1 /******************************************************************************
2 *
3 * Module Name: exstore - AML Interpreter object store support
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2011, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
45
46 #include "acpi.h"
47 #include "accommon.h"
48 #include "acdispat.h"
49 #include "acinterp.h"
50 #include "amlcode.h"
51 #include "acnamesp.h"
52
53
54 #define _COMPONENT ACPI_EXECUTER
55 ACPI_MODULE_NAME ("exstore")
56
57 /* Local prototypes */
58
59 static ACPI_STATUS
60 AcpiExStoreObjectToIndex (
61 ACPI_OPERAND_OBJECT *ValDesc,
62 ACPI_OPERAND_OBJECT *DestDesc,
63 ACPI_WALK_STATE *WalkState);
64
65
66 /*******************************************************************************
67 *
68 * FUNCTION: AcpiExStore
69 *
70 * PARAMETERS: *SourceDesc - Value to be stored
71 * *DestDesc - Where to store it. Must be an NS node
72 * or an ACPI_OPERAND_OBJECT of type
73 * Reference;
74 * WalkState - Current walk state
75 *
76 * RETURN: Status
77 *
78 * DESCRIPTION: Store the value described by SourceDesc into the location
79 * described by DestDesc. Called by various interpreter
80 * functions to store the result of an operation into
81 * the destination operand -- not just simply the actual "Store"
82 * ASL operator.
83 *
84 ******************************************************************************/
85
86 ACPI_STATUS
87 AcpiExStore (
88 ACPI_OPERAND_OBJECT *SourceDesc,
89 ACPI_OPERAND_OBJECT *DestDesc,
90 ACPI_WALK_STATE *WalkState)
91 {
92 ACPI_STATUS Status = AE_OK;
107 /* DestDesc can be either a namespace node or an ACPI object */
108
109 if (ACPI_GET_DESCRIPTOR_TYPE (DestDesc) == ACPI_DESC_TYPE_NAMED)
110 {
111 /*
112 * Dest is a namespace node,
113 * Storing an object into a Named node.
114 */
115 Status = AcpiExStoreObjectToNode (SourceDesc,
116 (ACPI_NAMESPACE_NODE *) DestDesc, WalkState,
117 ACPI_IMPLICIT_CONVERSION);
118
119 return_ACPI_STATUS (Status);
120 }
121
122 /* Destination object must be a Reference or a Constant object */
123
124 switch (DestDesc->Common.Type)
125 {
126 case ACPI_TYPE_LOCAL_REFERENCE:
127 break;
128
129 case ACPI_TYPE_INTEGER:
130
131 /* Allow stores to Constants -- a Noop as per ACPI spec */
132
133 if (DestDesc->Common.Flags & AOPOBJ_AML_CONSTANT)
134 {
135 return_ACPI_STATUS (AE_OK);
136 }
137
138 /*lint -fallthrough */
139
140 default:
141
142 /* Destination is not a Reference object */
143
144 ACPI_ERROR ((AE_INFO,
145 "Target is not a Reference or Constant object - %s [%p]",
146 AcpiUtGetObjectTypeName (DestDesc), DestDesc));
150
151 /*
152 * Examine the Reference class. These cases are handled:
153 *
154 * 1) Store to Name (Change the object associated with a name)
155 * 2) Store to an indexed area of a Buffer or Package
156 * 3) Store to a Method Local or Arg
157 * 4) Store to the debug object
158 */
159 switch (RefDesc->Reference.Class)
160 {
161 case ACPI_REFCLASS_REFOF:
162
163 /* Storing an object into a Name "container" */
164
165 Status = AcpiExStoreObjectToNode (SourceDesc,
166 RefDesc->Reference.Object,
167 WalkState, ACPI_IMPLICIT_CONVERSION);
168 break;
169
170
171 case ACPI_REFCLASS_INDEX:
172
173 /* Storing to an Index (pointer into a packager or buffer) */
174
175 Status = AcpiExStoreObjectToIndex (SourceDesc, RefDesc, WalkState);
176 break;
177
178
179 case ACPI_REFCLASS_LOCAL:
180 case ACPI_REFCLASS_ARG:
181
182 /* Store to a method local/arg */
183
184 Status = AcpiDsStoreObjectToLocal (RefDesc->Reference.Class,
185 RefDesc->Reference.Value, SourceDesc, WalkState);
186 break;
187
188
189 case ACPI_REFCLASS_DEBUG:
190
191 /*
192 * Storing to the Debug object causes the value stored to be
193 * displayed and otherwise has no effect -- see ACPI Specification
194 */
195 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
196 "**** Write to Debug Object: Object %p %s ****:\n\n",
197 SourceDesc, AcpiUtGetObjectTypeName (SourceDesc)));
198
199 ACPI_DEBUG_OBJECT (SourceDesc, 0, 0);
200 break;
201
202
203 default:
204
205 ACPI_ERROR ((AE_INFO, "Unknown Reference Class 0x%2.2X",
206 RefDesc->Reference.Class));
207 ACPI_DUMP_ENTRY (RefDesc, ACPI_LV_INFO);
208
209 Status = AE_AML_INTERNAL;
210 break;
211 }
212
213 return_ACPI_STATUS (Status);
214 }
215
216
217 /*******************************************************************************
218 *
219 * FUNCTION: AcpiExStoreObjectToIndex
220 *
221 * PARAMETERS: *SourceDesc - Value to be stored
222 * *DestDesc - Named object to receive the value
291 i++)
292 {
293 AcpiUtRemoveReference (ObjDesc);
294 }
295 }
296
297 *(IndexDesc->Reference.Where) = NewDesc;
298
299 /* Increment ref count by the ref count of the parent package-1 */
300
301 for (i = 1;
302 i < ((ACPI_OPERAND_OBJECT *)
303 IndexDesc->Reference.Object)->Common.ReferenceCount;
304 i++)
305 {
306 AcpiUtAddReference (NewDesc);
307 }
308
309 break;
310
311
312 case ACPI_TYPE_BUFFER_FIELD:
313
314 /*
315 * Store into a Buffer or String (not actually a real BufferField)
316 * at a location defined by an Index.
317 *
318 * The first 8-bit element of the source object is written to the
319 * 8-bit Buffer location defined by the Index destination object,
320 * according to the ACPI 2.0 specification.
321 */
322
323 /*
324 * Make sure the target is a Buffer or String. An error should
325 * not happen here, since the ReferenceObject was constructed
326 * by the INDEX_OP code.
327 */
328 ObjDesc = IndexDesc->Reference.Object;
329 if ((ObjDesc->Common.Type != ACPI_TYPE_BUFFER) &&
330 (ObjDesc->Common.Type != ACPI_TYPE_STRING))
331 {
332 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
333 }
351 /* Note: Takes advantage of common string/buffer fields */
352
353 Value = SourceDesc->Buffer.Pointer[0];
354 break;
355
356 default:
357
358 /* All other types are invalid */
359
360 ACPI_ERROR ((AE_INFO,
361 "Source must be Integer/Buffer/String type, not %s",
362 AcpiUtGetObjectTypeName (SourceDesc)));
363 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
364 }
365
366 /* Store the source value into the target buffer byte */
367
368 ObjDesc->Buffer.Pointer[IndexDesc->Reference.Value] = Value;
369 break;
370
371
372 default:
373 ACPI_ERROR ((AE_INFO,
374 "Target is not a Package or BufferField"));
375 Status = AE_AML_OPERAND_TYPE;
376 break;
377 }
378
379 return_ACPI_STATUS (Status);
380 }
381
382
383 /*******************************************************************************
384 *
385 * FUNCTION: AcpiExStoreObjectToNode
386 *
387 * PARAMETERS: SourceDesc - Value to be stored
388 * Node - Named object to receive the value
389 * WalkState - Current walk state
390 * ImplicitConversion - Perform implicit conversion (yes/no)
391 *
392 * RETURN: Status
393 *
394 * DESCRIPTION: Store the object to the named object.
395 *
396 * The Assignment of an object to a named object is handled here
397 * The value passed in will replace the current value (if any)
398 * with the input value.
399 *
400 * When storing into an object the data is converted to the
401 * target object type then stored in the object. This means
402 * that the target object type (for an initialized target) will
403 * not be changed by a store operation.
404 *
405 * Assumes parameters are already validated.
406 *
407 ******************************************************************************/
408
409 ACPI_STATUS
410 AcpiExStoreObjectToNode (
411 ACPI_OPERAND_OBJECT *SourceDesc,
412 ACPI_NAMESPACE_NODE *Node,
413 ACPI_WALK_STATE *WalkState,
414 UINT8 ImplicitConversion)
415 {
416 ACPI_STATUS Status = AE_OK;
417 ACPI_OPERAND_OBJECT *TargetDesc;
418 ACPI_OPERAND_OBJECT *NewDesc;
419 ACPI_OBJECT_TYPE TargetType;
420
421
422 ACPI_FUNCTION_TRACE_PTR (ExStoreObjectToNode, SourceDesc);
423
424
425 /* Get current type of the node, and object attached to Node */
426
427 TargetType = AcpiNsGetType (Node);
428 TargetDesc = AcpiNsGetAttachedObject (Node);
429
430 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Storing %p(%s) into node %p(%s)\n",
431 SourceDesc, AcpiUtGetObjectTypeName (SourceDesc),
432 Node, AcpiUtGetTypeName (TargetType)));
433
434 /*
435 * Resolve the source object to an actual value
436 * (If it is a reference object)
437 */
438 Status = AcpiExResolveObject (&SourceDesc, TargetType, WalkState);
439 if (ACPI_FAILURE (Status))
440 {
441 return_ACPI_STATUS (Status);
442 }
443
444 /* If no implicit conversion, drop into the default case below */
445
446 if ((!ImplicitConversion) ||
447 ((WalkState->Opcode == AML_COPY_OP) &&
448 (TargetType != ACPI_TYPE_LOCAL_REGION_FIELD) &&
449 (TargetType != ACPI_TYPE_LOCAL_BANK_FIELD) &&
450 (TargetType != ACPI_TYPE_LOCAL_INDEX_FIELD)))
451 {
452 /*
453 * Force execution of default (no implicit conversion). Note:
454 * CopyObject does not perform an implicit conversion, as per the ACPI
455 * spec -- except in case of region/bank/index fields -- because these
456 * objects must retain their original type permanently.
457 */
458 TargetType = ACPI_TYPE_ANY;
459 }
460
461 /* Do the actual store operation */
462
463 switch (TargetType)
464 {
465 case ACPI_TYPE_BUFFER_FIELD:
466 case ACPI_TYPE_LOCAL_REGION_FIELD:
467 case ACPI_TYPE_LOCAL_BANK_FIELD:
468 case ACPI_TYPE_LOCAL_INDEX_FIELD:
469
470 /* For fields, copy the source data to the target field. */
471
472 Status = AcpiExWriteDataToField (SourceDesc, TargetDesc,
473 &WalkState->ResultObj);
474 break;
475
476
477 case ACPI_TYPE_INTEGER:
478 case ACPI_TYPE_STRING:
479 case ACPI_TYPE_BUFFER:
480
481 /*
482 * These target types are all of type Integer/String/Buffer, and
483 * therefore support implicit conversion before the store.
484 *
485 * Copy and/or convert the source object to a new target object
486 */
487 Status = AcpiExStoreObjectToObject (SourceDesc, TargetDesc,
488 &NewDesc, WalkState);
489 if (ACPI_FAILURE (Status))
490 {
491 return_ACPI_STATUS (Status);
492 }
493
494 if (NewDesc != TargetDesc)
495 {
496 /*
497 * Store the new NewDesc as the new value of the Name, and set
498 * the Name's type to that of the value being stored in it.
499 * SourceDesc reference count is incremented by AttachObject.
500 *
501 * Note: This may change the type of the node if an explicit store
502 * has been performed such that the node/object type has been
503 * changed.
504 */
505 Status = AcpiNsAttachObject (Node, NewDesc, NewDesc->Common.Type);
506
507 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
508 "Store %s into %s via Convert/Attach\n",
509 AcpiUtGetObjectTypeName (SourceDesc),
510 AcpiUtGetObjectTypeName (NewDesc)));
511 }
512 break;
513
514
515 default:
516
517 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
518 "Storing %s (%p) directly into node (%p) with no implicit conversion\n",
519 AcpiUtGetObjectTypeName (SourceDesc), SourceDesc, Node));
520
521 /* No conversions for all other types. Just attach the source object */
522
523 Status = AcpiNsAttachObject (Node, SourceDesc,
524 SourceDesc->Common.Type);
525 break;
526 }
527
528 return_ACPI_STATUS (Status);
529 }
530
531
|
1 /******************************************************************************
2 *
3 * Module Name: exstore - AML Interpreter object store support
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2014, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
45
46 #include "acpi.h"
47 #include "accommon.h"
48 #include "acdispat.h"
49 #include "acinterp.h"
50 #include "amlcode.h"
51 #include "acnamesp.h"
52
53
54 #define _COMPONENT ACPI_EXECUTER
55 ACPI_MODULE_NAME ("exstore")
56
57 /* Local prototypes */
58
59 static ACPI_STATUS
60 AcpiExStoreObjectToIndex (
61 ACPI_OPERAND_OBJECT *ValDesc,
62 ACPI_OPERAND_OBJECT *DestDesc,
63 ACPI_WALK_STATE *WalkState);
64
65 static ACPI_STATUS
66 AcpiExStoreDirectToNode (
67 ACPI_OPERAND_OBJECT *SourceDesc,
68 ACPI_NAMESPACE_NODE *Node,
69 ACPI_WALK_STATE *WalkState);
70
71
72 /*******************************************************************************
73 *
74 * FUNCTION: AcpiExStore
75 *
76 * PARAMETERS: *SourceDesc - Value to be stored
77 * *DestDesc - Where to store it. Must be an NS node
78 * or ACPI_OPERAND_OBJECT of type
79 * Reference;
80 * WalkState - Current walk state
81 *
82 * RETURN: Status
83 *
84 * DESCRIPTION: Store the value described by SourceDesc into the location
85 * described by DestDesc. Called by various interpreter
86 * functions to store the result of an operation into
87 * the destination operand -- not just simply the actual "Store"
88 * ASL operator.
89 *
90 ******************************************************************************/
91
92 ACPI_STATUS
93 AcpiExStore (
94 ACPI_OPERAND_OBJECT *SourceDesc,
95 ACPI_OPERAND_OBJECT *DestDesc,
96 ACPI_WALK_STATE *WalkState)
97 {
98 ACPI_STATUS Status = AE_OK;
113 /* DestDesc can be either a namespace node or an ACPI object */
114
115 if (ACPI_GET_DESCRIPTOR_TYPE (DestDesc) == ACPI_DESC_TYPE_NAMED)
116 {
117 /*
118 * Dest is a namespace node,
119 * Storing an object into a Named node.
120 */
121 Status = AcpiExStoreObjectToNode (SourceDesc,
122 (ACPI_NAMESPACE_NODE *) DestDesc, WalkState,
123 ACPI_IMPLICIT_CONVERSION);
124
125 return_ACPI_STATUS (Status);
126 }
127
128 /* Destination object must be a Reference or a Constant object */
129
130 switch (DestDesc->Common.Type)
131 {
132 case ACPI_TYPE_LOCAL_REFERENCE:
133
134 break;
135
136 case ACPI_TYPE_INTEGER:
137
138 /* Allow stores to Constants -- a Noop as per ACPI spec */
139
140 if (DestDesc->Common.Flags & AOPOBJ_AML_CONSTANT)
141 {
142 return_ACPI_STATUS (AE_OK);
143 }
144
145 /*lint -fallthrough */
146
147 default:
148
149 /* Destination is not a Reference object */
150
151 ACPI_ERROR ((AE_INFO,
152 "Target is not a Reference or Constant object - %s [%p]",
153 AcpiUtGetObjectTypeName (DestDesc), DestDesc));
157
158 /*
159 * Examine the Reference class. These cases are handled:
160 *
161 * 1) Store to Name (Change the object associated with a name)
162 * 2) Store to an indexed area of a Buffer or Package
163 * 3) Store to a Method Local or Arg
164 * 4) Store to the debug object
165 */
166 switch (RefDesc->Reference.Class)
167 {
168 case ACPI_REFCLASS_REFOF:
169
170 /* Storing an object into a Name "container" */
171
172 Status = AcpiExStoreObjectToNode (SourceDesc,
173 RefDesc->Reference.Object,
174 WalkState, ACPI_IMPLICIT_CONVERSION);
175 break;
176
177 case ACPI_REFCLASS_INDEX:
178
179 /* Storing to an Index (pointer into a packager or buffer) */
180
181 Status = AcpiExStoreObjectToIndex (SourceDesc, RefDesc, WalkState);
182 break;
183
184 case ACPI_REFCLASS_LOCAL:
185 case ACPI_REFCLASS_ARG:
186
187 /* Store to a method local/arg */
188
189 Status = AcpiDsStoreObjectToLocal (RefDesc->Reference.Class,
190 RefDesc->Reference.Value, SourceDesc, WalkState);
191 break;
192
193 case ACPI_REFCLASS_DEBUG:
194 /*
195 * Storing to the Debug object causes the value stored to be
196 * displayed and otherwise has no effect -- see ACPI Specification
197 */
198 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
199 "**** Write to Debug Object: Object %p %s ****:\n\n",
200 SourceDesc, AcpiUtGetObjectTypeName (SourceDesc)));
201
202 ACPI_DEBUG_OBJECT (SourceDesc, 0, 0);
203 break;
204
205 default:
206
207 ACPI_ERROR ((AE_INFO, "Unknown Reference Class 0x%2.2X",
208 RefDesc->Reference.Class));
209 ACPI_DUMP_ENTRY (RefDesc, ACPI_LV_INFO);
210
211 Status = AE_AML_INTERNAL;
212 break;
213 }
214
215 return_ACPI_STATUS (Status);
216 }
217
218
219 /*******************************************************************************
220 *
221 * FUNCTION: AcpiExStoreObjectToIndex
222 *
223 * PARAMETERS: *SourceDesc - Value to be stored
224 * *DestDesc - Named object to receive the value
293 i++)
294 {
295 AcpiUtRemoveReference (ObjDesc);
296 }
297 }
298
299 *(IndexDesc->Reference.Where) = NewDesc;
300
301 /* Increment ref count by the ref count of the parent package-1 */
302
303 for (i = 1;
304 i < ((ACPI_OPERAND_OBJECT *)
305 IndexDesc->Reference.Object)->Common.ReferenceCount;
306 i++)
307 {
308 AcpiUtAddReference (NewDesc);
309 }
310
311 break;
312
313 case ACPI_TYPE_BUFFER_FIELD:
314 /*
315 * Store into a Buffer or String (not actually a real BufferField)
316 * at a location defined by an Index.
317 *
318 * The first 8-bit element of the source object is written to the
319 * 8-bit Buffer location defined by the Index destination object,
320 * according to the ACPI 2.0 specification.
321 */
322
323 /*
324 * Make sure the target is a Buffer or String. An error should
325 * not happen here, since the ReferenceObject was constructed
326 * by the INDEX_OP code.
327 */
328 ObjDesc = IndexDesc->Reference.Object;
329 if ((ObjDesc->Common.Type != ACPI_TYPE_BUFFER) &&
330 (ObjDesc->Common.Type != ACPI_TYPE_STRING))
331 {
332 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
333 }
351 /* Note: Takes advantage of common string/buffer fields */
352
353 Value = SourceDesc->Buffer.Pointer[0];
354 break;
355
356 default:
357
358 /* All other types are invalid */
359
360 ACPI_ERROR ((AE_INFO,
361 "Source must be Integer/Buffer/String type, not %s",
362 AcpiUtGetObjectTypeName (SourceDesc)));
363 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
364 }
365
366 /* Store the source value into the target buffer byte */
367
368 ObjDesc->Buffer.Pointer[IndexDesc->Reference.Value] = Value;
369 break;
370
371 default:
372 ACPI_ERROR ((AE_INFO,
373 "Target is not a Package or BufferField"));
374 Status = AE_AML_OPERAND_TYPE;
375 break;
376 }
377
378 return_ACPI_STATUS (Status);
379 }
380
381
382 /*******************************************************************************
383 *
384 * FUNCTION: AcpiExStoreObjectToNode
385 *
386 * PARAMETERS: SourceDesc - Value to be stored
387 * Node - Named object to receive the value
388 * WalkState - Current walk state
389 * ImplicitConversion - Perform implicit conversion (yes/no)
390 *
391 * RETURN: Status
392 *
393 * DESCRIPTION: Store the object to the named object.
394 *
395 * The Assignment of an object to a named object is handled here
396 * The value passed in will replace the current value (if any)
397 * with the input value.
398 *
399 * When storing into an object the data is converted to the
400 * target object type then stored in the object. This means
401 * that the target object type (for an initialized target) will
402 * not be changed by a store operation. A CopyObject can change
403 * the target type, however.
404 *
405 * The ImplicitConversion flag is set to NO/FALSE only when
406 * storing to an ArgX -- as per the rules of the ACPI spec.
407 *
408 * Assumes parameters are already validated.
409 *
410 ******************************************************************************/
411
412 ACPI_STATUS
413 AcpiExStoreObjectToNode (
414 ACPI_OPERAND_OBJECT *SourceDesc,
415 ACPI_NAMESPACE_NODE *Node,
416 ACPI_WALK_STATE *WalkState,
417 UINT8 ImplicitConversion)
418 {
419 ACPI_STATUS Status = AE_OK;
420 ACPI_OPERAND_OBJECT *TargetDesc;
421 ACPI_OPERAND_OBJECT *NewDesc;
422 ACPI_OBJECT_TYPE TargetType;
423
424
425 ACPI_FUNCTION_TRACE_PTR (ExStoreObjectToNode, SourceDesc);
426
427
428 /* Get current type of the node, and object attached to Node */
429
430 TargetType = AcpiNsGetType (Node);
431 TargetDesc = AcpiNsGetAttachedObject (Node);
432
433 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Storing %p (%s) to node %p (%s)\n",
434 SourceDesc, AcpiUtGetObjectTypeName (SourceDesc),
435 Node, AcpiUtGetTypeName (TargetType)));
436
437 /*
438 * Resolve the source object to an actual value
439 * (If it is a reference object)
440 */
441 Status = AcpiExResolveObject (&SourceDesc, TargetType, WalkState);
442 if (ACPI_FAILURE (Status))
443 {
444 return_ACPI_STATUS (Status);
445 }
446
447 /* Do the actual store operation */
448
449 switch (TargetType)
450 {
451 case ACPI_TYPE_INTEGER:
452 case ACPI_TYPE_STRING:
453 case ACPI_TYPE_BUFFER:
454 /*
455 * The simple data types all support implicit source operand
456 * conversion before the store.
457 */
458
459 if ((WalkState->Opcode == AML_COPY_OP) ||
460 !ImplicitConversion)
461 {
462 /*
463 * However, CopyObject and Stores to ArgX do not perform
464 * an implicit conversion, as per the ACPI specification.
465 * A direct store is performed instead.
466 */
467 Status = AcpiExStoreDirectToNode (SourceDesc, Node,
468 WalkState);
469 break;
470 }
471
472 /* Store with implicit source operand conversion support */
473
474 Status = AcpiExStoreObjectToObject (SourceDesc, TargetDesc,
475 &NewDesc, WalkState);
476 if (ACPI_FAILURE (Status))
477 {
478 return_ACPI_STATUS (Status);
479 }
480
481 if (NewDesc != TargetDesc)
482 {
483 /*
484 * Store the new NewDesc as the new value of the Name, and set
485 * the Name's type to that of the value being stored in it.
486 * SourceDesc reference count is incremented by AttachObject.
487 *
488 * Note: This may change the type of the node if an explicit
489 * store has been performed such that the node/object type
490 * has been changed.
491 */
492 Status = AcpiNsAttachObject (Node, NewDesc,
493 NewDesc->Common.Type);
494
495 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
496 "Store %s into %s via Convert/Attach\n",
497 AcpiUtGetObjectTypeName (SourceDesc),
498 AcpiUtGetObjectTypeName (NewDesc)));
499 }
500 break;
501
502 case ACPI_TYPE_BUFFER_FIELD:
503 case ACPI_TYPE_LOCAL_REGION_FIELD:
504 case ACPI_TYPE_LOCAL_BANK_FIELD:
505 case ACPI_TYPE_LOCAL_INDEX_FIELD:
506 /*
507 * For all fields, always write the source data to the target
508 * field. Any required implicit source operand conversion is
509 * performed in the function below as necessary. Note, field
510 * objects must retain their original type permanently.
511 */
512 Status = AcpiExWriteDataToField (SourceDesc, TargetDesc,
513 &WalkState->ResultObj);
514 break;
515
516 default:
517 /*
518 * No conversions for all other types. Directly store a copy of
519 * the source object. This is the ACPI spec-defined behavior for
520 * the CopyObject operator.
521 *
522 * NOTE: For the Store operator, this is a departure from the
523 * ACPI spec, which states "If conversion is impossible, abort
524 * the running control method". Instead, this code implements
525 * "If conversion is impossible, treat the Store operation as
526 * a CopyObject".
527 */
528 Status = AcpiExStoreDirectToNode (SourceDesc, Node,
529 WalkState);
530 break;
531 }
532
533 return_ACPI_STATUS (Status);
534 }
535
536
537 /*******************************************************************************
538 *
539 * FUNCTION: AcpiExStoreDirectToNode
540 *
541 * PARAMETERS: SourceDesc - Value to be stored
542 * Node - Named object to receive the value
543 * WalkState - Current walk state
544 *
545 * RETURN: Status
546 *
547 * DESCRIPTION: "Store" an object directly to a node. This involves a copy
548 * and an attach.
549 *
550 ******************************************************************************/
551
552 static ACPI_STATUS
553 AcpiExStoreDirectToNode (
554 ACPI_OPERAND_OBJECT *SourceDesc,
555 ACPI_NAMESPACE_NODE *Node,
556 ACPI_WALK_STATE *WalkState)
557 {
558 ACPI_STATUS Status;
559 ACPI_OPERAND_OBJECT *NewDesc;
560
561
562 ACPI_FUNCTION_TRACE (ExStoreDirectToNode);
563
564
565 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
566 "Storing [%s] (%p) directly into node [%s] (%p)"
567 " with no implicit conversion\n",
568 AcpiUtGetObjectTypeName (SourceDesc), SourceDesc,
569 AcpiUtGetTypeName (Node->Type), Node));
570
571 /* Copy the source object to a new object */
572
573 Status = AcpiUtCopyIobjectToIobject (SourceDesc, &NewDesc, WalkState);
574 if (ACPI_FAILURE (Status))
575 {
576 return_ACPI_STATUS (Status);
577 }
578
579 /* Attach the new object to the node */
580
581 Status = AcpiNsAttachObject (Node, NewDesc, NewDesc->Common.Type);
582 AcpiUtRemoveReference (NewDesc);
583 return_ACPI_STATUS (Status);
584 }
|