7127 remove -Wno-missing-braces from Makefile.uts
1 /*
2 * This file is provided under a CDDLv1 license. When using or
3 * redistributing this file, you may do so under this license.
4 * In redistributing this file this license must be included
5 * and no other modification of this header file is permitted.
6 *
7 * CDDL LICENSE SUMMARY
8 *
9 * Copyright(c) 1999 - 2009 Intel Corporation. All rights reserved.
10 *
11 * The contents of this file are subject to the terms of Version
12 * 1.0 of the Common Development and Distribution License (the "License").
13 *
14 * You should have received a copy of the License with this software.
15 * You can obtain a copy of the License at
16 * http://www.opensolaris.org/os/licensing.
17 * See the License for the specific language governing permissions
18 * and limitations under the License.
19 */
20
21 /*
22 * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
23 */
24
25 /*
26 * Copyright 2012 DEY Storage Systems, Inc. All rights reserved.
27 * Copyright 2013 Nexenta Systems, Inc. All rights reserved.
28 * Copyright 2016 Joyent, Inc.
29 */
30
31 /*
32 * **********************************************************************
33 * *
34 * Module Name: *
35 * e1000g_main.c *
36 * *
37 * Abstract: *
38 * This file contains the interface routines for the solaris OS. *
39 * It has all DDI entry point routines and GLD entry point routines. *
40 * *
41 * This file also contains routines that take care of initialization *
42 * uninit routine and interrupt routine. *
43 * *
44 * **********************************************************************
45 */
46
47 #include <sys/dlpi.h>
48 #include <sys/mac.h>
49 #include "e1000g_sw.h"
50 #include "e1000g_debug.h"
51
52 static char ident[] = "Intel PRO/1000 Ethernet";
53 /* LINTED E_STATIC_UNUSED */
54 static char e1000g_version[] = "Driver Ver. 5.3.24";
55
56 /*
57 * Proto types for DDI entry points
58 */
59 static int e1000g_attach(dev_info_t *, ddi_attach_cmd_t);
60 static int e1000g_detach(dev_info_t *, ddi_detach_cmd_t);
61 static int e1000g_quiesce(dev_info_t *);
62
63 /*
64 * init and intr routines prototype
65 */
66 static int e1000g_resume(dev_info_t *);
67 static int e1000g_suspend(dev_info_t *);
68 static uint_t e1000g_intr_pciexpress(caddr_t);
69 static uint_t e1000g_intr(caddr_t);
70 static void e1000g_intr_work(struct e1000g *, uint32_t);
71 #pragma inline(e1000g_intr_work)
72 static int e1000g_init(struct e1000g *);
73 static int e1000g_start(struct e1000g *, boolean_t);
74 static void e1000g_stop(struct e1000g *, boolean_t);
75 static int e1000g_m_start(void *);
76 static void e1000g_m_stop(void *);
77 static int e1000g_m_promisc(void *, boolean_t);
78 static boolean_t e1000g_m_getcapab(void *, mac_capab_t, void *);
79 static int e1000g_m_multicst(void *, boolean_t, const uint8_t *);
80 static void e1000g_m_ioctl(void *, queue_t *, mblk_t *);
81 static int e1000g_m_setprop(void *, const char *, mac_prop_id_t,
82 uint_t, const void *);
83 static int e1000g_m_getprop(void *, const char *, mac_prop_id_t,
84 uint_t, void *);
85 static void e1000g_m_propinfo(void *, const char *, mac_prop_id_t,
86 mac_prop_info_handle_t);
87 static int e1000g_set_priv_prop(struct e1000g *, const char *, uint_t,
88 const void *);
89 static int e1000g_get_priv_prop(struct e1000g *, const char *, uint_t, void *);
90 static void e1000g_init_locks(struct e1000g *);
91 static void e1000g_destroy_locks(struct e1000g *);
92 static int e1000g_identify_hardware(struct e1000g *);
93 static int e1000g_regs_map(struct e1000g *);
94 static int e1000g_set_driver_params(struct e1000g *);
95 static void e1000g_set_bufsize(struct e1000g *);
96 static int e1000g_register_mac(struct e1000g *);
97 static boolean_t e1000g_rx_drain(struct e1000g *);
98 static boolean_t e1000g_tx_drain(struct e1000g *);
99 static void e1000g_init_unicst(struct e1000g *);
100 static int e1000g_unicst_set(struct e1000g *, const uint8_t *, int);
101 static int e1000g_alloc_rx_data(struct e1000g *);
102 static void e1000g_release_multicast(struct e1000g *);
103 static void e1000g_pch_limits(struct e1000g *);
104 static uint32_t e1000g_mtu2maxframe(uint32_t);
105
106 /*
107 * Local routines
108 */
109 static boolean_t e1000g_reset_adapter(struct e1000g *);
110 static void e1000g_tx_clean(struct e1000g *);
111 static void e1000g_rx_clean(struct e1000g *);
112 static void e1000g_link_timer(void *);
113 static void e1000g_local_timer(void *);
114 static boolean_t e1000g_link_check(struct e1000g *);
115 static boolean_t e1000g_stall_check(struct e1000g *);
116 static void e1000g_smartspeed(struct e1000g *);
117 static void e1000g_get_conf(struct e1000g *);
118 static boolean_t e1000g_get_prop(struct e1000g *, char *, int, int, int,
119 int *);
120 static void enable_watchdog_timer(struct e1000g *);
121 static void disable_watchdog_timer(struct e1000g *);
122 static void start_watchdog_timer(struct e1000g *);
123 static void restart_watchdog_timer(struct e1000g *);
124 static void stop_watchdog_timer(struct e1000g *);
125 static void stop_link_timer(struct e1000g *);
126 static void stop_82547_timer(e1000g_tx_ring_t *);
127 static void e1000g_force_speed_duplex(struct e1000g *);
128 static void e1000g_setup_max_mtu(struct e1000g *);
129 static void e1000g_get_max_frame_size(struct e1000g *);
130 static boolean_t is_valid_mac_addr(uint8_t *);
131 static void e1000g_unattach(dev_info_t *, struct e1000g *);
132 static int e1000g_get_bar_info(dev_info_t *, int, bar_info_t *);
133 #ifdef E1000G_DEBUG
134 static void e1000g_ioc_peek_reg(struct e1000g *, e1000g_peekpoke_t *);
135 static void e1000g_ioc_poke_reg(struct e1000g *, e1000g_peekpoke_t *);
136 static void e1000g_ioc_peek_mem(struct e1000g *, e1000g_peekpoke_t *);
137 static void e1000g_ioc_poke_mem(struct e1000g *, e1000g_peekpoke_t *);
138 static enum ioc_reply e1000g_pp_ioctl(struct e1000g *,
139 struct iocblk *, mblk_t *);
140 #endif
141 static enum ioc_reply e1000g_loopback_ioctl(struct e1000g *,
142 struct iocblk *, mblk_t *);
143 static boolean_t e1000g_check_loopback_support(struct e1000_hw *);
144 static boolean_t e1000g_set_loopback_mode(struct e1000g *, uint32_t);
145 static void e1000g_set_internal_loopback(struct e1000g *);
146 static void e1000g_set_external_loopback_1000(struct e1000g *);
147 static void e1000g_set_external_loopback_100(struct e1000g *);
148 static void e1000g_set_external_loopback_10(struct e1000g *);
149 static int e1000g_add_intrs(struct e1000g *);
150 static int e1000g_intr_add(struct e1000g *, int);
151 static int e1000g_rem_intrs(struct e1000g *);
152 static int e1000g_enable_intrs(struct e1000g *);
153 static int e1000g_disable_intrs(struct e1000g *);
154 static boolean_t e1000g_link_up(struct e1000g *);
155 #ifdef __sparc
156 static boolean_t e1000g_find_mac_address(struct e1000g *);
157 #endif
158 static void e1000g_get_phy_state(struct e1000g *);
159 static int e1000g_fm_error_cb(dev_info_t *dip, ddi_fm_error_t *err,
160 const void *impl_data);
161 static void e1000g_fm_init(struct e1000g *Adapter);
162 static void e1000g_fm_fini(struct e1000g *Adapter);
163 static void e1000g_param_sync(struct e1000g *);
164 static void e1000g_get_driver_control(struct e1000_hw *);
165 static void e1000g_release_driver_control(struct e1000_hw *);
166 static void e1000g_restore_promisc(struct e1000g *Adapter);
167
168 char *e1000g_priv_props[] = {
169 "_tx_bcopy_threshold",
170 "_tx_interrupt_enable",
171 "_tx_intr_delay",
172 "_tx_intr_abs_delay",
173 "_rx_bcopy_threshold",
174 "_max_num_rcv_packets",
175 "_rx_intr_delay",
176 "_rx_intr_abs_delay",
177 "_intr_throttling_rate",
178 "_intr_adaptive",
179 "_adv_pause_cap",
180 "_adv_asym_pause_cap",
181 NULL
182 };
183
184 static struct cb_ops cb_ws_ops = {
185 nulldev, /* cb_open */
186 nulldev, /* cb_close */
187 nodev, /* cb_strategy */
188 nodev, /* cb_print */
189 nodev, /* cb_dump */
190 nodev, /* cb_read */
191 nodev, /* cb_write */
192 nodev, /* cb_ioctl */
193 nodev, /* cb_devmap */
194 nodev, /* cb_mmap */
195 nodev, /* cb_segmap */
196 nochpoll, /* cb_chpoll */
197 ddi_prop_op, /* cb_prop_op */
198 NULL, /* cb_stream */
199 D_MP | D_HOTPLUG, /* cb_flag */
200 CB_REV, /* cb_rev */
201 nodev, /* cb_aread */
202 nodev /* cb_awrite */
203 };
204
205 static struct dev_ops ws_ops = {
206 DEVO_REV, /* devo_rev */
207 0, /* devo_refcnt */
208 NULL, /* devo_getinfo */
209 nulldev, /* devo_identify */
210 nulldev, /* devo_probe */
211 e1000g_attach, /* devo_attach */
212 e1000g_detach, /* devo_detach */
213 nodev, /* devo_reset */
214 &cb_ws_ops, /* devo_cb_ops */
215 NULL, /* devo_bus_ops */
216 ddi_power, /* devo_power */
217 e1000g_quiesce /* devo_quiesce */
218 };
219
220 static struct modldrv modldrv = {
221 &mod_driverops, /* Type of module. This one is a driver */
222 ident, /* Discription string */
223 &ws_ops, /* driver ops */
224 };
225
226 static struct modlinkage modlinkage = {
227 MODREV_1, &modldrv, NULL
228 };
229
230 /* Access attributes for register mapping */
231 static ddi_device_acc_attr_t e1000g_regs_acc_attr = {
232 DDI_DEVICE_ATTR_V1,
233 DDI_STRUCTURE_LE_ACC,
234 DDI_STRICTORDER_ACC,
235 DDI_FLAGERR_ACC
236 };
237
238 #define E1000G_M_CALLBACK_FLAGS \
239 (MC_IOCTL | MC_GETCAPAB | MC_SETPROP | MC_GETPROP | MC_PROPINFO)
240
241 static mac_callbacks_t e1000g_m_callbacks = {
242 E1000G_M_CALLBACK_FLAGS,
243 e1000g_m_stat,
244 e1000g_m_start,
245 e1000g_m_stop,
246 e1000g_m_promisc,
247 e1000g_m_multicst,
248 NULL,
249 e1000g_m_tx,
250 NULL,
251 e1000g_m_ioctl,
252 e1000g_m_getcapab,
253 NULL,
254 NULL,
255 e1000g_m_setprop,
256 e1000g_m_getprop,
257 e1000g_m_propinfo
258 };
259
260 /*
261 * Global variables
262 */
263 uint32_t e1000g_jumbo_mtu = MAXIMUM_MTU_9K;
264 uint32_t e1000g_mblks_pending = 0;
265 /*
266 * Workaround for Dynamic Reconfiguration support, for x86 platform only.
267 * Here we maintain a private dev_info list if e1000g_force_detach is
268 * enabled. If we force the driver to detach while there are still some
269 * rx buffers retained in the upper layer, we have to keep a copy of the
270 * dev_info. In some cases (Dynamic Reconfiguration), the dev_info data
271 * structure will be freed after the driver is detached. However when we
272 * finally free those rx buffers released by the upper layer, we need to
273 * refer to the dev_info to free the dma buffers. So we save a copy of
274 * the dev_info for this purpose. On x86 platform, we assume this copy
275 * of dev_info is always valid, but on SPARC platform, it could be invalid
276 * after the system board level DR operation. For this reason, the global
277 * variable e1000g_force_detach must be B_FALSE on SPARC platform.
278 */
279 #ifdef __sparc
280 boolean_t e1000g_force_detach = B_FALSE;
281 #else
282 boolean_t e1000g_force_detach = B_TRUE;
283 #endif
284 private_devi_list_t *e1000g_private_devi_list = NULL;
285
286 /*
287 * The mutex e1000g_rx_detach_lock is defined to protect the processing of
288 * the private dev_info list, and to serialize the processing of rx buffer
289 * freeing and rx buffer recycling.
290 */
291 kmutex_t e1000g_rx_detach_lock;
292 /*
293 * The rwlock e1000g_dma_type_lock is defined to protect the global flag
294 * e1000g_dma_type. For SPARC, the initial value of the flag is "USE_DVMA".
295 * If there are many e1000g instances, the system may run out of DVMA
296 * resources during the initialization of the instances, then the flag will
297 * be changed to "USE_DMA". Because different e1000g instances are initialized
298 * in parallel, we need to use this lock to protect the flag.
299 */
300 krwlock_t e1000g_dma_type_lock;
301
302 /*
303 * The 82546 chipset is a dual-port device, both the ports share one eeprom.
304 * Based on the information from Intel, the 82546 chipset has some hardware
305 * problem. When one port is being reset and the other port is trying to
306 * access the eeprom, it could cause system hang or panic. To workaround this
307 * hardware problem, we use a global mutex to prevent such operations from
308 * happening simultaneously on different instances. This workaround is applied
309 * to all the devices supported by this driver.
310 */
311 kmutex_t e1000g_nvm_lock;
312
313 /*
314 * Loadable module configuration entry points for the driver
315 */
316
317 /*
318 * _init - module initialization
319 */
320 int
321 _init(void)
322 {
323 int status;
324
325 mac_init_ops(&ws_ops, WSNAME);
326 status = mod_install(&modlinkage);
327 if (status != DDI_SUCCESS)
328 mac_fini_ops(&ws_ops);
329 else {
330 mutex_init(&e1000g_rx_detach_lock, NULL, MUTEX_DRIVER, NULL);
331 rw_init(&e1000g_dma_type_lock, NULL, RW_DRIVER, NULL);
332 mutex_init(&e1000g_nvm_lock, NULL, MUTEX_DRIVER, NULL);
333 }
334
335 return (status);
336 }
337
338 /*
339 * _fini - module finalization
340 */
341 int
342 _fini(void)
343 {
344 int status;
345
346 if (e1000g_mblks_pending != 0)
347 return (EBUSY);
348
349 status = mod_remove(&modlinkage);
350 if (status == DDI_SUCCESS) {
351 mac_fini_ops(&ws_ops);
352
353 if (e1000g_force_detach) {
354 private_devi_list_t *devi_node;
355
356 mutex_enter(&e1000g_rx_detach_lock);
357 while (e1000g_private_devi_list != NULL) {
358 devi_node = e1000g_private_devi_list;
359 e1000g_private_devi_list =
360 e1000g_private_devi_list->next;
361
362 kmem_free(devi_node->priv_dip,
363 sizeof (struct dev_info));
364 kmem_free(devi_node,
365 sizeof (private_devi_list_t));
366 }
367 mutex_exit(&e1000g_rx_detach_lock);
368 }
369
370 mutex_destroy(&e1000g_rx_detach_lock);
371 rw_destroy(&e1000g_dma_type_lock);
372 mutex_destroy(&e1000g_nvm_lock);
373 }
374
375 return (status);
376 }
377
378 /*
379 * _info - module information
380 */
381 int
382 _info(struct modinfo *modinfop)
383 {
384 return (mod_info(&modlinkage, modinfop));
385 }
386
387 /*
388 * e1000g_attach - driver attach
389 *
390 * This function is the device-specific initialization entry
391 * point. This entry point is required and must be written.
392 * The DDI_ATTACH command must be provided in the attach entry
393 * point. When attach() is called with cmd set to DDI_ATTACH,
394 * all normal kernel services (such as kmem_alloc(9F)) are
395 * available for use by the driver.
396 *
397 * The attach() function will be called once for each instance
398 * of the device on the system with cmd set to DDI_ATTACH.
399 * Until attach() succeeds, the only driver entry points which
400 * may be called are open(9E) and getinfo(9E).
401 */
402 static int
403 e1000g_attach(dev_info_t *devinfo, ddi_attach_cmd_t cmd)
404 {
405 struct e1000g *Adapter;
406 struct e1000_hw *hw;
407 struct e1000g_osdep *osdep;
408 int instance;
409
410 switch (cmd) {
411 default:
412 e1000g_log(NULL, CE_WARN,
413 "Unsupported command send to e1000g_attach... ");
414 return (DDI_FAILURE);
415
416 case DDI_RESUME:
417 return (e1000g_resume(devinfo));
418
419 case DDI_ATTACH:
420 break;
421 }
422
423 /*
424 * get device instance number
425 */
426 instance = ddi_get_instance(devinfo);
427
428 /*
429 * Allocate soft data structure
430 */
431 Adapter =
432 (struct e1000g *)kmem_zalloc(sizeof (*Adapter), KM_SLEEP);
433
434 Adapter->dip = devinfo;
435 Adapter->instance = instance;
436 Adapter->tx_ring->adapter = Adapter;
437 Adapter->rx_ring->adapter = Adapter;
438
439 hw = &Adapter->shared;
440 osdep = &Adapter->osdep;
441 hw->back = osdep;
442 osdep->adapter = Adapter;
443
444 ddi_set_driver_private(devinfo, (caddr_t)Adapter);
445
446 /*
447 * Initialize for fma support
448 */
449 (void) e1000g_get_prop(Adapter, "fm-capable",
450 0, 0x0f,
451 DDI_FM_EREPORT_CAPABLE | DDI_FM_ACCCHK_CAPABLE |
452 DDI_FM_DMACHK_CAPABLE | DDI_FM_ERRCB_CAPABLE,
453 &Adapter->fm_capabilities);
454 e1000g_fm_init(Adapter);
455 Adapter->attach_progress |= ATTACH_PROGRESS_FMINIT;
456
457 /*
458 * PCI Configure
459 */
460 if (pci_config_setup(devinfo, &osdep->cfg_handle) != DDI_SUCCESS) {
461 e1000g_log(Adapter, CE_WARN, "PCI configuration failed");
462 goto attach_fail;
463 }
464 Adapter->attach_progress |= ATTACH_PROGRESS_PCI_CONFIG;
465
466 /*
467 * Setup hardware
468 */
469 if (e1000g_identify_hardware(Adapter) != DDI_SUCCESS) {
470 e1000g_log(Adapter, CE_WARN, "Identify hardware failed");
471 goto attach_fail;
472 }
473
474 /*
475 * Map in the device registers.
476 */
477 if (e1000g_regs_map(Adapter) != DDI_SUCCESS) {
478 e1000g_log(Adapter, CE_WARN, "Mapping registers failed");
479 goto attach_fail;
480 }
481 Adapter->attach_progress |= ATTACH_PROGRESS_REGS_MAP;
482
483 /*
484 * Initialize driver parameters
485 */
486 if (e1000g_set_driver_params(Adapter) != DDI_SUCCESS) {
487 goto attach_fail;
488 }
489 Adapter->attach_progress |= ATTACH_PROGRESS_SETUP;
490
491 if (e1000g_check_acc_handle(Adapter->osdep.cfg_handle) != DDI_FM_OK) {
492 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_LOST);
493 goto attach_fail;
494 }
495
496 /*
497 * Disable ULP support
498 */
499 (void) e1000_disable_ulp_lpt_lp(hw, TRUE);
500
501 /*
502 * Initialize interrupts
503 */
504 if (e1000g_add_intrs(Adapter) != DDI_SUCCESS) {
505 e1000g_log(Adapter, CE_WARN, "Add interrupts failed");
506 goto attach_fail;
507 }
508 Adapter->attach_progress |= ATTACH_PROGRESS_ADD_INTR;
509
510 /*
511 * Initialize mutex's for this device.
512 * Do this before enabling the interrupt handler and
513 * register the softint to avoid the condition where
514 * interrupt handler can try using uninitialized mutex
515 */
516 e1000g_init_locks(Adapter);
517 Adapter->attach_progress |= ATTACH_PROGRESS_LOCKS;
518
519 /*
520 * Initialize Driver Counters
521 */
522 if (e1000g_init_stats(Adapter) != DDI_SUCCESS) {
523 e1000g_log(Adapter, CE_WARN, "Init stats failed");
524 goto attach_fail;
525 }
526 Adapter->attach_progress |= ATTACH_PROGRESS_KSTATS;
527
528 /*
529 * Initialize chip hardware and software structures
530 */
531 rw_enter(&Adapter->chip_lock, RW_WRITER);
532 if (e1000g_init(Adapter) != DDI_SUCCESS) {
533 rw_exit(&Adapter->chip_lock);
534 e1000g_log(Adapter, CE_WARN, "Adapter initialization failed");
535 goto attach_fail;
536 }
537 rw_exit(&Adapter->chip_lock);
538 Adapter->attach_progress |= ATTACH_PROGRESS_INIT;
539
540 /*
541 * Register the driver to the MAC
542 */
543 if (e1000g_register_mac(Adapter) != DDI_SUCCESS) {
544 e1000g_log(Adapter, CE_WARN, "Register MAC failed");
545 goto attach_fail;
546 }
547 Adapter->attach_progress |= ATTACH_PROGRESS_MAC;
548
549 /*
550 * Now that mutex locks are initialized, and the chip is also
551 * initialized, enable interrupts.
552 */
553 if (e1000g_enable_intrs(Adapter) != DDI_SUCCESS) {
554 e1000g_log(Adapter, CE_WARN, "Enable DDI interrupts failed");
555 goto attach_fail;
556 }
557 Adapter->attach_progress |= ATTACH_PROGRESS_ENABLE_INTR;
558
559 /*
560 * If e1000g_force_detach is enabled, in global private dip list,
561 * we will create a new entry, which maintains the priv_dip for DR
562 * supports after driver detached.
563 */
564 if (e1000g_force_detach) {
565 private_devi_list_t *devi_node;
566
567 Adapter->priv_dip =
568 kmem_zalloc(sizeof (struct dev_info), KM_SLEEP);
569 bcopy(DEVI(devinfo), DEVI(Adapter->priv_dip),
570 sizeof (struct dev_info));
571
572 devi_node =
573 kmem_zalloc(sizeof (private_devi_list_t), KM_SLEEP);
574
575 mutex_enter(&e1000g_rx_detach_lock);
576 devi_node->priv_dip = Adapter->priv_dip;
577 devi_node->flag = E1000G_PRIV_DEVI_ATTACH;
578 devi_node->pending_rx_count = 0;
579
580 Adapter->priv_devi_node = devi_node;
581
582 if (e1000g_private_devi_list == NULL) {
583 devi_node->prev = NULL;
584 devi_node->next = NULL;
585 e1000g_private_devi_list = devi_node;
586 } else {
587 devi_node->prev = NULL;
588 devi_node->next = e1000g_private_devi_list;
589 e1000g_private_devi_list->prev = devi_node;
590 e1000g_private_devi_list = devi_node;
591 }
592 mutex_exit(&e1000g_rx_detach_lock);
593 }
594
595 Adapter->e1000g_state = E1000G_INITIALIZED;
596 return (DDI_SUCCESS);
597
598 attach_fail:
599 e1000g_unattach(devinfo, Adapter);
600 return (DDI_FAILURE);
601 }
602
603 static int
604 e1000g_register_mac(struct e1000g *Adapter)
605 {
606 struct e1000_hw *hw = &Adapter->shared;
607 mac_register_t *mac;
608 int err;
609
610 if ((mac = mac_alloc(MAC_VERSION)) == NULL)
611 return (DDI_FAILURE);
612
613 mac->m_type_ident = MAC_PLUGIN_IDENT_ETHER;
614 mac->m_driver = Adapter;
615 mac->m_dip = Adapter->dip;
616 mac->m_src_addr = hw->mac.addr;
617 mac->m_callbacks = &e1000g_m_callbacks;
618 mac->m_min_sdu = 0;
619 mac->m_max_sdu = Adapter->default_mtu;
620 mac->m_margin = VLAN_TAGSZ;
621 mac->m_priv_props = e1000g_priv_props;
622 mac->m_v12n = MAC_VIRT_LEVEL1;
623
624 err = mac_register(mac, &Adapter->mh);
625 mac_free(mac);
626
627 return (err == 0 ? DDI_SUCCESS : DDI_FAILURE);
628 }
629
630 static int
631 e1000g_identify_hardware(struct e1000g *Adapter)
632 {
633 struct e1000_hw *hw = &Adapter->shared;
634 struct e1000g_osdep *osdep = &Adapter->osdep;
635
636 /* Get the device id */
637 hw->vendor_id =
638 pci_config_get16(osdep->cfg_handle, PCI_CONF_VENID);
639 hw->device_id =
640 pci_config_get16(osdep->cfg_handle, PCI_CONF_DEVID);
641 hw->revision_id =
642 pci_config_get8(osdep->cfg_handle, PCI_CONF_REVID);
643 hw->subsystem_device_id =
644 pci_config_get16(osdep->cfg_handle, PCI_CONF_SUBSYSID);
645 hw->subsystem_vendor_id =
646 pci_config_get16(osdep->cfg_handle, PCI_CONF_SUBVENID);
647
648 if (e1000_set_mac_type(hw) != E1000_SUCCESS) {
649 E1000G_DEBUGLOG_0(Adapter, E1000G_INFO_LEVEL,
650 "MAC type could not be set properly.");
651 return (DDI_FAILURE);
652 }
653
654 return (DDI_SUCCESS);
655 }
656
657 static int
658 e1000g_regs_map(struct e1000g *Adapter)
659 {
660 dev_info_t *devinfo = Adapter->dip;
661 struct e1000_hw *hw = &Adapter->shared;
662 struct e1000g_osdep *osdep = &Adapter->osdep;
663 off_t mem_size;
664 bar_info_t bar_info;
665 int offset, rnumber;
666
667 rnumber = ADAPTER_REG_SET;
668 /* Get size of adapter register memory */
669 if (ddi_dev_regsize(devinfo, rnumber, &mem_size) !=
670 DDI_SUCCESS) {
671 E1000G_DEBUGLOG_0(Adapter, CE_WARN,
672 "ddi_dev_regsize for registers failed");
673 return (DDI_FAILURE);
674 }
675
676 /* Map adapter register memory */
677 if ((ddi_regs_map_setup(devinfo, rnumber,
678 (caddr_t *)&hw->hw_addr, 0, mem_size, &e1000g_regs_acc_attr,
679 &osdep->reg_handle)) != DDI_SUCCESS) {
680 E1000G_DEBUGLOG_0(Adapter, CE_WARN,
681 "ddi_regs_map_setup for registers failed");
682 goto regs_map_fail;
683 }
684
685 /* ICH needs to map flash memory */
686 switch (hw->mac.type) {
687 case e1000_ich8lan:
688 case e1000_ich9lan:
689 case e1000_ich10lan:
690 case e1000_pchlan:
691 case e1000_pch2lan:
692 case e1000_pch_lpt:
693 rnumber = ICH_FLASH_REG_SET;
694
695 /* get flash size */
696 if (ddi_dev_regsize(devinfo, rnumber,
697 &mem_size) != DDI_SUCCESS) {
698 E1000G_DEBUGLOG_0(Adapter, CE_WARN,
699 "ddi_dev_regsize for ICH flash failed");
700 goto regs_map_fail;
701 }
702
703 /* map flash in */
704 if (ddi_regs_map_setup(devinfo, rnumber,
705 (caddr_t *)&hw->flash_address, 0,
706 mem_size, &e1000g_regs_acc_attr,
707 &osdep->ich_flash_handle) != DDI_SUCCESS) {
708 E1000G_DEBUGLOG_0(Adapter, CE_WARN,
709 "ddi_regs_map_setup for ICH flash failed");
710 goto regs_map_fail;
711 }
712 break;
713 case e1000_pch_spt:
714 /*
715 * On the SPT, the device flash is actually in BAR0, not a
716 * separate BAR. Therefore we end up setting the
717 * ich_flash_handle to be the same as the register handle.
718 * We mark the same to reduce the confusion in the other
719 * functions and macros. Though this does make the set up and
720 * tear-down path slightly more complicated.
721 */
722 osdep->ich_flash_handle = osdep->reg_handle;
723 hw->flash_address = hw->hw_addr;
724 default:
725 break;
726 }
727
728 /* map io space */
729 switch (hw->mac.type) {
730 case e1000_82544:
731 case e1000_82540:
732 case e1000_82545:
733 case e1000_82546:
734 case e1000_82541:
735 case e1000_82541_rev_2:
736 /* find the IO bar */
737 rnumber = -1;
738 for (offset = PCI_CONF_BASE1;
739 offset <= PCI_CONF_BASE5; offset += 4) {
740 if (e1000g_get_bar_info(devinfo, offset, &bar_info)
741 != DDI_SUCCESS)
742 continue;
743 if (bar_info.type == E1000G_BAR_IO) {
744 rnumber = bar_info.rnumber;
745 break;
746 }
747 }
748
749 if (rnumber < 0) {
750 E1000G_DEBUGLOG_0(Adapter, CE_WARN,
751 "No io space is found");
752 goto regs_map_fail;
753 }
754
755 /* get io space size */
756 if (ddi_dev_regsize(devinfo, rnumber,
757 &mem_size) != DDI_SUCCESS) {
758 E1000G_DEBUGLOG_0(Adapter, CE_WARN,
759 "ddi_dev_regsize for io space failed");
760 goto regs_map_fail;
761 }
762
763 /* map io space */
764 if ((ddi_regs_map_setup(devinfo, rnumber,
765 (caddr_t *)&hw->io_base, 0, mem_size,
766 &e1000g_regs_acc_attr,
767 &osdep->io_reg_handle)) != DDI_SUCCESS) {
768 E1000G_DEBUGLOG_0(Adapter, CE_WARN,
769 "ddi_regs_map_setup for io space failed");
770 goto regs_map_fail;
771 }
772 break;
773 default:
774 hw->io_base = 0;
775 break;
776 }
777
778 return (DDI_SUCCESS);
779
780 regs_map_fail:
781 if (osdep->reg_handle != NULL)
782 ddi_regs_map_free(&osdep->reg_handle);
783 if (osdep->ich_flash_handle != NULL && hw->mac.type != e1000_pch_spt)
784 ddi_regs_map_free(&osdep->ich_flash_handle);
785 return (DDI_FAILURE);
786 }
787
788 static int
789 e1000g_set_driver_params(struct e1000g *Adapter)
790 {
791 struct e1000_hw *hw;
792
793 hw = &Adapter->shared;
794
795 /* Set MAC type and initialize hardware functions */
796 if (e1000_setup_init_funcs(hw, B_TRUE) != E1000_SUCCESS) {
797 E1000G_DEBUGLOG_0(Adapter, CE_WARN,
798 "Could not setup hardware functions");
799 return (DDI_FAILURE);
800 }
801
802 /* Get bus information */
803 if (e1000_get_bus_info(hw) != E1000_SUCCESS) {
804 E1000G_DEBUGLOG_0(Adapter, CE_WARN,
805 "Could not get bus information");
806 return (DDI_FAILURE);
807 }
808
809 e1000_read_pci_cfg(hw, PCI_COMMAND_REGISTER, &hw->bus.pci_cmd_word);
810
811 hw->mac.autoneg_failed = B_TRUE;
812
813 /* Set the autoneg_wait_to_complete flag to B_FALSE */
814 hw->phy.autoneg_wait_to_complete = B_FALSE;
815
816 /* Adaptive IFS related changes */
817 hw->mac.adaptive_ifs = B_TRUE;
818
819 /* Enable phy init script for IGP phy of 82541/82547 */
820 if ((hw->mac.type == e1000_82547) ||
821 (hw->mac.type == e1000_82541) ||
822 (hw->mac.type == e1000_82547_rev_2) ||
823 (hw->mac.type == e1000_82541_rev_2))
824 e1000_init_script_state_82541(hw, B_TRUE);
825
826 /* Enable the TTL workaround for 82541/82547 */
827 e1000_set_ttl_workaround_state_82541(hw, B_TRUE);
828
829 #ifdef __sparc
830 Adapter->strip_crc = B_TRUE;
831 #else
832 Adapter->strip_crc = B_FALSE;
833 #endif
834
835 /* setup the maximum MTU size of the chip */
836 e1000g_setup_max_mtu(Adapter);
837
838 /* Get speed/duplex settings in conf file */
839 hw->mac.forced_speed_duplex = ADVERTISE_100_FULL;
840 hw->phy.autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
841 e1000g_force_speed_duplex(Adapter);
842
843 /* Get Jumbo Frames settings in conf file */
844 e1000g_get_max_frame_size(Adapter);
845
846 /* Get conf file properties */
847 e1000g_get_conf(Adapter);
848
849 /* enforce PCH limits */
850 e1000g_pch_limits(Adapter);
851
852 /* Set Rx/Tx buffer size */
853 e1000g_set_bufsize(Adapter);
854
855 /* Master Latency Timer */
856 Adapter->master_latency_timer = DEFAULT_MASTER_LATENCY_TIMER;
857
858 /* copper options */
859 if (hw->phy.media_type == e1000_media_type_copper) {
860 hw->phy.mdix = 0; /* AUTO_ALL_MODES */
861 hw->phy.disable_polarity_correction = B_FALSE;
862 hw->phy.ms_type = e1000_ms_hw_default; /* E1000_MASTER_SLAVE */
863 }
864
865 /* The initial link state should be "unknown" */
866 Adapter->link_state = LINK_STATE_UNKNOWN;
867
868 /* Initialize rx parameters */
869 Adapter->rx_intr_delay = DEFAULT_RX_INTR_DELAY;
870 Adapter->rx_intr_abs_delay = DEFAULT_RX_INTR_ABS_DELAY;
871
872 /* Initialize tx parameters */
873 Adapter->tx_intr_enable = DEFAULT_TX_INTR_ENABLE;
874 Adapter->tx_bcopy_thresh = DEFAULT_TX_BCOPY_THRESHOLD;
875 Adapter->tx_intr_delay = DEFAULT_TX_INTR_DELAY;
876 Adapter->tx_intr_abs_delay = DEFAULT_TX_INTR_ABS_DELAY;
877
878 /* Initialize rx parameters */
879 Adapter->rx_bcopy_thresh = DEFAULT_RX_BCOPY_THRESHOLD;
880
881 return (DDI_SUCCESS);
882 }
883
884 static void
885 e1000g_setup_max_mtu(struct e1000g *Adapter)
886 {
887 struct e1000_mac_info *mac = &Adapter->shared.mac;
888 struct e1000_phy_info *phy = &Adapter->shared.phy;
889
890 switch (mac->type) {
891 /* types that do not support jumbo frames */
892 case e1000_ich8lan:
893 case e1000_82573:
894 case e1000_82583:
895 Adapter->max_mtu = ETHERMTU;
896 break;
897 /* ich9 supports jumbo frames except on one phy type */
898 case e1000_ich9lan:
899 if (phy->type == e1000_phy_ife)
900 Adapter->max_mtu = ETHERMTU;
901 else
902 Adapter->max_mtu = MAXIMUM_MTU_9K;
903 break;
904 /* pch can do jumbo frames up to 4K */
905 case e1000_pchlan:
906 Adapter->max_mtu = MAXIMUM_MTU_4K;
907 break;
908 /* pch2 can do jumbo frames up to 9K */
909 case e1000_pch2lan:
910 case e1000_pch_lpt:
911 case e1000_pch_spt:
912 Adapter->max_mtu = MAXIMUM_MTU_9K;
913 break;
914 /* types with a special limit */
915 case e1000_82571:
916 case e1000_82572:
917 case e1000_82574:
918 case e1000_80003es2lan:
919 case e1000_ich10lan:
920 if (e1000g_jumbo_mtu >= ETHERMTU &&
921 e1000g_jumbo_mtu <= MAXIMUM_MTU_9K) {
922 Adapter->max_mtu = e1000g_jumbo_mtu;
923 } else {
924 Adapter->max_mtu = MAXIMUM_MTU_9K;
925 }
926 break;
927 /* default limit is 16K */
928 default:
929 Adapter->max_mtu = FRAME_SIZE_UPTO_16K -
930 sizeof (struct ether_vlan_header) - ETHERFCSL;
931 break;
932 }
933 }
934
935 static void
936 e1000g_set_bufsize(struct e1000g *Adapter)
937 {
938 struct e1000_mac_info *mac = &Adapter->shared.mac;
939 uint64_t rx_size;
940 uint64_t tx_size;
941
942 dev_info_t *devinfo = Adapter->dip;
943 #ifdef __sparc
944 ulong_t iommu_pagesize;
945 #endif
946 /* Get the system page size */
947 Adapter->sys_page_sz = ddi_ptob(devinfo, (ulong_t)1);
948
949 #ifdef __sparc
950 iommu_pagesize = dvma_pagesize(devinfo);
951 if (iommu_pagesize != 0) {
952 if (Adapter->sys_page_sz == iommu_pagesize) {
953 if (iommu_pagesize > 0x4000)
954 Adapter->sys_page_sz = 0x4000;
955 } else {
956 if (Adapter->sys_page_sz > iommu_pagesize)
957 Adapter->sys_page_sz = iommu_pagesize;
958 }
959 }
960 if (Adapter->lso_enable) {
961 Adapter->dvma_page_num = E1000_LSO_MAXLEN /
962 Adapter->sys_page_sz + E1000G_DEFAULT_DVMA_PAGE_NUM;
963 } else {
964 Adapter->dvma_page_num = Adapter->max_frame_size /
965 Adapter->sys_page_sz + E1000G_DEFAULT_DVMA_PAGE_NUM;
966 }
967 ASSERT(Adapter->dvma_page_num >= E1000G_DEFAULT_DVMA_PAGE_NUM);
968 #endif
969
970 Adapter->min_frame_size = ETHERMIN + ETHERFCSL;
971
972 if (Adapter->mem_workaround_82546 &&
973 ((mac->type == e1000_82545) ||
974 (mac->type == e1000_82546) ||
975 (mac->type == e1000_82546_rev_3))) {
976 Adapter->rx_buffer_size = E1000_RX_BUFFER_SIZE_2K;
977 } else {
978 rx_size = Adapter->max_frame_size;
979 if ((rx_size > FRAME_SIZE_UPTO_2K) &&
980 (rx_size <= FRAME_SIZE_UPTO_4K))
981 Adapter->rx_buffer_size = E1000_RX_BUFFER_SIZE_4K;
982 else if ((rx_size > FRAME_SIZE_UPTO_4K) &&
983 (rx_size <= FRAME_SIZE_UPTO_8K))
984 Adapter->rx_buffer_size = E1000_RX_BUFFER_SIZE_8K;
985 else if ((rx_size > FRAME_SIZE_UPTO_8K) &&
986 (rx_size <= FRAME_SIZE_UPTO_16K))
987 Adapter->rx_buffer_size = E1000_RX_BUFFER_SIZE_16K;
988 else
989 Adapter->rx_buffer_size = E1000_RX_BUFFER_SIZE_2K;
990 }
991 Adapter->rx_buffer_size += E1000G_IPALIGNROOM;
992
993 tx_size = Adapter->max_frame_size;
994 if ((tx_size > FRAME_SIZE_UPTO_2K) && (tx_size <= FRAME_SIZE_UPTO_4K))
995 Adapter->tx_buffer_size = E1000_TX_BUFFER_SIZE_4K;
996 else if ((tx_size > FRAME_SIZE_UPTO_4K) &&
997 (tx_size <= FRAME_SIZE_UPTO_8K))
998 Adapter->tx_buffer_size = E1000_TX_BUFFER_SIZE_8K;
999 else if ((tx_size > FRAME_SIZE_UPTO_8K) &&
1000 (tx_size <= FRAME_SIZE_UPTO_16K))
1001 Adapter->tx_buffer_size = E1000_TX_BUFFER_SIZE_16K;
1002 else
1003 Adapter->tx_buffer_size = E1000_TX_BUFFER_SIZE_2K;
1004
1005 /*
1006 * For Wiseman adapters we have an requirement of having receive
1007 * buffers aligned at 256 byte boundary. Since Livengood does not
1008 * require this and forcing it for all hardwares will have
1009 * performance implications, I am making it applicable only for
1010 * Wiseman and for Jumbo frames enabled mode as rest of the time,
1011 * it is okay to have normal frames...but it does involve a
1012 * potential risk where we may loose data if buffer is not
1013 * aligned...so all wiseman boards to have 256 byte aligned
1014 * buffers
1015 */
1016 if (mac->type < e1000_82543)
1017 Adapter->rx_buf_align = RECEIVE_BUFFER_ALIGN_SIZE;
1018 else
1019 Adapter->rx_buf_align = 1;
1020 }
1021
1022 /*
1023 * e1000g_detach - driver detach
1024 *
1025 * The detach() function is the complement of the attach routine.
1026 * If cmd is set to DDI_DETACH, detach() is used to remove the
1027 * state associated with a given instance of a device node
1028 * prior to the removal of that instance from the system.
1029 *
1030 * The detach() function will be called once for each instance
1031 * of the device for which there has been a successful attach()
1032 * once there are no longer any opens on the device.
1033 *
1034 * Interrupts routine are disabled, All memory allocated by this
1035 * driver are freed.
1036 */
1037 static int
1038 e1000g_detach(dev_info_t *devinfo, ddi_detach_cmd_t cmd)
1039 {
1040 struct e1000g *Adapter;
1041 boolean_t rx_drain;
1042
1043 switch (cmd) {
1044 default:
1045 return (DDI_FAILURE);
1046
1047 case DDI_SUSPEND:
1048 return (e1000g_suspend(devinfo));
1049
1050 case DDI_DETACH:
1051 break;
1052 }
1053
1054 Adapter = (struct e1000g *)ddi_get_driver_private(devinfo);
1055 if (Adapter == NULL)
1056 return (DDI_FAILURE);
1057
1058 rx_drain = e1000g_rx_drain(Adapter);
1059 if (!rx_drain && !e1000g_force_detach)
1060 return (DDI_FAILURE);
1061
1062 if (mac_unregister(Adapter->mh) != 0) {
1063 e1000g_log(Adapter, CE_WARN, "Unregister MAC failed");
1064 return (DDI_FAILURE);
1065 }
1066 Adapter->attach_progress &= ~ATTACH_PROGRESS_MAC;
1067
1068 ASSERT(!(Adapter->e1000g_state & E1000G_STARTED));
1069
1070 if (!e1000g_force_detach && !rx_drain)
1071 return (DDI_FAILURE);
1072
1073 e1000g_unattach(devinfo, Adapter);
1074
1075 return (DDI_SUCCESS);
1076 }
1077
1078 /*
1079 * e1000g_free_priv_devi_node - free a priv_dip entry for driver instance
1080 */
1081 void
1082 e1000g_free_priv_devi_node(private_devi_list_t *devi_node)
1083 {
1084 ASSERT(e1000g_private_devi_list != NULL);
1085 ASSERT(devi_node != NULL);
1086
1087 if (devi_node->prev != NULL)
1088 devi_node->prev->next = devi_node->next;
1089 if (devi_node->next != NULL)
1090 devi_node->next->prev = devi_node->prev;
1091 if (devi_node == e1000g_private_devi_list)
1092 e1000g_private_devi_list = devi_node->next;
1093
1094 kmem_free(devi_node->priv_dip,
1095 sizeof (struct dev_info));
1096 kmem_free(devi_node,
1097 sizeof (private_devi_list_t));
1098 }
1099
1100 static void
1101 e1000g_unattach(dev_info_t *devinfo, struct e1000g *Adapter)
1102 {
1103 private_devi_list_t *devi_node;
1104 int result;
1105
1106 if (Adapter->attach_progress & ATTACH_PROGRESS_ENABLE_INTR) {
1107 (void) e1000g_disable_intrs(Adapter);
1108 }
1109
1110 if (Adapter->attach_progress & ATTACH_PROGRESS_MAC) {
1111 (void) mac_unregister(Adapter->mh);
1112 }
1113
1114 if (Adapter->attach_progress & ATTACH_PROGRESS_ADD_INTR) {
1115 (void) e1000g_rem_intrs(Adapter);
1116 }
1117
1118 if (Adapter->attach_progress & ATTACH_PROGRESS_SETUP) {
1119 (void) ddi_prop_remove_all(devinfo);
1120 }
1121
1122 if (Adapter->attach_progress & ATTACH_PROGRESS_KSTATS) {
1123 kstat_delete((kstat_t *)Adapter->e1000g_ksp);
1124 }
1125
1126 if (Adapter->attach_progress & ATTACH_PROGRESS_INIT) {
1127 stop_link_timer(Adapter);
1128
1129 mutex_enter(&e1000g_nvm_lock);
1130 result = e1000_reset_hw(&Adapter->shared);
1131 mutex_exit(&e1000g_nvm_lock);
1132
1133 if (result != E1000_SUCCESS) {
1134 e1000g_fm_ereport(Adapter, DDI_FM_DEVICE_INVAL_STATE);
1135 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_LOST);
1136 }
1137 }
1138
1139 e1000g_release_multicast(Adapter);
1140
1141 if (Adapter->attach_progress & ATTACH_PROGRESS_REGS_MAP) {
1142 if (Adapter->osdep.reg_handle != NULL)
1143 ddi_regs_map_free(&Adapter->osdep.reg_handle);
1144 if (Adapter->osdep.ich_flash_handle != NULL &&
1145 Adapter->shared.mac.type != e1000_pch_spt)
1146 ddi_regs_map_free(&Adapter->osdep.ich_flash_handle);
1147 if (Adapter->osdep.io_reg_handle != NULL)
1148 ddi_regs_map_free(&Adapter->osdep.io_reg_handle);
1149 }
1150
1151 if (Adapter->attach_progress & ATTACH_PROGRESS_PCI_CONFIG) {
1152 if (Adapter->osdep.cfg_handle != NULL)
1153 pci_config_teardown(&Adapter->osdep.cfg_handle);
1154 }
1155
1156 if (Adapter->attach_progress & ATTACH_PROGRESS_LOCKS) {
1157 e1000g_destroy_locks(Adapter);
1158 }
1159
1160 if (Adapter->attach_progress & ATTACH_PROGRESS_FMINIT) {
1161 e1000g_fm_fini(Adapter);
1162 }
1163
1164 mutex_enter(&e1000g_rx_detach_lock);
1165 if (e1000g_force_detach && (Adapter->priv_devi_node != NULL)) {
1166 devi_node = Adapter->priv_devi_node;
1167 devi_node->flag |= E1000G_PRIV_DEVI_DETACH;
1168
1169 if (devi_node->pending_rx_count == 0) {
1170 e1000g_free_priv_devi_node(devi_node);
1171 }
1172 }
1173 mutex_exit(&e1000g_rx_detach_lock);
1174
1175 kmem_free((caddr_t)Adapter, sizeof (struct e1000g));
1176
1177 /*
1178 * Another hotplug spec requirement,
1179 * run ddi_set_driver_private(devinfo, null);
1180 */
1181 ddi_set_driver_private(devinfo, NULL);
1182 }
1183
1184 /*
1185 * Get the BAR type and rnumber for a given PCI BAR offset
1186 */
1187 static int
1188 e1000g_get_bar_info(dev_info_t *dip, int bar_offset, bar_info_t *bar_info)
1189 {
1190 pci_regspec_t *regs;
1191 uint_t regs_length;
1192 int type, rnumber, rcount;
1193
1194 ASSERT((bar_offset >= PCI_CONF_BASE0) &&
1195 (bar_offset <= PCI_CONF_BASE5));
1196
1197 /*
1198 * Get the DDI "reg" property
1199 */
1200 if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip,
1201 DDI_PROP_DONTPASS, "reg", (int **)®s,
1202 ®s_length) != DDI_PROP_SUCCESS) {
1203 return (DDI_FAILURE);
1204 }
1205
1206 rcount = regs_length * sizeof (int) / sizeof (pci_regspec_t);
1207 /*
1208 * Check the BAR offset
1209 */
1210 for (rnumber = 0; rnumber < rcount; ++rnumber) {
1211 if (PCI_REG_REG_G(regs[rnumber].pci_phys_hi) == bar_offset) {
1212 type = regs[rnumber].pci_phys_hi & PCI_ADDR_MASK;
1213 break;
1214 }
1215 }
1216
1217 ddi_prop_free(regs);
1218
1219 if (rnumber >= rcount)
1220 return (DDI_FAILURE);
1221
1222 switch (type) {
1223 case PCI_ADDR_CONFIG:
1224 bar_info->type = E1000G_BAR_CONFIG;
1225 break;
1226 case PCI_ADDR_IO:
1227 bar_info->type = E1000G_BAR_IO;
1228 break;
1229 case PCI_ADDR_MEM32:
1230 bar_info->type = E1000G_BAR_MEM32;
1231 break;
1232 case PCI_ADDR_MEM64:
1233 bar_info->type = E1000G_BAR_MEM64;
1234 break;
1235 default:
1236 return (DDI_FAILURE);
1237 }
1238 bar_info->rnumber = rnumber;
1239 return (DDI_SUCCESS);
1240 }
1241
1242 static void
1243 e1000g_init_locks(struct e1000g *Adapter)
1244 {
1245 e1000g_tx_ring_t *tx_ring;
1246 e1000g_rx_ring_t *rx_ring;
1247
1248 rw_init(&Adapter->chip_lock, NULL,
1249 RW_DRIVER, DDI_INTR_PRI(Adapter->intr_pri));
1250 mutex_init(&Adapter->link_lock, NULL,
1251 MUTEX_DRIVER, DDI_INTR_PRI(Adapter->intr_pri));
1252 mutex_init(&Adapter->watchdog_lock, NULL,
1253 MUTEX_DRIVER, DDI_INTR_PRI(Adapter->intr_pri));
1254
1255 tx_ring = Adapter->tx_ring;
1256
1257 mutex_init(&tx_ring->tx_lock, NULL,
1258 MUTEX_DRIVER, DDI_INTR_PRI(Adapter->intr_pri));
1259 mutex_init(&tx_ring->usedlist_lock, NULL,
1260 MUTEX_DRIVER, DDI_INTR_PRI(Adapter->intr_pri));
1261 mutex_init(&tx_ring->freelist_lock, NULL,
1262 MUTEX_DRIVER, DDI_INTR_PRI(Adapter->intr_pri));
1263
1264 rx_ring = Adapter->rx_ring;
1265
1266 mutex_init(&rx_ring->rx_lock, NULL,
1267 MUTEX_DRIVER, DDI_INTR_PRI(Adapter->intr_pri));
1268 }
1269
1270 static void
1271 e1000g_destroy_locks(struct e1000g *Adapter)
1272 {
1273 e1000g_tx_ring_t *tx_ring;
1274 e1000g_rx_ring_t *rx_ring;
1275
1276 tx_ring = Adapter->tx_ring;
1277 mutex_destroy(&tx_ring->tx_lock);
1278 mutex_destroy(&tx_ring->usedlist_lock);
1279 mutex_destroy(&tx_ring->freelist_lock);
1280
1281 rx_ring = Adapter->rx_ring;
1282 mutex_destroy(&rx_ring->rx_lock);
1283
1284 mutex_destroy(&Adapter->link_lock);
1285 mutex_destroy(&Adapter->watchdog_lock);
1286 rw_destroy(&Adapter->chip_lock);
1287
1288 /* destory mutex initialized in shared code */
1289 e1000_destroy_hw_mutex(&Adapter->shared);
1290 }
1291
1292 static int
1293 e1000g_resume(dev_info_t *devinfo)
1294 {
1295 struct e1000g *Adapter;
1296
1297 Adapter = (struct e1000g *)ddi_get_driver_private(devinfo);
1298 if (Adapter == NULL)
1299 e1000g_log(Adapter, CE_PANIC,
1300 "Instance pointer is null\n");
1301
1302 if (Adapter->dip != devinfo)
1303 e1000g_log(Adapter, CE_PANIC,
1304 "Devinfo is not the same as saved devinfo\n");
1305
1306 rw_enter(&Adapter->chip_lock, RW_WRITER);
1307
1308 if (Adapter->e1000g_state & E1000G_STARTED) {
1309 if (e1000g_start(Adapter, B_FALSE) != DDI_SUCCESS) {
1310 rw_exit(&Adapter->chip_lock);
1311 /*
1312 * We note the failure, but return success, as the
1313 * system is still usable without this controller.
1314 */
1315 e1000g_log(Adapter, CE_WARN,
1316 "e1000g_resume: failed to restart controller\n");
1317 return (DDI_SUCCESS);
1318 }
1319 /* Enable and start the watchdog timer */
1320 enable_watchdog_timer(Adapter);
1321 }
1322
1323 Adapter->e1000g_state &= ~E1000G_SUSPENDED;
1324
1325 rw_exit(&Adapter->chip_lock);
1326
1327 return (DDI_SUCCESS);
1328 }
1329
1330 static int
1331 e1000g_suspend(dev_info_t *devinfo)
1332 {
1333 struct e1000g *Adapter;
1334
1335 Adapter = (struct e1000g *)ddi_get_driver_private(devinfo);
1336 if (Adapter == NULL)
1337 return (DDI_FAILURE);
1338
1339 rw_enter(&Adapter->chip_lock, RW_WRITER);
1340
1341 Adapter->e1000g_state |= E1000G_SUSPENDED;
1342
1343 /* if the port isn't plumbed, we can simply return */
1344 if (!(Adapter->e1000g_state & E1000G_STARTED)) {
1345 rw_exit(&Adapter->chip_lock);
1346 return (DDI_SUCCESS);
1347 }
1348
1349 e1000g_stop(Adapter, B_FALSE);
1350
1351 rw_exit(&Adapter->chip_lock);
1352
1353 /* Disable and stop all the timers */
1354 disable_watchdog_timer(Adapter);
1355 stop_link_timer(Adapter);
1356 stop_82547_timer(Adapter->tx_ring);
1357
1358 return (DDI_SUCCESS);
1359 }
1360
1361 static int
1362 e1000g_init(struct e1000g *Adapter)
1363 {
1364 uint32_t pba;
1365 uint32_t high_water;
1366 struct e1000_hw *hw;
1367 clock_t link_timeout;
1368 int result;
1369
1370 hw = &Adapter->shared;
1371
1372 /*
1373 * reset to put the hardware in a known state
1374 * before we try to do anything with the eeprom
1375 */
1376 mutex_enter(&e1000g_nvm_lock);
1377 result = e1000_reset_hw(hw);
1378 mutex_exit(&e1000g_nvm_lock);
1379
1380 if (result != E1000_SUCCESS) {
1381 e1000g_fm_ereport(Adapter, DDI_FM_DEVICE_INVAL_STATE);
1382 goto init_fail;
1383 }
1384
1385 mutex_enter(&e1000g_nvm_lock);
1386 result = e1000_validate_nvm_checksum(hw);
1387 if (result < E1000_SUCCESS) {
1388 /*
1389 * Some PCI-E parts fail the first check due to
1390 * the link being in sleep state. Call it again,
1391 * if it fails a second time its a real issue.
1392 */
1393 result = e1000_validate_nvm_checksum(hw);
1394 }
1395 mutex_exit(&e1000g_nvm_lock);
1396
1397 if (result < E1000_SUCCESS) {
1398 e1000g_log(Adapter, CE_WARN,
1399 "Invalid NVM checksum. Please contact "
1400 "the vendor to update the NVM.");
1401 e1000g_fm_ereport(Adapter, DDI_FM_DEVICE_INVAL_STATE);
1402 goto init_fail;
1403 }
1404
1405 result = 0;
1406 #ifdef __sparc
1407 /*
1408 * First, we try to get the local ethernet address from OBP. If
1409 * failed, then we get it from the EEPROM of NIC card.
1410 */
1411 result = e1000g_find_mac_address(Adapter);
1412 #endif
1413 /* Get the local ethernet address. */
1414 if (!result) {
1415 mutex_enter(&e1000g_nvm_lock);
1416 result = e1000_read_mac_addr(hw);
1417 mutex_exit(&e1000g_nvm_lock);
1418 }
1419
1420 if (result < E1000_SUCCESS) {
1421 e1000g_log(Adapter, CE_WARN, "Read mac addr failed");
1422 e1000g_fm_ereport(Adapter, DDI_FM_DEVICE_INVAL_STATE);
1423 goto init_fail;
1424 }
1425
1426 /* check for valid mac address */
1427 if (!is_valid_mac_addr(hw->mac.addr)) {
1428 e1000g_log(Adapter, CE_WARN, "Invalid mac addr");
1429 e1000g_fm_ereport(Adapter, DDI_FM_DEVICE_INVAL_STATE);
1430 goto init_fail;
1431 }
1432
1433 /* Set LAA state for 82571 chipset */
1434 e1000_set_laa_state_82571(hw, B_TRUE);
1435
1436 /* Master Latency Timer implementation */
1437 if (Adapter->master_latency_timer) {
1438 pci_config_put8(Adapter->osdep.cfg_handle,
1439 PCI_CONF_LATENCY_TIMER, Adapter->master_latency_timer);
1440 }
1441
1442 if (hw->mac.type < e1000_82547) {
1443 /*
1444 * Total FIFO is 64K
1445 */
1446 if (Adapter->max_frame_size > FRAME_SIZE_UPTO_8K)
1447 pba = E1000_PBA_40K; /* 40K for Rx, 24K for Tx */
1448 else
1449 pba = E1000_PBA_48K; /* 48K for Rx, 16K for Tx */
1450 } else if ((hw->mac.type == e1000_82571) ||
1451 (hw->mac.type == e1000_82572) ||
1452 (hw->mac.type == e1000_80003es2lan)) {
1453 /*
1454 * Total FIFO is 48K
1455 */
1456 if (Adapter->max_frame_size > FRAME_SIZE_UPTO_8K)
1457 pba = E1000_PBA_30K; /* 30K for Rx, 18K for Tx */
1458 else
1459 pba = E1000_PBA_38K; /* 38K for Rx, 10K for Tx */
1460 } else if (hw->mac.type == e1000_82573) {
1461 pba = E1000_PBA_20K; /* 20K for Rx, 12K for Tx */
1462 } else if (hw->mac.type == e1000_82574) {
1463 /* Keep adapter default: 20K for Rx, 20K for Tx */
1464 pba = E1000_READ_REG(hw, E1000_PBA);
1465 } else if (hw->mac.type == e1000_ich8lan) {
1466 pba = E1000_PBA_8K; /* 8K for Rx, 12K for Tx */
1467 } else if (hw->mac.type == e1000_ich9lan) {
1468 pba = E1000_PBA_10K;
1469 } else if (hw->mac.type == e1000_ich10lan) {
1470 pba = E1000_PBA_10K;
1471 } else if (hw->mac.type == e1000_pchlan) {
1472 pba = E1000_PBA_26K;
1473 } else if (hw->mac.type == e1000_pch2lan) {
1474 pba = E1000_PBA_26K;
1475 } else if (hw->mac.type == e1000_pch_lpt) {
1476 pba = E1000_PBA_26K;
1477 } else if (hw->mac.type == e1000_pch_spt) {
1478 pba = E1000_PBA_26K;
1479 } else {
1480 /*
1481 * Total FIFO is 40K
1482 */
1483 if (Adapter->max_frame_size > FRAME_SIZE_UPTO_8K)
1484 pba = E1000_PBA_22K; /* 22K for Rx, 18K for Tx */
1485 else
1486 pba = E1000_PBA_30K; /* 30K for Rx, 10K for Tx */
1487 }
1488 E1000_WRITE_REG(hw, E1000_PBA, pba);
1489
1490 /*
1491 * These parameters set thresholds for the adapter's generation(Tx)
1492 * and response(Rx) to Ethernet PAUSE frames. These are just threshold
1493 * settings. Flow control is enabled or disabled in the configuration
1494 * file.
1495 * High-water mark is set down from the top of the rx fifo (not
1496 * sensitive to max_frame_size) and low-water is set just below
1497 * high-water mark.
1498 * The high water mark must be low enough to fit one full frame above
1499 * it in the rx FIFO. Should be the lower of:
1500 * 90% of the Rx FIFO size and the full Rx FIFO size minus the early
1501 * receive size (assuming ERT set to E1000_ERT_2048), or the full
1502 * Rx FIFO size minus one full frame.
1503 */
1504 high_water = min(((pba << 10) * 9 / 10),
1505 ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574 ||
1506 hw->mac.type == e1000_ich9lan || hw->mac.type == e1000_ich10lan) ?
1507 ((pba << 10) - (E1000_ERT_2048 << 3)) :
1508 ((pba << 10) - Adapter->max_frame_size)));
1509
1510 hw->fc.high_water = high_water & 0xFFF8;
1511 hw->fc.low_water = hw->fc.high_water - 8;
1512
1513 if (hw->mac.type == e1000_80003es2lan)
1514 hw->fc.pause_time = 0xFFFF;
1515 else
1516 hw->fc.pause_time = E1000_FC_PAUSE_TIME;
1517 hw->fc.send_xon = B_TRUE;
1518
1519 /*
1520 * Reset the adapter hardware the second time.
1521 */
1522 mutex_enter(&e1000g_nvm_lock);
1523 result = e1000_reset_hw(hw);
1524 mutex_exit(&e1000g_nvm_lock);
1525
1526 if (result != E1000_SUCCESS) {
1527 e1000g_fm_ereport(Adapter, DDI_FM_DEVICE_INVAL_STATE);
1528 goto init_fail;
1529 }
1530
1531 /* disable wakeup control by default */
1532 if (hw->mac.type >= e1000_82544)
1533 E1000_WRITE_REG(hw, E1000_WUC, 0);
1534
1535 /*
1536 * MWI should be disabled on 82546.
1537 */
1538 if (hw->mac.type == e1000_82546)
1539 e1000_pci_clear_mwi(hw);
1540 else
1541 e1000_pci_set_mwi(hw);
1542
1543 /*
1544 * Configure/Initialize hardware
1545 */
1546 mutex_enter(&e1000g_nvm_lock);
1547 result = e1000_init_hw(hw);
1548 mutex_exit(&e1000g_nvm_lock);
1549
1550 if (result < E1000_SUCCESS) {
1551 e1000g_log(Adapter, CE_WARN, "Initialize hw failed");
1552 e1000g_fm_ereport(Adapter, DDI_FM_DEVICE_INVAL_STATE);
1553 goto init_fail;
1554 }
1555
1556 /*
1557 * Restore LED settings to the default from EEPROM
1558 * to meet the standard for Sun platforms.
1559 */
1560 (void) e1000_cleanup_led(hw);
1561
1562 /* Disable Smart Power Down */
1563 phy_spd_state(hw, B_FALSE);
1564
1565 /* Make sure driver has control */
1566 e1000g_get_driver_control(hw);
1567
1568 /*
1569 * Initialize unicast addresses.
1570 */
1571 e1000g_init_unicst(Adapter);
1572
1573 /*
1574 * Setup and initialize the mctable structures. After this routine
1575 * completes Multicast table will be set
1576 */
1577 e1000_update_mc_addr_list(hw,
1578 (uint8_t *)Adapter->mcast_table, Adapter->mcast_count);
1579 msec_delay(5);
1580
1581 /*
1582 * Implement Adaptive IFS
1583 */
1584 e1000_reset_adaptive(hw);
1585
1586 /* Setup Interrupt Throttling Register */
1587 if (hw->mac.type >= e1000_82540) {
1588 E1000_WRITE_REG(hw, E1000_ITR, Adapter->intr_throttling_rate);
1589 } else
1590 Adapter->intr_adaptive = B_FALSE;
1591
1592 /* Start the timer for link setup */
1593 if (hw->mac.autoneg)
1594 link_timeout = PHY_AUTO_NEG_LIMIT * drv_usectohz(100000);
1595 else
1596 link_timeout = PHY_FORCE_LIMIT * drv_usectohz(100000);
1597
1598 mutex_enter(&Adapter->link_lock);
1599 if (hw->phy.autoneg_wait_to_complete) {
1600 Adapter->link_complete = B_TRUE;
1601 } else {
1602 Adapter->link_complete = B_FALSE;
1603 Adapter->link_tid = timeout(e1000g_link_timer,
1604 (void *)Adapter, link_timeout);
1605 }
1606 mutex_exit(&Adapter->link_lock);
1607
1608 /* Save the state of the phy */
1609 e1000g_get_phy_state(Adapter);
1610
1611 e1000g_param_sync(Adapter);
1612
1613 Adapter->init_count++;
1614
1615 if (e1000g_check_acc_handle(Adapter->osdep.cfg_handle) != DDI_FM_OK) {
1616 goto init_fail;
1617 }
1618 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK) {
1619 goto init_fail;
1620 }
1621
1622 Adapter->poll_mode = e1000g_poll_mode;
1623
1624 return (DDI_SUCCESS);
1625
1626 init_fail:
1627 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_LOST);
1628 return (DDI_FAILURE);
1629 }
1630
1631 static int
1632 e1000g_alloc_rx_data(struct e1000g *Adapter)
1633 {
1634 e1000g_rx_ring_t *rx_ring;
1635 e1000g_rx_data_t *rx_data;
1636
1637 rx_ring = Adapter->rx_ring;
1638
1639 rx_data = kmem_zalloc(sizeof (e1000g_rx_data_t), KM_NOSLEEP);
1640
1641 if (rx_data == NULL)
1642 return (DDI_FAILURE);
1643
1644 rx_data->priv_devi_node = Adapter->priv_devi_node;
1645 rx_data->rx_ring = rx_ring;
1646
1647 mutex_init(&rx_data->freelist_lock, NULL,
1648 MUTEX_DRIVER, DDI_INTR_PRI(Adapter->intr_pri));
1649 mutex_init(&rx_data->recycle_lock, NULL,
1650 MUTEX_DRIVER, DDI_INTR_PRI(Adapter->intr_pri));
1651
1652 rx_ring->rx_data = rx_data;
1653
1654 return (DDI_SUCCESS);
1655 }
1656
1657 void
1658 e1000g_free_rx_pending_buffers(e1000g_rx_data_t *rx_data)
1659 {
1660 rx_sw_packet_t *packet, *next_packet;
1661
1662 if (rx_data == NULL)
1663 return;
1664
1665 packet = rx_data->packet_area;
1666 while (packet != NULL) {
1667 next_packet = packet->next;
1668 e1000g_free_rx_sw_packet(packet, B_TRUE);
1669 packet = next_packet;
1670 }
1671 rx_data->packet_area = NULL;
1672 }
1673
1674 void
1675 e1000g_free_rx_data(e1000g_rx_data_t *rx_data)
1676 {
1677 if (rx_data == NULL)
1678 return;
1679
1680 mutex_destroy(&rx_data->freelist_lock);
1681 mutex_destroy(&rx_data->recycle_lock);
1682
1683 kmem_free(rx_data, sizeof (e1000g_rx_data_t));
1684 }
1685
1686 /*
1687 * Check if the link is up
1688 */
1689 static boolean_t
1690 e1000g_link_up(struct e1000g *Adapter)
1691 {
1692 struct e1000_hw *hw = &Adapter->shared;
1693 boolean_t link_up = B_FALSE;
1694
1695 /*
1696 * get_link_status is set in the interrupt handler on link-status-change
1697 * or rx sequence error interrupt. get_link_status will stay
1698 * false until the e1000_check_for_link establishes link only
1699 * for copper adapters.
1700 */
1701 switch (hw->phy.media_type) {
1702 case e1000_media_type_copper:
1703 if (hw->mac.get_link_status) {
1704 /*
1705 * SPT devices need a bit of extra time before we ask
1706 * them.
1707 */
1708 if (hw->mac.type == e1000_pch_spt)
1709 msec_delay(50);
1710 (void) e1000_check_for_link(hw);
1711 if ((E1000_READ_REG(hw, E1000_STATUS) &
1712 E1000_STATUS_LU)) {
1713 link_up = B_TRUE;
1714 } else {
1715 link_up = !hw->mac.get_link_status;
1716 }
1717 } else {
1718 link_up = B_TRUE;
1719 }
1720 break;
1721 case e1000_media_type_fiber:
1722 (void) e1000_check_for_link(hw);
1723 link_up = (E1000_READ_REG(hw, E1000_STATUS) &
1724 E1000_STATUS_LU);
1725 break;
1726 case e1000_media_type_internal_serdes:
1727 (void) e1000_check_for_link(hw);
1728 link_up = hw->mac.serdes_has_link;
1729 break;
1730 }
1731
1732 return (link_up);
1733 }
1734
1735 static void
1736 e1000g_m_ioctl(void *arg, queue_t *q, mblk_t *mp)
1737 {
1738 struct iocblk *iocp;
1739 struct e1000g *e1000gp;
1740 enum ioc_reply status;
1741
1742 iocp = (struct iocblk *)(uintptr_t)mp->b_rptr;
1743 iocp->ioc_error = 0;
1744 e1000gp = (struct e1000g *)arg;
1745
1746 ASSERT(e1000gp);
1747 if (e1000gp == NULL) {
1748 miocnak(q, mp, 0, EINVAL);
1749 return;
1750 }
1751
1752 rw_enter(&e1000gp->chip_lock, RW_READER);
1753 if (e1000gp->e1000g_state & E1000G_SUSPENDED) {
1754 rw_exit(&e1000gp->chip_lock);
1755 miocnak(q, mp, 0, EINVAL);
1756 return;
1757 }
1758 rw_exit(&e1000gp->chip_lock);
1759
1760 switch (iocp->ioc_cmd) {
1761
1762 case LB_GET_INFO_SIZE:
1763 case LB_GET_INFO:
1764 case LB_GET_MODE:
1765 case LB_SET_MODE:
1766 status = e1000g_loopback_ioctl(e1000gp, iocp, mp);
1767 break;
1768
1769
1770 #ifdef E1000G_DEBUG
1771 case E1000G_IOC_REG_PEEK:
1772 case E1000G_IOC_REG_POKE:
1773 status = e1000g_pp_ioctl(e1000gp, iocp, mp);
1774 break;
1775 case E1000G_IOC_CHIP_RESET:
1776 e1000gp->reset_count++;
1777 if (e1000g_reset_adapter(e1000gp))
1778 status = IOC_ACK;
1779 else
1780 status = IOC_INVAL;
1781 break;
1782 #endif
1783 default:
1784 status = IOC_INVAL;
1785 break;
1786 }
1787
1788 /*
1789 * Decide how to reply
1790 */
1791 switch (status) {
1792 default:
1793 case IOC_INVAL:
1794 /*
1795 * Error, reply with a NAK and EINVAL or the specified error
1796 */
1797 miocnak(q, mp, 0, iocp->ioc_error == 0 ?
1798 EINVAL : iocp->ioc_error);
1799 break;
1800
1801 case IOC_DONE:
1802 /*
1803 * OK, reply already sent
1804 */
1805 break;
1806
1807 case IOC_ACK:
1808 /*
1809 * OK, reply with an ACK
1810 */
1811 miocack(q, mp, 0, 0);
1812 break;
1813
1814 case IOC_REPLY:
1815 /*
1816 * OK, send prepared reply as ACK or NAK
1817 */
1818 mp->b_datap->db_type = iocp->ioc_error == 0 ?
1819 M_IOCACK : M_IOCNAK;
1820 qreply(q, mp);
1821 break;
1822 }
1823 }
1824
1825 /*
1826 * The default value of e1000g_poll_mode == 0 assumes that the NIC is
1827 * capable of supporting only one interrupt and we shouldn't disable
1828 * the physical interrupt. In this case we let the interrupt come and
1829 * we queue the packets in the rx ring itself in case we are in polling
1830 * mode (better latency but slightly lower performance and a very
1831 * high intrrupt count in mpstat which is harmless).
1832 *
1833 * e1000g_poll_mode == 1 assumes that we have per Rx ring interrupt
1834 * which can be disabled in poll mode. This gives better overall
1835 * throughput (compared to the mode above), shows very low interrupt
1836 * count but has slightly higher latency since we pick the packets when
1837 * the poll thread does polling.
1838 *
1839 * Currently, this flag should be enabled only while doing performance
1840 * measurement or when it can be guaranteed that entire NIC going
1841 * in poll mode will not harm any traffic like cluster heartbeat etc.
1842 */
1843 int e1000g_poll_mode = 0;
1844
1845 /*
1846 * Called from the upper layers when driver is in polling mode to
1847 * pick up any queued packets. Care should be taken to not block
1848 * this thread.
1849 */
1850 static mblk_t *e1000g_poll_ring(void *arg, int bytes_to_pickup)
1851 {
1852 e1000g_rx_ring_t *rx_ring = (e1000g_rx_ring_t *)arg;
1853 mblk_t *mp = NULL;
1854 mblk_t *tail;
1855 struct e1000g *adapter;
1856
1857 adapter = rx_ring->adapter;
1858
1859 rw_enter(&adapter->chip_lock, RW_READER);
1860
1861 if (adapter->e1000g_state & E1000G_SUSPENDED) {
1862 rw_exit(&adapter->chip_lock);
1863 return (NULL);
1864 }
1865
1866 mutex_enter(&rx_ring->rx_lock);
1867 mp = e1000g_receive(rx_ring, &tail, bytes_to_pickup);
1868 mutex_exit(&rx_ring->rx_lock);
1869 rw_exit(&adapter->chip_lock);
1870 return (mp);
1871 }
1872
1873 static int
1874 e1000g_m_start(void *arg)
1875 {
1876 struct e1000g *Adapter = (struct e1000g *)arg;
1877
1878 rw_enter(&Adapter->chip_lock, RW_WRITER);
1879
1880 if (Adapter->e1000g_state & E1000G_SUSPENDED) {
1881 rw_exit(&Adapter->chip_lock);
1882 return (ECANCELED);
1883 }
1884
1885 if (e1000g_start(Adapter, B_TRUE) != DDI_SUCCESS) {
1886 rw_exit(&Adapter->chip_lock);
1887 return (ENOTACTIVE);
1888 }
1889
1890 Adapter->e1000g_state |= E1000G_STARTED;
1891
1892 rw_exit(&Adapter->chip_lock);
1893
1894 /* Enable and start the watchdog timer */
1895 enable_watchdog_timer(Adapter);
1896
1897 return (0);
1898 }
1899
1900 static int
1901 e1000g_start(struct e1000g *Adapter, boolean_t global)
1902 {
1903 e1000g_rx_data_t *rx_data;
1904
1905 if (global) {
1906 if (e1000g_alloc_rx_data(Adapter) != DDI_SUCCESS) {
1907 e1000g_log(Adapter, CE_WARN, "Allocate rx data failed");
1908 goto start_fail;
1909 }
1910
1911 /* Allocate dma resources for descriptors and buffers */
1912 if (e1000g_alloc_dma_resources(Adapter) != DDI_SUCCESS) {
1913 e1000g_log(Adapter, CE_WARN,
1914 "Alloc DMA resources failed");
1915 goto start_fail;
1916 }
1917 Adapter->rx_buffer_setup = B_FALSE;
1918 }
1919
1920 if (!(Adapter->attach_progress & ATTACH_PROGRESS_INIT)) {
1921 if (e1000g_init(Adapter) != DDI_SUCCESS) {
1922 e1000g_log(Adapter, CE_WARN,
1923 "Adapter initialization failed");
1924 goto start_fail;
1925 }
1926 }
1927
1928 /* Setup and initialize the transmit structures */
1929 e1000g_tx_setup(Adapter);
1930 msec_delay(5);
1931
1932 /* Setup and initialize the receive structures */
1933 e1000g_rx_setup(Adapter);
1934 msec_delay(5);
1935
1936 /* Restore the e1000g promiscuous mode */
1937 e1000g_restore_promisc(Adapter);
1938
1939 e1000g_mask_interrupt(Adapter);
1940
1941 Adapter->attach_progress |= ATTACH_PROGRESS_INIT;
1942
1943 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK) {
1944 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_LOST);
1945 goto start_fail;
1946 }
1947
1948 return (DDI_SUCCESS);
1949
1950 start_fail:
1951 rx_data = Adapter->rx_ring->rx_data;
1952
1953 if (global) {
1954 e1000g_release_dma_resources(Adapter);
1955 e1000g_free_rx_pending_buffers(rx_data);
1956 e1000g_free_rx_data(rx_data);
1957 }
1958
1959 mutex_enter(&e1000g_nvm_lock);
1960 (void) e1000_reset_hw(&Adapter->shared);
1961 mutex_exit(&e1000g_nvm_lock);
1962
1963 return (DDI_FAILURE);
1964 }
1965
1966 /*
1967 * The I219 has the curious property that if the descriptor rings are not
1968 * emptied before resetting the hardware or before changing the device state
1969 * based on runtime power management, it'll cause the card to hang. This can
1970 * then only be fixed by a PCI reset. As such, for the I219 and it alone, we
1971 * have to flush the rings if we're in this state.
1972 */
1973 static void
1974 e1000g_flush_desc_rings(struct e1000g *Adapter)
1975 {
1976 struct e1000_hw *hw = &Adapter->shared;
1977 u16 hang_state;
1978 u32 fext_nvm11, tdlen;
1979
1980 /* First, disable MULR fix in FEXTNVM11 */
1981 fext_nvm11 = E1000_READ_REG(hw, E1000_FEXTNVM11);
1982 fext_nvm11 |= E1000_FEXTNVM11_DISABLE_MULR_FIX;
1983 E1000_WRITE_REG(hw, E1000_FEXTNVM11, fext_nvm11);
1984
1985 /* do nothing if we're not in faulty state, or if the queue is empty */
1986 tdlen = E1000_READ_REG(hw, E1000_TDLEN(0));
1987 hang_state = pci_config_get16(Adapter->osdep.cfg_handle,
1988 PCICFG_DESC_RING_STATUS);
1989 if (!(hang_state & FLUSH_DESC_REQUIRED) || !tdlen)
1990 return;
1991 e1000g_flush_tx_ring(Adapter);
1992
1993 /* recheck, maybe the fault is caused by the rx ring */
1994 hang_state = pci_config_get16(Adapter->osdep.cfg_handle,
1995 PCICFG_DESC_RING_STATUS);
1996 if (hang_state & FLUSH_DESC_REQUIRED)
1997 e1000g_flush_rx_ring(Adapter);
1998
1999 }
2000
2001 static void
2002 e1000g_m_stop(void *arg)
2003 {
2004 struct e1000g *Adapter = (struct e1000g *)arg;
2005
2006 /* Drain tx sessions */
2007 (void) e1000g_tx_drain(Adapter);
2008
2009 rw_enter(&Adapter->chip_lock, RW_WRITER);
2010
2011 if (Adapter->e1000g_state & E1000G_SUSPENDED) {
2012 rw_exit(&Adapter->chip_lock);
2013 return;
2014 }
2015 Adapter->e1000g_state &= ~E1000G_STARTED;
2016 e1000g_stop(Adapter, B_TRUE);
2017
2018 rw_exit(&Adapter->chip_lock);
2019
2020 /* Disable and stop all the timers */
2021 disable_watchdog_timer(Adapter);
2022 stop_link_timer(Adapter);
2023 stop_82547_timer(Adapter->tx_ring);
2024 }
2025
2026 static void
2027 e1000g_stop(struct e1000g *Adapter, boolean_t global)
2028 {
2029 private_devi_list_t *devi_node;
2030 e1000g_rx_data_t *rx_data;
2031 int result;
2032
2033 Adapter->attach_progress &= ~ATTACH_PROGRESS_INIT;
2034
2035 /* Stop the chip and release pending resources */
2036
2037 /* Tell firmware driver is no longer in control */
2038 e1000g_release_driver_control(&Adapter->shared);
2039
2040 e1000g_clear_all_interrupts(Adapter);
2041
2042 mutex_enter(&e1000g_nvm_lock);
2043 result = e1000_reset_hw(&Adapter->shared);
2044 mutex_exit(&e1000g_nvm_lock);
2045
2046 if (result != E1000_SUCCESS) {
2047 e1000g_fm_ereport(Adapter, DDI_FM_DEVICE_INVAL_STATE);
2048 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_LOST);
2049 }
2050
2051 mutex_enter(&Adapter->link_lock);
2052 Adapter->link_complete = B_FALSE;
2053 mutex_exit(&Adapter->link_lock);
2054
2055 /* Release resources still held by the TX descriptors */
2056 e1000g_tx_clean(Adapter);
2057
2058 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK)
2059 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_LOST);
2060
2061 /* Clean the pending rx jumbo packet fragment */
2062 e1000g_rx_clean(Adapter);
2063
2064 /*
2065 * The I219, eg. the pch_spt, has bugs such that we must ensure that
2066 * rings are flushed before we do anything else. This must be done
2067 * before we release DMA resources.
2068 */
2069 if (Adapter->shared.mac.type == e1000_pch_spt)
2070 e1000g_flush_desc_rings(Adapter);
2071
2072 if (global) {
2073 e1000g_release_dma_resources(Adapter);
2074
2075 mutex_enter(&e1000g_rx_detach_lock);
2076 rx_data = Adapter->rx_ring->rx_data;
2077 rx_data->flag |= E1000G_RX_STOPPED;
2078
2079 if (rx_data->pending_count == 0) {
2080 e1000g_free_rx_pending_buffers(rx_data);
2081 e1000g_free_rx_data(rx_data);
2082 } else {
2083 devi_node = rx_data->priv_devi_node;
2084 if (devi_node != NULL)
2085 atomic_inc_32(&devi_node->pending_rx_count);
2086 else
2087 atomic_inc_32(&Adapter->pending_rx_count);
2088 }
2089 mutex_exit(&e1000g_rx_detach_lock);
2090 }
2091
2092 if (Adapter->link_state != LINK_STATE_UNKNOWN) {
2093 Adapter->link_state = LINK_STATE_UNKNOWN;
2094 if (!Adapter->reset_flag)
2095 mac_link_update(Adapter->mh, Adapter->link_state);
2096 }
2097 }
2098
2099 static void
2100 e1000g_rx_clean(struct e1000g *Adapter)
2101 {
2102 e1000g_rx_data_t *rx_data = Adapter->rx_ring->rx_data;
2103
2104 if (rx_data == NULL)
2105 return;
2106
2107 if (rx_data->rx_mblk != NULL) {
2108 freemsg(rx_data->rx_mblk);
2109 rx_data->rx_mblk = NULL;
2110 rx_data->rx_mblk_tail = NULL;
2111 rx_data->rx_mblk_len = 0;
2112 }
2113 }
2114
2115 static void
2116 e1000g_tx_clean(struct e1000g *Adapter)
2117 {
2118 e1000g_tx_ring_t *tx_ring;
2119 p_tx_sw_packet_t packet;
2120 mblk_t *mp;
2121 mblk_t *nmp;
2122 uint32_t packet_count;
2123
2124 tx_ring = Adapter->tx_ring;
2125
2126 /*
2127 * Here we don't need to protect the lists using
2128 * the usedlist_lock and freelist_lock, for they
2129 * have been protected by the chip_lock.
2130 */
2131 mp = NULL;
2132 nmp = NULL;
2133 packet_count = 0;
2134 packet = (p_tx_sw_packet_t)QUEUE_GET_HEAD(&tx_ring->used_list);
2135 while (packet != NULL) {
2136 if (packet->mp != NULL) {
2137 /* Assemble the message chain */
2138 if (mp == NULL) {
2139 mp = packet->mp;
2140 nmp = packet->mp;
2141 } else {
2142 nmp->b_next = packet->mp;
2143 nmp = packet->mp;
2144 }
2145 /* Disconnect the message from the sw packet */
2146 packet->mp = NULL;
2147 }
2148
2149 e1000g_free_tx_swpkt(packet);
2150 packet_count++;
2151
2152 packet = (p_tx_sw_packet_t)
2153 QUEUE_GET_NEXT(&tx_ring->used_list, &packet->Link);
2154 }
2155
2156 if (mp != NULL)
2157 freemsgchain(mp);
2158
2159 if (packet_count > 0) {
2160 QUEUE_APPEND(&tx_ring->free_list, &tx_ring->used_list);
2161 QUEUE_INIT_LIST(&tx_ring->used_list);
2162
2163 /* Setup TX descriptor pointers */
2164 tx_ring->tbd_next = tx_ring->tbd_first;
2165 tx_ring->tbd_oldest = tx_ring->tbd_first;
2166
2167 /* Setup our HW Tx Head & Tail descriptor pointers */
2168 E1000_WRITE_REG(&Adapter->shared, E1000_TDH(0), 0);
2169 E1000_WRITE_REG(&Adapter->shared, E1000_TDT(0), 0);
2170 }
2171 }
2172
2173 static boolean_t
2174 e1000g_tx_drain(struct e1000g *Adapter)
2175 {
2176 int i;
2177 boolean_t done;
2178 e1000g_tx_ring_t *tx_ring;
2179
2180 tx_ring = Adapter->tx_ring;
2181
2182 /* Allow up to 'wsdraintime' for pending xmit's to complete. */
2183 for (i = 0; i < TX_DRAIN_TIME; i++) {
2184 mutex_enter(&tx_ring->usedlist_lock);
2185 done = IS_QUEUE_EMPTY(&tx_ring->used_list);
2186 mutex_exit(&tx_ring->usedlist_lock);
2187
2188 if (done)
2189 break;
2190
2191 msec_delay(1);
2192 }
2193
2194 return (done);
2195 }
2196
2197 static boolean_t
2198 e1000g_rx_drain(struct e1000g *Adapter)
2199 {
2200 int i;
2201 boolean_t done;
2202
2203 /*
2204 * Allow up to RX_DRAIN_TIME for pending received packets to complete.
2205 */
2206 for (i = 0; i < RX_DRAIN_TIME; i++) {
2207 done = (Adapter->pending_rx_count == 0);
2208
2209 if (done)
2210 break;
2211
2212 msec_delay(1);
2213 }
2214
2215 return (done);
2216 }
2217
2218 static boolean_t
2219 e1000g_reset_adapter(struct e1000g *Adapter)
2220 {
2221 /* Disable and stop all the timers */
2222 disable_watchdog_timer(Adapter);
2223 stop_link_timer(Adapter);
2224 stop_82547_timer(Adapter->tx_ring);
2225
2226 rw_enter(&Adapter->chip_lock, RW_WRITER);
2227
2228 if (Adapter->stall_flag) {
2229 Adapter->stall_flag = B_FALSE;
2230 Adapter->reset_flag = B_TRUE;
2231 }
2232
2233 if (!(Adapter->e1000g_state & E1000G_STARTED)) {
2234 rw_exit(&Adapter->chip_lock);
2235 return (B_TRUE);
2236 }
2237
2238 e1000g_stop(Adapter, B_FALSE);
2239
2240 if (e1000g_start(Adapter, B_FALSE) != DDI_SUCCESS) {
2241 rw_exit(&Adapter->chip_lock);
2242 e1000g_log(Adapter, CE_WARN, "Reset failed");
2243 return (B_FALSE);
2244 }
2245
2246 rw_exit(&Adapter->chip_lock);
2247
2248 /* Enable and start the watchdog timer */
2249 enable_watchdog_timer(Adapter);
2250
2251 return (B_TRUE);
2252 }
2253
2254 boolean_t
2255 e1000g_global_reset(struct e1000g *Adapter)
2256 {
2257 /* Disable and stop all the timers */
2258 disable_watchdog_timer(Adapter);
2259 stop_link_timer(Adapter);
2260 stop_82547_timer(Adapter->tx_ring);
2261
2262 rw_enter(&Adapter->chip_lock, RW_WRITER);
2263
2264 e1000g_stop(Adapter, B_TRUE);
2265
2266 Adapter->init_count = 0;
2267
2268 if (e1000g_start(Adapter, B_TRUE) != DDI_SUCCESS) {
2269 rw_exit(&Adapter->chip_lock);
2270 e1000g_log(Adapter, CE_WARN, "Reset failed");
2271 return (B_FALSE);
2272 }
2273
2274 rw_exit(&Adapter->chip_lock);
2275
2276 /* Enable and start the watchdog timer */
2277 enable_watchdog_timer(Adapter);
2278
2279 return (B_TRUE);
2280 }
2281
2282 /*
2283 * e1000g_intr_pciexpress - ISR for PCI Express chipsets
2284 *
2285 * This interrupt service routine is for PCI-Express adapters.
2286 * The ICR contents is valid only when the E1000_ICR_INT_ASSERTED
2287 * bit is set.
2288 */
2289 static uint_t
2290 e1000g_intr_pciexpress(caddr_t arg)
2291 {
2292 struct e1000g *Adapter;
2293 uint32_t icr;
2294
2295 Adapter = (struct e1000g *)(uintptr_t)arg;
2296 icr = E1000_READ_REG(&Adapter->shared, E1000_ICR);
2297
2298 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK) {
2299 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_DEGRADED);
2300 return (DDI_INTR_CLAIMED);
2301 }
2302
2303 if (icr & E1000_ICR_INT_ASSERTED) {
2304 /*
2305 * E1000_ICR_INT_ASSERTED bit was set:
2306 * Read(Clear) the ICR, claim this interrupt,
2307 * look for work to do.
2308 */
2309 e1000g_intr_work(Adapter, icr);
2310 return (DDI_INTR_CLAIMED);
2311 } else {
2312 /*
2313 * E1000_ICR_INT_ASSERTED bit was not set:
2314 * Don't claim this interrupt, return immediately.
2315 */
2316 return (DDI_INTR_UNCLAIMED);
2317 }
2318 }
2319
2320 /*
2321 * e1000g_intr - ISR for PCI/PCI-X chipsets
2322 *
2323 * This interrupt service routine is for PCI/PCI-X adapters.
2324 * We check the ICR contents no matter the E1000_ICR_INT_ASSERTED
2325 * bit is set or not.
2326 */
2327 static uint_t
2328 e1000g_intr(caddr_t arg)
2329 {
2330 struct e1000g *Adapter;
2331 uint32_t icr;
2332
2333 Adapter = (struct e1000g *)(uintptr_t)arg;
2334 icr = E1000_READ_REG(&Adapter->shared, E1000_ICR);
2335
2336 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK) {
2337 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_DEGRADED);
2338 return (DDI_INTR_CLAIMED);
2339 }
2340
2341 if (icr) {
2342 /*
2343 * Any bit was set in ICR:
2344 * Read(Clear) the ICR, claim this interrupt,
2345 * look for work to do.
2346 */
2347 e1000g_intr_work(Adapter, icr);
2348 return (DDI_INTR_CLAIMED);
2349 } else {
2350 /*
2351 * No bit was set in ICR:
2352 * Don't claim this interrupt, return immediately.
2353 */
2354 return (DDI_INTR_UNCLAIMED);
2355 }
2356 }
2357
2358 /*
2359 * e1000g_intr_work - actual processing of ISR
2360 *
2361 * Read(clear) the ICR contents and call appropriate interrupt
2362 * processing routines.
2363 */
2364 static void
2365 e1000g_intr_work(struct e1000g *Adapter, uint32_t icr)
2366 {
2367 struct e1000_hw *hw;
2368 hw = &Adapter->shared;
2369 e1000g_tx_ring_t *tx_ring = Adapter->tx_ring;
2370
2371 Adapter->rx_pkt_cnt = 0;
2372 Adapter->tx_pkt_cnt = 0;
2373
2374 rw_enter(&Adapter->chip_lock, RW_READER);
2375
2376 if (Adapter->e1000g_state & E1000G_SUSPENDED) {
2377 rw_exit(&Adapter->chip_lock);
2378 return;
2379 }
2380 /*
2381 * Here we need to check the "e1000g_state" flag within the chip_lock to
2382 * ensure the receive routine will not execute when the adapter is
2383 * being reset.
2384 */
2385 if (!(Adapter->e1000g_state & E1000G_STARTED)) {
2386 rw_exit(&Adapter->chip_lock);
2387 return;
2388 }
2389
2390 if (icr & E1000_ICR_RXT0) {
2391 mblk_t *mp = NULL;
2392 mblk_t *tail = NULL;
2393 e1000g_rx_ring_t *rx_ring;
2394
2395 rx_ring = Adapter->rx_ring;
2396 mutex_enter(&rx_ring->rx_lock);
2397 /*
2398 * Sometimes with legacy interrupts, it possible that
2399 * there is a single interrupt for Rx/Tx. In which
2400 * case, if poll flag is set, we shouldn't really
2401 * be doing Rx processing.
2402 */
2403 if (!rx_ring->poll_flag)
2404 mp = e1000g_receive(rx_ring, &tail,
2405 E1000G_CHAIN_NO_LIMIT);
2406 mutex_exit(&rx_ring->rx_lock);
2407 rw_exit(&Adapter->chip_lock);
2408 if (mp != NULL)
2409 mac_rx_ring(Adapter->mh, rx_ring->mrh,
2410 mp, rx_ring->ring_gen_num);
2411 } else
2412 rw_exit(&Adapter->chip_lock);
2413
2414 if (icr & E1000_ICR_TXDW) {
2415 if (!Adapter->tx_intr_enable)
2416 e1000g_clear_tx_interrupt(Adapter);
2417
2418 /* Recycle the tx descriptors */
2419 rw_enter(&Adapter->chip_lock, RW_READER);
2420 (void) e1000g_recycle(tx_ring);
2421 E1000G_DEBUG_STAT(tx_ring->stat_recycle_intr);
2422 rw_exit(&Adapter->chip_lock);
2423
2424 if (tx_ring->resched_needed &&
2425 (tx_ring->tbd_avail > DEFAULT_TX_UPDATE_THRESHOLD)) {
2426 tx_ring->resched_needed = B_FALSE;
2427 mac_tx_update(Adapter->mh);
2428 E1000G_STAT(tx_ring->stat_reschedule);
2429 }
2430 }
2431
2432 /*
2433 * The Receive Sequence errors RXSEQ and the link status change LSC
2434 * are checked to detect that the cable has been pulled out. For
2435 * the Wiseman 2.0 silicon, the receive sequence errors interrupt
2436 * are an indication that cable is not connected.
2437 */
2438 if ((icr & E1000_ICR_RXSEQ) ||
2439 (icr & E1000_ICR_LSC) ||
2440 (icr & E1000_ICR_GPI_EN1)) {
2441 boolean_t link_changed;
2442 timeout_id_t tid = 0;
2443
2444 stop_watchdog_timer(Adapter);
2445
2446 rw_enter(&Adapter->chip_lock, RW_WRITER);
2447
2448 /*
2449 * Because we got a link-status-change interrupt, force
2450 * e1000_check_for_link() to look at phy
2451 */
2452 Adapter->shared.mac.get_link_status = B_TRUE;
2453
2454 /* e1000g_link_check takes care of link status change */
2455 link_changed = e1000g_link_check(Adapter);
2456
2457 /* Get new phy state */
2458 e1000g_get_phy_state(Adapter);
2459
2460 /*
2461 * If the link timer has not timed out, we'll not notify
2462 * the upper layer with any link state until the link is up.
2463 */
2464 if (link_changed && !Adapter->link_complete) {
2465 if (Adapter->link_state == LINK_STATE_UP) {
2466 mutex_enter(&Adapter->link_lock);
2467 Adapter->link_complete = B_TRUE;
2468 tid = Adapter->link_tid;
2469 Adapter->link_tid = 0;
2470 mutex_exit(&Adapter->link_lock);
2471 } else {
2472 link_changed = B_FALSE;
2473 }
2474 }
2475 rw_exit(&Adapter->chip_lock);
2476
2477 if (link_changed) {
2478 if (tid != 0)
2479 (void) untimeout(tid);
2480
2481 /*
2482 * Workaround for esb2. Data stuck in fifo on a link
2483 * down event. Stop receiver here and reset in watchdog.
2484 */
2485 if ((Adapter->link_state == LINK_STATE_DOWN) &&
2486 (Adapter->shared.mac.type == e1000_80003es2lan)) {
2487 uint32_t rctl = E1000_READ_REG(hw, E1000_RCTL);
2488 E1000_WRITE_REG(hw, E1000_RCTL,
2489 rctl & ~E1000_RCTL_EN);
2490 e1000g_log(Adapter, CE_WARN,
2491 "ESB2 receiver disabled");
2492 Adapter->esb2_workaround = B_TRUE;
2493 }
2494 if (!Adapter->reset_flag)
2495 mac_link_update(Adapter->mh,
2496 Adapter->link_state);
2497 if (Adapter->link_state == LINK_STATE_UP)
2498 Adapter->reset_flag = B_FALSE;
2499 }
2500
2501 start_watchdog_timer(Adapter);
2502 }
2503 }
2504
2505 static void
2506 e1000g_init_unicst(struct e1000g *Adapter)
2507 {
2508 struct e1000_hw *hw;
2509 int slot;
2510
2511 hw = &Adapter->shared;
2512
2513 if (Adapter->init_count == 0) {
2514 /* Initialize the multiple unicast addresses */
2515 Adapter->unicst_total = min(hw->mac.rar_entry_count,
2516 MAX_NUM_UNICAST_ADDRESSES);
2517
2518 /*
2519 * The common code does not correctly calculate the number of
2520 * rar's that could be reserved by firmware for the pch_lpt and
2521 * pch_spt macs. The interface has one primary rar, and 11
2522 * additional ones. Those 11 additional ones are not always
2523 * available. According to the datasheet, we need to check a
2524 * few of the bits set in the FWSM register. If the value is
2525 * zero, everything is available. If the value is 1, none of the
2526 * additional registers are available. If the value is 2-7, only
2527 * that number are available.
2528 */
2529 if (hw->mac.type == e1000_pch_lpt ||
2530 hw->mac.type == e1000_pch_spt) {
2531 uint32_t locked, rar;
2532
2533 locked = E1000_READ_REG(hw, E1000_FWSM) &
2534 E1000_FWSM_WLOCK_MAC_MASK;
2535 locked >>= E1000_FWSM_WLOCK_MAC_SHIFT;
2536 rar = 1;
2537 if (locked == 0)
2538 rar += 11;
2539 else if (locked == 1)
2540 rar += 0;
2541 else
2542 rar += locked;
2543 Adapter->unicst_total = min(rar,
2544 MAX_NUM_UNICAST_ADDRESSES);
2545 }
2546
2547 /* Workaround for an erratum of 82571 chipst */
2548 if ((hw->mac.type == e1000_82571) &&
2549 (e1000_get_laa_state_82571(hw) == B_TRUE))
2550 Adapter->unicst_total--;
2551
2552 /* VMware doesn't support multiple mac addresses properly */
2553 if (hw->subsystem_vendor_id == 0x15ad)
2554 Adapter->unicst_total = 1;
2555
2556 Adapter->unicst_avail = Adapter->unicst_total;
2557
2558 for (slot = 0; slot < Adapter->unicst_total; slot++) {
2559 /* Clear both the flag and MAC address */
2560 Adapter->unicst_addr[slot].reg.high = 0;
2561 Adapter->unicst_addr[slot].reg.low = 0;
2562 }
2563 } else {
2564 /* Workaround for an erratum of 82571 chipst */
2565 if ((hw->mac.type == e1000_82571) &&
2566 (e1000_get_laa_state_82571(hw) == B_TRUE))
2567 (void) e1000_rar_set(hw, hw->mac.addr, LAST_RAR_ENTRY);
2568
2569 /* Re-configure the RAR registers */
2570 for (slot = 0; slot < Adapter->unicst_total; slot++)
2571 if (Adapter->unicst_addr[slot].mac.set == 1)
2572 (void) e1000_rar_set(hw,
2573 Adapter->unicst_addr[slot].mac.addr, slot);
2574 }
2575
2576 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK)
2577 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_DEGRADED);
2578 }
2579
2580 static int
2581 e1000g_unicst_set(struct e1000g *Adapter, const uint8_t *mac_addr,
2582 int slot)
2583 {
2584 struct e1000_hw *hw;
2585
2586 hw = &Adapter->shared;
2587
2588 /*
2589 * The first revision of Wiseman silicon (rev 2.0) has an errata
2590 * that requires the receiver to be in reset when any of the
2591 * receive address registers (RAR regs) are accessed. The first
2592 * rev of Wiseman silicon also requires MWI to be disabled when
2593 * a global reset or a receive reset is issued. So before we
2594 * initialize the RARs, we check the rev of the Wiseman controller
2595 * and work around any necessary HW errata.
2596 */
2597 if ((hw->mac.type == e1000_82542) &&
2598 (hw->revision_id == E1000_REVISION_2)) {
2599 e1000_pci_clear_mwi(hw);
2600 E1000_WRITE_REG(hw, E1000_RCTL, E1000_RCTL_RST);
2601 msec_delay(5);
2602 }
2603 if (mac_addr == NULL) {
2604 E1000_WRITE_REG_ARRAY(hw, E1000_RA, slot << 1, 0);
2605 E1000_WRITE_FLUSH(hw);
2606 E1000_WRITE_REG_ARRAY(hw, E1000_RA, (slot << 1) + 1, 0);
2607 E1000_WRITE_FLUSH(hw);
2608 /* Clear both the flag and MAC address */
2609 Adapter->unicst_addr[slot].reg.high = 0;
2610 Adapter->unicst_addr[slot].reg.low = 0;
2611 } else {
2612 bcopy(mac_addr, Adapter->unicst_addr[slot].mac.addr,
2613 ETHERADDRL);
2614 (void) e1000_rar_set(hw, (uint8_t *)mac_addr, slot);
2615 Adapter->unicst_addr[slot].mac.set = 1;
2616 }
2617
2618 /* Workaround for an erratum of 82571 chipst */
2619 if (slot == 0) {
2620 if ((hw->mac.type == e1000_82571) &&
2621 (e1000_get_laa_state_82571(hw) == B_TRUE))
2622 if (mac_addr == NULL) {
2623 E1000_WRITE_REG_ARRAY(hw, E1000_RA,
2624 slot << 1, 0);
2625 E1000_WRITE_FLUSH(hw);
2626 E1000_WRITE_REG_ARRAY(hw, E1000_RA,
2627 (slot << 1) + 1, 0);
2628 E1000_WRITE_FLUSH(hw);
2629 } else {
2630 (void) e1000_rar_set(hw, (uint8_t *)mac_addr,
2631 LAST_RAR_ENTRY);
2632 }
2633 }
2634
2635 /*
2636 * If we are using Wiseman rev 2.0 silicon, we will have previously
2637 * put the receive in reset, and disabled MWI, to work around some
2638 * HW errata. Now we should take the receiver out of reset, and
2639 * re-enabled if MWI if it was previously enabled by the PCI BIOS.
2640 */
2641 if ((hw->mac.type == e1000_82542) &&
2642 (hw->revision_id == E1000_REVISION_2)) {
2643 E1000_WRITE_REG(hw, E1000_RCTL, 0);
2644 msec_delay(1);
2645 if (hw->bus.pci_cmd_word & CMD_MEM_WRT_INVALIDATE)
2646 e1000_pci_set_mwi(hw);
2647 e1000g_rx_setup(Adapter);
2648 }
2649
2650 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK) {
2651 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_DEGRADED);
2652 return (EIO);
2653 }
2654
2655 return (0);
2656 }
2657
2658 static int
2659 multicst_add(struct e1000g *Adapter, const uint8_t *multiaddr)
2660 {
2661 struct e1000_hw *hw = &Adapter->shared;
2662 struct ether_addr *newtable;
2663 size_t new_len;
2664 size_t old_len;
2665 int res = 0;
2666
2667 if ((multiaddr[0] & 01) == 0) {
2668 res = EINVAL;
2669 e1000g_log(Adapter, CE_WARN, "Illegal multicast address");
2670 goto done;
2671 }
2672
2673 if (Adapter->mcast_count >= Adapter->mcast_max_num) {
2674 res = ENOENT;
2675 e1000g_log(Adapter, CE_WARN,
2676 "Adapter requested more than %d mcast addresses",
2677 Adapter->mcast_max_num);
2678 goto done;
2679 }
2680
2681
2682 if (Adapter->mcast_count == Adapter->mcast_alloc_count) {
2683 old_len = Adapter->mcast_alloc_count *
2684 sizeof (struct ether_addr);
2685 new_len = (Adapter->mcast_alloc_count + MCAST_ALLOC_SIZE) *
2686 sizeof (struct ether_addr);
2687
2688 newtable = kmem_alloc(new_len, KM_NOSLEEP);
2689 if (newtable == NULL) {
2690 res = ENOMEM;
2691 e1000g_log(Adapter, CE_WARN,
2692 "Not enough memory to alloc mcast table");
2693 goto done;
2694 }
2695
2696 if (Adapter->mcast_table != NULL) {
2697 bcopy(Adapter->mcast_table, newtable, old_len);
2698 kmem_free(Adapter->mcast_table, old_len);
2699 }
2700 Adapter->mcast_alloc_count += MCAST_ALLOC_SIZE;
2701 Adapter->mcast_table = newtable;
2702 }
2703
2704 bcopy(multiaddr,
2705 &Adapter->mcast_table[Adapter->mcast_count], ETHERADDRL);
2706 Adapter->mcast_count++;
2707
2708 /*
2709 * Update the MC table in the hardware
2710 */
2711 e1000g_clear_interrupt(Adapter);
2712
2713 e1000_update_mc_addr_list(hw,
2714 (uint8_t *)Adapter->mcast_table, Adapter->mcast_count);
2715
2716 e1000g_mask_interrupt(Adapter);
2717
2718 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK) {
2719 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_DEGRADED);
2720 res = EIO;
2721 }
2722
2723 done:
2724 return (res);
2725 }
2726
2727 static int
2728 multicst_remove(struct e1000g *Adapter, const uint8_t *multiaddr)
2729 {
2730 struct e1000_hw *hw = &Adapter->shared;
2731 struct ether_addr *newtable;
2732 size_t new_len;
2733 size_t old_len;
2734 unsigned i;
2735
2736 for (i = 0; i < Adapter->mcast_count; i++) {
2737 if (bcmp(multiaddr, &Adapter->mcast_table[i],
2738 ETHERADDRL) == 0) {
2739 for (i++; i < Adapter->mcast_count; i++) {
2740 Adapter->mcast_table[i - 1] =
2741 Adapter->mcast_table[i];
2742 }
2743 Adapter->mcast_count--;
2744 break;
2745 }
2746 }
2747
2748 if ((Adapter->mcast_alloc_count - Adapter->mcast_count) >
2749 MCAST_ALLOC_SIZE) {
2750 old_len = Adapter->mcast_alloc_count *
2751 sizeof (struct ether_addr);
2752 new_len = (Adapter->mcast_alloc_count - MCAST_ALLOC_SIZE) *
2753 sizeof (struct ether_addr);
2754
2755 newtable = kmem_alloc(new_len, KM_NOSLEEP);
2756 if (newtable != NULL) {
2757 bcopy(Adapter->mcast_table, newtable, new_len);
2758 kmem_free(Adapter->mcast_table, old_len);
2759
2760 Adapter->mcast_alloc_count -= MCAST_ALLOC_SIZE;
2761 Adapter->mcast_table = newtable;
2762 }
2763 }
2764
2765 /*
2766 * Update the MC table in the hardware
2767 */
2768 e1000g_clear_interrupt(Adapter);
2769
2770 e1000_update_mc_addr_list(hw,
2771 (uint8_t *)Adapter->mcast_table, Adapter->mcast_count);
2772
2773 e1000g_mask_interrupt(Adapter);
2774
2775 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK) {
2776 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_DEGRADED);
2777 return (EIO);
2778 }
2779
2780 return (0);
2781 }
2782
2783 static void
2784 e1000g_release_multicast(struct e1000g *Adapter)
2785 {
2786 if (Adapter->mcast_table != NULL) {
2787 kmem_free(Adapter->mcast_table,
2788 Adapter->mcast_alloc_count * sizeof (struct ether_addr));
2789 Adapter->mcast_table = NULL;
2790 }
2791 }
2792
2793 int
2794 e1000g_m_multicst(void *arg, boolean_t add, const uint8_t *addr)
2795 {
2796 struct e1000g *Adapter = (struct e1000g *)arg;
2797 int result;
2798
2799 rw_enter(&Adapter->chip_lock, RW_WRITER);
2800
2801 if (Adapter->e1000g_state & E1000G_SUSPENDED) {
2802 result = ECANCELED;
2803 goto done;
2804 }
2805
2806 result = (add) ? multicst_add(Adapter, addr)
2807 : multicst_remove(Adapter, addr);
2808
2809 done:
2810 rw_exit(&Adapter->chip_lock);
2811 return (result);
2812
2813 }
2814
2815 int
2816 e1000g_m_promisc(void *arg, boolean_t on)
2817 {
2818 struct e1000g *Adapter = (struct e1000g *)arg;
2819 uint32_t rctl;
2820
2821 rw_enter(&Adapter->chip_lock, RW_WRITER);
2822
2823 if (Adapter->e1000g_state & E1000G_SUSPENDED) {
2824 rw_exit(&Adapter->chip_lock);
2825 return (ECANCELED);
2826 }
2827
2828 rctl = E1000_READ_REG(&Adapter->shared, E1000_RCTL);
2829
2830 if (on)
2831 rctl |=
2832 (E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_BAM);
2833 else
2834 rctl &= (~(E1000_RCTL_UPE | E1000_RCTL_MPE));
2835
2836 E1000_WRITE_REG(&Adapter->shared, E1000_RCTL, rctl);
2837
2838 Adapter->e1000g_promisc = on;
2839
2840 rw_exit(&Adapter->chip_lock);
2841
2842 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK) {
2843 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_DEGRADED);
2844 return (EIO);
2845 }
2846
2847 return (0);
2848 }
2849
2850 /*
2851 * Entry points to enable and disable interrupts at the granularity of
2852 * a group.
2853 * Turns the poll_mode for the whole adapter on and off to enable or
2854 * override the ring level polling control over the hardware interrupts.
2855 */
2856 static int
2857 e1000g_rx_group_intr_enable(mac_intr_handle_t arg)
2858 {
2859 struct e1000g *adapter = (struct e1000g *)arg;
2860 e1000g_rx_ring_t *rx_ring = adapter->rx_ring;
2861
2862 /*
2863 * Later interrupts at the granularity of the this ring will
2864 * invoke mac_rx() with NULL, indicating the need for another
2865 * software classification.
2866 * We have a single ring usable per adapter now, so we only need to
2867 * reset the rx handle for that one.
2868 * When more RX rings can be used, we should update each one of them.
2869 */
2870 mutex_enter(&rx_ring->rx_lock);
2871 rx_ring->mrh = NULL;
2872 adapter->poll_mode = B_FALSE;
2873 mutex_exit(&rx_ring->rx_lock);
2874 return (0);
2875 }
2876
2877 static int
2878 e1000g_rx_group_intr_disable(mac_intr_handle_t arg)
2879 {
2880 struct e1000g *adapter = (struct e1000g *)arg;
2881 e1000g_rx_ring_t *rx_ring = adapter->rx_ring;
2882
2883 mutex_enter(&rx_ring->rx_lock);
2884
2885 /*
2886 * Later interrupts at the granularity of the this ring will
2887 * invoke mac_rx() with the handle for this ring;
2888 */
2889 adapter->poll_mode = B_TRUE;
2890 rx_ring->mrh = rx_ring->mrh_init;
2891 mutex_exit(&rx_ring->rx_lock);
2892 return (0);
2893 }
2894
2895 /*
2896 * Entry points to enable and disable interrupts at the granularity of
2897 * a ring.
2898 * adapter poll_mode controls whether we actually proceed with hardware
2899 * interrupt toggling.
2900 */
2901 static int
2902 e1000g_rx_ring_intr_enable(mac_intr_handle_t intrh)
2903 {
2904 e1000g_rx_ring_t *rx_ring = (e1000g_rx_ring_t *)intrh;
2905 struct e1000g *adapter = rx_ring->adapter;
2906 struct e1000_hw *hw = &adapter->shared;
2907 uint32_t intr_mask;
2908
2909 rw_enter(&adapter->chip_lock, RW_READER);
2910
2911 if (adapter->e1000g_state & E1000G_SUSPENDED) {
2912 rw_exit(&adapter->chip_lock);
2913 return (0);
2914 }
2915
2916 mutex_enter(&rx_ring->rx_lock);
2917 rx_ring->poll_flag = 0;
2918 mutex_exit(&rx_ring->rx_lock);
2919
2920 /* Rx interrupt enabling for MSI and legacy */
2921 intr_mask = E1000_READ_REG(hw, E1000_IMS);
2922 intr_mask |= E1000_IMS_RXT0;
2923 E1000_WRITE_REG(hw, E1000_IMS, intr_mask);
2924 E1000_WRITE_FLUSH(hw);
2925
2926 /* Trigger a Rx interrupt to check Rx ring */
2927 E1000_WRITE_REG(hw, E1000_ICS, E1000_IMS_RXT0);
2928 E1000_WRITE_FLUSH(hw);
2929
2930 rw_exit(&adapter->chip_lock);
2931 return (0);
2932 }
2933
2934 static int
2935 e1000g_rx_ring_intr_disable(mac_intr_handle_t intrh)
2936 {
2937 e1000g_rx_ring_t *rx_ring = (e1000g_rx_ring_t *)intrh;
2938 struct e1000g *adapter = rx_ring->adapter;
2939 struct e1000_hw *hw = &adapter->shared;
2940
2941 rw_enter(&adapter->chip_lock, RW_READER);
2942
2943 if (adapter->e1000g_state & E1000G_SUSPENDED) {
2944 rw_exit(&adapter->chip_lock);
2945 return (0);
2946 }
2947 mutex_enter(&rx_ring->rx_lock);
2948 rx_ring->poll_flag = 1;
2949 mutex_exit(&rx_ring->rx_lock);
2950
2951 /* Rx interrupt disabling for MSI and legacy */
2952 E1000_WRITE_REG(hw, E1000_IMC, E1000_IMS_RXT0);
2953 E1000_WRITE_FLUSH(hw);
2954
2955 rw_exit(&adapter->chip_lock);
2956 return (0);
2957 }
2958
2959 /*
2960 * e1000g_unicst_find - Find the slot for the specified unicast address
2961 */
2962 static int
2963 e1000g_unicst_find(struct e1000g *Adapter, const uint8_t *mac_addr)
2964 {
2965 int slot;
2966
2967 for (slot = 0; slot < Adapter->unicst_total; slot++) {
2968 if ((Adapter->unicst_addr[slot].mac.set == 1) &&
2969 (bcmp(Adapter->unicst_addr[slot].mac.addr,
2970 mac_addr, ETHERADDRL) == 0))
2971 return (slot);
2972 }
2973
2974 return (-1);
2975 }
2976
2977 /*
2978 * Entry points to add and remove a MAC address to a ring group.
2979 * The caller takes care of adding and removing the MAC addresses
2980 * to the filter via these two routines.
2981 */
2982
2983 static int
2984 e1000g_addmac(void *arg, const uint8_t *mac_addr)
2985 {
2986 struct e1000g *Adapter = (struct e1000g *)arg;
2987 int slot, err;
2988
2989 rw_enter(&Adapter->chip_lock, RW_WRITER);
2990
2991 if (Adapter->e1000g_state & E1000G_SUSPENDED) {
2992 rw_exit(&Adapter->chip_lock);
2993 return (ECANCELED);
2994 }
2995
2996 if (e1000g_unicst_find(Adapter, mac_addr) != -1) {
2997 /* The same address is already in slot */
2998 rw_exit(&Adapter->chip_lock);
2999 return (0);
3000 }
3001
3002 if (Adapter->unicst_avail == 0) {
3003 /* no slots available */
3004 rw_exit(&Adapter->chip_lock);
3005 return (ENOSPC);
3006 }
3007
3008 /* Search for a free slot */
3009 for (slot = 0; slot < Adapter->unicst_total; slot++) {
3010 if (Adapter->unicst_addr[slot].mac.set == 0)
3011 break;
3012 }
3013 ASSERT(slot < Adapter->unicst_total);
3014
3015 err = e1000g_unicst_set(Adapter, mac_addr, slot);
3016 if (err == 0)
3017 Adapter->unicst_avail--;
3018
3019 rw_exit(&Adapter->chip_lock);
3020
3021 return (err);
3022 }
3023
3024 static int
3025 e1000g_remmac(void *arg, const uint8_t *mac_addr)
3026 {
3027 struct e1000g *Adapter = (struct e1000g *)arg;
3028 int slot, err;
3029
3030 rw_enter(&Adapter->chip_lock, RW_WRITER);
3031
3032 if (Adapter->e1000g_state & E1000G_SUSPENDED) {
3033 rw_exit(&Adapter->chip_lock);
3034 return (ECANCELED);
3035 }
3036
3037 slot = e1000g_unicst_find(Adapter, mac_addr);
3038 if (slot == -1) {
3039 rw_exit(&Adapter->chip_lock);
3040 return (EINVAL);
3041 }
3042
3043 ASSERT(Adapter->unicst_addr[slot].mac.set);
3044
3045 /* Clear this slot */
3046 err = e1000g_unicst_set(Adapter, NULL, slot);
3047 if (err == 0)
3048 Adapter->unicst_avail++;
3049
3050 rw_exit(&Adapter->chip_lock);
3051
3052 return (err);
3053 }
3054
3055 static int
3056 e1000g_ring_start(mac_ring_driver_t rh, uint64_t mr_gen_num)
3057 {
3058 e1000g_rx_ring_t *rx_ring = (e1000g_rx_ring_t *)rh;
3059
3060 mutex_enter(&rx_ring->rx_lock);
3061 rx_ring->ring_gen_num = mr_gen_num;
3062 mutex_exit(&rx_ring->rx_lock);
3063 return (0);
3064 }
3065
3066 /*
3067 * Callback funtion for MAC layer to register all rings.
3068 *
3069 * The hardware supports a single group with currently only one ring
3070 * available.
3071 * Though not offering virtualization ability per se, exposing the
3072 * group/ring still enables the polling and interrupt toggling.
3073 */
3074 /* ARGSUSED */
3075 void
3076 e1000g_fill_ring(void *arg, mac_ring_type_t rtype, const int grp_index,
3077 const int ring_index, mac_ring_info_t *infop, mac_ring_handle_t rh)
3078 {
3079 struct e1000g *Adapter = (struct e1000g *)arg;
3080 e1000g_rx_ring_t *rx_ring = Adapter->rx_ring;
3081 mac_intr_t *mintr;
3082
3083 /*
3084 * We advertised only RX group/rings, so the MAC framework shouldn't
3085 * ask for any thing else.
3086 */
3087 ASSERT(rtype == MAC_RING_TYPE_RX && grp_index == 0 && ring_index == 0);
3088
3089 rx_ring->mrh = rx_ring->mrh_init = rh;
3090 infop->mri_driver = (mac_ring_driver_t)rx_ring;
3091 infop->mri_start = e1000g_ring_start;
3092 infop->mri_stop = NULL;
3093 infop->mri_poll = e1000g_poll_ring;
3094 infop->mri_stat = e1000g_rx_ring_stat;
3095
3096 /* Ring level interrupts */
3097 mintr = &infop->mri_intr;
3098 mintr->mi_handle = (mac_intr_handle_t)rx_ring;
3099 mintr->mi_enable = e1000g_rx_ring_intr_enable;
3100 mintr->mi_disable = e1000g_rx_ring_intr_disable;
3101 if (Adapter->msi_enable)
3102 mintr->mi_ddi_handle = Adapter->htable[0];
3103 }
3104
3105 /* ARGSUSED */
3106 static void
3107 e1000g_fill_group(void *arg, mac_ring_type_t rtype, const int grp_index,
3108 mac_group_info_t *infop, mac_group_handle_t gh)
3109 {
3110 struct e1000g *Adapter = (struct e1000g *)arg;
3111 mac_intr_t *mintr;
3112
3113 /*
3114 * We advertised a single RX ring. Getting a request for anything else
3115 * signifies a bug in the MAC framework.
3116 */
3117 ASSERT(rtype == MAC_RING_TYPE_RX && grp_index == 0);
3118
3119 Adapter->rx_group = gh;
3120
3121 infop->mgi_driver = (mac_group_driver_t)Adapter;
3122 infop->mgi_start = NULL;
3123 infop->mgi_stop = NULL;
3124 infop->mgi_addmac = e1000g_addmac;
3125 infop->mgi_remmac = e1000g_remmac;
3126 infop->mgi_count = 1;
3127
3128 /* Group level interrupts */
3129 mintr = &infop->mgi_intr;
3130 mintr->mi_handle = (mac_intr_handle_t)Adapter;
3131 mintr->mi_enable = e1000g_rx_group_intr_enable;
3132 mintr->mi_disable = e1000g_rx_group_intr_disable;
3133 }
3134
3135 static boolean_t
3136 e1000g_m_getcapab(void *arg, mac_capab_t cap, void *cap_data)
3137 {
3138 struct e1000g *Adapter = (struct e1000g *)arg;
3139
3140 switch (cap) {
3141 case MAC_CAPAB_HCKSUM: {
3142 uint32_t *txflags = cap_data;
3143
3144 if (Adapter->tx_hcksum_enable)
3145 *txflags = HCKSUM_IPHDRCKSUM |
3146 HCKSUM_INET_PARTIAL;
3147 else
3148 return (B_FALSE);
3149 break;
3150 }
3151
3152 case MAC_CAPAB_LSO: {
3153 mac_capab_lso_t *cap_lso = cap_data;
3154
3155 if (Adapter->lso_enable) {
3156 cap_lso->lso_flags = LSO_TX_BASIC_TCP_IPV4;
3157 cap_lso->lso_basic_tcp_ipv4.lso_max =
3158 E1000_LSO_MAXLEN;
3159 } else
3160 return (B_FALSE);
3161 break;
3162 }
3163 case MAC_CAPAB_RINGS: {
3164 mac_capab_rings_t *cap_rings = cap_data;
3165
3166 /* No TX rings exposed yet */
3167 if (cap_rings->mr_type != MAC_RING_TYPE_RX)
3168 return (B_FALSE);
3169
3170 cap_rings->mr_group_type = MAC_GROUP_TYPE_STATIC;
3171 cap_rings->mr_rnum = 1;
3172 cap_rings->mr_gnum = 1;
3173 cap_rings->mr_rget = e1000g_fill_ring;
3174 cap_rings->mr_gget = e1000g_fill_group;
3175 break;
3176 }
3177 default:
3178 return (B_FALSE);
3179 }
3180 return (B_TRUE);
3181 }
3182
3183 static boolean_t
3184 e1000g_param_locked(mac_prop_id_t pr_num)
3185 {
3186 /*
3187 * All en_* parameters are locked (read-only) while
3188 * the device is in any sort of loopback mode ...
3189 */
3190 switch (pr_num) {
3191 case MAC_PROP_EN_1000FDX_CAP:
3192 case MAC_PROP_EN_1000HDX_CAP:
3193 case MAC_PROP_EN_100FDX_CAP:
3194 case MAC_PROP_EN_100HDX_CAP:
3195 case MAC_PROP_EN_10FDX_CAP:
3196 case MAC_PROP_EN_10HDX_CAP:
3197 case MAC_PROP_AUTONEG:
3198 case MAC_PROP_FLOWCTRL:
3199 return (B_TRUE);
3200 }
3201 return (B_FALSE);
3202 }
3203
3204 /*
3205 * callback function for set/get of properties
3206 */
3207 static int
3208 e1000g_m_setprop(void *arg, const char *pr_name, mac_prop_id_t pr_num,
3209 uint_t pr_valsize, const void *pr_val)
3210 {
3211 struct e1000g *Adapter = arg;
3212 struct e1000_hw *hw = &Adapter->shared;
3213 struct e1000_fc_info *fc = &Adapter->shared.fc;
3214 int err = 0;
3215 link_flowctrl_t flowctrl;
3216 uint32_t cur_mtu, new_mtu;
3217
3218 rw_enter(&Adapter->chip_lock, RW_WRITER);
3219
3220 if (Adapter->e1000g_state & E1000G_SUSPENDED) {
3221 rw_exit(&Adapter->chip_lock);
3222 return (ECANCELED);
3223 }
3224
3225 if (Adapter->loopback_mode != E1000G_LB_NONE &&
3226 e1000g_param_locked(pr_num)) {
3227 /*
3228 * All en_* parameters are locked (read-only)
3229 * while the device is in any sort of loopback mode.
3230 */
3231 rw_exit(&Adapter->chip_lock);
3232 return (EBUSY);
3233 }
3234
3235 switch (pr_num) {
3236 case MAC_PROP_EN_1000FDX_CAP:
3237 if (hw->phy.media_type != e1000_media_type_copper) {
3238 err = ENOTSUP;
3239 break;
3240 }
3241 Adapter->param_en_1000fdx = *(uint8_t *)pr_val;
3242 Adapter->param_adv_1000fdx = *(uint8_t *)pr_val;
3243 goto reset;
3244 case MAC_PROP_EN_100FDX_CAP:
3245 if (hw->phy.media_type != e1000_media_type_copper) {
3246 err = ENOTSUP;
3247 break;
3248 }
3249 Adapter->param_en_100fdx = *(uint8_t *)pr_val;
3250 Adapter->param_adv_100fdx = *(uint8_t *)pr_val;
3251 goto reset;
3252 case MAC_PROP_EN_100HDX_CAP:
3253 if (hw->phy.media_type != e1000_media_type_copper) {
3254 err = ENOTSUP;
3255 break;
3256 }
3257 Adapter->param_en_100hdx = *(uint8_t *)pr_val;
3258 Adapter->param_adv_100hdx = *(uint8_t *)pr_val;
3259 goto reset;
3260 case MAC_PROP_EN_10FDX_CAP:
3261 if (hw->phy.media_type != e1000_media_type_copper) {
3262 err = ENOTSUP;
3263 break;
3264 }
3265 Adapter->param_en_10fdx = *(uint8_t *)pr_val;
3266 Adapter->param_adv_10fdx = *(uint8_t *)pr_val;
3267 goto reset;
3268 case MAC_PROP_EN_10HDX_CAP:
3269 if (hw->phy.media_type != e1000_media_type_copper) {
3270 err = ENOTSUP;
3271 break;
3272 }
3273 Adapter->param_en_10hdx = *(uint8_t *)pr_val;
3274 Adapter->param_adv_10hdx = *(uint8_t *)pr_val;
3275 goto reset;
3276 case MAC_PROP_AUTONEG:
3277 if (hw->phy.media_type != e1000_media_type_copper) {
3278 err = ENOTSUP;
3279 break;
3280 }
3281 Adapter->param_adv_autoneg = *(uint8_t *)pr_val;
3282 goto reset;
3283 case MAC_PROP_FLOWCTRL:
3284 fc->send_xon = B_TRUE;
3285 bcopy(pr_val, &flowctrl, sizeof (flowctrl));
3286
3287 switch (flowctrl) {
3288 default:
3289 err = EINVAL;
3290 break;
3291 case LINK_FLOWCTRL_NONE:
3292 fc->requested_mode = e1000_fc_none;
3293 break;
3294 case LINK_FLOWCTRL_RX:
3295 fc->requested_mode = e1000_fc_rx_pause;
3296 break;
3297 case LINK_FLOWCTRL_TX:
3298 fc->requested_mode = e1000_fc_tx_pause;
3299 break;
3300 case LINK_FLOWCTRL_BI:
3301 fc->requested_mode = e1000_fc_full;
3302 break;
3303 }
3304 reset:
3305 if (err == 0) {
3306 /* check PCH limits & reset the link */
3307 e1000g_pch_limits(Adapter);
3308 if (e1000g_reset_link(Adapter) != DDI_SUCCESS)
3309 err = EINVAL;
3310 }
3311 break;
3312 case MAC_PROP_ADV_1000FDX_CAP:
3313 case MAC_PROP_ADV_1000HDX_CAP:
3314 case MAC_PROP_ADV_100FDX_CAP:
3315 case MAC_PROP_ADV_100HDX_CAP:
3316 case MAC_PROP_ADV_10FDX_CAP:
3317 case MAC_PROP_ADV_10HDX_CAP:
3318 case MAC_PROP_EN_1000HDX_CAP:
3319 case MAC_PROP_STATUS:
3320 case MAC_PROP_SPEED:
3321 case MAC_PROP_DUPLEX:
3322 err = ENOTSUP; /* read-only prop. Can't set this. */
3323 break;
3324 case MAC_PROP_MTU:
3325 /* adapter must be stopped for an MTU change */
3326 if (Adapter->e1000g_state & E1000G_STARTED) {
3327 err = EBUSY;
3328 break;
3329 }
3330
3331 cur_mtu = Adapter->default_mtu;
3332
3333 /* get new requested MTU */
3334 bcopy(pr_val, &new_mtu, sizeof (new_mtu));
3335 if (new_mtu == cur_mtu) {
3336 err = 0;
3337 break;
3338 }
3339
3340 if ((new_mtu < DEFAULT_MTU) ||
3341 (new_mtu > Adapter->max_mtu)) {
3342 err = EINVAL;
3343 break;
3344 }
3345
3346 /* inform MAC framework of new MTU */
3347 err = mac_maxsdu_update(Adapter->mh, new_mtu);
3348
3349 if (err == 0) {
3350 Adapter->default_mtu = new_mtu;
3351 Adapter->max_frame_size =
3352 e1000g_mtu2maxframe(new_mtu);
3353
3354 /*
3355 * check PCH limits & set buffer sizes to
3356 * match new MTU
3357 */
3358 e1000g_pch_limits(Adapter);
3359 e1000g_set_bufsize(Adapter);
3360
3361 /*
3362 * decrease the number of descriptors and free
3363 * packets for jumbo frames to reduce tx/rx
3364 * resource consumption
3365 */
3366 if (Adapter->max_frame_size >=
3367 (FRAME_SIZE_UPTO_4K)) {
3368 if (Adapter->tx_desc_num_flag == 0)
3369 Adapter->tx_desc_num =
3370 DEFAULT_JUMBO_NUM_TX_DESC;
3371
3372 if (Adapter->rx_desc_num_flag == 0)
3373 Adapter->rx_desc_num =
3374 DEFAULT_JUMBO_NUM_RX_DESC;
3375
3376 if (Adapter->tx_buf_num_flag == 0)
3377 Adapter->tx_freelist_num =
3378 DEFAULT_JUMBO_NUM_TX_BUF;
3379
3380 if (Adapter->rx_buf_num_flag == 0)
3381 Adapter->rx_freelist_limit =
3382 DEFAULT_JUMBO_NUM_RX_BUF;
3383 } else {
3384 if (Adapter->tx_desc_num_flag == 0)
3385 Adapter->tx_desc_num =
3386 DEFAULT_NUM_TX_DESCRIPTOR;
3387
3388 if (Adapter->rx_desc_num_flag == 0)
3389 Adapter->rx_desc_num =
3390 DEFAULT_NUM_RX_DESCRIPTOR;
3391
3392 if (Adapter->tx_buf_num_flag == 0)
3393 Adapter->tx_freelist_num =
3394 DEFAULT_NUM_TX_FREELIST;
3395
3396 if (Adapter->rx_buf_num_flag == 0)
3397 Adapter->rx_freelist_limit =
3398 DEFAULT_NUM_RX_FREELIST;
3399 }
3400 }
3401 break;
3402 case MAC_PROP_PRIVATE:
3403 err = e1000g_set_priv_prop(Adapter, pr_name,
3404 pr_valsize, pr_val);
3405 break;
3406 default:
3407 err = ENOTSUP;
3408 break;
3409 }
3410 rw_exit(&Adapter->chip_lock);
3411 return (err);
3412 }
3413
3414 static int
3415 e1000g_m_getprop(void *arg, const char *pr_name, mac_prop_id_t pr_num,
3416 uint_t pr_valsize, void *pr_val)
3417 {
3418 struct e1000g *Adapter = arg;
3419 struct e1000_fc_info *fc = &Adapter->shared.fc;
3420 int err = 0;
3421 link_flowctrl_t flowctrl;
3422 uint64_t tmp = 0;
3423
3424 switch (pr_num) {
3425 case MAC_PROP_DUPLEX:
3426 ASSERT(pr_valsize >= sizeof (link_duplex_t));
3427 bcopy(&Adapter->link_duplex, pr_val,
3428 sizeof (link_duplex_t));
3429 break;
3430 case MAC_PROP_SPEED:
3431 ASSERT(pr_valsize >= sizeof (uint64_t));
3432 tmp = Adapter->link_speed * 1000000ull;
3433 bcopy(&tmp, pr_val, sizeof (tmp));
3434 break;
3435 case MAC_PROP_AUTONEG:
3436 *(uint8_t *)pr_val = Adapter->param_adv_autoneg;
3437 break;
3438 case MAC_PROP_FLOWCTRL:
3439 ASSERT(pr_valsize >= sizeof (link_flowctrl_t));
3440 switch (fc->current_mode) {
3441 case e1000_fc_none:
3442 flowctrl = LINK_FLOWCTRL_NONE;
3443 break;
3444 case e1000_fc_rx_pause:
3445 flowctrl = LINK_FLOWCTRL_RX;
3446 break;
3447 case e1000_fc_tx_pause:
3448 flowctrl = LINK_FLOWCTRL_TX;
3449 break;
3450 case e1000_fc_full:
3451 flowctrl = LINK_FLOWCTRL_BI;
3452 break;
3453 }
3454 bcopy(&flowctrl, pr_val, sizeof (flowctrl));
3455 break;
3456 case MAC_PROP_ADV_1000FDX_CAP:
3457 *(uint8_t *)pr_val = Adapter->param_adv_1000fdx;
3458 break;
3459 case MAC_PROP_EN_1000FDX_CAP:
3460 *(uint8_t *)pr_val = Adapter->param_en_1000fdx;
3461 break;
3462 case MAC_PROP_ADV_1000HDX_CAP:
3463 *(uint8_t *)pr_val = Adapter->param_adv_1000hdx;
3464 break;
3465 case MAC_PROP_EN_1000HDX_CAP:
3466 *(uint8_t *)pr_val = Adapter->param_en_1000hdx;
3467 break;
3468 case MAC_PROP_ADV_100FDX_CAP:
3469 *(uint8_t *)pr_val = Adapter->param_adv_100fdx;
3470 break;
3471 case MAC_PROP_EN_100FDX_CAP:
3472 *(uint8_t *)pr_val = Adapter->param_en_100fdx;
3473 break;
3474 case MAC_PROP_ADV_100HDX_CAP:
3475 *(uint8_t *)pr_val = Adapter->param_adv_100hdx;
3476 break;
3477 case MAC_PROP_EN_100HDX_CAP:
3478 *(uint8_t *)pr_val = Adapter->param_en_100hdx;
3479 break;
3480 case MAC_PROP_ADV_10FDX_CAP:
3481 *(uint8_t *)pr_val = Adapter->param_adv_10fdx;
3482 break;
3483 case MAC_PROP_EN_10FDX_CAP:
3484 *(uint8_t *)pr_val = Adapter->param_en_10fdx;
3485 break;
3486 case MAC_PROP_ADV_10HDX_CAP:
3487 *(uint8_t *)pr_val = Adapter->param_adv_10hdx;
3488 break;
3489 case MAC_PROP_EN_10HDX_CAP:
3490 *(uint8_t *)pr_val = Adapter->param_en_10hdx;
3491 break;
3492 case MAC_PROP_ADV_100T4_CAP:
3493 case MAC_PROP_EN_100T4_CAP:
3494 *(uint8_t *)pr_val = Adapter->param_adv_100t4;
3495 break;
3496 case MAC_PROP_PRIVATE:
3497 err = e1000g_get_priv_prop(Adapter, pr_name,
3498 pr_valsize, pr_val);
3499 break;
3500 default:
3501 err = ENOTSUP;
3502 break;
3503 }
3504
3505 return (err);
3506 }
3507
3508 static void
3509 e1000g_m_propinfo(void *arg, const char *pr_name, mac_prop_id_t pr_num,
3510 mac_prop_info_handle_t prh)
3511 {
3512 struct e1000g *Adapter = arg;
3513 struct e1000_hw *hw = &Adapter->shared;
3514
3515 switch (pr_num) {
3516 case MAC_PROP_DUPLEX:
3517 case MAC_PROP_SPEED:
3518 case MAC_PROP_ADV_1000FDX_CAP:
3519 case MAC_PROP_ADV_1000HDX_CAP:
3520 case MAC_PROP_ADV_100FDX_CAP:
3521 case MAC_PROP_ADV_100HDX_CAP:
3522 case MAC_PROP_ADV_10FDX_CAP:
3523 case MAC_PROP_ADV_10HDX_CAP:
3524 case MAC_PROP_ADV_100T4_CAP:
3525 case MAC_PROP_EN_100T4_CAP:
3526 mac_prop_info_set_perm(prh, MAC_PROP_PERM_READ);
3527 break;
3528
3529 case MAC_PROP_EN_1000FDX_CAP:
3530 if (hw->phy.media_type != e1000_media_type_copper) {
3531 mac_prop_info_set_perm(prh, MAC_PROP_PERM_READ);
3532 } else {
3533 mac_prop_info_set_default_uint8(prh,
3534 ((Adapter->phy_ext_status &
3535 IEEE_ESR_1000T_FD_CAPS) ||
3536 (Adapter->phy_ext_status &
3537 IEEE_ESR_1000X_FD_CAPS)) ? 1 : 0);
3538 }
3539 break;
3540
3541 case MAC_PROP_EN_100FDX_CAP:
3542 if (hw->phy.media_type != e1000_media_type_copper) {
3543 mac_prop_info_set_perm(prh, MAC_PROP_PERM_READ);
3544 } else {
3545 mac_prop_info_set_default_uint8(prh,
3546 ((Adapter->phy_status & MII_SR_100X_FD_CAPS) ||
3547 (Adapter->phy_status & MII_SR_100T2_FD_CAPS))
3548 ? 1 : 0);
3549 }
3550 break;
3551
3552 case MAC_PROP_EN_100HDX_CAP:
3553 if (hw->phy.media_type != e1000_media_type_copper) {
3554 mac_prop_info_set_perm(prh, MAC_PROP_PERM_READ);
3555 } else {
3556 mac_prop_info_set_default_uint8(prh,
3557 ((Adapter->phy_status & MII_SR_100X_HD_CAPS) ||
3558 (Adapter->phy_status & MII_SR_100T2_HD_CAPS))
3559 ? 1 : 0);
3560 }
3561 break;
3562
3563 case MAC_PROP_EN_10FDX_CAP:
3564 if (hw->phy.media_type != e1000_media_type_copper) {
3565 mac_prop_info_set_perm(prh, MAC_PROP_PERM_READ);
3566 } else {
3567 mac_prop_info_set_default_uint8(prh,
3568 (Adapter->phy_status & MII_SR_10T_FD_CAPS) ? 1 : 0);
3569 }
3570 break;
3571
3572 case MAC_PROP_EN_10HDX_CAP:
3573 if (hw->phy.media_type != e1000_media_type_copper) {
3574 mac_prop_info_set_perm(prh, MAC_PROP_PERM_READ);
3575 } else {
3576 mac_prop_info_set_default_uint8(prh,
3577 (Adapter->phy_status & MII_SR_10T_HD_CAPS) ? 1 : 0);
3578 }
3579 break;
3580
3581 case MAC_PROP_EN_1000HDX_CAP:
3582 if (hw->phy.media_type != e1000_media_type_copper)
3583 mac_prop_info_set_perm(prh, MAC_PROP_PERM_READ);
3584 break;
3585
3586 case MAC_PROP_AUTONEG:
3587 if (hw->phy.media_type != e1000_media_type_copper) {
3588 mac_prop_info_set_perm(prh, MAC_PROP_PERM_READ);
3589 } else {
3590 mac_prop_info_set_default_uint8(prh,
3591 (Adapter->phy_status & MII_SR_AUTONEG_CAPS)
3592 ? 1 : 0);
3593 }
3594 break;
3595
3596 case MAC_PROP_FLOWCTRL:
3597 mac_prop_info_set_default_link_flowctrl(prh, LINK_FLOWCTRL_BI);
3598 break;
3599
3600 case MAC_PROP_MTU: {
3601 struct e1000_mac_info *mac = &Adapter->shared.mac;
3602 struct e1000_phy_info *phy = &Adapter->shared.phy;
3603 uint32_t max;
3604
3605 /* some MAC types do not support jumbo frames */
3606 if ((mac->type == e1000_ich8lan) ||
3607 ((mac->type == e1000_ich9lan) && (phy->type ==
3608 e1000_phy_ife))) {
3609 max = DEFAULT_MTU;
3610 } else {
3611 max = Adapter->max_mtu;
3612 }
3613
3614 mac_prop_info_set_range_uint32(prh, DEFAULT_MTU, max);
3615 break;
3616 }
3617 case MAC_PROP_PRIVATE: {
3618 char valstr[64];
3619 int value;
3620
3621 if (strcmp(pr_name, "_adv_pause_cap") == 0 ||
3622 strcmp(pr_name, "_adv_asym_pause_cap") == 0) {
3623 mac_prop_info_set_perm(prh, MAC_PROP_PERM_READ);
3624 return;
3625 } else if (strcmp(pr_name, "_tx_bcopy_threshold") == 0) {
3626 value = DEFAULT_TX_BCOPY_THRESHOLD;
3627 } else if (strcmp(pr_name, "_tx_interrupt_enable") == 0) {
3628 value = DEFAULT_TX_INTR_ENABLE;
3629 } else if (strcmp(pr_name, "_tx_intr_delay") == 0) {
3630 value = DEFAULT_TX_INTR_DELAY;
3631 } else if (strcmp(pr_name, "_tx_intr_abs_delay") == 0) {
3632 value = DEFAULT_TX_INTR_ABS_DELAY;
3633 } else if (strcmp(pr_name, "_rx_bcopy_threshold") == 0) {
3634 value = DEFAULT_RX_BCOPY_THRESHOLD;
3635 } else if (strcmp(pr_name, "_max_num_rcv_packets") == 0) {
3636 value = DEFAULT_RX_LIMIT_ON_INTR;
3637 } else if (strcmp(pr_name, "_rx_intr_delay") == 0) {
3638 value = DEFAULT_RX_INTR_DELAY;
3639 } else if (strcmp(pr_name, "_rx_intr_abs_delay") == 0) {
3640 value = DEFAULT_RX_INTR_ABS_DELAY;
3641 } else if (strcmp(pr_name, "_intr_throttling_rate") == 0) {
3642 value = DEFAULT_INTR_THROTTLING;
3643 } else if (strcmp(pr_name, "_intr_adaptive") == 0) {
3644 value = 1;
3645 } else {
3646 return;
3647 }
3648
3649 (void) snprintf(valstr, sizeof (valstr), "%d", value);
3650 mac_prop_info_set_default_str(prh, valstr);
3651 break;
3652 }
3653 }
3654 }
3655
3656 /* ARGSUSED2 */
3657 static int
3658 e1000g_set_priv_prop(struct e1000g *Adapter, const char *pr_name,
3659 uint_t pr_valsize, const void *pr_val)
3660 {
3661 int err = 0;
3662 long result;
3663 struct e1000_hw *hw = &Adapter->shared;
3664
3665 if (strcmp(pr_name, "_tx_bcopy_threshold") == 0) {
3666 if (pr_val == NULL) {
3667 err = EINVAL;
3668 return (err);
3669 }
3670 (void) ddi_strtol(pr_val, (char **)NULL, 0, &result);
3671 if (result < MIN_TX_BCOPY_THRESHOLD ||
3672 result > MAX_TX_BCOPY_THRESHOLD)
3673 err = EINVAL;
3674 else {
3675 Adapter->tx_bcopy_thresh = (uint32_t)result;
3676 }
3677 return (err);
3678 }
3679 if (strcmp(pr_name, "_tx_interrupt_enable") == 0) {
3680 if (pr_val == NULL) {
3681 err = EINVAL;
3682 return (err);
3683 }
3684 (void) ddi_strtol(pr_val, (char **)NULL, 0, &result);
3685 if (result < 0 || result > 1)
3686 err = EINVAL;
3687 else {
3688 Adapter->tx_intr_enable = (result == 1) ?
3689 B_TRUE: B_FALSE;
3690 if (Adapter->tx_intr_enable)
3691 e1000g_mask_tx_interrupt(Adapter);
3692 else
3693 e1000g_clear_tx_interrupt(Adapter);
3694 if (e1000g_check_acc_handle(
3695 Adapter->osdep.reg_handle) != DDI_FM_OK) {
3696 ddi_fm_service_impact(Adapter->dip,
3697 DDI_SERVICE_DEGRADED);
3698 err = EIO;
3699 }
3700 }
3701 return (err);
3702 }
3703 if (strcmp(pr_name, "_tx_intr_delay") == 0) {
3704 if (pr_val == NULL) {
3705 err = EINVAL;
3706 return (err);
3707 }
3708 (void) ddi_strtol(pr_val, (char **)NULL, 0, &result);
3709 if (result < MIN_TX_INTR_DELAY ||
3710 result > MAX_TX_INTR_DELAY)
3711 err = EINVAL;
3712 else {
3713 Adapter->tx_intr_delay = (uint32_t)result;
3714 E1000_WRITE_REG(hw, E1000_TIDV, Adapter->tx_intr_delay);
3715 if (e1000g_check_acc_handle(
3716 Adapter->osdep.reg_handle) != DDI_FM_OK) {
3717 ddi_fm_service_impact(Adapter->dip,
3718 DDI_SERVICE_DEGRADED);
3719 err = EIO;
3720 }
3721 }
3722 return (err);
3723 }
3724 if (strcmp(pr_name, "_tx_intr_abs_delay") == 0) {
3725 if (pr_val == NULL) {
3726 err = EINVAL;
3727 return (err);
3728 }
3729 (void) ddi_strtol(pr_val, (char **)NULL, 0, &result);
3730 if (result < MIN_TX_INTR_ABS_DELAY ||
3731 result > MAX_TX_INTR_ABS_DELAY)
3732 err = EINVAL;
3733 else {
3734 Adapter->tx_intr_abs_delay = (uint32_t)result;
3735 E1000_WRITE_REG(hw, E1000_TADV,
3736 Adapter->tx_intr_abs_delay);
3737 if (e1000g_check_acc_handle(
3738 Adapter->osdep.reg_handle) != DDI_FM_OK) {
3739 ddi_fm_service_impact(Adapter->dip,
3740 DDI_SERVICE_DEGRADED);
3741 err = EIO;
3742 }
3743 }
3744 return (err);
3745 }
3746 if (strcmp(pr_name, "_rx_bcopy_threshold") == 0) {
3747 if (pr_val == NULL) {
3748 err = EINVAL;
3749 return (err);
3750 }
3751 (void) ddi_strtol(pr_val, (char **)NULL, 0, &result);
3752 if (result < MIN_RX_BCOPY_THRESHOLD ||
3753 result > MAX_RX_BCOPY_THRESHOLD)
3754 err = EINVAL;
3755 else
3756 Adapter->rx_bcopy_thresh = (uint32_t)result;
3757 return (err);
3758 }
3759 if (strcmp(pr_name, "_max_num_rcv_packets") == 0) {
3760 if (pr_val == NULL) {
3761 err = EINVAL;
3762 return (err);
3763 }
3764 (void) ddi_strtol(pr_val, (char **)NULL, 0, &result);
3765 if (result < MIN_RX_LIMIT_ON_INTR ||
3766 result > MAX_RX_LIMIT_ON_INTR)
3767 err = EINVAL;
3768 else
3769 Adapter->rx_limit_onintr = (uint32_t)result;
3770 return (err);
3771 }
3772 if (strcmp(pr_name, "_rx_intr_delay") == 0) {
3773 if (pr_val == NULL) {
3774 err = EINVAL;
3775 return (err);
3776 }
3777 (void) ddi_strtol(pr_val, (char **)NULL, 0, &result);
3778 if (result < MIN_RX_INTR_DELAY ||
3779 result > MAX_RX_INTR_DELAY)
3780 err = EINVAL;
3781 else {
3782 Adapter->rx_intr_delay = (uint32_t)result;
3783 E1000_WRITE_REG(hw, E1000_RDTR, Adapter->rx_intr_delay);
3784 if (e1000g_check_acc_handle(
3785 Adapter->osdep.reg_handle) != DDI_FM_OK) {
3786 ddi_fm_service_impact(Adapter->dip,
3787 DDI_SERVICE_DEGRADED);
3788 err = EIO;
3789 }
3790 }
3791 return (err);
3792 }
3793 if (strcmp(pr_name, "_rx_intr_abs_delay") == 0) {
3794 if (pr_val == NULL) {
3795 err = EINVAL;
3796 return (err);
3797 }
3798 (void) ddi_strtol(pr_val, (char **)NULL, 0, &result);
3799 if (result < MIN_RX_INTR_ABS_DELAY ||
3800 result > MAX_RX_INTR_ABS_DELAY)
3801 err = EINVAL;
3802 else {
3803 Adapter->rx_intr_abs_delay = (uint32_t)result;
3804 E1000_WRITE_REG(hw, E1000_RADV,
3805 Adapter->rx_intr_abs_delay);
3806 if (e1000g_check_acc_handle(
3807 Adapter->osdep.reg_handle) != DDI_FM_OK) {
3808 ddi_fm_service_impact(Adapter->dip,
3809 DDI_SERVICE_DEGRADED);
3810 err = EIO;
3811 }
3812 }
3813 return (err);
3814 }
3815 if (strcmp(pr_name, "_intr_throttling_rate") == 0) {
3816 if (pr_val == NULL) {
3817 err = EINVAL;
3818 return (err);
3819 }
3820 (void) ddi_strtol(pr_val, (char **)NULL, 0, &result);
3821 if (result < MIN_INTR_THROTTLING ||
3822 result > MAX_INTR_THROTTLING)
3823 err = EINVAL;
3824 else {
3825 if (hw->mac.type >= e1000_82540) {
3826 Adapter->intr_throttling_rate =
3827 (uint32_t)result;
3828 E1000_WRITE_REG(hw, E1000_ITR,
3829 Adapter->intr_throttling_rate);
3830 if (e1000g_check_acc_handle(
3831 Adapter->osdep.reg_handle) != DDI_FM_OK) {
3832 ddi_fm_service_impact(Adapter->dip,
3833 DDI_SERVICE_DEGRADED);
3834 err = EIO;
3835 }
3836 } else
3837 err = EINVAL;
3838 }
3839 return (err);
3840 }
3841 if (strcmp(pr_name, "_intr_adaptive") == 0) {
3842 if (pr_val == NULL) {
3843 err = EINVAL;
3844 return (err);
3845 }
3846 (void) ddi_strtol(pr_val, (char **)NULL, 0, &result);
3847 if (result < 0 || result > 1)
3848 err = EINVAL;
3849 else {
3850 if (hw->mac.type >= e1000_82540) {
3851 Adapter->intr_adaptive = (result == 1) ?
3852 B_TRUE : B_FALSE;
3853 } else {
3854 err = EINVAL;
3855 }
3856 }
3857 return (err);
3858 }
3859 return (ENOTSUP);
3860 }
3861
3862 static int
3863 e1000g_get_priv_prop(struct e1000g *Adapter, const char *pr_name,
3864 uint_t pr_valsize, void *pr_val)
3865 {
3866 int err = ENOTSUP;
3867 int value;
3868
3869 if (strcmp(pr_name, "_adv_pause_cap") == 0) {
3870 value = Adapter->param_adv_pause;
3871 err = 0;
3872 goto done;
3873 }
3874 if (strcmp(pr_name, "_adv_asym_pause_cap") == 0) {
3875 value = Adapter->param_adv_asym_pause;
3876 err = 0;
3877 goto done;
3878 }
3879 if (strcmp(pr_name, "_tx_bcopy_threshold") == 0) {
3880 value = Adapter->tx_bcopy_thresh;
3881 err = 0;
3882 goto done;
3883 }
3884 if (strcmp(pr_name, "_tx_interrupt_enable") == 0) {
3885 value = Adapter->tx_intr_enable;
3886 err = 0;
3887 goto done;
3888 }
3889 if (strcmp(pr_name, "_tx_intr_delay") == 0) {
3890 value = Adapter->tx_intr_delay;
3891 err = 0;
3892 goto done;
3893 }
3894 if (strcmp(pr_name, "_tx_intr_abs_delay") == 0) {
3895 value = Adapter->tx_intr_abs_delay;
3896 err = 0;
3897 goto done;
3898 }
3899 if (strcmp(pr_name, "_rx_bcopy_threshold") == 0) {
3900 value = Adapter->rx_bcopy_thresh;
3901 err = 0;
3902 goto done;
3903 }
3904 if (strcmp(pr_name, "_max_num_rcv_packets") == 0) {
3905 value = Adapter->rx_limit_onintr;
3906 err = 0;
3907 goto done;
3908 }
3909 if (strcmp(pr_name, "_rx_intr_delay") == 0) {
3910 value = Adapter->rx_intr_delay;
3911 err = 0;
3912 goto done;
3913 }
3914 if (strcmp(pr_name, "_rx_intr_abs_delay") == 0) {
3915 value = Adapter->rx_intr_abs_delay;
3916 err = 0;
3917 goto done;
3918 }
3919 if (strcmp(pr_name, "_intr_throttling_rate") == 0) {
3920 value = Adapter->intr_throttling_rate;
3921 err = 0;
3922 goto done;
3923 }
3924 if (strcmp(pr_name, "_intr_adaptive") == 0) {
3925 value = Adapter->intr_adaptive;
3926 err = 0;
3927 goto done;
3928 }
3929 done:
3930 if (err == 0) {
3931 (void) snprintf(pr_val, pr_valsize, "%d", value);
3932 }
3933 return (err);
3934 }
3935
3936 /*
3937 * e1000g_get_conf - get configurations set in e1000g.conf
3938 * This routine gets user-configured values out of the configuration
3939 * file e1000g.conf.
3940 *
3941 * For each configurable value, there is a minimum, a maximum, and a
3942 * default.
3943 * If user does not configure a value, use the default.
3944 * If user configures below the minimum, use the minumum.
3945 * If user configures above the maximum, use the maxumum.
3946 */
3947 static void
3948 e1000g_get_conf(struct e1000g *Adapter)
3949 {
3950 struct e1000_hw *hw = &Adapter->shared;
3951 boolean_t tbi_compatibility = B_FALSE;
3952 boolean_t is_jumbo = B_FALSE;
3953 int propval;
3954 /*
3955 * decrease the number of descriptors and free packets
3956 * for jumbo frames to reduce tx/rx resource consumption
3957 */
3958 if (Adapter->max_frame_size >= FRAME_SIZE_UPTO_4K) {
3959 is_jumbo = B_TRUE;
3960 }
3961
3962 /*
3963 * get each configurable property from e1000g.conf
3964 */
3965
3966 /*
3967 * NumTxDescriptors
3968 */
3969 Adapter->tx_desc_num_flag =
3970 e1000g_get_prop(Adapter, "NumTxDescriptors",
3971 MIN_NUM_TX_DESCRIPTOR, MAX_NUM_TX_DESCRIPTOR,
3972 is_jumbo ? DEFAULT_JUMBO_NUM_TX_DESC
3973 : DEFAULT_NUM_TX_DESCRIPTOR, &propval);
3974 Adapter->tx_desc_num = propval;
3975
3976 /*
3977 * NumRxDescriptors
3978 */
3979 Adapter->rx_desc_num_flag =
3980 e1000g_get_prop(Adapter, "NumRxDescriptors",
3981 MIN_NUM_RX_DESCRIPTOR, MAX_NUM_RX_DESCRIPTOR,
3982 is_jumbo ? DEFAULT_JUMBO_NUM_RX_DESC
3983 : DEFAULT_NUM_RX_DESCRIPTOR, &propval);
3984 Adapter->rx_desc_num = propval;
3985
3986 /*
3987 * NumRxFreeList
3988 */
3989 Adapter->rx_buf_num_flag =
3990 e1000g_get_prop(Adapter, "NumRxFreeList",
3991 MIN_NUM_RX_FREELIST, MAX_NUM_RX_FREELIST,
3992 is_jumbo ? DEFAULT_JUMBO_NUM_RX_BUF
3993 : DEFAULT_NUM_RX_FREELIST, &propval);
3994 Adapter->rx_freelist_limit = propval;
3995
3996 /*
3997 * NumTxPacketList
3998 */
3999 Adapter->tx_buf_num_flag =
4000 e1000g_get_prop(Adapter, "NumTxPacketList",
4001 MIN_NUM_TX_FREELIST, MAX_NUM_TX_FREELIST,
4002 is_jumbo ? DEFAULT_JUMBO_NUM_TX_BUF
4003 : DEFAULT_NUM_TX_FREELIST, &propval);
4004 Adapter->tx_freelist_num = propval;
4005
4006 /*
4007 * FlowControl
4008 */
4009 hw->fc.send_xon = B_TRUE;
4010 (void) e1000g_get_prop(Adapter, "FlowControl",
4011 e1000_fc_none, 4, DEFAULT_FLOW_CONTROL, &propval);
4012 hw->fc.requested_mode = propval;
4013 /* 4 is the setting that says "let the eeprom decide" */
4014 if (hw->fc.requested_mode == 4)
4015 hw->fc.requested_mode = e1000_fc_default;
4016
4017 /*
4018 * Max Num Receive Packets on Interrupt
4019 */
4020 (void) e1000g_get_prop(Adapter, "MaxNumReceivePackets",
4021 MIN_RX_LIMIT_ON_INTR, MAX_RX_LIMIT_ON_INTR,
4022 DEFAULT_RX_LIMIT_ON_INTR, &propval);
4023 Adapter->rx_limit_onintr = propval;
4024
4025 /*
4026 * PHY master slave setting
4027 */
4028 (void) e1000g_get_prop(Adapter, "SetMasterSlave",
4029 e1000_ms_hw_default, e1000_ms_auto,
4030 e1000_ms_hw_default, &propval);
4031 hw->phy.ms_type = propval;
4032
4033 /*
4034 * Parameter which controls TBI mode workaround, which is only
4035 * needed on certain switches such as Cisco 6500/Foundry
4036 */
4037 (void) e1000g_get_prop(Adapter, "TbiCompatibilityEnable",
4038 0, 1, DEFAULT_TBI_COMPAT_ENABLE, &propval);
4039 tbi_compatibility = (propval == 1);
4040 e1000_set_tbi_compatibility_82543(hw, tbi_compatibility);
4041
4042 /*
4043 * MSI Enable
4044 */
4045 (void) e1000g_get_prop(Adapter, "MSIEnable",
4046 0, 1, DEFAULT_MSI_ENABLE, &propval);
4047 Adapter->msi_enable = (propval == 1);
4048
4049 /*
4050 * Interrupt Throttling Rate
4051 */
4052 (void) e1000g_get_prop(Adapter, "intr_throttling_rate",
4053 MIN_INTR_THROTTLING, MAX_INTR_THROTTLING,
4054 DEFAULT_INTR_THROTTLING, &propval);
4055 Adapter->intr_throttling_rate = propval;
4056
4057 /*
4058 * Adaptive Interrupt Blanking Enable/Disable
4059 * It is enabled by default
4060 */
4061 (void) e1000g_get_prop(Adapter, "intr_adaptive", 0, 1, 1,
4062 &propval);
4063 Adapter->intr_adaptive = (propval == 1);
4064
4065 /*
4066 * Hardware checksum enable/disable parameter
4067 */
4068 (void) e1000g_get_prop(Adapter, "tx_hcksum_enable",
4069 0, 1, DEFAULT_TX_HCKSUM_ENABLE, &propval);
4070 Adapter->tx_hcksum_enable = (propval == 1);
4071 /*
4072 * Checksum on/off selection via global parameters.
4073 *
4074 * If the chip is flagged as not capable of (correctly)
4075 * handling checksumming, we don't enable it on either
4076 * Rx or Tx side. Otherwise, we take this chip's settings
4077 * from the patchable global defaults.
4078 *
4079 * We advertise our capabilities only if TX offload is
4080 * enabled. On receive, the stack will accept checksummed
4081 * packets anyway, even if we haven't said we can deliver
4082 * them.
4083 */
4084 switch (hw->mac.type) {
4085 case e1000_82540:
4086 case e1000_82544:
4087 case e1000_82545:
4088 case e1000_82545_rev_3:
4089 case e1000_82546:
4090 case e1000_82546_rev_3:
4091 case e1000_82571:
4092 case e1000_82572:
4093 case e1000_82573:
4094 case e1000_80003es2lan:
4095 break;
4096 /*
4097 * For the following Intel PRO/1000 chipsets, we have not
4098 * tested the hardware checksum offload capability, so we
4099 * disable the capability for them.
4100 * e1000_82542,
4101 * e1000_82543,
4102 * e1000_82541,
4103 * e1000_82541_rev_2,
4104 * e1000_82547,
4105 * e1000_82547_rev_2,
4106 */
4107 default:
4108 Adapter->tx_hcksum_enable = B_FALSE;
4109 }
4110
4111 /*
4112 * Large Send Offloading(LSO) Enable/Disable
4113 * If the tx hardware checksum is not enabled, LSO should be
4114 * disabled.
4115 */
4116 (void) e1000g_get_prop(Adapter, "lso_enable",
4117 0, 1, DEFAULT_LSO_ENABLE, &propval);
4118 Adapter->lso_enable = (propval == 1);
4119
4120 switch (hw->mac.type) {
4121 case e1000_82546:
4122 case e1000_82546_rev_3:
4123 if (Adapter->lso_enable)
4124 Adapter->lso_premature_issue = B_TRUE;
4125 /* FALLTHRU */
4126 case e1000_82571:
4127 case e1000_82572:
4128 case e1000_82573:
4129 case e1000_80003es2lan:
4130 break;
4131 default:
4132 Adapter->lso_enable = B_FALSE;
4133 }
4134
4135 if (!Adapter->tx_hcksum_enable) {
4136 Adapter->lso_premature_issue = B_FALSE;
4137 Adapter->lso_enable = B_FALSE;
4138 }
4139
4140 /*
4141 * If mem_workaround_82546 is enabled, the rx buffer allocated by
4142 * e1000_82545, e1000_82546 and e1000_82546_rev_3
4143 * will not cross 64k boundary.
4144 */
4145 (void) e1000g_get_prop(Adapter, "mem_workaround_82546",
4146 0, 1, DEFAULT_MEM_WORKAROUND_82546, &propval);
4147 Adapter->mem_workaround_82546 = (propval == 1);
4148
4149 /*
4150 * Max number of multicast addresses
4151 */
4152 (void) e1000g_get_prop(Adapter, "mcast_max_num",
4153 MIN_MCAST_NUM, MAX_MCAST_NUM, hw->mac.mta_reg_count * 32,
4154 &propval);
4155 Adapter->mcast_max_num = propval;
4156 }
4157
4158 /*
4159 * e1000g_get_prop - routine to read properties
4160 *
4161 * Get a user-configure property value out of the configuration
4162 * file e1000g.conf.
4163 *
4164 * Caller provides name of the property, a default value, a minimum
4165 * value, a maximum value and a pointer to the returned property
4166 * value.
4167 *
4168 * Return B_TRUE if the configured value of the property is not a default
4169 * value, otherwise return B_FALSE.
4170 */
4171 static boolean_t
4172 e1000g_get_prop(struct e1000g *Adapter, /* point to per-adapter structure */
4173 char *propname, /* name of the property */
4174 int minval, /* minimum acceptable value */
4175 int maxval, /* maximim acceptable value */
4176 int defval, /* default value */
4177 int *propvalue) /* property value return to caller */
4178 {
4179 int propval; /* value returned for requested property */
4180 int *props; /* point to array of properties returned */
4181 uint_t nprops; /* number of property value returned */
4182 boolean_t ret = B_TRUE;
4183
4184 /*
4185 * get the array of properties from the config file
4186 */
4187 if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, Adapter->dip,
4188 DDI_PROP_DONTPASS, propname, &props, &nprops) == DDI_PROP_SUCCESS) {
4189 /* got some properties, test if we got enough */
4190 if (Adapter->instance < nprops) {
4191 propval = props[Adapter->instance];
4192 } else {
4193 /* not enough properties configured */
4194 propval = defval;
4195 E1000G_DEBUGLOG_2(Adapter, E1000G_INFO_LEVEL,
4196 "Not Enough %s values found in e1000g.conf"
4197 " - set to %d\n",
4198 propname, propval);
4199 ret = B_FALSE;
4200 }
4201
4202 /* free memory allocated for properties */
4203 ddi_prop_free(props);
4204
4205 } else {
4206 propval = defval;
4207 ret = B_FALSE;
4208 }
4209
4210 /*
4211 * enforce limits
4212 */
4213 if (propval > maxval) {
4214 propval = maxval;
4215 E1000G_DEBUGLOG_2(Adapter, E1000G_INFO_LEVEL,
4216 "Too High %s value in e1000g.conf - set to %d\n",
4217 propname, propval);
4218 }
4219
4220 if (propval < minval) {
4221 propval = minval;
4222 E1000G_DEBUGLOG_2(Adapter, E1000G_INFO_LEVEL,
4223 "Too Low %s value in e1000g.conf - set to %d\n",
4224 propname, propval);
4225 }
4226
4227 *propvalue = propval;
4228 return (ret);
4229 }
4230
4231 static boolean_t
4232 e1000g_link_check(struct e1000g *Adapter)
4233 {
4234 uint16_t speed, duplex, phydata;
4235 boolean_t link_changed = B_FALSE;
4236 struct e1000_hw *hw;
4237 uint32_t reg_tarc;
4238
4239 hw = &Adapter->shared;
4240
4241 if (e1000g_link_up(Adapter)) {
4242 /*
4243 * The Link is up, check whether it was marked as down earlier
4244 */
4245 if (Adapter->link_state != LINK_STATE_UP) {
4246 (void) e1000_get_speed_and_duplex(hw, &speed, &duplex);
4247 Adapter->link_speed = speed;
4248 Adapter->link_duplex = duplex;
4249 Adapter->link_state = LINK_STATE_UP;
4250 link_changed = B_TRUE;
4251
4252 if (Adapter->link_speed == SPEED_1000)
4253 Adapter->stall_threshold = TX_STALL_TIME_2S;
4254 else
4255 Adapter->stall_threshold = TX_STALL_TIME_8S;
4256
4257 Adapter->tx_link_down_timeout = 0;
4258
4259 if ((hw->mac.type == e1000_82571) ||
4260 (hw->mac.type == e1000_82572)) {
4261 reg_tarc = E1000_READ_REG(hw, E1000_TARC(0));
4262 if (speed == SPEED_1000)
4263 reg_tarc |= (1 << 21);
4264 else
4265 reg_tarc &= ~(1 << 21);
4266 E1000_WRITE_REG(hw, E1000_TARC(0), reg_tarc);
4267 }
4268 }
4269 Adapter->smartspeed = 0;
4270 } else {
4271 if (Adapter->link_state != LINK_STATE_DOWN) {
4272 Adapter->link_speed = 0;
4273 Adapter->link_duplex = 0;
4274 Adapter->link_state = LINK_STATE_DOWN;
4275 link_changed = B_TRUE;
4276
4277 /*
4278 * SmartSpeed workaround for Tabor/TanaX, When the
4279 * driver loses link disable auto master/slave
4280 * resolution.
4281 */
4282 if (hw->phy.type == e1000_phy_igp) {
4283 (void) e1000_read_phy_reg(hw,
4284 PHY_1000T_CTRL, &phydata);
4285 phydata |= CR_1000T_MS_ENABLE;
4286 (void) e1000_write_phy_reg(hw,
4287 PHY_1000T_CTRL, phydata);
4288 }
4289 } else {
4290 e1000g_smartspeed(Adapter);
4291 }
4292
4293 if (Adapter->e1000g_state & E1000G_STARTED) {
4294 if (Adapter->tx_link_down_timeout <
4295 MAX_TX_LINK_DOWN_TIMEOUT) {
4296 Adapter->tx_link_down_timeout++;
4297 } else if (Adapter->tx_link_down_timeout ==
4298 MAX_TX_LINK_DOWN_TIMEOUT) {
4299 e1000g_tx_clean(Adapter);
4300 Adapter->tx_link_down_timeout++;
4301 }
4302 }
4303 }
4304
4305 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK)
4306 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_DEGRADED);
4307
4308 return (link_changed);
4309 }
4310
4311 /*
4312 * e1000g_reset_link - Using the link properties to setup the link
4313 */
4314 int
4315 e1000g_reset_link(struct e1000g *Adapter)
4316 {
4317 struct e1000_mac_info *mac;
4318 struct e1000_phy_info *phy;
4319 struct e1000_hw *hw;
4320 boolean_t invalid;
4321
4322 mac = &Adapter->shared.mac;
4323 phy = &Adapter->shared.phy;
4324 hw = &Adapter->shared;
4325 invalid = B_FALSE;
4326
4327 if (hw->phy.media_type != e1000_media_type_copper)
4328 goto out;
4329
4330 if (Adapter->param_adv_autoneg == 1) {
4331 mac->autoneg = B_TRUE;
4332 phy->autoneg_advertised = 0;
4333
4334 /*
4335 * 1000hdx is not supported for autonegotiation
4336 */
4337 if (Adapter->param_adv_1000fdx == 1)
4338 phy->autoneg_advertised |= ADVERTISE_1000_FULL;
4339
4340 if (Adapter->param_adv_100fdx == 1)
4341 phy->autoneg_advertised |= ADVERTISE_100_FULL;
4342
4343 if (Adapter->param_adv_100hdx == 1)
4344 phy->autoneg_advertised |= ADVERTISE_100_HALF;
4345
4346 if (Adapter->param_adv_10fdx == 1)
4347 phy->autoneg_advertised |= ADVERTISE_10_FULL;
4348
4349 if (Adapter->param_adv_10hdx == 1)
4350 phy->autoneg_advertised |= ADVERTISE_10_HALF;
4351
4352 if (phy->autoneg_advertised == 0)
4353 invalid = B_TRUE;
4354 } else {
4355 mac->autoneg = B_FALSE;
4356
4357 /*
4358 * For Intel copper cards, 1000fdx and 1000hdx are not
4359 * supported for forced link
4360 */
4361 if (Adapter->param_adv_100fdx == 1)
4362 mac->forced_speed_duplex = ADVERTISE_100_FULL;
4363 else if (Adapter->param_adv_100hdx == 1)
4364 mac->forced_speed_duplex = ADVERTISE_100_HALF;
4365 else if (Adapter->param_adv_10fdx == 1)
4366 mac->forced_speed_duplex = ADVERTISE_10_FULL;
4367 else if (Adapter->param_adv_10hdx == 1)
4368 mac->forced_speed_duplex = ADVERTISE_10_HALF;
4369 else
4370 invalid = B_TRUE;
4371
4372 }
4373
4374 if (invalid) {
4375 e1000g_log(Adapter, CE_WARN,
4376 "Invalid link settings. Setup link to "
4377 "support autonegotiation with all link capabilities.");
4378 mac->autoneg = B_TRUE;
4379 phy->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
4380 }
4381
4382 out:
4383 return (e1000_setup_link(&Adapter->shared));
4384 }
4385
4386 static void
4387 e1000g_timer_tx_resched(struct e1000g *Adapter)
4388 {
4389 e1000g_tx_ring_t *tx_ring = Adapter->tx_ring;
4390
4391 rw_enter(&Adapter->chip_lock, RW_READER);
4392
4393 if (tx_ring->resched_needed &&
4394 ((ddi_get_lbolt() - tx_ring->resched_timestamp) >
4395 drv_usectohz(1000000)) &&
4396 (Adapter->e1000g_state & E1000G_STARTED) &&
4397 (tx_ring->tbd_avail >= DEFAULT_TX_NO_RESOURCE)) {
4398 tx_ring->resched_needed = B_FALSE;
4399 mac_tx_update(Adapter->mh);
4400 E1000G_STAT(tx_ring->stat_reschedule);
4401 E1000G_STAT(tx_ring->stat_timer_reschedule);
4402 }
4403
4404 rw_exit(&Adapter->chip_lock);
4405 }
4406
4407 static void
4408 e1000g_local_timer(void *ws)
4409 {
4410 struct e1000g *Adapter = (struct e1000g *)ws;
4411 struct e1000_hw *hw;
4412 e1000g_ether_addr_t ether_addr;
4413 boolean_t link_changed;
4414
4415 hw = &Adapter->shared;
4416
4417 if (Adapter->e1000g_state & E1000G_ERROR) {
4418 rw_enter(&Adapter->chip_lock, RW_WRITER);
4419 Adapter->e1000g_state &= ~E1000G_ERROR;
4420 rw_exit(&Adapter->chip_lock);
4421
4422 Adapter->reset_count++;
4423 if (e1000g_global_reset(Adapter)) {
4424 ddi_fm_service_impact(Adapter->dip,
4425 DDI_SERVICE_RESTORED);
4426 e1000g_timer_tx_resched(Adapter);
4427 } else
4428 ddi_fm_service_impact(Adapter->dip,
4429 DDI_SERVICE_LOST);
4430 return;
4431 }
4432
4433 if (e1000g_stall_check(Adapter)) {
4434 E1000G_DEBUGLOG_0(Adapter, E1000G_INFO_LEVEL,
4435 "Tx stall detected. Activate automatic recovery.\n");
4436 e1000g_fm_ereport(Adapter, DDI_FM_DEVICE_STALL);
4437 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_LOST);
4438 Adapter->reset_count++;
4439 if (e1000g_reset_adapter(Adapter)) {
4440 ddi_fm_service_impact(Adapter->dip,
4441 DDI_SERVICE_RESTORED);
4442 e1000g_timer_tx_resched(Adapter);
4443 }
4444 return;
4445 }
4446
4447 link_changed = B_FALSE;
4448 rw_enter(&Adapter->chip_lock, RW_READER);
4449 if (Adapter->link_complete)
4450 link_changed = e1000g_link_check(Adapter);
4451 rw_exit(&Adapter->chip_lock);
4452
4453 if (link_changed) {
4454 if (!Adapter->reset_flag &&
4455 (Adapter->e1000g_state & E1000G_STARTED) &&
4456 !(Adapter->e1000g_state & E1000G_SUSPENDED))
4457 mac_link_update(Adapter->mh, Adapter->link_state);
4458 if (Adapter->link_state == LINK_STATE_UP)
4459 Adapter->reset_flag = B_FALSE;
4460 }
4461 /*
4462 * Workaround for esb2. Data stuck in fifo on a link
4463 * down event. Reset the adapter to recover it.
4464 */
4465 if (Adapter->esb2_workaround) {
4466 Adapter->esb2_workaround = B_FALSE;
4467 (void) e1000g_reset_adapter(Adapter);
4468 return;
4469 }
4470
4471 /*
4472 * With 82571 controllers, any locally administered address will
4473 * be overwritten when there is a reset on the other port.
4474 * Detect this circumstance and correct it.
4475 */
4476 if ((hw->mac.type == e1000_82571) &&
4477 (e1000_get_laa_state_82571(hw) == B_TRUE)) {
4478 ether_addr.reg.low = E1000_READ_REG_ARRAY(hw, E1000_RA, 0);
4479 ether_addr.reg.high = E1000_READ_REG_ARRAY(hw, E1000_RA, 1);
4480
4481 ether_addr.reg.low = ntohl(ether_addr.reg.low);
4482 ether_addr.reg.high = ntohl(ether_addr.reg.high);
4483
4484 if ((ether_addr.mac.addr[5] != hw->mac.addr[0]) ||
4485 (ether_addr.mac.addr[4] != hw->mac.addr[1]) ||
4486 (ether_addr.mac.addr[3] != hw->mac.addr[2]) ||
4487 (ether_addr.mac.addr[2] != hw->mac.addr[3]) ||
4488 (ether_addr.mac.addr[1] != hw->mac.addr[4]) ||
4489 (ether_addr.mac.addr[0] != hw->mac.addr[5])) {
4490 (void) e1000_rar_set(hw, hw->mac.addr, 0);
4491 }
4492 }
4493
4494 /*
4495 * Long TTL workaround for 82541/82547
4496 */
4497 (void) e1000_igp_ttl_workaround_82547(hw);
4498
4499 /*
4500 * Check for Adaptive IFS settings If there are lots of collisions
4501 * change the value in steps...
4502 * These properties should only be set for 10/100
4503 */
4504 if ((hw->phy.media_type == e1000_media_type_copper) &&
4505 ((Adapter->link_speed == SPEED_100) ||
4506 (Adapter->link_speed == SPEED_10))) {
4507 e1000_update_adaptive(hw);
4508 }
4509 /*
4510 * Set Timer Interrupts
4511 */
4512 E1000_WRITE_REG(hw, E1000_ICS, E1000_IMS_RXT0);
4513
4514 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK)
4515 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_DEGRADED);
4516 else
4517 e1000g_timer_tx_resched(Adapter);
4518
4519 restart_watchdog_timer(Adapter);
4520 }
4521
4522 /*
4523 * The function e1000g_link_timer() is called when the timer for link setup
4524 * is expired, which indicates the completion of the link setup. The link
4525 * state will not be updated until the link setup is completed. And the
4526 * link state will not be sent to the upper layer through mac_link_update()
4527 * in this function. It will be updated in the local timer routine or the
4528 * interrupt service routine after the interface is started (plumbed).
4529 */
4530 static void
4531 e1000g_link_timer(void *arg)
4532 {
4533 struct e1000g *Adapter = (struct e1000g *)arg;
4534
4535 mutex_enter(&Adapter->link_lock);
4536 Adapter->link_complete = B_TRUE;
4537 Adapter->link_tid = 0;
4538 mutex_exit(&Adapter->link_lock);
4539 }
4540
4541 /*
4542 * e1000g_force_speed_duplex - read forced speed/duplex out of e1000g.conf
4543 *
4544 * This function read the forced speed and duplex for 10/100 Mbps speeds
4545 * and also for 1000 Mbps speeds from the e1000g.conf file
4546 */
4547 static void
4548 e1000g_force_speed_duplex(struct e1000g *Adapter)
4549 {
4550 int forced;
4551 int propval;
4552 struct e1000_mac_info *mac = &Adapter->shared.mac;
4553 struct e1000_phy_info *phy = &Adapter->shared.phy;
4554
4555 /*
4556 * get value out of config file
4557 */
4558 (void) e1000g_get_prop(Adapter, "ForceSpeedDuplex",
4559 GDIAG_10_HALF, GDIAG_ANY, GDIAG_ANY, &forced);
4560
4561 switch (forced) {
4562 case GDIAG_10_HALF:
4563 /*
4564 * Disable Auto Negotiation
4565 */
4566 mac->autoneg = B_FALSE;
4567 mac->forced_speed_duplex = ADVERTISE_10_HALF;
4568 break;
4569 case GDIAG_10_FULL:
4570 /*
4571 * Disable Auto Negotiation
4572 */
4573 mac->autoneg = B_FALSE;
4574 mac->forced_speed_duplex = ADVERTISE_10_FULL;
4575 break;
4576 case GDIAG_100_HALF:
4577 /*
4578 * Disable Auto Negotiation
4579 */
4580 mac->autoneg = B_FALSE;
4581 mac->forced_speed_duplex = ADVERTISE_100_HALF;
4582 break;
4583 case GDIAG_100_FULL:
4584 /*
4585 * Disable Auto Negotiation
4586 */
4587 mac->autoneg = B_FALSE;
4588 mac->forced_speed_duplex = ADVERTISE_100_FULL;
4589 break;
4590 case GDIAG_1000_FULL:
4591 /*
4592 * The gigabit spec requires autonegotiation. Therefore,
4593 * when the user wants to force the speed to 1000Mbps, we
4594 * enable AutoNeg, but only allow the harware to advertise
4595 * 1000Mbps. This is different from 10/100 operation, where
4596 * we are allowed to link without any negotiation.
4597 */
4598 mac->autoneg = B_TRUE;
4599 phy->autoneg_advertised = ADVERTISE_1000_FULL;
4600 break;
4601 default: /* obey the setting of AutoNegAdvertised */
4602 mac->autoneg = B_TRUE;
4603 (void) e1000g_get_prop(Adapter, "AutoNegAdvertised",
4604 0, AUTONEG_ADVERTISE_SPEED_DEFAULT,
4605 AUTONEG_ADVERTISE_SPEED_DEFAULT, &propval);
4606 phy->autoneg_advertised = (uint16_t)propval;
4607 break;
4608 } /* switch */
4609 }
4610
4611 /*
4612 * e1000g_get_max_frame_size - get jumbo frame setting from e1000g.conf
4613 *
4614 * This function reads MaxFrameSize from e1000g.conf
4615 */
4616 static void
4617 e1000g_get_max_frame_size(struct e1000g *Adapter)
4618 {
4619 int max_frame;
4620
4621 /*
4622 * get value out of config file
4623 */
4624 (void) e1000g_get_prop(Adapter, "MaxFrameSize", 0, 3, 0,
4625 &max_frame);
4626
4627 switch (max_frame) {
4628 case 0:
4629 Adapter->default_mtu = ETHERMTU;
4630 break;
4631 case 1:
4632 Adapter->default_mtu = FRAME_SIZE_UPTO_4K -
4633 sizeof (struct ether_vlan_header) - ETHERFCSL;
4634 break;
4635 case 2:
4636 Adapter->default_mtu = FRAME_SIZE_UPTO_8K -
4637 sizeof (struct ether_vlan_header) - ETHERFCSL;
4638 break;
4639 case 3:
4640 Adapter->default_mtu = FRAME_SIZE_UPTO_16K -
4641 sizeof (struct ether_vlan_header) - ETHERFCSL;
4642 break;
4643 default:
4644 Adapter->default_mtu = ETHERMTU;
4645 break;
4646 } /* switch */
4647
4648 /*
4649 * If the user configed MTU is larger than the deivce's maximum MTU,
4650 * the MTU is set to the deivce's maximum value.
4651 */
4652 if (Adapter->default_mtu > Adapter->max_mtu)
4653 Adapter->default_mtu = Adapter->max_mtu;
4654
4655 Adapter->max_frame_size = e1000g_mtu2maxframe(Adapter->default_mtu);
4656 }
4657
4658 /*
4659 * e1000g_pch_limits - Apply limits of the PCH silicon type
4660 *
4661 * At any frame size larger than the ethernet default,
4662 * prevent linking at 10/100 speeds.
4663 */
4664 static void
4665 e1000g_pch_limits(struct e1000g *Adapter)
4666 {
4667 struct e1000_hw *hw = &Adapter->shared;
4668
4669 /* only applies to PCH silicon type */
4670 if (hw->mac.type != e1000_pchlan && hw->mac.type != e1000_pch2lan)
4671 return;
4672
4673 /* only applies to frames larger than ethernet default */
4674 if (Adapter->max_frame_size > DEFAULT_FRAME_SIZE) {
4675 hw->mac.autoneg = B_TRUE;
4676 hw->phy.autoneg_advertised = ADVERTISE_1000_FULL;
4677
4678 Adapter->param_adv_autoneg = 1;
4679 Adapter->param_adv_1000fdx = 1;
4680
4681 Adapter->param_adv_100fdx = 0;
4682 Adapter->param_adv_100hdx = 0;
4683 Adapter->param_adv_10fdx = 0;
4684 Adapter->param_adv_10hdx = 0;
4685
4686 e1000g_param_sync(Adapter);
4687 }
4688 }
4689
4690 /*
4691 * e1000g_mtu2maxframe - convert given MTU to maximum frame size
4692 */
4693 static uint32_t
4694 e1000g_mtu2maxframe(uint32_t mtu)
4695 {
4696 uint32_t maxframe;
4697
4698 maxframe = mtu + sizeof (struct ether_vlan_header) + ETHERFCSL;
4699
4700 return (maxframe);
4701 }
4702
4703 static void
4704 arm_watchdog_timer(struct e1000g *Adapter)
4705 {
4706 Adapter->watchdog_tid =
4707 timeout(e1000g_local_timer,
4708 (void *)Adapter, 1 * drv_usectohz(1000000));
4709 }
4710 #pragma inline(arm_watchdog_timer)
4711
4712 static void
4713 enable_watchdog_timer(struct e1000g *Adapter)
4714 {
4715 mutex_enter(&Adapter->watchdog_lock);
4716
4717 if (!Adapter->watchdog_timer_enabled) {
4718 Adapter->watchdog_timer_enabled = B_TRUE;
4719 Adapter->watchdog_timer_started = B_TRUE;
4720 arm_watchdog_timer(Adapter);
4721 }
4722
4723 mutex_exit(&Adapter->watchdog_lock);
4724 }
4725
4726 static void
4727 disable_watchdog_timer(struct e1000g *Adapter)
4728 {
4729 timeout_id_t tid;
4730
4731 mutex_enter(&Adapter->watchdog_lock);
4732
4733 Adapter->watchdog_timer_enabled = B_FALSE;
4734 Adapter->watchdog_timer_started = B_FALSE;
4735 tid = Adapter->watchdog_tid;
4736 Adapter->watchdog_tid = 0;
4737
4738 mutex_exit(&Adapter->watchdog_lock);
4739
4740 if (tid != 0)
4741 (void) untimeout(tid);
4742 }
4743
4744 static void
4745 start_watchdog_timer(struct e1000g *Adapter)
4746 {
4747 mutex_enter(&Adapter->watchdog_lock);
4748
4749 if (Adapter->watchdog_timer_enabled) {
4750 if (!Adapter->watchdog_timer_started) {
4751 Adapter->watchdog_timer_started = B_TRUE;
4752 arm_watchdog_timer(Adapter);
4753 }
4754 }
4755
4756 mutex_exit(&Adapter->watchdog_lock);
4757 }
4758
4759 static void
4760 restart_watchdog_timer(struct e1000g *Adapter)
4761 {
4762 mutex_enter(&Adapter->watchdog_lock);
4763
4764 if (Adapter->watchdog_timer_started)
4765 arm_watchdog_timer(Adapter);
4766
4767 mutex_exit(&Adapter->watchdog_lock);
4768 }
4769
4770 static void
4771 stop_watchdog_timer(struct e1000g *Adapter)
4772 {
4773 timeout_id_t tid;
4774
4775 mutex_enter(&Adapter->watchdog_lock);
4776
4777 Adapter->watchdog_timer_started = B_FALSE;
4778 tid = Adapter->watchdog_tid;
4779 Adapter->watchdog_tid = 0;
4780
4781 mutex_exit(&Adapter->watchdog_lock);
4782
4783 if (tid != 0)
4784 (void) untimeout(tid);
4785 }
4786
4787 static void
4788 stop_link_timer(struct e1000g *Adapter)
4789 {
4790 timeout_id_t tid;
4791
4792 /* Disable the link timer */
4793 mutex_enter(&Adapter->link_lock);
4794
4795 tid = Adapter->link_tid;
4796 Adapter->link_tid = 0;
4797
4798 mutex_exit(&Adapter->link_lock);
4799
4800 if (tid != 0)
4801 (void) untimeout(tid);
4802 }
4803
4804 static void
4805 stop_82547_timer(e1000g_tx_ring_t *tx_ring)
4806 {
4807 timeout_id_t tid;
4808
4809 /* Disable the tx timer for 82547 chipset */
4810 mutex_enter(&tx_ring->tx_lock);
4811
4812 tx_ring->timer_enable_82547 = B_FALSE;
4813 tid = tx_ring->timer_id_82547;
4814 tx_ring->timer_id_82547 = 0;
4815
4816 mutex_exit(&tx_ring->tx_lock);
4817
4818 if (tid != 0)
4819 (void) untimeout(tid);
4820 }
4821
4822 void
4823 e1000g_clear_interrupt(struct e1000g *Adapter)
4824 {
4825 E1000_WRITE_REG(&Adapter->shared, E1000_IMC,
4826 0xffffffff & ~E1000_IMS_RXSEQ);
4827 }
4828
4829 void
4830 e1000g_mask_interrupt(struct e1000g *Adapter)
4831 {
4832 E1000_WRITE_REG(&Adapter->shared, E1000_IMS,
4833 IMS_ENABLE_MASK & ~E1000_IMS_TXDW);
4834
4835 if (Adapter->tx_intr_enable)
4836 e1000g_mask_tx_interrupt(Adapter);
4837 }
4838
4839 /*
4840 * This routine is called by e1000g_quiesce(), therefore must not block.
4841 */
4842 void
4843 e1000g_clear_all_interrupts(struct e1000g *Adapter)
4844 {
4845 E1000_WRITE_REG(&Adapter->shared, E1000_IMC, 0xffffffff);
4846 }
4847
4848 void
4849 e1000g_mask_tx_interrupt(struct e1000g *Adapter)
4850 {
4851 E1000_WRITE_REG(&Adapter->shared, E1000_IMS, E1000_IMS_TXDW);
4852 }
4853
4854 void
4855 e1000g_clear_tx_interrupt(struct e1000g *Adapter)
4856 {
4857 E1000_WRITE_REG(&Adapter->shared, E1000_IMC, E1000_IMS_TXDW);
4858 }
4859
4860 static void
4861 e1000g_smartspeed(struct e1000g *Adapter)
4862 {
4863 struct e1000_hw *hw = &Adapter->shared;
4864 uint16_t phy_status;
4865 uint16_t phy_ctrl;
4866
4867 /*
4868 * If we're not T-or-T, or we're not autoneg'ing, or we're not
4869 * advertising 1000Full, we don't even use the workaround
4870 */
4871 if ((hw->phy.type != e1000_phy_igp) ||
4872 !hw->mac.autoneg ||
4873 !(hw->phy.autoneg_advertised & ADVERTISE_1000_FULL))
4874 return;
4875
4876 /*
4877 * True if this is the first call of this function or after every
4878 * 30 seconds of not having link
4879 */
4880 if (Adapter->smartspeed == 0) {
4881 /*
4882 * If Master/Slave config fault is asserted twice, we
4883 * assume back-to-back
4884 */
4885 (void) e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
4886 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT))
4887 return;
4888
4889 (void) e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
4890 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT))
4891 return;
4892 /*
4893 * We're assuming back-2-back because our status register
4894 * insists! there's a fault in the master/slave
4895 * relationship that was "negotiated"
4896 */
4897 (void) e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
4898 /*
4899 * Is the phy configured for manual configuration of
4900 * master/slave?
4901 */
4902 if (phy_ctrl & CR_1000T_MS_ENABLE) {
4903 /*
4904 * Yes. Then disable manual configuration (enable
4905 * auto configuration) of master/slave
4906 */
4907 phy_ctrl &= ~CR_1000T_MS_ENABLE;
4908 (void) e1000_write_phy_reg(hw,
4909 PHY_1000T_CTRL, phy_ctrl);
4910 /*
4911 * Effectively starting the clock
4912 */
4913 Adapter->smartspeed++;
4914 /*
4915 * Restart autonegotiation
4916 */
4917 if (!e1000_phy_setup_autoneg(hw) &&
4918 !e1000_read_phy_reg(hw, PHY_CONTROL, &phy_ctrl)) {
4919 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4920 MII_CR_RESTART_AUTO_NEG);
4921 (void) e1000_write_phy_reg(hw,
4922 PHY_CONTROL, phy_ctrl);
4923 }
4924 }
4925 return;
4926 /*
4927 * Has 6 seconds transpired still without link? Remember,
4928 * you should reset the smartspeed counter once you obtain
4929 * link
4930 */
4931 } else if (Adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
4932 /*
4933 * Yes. Remember, we did at the start determine that
4934 * there's a master/slave configuration fault, so we're
4935 * still assuming there's someone on the other end, but we
4936 * just haven't yet been able to talk to it. We then
4937 * re-enable auto configuration of master/slave to see if
4938 * we're running 2/3 pair cables.
4939 */
4940 /*
4941 * If still no link, perhaps using 2/3 pair cable
4942 */
4943 (void) e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
4944 phy_ctrl |= CR_1000T_MS_ENABLE;
4945 (void) e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
4946 /*
4947 * Restart autoneg with phy enabled for manual
4948 * configuration of master/slave
4949 */
4950 if (!e1000_phy_setup_autoneg(hw) &&
4951 !e1000_read_phy_reg(hw, PHY_CONTROL, &phy_ctrl)) {
4952 phy_ctrl |=
4953 (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
4954 (void) e1000_write_phy_reg(hw, PHY_CONTROL, phy_ctrl);
4955 }
4956 /*
4957 * Hopefully, there are no more faults and we've obtained
4958 * link as a result.
4959 */
4960 }
4961 /*
4962 * Restart process after E1000_SMARTSPEED_MAX iterations (30
4963 * seconds)
4964 */
4965 if (Adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
4966 Adapter->smartspeed = 0;
4967 }
4968
4969 static boolean_t
4970 is_valid_mac_addr(uint8_t *mac_addr)
4971 {
4972 const uint8_t addr_test1[6] = { 0, 0, 0, 0, 0, 0 };
4973 const uint8_t addr_test2[6] =
4974 { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
4975
4976 if (!(bcmp(addr_test1, mac_addr, ETHERADDRL)) ||
4977 !(bcmp(addr_test2, mac_addr, ETHERADDRL)))
4978 return (B_FALSE);
4979
4980 return (B_TRUE);
4981 }
4982
4983 /*
4984 * e1000g_stall_check - check for tx stall
4985 *
4986 * This function checks if the adapter is stalled (in transmit).
4987 *
4988 * It is called each time the watchdog timeout is invoked.
4989 * If the transmit descriptor reclaim continuously fails,
4990 * the watchdog value will increment by 1. If the watchdog
4991 * value exceeds the threshold, the adapter is assumed to
4992 * have stalled and need to be reset.
4993 */
4994 static boolean_t
4995 e1000g_stall_check(struct e1000g *Adapter)
4996 {
4997 e1000g_tx_ring_t *tx_ring;
4998
4999 tx_ring = Adapter->tx_ring;
5000
5001 if (Adapter->link_state != LINK_STATE_UP)
5002 return (B_FALSE);
5003
5004 (void) e1000g_recycle(tx_ring);
5005
5006 if (Adapter->stall_flag)
5007 return (B_TRUE);
5008
5009 return (B_FALSE);
5010 }
5011
5012 #ifdef E1000G_DEBUG
5013 static enum ioc_reply
5014 e1000g_pp_ioctl(struct e1000g *e1000gp, struct iocblk *iocp, mblk_t *mp)
5015 {
5016 void (*ppfn)(struct e1000g *e1000gp, e1000g_peekpoke_t *ppd);
5017 e1000g_peekpoke_t *ppd;
5018 uint64_t mem_va;
5019 uint64_t maxoff;
5020 boolean_t peek;
5021
5022 switch (iocp->ioc_cmd) {
5023
5024 case E1000G_IOC_REG_PEEK:
5025 peek = B_TRUE;
5026 break;
5027
5028 case E1000G_IOC_REG_POKE:
5029 peek = B_FALSE;
5030 break;
5031
5032 deault:
5033 E1000G_DEBUGLOG_1(e1000gp, E1000G_INFO_LEVEL,
5034 "e1000g_diag_ioctl: invalid ioctl command 0x%X\n",
5035 iocp->ioc_cmd);
5036 return (IOC_INVAL);
5037 }
5038
5039 /*
5040 * Validate format of ioctl
5041 */
5042 if (iocp->ioc_count != sizeof (e1000g_peekpoke_t))
5043 return (IOC_INVAL);
5044 if (mp->b_cont == NULL)
5045 return (IOC_INVAL);
5046
5047 ppd = (e1000g_peekpoke_t *)(uintptr_t)mp->b_cont->b_rptr;
5048
5049 /*
5050 * Validate request parameters
5051 */
5052 switch (ppd->pp_acc_space) {
5053
5054 default:
5055 E1000G_DEBUGLOG_1(e1000gp, E1000G_INFO_LEVEL,
5056 "e1000g_diag_ioctl: invalid access space 0x%X\n",
5057 ppd->pp_acc_space);
5058 return (IOC_INVAL);
5059
5060 case E1000G_PP_SPACE_REG:
5061 /*
5062 * Memory-mapped I/O space
5063 */
5064 ASSERT(ppd->pp_acc_size == 4);
5065 if (ppd->pp_acc_size != 4)
5066 return (IOC_INVAL);
5067
5068 if ((ppd->pp_acc_offset % ppd->pp_acc_size) != 0)
5069 return (IOC_INVAL);
5070
5071 mem_va = 0;
5072 maxoff = 0x10000;
5073 ppfn = peek ? e1000g_ioc_peek_reg : e1000g_ioc_poke_reg;
5074 break;
5075
5076 case E1000G_PP_SPACE_E1000G:
5077 /*
5078 * E1000g data structure!
5079 */
5080 mem_va = (uintptr_t)e1000gp;
5081 maxoff = sizeof (struct e1000g);
5082 ppfn = peek ? e1000g_ioc_peek_mem : e1000g_ioc_poke_mem;
5083 break;
5084
5085 }
5086
5087 if (ppd->pp_acc_offset >= maxoff)
5088 return (IOC_INVAL);
5089
5090 if (ppd->pp_acc_offset + ppd->pp_acc_size > maxoff)
5091 return (IOC_INVAL);
5092
5093 /*
5094 * All OK - go!
5095 */
5096 ppd->pp_acc_offset += mem_va;
5097 (*ppfn)(e1000gp, ppd);
5098 return (peek ? IOC_REPLY : IOC_ACK);
5099 }
5100
5101 static void
5102 e1000g_ioc_peek_reg(struct e1000g *e1000gp, e1000g_peekpoke_t *ppd)
5103 {
5104 ddi_acc_handle_t handle;
5105 uint32_t *regaddr;
5106
5107 handle = e1000gp->osdep.reg_handle;
5108 regaddr = (uint32_t *)((uintptr_t)e1000gp->shared.hw_addr +
5109 (uintptr_t)ppd->pp_acc_offset);
5110
5111 ppd->pp_acc_data = ddi_get32(handle, regaddr);
5112 }
5113
5114 static void
5115 e1000g_ioc_poke_reg(struct e1000g *e1000gp, e1000g_peekpoke_t *ppd)
5116 {
5117 ddi_acc_handle_t handle;
5118 uint32_t *regaddr;
5119 uint32_t value;
5120
5121 handle = e1000gp->osdep.reg_handle;
5122 regaddr = (uint32_t *)((uintptr_t)e1000gp->shared.hw_addr +
5123 (uintptr_t)ppd->pp_acc_offset);
5124 value = (uint32_t)ppd->pp_acc_data;
5125
5126 ddi_put32(handle, regaddr, value);
5127 }
5128
5129 static void
5130 e1000g_ioc_peek_mem(struct e1000g *e1000gp, e1000g_peekpoke_t *ppd)
5131 {
5132 uint64_t value;
5133 void *vaddr;
5134
5135 vaddr = (void *)(uintptr_t)ppd->pp_acc_offset;
5136
5137 switch (ppd->pp_acc_size) {
5138 case 1:
5139 value = *(uint8_t *)vaddr;
5140 break;
5141
5142 case 2:
5143 value = *(uint16_t *)vaddr;
5144 break;
5145
5146 case 4:
5147 value = *(uint32_t *)vaddr;
5148 break;
5149
5150 case 8:
5151 value = *(uint64_t *)vaddr;
5152 break;
5153 }
5154
5155 E1000G_DEBUGLOG_4(e1000gp, E1000G_INFO_LEVEL,
5156 "e1000g_ioc_peek_mem($%p, $%p) peeked 0x%llx from $%p\n",
5157 (void *)e1000gp, (void *)ppd, value, vaddr);
5158
5159 ppd->pp_acc_data = value;
5160 }
5161
5162 static void
5163 e1000g_ioc_poke_mem(struct e1000g *e1000gp, e1000g_peekpoke_t *ppd)
5164 {
5165 uint64_t value;
5166 void *vaddr;
5167
5168 vaddr = (void *)(uintptr_t)ppd->pp_acc_offset;
5169 value = ppd->pp_acc_data;
5170
5171 E1000G_DEBUGLOG_4(e1000gp, E1000G_INFO_LEVEL,
5172 "e1000g_ioc_poke_mem($%p, $%p) poking 0x%llx at $%p\n",
5173 (void *)e1000gp, (void *)ppd, value, vaddr);
5174
5175 switch (ppd->pp_acc_size) {
5176 case 1:
5177 *(uint8_t *)vaddr = (uint8_t)value;
5178 break;
5179
5180 case 2:
5181 *(uint16_t *)vaddr = (uint16_t)value;
5182 break;
5183
5184 case 4:
5185 *(uint32_t *)vaddr = (uint32_t)value;
5186 break;
5187
5188 case 8:
5189 *(uint64_t *)vaddr = (uint64_t)value;
5190 break;
5191 }
5192 }
5193 #endif
5194
5195 /*
5196 * Loopback Support
5197 */
5198 static lb_property_t lb_normal =
5199 { normal, "normal", E1000G_LB_NONE };
5200 static lb_property_t lb_external1000 =
5201 { external, "1000Mbps", E1000G_LB_EXTERNAL_1000 };
5202 static lb_property_t lb_external100 =
5203 { external, "100Mbps", E1000G_LB_EXTERNAL_100 };
5204 static lb_property_t lb_external10 =
5205 { external, "10Mbps", E1000G_LB_EXTERNAL_10 };
5206 static lb_property_t lb_phy =
5207 { internal, "PHY", E1000G_LB_INTERNAL_PHY };
5208
5209 static enum ioc_reply
5210 e1000g_loopback_ioctl(struct e1000g *Adapter, struct iocblk *iocp, mblk_t *mp)
5211 {
5212 lb_info_sz_t *lbsp;
5213 lb_property_t *lbpp;
5214 struct e1000_hw *hw;
5215 uint32_t *lbmp;
5216 uint32_t size;
5217 uint32_t value;
5218
5219 hw = &Adapter->shared;
5220
5221 if (mp->b_cont == NULL)
5222 return (IOC_INVAL);
5223
5224 if (!e1000g_check_loopback_support(hw)) {
5225 e1000g_log(NULL, CE_WARN,
5226 "Loopback is not supported on e1000g%d", Adapter->instance);
5227 return (IOC_INVAL);
5228 }
5229
5230 switch (iocp->ioc_cmd) {
5231 default:
5232 return (IOC_INVAL);
5233
5234 case LB_GET_INFO_SIZE:
5235 size = sizeof (lb_info_sz_t);
5236 if (iocp->ioc_count != size)
5237 return (IOC_INVAL);
5238
5239 rw_enter(&Adapter->chip_lock, RW_WRITER);
5240 e1000g_get_phy_state(Adapter);
5241
5242 /*
5243 * Workaround for hardware faults. In order to get a stable
5244 * state of phy, we will wait for a specific interval and
5245 * try again. The time delay is an experiential value based
5246 * on our testing.
5247 */
5248 msec_delay(100);
5249 e1000g_get_phy_state(Adapter);
5250 rw_exit(&Adapter->chip_lock);
5251
5252 value = sizeof (lb_normal);
5253 if ((Adapter->phy_ext_status & IEEE_ESR_1000T_FD_CAPS) ||
5254 (Adapter->phy_ext_status & IEEE_ESR_1000X_FD_CAPS) ||
5255 (hw->phy.media_type == e1000_media_type_fiber) ||
5256 (hw->phy.media_type == e1000_media_type_internal_serdes)) {
5257 value += sizeof (lb_phy);
5258 switch (hw->mac.type) {
5259 case e1000_82571:
5260 case e1000_82572:
5261 case e1000_80003es2lan:
5262 value += sizeof (lb_external1000);
5263 break;
5264 }
5265 }
5266 if ((Adapter->phy_status & MII_SR_100X_FD_CAPS) ||
5267 (Adapter->phy_status & MII_SR_100T2_FD_CAPS))
5268 value += sizeof (lb_external100);
5269 if (Adapter->phy_status & MII_SR_10T_FD_CAPS)
5270 value += sizeof (lb_external10);
5271
5272 lbsp = (lb_info_sz_t *)(uintptr_t)mp->b_cont->b_rptr;
5273 *lbsp = value;
5274 break;
5275
5276 case LB_GET_INFO:
5277 value = sizeof (lb_normal);
5278 if ((Adapter->phy_ext_status & IEEE_ESR_1000T_FD_CAPS) ||
5279 (Adapter->phy_ext_status & IEEE_ESR_1000X_FD_CAPS) ||
5280 (hw->phy.media_type == e1000_media_type_fiber) ||
5281 (hw->phy.media_type == e1000_media_type_internal_serdes)) {
5282 value += sizeof (lb_phy);
5283 switch (hw->mac.type) {
5284 case e1000_82571:
5285 case e1000_82572:
5286 case e1000_80003es2lan:
5287 value += sizeof (lb_external1000);
5288 break;
5289 }
5290 }
5291 if ((Adapter->phy_status & MII_SR_100X_FD_CAPS) ||
5292 (Adapter->phy_status & MII_SR_100T2_FD_CAPS))
5293 value += sizeof (lb_external100);
5294 if (Adapter->phy_status & MII_SR_10T_FD_CAPS)
5295 value += sizeof (lb_external10);
5296
5297 size = value;
5298 if (iocp->ioc_count != size)
5299 return (IOC_INVAL);
5300
5301 value = 0;
5302 lbpp = (lb_property_t *)(uintptr_t)mp->b_cont->b_rptr;
5303 lbpp[value++] = lb_normal;
5304 if ((Adapter->phy_ext_status & IEEE_ESR_1000T_FD_CAPS) ||
5305 (Adapter->phy_ext_status & IEEE_ESR_1000X_FD_CAPS) ||
5306 (hw->phy.media_type == e1000_media_type_fiber) ||
5307 (hw->phy.media_type == e1000_media_type_internal_serdes)) {
5308 lbpp[value++] = lb_phy;
5309 switch (hw->mac.type) {
5310 case e1000_82571:
5311 case e1000_82572:
5312 case e1000_80003es2lan:
5313 lbpp[value++] = lb_external1000;
5314 break;
5315 }
5316 }
5317 if ((Adapter->phy_status & MII_SR_100X_FD_CAPS) ||
5318 (Adapter->phy_status & MII_SR_100T2_FD_CAPS))
5319 lbpp[value++] = lb_external100;
5320 if (Adapter->phy_status & MII_SR_10T_FD_CAPS)
5321 lbpp[value++] = lb_external10;
5322 break;
5323
5324 case LB_GET_MODE:
5325 size = sizeof (uint32_t);
5326 if (iocp->ioc_count != size)
5327 return (IOC_INVAL);
5328
5329 lbmp = (uint32_t *)(uintptr_t)mp->b_cont->b_rptr;
5330 *lbmp = Adapter->loopback_mode;
5331 break;
5332
5333 case LB_SET_MODE:
5334 size = 0;
5335 if (iocp->ioc_count != sizeof (uint32_t))
5336 return (IOC_INVAL);
5337
5338 lbmp = (uint32_t *)(uintptr_t)mp->b_cont->b_rptr;
5339 if (!e1000g_set_loopback_mode(Adapter, *lbmp))
5340 return (IOC_INVAL);
5341 break;
5342 }
5343
5344 iocp->ioc_count = size;
5345 iocp->ioc_error = 0;
5346
5347 if (e1000g_check_acc_handle(Adapter->osdep.reg_handle) != DDI_FM_OK) {
5348 ddi_fm_service_impact(Adapter->dip, DDI_SERVICE_DEGRADED);
5349 return (IOC_INVAL);
5350 }
5351
5352 return (IOC_REPLY);
5353 }
5354
5355 static boolean_t
5356 e1000g_check_loopback_support(struct e1000_hw *hw)
5357 {
5358 switch (hw->mac.type) {
5359 case e1000_82540:
5360 case e1000_82545:
5361 case e1000_82545_rev_3:
5362 case e1000_82546:
5363 case e1000_82546_rev_3:
5364 case e1000_82541:
5365 case e1000_82541_rev_2:
5366 case e1000_82547:
5367 case e1000_82547_rev_2:
5368 case e1000_82571:
5369 case e1000_82572:
5370 case e1000_82573:
5371 case e1000_82574:
5372 case e1000_80003es2lan:
5373 case e1000_ich9lan:
5374 case e1000_ich10lan:
5375 return (B_TRUE);
5376 }
5377 return (B_FALSE);
5378 }
5379
5380 static boolean_t
5381 e1000g_set_loopback_mode(struct e1000g *Adapter, uint32_t mode)
5382 {
5383 struct e1000_hw *hw;
5384 int i, times;
5385 boolean_t link_up;
5386
5387 if (mode == Adapter->loopback_mode)
5388 return (B_TRUE);
5389
5390 hw = &Adapter->shared;
5391 times = 0;
5392
5393 Adapter->loopback_mode = mode;
5394
5395 if (mode == E1000G_LB_NONE) {
5396 /* Reset the chip */
5397 hw->phy.autoneg_wait_to_complete = B_TRUE;
5398 (void) e1000g_reset_adapter(Adapter);
5399 hw->phy.autoneg_wait_to_complete = B_FALSE;
5400 return (B_TRUE);
5401 }
5402
5403 again:
5404
5405 rw_enter(&Adapter->chip_lock, RW_WRITER);
5406
5407 switch (mode) {
5408 default:
5409 rw_exit(&Adapter->chip_lock);
5410 return (B_FALSE);
5411
5412 case E1000G_LB_EXTERNAL_1000:
5413 e1000g_set_external_loopback_1000(Adapter);
5414 break;
5415
5416 case E1000G_LB_EXTERNAL_100:
5417 e1000g_set_external_loopback_100(Adapter);
5418 break;
5419
5420 case E1000G_LB_EXTERNAL_10:
5421 e1000g_set_external_loopback_10(Adapter);
5422 break;
5423
5424 case E1000G_LB_INTERNAL_PHY:
5425 e1000g_set_internal_loopback(Adapter);
5426 break;
5427 }
5428
5429 times++;
5430
5431 rw_exit(&Adapter->chip_lock);
5432
5433 /* Wait for link up */
5434 for (i = (PHY_FORCE_LIMIT * 2); i > 0; i--)
5435 msec_delay(100);
5436
5437 rw_enter(&Adapter->chip_lock, RW_WRITER);
5438
5439 link_up = e1000g_link_up(Adapter);
5440
5441 rw_exit(&Adapter->chip_lock);
5442
5443 if (!link_up) {
5444 E1000G_DEBUGLOG_0(Adapter, E1000G_INFO_LEVEL,
5445 "Failed to get the link up");
5446 if (times < 2) {
5447 /* Reset the link */
5448 E1000G_DEBUGLOG_0(Adapter, E1000G_INFO_LEVEL,
5449 "Reset the link ...");
5450 (void) e1000g_reset_adapter(Adapter);
5451 goto again;
5452 }
5453
5454 /*
5455 * Reset driver to loopback none when set loopback failed
5456 * for the second time.
5457 */
5458 Adapter->loopback_mode = E1000G_LB_NONE;
5459
5460 /* Reset the chip */
5461 hw->phy.autoneg_wait_to_complete = B_TRUE;
5462 (void) e1000g_reset_adapter(Adapter);
5463 hw->phy.autoneg_wait_to_complete = B_FALSE;
5464
5465 E1000G_DEBUGLOG_0(Adapter, E1000G_INFO_LEVEL,
5466 "Set loopback mode failed, reset to loopback none");
5467
5468 return (B_FALSE);
5469 }
5470
5471 return (B_TRUE);
5472 }
5473
5474 /*
5475 * The following loopback settings are from Intel's technical
5476 * document - "How To Loopback". All the register settings and
5477 * time delay values are directly inherited from the document
5478 * without more explanations available.
5479 */
5480 static void
5481 e1000g_set_internal_loopback(struct e1000g *Adapter)
5482 {
5483 struct e1000_hw *hw;
5484 uint32_t ctrl;
5485 uint32_t status;
5486 uint16_t phy_ctrl;
5487 uint16_t phy_reg;
5488 uint32_t txcw;
5489
5490 hw = &Adapter->shared;
5491
5492 /* Disable Smart Power Down */
5493 phy_spd_state(hw, B_FALSE);
5494
5495 (void) e1000_read_phy_reg(hw, PHY_CONTROL, &phy_ctrl);
5496 phy_ctrl &= ~(MII_CR_AUTO_NEG_EN | MII_CR_SPEED_100 | MII_CR_SPEED_10);
5497 phy_ctrl |= MII_CR_FULL_DUPLEX | MII_CR_SPEED_1000;
5498
5499 switch (hw->mac.type) {
5500 case e1000_82540:
5501 case e1000_82545:
5502 case e1000_82545_rev_3:
5503 case e1000_82546:
5504 case e1000_82546_rev_3:
5505 case e1000_82573:
5506 /* Auto-MDI/MDIX off */
5507 (void) e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
5508 /* Reset PHY to update Auto-MDI/MDIX */
5509 (void) e1000_write_phy_reg(hw, PHY_CONTROL,
5510 phy_ctrl | MII_CR_RESET | MII_CR_AUTO_NEG_EN);
5511 /* Reset PHY to auto-neg off and force 1000 */
5512 (void) e1000_write_phy_reg(hw, PHY_CONTROL,
5513 phy_ctrl | MII_CR_RESET);
5514 /*
5515 * Disable PHY receiver for 82540/545/546 and 82573 Family.
5516 * See comments above e1000g_set_internal_loopback() for the
5517 * background.
5518 */
5519 (void) e1000_write_phy_reg(hw, 29, 0x001F);
5520 (void) e1000_write_phy_reg(hw, 30, 0x8FFC);
5521 (void) e1000_write_phy_reg(hw, 29, 0x001A);
5522 (void) e1000_write_phy_reg(hw, 30, 0x8FF0);
5523 break;
5524 case e1000_80003es2lan:
5525 /* Force Link Up */
5526 (void) e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
5527 0x1CC);
5528 /* Sets PCS loopback at 1Gbs */
5529 (void) e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
5530 0x1046);
5531 break;
5532 }
5533
5534 /*
5535 * The following registers should be set for e1000_phy_bm phy type.
5536 * e1000_82574, e1000_ich10lan and some e1000_ich9lan use this phy.
5537 * For others, we do not need to set these registers.
5538 */
5539 if (hw->phy.type == e1000_phy_bm) {
5540 /* Set Default MAC Interface speed to 1GB */
5541 (void) e1000_read_phy_reg(hw, PHY_REG(2, 21), &phy_reg);
5542 phy_reg &= ~0x0007;
5543 phy_reg |= 0x006;
5544 (void) e1000_write_phy_reg(hw, PHY_REG(2, 21), phy_reg);
5545 /* Assert SW reset for above settings to take effect */
5546 (void) e1000_phy_commit(hw);
5547 msec_delay(1);
5548 /* Force Full Duplex */
5549 (void) e1000_read_phy_reg(hw, PHY_REG(769, 16), &phy_reg);
5550 (void) e1000_write_phy_reg(hw, PHY_REG(769, 16),
5551 phy_reg | 0x000C);
5552 /* Set Link Up (in force link) */
5553 (void) e1000_read_phy_reg(hw, PHY_REG(776, 16), &phy_reg);
5554 (void) e1000_write_phy_reg(hw, PHY_REG(776, 16),
5555 phy_reg | 0x0040);
5556 /* Force Link */
5557 (void) e1000_read_phy_reg(hw, PHY_REG(769, 16), &phy_reg);
5558 (void) e1000_write_phy_reg(hw, PHY_REG(769, 16),
5559 phy_reg | 0x0040);
5560 /* Set Early Link Enable */
5561 (void) e1000_read_phy_reg(hw, PHY_REG(769, 20), &phy_reg);
5562 (void) e1000_write_phy_reg(hw, PHY_REG(769, 20),
5563 phy_reg | 0x0400);
5564 }
5565
5566 /* Set loopback */
5567 (void) e1000_write_phy_reg(hw, PHY_CONTROL, phy_ctrl | MII_CR_LOOPBACK);
5568
5569 msec_delay(250);
5570
5571 /* Now set up the MAC to the same speed/duplex as the PHY. */
5572 ctrl = E1000_READ_REG(hw, E1000_CTRL);
5573 ctrl &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
5574 ctrl |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
5575 E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
5576 E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */
5577 E1000_CTRL_FD); /* Force Duplex to FULL */
5578
5579 switch (hw->mac.type) {
5580 case e1000_82540:
5581 case e1000_82545:
5582 case e1000_82545_rev_3:
5583 case e1000_82546:
5584 case e1000_82546_rev_3:
5585 /*
5586 * For some serdes we'll need to commit the writes now
5587 * so that the status is updated on link
5588 */
5589 if (hw->phy.media_type == e1000_media_type_internal_serdes) {
5590 E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
5591 msec_delay(100);
5592 ctrl = E1000_READ_REG(hw, E1000_CTRL);
5593 }
5594
5595 if (hw->phy.media_type == e1000_media_type_copper) {
5596 /* Invert Loss of Signal */
5597 ctrl |= E1000_CTRL_ILOS;
5598 } else {
5599 /* Set ILOS on fiber nic if half duplex is detected */
5600 status = E1000_READ_REG(hw, E1000_STATUS);
5601 if ((status & E1000_STATUS_FD) == 0)
5602 ctrl |= E1000_CTRL_ILOS | E1000_CTRL_SLU;
5603 }
5604 break;
5605
5606 case e1000_82571:
5607 case e1000_82572:
5608 /*
5609 * The fiber/SerDes versions of this adapter do not contain an
5610 * accessible PHY. Therefore, loopback beyond MAC must be done
5611 * using SerDes analog loopback.
5612 */
5613 if (hw->phy.media_type != e1000_media_type_copper) {
5614 /* Disable autoneg by setting bit 31 of TXCW to zero */
5615 txcw = E1000_READ_REG(hw, E1000_TXCW);
5616 txcw &= ~((uint32_t)1 << 31);
5617 E1000_WRITE_REG(hw, E1000_TXCW, txcw);
5618
5619 /*
5620 * Write 0x410 to Serdes Control register
5621 * to enable Serdes analog loopback
5622 */
5623 E1000_WRITE_REG(hw, E1000_SCTL, 0x0410);
5624 msec_delay(10);
5625 }
5626
5627 status = E1000_READ_REG(hw, E1000_STATUS);
5628 /* Set ILOS on fiber nic if half duplex is detected */
5629 if ((hw->phy.media_type == e1000_media_type_fiber) &&
5630 ((status & E1000_STATUS_FD) == 0 ||
5631 (status & E1000_STATUS_LU) == 0))
5632 ctrl |= E1000_CTRL_ILOS | E1000_CTRL_SLU;
5633 else if (hw->phy.media_type == e1000_media_type_internal_serdes)
5634 ctrl |= E1000_CTRL_SLU;
5635 break;
5636
5637 case e1000_82573:
5638 ctrl |= E1000_CTRL_ILOS;
5639 break;
5640 case e1000_ich9lan:
5641 case e1000_ich10lan:
5642 ctrl |= E1000_CTRL_SLU;
5643 break;
5644 }
5645 if (hw->phy.type == e1000_phy_bm)
5646 ctrl |= E1000_CTRL_SLU | E1000_CTRL_ILOS;
5647
5648 E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
5649 }
5650
5651 static void
5652 e1000g_set_external_loopback_1000(struct e1000g *Adapter)
5653 {
5654 struct e1000_hw *hw;
5655 uint32_t rctl;
5656 uint32_t ctrl_ext;
5657 uint32_t ctrl;
5658 uint32_t status;
5659 uint32_t txcw;
5660 uint16_t phydata;
5661
5662 hw = &Adapter->shared;
5663
5664 /* Disable Smart Power Down */
5665 phy_spd_state(hw, B_FALSE);
5666
5667 switch (hw->mac.type) {
5668 case e1000_82571:
5669 case e1000_82572:
5670 switch (hw->phy.media_type) {
5671 case e1000_media_type_copper:
5672 /* Force link up (Must be done before the PHY writes) */
5673 ctrl = E1000_READ_REG(hw, E1000_CTRL);
5674 ctrl |= E1000_CTRL_SLU; /* Force Link Up */
5675 E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
5676
5677 rctl = E1000_READ_REG(hw, E1000_RCTL);
5678 rctl |= (E1000_RCTL_EN |
5679 E1000_RCTL_SBP |
5680 E1000_RCTL_UPE |
5681 E1000_RCTL_MPE |
5682 E1000_RCTL_LPE |
5683 E1000_RCTL_BAM); /* 0x803E */
5684 E1000_WRITE_REG(hw, E1000_RCTL, rctl);
5685
5686 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
5687 ctrl_ext |= (E1000_CTRL_EXT_SDP4_DATA |
5688 E1000_CTRL_EXT_SDP6_DATA |
5689 E1000_CTRL_EXT_SDP3_DATA |
5690 E1000_CTRL_EXT_SDP4_DIR |
5691 E1000_CTRL_EXT_SDP6_DIR |
5692 E1000_CTRL_EXT_SDP3_DIR); /* 0x0DD0 */
5693 E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
5694
5695 /*
5696 * This sequence tunes the PHY's SDP and no customer
5697 * settable values. For background, see comments above
5698 * e1000g_set_internal_loopback().
5699 */
5700 (void) e1000_write_phy_reg(hw, 0x0, 0x140);
5701 msec_delay(10);
5702 (void) e1000_write_phy_reg(hw, 0x9, 0x1A00);
5703 (void) e1000_write_phy_reg(hw, 0x12, 0xC10);
5704 (void) e1000_write_phy_reg(hw, 0x12, 0x1C10);
5705 (void) e1000_write_phy_reg(hw, 0x1F37, 0x76);
5706 (void) e1000_write_phy_reg(hw, 0x1F33, 0x1);
5707 (void) e1000_write_phy_reg(hw, 0x1F33, 0x0);
5708
5709 (void) e1000_write_phy_reg(hw, 0x1F35, 0x65);
5710 (void) e1000_write_phy_reg(hw, 0x1837, 0x3F7C);
5711 (void) e1000_write_phy_reg(hw, 0x1437, 0x3FDC);
5712 (void) e1000_write_phy_reg(hw, 0x1237, 0x3F7C);
5713 (void) e1000_write_phy_reg(hw, 0x1137, 0x3FDC);
5714
5715 msec_delay(50);
5716 break;
5717 case e1000_media_type_fiber:
5718 case e1000_media_type_internal_serdes:
5719 status = E1000_READ_REG(hw, E1000_STATUS);
5720 if (((status & E1000_STATUS_LU) == 0) ||
5721 (hw->phy.media_type ==
5722 e1000_media_type_internal_serdes)) {
5723 ctrl = E1000_READ_REG(hw, E1000_CTRL);
5724 ctrl |= E1000_CTRL_ILOS | E1000_CTRL_SLU;
5725 E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
5726 }
5727
5728 /* Disable autoneg by setting bit 31 of TXCW to zero */
5729 txcw = E1000_READ_REG(hw, E1000_TXCW);
5730 txcw &= ~((uint32_t)1 << 31);
5731 E1000_WRITE_REG(hw, E1000_TXCW, txcw);
5732
5733 /*
5734 * Write 0x410 to Serdes Control register
5735 * to enable Serdes analog loopback
5736 */
5737 E1000_WRITE_REG(hw, E1000_SCTL, 0x0410);
5738 msec_delay(10);
5739 break;
5740 default:
5741 break;
5742 }
5743 break;
5744 case e1000_82574:
5745 case e1000_80003es2lan:
5746 case e1000_ich9lan:
5747 case e1000_ich10lan:
5748 (void) e1000_read_phy_reg(hw, GG82563_REG(6, 16), &phydata);
5749 (void) e1000_write_phy_reg(hw, GG82563_REG(6, 16),
5750 phydata | (1 << 5));
5751 Adapter->param_adv_autoneg = 1;
5752 Adapter->param_adv_1000fdx = 1;
5753 (void) e1000g_reset_link(Adapter);
5754 break;
5755 }
5756 }
5757
5758 static void
5759 e1000g_set_external_loopback_100(struct e1000g *Adapter)
5760 {
5761 struct e1000_hw *hw;
5762 uint32_t ctrl;
5763 uint16_t phy_ctrl;
5764
5765 hw = &Adapter->shared;
5766
5767 /* Disable Smart Power Down */
5768 phy_spd_state(hw, B_FALSE);
5769
5770 phy_ctrl = (MII_CR_FULL_DUPLEX |
5771 MII_CR_SPEED_100);
5772
5773 /* Force 100/FD, reset PHY */
5774 (void) e1000_write_phy_reg(hw, PHY_CONTROL,
5775 phy_ctrl | MII_CR_RESET); /* 0xA100 */
5776 msec_delay(10);
5777
5778 /* Force 100/FD */
5779 (void) e1000_write_phy_reg(hw, PHY_CONTROL,
5780 phy_ctrl); /* 0x2100 */
5781 msec_delay(10);
5782
5783 /* Now setup the MAC to the same speed/duplex as the PHY. */
5784 ctrl = E1000_READ_REG(hw, E1000_CTRL);
5785 ctrl &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
5786 ctrl |= (E1000_CTRL_SLU | /* Force Link Up */
5787 E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
5788 E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
5789 E1000_CTRL_SPD_100 | /* Force Speed to 100 */
5790 E1000_CTRL_FD); /* Force Duplex to FULL */
5791
5792 E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
5793 }
5794
5795 static void
5796 e1000g_set_external_loopback_10(struct e1000g *Adapter)
5797 {
5798 struct e1000_hw *hw;
5799 uint32_t ctrl;
5800 uint16_t phy_ctrl;
5801
5802 hw = &Adapter->shared;
5803
5804 /* Disable Smart Power Down */
5805 phy_spd_state(hw, B_FALSE);
5806
5807 phy_ctrl = (MII_CR_FULL_DUPLEX |
5808 MII_CR_SPEED_10);
5809
5810 /* Force 10/FD, reset PHY */
5811 (void) e1000_write_phy_reg(hw, PHY_CONTROL,
5812 phy_ctrl | MII_CR_RESET); /* 0x8100 */
5813 msec_delay(10);
5814
5815 /* Force 10/FD */
5816 (void) e1000_write_phy_reg(hw, PHY_CONTROL,
5817 phy_ctrl); /* 0x0100 */
5818 msec_delay(10);
5819
5820 /* Now setup the MAC to the same speed/duplex as the PHY. */
5821 ctrl = E1000_READ_REG(hw, E1000_CTRL);
5822 ctrl &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
5823 ctrl |= (E1000_CTRL_SLU | /* Force Link Up */
5824 E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
5825 E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
5826 E1000_CTRL_SPD_10 | /* Force Speed to 10 */
5827 E1000_CTRL_FD); /* Force Duplex to FULL */
5828
5829 E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
5830 }
5831
5832 #ifdef __sparc
5833 static boolean_t
5834 e1000g_find_mac_address(struct e1000g *Adapter)
5835 {
5836 struct e1000_hw *hw = &Adapter->shared;
5837 uchar_t *bytes;
5838 struct ether_addr sysaddr;
5839 uint_t nelts;
5840 int err;
5841 boolean_t found = B_FALSE;
5842
5843 /*
5844 * The "vendor's factory-set address" may already have
5845 * been extracted from the chip, but if the property
5846 * "local-mac-address" is set we use that instead.
5847 *
5848 * We check whether it looks like an array of 6
5849 * bytes (which it should, if OBP set it). If we can't
5850 * make sense of it this way, we'll ignore it.
5851 */
5852 err = ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, Adapter->dip,
5853 DDI_PROP_DONTPASS, "local-mac-address", &bytes, &nelts);
5854 if (err == DDI_PROP_SUCCESS) {
5855 if (nelts == ETHERADDRL) {
5856 while (nelts--)
5857 hw->mac.addr[nelts] = bytes[nelts];
5858 found = B_TRUE;
5859 }
5860 ddi_prop_free(bytes);
5861 }
5862
5863 /*
5864 * Look up the OBP property "local-mac-address?". If the user has set
5865 * 'local-mac-address? = false', use "the system address" instead.
5866 */
5867 if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, Adapter->dip, 0,
5868 "local-mac-address?", &bytes, &nelts) == DDI_PROP_SUCCESS) {
5869 if (strncmp("false", (caddr_t)bytes, (size_t)nelts) == 0) {
5870 if (localetheraddr(NULL, &sysaddr) != 0) {
5871 bcopy(&sysaddr, hw->mac.addr, ETHERADDRL);
5872 found = B_TRUE;
5873 }
5874 }
5875 ddi_prop_free(bytes);
5876 }
5877
5878 /*
5879 * Finally(!), if there's a valid "mac-address" property (created
5880 * if we netbooted from this interface), we must use this instead
5881 * of any of the above to ensure that the NFS/install server doesn't
5882 * get confused by the address changing as Solaris takes over!
5883 */
5884 err = ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, Adapter->dip,
5885 DDI_PROP_DONTPASS, "mac-address", &bytes, &nelts);
5886 if (err == DDI_PROP_SUCCESS) {
5887 if (nelts == ETHERADDRL) {
5888 while (nelts--)
5889 hw->mac.addr[nelts] = bytes[nelts];
5890 found = B_TRUE;
5891 }
5892 ddi_prop_free(bytes);
5893 }
5894
5895 if (found) {
5896 bcopy(hw->mac.addr, hw->mac.perm_addr,
5897 ETHERADDRL);
5898 }
5899
5900 return (found);
5901 }
5902 #endif
5903
5904 static int
5905 e1000g_add_intrs(struct e1000g *Adapter)
5906 {
5907 dev_info_t *devinfo;
5908 int intr_types;
5909 int rc;
5910
5911 devinfo = Adapter->dip;
5912
5913 /* Get supported interrupt types */
5914 rc = ddi_intr_get_supported_types(devinfo, &intr_types);
5915
5916 if (rc != DDI_SUCCESS) {
5917 E1000G_DEBUGLOG_1(Adapter, E1000G_WARN_LEVEL,
5918 "Get supported interrupt types failed: %d\n", rc);
5919 return (DDI_FAILURE);
5920 }
5921
5922 /*
5923 * Based on Intel Technical Advisory document (TA-160), there are some
5924 * cases where some older Intel PCI-X NICs may "advertise" to the OS
5925 * that it supports MSI, but in fact has problems.
5926 * So we should only enable MSI for PCI-E NICs and disable MSI for old
5927 * PCI/PCI-X NICs.
5928 */
5929 if (Adapter->shared.mac.type < e1000_82571)
5930 Adapter->msi_enable = B_FALSE;
5931
5932 if ((intr_types & DDI_INTR_TYPE_MSI) && Adapter->msi_enable) {
5933 rc = e1000g_intr_add(Adapter, DDI_INTR_TYPE_MSI);
5934
5935 if (rc != DDI_SUCCESS) {
5936 /* EMPTY */
5937 E1000G_DEBUGLOG_0(Adapter, E1000G_WARN_LEVEL,
5938 "Add MSI failed, trying Legacy interrupts\n");
5939 } else {
5940 Adapter->intr_type = DDI_INTR_TYPE_MSI;
5941 }
5942 }
5943
5944 if ((Adapter->intr_type == 0) &&
5945 (intr_types & DDI_INTR_TYPE_FIXED)) {
5946 rc = e1000g_intr_add(Adapter, DDI_INTR_TYPE_FIXED);
5947
5948 if (rc != DDI_SUCCESS) {
5949 E1000G_DEBUGLOG_0(Adapter, E1000G_WARN_LEVEL,
5950 "Add Legacy interrupts failed\n");
5951 return (DDI_FAILURE);
5952 }
5953
5954 Adapter->intr_type = DDI_INTR_TYPE_FIXED;
5955 }
5956
5957 if (Adapter->intr_type == 0) {
5958 E1000G_DEBUGLOG_0(Adapter, E1000G_WARN_LEVEL,
5959 "No interrupts registered\n");
5960 return (DDI_FAILURE);
5961 }
5962
5963 return (DDI_SUCCESS);
5964 }
5965
5966 /*
5967 * e1000g_intr_add() handles MSI/Legacy interrupts
5968 */
5969 static int
5970 e1000g_intr_add(struct e1000g *Adapter, int intr_type)
5971 {
5972 dev_info_t *devinfo;
5973 int count, avail, actual;
5974 int x, y, rc, inum = 0;
5975 int flag;
5976 ddi_intr_handler_t *intr_handler;
5977
5978 devinfo = Adapter->dip;
5979
5980 /* get number of interrupts */
5981 rc = ddi_intr_get_nintrs(devinfo, intr_type, &count);
5982 if ((rc != DDI_SUCCESS) || (count == 0)) {
5983 E1000G_DEBUGLOG_2(Adapter, E1000G_WARN_LEVEL,
5984 "Get interrupt number failed. Return: %d, count: %d\n",
5985 rc, count);
5986 return (DDI_FAILURE);
5987 }
5988
5989 /* get number of available interrupts */
5990 rc = ddi_intr_get_navail(devinfo, intr_type, &avail);
5991 if ((rc != DDI_SUCCESS) || (avail == 0)) {
5992 E1000G_DEBUGLOG_2(Adapter, E1000G_WARN_LEVEL,
5993 "Get interrupt available number failed. "
5994 "Return: %d, available: %d\n", rc, avail);
5995 return (DDI_FAILURE);
5996 }
5997
5998 if (avail < count) {
5999 /* EMPTY */
6000 E1000G_DEBUGLOG_2(Adapter, E1000G_WARN_LEVEL,
6001 "Interrupts count: %d, available: %d\n",
6002 count, avail);
6003 }
6004
6005 /* Allocate an array of interrupt handles */
6006 Adapter->intr_size = count * sizeof (ddi_intr_handle_t);
6007 Adapter->htable = kmem_alloc(Adapter->intr_size, KM_SLEEP);
6008
6009 /* Set NORMAL behavior for both MSI and FIXED interrupt */
6010 flag = DDI_INTR_ALLOC_NORMAL;
6011
6012 /* call ddi_intr_alloc() */
6013 rc = ddi_intr_alloc(devinfo, Adapter->htable, intr_type, inum,
6014 count, &actual, flag);
6015
6016 if ((rc != DDI_SUCCESS) || (actual == 0)) {
6017 E1000G_DEBUGLOG_1(Adapter, E1000G_WARN_LEVEL,
6018 "Allocate interrupts failed: %d\n", rc);
6019
6020 kmem_free(Adapter->htable, Adapter->intr_size);
6021 return (DDI_FAILURE);
6022 }
6023
6024 if (actual < count) {
6025 /* EMPTY */
6026 E1000G_DEBUGLOG_2(Adapter, E1000G_WARN_LEVEL,
6027 "Interrupts requested: %d, received: %d\n",
6028 count, actual);
6029 }
6030
6031 Adapter->intr_cnt = actual;
6032
6033 /* Get priority for first msi, assume remaining are all the same */
6034 rc = ddi_intr_get_pri(Adapter->htable[0], &Adapter->intr_pri);
6035
6036 if (rc != DDI_SUCCESS) {
6037 E1000G_DEBUGLOG_1(Adapter, E1000G_WARN_LEVEL,
6038 "Get interrupt priority failed: %d\n", rc);
6039
6040 /* Free already allocated intr */
6041 for (y = 0; y < actual; y++)
6042 (void) ddi_intr_free(Adapter->htable[y]);
6043
6044 kmem_free(Adapter->htable, Adapter->intr_size);
6045 return (DDI_FAILURE);
6046 }
6047
6048 /*
6049 * In Legacy Interrupt mode, for PCI-Express adapters, we should
6050 * use the interrupt service routine e1000g_intr_pciexpress()
6051 * to avoid interrupt stealing when sharing interrupt with other
6052 * devices.
6053 */
6054 if (Adapter->shared.mac.type < e1000_82571)
6055 intr_handler = (ddi_intr_handler_t *)e1000g_intr;
6056 else
6057 intr_handler = (ddi_intr_handler_t *)e1000g_intr_pciexpress;
6058
6059 /* Call ddi_intr_add_handler() */
6060 for (x = 0; x < actual; x++) {
6061 rc = ddi_intr_add_handler(Adapter->htable[x],
6062 intr_handler, (caddr_t)Adapter, NULL);
6063
6064 if (rc != DDI_SUCCESS) {
6065 E1000G_DEBUGLOG_1(Adapter, E1000G_WARN_LEVEL,
6066 "Add interrupt handler failed: %d\n", rc);
6067
6068 /* Remove already added handler */
6069 for (y = 0; y < x; y++)
6070 (void) ddi_intr_remove_handler(
6071 Adapter->htable[y]);
6072
6073 /* Free already allocated intr */
6074 for (y = 0; y < actual; y++)
6075 (void) ddi_intr_free(Adapter->htable[y]);
6076
6077 kmem_free(Adapter->htable, Adapter->intr_size);
6078 return (DDI_FAILURE);
6079 }
6080 }
6081
6082 rc = ddi_intr_get_cap(Adapter->htable[0], &Adapter->intr_cap);
6083
6084 if (rc != DDI_SUCCESS) {
6085 E1000G_DEBUGLOG_1(Adapter, E1000G_WARN_LEVEL,
6086 "Get interrupt cap failed: %d\n", rc);
6087
6088 /* Free already allocated intr */
6089 for (y = 0; y < actual; y++) {
6090 (void) ddi_intr_remove_handler(Adapter->htable[y]);
6091 (void) ddi_intr_free(Adapter->htable[y]);
6092 }
6093
6094 kmem_free(Adapter->htable, Adapter->intr_size);
6095 return (DDI_FAILURE);
6096 }
6097
6098 return (DDI_SUCCESS);
6099 }
6100
6101 static int
6102 e1000g_rem_intrs(struct e1000g *Adapter)
6103 {
6104 int x;
6105 int rc;
6106
6107 for (x = 0; x < Adapter->intr_cnt; x++) {
6108 rc = ddi_intr_remove_handler(Adapter->htable[x]);
6109 if (rc != DDI_SUCCESS) {
6110 E1000G_DEBUGLOG_1(Adapter, E1000G_WARN_LEVEL,
6111 "Remove intr handler failed: %d\n", rc);
6112 return (DDI_FAILURE);
6113 }
6114
6115 rc = ddi_intr_free(Adapter->htable[x]);
6116 if (rc != DDI_SUCCESS) {
6117 E1000G_DEBUGLOG_1(Adapter, E1000G_WARN_LEVEL,
6118 "Free intr failed: %d\n", rc);
6119 return (DDI_FAILURE);
6120 }
6121 }
6122
6123 kmem_free(Adapter->htable, Adapter->intr_size);
6124
6125 return (DDI_SUCCESS);
6126 }
6127
6128 static int
6129 e1000g_enable_intrs(struct e1000g *Adapter)
6130 {
6131 int x;
6132 int rc;
6133
6134 /* Enable interrupts */
6135 if (Adapter->intr_cap & DDI_INTR_FLAG_BLOCK) {
6136 /* Call ddi_intr_block_enable() for MSI */
6137 rc = ddi_intr_block_enable(Adapter->htable,
6138 Adapter->intr_cnt);
6139 if (rc != DDI_SUCCESS) {
6140 E1000G_DEBUGLOG_1(Adapter, E1000G_WARN_LEVEL,
6141 "Enable block intr failed: %d\n", rc);
6142 return (DDI_FAILURE);
6143 }
6144 } else {
6145 /* Call ddi_intr_enable() for Legacy/MSI non block enable */
6146 for (x = 0; x < Adapter->intr_cnt; x++) {
6147 rc = ddi_intr_enable(Adapter->htable[x]);
6148 if (rc != DDI_SUCCESS) {
6149 E1000G_DEBUGLOG_1(Adapter, E1000G_WARN_LEVEL,
6150 "Enable intr failed: %d\n", rc);
6151 return (DDI_FAILURE);
6152 }
6153 }
6154 }
6155
6156 return (DDI_SUCCESS);
6157 }
6158
6159 static int
6160 e1000g_disable_intrs(struct e1000g *Adapter)
6161 {
6162 int x;
6163 int rc;
6164
6165 /* Disable all interrupts */
6166 if (Adapter->intr_cap & DDI_INTR_FLAG_BLOCK) {
6167 rc = ddi_intr_block_disable(Adapter->htable,
6168 Adapter->intr_cnt);
6169 if (rc != DDI_SUCCESS) {
6170 E1000G_DEBUGLOG_1(Adapter, E1000G_WARN_LEVEL,
6171 "Disable block intr failed: %d\n", rc);
6172 return (DDI_FAILURE);
6173 }
6174 } else {
6175 for (x = 0; x < Adapter->intr_cnt; x++) {
6176 rc = ddi_intr_disable(Adapter->htable[x]);
6177 if (rc != DDI_SUCCESS) {
6178 E1000G_DEBUGLOG_1(Adapter, E1000G_WARN_LEVEL,
6179 "Disable intr failed: %d\n", rc);
6180 return (DDI_FAILURE);
6181 }
6182 }
6183 }
6184
6185 return (DDI_SUCCESS);
6186 }
6187
6188 /*
6189 * e1000g_get_phy_state - get the state of PHY registers, save in the adapter
6190 */
6191 static void
6192 e1000g_get_phy_state(struct e1000g *Adapter)
6193 {
6194 struct e1000_hw *hw = &Adapter->shared;
6195
6196 if (hw->phy.media_type == e1000_media_type_copper) {
6197 (void) e1000_read_phy_reg(hw, PHY_CONTROL, &Adapter->phy_ctrl);
6198 (void) e1000_read_phy_reg(hw, PHY_STATUS, &Adapter->phy_status);
6199 (void) e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
6200 &Adapter->phy_an_adv);
6201 (void) e1000_read_phy_reg(hw, PHY_AUTONEG_EXP,
6202 &Adapter->phy_an_exp);
6203 (void) e1000_read_phy_reg(hw, PHY_EXT_STATUS,
6204 &Adapter->phy_ext_status);
6205 (void) e1000_read_phy_reg(hw, PHY_1000T_CTRL,
6206 &Adapter->phy_1000t_ctrl);
6207 (void) e1000_read_phy_reg(hw, PHY_1000T_STATUS,
6208 &Adapter->phy_1000t_status);
6209 (void) e1000_read_phy_reg(hw, PHY_LP_ABILITY,
6210 &Adapter->phy_lp_able);
6211
6212 Adapter->param_autoneg_cap =
6213 (Adapter->phy_status & MII_SR_AUTONEG_CAPS) ? 1 : 0;
6214 Adapter->param_pause_cap =
6215 (Adapter->phy_an_adv & NWAY_AR_PAUSE) ? 1 : 0;
6216 Adapter->param_asym_pause_cap =
6217 (Adapter->phy_an_adv & NWAY_AR_ASM_DIR) ? 1 : 0;
6218 Adapter->param_1000fdx_cap =
6219 ((Adapter->phy_ext_status & IEEE_ESR_1000T_FD_CAPS) ||
6220 (Adapter->phy_ext_status & IEEE_ESR_1000X_FD_CAPS)) ? 1 : 0;
6221 Adapter->param_1000hdx_cap =
6222 ((Adapter->phy_ext_status & IEEE_ESR_1000T_HD_CAPS) ||
6223 (Adapter->phy_ext_status & IEEE_ESR_1000X_HD_CAPS)) ? 1 : 0;
6224 Adapter->param_100t4_cap =
6225 (Adapter->phy_status & MII_SR_100T4_CAPS) ? 1 : 0;
6226 Adapter->param_100fdx_cap =
6227 ((Adapter->phy_status & MII_SR_100X_FD_CAPS) ||
6228 (Adapter->phy_status & MII_SR_100T2_FD_CAPS)) ? 1 : 0;
6229 Adapter->param_100hdx_cap =
6230 ((Adapter->phy_status & MII_SR_100X_HD_CAPS) ||
6231 (Adapter->phy_status & MII_SR_100T2_HD_CAPS)) ? 1 : 0;
6232 Adapter->param_10fdx_cap =
6233 (Adapter->phy_status & MII_SR_10T_FD_CAPS) ? 1 : 0;
6234 Adapter->param_10hdx_cap =
6235 (Adapter->phy_status & MII_SR_10T_HD_CAPS) ? 1 : 0;
6236
6237 Adapter->param_adv_autoneg = hw->mac.autoneg;
6238 Adapter->param_adv_pause =
6239 (Adapter->phy_an_adv & NWAY_AR_PAUSE) ? 1 : 0;
6240 Adapter->param_adv_asym_pause =
6241 (Adapter->phy_an_adv & NWAY_AR_ASM_DIR) ? 1 : 0;
6242 Adapter->param_adv_1000hdx =
6243 (Adapter->phy_1000t_ctrl & CR_1000T_HD_CAPS) ? 1 : 0;
6244 Adapter->param_adv_100t4 =
6245 (Adapter->phy_an_adv & NWAY_AR_100T4_CAPS) ? 1 : 0;
6246 if (Adapter->param_adv_autoneg == 1) {
6247 Adapter->param_adv_1000fdx =
6248 (Adapter->phy_1000t_ctrl & CR_1000T_FD_CAPS)
6249 ? 1 : 0;
6250 Adapter->param_adv_100fdx =
6251 (Adapter->phy_an_adv & NWAY_AR_100TX_FD_CAPS)
6252 ? 1 : 0;
6253 Adapter->param_adv_100hdx =
6254 (Adapter->phy_an_adv & NWAY_AR_100TX_HD_CAPS)
6255 ? 1 : 0;
6256 Adapter->param_adv_10fdx =
6257 (Adapter->phy_an_adv & NWAY_AR_10T_FD_CAPS) ? 1 : 0;
6258 Adapter->param_adv_10hdx =
6259 (Adapter->phy_an_adv & NWAY_AR_10T_HD_CAPS) ? 1 : 0;
6260 }
6261
6262 Adapter->param_lp_autoneg =
6263 (Adapter->phy_an_exp & NWAY_ER_LP_NWAY_CAPS) ? 1 : 0;
6264 Adapter->param_lp_pause =
6265 (Adapter->phy_lp_able & NWAY_LPAR_PAUSE) ? 1 : 0;
6266 Adapter->param_lp_asym_pause =
6267 (Adapter->phy_lp_able & NWAY_LPAR_ASM_DIR) ? 1 : 0;
6268 Adapter->param_lp_1000fdx =
6269 (Adapter->phy_1000t_status & SR_1000T_LP_FD_CAPS) ? 1 : 0;
6270 Adapter->param_lp_1000hdx =
6271 (Adapter->phy_1000t_status & SR_1000T_LP_HD_CAPS) ? 1 : 0;
6272 Adapter->param_lp_100t4 =
6273 (Adapter->phy_lp_able & NWAY_LPAR_100T4_CAPS) ? 1 : 0;
6274 Adapter->param_lp_100fdx =
6275 (Adapter->phy_lp_able & NWAY_LPAR_100TX_FD_CAPS) ? 1 : 0;
6276 Adapter->param_lp_100hdx =
6277 (Adapter->phy_lp_able & NWAY_LPAR_100TX_HD_CAPS) ? 1 : 0;
6278 Adapter->param_lp_10fdx =
6279 (Adapter->phy_lp_able & NWAY_LPAR_10T_FD_CAPS) ? 1 : 0;
6280 Adapter->param_lp_10hdx =
6281 (Adapter->phy_lp_able & NWAY_LPAR_10T_HD_CAPS) ? 1 : 0;
6282 } else {
6283 /*
6284 * 1Gig Fiber adapter only offers 1Gig Full Duplex. Meaning,
6285 * it can only work with 1Gig Full Duplex Link Partner.
6286 */
6287 Adapter->param_autoneg_cap = 0;
6288 Adapter->param_pause_cap = 1;
6289 Adapter->param_asym_pause_cap = 1;
6290 Adapter->param_1000fdx_cap = 1;
6291 Adapter->param_1000hdx_cap = 0;
6292 Adapter->param_100t4_cap = 0;
6293 Adapter->param_100fdx_cap = 0;
6294 Adapter->param_100hdx_cap = 0;
6295 Adapter->param_10fdx_cap = 0;
6296 Adapter->param_10hdx_cap = 0;
6297
6298 Adapter->param_adv_autoneg = 0;
6299 Adapter->param_adv_pause = 1;
6300 Adapter->param_adv_asym_pause = 1;
6301 Adapter->param_adv_1000fdx = 1;
6302 Adapter->param_adv_1000hdx = 0;
6303 Adapter->param_adv_100t4 = 0;
6304 Adapter->param_adv_100fdx = 0;
6305 Adapter->param_adv_100hdx = 0;
6306 Adapter->param_adv_10fdx = 0;
6307 Adapter->param_adv_10hdx = 0;
6308
6309 Adapter->param_lp_autoneg = 0;
6310 Adapter->param_lp_pause = 0;
6311 Adapter->param_lp_asym_pause = 0;
6312 Adapter->param_lp_1000fdx = 0;
6313 Adapter->param_lp_1000hdx = 0;
6314 Adapter->param_lp_100t4 = 0;
6315 Adapter->param_lp_100fdx = 0;
6316 Adapter->param_lp_100hdx = 0;
6317 Adapter->param_lp_10fdx = 0;
6318 Adapter->param_lp_10hdx = 0;
6319 }
6320 }
6321
6322 /*
6323 * FMA support
6324 */
6325
6326 int
6327 e1000g_check_acc_handle(ddi_acc_handle_t handle)
6328 {
6329 ddi_fm_error_t de;
6330
6331 ddi_fm_acc_err_get(handle, &de, DDI_FME_VERSION);
6332 ddi_fm_acc_err_clear(handle, DDI_FME_VERSION);
6333 return (de.fme_status);
6334 }
6335
6336 int
6337 e1000g_check_dma_handle(ddi_dma_handle_t handle)
6338 {
6339 ddi_fm_error_t de;
6340
6341 ddi_fm_dma_err_get(handle, &de, DDI_FME_VERSION);
6342 return (de.fme_status);
6343 }
6344
6345 /*
6346 * The IO fault service error handling callback function
6347 */
6348 /* ARGSUSED2 */
6349 static int
6350 e1000g_fm_error_cb(dev_info_t *dip, ddi_fm_error_t *err, const void *impl_data)
6351 {
6352 /*
6353 * as the driver can always deal with an error in any dma or
6354 * access handle, we can just return the fme_status value.
6355 */
6356 pci_ereport_post(dip, err, NULL);
6357 return (err->fme_status);
6358 }
6359
6360 static void
6361 e1000g_fm_init(struct e1000g *Adapter)
6362 {
6363 ddi_iblock_cookie_t iblk;
6364 int fma_dma_flag;
6365
6366 /* Only register with IO Fault Services if we have some capability */
6367 if (Adapter->fm_capabilities & DDI_FM_ACCCHK_CAPABLE) {
6368 e1000g_regs_acc_attr.devacc_attr_access = DDI_FLAGERR_ACC;
6369 } else {
6370 e1000g_regs_acc_attr.devacc_attr_access = DDI_DEFAULT_ACC;
6371 }
6372
6373 if (Adapter->fm_capabilities & DDI_FM_DMACHK_CAPABLE) {
6374 fma_dma_flag = 1;
6375 } else {
6376 fma_dma_flag = 0;
6377 }
6378
6379 (void) e1000g_set_fma_flags(fma_dma_flag);
6380
6381 if (Adapter->fm_capabilities) {
6382
6383 /* Register capabilities with IO Fault Services */
6384 ddi_fm_init(Adapter->dip, &Adapter->fm_capabilities, &iblk);
6385
6386 /*
6387 * Initialize pci ereport capabilities if ereport capable
6388 */
6389 if (DDI_FM_EREPORT_CAP(Adapter->fm_capabilities) ||
6390 DDI_FM_ERRCB_CAP(Adapter->fm_capabilities))
6391 pci_ereport_setup(Adapter->dip);
6392
6393 /*
6394 * Register error callback if error callback capable
6395 */
6396 if (DDI_FM_ERRCB_CAP(Adapter->fm_capabilities))
6397 ddi_fm_handler_register(Adapter->dip,
6398 e1000g_fm_error_cb, (void*) Adapter);
6399 }
6400 }
6401
6402 static void
6403 e1000g_fm_fini(struct e1000g *Adapter)
6404 {
6405 /* Only unregister FMA capabilities if we registered some */
6406 if (Adapter->fm_capabilities) {
6407
6408 /*
6409 * Release any resources allocated by pci_ereport_setup()
6410 */
6411 if (DDI_FM_EREPORT_CAP(Adapter->fm_capabilities) ||
6412 DDI_FM_ERRCB_CAP(Adapter->fm_capabilities))
6413 pci_ereport_teardown(Adapter->dip);
6414
6415 /*
6416 * Un-register error callback if error callback capable
6417 */
6418 if (DDI_FM_ERRCB_CAP(Adapter->fm_capabilities))
6419 ddi_fm_handler_unregister(Adapter->dip);
6420
6421 /* Unregister from IO Fault Services */
6422 mutex_enter(&e1000g_rx_detach_lock);
6423 ddi_fm_fini(Adapter->dip);
6424 if (Adapter->priv_dip != NULL) {
6425 DEVI(Adapter->priv_dip)->devi_fmhdl = NULL;
6426 }
6427 mutex_exit(&e1000g_rx_detach_lock);
6428 }
6429 }
6430
6431 void
6432 e1000g_fm_ereport(struct e1000g *Adapter, char *detail)
6433 {
6434 uint64_t ena;
6435 char buf[FM_MAX_CLASS];
6436
6437 (void) snprintf(buf, FM_MAX_CLASS, "%s.%s", DDI_FM_DEVICE, detail);
6438 ena = fm_ena_generate(0, FM_ENA_FMT1);
6439 if (DDI_FM_EREPORT_CAP(Adapter->fm_capabilities)) {
6440 ddi_fm_ereport_post(Adapter->dip, buf, ena, DDI_NOSLEEP,
6441 FM_VERSION, DATA_TYPE_UINT8, FM_EREPORT_VERS0, NULL);
6442 }
6443 }
6444
6445 /*
6446 * quiesce(9E) entry point.
6447 *
6448 * This function is called when the system is single-threaded at high
6449 * PIL with preemption disabled. Therefore, this function must not be
6450 * blocked.
6451 *
6452 * This function returns DDI_SUCCESS on success, or DDI_FAILURE on failure.
6453 * DDI_FAILURE indicates an error condition and should almost never happen.
6454 */
6455 static int
6456 e1000g_quiesce(dev_info_t *devinfo)
6457 {
6458 struct e1000g *Adapter;
6459
6460 Adapter = (struct e1000g *)ddi_get_driver_private(devinfo);
6461
6462 if (Adapter == NULL)
6463 return (DDI_FAILURE);
6464
6465 e1000g_clear_all_interrupts(Adapter);
6466
6467 (void) e1000_reset_hw(&Adapter->shared);
6468
6469 /* Setup our HW Tx Head & Tail descriptor pointers */
6470 E1000_WRITE_REG(&Adapter->shared, E1000_TDH(0), 0);
6471 E1000_WRITE_REG(&Adapter->shared, E1000_TDT(0), 0);
6472
6473 /* Setup our HW Rx Head & Tail descriptor pointers */
6474 E1000_WRITE_REG(&Adapter->shared, E1000_RDH(0), 0);
6475 E1000_WRITE_REG(&Adapter->shared, E1000_RDT(0), 0);
6476
6477 return (DDI_SUCCESS);
6478 }
6479
6480 /*
6481 * synchronize the adv* and en* parameters.
6482 *
6483 * See comments in <sys/dld.h> for details of the *_en_*
6484 * parameters. The usage of ndd for setting adv parameters will
6485 * synchronize all the en parameters with the e1000g parameters,
6486 * implicitly disabling any settings made via dladm.
6487 */
6488 static void
6489 e1000g_param_sync(struct e1000g *Adapter)
6490 {
6491 Adapter->param_en_1000fdx = Adapter->param_adv_1000fdx;
6492 Adapter->param_en_1000hdx = Adapter->param_adv_1000hdx;
6493 Adapter->param_en_100fdx = Adapter->param_adv_100fdx;
6494 Adapter->param_en_100hdx = Adapter->param_adv_100hdx;
6495 Adapter->param_en_10fdx = Adapter->param_adv_10fdx;
6496 Adapter->param_en_10hdx = Adapter->param_adv_10hdx;
6497 }
6498
6499 /*
6500 * e1000g_get_driver_control - tell manageability firmware that the driver
6501 * has control.
6502 */
6503 static void
6504 e1000g_get_driver_control(struct e1000_hw *hw)
6505 {
6506 uint32_t ctrl_ext;
6507 uint32_t swsm;
6508
6509 /* tell manageability firmware the driver has taken over */
6510 switch (hw->mac.type) {
6511 case e1000_82573:
6512 swsm = E1000_READ_REG(hw, E1000_SWSM);
6513 E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_DRV_LOAD);
6514 break;
6515 case e1000_82571:
6516 case e1000_82572:
6517 case e1000_82574:
6518 case e1000_80003es2lan:
6519 case e1000_ich8lan:
6520 case e1000_ich9lan:
6521 case e1000_ich10lan:
6522 case e1000_pchlan:
6523 case e1000_pch2lan:
6524 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
6525 E1000_WRITE_REG(hw, E1000_CTRL_EXT,
6526 ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
6527 break;
6528 default:
6529 /* no manageability firmware: do nothing */
6530 break;
6531 }
6532 }
6533
6534 /*
6535 * e1000g_release_driver_control - tell manageability firmware that the driver
6536 * has released control.
6537 */
6538 static void
6539 e1000g_release_driver_control(struct e1000_hw *hw)
6540 {
6541 uint32_t ctrl_ext;
6542 uint32_t swsm;
6543
6544 /* tell manageability firmware the driver has released control */
6545 switch (hw->mac.type) {
6546 case e1000_82573:
6547 swsm = E1000_READ_REG(hw, E1000_SWSM);
6548 E1000_WRITE_REG(hw, E1000_SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
6549 break;
6550 case e1000_82571:
6551 case e1000_82572:
6552 case e1000_82574:
6553 case e1000_80003es2lan:
6554 case e1000_ich8lan:
6555 case e1000_ich9lan:
6556 case e1000_ich10lan:
6557 case e1000_pchlan:
6558 case e1000_pch2lan:
6559 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
6560 E1000_WRITE_REG(hw, E1000_CTRL_EXT,
6561 ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
6562 break;
6563 default:
6564 /* no manageability firmware: do nothing */
6565 break;
6566 }
6567 }
6568
6569 /*
6570 * Restore e1000g promiscuous mode.
6571 */
6572 static void
6573 e1000g_restore_promisc(struct e1000g *Adapter)
6574 {
6575 if (Adapter->e1000g_promisc) {
6576 uint32_t rctl;
6577
6578 rctl = E1000_READ_REG(&Adapter->shared, E1000_RCTL);
6579 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_BAM);
6580 E1000_WRITE_REG(&Adapter->shared, E1000_RCTL, rctl);
6581 }
6582 }
--- EOF ---