195 * values.
196 *
197 * The DMU_OTN_* types do not have entries in the dmu_ot table,
198 * use the DMU_OT_IS_METDATA() and DMU_OT_BYTESWAP() macros instead
199 * of indexing into dmu_ot directly (this works for both DMU_OT_* types
200 * and DMU_OTN_* types).
201 */
202 DMU_OT_NUMTYPES,
203
204 /*
205 * Names for valid types declared with DMU_OT().
206 */
207 DMU_OTN_UINT8_DATA = DMU_OT(DMU_BSWAP_UINT8, B_FALSE),
208 DMU_OTN_UINT8_METADATA = DMU_OT(DMU_BSWAP_UINT8, B_TRUE),
209 DMU_OTN_UINT16_DATA = DMU_OT(DMU_BSWAP_UINT16, B_FALSE),
210 DMU_OTN_UINT16_METADATA = DMU_OT(DMU_BSWAP_UINT16, B_TRUE),
211 DMU_OTN_UINT32_DATA = DMU_OT(DMU_BSWAP_UINT32, B_FALSE),
212 DMU_OTN_UINT32_METADATA = DMU_OT(DMU_BSWAP_UINT32, B_TRUE),
213 DMU_OTN_UINT64_DATA = DMU_OT(DMU_BSWAP_UINT64, B_FALSE),
214 DMU_OTN_UINT64_METADATA = DMU_OT(DMU_BSWAP_UINT64, B_TRUE),
215 DMU_OTN_ZAP_DATA = DMU_OT(DMU_BSWAP_ZAP, B_FALSE),
216 DMU_OTN_ZAP_METADATA = DMU_OT(DMU_BSWAP_ZAP, B_TRUE),
217 } dmu_object_type_t;
218
219 typedef enum dmu_objset_type {
220 DMU_OST_NONE,
221 DMU_OST_META,
222 DMU_OST_ZFS,
223 DMU_OST_ZVOL,
224 DMU_OST_OTHER, /* For testing only! */
225 DMU_OST_ANY, /* Be careful! */
226 DMU_OST_NUMTYPES
227 } dmu_objset_type_t;
228
229 void byteswap_uint64_array(void *buf, size_t size);
230 void byteswap_uint32_array(void *buf, size_t size);
231 void byteswap_uint16_array(void *buf, size_t size);
232 void byteswap_uint8_array(void *buf, size_t size);
233 void zap_byteswap(void *buf, size_t size);
234 void zfs_oldacl_byteswap(void *buf, size_t size);
235 void zfs_acl_byteswap(void *buf, size_t size);
236 void zfs_znode_byteswap(void *buf, size_t size);
237
238 #define DS_FIND_SNAPSHOTS (1<<0)
239 #define DS_FIND_CHILDREN (1<<1)
240
241 /*
242 * The maximum number of bytes that can be accessed as part of one
243 * operation, including metadata.
244 */
245 #define DMU_MAX_ACCESS (10<<20) /* 10MB */
246 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */
247
248 #define DMU_USERUSED_OBJECT (-1ULL)
249 #define DMU_GROUPUSED_OBJECT (-2ULL)
250 #define DMU_DEADLIST_OBJECT (-3ULL)
251
252 /*
253 * artificial blkids for bonus buffer and spill blocks
254 */
255 #define DMU_BONUS_BLKID (-1ULL)
256 #define DMU_SPILL_BLKID (-2ULL)
257 /*
258 * Public routines to create, destroy, open, and close objsets.
259 */
260 int dmu_objset_hold(const char *name, void *tag, objset_t **osp);
261 int dmu_objset_own(const char *name, dmu_objset_type_t type,
262 boolean_t readonly, void *tag, objset_t **osp);
263 void dmu_objset_rele(objset_t *os, void *tag);
264 void dmu_objset_disown(objset_t *os, void *tag);
265 int dmu_objset_open_ds(struct dsl_dataset *ds, objset_t **osp);
266
267 int dmu_objset_evict_dbufs(objset_t *os);
268 int dmu_objset_create(const char *name, dmu_objset_type_t type, uint64_t flags,
269 void (*func)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx), void *arg);
270 int dmu_objset_clone(const char *name, struct dsl_dataset *clone_origin,
271 uint64_t flags);
272 int dmu_objset_destroy(const char *name, boolean_t defer);
273 int dmu_snapshots_destroy_nvl(struct nvlist *snaps, boolean_t defer, char *);
274 int dmu_objset_snapshot(char *fsname, char *snapname, char *tag,
275 struct nvlist *props, boolean_t recursive, boolean_t temporary, int fd);
276 int dmu_objset_rename(const char *name, const char *newname,
277 boolean_t recursive);
278 int dmu_objset_find(char *name, int func(const char *, void *), void *arg,
279 int flags);
280 void dmu_objset_byteswap(void *buf, size_t size);
281
282 typedef struct dmu_buf {
283 uint64_t db_object; /* object that this buffer is part of */
284 uint64_t db_offset; /* byte offset in this object */
285 uint64_t db_size; /* size of buffer in bytes */
286 void *db_data; /* data in buffer */
287 } dmu_buf_t;
288
289 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr);
290
291 /*
292 * The names of zap entries in the DIRECTORY_OBJECT of the MOS.
293 */
294 #define DMU_POOL_DIRECTORY_OBJECT 1
295 #define DMU_POOL_CONFIG "config"
296 #define DMU_POOL_FEATURES_FOR_WRITE "features_for_write"
297 #define DMU_POOL_FEATURES_FOR_READ "features_for_read"
298 #define DMU_POOL_FEATURE_DESCRIPTIONS "feature_descriptions"
299 #define DMU_POOL_ROOT_DATASET "root_dataset"
300 #define DMU_POOL_SYNC_BPOBJ "sync_bplist"
301 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub"
302 #define DMU_POOL_ERRLOG_LAST "errlog_last"
303 #define DMU_POOL_SPARES "spares"
304 #define DMU_POOL_DEFLATE "deflate"
305 #define DMU_POOL_HISTORY "history"
306 #define DMU_POOL_PROPS "pool_props"
307 #define DMU_POOL_L2CACHE "l2cache"
308 #define DMU_POOL_TMP_USERREFS "tmp_userrefs"
309 #define DMU_POOL_DDT "DDT-%s-%s-%s"
310 #define DMU_POOL_DDT_STATS "DDT-statistics"
311 #define DMU_POOL_CREATION_VERSION "creation_version"
312 #define DMU_POOL_SCAN "scan"
313 #define DMU_POOL_FREE_BPOBJ "free_bpobj"
314 #define DMU_POOL_BPTREE_OBJ "bptree_obj"
315
316 /*
317 * Allocate an object from this objset. The range of object numbers
318 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode.
319 *
320 * The transaction must be assigned to a txg. The newly allocated
321 * object will be "held" in the transaction (ie. you can modify the
322 * newly allocated object in this transaction).
323 *
324 * dmu_object_alloc() chooses an object and returns it in *objectp.
325 *
326 * dmu_object_claim() allocates a specific object number. If that
327 * number is already allocated, it fails and returns EEXIST.
328 *
329 * Return 0 on success, or ENOSPC or EEXIST as specified above.
330 */
331 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot,
332 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx);
333 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot,
334 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx);
335 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot,
336 int blocksize, dmu_object_type_t bonustype, int bonuslen);
337
338 /*
339 * Free an object from this objset.
340 *
341 * The object's data will be freed as well (ie. you don't need to call
342 * dmu_free(object, 0, -1, tx)).
343 *
344 * The object need not be held in the transaction.
345 *
346 * If there are any holds on this object's buffers (via dmu_buf_hold()),
347 * or tx holds on the object (via dmu_tx_hold_object()), you can not
348 * free it; it fails and returns EBUSY.
349 *
350 * If the object is not allocated, it fails and returns ENOENT.
351 *
352 * Return 0 on success, or EBUSY or ENOENT as specified above.
353 */
354 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx);
355
356 /*
357 * Find the next allocated or free object.
358 *
359 * The objectp parameter is in-out. It will be updated to be the next
360 * object which is allocated. Ignore objects which have not been
361 * modified since txg.
362 *
363 * XXX Can only be called on a objset with no dirty data.
364 *
365 * Returns 0 on success, or ENOENT if there are no more objects.
366 */
367 int dmu_object_next(objset_t *os, uint64_t *objectp,
368 boolean_t hole, uint64_t txg);
369
370 /*
371 * Set the data blocksize for an object.
372 *
373 * The object cannot have any blocks allcated beyond the first. If
374 * the first block is allocated already, the new size must be greater
375 * than the current block size. If these conditions are not met,
376 * ENOTSUP will be returned.
377 *
378 * Returns 0 on success, or EBUSY if there are any holds on the object
379 * contents, or ENOTSUP as described above.
380 */
381 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size,
382 int ibs, dmu_tx_t *tx);
383
384 /*
385 * Set the checksum property on a dnode. The new checksum algorithm will
386 * apply to all newly written blocks; existing blocks will not be affected.
387 */
388 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum,
389 dmu_tx_t *tx);
390
391 /*
392 * Set the compress property on a dnode. The new compression algorithm will
393 * apply to all newly written blocks; existing blocks will not be affected.
394 */
395 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress,
396 dmu_tx_t *tx);
397
398 /*
399 * Decide how to write a block: checksum, compression, number of copies, etc.
400 */
401 #define WP_NOFILL 0x1
402 #define WP_DMU_SYNC 0x2
403 #define WP_SPILL 0x4
404
405 void dmu_write_policy(objset_t *os, struct dnode *dn, int level, int wp,
406 struct zio_prop *zp);
407 /*
408 * The bonus data is accessed more or less like a regular buffer.
409 * You must dmu_bonus_hold() to get the buffer, which will give you a
410 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus
411 * data. As with any normal buffer, you must call dmu_buf_read() to
412 * read db_data, dmu_buf_will_dirty() before modifying it, and the
413 * object must be held in an assigned transaction before calling
414 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus
415 * buffer as well. You must release your hold with dmu_buf_rele().
416 */
417 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **);
418 int dmu_bonus_max(void);
419 int dmu_set_bonus(dmu_buf_t *, int, dmu_tx_t *);
420 int dmu_set_bonustype(dmu_buf_t *, dmu_object_type_t, dmu_tx_t *);
421 dmu_object_type_t dmu_get_bonustype(dmu_buf_t *);
422 int dmu_rm_spill(objset_t *, uint64_t, dmu_tx_t *);
423
424 /*
425 * Special spill buffer support used by "SA" framework
426 */
427
428 int dmu_spill_hold_by_bonus(dmu_buf_t *bonus, void *tag, dmu_buf_t **dbp);
429 int dmu_spill_hold_by_dnode(struct dnode *dn, uint32_t flags,
430 void *tag, dmu_buf_t **dbp);
431 int dmu_spill_hold_existing(dmu_buf_t *bonus, void *tag, dmu_buf_t **dbp);
432
433 /*
434 * Obtain the DMU buffer from the specified object which contains the
435 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so
436 * that it will remain in memory. You must release the hold with
437 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your
438 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU.
439 *
440 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill
441 * on the returned buffer before reading or writing the buffer's
442 * db_data. The comments for those routines describe what particular
443 * operations are valid after calling them.
444 *
445 * The object number must be a valid, allocated object number.
446 */
447 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset,
448 void *tag, dmu_buf_t **, int flags);
449 void dmu_buf_add_ref(dmu_buf_t *db, void* tag);
450 void dmu_buf_rele(dmu_buf_t *db, void *tag);
451 uint64_t dmu_buf_refcount(dmu_buf_t *db);
452
453 /*
454 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a
455 * range of an object. A pointer to an array of dmu_buf_t*'s is
456 * returned (in *dbpp).
457 *
458 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and
459 * frees the array. The hold on the array of buffers MUST be released
460 * with dmu_buf_rele_array. You can NOT release the hold on each buffer
461 * individually with dmu_buf_rele.
462 */
463 int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset,
464 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp);
465 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag);
466
467 /*
468 * Returns NULL on success, or the existing user ptr if it's already
469 * been set.
470 *
471 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user().
472 *
473 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which
474 * will be set to db->db_data when you are allowed to access it. Note
475 * that db->db_data (the pointer) can change when you do dmu_buf_read(),
476 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill().
477 * *user_data_ptr_ptr will be set to the new value when it changes.
478 *
479 * If non-NULL, pageout func will be called when this buffer is being
480 * excised from the cache, so that you can clean up the data structure
481 * pointed to by user_ptr.
482 *
483 * dmu_evict_user() will call the pageout func for all buffers in a
484 * objset with a given pageout func.
485 */
486 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr,
487 dmu_buf_evict_func_t *pageout_func);
488 /*
489 * set_user_ie is the same as set_user, but request immediate eviction
490 * when hold count goes to zero.
491 */
492 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr,
493 void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func);
494 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr,
495 void *user_ptr, void *user_data_ptr_ptr,
496 dmu_buf_evict_func_t *pageout_func);
497 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func);
498
499 /*
500 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set.
501 */
502 void *dmu_buf_get_user(dmu_buf_t *db);
503
504 /*
505 * Indicate that you are going to modify the buffer's data (db_data).
506 *
507 * The transaction (tx) must be assigned to a txg (ie. you've called
508 * dmu_tx_assign()). The buffer's object must be held in the tx
509 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)).
510 */
511 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx);
512
513 /*
514 * Tells if the given dbuf is freeable.
515 */
516 boolean_t dmu_buf_freeable(dmu_buf_t *);
517
518 /*
519 * You must create a transaction, then hold the objects which you will
520 * (or might) modify as part of this transaction. Then you must assign
521 * the transaction to a transaction group. Once the transaction has
522 * been assigned, you can modify buffers which belong to held objects as
523 * part of this transaction. You can't modify buffers before the
524 * transaction has been assigned; you can't modify buffers which don't
525 * belong to objects which this transaction holds; you can't hold
526 * objects once the transaction has been assigned. You may hold an
527 * object which you are going to free (with dmu_object_free()), but you
528 * don't have to.
529 *
530 * You can abort the transaction before it has been assigned.
531 *
532 * Note that you may hold buffers (with dmu_buf_hold) at any time,
533 * regardless of transaction state.
534 */
535
536 #define DMU_NEW_OBJECT (-1ULL)
537 #define DMU_OBJECT_END (-1ULL)
538
539 dmu_tx_t *dmu_tx_create(objset_t *os);
540 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len);
541 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off,
542 uint64_t len);
543 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, const char *name);
544 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object);
545 void dmu_tx_hold_spill(dmu_tx_t *tx, uint64_t object);
546 void dmu_tx_hold_sa(dmu_tx_t *tx, struct sa_handle *hdl, boolean_t may_grow);
547 void dmu_tx_hold_sa_create(dmu_tx_t *tx, int total_size);
548 void dmu_tx_abort(dmu_tx_t *tx);
549 int dmu_tx_assign(dmu_tx_t *tx, uint64_t txg_how);
550 void dmu_tx_wait(dmu_tx_t *tx);
551 void dmu_tx_commit(dmu_tx_t *tx);
552
553 /*
554 * To register a commit callback, dmu_tx_callback_register() must be called.
555 *
556 * dcb_data is a pointer to caller private data that is passed on as a
557 * callback parameter. The caller is responsible for properly allocating and
558 * freeing it.
559 *
560 * When registering a callback, the transaction must be already created, but
561 * it cannot be committed or aborted. It can be assigned to a txg or not.
562 *
563 * The callback will be called after the transaction has been safely written
564 * to stable storage and will also be called if the dmu_tx is aborted.
565 * If there is any error which prevents the transaction from being committed to
566 * disk, the callback will be called with a value of error != 0.
567 */
568 typedef void dmu_tx_callback_func_t(void *dcb_data, int error);
569
570 void dmu_tx_callback_register(dmu_tx_t *tx, dmu_tx_callback_func_t *dcb_func,
571 void *dcb_data);
572
573 /*
574 * Free up the data blocks for a defined range of a file. If size is
575 * -1, the range from offset to end-of-file is freed.
576 */
577 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset,
578 uint64_t size, dmu_tx_t *tx);
579 int dmu_free_long_range(objset_t *os, uint64_t object, uint64_t offset,
580 uint64_t size);
581 int dmu_free_object(objset_t *os, uint64_t object);
582
583 /*
584 * Convenience functions.
585 *
586 * Canfail routines will return 0 on success, or an errno if there is a
587 * nonrecoverable I/O error.
588 */
589 #define DMU_READ_PREFETCH 0 /* prefetch */
590 #define DMU_READ_NO_PREFETCH 1 /* don't prefetch */
591 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size,
592 void *buf, uint32_t flags);
593 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size,
594 const void *buf, dmu_tx_t *tx);
595 void dmu_prealloc(objset_t *os, uint64_t object, uint64_t offset, uint64_t size,
596 dmu_tx_t *tx);
597 int dmu_read_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size);
598 int dmu_write_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size,
599 dmu_tx_t *tx);
600 int dmu_write_uio_dbuf(dmu_buf_t *zdb, struct uio *uio, uint64_t size,
601 dmu_tx_t *tx);
602 int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset,
603 uint64_t size, struct page *pp, dmu_tx_t *tx);
604 struct arc_buf *dmu_request_arcbuf(dmu_buf_t *handle, int size);
605 void dmu_return_arcbuf(struct arc_buf *buf);
606 void dmu_assign_arcbuf(dmu_buf_t *handle, uint64_t offset, struct arc_buf *buf,
607 dmu_tx_t *tx);
608 int dmu_xuio_init(struct xuio *uio, int niov);
609 void dmu_xuio_fini(struct xuio *uio);
610 int dmu_xuio_add(struct xuio *uio, struct arc_buf *abuf, offset_t off,
611 size_t n);
612 int dmu_xuio_cnt(struct xuio *uio);
613 struct arc_buf *dmu_xuio_arcbuf(struct xuio *uio, int i);
614 void dmu_xuio_clear(struct xuio *uio, int i);
615 void xuio_stat_wbuf_copied();
616 void xuio_stat_wbuf_nocopy();
617
618 extern int zfs_prefetch_disable;
619
620 /*
621 * Asynchronously try to read in the data.
622 */
623 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset,
624 uint64_t len);
625
626 typedef struct dmu_object_info {
627 /* All sizes are in bytes unless otherwise indicated. */
628 uint32_t doi_data_block_size;
629 uint32_t doi_metadata_block_size;
630 dmu_object_type_t doi_type;
631 dmu_object_type_t doi_bonus_type;
632 uint64_t doi_bonus_size;
633 uint8_t doi_indirection; /* 2 = dnode->indirect->data */
634 uint8_t doi_checksum;
635 uint8_t doi_compress;
636 uint8_t doi_pad[5];
637 uint64_t doi_physical_blocks_512; /* data + metadata, 512b blks */
638 uint64_t doi_max_offset;
639 uint64_t doi_fill_count; /* number of non-empty blocks */
640 } dmu_object_info_t;
641
642 typedef void arc_byteswap_func_t(void *buf, size_t size);
643
644 typedef struct dmu_object_type_info {
645 dmu_object_byteswap_t ot_byteswap;
646 boolean_t ot_metadata;
647 char *ot_name;
648 } dmu_object_type_info_t;
649
650 typedef struct dmu_object_byteswap_info {
651 arc_byteswap_func_t *ob_func;
652 char *ob_name;
653 } dmu_object_byteswap_info_t;
654
655 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES];
656 extern const dmu_object_byteswap_info_t dmu_ot_byteswap[DMU_BSWAP_NUMFUNCS];
657
658 /*
659 * Get information on a DMU object.
660 *
661 * Return 0 on success or ENOENT if object is not allocated.
662 *
663 * If doi is NULL, just indicates whether the object exists.
664 */
665 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi);
666 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi);
667 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi);
668 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize,
669 u_longlong_t *nblk512);
670
671 typedef struct dmu_objset_stats {
672 uint64_t dds_num_clones; /* number of clones of this */
673 uint64_t dds_creation_txg;
674 uint64_t dds_guid;
675 dmu_objset_type_t dds_type;
676 uint8_t dds_is_snapshot;
677 uint8_t dds_inconsistent;
678 char dds_origin[MAXNAMELEN];
679 } dmu_objset_stats_t;
680
681 /*
682 * Get stats on a dataset.
683 */
684 void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat);
685
686 /*
687 * Add entries to the nvlist for all the objset's properties. See
688 * zfs_prop_table[] and zfs(1m) for details on the properties.
689 */
690 void dmu_objset_stats(objset_t *os, struct nvlist *nv);
691
692 /*
693 * Get the space usage statistics for statvfs().
694 *
695 * refdbytes is the amount of space "referenced" by this objset.
696 * availbytes is the amount of space available to this objset, taking
697 * into account quotas & reservations, assuming that no other objsets
698 * use the space first. These values correspond to the 'referenced' and
699 * 'available' properties, described in the zfs(1m) manpage.
700 *
701 * usedobjs and availobjs are the number of objects currently allocated,
702 * and available.
703 */
704 void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp,
705 uint64_t *usedobjsp, uint64_t *availobjsp);
706
707 /*
708 * The fsid_guid is a 56-bit ID that can change to avoid collisions.
709 * (Contrast with the ds_guid which is a 64-bit ID that will never
710 * change, so there is a small probability that it will collide.)
711 */
712 uint64_t dmu_objset_fsid_guid(objset_t *os);
713
714 /*
715 * Get the [cm]time for an objset's snapshot dir
716 */
717 timestruc_t dmu_objset_snap_cmtime(objset_t *os);
718
719 int dmu_objset_is_snapshot(objset_t *os);
720
721 extern struct spa *dmu_objset_spa(objset_t *os);
722 extern struct zilog *dmu_objset_zil(objset_t *os);
723 extern struct dsl_pool *dmu_objset_pool(objset_t *os);
724 extern struct dsl_dataset *dmu_objset_ds(objset_t *os);
725 extern void dmu_objset_name(objset_t *os, char *buf);
726 extern dmu_objset_type_t dmu_objset_type(objset_t *os);
727 extern uint64_t dmu_objset_id(objset_t *os);
728 extern uint64_t dmu_objset_syncprop(objset_t *os);
729 extern uint64_t dmu_objset_logbias(objset_t *os);
730 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name,
731 uint64_t *id, uint64_t *offp, boolean_t *case_conflict);
732 extern int dmu_snapshot_realname(objset_t *os, char *name, char *real,
733 int maxlen, boolean_t *conflict);
734 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name,
735 uint64_t *idp, uint64_t *offp);
736
737 typedef int objset_used_cb_t(dmu_object_type_t bonustype,
738 void *bonus, uint64_t *userp, uint64_t *groupp);
739 extern void dmu_objset_register_type(dmu_objset_type_t ost,
740 objset_used_cb_t *cb);
741 extern void dmu_objset_set_user(objset_t *os, void *user_ptr);
742 extern void *dmu_objset_get_user(objset_t *os);
743
744 /*
745 * Return the txg number for the given assigned transaction.
746 */
747 uint64_t dmu_tx_get_txg(dmu_tx_t *tx);
748
749 /*
750 * Synchronous write.
751 * If a parent zio is provided this function initiates a write on the
752 * provided buffer as a child of the parent zio.
753 * In the absence of a parent zio, the write is completed synchronously.
754 * At write completion, blk is filled with the bp of the written block.
755 * Note that while the data covered by this function will be on stable
756 * storage when the write completes this new data does not become a
757 * permanent part of the file until the associated transaction commits.
758 */
759
760 /*
761 * {zfs,zvol,ztest}_get_done() args
762 */
763 typedef struct zgd {
764 struct zilog *zgd_zilog;
765 struct blkptr *zgd_bp;
766 dmu_buf_t *zgd_db;
767 struct rl *zgd_rl;
768 void *zgd_private;
769 } zgd_t;
770
771 typedef void dmu_sync_cb_t(zgd_t *arg, int error);
772 int dmu_sync(struct zio *zio, uint64_t txg, dmu_sync_cb_t *done, zgd_t *zgd);
773
774 /*
775 * Find the next hole or data block in file starting at *off
776 * Return found offset in *off. Return ESRCH for end of file.
777 */
778 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole,
779 uint64_t *off);
780
781 /*
782 * Initial setup and final teardown.
783 */
784 extern void dmu_init(void);
785 extern void dmu_fini(void);
786
787 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp,
788 uint64_t object, uint64_t offset, int len);
789 void dmu_traverse_objset(objset_t *os, uint64_t txg_start,
790 dmu_traverse_cb_t cb, void *arg);
791
792 int dmu_send(objset_t *tosnap, objset_t *fromsnap, boolean_t fromorigin,
793 int outfd, struct vnode *vp, offset_t *off);
794 int dmu_send_estimate(objset_t *tosnap, objset_t *fromsnap, boolean_t fromorign,
795 uint64_t *sizep);
796
797 typedef struct dmu_recv_cookie {
798 /*
799 * This structure is opaque!
800 *
801 * If logical and real are different, we are recving the stream
802 * into the "real" temporary clone, and then switching it with
803 * the "logical" target.
804 */
805 struct dsl_dataset *drc_logical_ds;
806 struct dsl_dataset *drc_real_ds;
807 struct drr_begin *drc_drrb;
808 char *drc_tosnap;
809 char *drc_top_ds;
810 boolean_t drc_newfs;
811 boolean_t drc_force;
812 struct avl_tree *drc_guid_to_ds_map;
813 } dmu_recv_cookie_t;
814
815 int dmu_recv_begin(char *tofs, char *tosnap, char *topds, struct drr_begin *,
816 boolean_t force, objset_t *origin, dmu_recv_cookie_t *);
817 int dmu_recv_stream(dmu_recv_cookie_t *drc, struct vnode *vp, offset_t *voffp,
818 int cleanup_fd, uint64_t *action_handlep);
819 int dmu_recv_end(dmu_recv_cookie_t *drc);
820
821 int dmu_diff(objset_t *tosnap, objset_t *fromsnap, struct vnode *vp,
822 offset_t *off);
823
824 /* CRC64 table */
825 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */
826 extern uint64_t zfs_crc64_table[256];
827
828 #ifdef __cplusplus
829 }
830 #endif
831
832 #endif /* _SYS_DMU_H */