1 /******************************************************************************
2 *
3 * Module Name: exresop - AML Interpreter operand/object resolution
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2014, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #define __EXRESOP_C__
45
46 #include "acpi.h"
47 #include "accommon.h"
48 #include "amlcode.h"
49 #include "acparser.h"
50 #include "acinterp.h"
51 #include "acnamesp.h"
52
53
54 #define _COMPONENT ACPI_EXECUTER
55 ACPI_MODULE_NAME ("exresop")
56
57 /* Local prototypes */
58
59 static ACPI_STATUS
60 AcpiExCheckObjectType (
61 ACPI_OBJECT_TYPE TypeNeeded,
62 ACPI_OBJECT_TYPE ThisType,
63 void *Object);
64
65
66 /*******************************************************************************
67 *
68 * FUNCTION: AcpiExCheckObjectType
69 *
70 * PARAMETERS: TypeNeeded Object type needed
71 * ThisType Actual object type
72 * Object Object pointer
73 *
74 * RETURN: Status
75 *
76 * DESCRIPTION: Check required type against actual type
77 *
78 ******************************************************************************/
79
80 static ACPI_STATUS
81 AcpiExCheckObjectType (
82 ACPI_OBJECT_TYPE TypeNeeded,
83 ACPI_OBJECT_TYPE ThisType,
84 void *Object)
85 {
86 ACPI_FUNCTION_ENTRY ();
87
88
89 if (TypeNeeded == ACPI_TYPE_ANY)
90 {
91 /* All types OK, so we don't perform any typechecks */
92
93 return (AE_OK);
94 }
95
96 if (TypeNeeded == ACPI_TYPE_LOCAL_REFERENCE)
97 {
98 /*
99 * Allow the AML "Constant" opcodes (Zero, One, etc.) to be reference
100 * objects and thus allow them to be targets. (As per the ACPI
101 * specification, a store to a constant is a noop.)
102 */
103 if ((ThisType == ACPI_TYPE_INTEGER) &&
104 (((ACPI_OPERAND_OBJECT *) Object)->Common.Flags & AOPOBJ_AML_CONSTANT))
105 {
106 return (AE_OK);
107 }
108 }
109
110 if (TypeNeeded != ThisType)
111 {
112 ACPI_ERROR ((AE_INFO,
113 "Needed type [%s], found [%s] %p",
114 AcpiUtGetTypeName (TypeNeeded),
115 AcpiUtGetTypeName (ThisType), Object));
116
117 return (AE_AML_OPERAND_TYPE);
118 }
119
120 return (AE_OK);
121 }
122
123
124 /*******************************************************************************
125 *
126 * FUNCTION: AcpiExResolveOperands
127 *
128 * PARAMETERS: Opcode - Opcode being interpreted
129 * StackPtr - Pointer to the operand stack to be
130 * resolved
131 * WalkState - Current state
132 *
133 * RETURN: Status
134 *
135 * DESCRIPTION: Convert multiple input operands to the types required by the
136 * target operator.
137 *
138 * Each 5-bit group in ArgTypes represents one required
139 * operand and indicates the required Type. The corresponding operand
140 * will be converted to the required type if possible, otherwise we
141 * abort with an exception.
142 *
143 ******************************************************************************/
144
145 ACPI_STATUS
146 AcpiExResolveOperands (
147 UINT16 Opcode,
148 ACPI_OPERAND_OBJECT **StackPtr,
149 ACPI_WALK_STATE *WalkState)
150 {
151 ACPI_OPERAND_OBJECT *ObjDesc;
152 ACPI_STATUS Status = AE_OK;
153 UINT8 ObjectType;
154 UINT32 ArgTypes;
155 const ACPI_OPCODE_INFO *OpInfo;
156 UINT32 ThisArgType;
157 ACPI_OBJECT_TYPE TypeNeeded;
158 UINT16 TargetOp = 0;
159
160
161 ACPI_FUNCTION_TRACE_U32 (ExResolveOperands, Opcode);
162
163
164 OpInfo = AcpiPsGetOpcodeInfo (Opcode);
165 if (OpInfo->Class == AML_CLASS_UNKNOWN)
166 {
167 return_ACPI_STATUS (AE_AML_BAD_OPCODE);
168 }
169
170 ArgTypes = OpInfo->RuntimeArgs;
171 if (ArgTypes == ARGI_INVALID_OPCODE)
172 {
173 ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
174 Opcode));
175
176 return_ACPI_STATUS (AE_AML_INTERNAL);
177 }
178
179 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
180 "Opcode %X [%s] RequiredOperandTypes=%8.8X\n",
181 Opcode, OpInfo->Name, ArgTypes));
182
183 /*
184 * Normal exit is with (ArgTypes == 0) at end of argument list.
185 * Function will return an exception from within the loop upon
186 * finding an entry which is not (or cannot be converted
187 * to) the required type; if stack underflows; or upon
188 * finding a NULL stack entry (which should not happen).
189 */
190 while (GET_CURRENT_ARG_TYPE (ArgTypes))
191 {
192 if (!StackPtr || !*StackPtr)
193 {
194 ACPI_ERROR ((AE_INFO, "Null stack entry at %p",
195 StackPtr));
196
197 return_ACPI_STATUS (AE_AML_INTERNAL);
198 }
199
200 /* Extract useful items */
201
202 ObjDesc = *StackPtr;
203
204 /* Decode the descriptor type */
205
206 switch (ACPI_GET_DESCRIPTOR_TYPE (ObjDesc))
207 {
208 case ACPI_DESC_TYPE_NAMED:
209
210 /* Namespace Node */
211
212 ObjectType = ((ACPI_NAMESPACE_NODE *) ObjDesc)->Type;
213
214 /*
215 * Resolve an alias object. The construction of these objects
216 * guarantees that there is only one level of alias indirection;
217 * thus, the attached object is always the aliased namespace node
218 */
219 if (ObjectType == ACPI_TYPE_LOCAL_ALIAS)
220 {
221 ObjDesc = AcpiNsGetAttachedObject ((ACPI_NAMESPACE_NODE *) ObjDesc);
222 *StackPtr = ObjDesc;
223 ObjectType = ((ACPI_NAMESPACE_NODE *) ObjDesc)->Type;
224 }
225 break;
226
227 case ACPI_DESC_TYPE_OPERAND:
228
229 /* ACPI internal object */
230
231 ObjectType = ObjDesc->Common.Type;
232
233 /* Check for bad ACPI_OBJECT_TYPE */
234
235 if (!AcpiUtValidObjectType (ObjectType))
236 {
237 ACPI_ERROR ((AE_INFO,
238 "Bad operand object type [0x%X]", ObjectType));
239
240 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
241 }
242
243 if (ObjectType == (UINT8) ACPI_TYPE_LOCAL_REFERENCE)
244 {
245 /* Validate the Reference */
246
247 switch (ObjDesc->Reference.Class)
248 {
249 case ACPI_REFCLASS_DEBUG:
250
251 TargetOp = AML_DEBUG_OP;
252
253 /*lint -fallthrough */
254
255 case ACPI_REFCLASS_ARG:
256 case ACPI_REFCLASS_LOCAL:
257 case ACPI_REFCLASS_INDEX:
258 case ACPI_REFCLASS_REFOF:
259 case ACPI_REFCLASS_TABLE: /* DdbHandle from LOAD_OP or LOAD_TABLE_OP */
260 case ACPI_REFCLASS_NAME: /* Reference to a named object */
261
262 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
263 "Operand is a Reference, Class [%s] %2.2X\n",
264 AcpiUtGetReferenceName (ObjDesc),
265 ObjDesc->Reference.Class));
266 break;
267
268 default:
269
270 ACPI_ERROR ((AE_INFO,
271 "Unknown Reference Class 0x%2.2X in %p",
272 ObjDesc->Reference.Class, ObjDesc));
273
274 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
275 }
276 }
277 break;
278
279 default:
280
281 /* Invalid descriptor */
282
283 ACPI_ERROR ((AE_INFO, "Invalid descriptor %p [%s]",
284 ObjDesc, AcpiUtGetDescriptorName (ObjDesc)));
285
286 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
287 }
288
289 /* Get one argument type, point to the next */
290
291 ThisArgType = GET_CURRENT_ARG_TYPE (ArgTypes);
292 INCREMENT_ARG_LIST (ArgTypes);
293
294 /*
295 * Handle cases where the object does not need to be
296 * resolved to a value
297 */
298 switch (ThisArgType)
299 {
300 case ARGI_REF_OR_STRING: /* Can be a String or Reference */
301
302 if ((ACPI_GET_DESCRIPTOR_TYPE (ObjDesc) == ACPI_DESC_TYPE_OPERAND) &&
303 (ObjDesc->Common.Type == ACPI_TYPE_STRING))
304 {
305 /*
306 * String found - the string references a named object and
307 * must be resolved to a node
308 */
309 goto NextOperand;
310 }
311
312 /*
313 * Else not a string - fall through to the normal Reference
314 * case below
315 */
316 /*lint -fallthrough */
317
318 case ARGI_REFERENCE: /* References: */
319 case ARGI_INTEGER_REF:
320 case ARGI_OBJECT_REF:
321 case ARGI_DEVICE_REF:
322 case ARGI_TARGETREF: /* Allows implicit conversion rules before store */
323 case ARGI_FIXED_TARGET: /* No implicit conversion before store to target */
324 case ARGI_SIMPLE_TARGET: /* Name, Local, or Arg - no implicit conversion */
325 /*
326 * Need an operand of type ACPI_TYPE_LOCAL_REFERENCE
327 * A Namespace Node is OK as-is
328 */
329 if (ACPI_GET_DESCRIPTOR_TYPE (ObjDesc) == ACPI_DESC_TYPE_NAMED)
330 {
331 goto NextOperand;
332 }
333
334 Status = AcpiExCheckObjectType (ACPI_TYPE_LOCAL_REFERENCE,
335 ObjectType, ObjDesc);
336 if (ACPI_FAILURE (Status))
337 {
338 return_ACPI_STATUS (Status);
339 }
340 goto NextOperand;
341
342 case ARGI_DATAREFOBJ: /* Store operator only */
343 /*
344 * We don't want to resolve IndexOp reference objects during
345 * a store because this would be an implicit DeRefOf operation.
346 * Instead, we just want to store the reference object.
347 * -- All others must be resolved below.
348 */
349 if ((Opcode == AML_STORE_OP) &&
350 ((*StackPtr)->Common.Type == ACPI_TYPE_LOCAL_REFERENCE) &&
351 ((*StackPtr)->Reference.Class == ACPI_REFCLASS_INDEX))
352 {
353 goto NextOperand;
354 }
355 break;
356
357 default:
358
359 /* All cases covered above */
360
361 break;
362 }
363
364 /*
365 * Resolve this object to a value
366 */
367 Status = AcpiExResolveToValue (StackPtr, WalkState);
368 if (ACPI_FAILURE (Status))
369 {
370 return_ACPI_STATUS (Status);
371 }
372
373 /* Get the resolved object */
374
375 ObjDesc = *StackPtr;
376
377 /*
378 * Check the resulting object (value) type
379 */
380 switch (ThisArgType)
381 {
382 /*
383 * For the simple cases, only one type of resolved object
384 * is allowed
385 */
386 case ARGI_MUTEX:
387
388 /* Need an operand of type ACPI_TYPE_MUTEX */
389
390 TypeNeeded = ACPI_TYPE_MUTEX;
391 break;
392
393 case ARGI_EVENT:
394
395 /* Need an operand of type ACPI_TYPE_EVENT */
396
397 TypeNeeded = ACPI_TYPE_EVENT;
398 break;
399
400 case ARGI_PACKAGE: /* Package */
401
402 /* Need an operand of type ACPI_TYPE_PACKAGE */
403
404 TypeNeeded = ACPI_TYPE_PACKAGE;
405 break;
406
407 case ARGI_ANYTYPE:
408
409 /* Any operand type will do */
410
411 TypeNeeded = ACPI_TYPE_ANY;
412 break;
413
414 case ARGI_DDBHANDLE:
415
416 /* Need an operand of type ACPI_TYPE_DDB_HANDLE */
417
418 TypeNeeded = ACPI_TYPE_LOCAL_REFERENCE;
419 break;
420
421
422 /*
423 * The more complex cases allow multiple resolved object types
424 */
425 case ARGI_INTEGER:
426
427 /*
428 * Need an operand of type ACPI_TYPE_INTEGER,
429 * But we can implicitly convert from a STRING or BUFFER
430 * Aka - "Implicit Source Operand Conversion"
431 */
432 Status = AcpiExConvertToInteger (ObjDesc, StackPtr, 16);
433 if (ACPI_FAILURE (Status))
434 {
435 if (Status == AE_TYPE)
436 {
437 ACPI_ERROR ((AE_INFO,
438 "Needed [Integer/String/Buffer], found [%s] %p",
439 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
440
441 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
442 }
443
444 return_ACPI_STATUS (Status);
445 }
446
447 if (ObjDesc != *StackPtr)
448 {
449 AcpiUtRemoveReference (ObjDesc);
450 }
451 goto NextOperand;
452
453 case ARGI_BUFFER:
454 /*
455 * Need an operand of type ACPI_TYPE_BUFFER,
456 * But we can implicitly convert from a STRING or INTEGER
457 * Aka - "Implicit Source Operand Conversion"
458 */
459 Status = AcpiExConvertToBuffer (ObjDesc, StackPtr);
460 if (ACPI_FAILURE (Status))
461 {
462 if (Status == AE_TYPE)
463 {
464 ACPI_ERROR ((AE_INFO,
465 "Needed [Integer/String/Buffer], found [%s] %p",
466 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
467
468 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
469 }
470
471 return_ACPI_STATUS (Status);
472 }
473
474 if (ObjDesc != *StackPtr)
475 {
476 AcpiUtRemoveReference (ObjDesc);
477 }
478 goto NextOperand;
479
480 case ARGI_STRING:
481 /*
482 * Need an operand of type ACPI_TYPE_STRING,
483 * But we can implicitly convert from a BUFFER or INTEGER
484 * Aka - "Implicit Source Operand Conversion"
485 */
486 Status = AcpiExConvertToString (ObjDesc, StackPtr,
487 ACPI_IMPLICIT_CONVERT_HEX);
488 if (ACPI_FAILURE (Status))
489 {
490 if (Status == AE_TYPE)
491 {
492 ACPI_ERROR ((AE_INFO,
493 "Needed [Integer/String/Buffer], found [%s] %p",
494 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
495
496 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
497 }
498
499 return_ACPI_STATUS (Status);
500 }
501
502 if (ObjDesc != *StackPtr)
503 {
504 AcpiUtRemoveReference (ObjDesc);
505 }
506 goto NextOperand;
507
508 case ARGI_COMPUTEDATA:
509
510 /* Need an operand of type INTEGER, STRING or BUFFER */
511
512 switch (ObjDesc->Common.Type)
513 {
514 case ACPI_TYPE_INTEGER:
515 case ACPI_TYPE_STRING:
516 case ACPI_TYPE_BUFFER:
517
518 /* Valid operand */
519 break;
520
521 default:
522 ACPI_ERROR ((AE_INFO,
523 "Needed [Integer/String/Buffer], found [%s] %p",
524 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
525
526 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
527 }
528 goto NextOperand;
529
530 case ARGI_BUFFER_OR_STRING:
531
532 /* Need an operand of type STRING or BUFFER */
533
534 switch (ObjDesc->Common.Type)
535 {
536 case ACPI_TYPE_STRING:
537 case ACPI_TYPE_BUFFER:
538
539 /* Valid operand */
540 break;
541
542 case ACPI_TYPE_INTEGER:
543
544 /* Highest priority conversion is to type Buffer */
545
546 Status = AcpiExConvertToBuffer (ObjDesc, StackPtr);
547 if (ACPI_FAILURE (Status))
548 {
549 return_ACPI_STATUS (Status);
550 }
551
552 if (ObjDesc != *StackPtr)
553 {
554 AcpiUtRemoveReference (ObjDesc);
555 }
556 break;
557
558 default:
559 ACPI_ERROR ((AE_INFO,
560 "Needed [Integer/String/Buffer], found [%s] %p",
561 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
562
563 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
564 }
565 goto NextOperand;
566
567 case ARGI_DATAOBJECT:
568 /*
569 * ARGI_DATAOBJECT is only used by the SizeOf operator.
570 * Need a buffer, string, package, or RefOf reference.
571 *
572 * The only reference allowed here is a direct reference to
573 * a namespace node.
574 */
575 switch (ObjDesc->Common.Type)
576 {
577 case ACPI_TYPE_PACKAGE:
578 case ACPI_TYPE_STRING:
579 case ACPI_TYPE_BUFFER:
580 case ACPI_TYPE_LOCAL_REFERENCE:
581
582 /* Valid operand */
583 break;
584
585 default:
586
587 ACPI_ERROR ((AE_INFO,
588 "Needed [Buffer/String/Package/Reference], found [%s] %p",
589 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
590
591 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
592 }
593 goto NextOperand;
594
595 case ARGI_COMPLEXOBJ:
596
597 /* Need a buffer or package or (ACPI 2.0) String */
598
599 switch (ObjDesc->Common.Type)
600 {
601 case ACPI_TYPE_PACKAGE:
602 case ACPI_TYPE_STRING:
603 case ACPI_TYPE_BUFFER:
604
605 /* Valid operand */
606 break;
607
608 default:
609
610 ACPI_ERROR ((AE_INFO,
611 "Needed [Buffer/String/Package], found [%s] %p",
612 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
613
614 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
615 }
616 goto NextOperand;
617
618 case ARGI_REGION_OR_BUFFER: /* Used by Load() only */
619
620 /* Need an operand of type REGION or a BUFFER (which could be a resolved region field) */
621
622 switch (ObjDesc->Common.Type)
623 {
624 case ACPI_TYPE_BUFFER:
625 case ACPI_TYPE_REGION:
626
627 /* Valid operand */
628 break;
629
630 default:
631
632 ACPI_ERROR ((AE_INFO,
633 "Needed [Region/Buffer], found [%s] %p",
634 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
635
636 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
637 }
638 goto NextOperand;
639
640 case ARGI_DATAREFOBJ:
641
642 /* Used by the Store() operator only */
643
644 switch (ObjDesc->Common.Type)
645 {
646 case ACPI_TYPE_INTEGER:
647 case ACPI_TYPE_PACKAGE:
648 case ACPI_TYPE_STRING:
649 case ACPI_TYPE_BUFFER:
650 case ACPI_TYPE_BUFFER_FIELD:
651 case ACPI_TYPE_LOCAL_REFERENCE:
652 case ACPI_TYPE_LOCAL_REGION_FIELD:
653 case ACPI_TYPE_LOCAL_BANK_FIELD:
654 case ACPI_TYPE_LOCAL_INDEX_FIELD:
655 case ACPI_TYPE_DDB_HANDLE:
656
657 /* Valid operand */
658 break;
659
660 default:
661
662 if (AcpiGbl_EnableInterpreterSlack)
663 {
664 /*
665 * Enable original behavior of Store(), allowing any and all
666 * objects as the source operand. The ACPI spec does not
667 * allow this, however.
668 */
669 break;
670 }
671
672 if (TargetOp == AML_DEBUG_OP)
673 {
674 /* Allow store of any object to the Debug object */
675
676 break;
677 }
678
679 ACPI_ERROR ((AE_INFO,
680 "Needed Integer/Buffer/String/Package/Ref/Ddb], found [%s] %p",
681 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
682
683 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
684 }
685 goto NextOperand;
686
687 default:
688
689 /* Unknown type */
690
691 ACPI_ERROR ((AE_INFO,
692 "Internal - Unknown ARGI (required operand) type 0x%X",
693 ThisArgType));
694
695 return_ACPI_STATUS (AE_BAD_PARAMETER);
696 }
697
698 /*
699 * Make sure that the original object was resolved to the
700 * required object type (Simple cases only).
701 */
702 Status = AcpiExCheckObjectType (TypeNeeded,
703 (*StackPtr)->Common.Type, *StackPtr);
704 if (ACPI_FAILURE (Status))
705 {
706 return_ACPI_STATUS (Status);
707 }
708
709 NextOperand:
710 /*
711 * If more operands needed, decrement StackPtr to point
712 * to next operand on stack
713 */
714 if (GET_CURRENT_ARG_TYPE (ArgTypes))
715 {
716 StackPtr--;
717 }
718 }
719
720 ACPI_DUMP_OPERANDS (WalkState->Operands,
721 AcpiPsGetOpcodeName (Opcode), WalkState->NumOperands);
722
723 return_ACPI_STATUS (Status);
724 }