1 /****************************************************************************** 2 * 3 * Module Name: evxfregn - External Interfaces, ACPI Operation Regions and 4 * Address Spaces. 5 * 6 *****************************************************************************/ 7 8 /* 9 * Copyright (C) 2000 - 2014, Intel Corp. 10 * All rights reserved. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions, and the following disclaimer, 17 * without modification. 18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 19 * substantially similar to the "NO WARRANTY" disclaimer below 20 * ("Disclaimer") and any redistribution must be conditioned upon 21 * including a substantially similar Disclaimer requirement for further 22 * binary redistribution. 23 * 3. Neither the names of the above-listed copyright holders nor the names 24 * of any contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * Alternatively, this software may be distributed under the terms of the 28 * GNU General Public License ("GPL") version 2 as published by the Free 29 * Software Foundation. 30 * 31 * NO WARRANTY 32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 42 * POSSIBILITY OF SUCH DAMAGES. 43 */ 44 45 #define __EVXFREGN_C__ 46 #define EXPORT_ACPI_INTERFACES 47 48 #include "acpi.h" 49 #include "accommon.h" 50 #include "acnamesp.h" 51 #include "acevents.h" 52 53 #define _COMPONENT ACPI_EVENTS 54 ACPI_MODULE_NAME ("evxfregn") 55 56 57 /******************************************************************************* 58 * 59 * FUNCTION: AcpiInstallAddressSpaceHandler 60 * 61 * PARAMETERS: Device - Handle for the device 62 * SpaceId - The address space ID 63 * Handler - Address of the handler 64 * Setup - Address of the setup function 65 * Context - Value passed to the handler on each access 66 * 67 * RETURN: Status 68 * 69 * DESCRIPTION: Install a handler for all OpRegions of a given SpaceId. 70 * 71 * NOTE: This function should only be called after AcpiEnableSubsystem has 72 * been called. This is because any _REG methods associated with the Space ID 73 * are executed here, and these methods can only be safely executed after 74 * the default handlers have been installed and the hardware has been 75 * initialized (via AcpiEnableSubsystem.) 76 * 77 ******************************************************************************/ 78 79 ACPI_STATUS 80 AcpiInstallAddressSpaceHandler ( 81 ACPI_HANDLE Device, 82 ACPI_ADR_SPACE_TYPE SpaceId, 83 ACPI_ADR_SPACE_HANDLER Handler, 84 ACPI_ADR_SPACE_SETUP Setup, 85 void *Context) 86 { 87 ACPI_NAMESPACE_NODE *Node; 88 ACPI_STATUS Status; 89 90 91 ACPI_FUNCTION_TRACE (AcpiInstallAddressSpaceHandler); 92 93 94 /* Parameter validation */ 95 96 if (!Device) 97 { 98 return_ACPI_STATUS (AE_BAD_PARAMETER); 99 } 100 101 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); 102 if (ACPI_FAILURE (Status)) 103 { 104 return_ACPI_STATUS (Status); 105 } 106 107 /* Convert and validate the device handle */ 108 109 Node = AcpiNsValidateHandle (Device); 110 if (!Node) 111 { 112 Status = AE_BAD_PARAMETER; 113 goto UnlockAndExit; 114 } 115 116 /* Install the handler for all Regions for this Space ID */ 117 118 Status = AcpiEvInstallSpaceHandler (Node, SpaceId, Handler, Setup, Context); 119 if (ACPI_FAILURE (Status)) 120 { 121 goto UnlockAndExit; 122 } 123 124 /* 125 * For the default SpaceIDs, (the IDs for which there are default region handlers 126 * installed) Only execute the _REG methods if the global initialization _REG 127 * methods have already been run (via AcpiInitializeObjects). In other words, 128 * we will defer the execution of the _REG methods for these SpaceIDs until 129 * execution of AcpiInitializeObjects. This is done because we need the handlers 130 * for the default spaces (mem/io/pci/table) to be installed before we can run 131 * any control methods (or _REG methods). There is known BIOS code that depends 132 * on this. 133 * 134 * For all other SpaceIDs, we can safely execute the _REG methods immediately. 135 * This means that for IDs like EmbeddedController, this function should be called 136 * only after AcpiEnableSubsystem has been called. 137 */ 138 switch (SpaceId) 139 { 140 case ACPI_ADR_SPACE_SYSTEM_MEMORY: 141 case ACPI_ADR_SPACE_SYSTEM_IO: 142 case ACPI_ADR_SPACE_PCI_CONFIG: 143 case ACPI_ADR_SPACE_DATA_TABLE: 144 145 if (!AcpiGbl_RegMethodsExecuted) 146 { 147 /* We will defer execution of the _REG methods for this space */ 148 goto UnlockAndExit; 149 } 150 break; 151 152 default: 153 154 break; 155 } 156 157 /* Run all _REG methods for this address space */ 158 159 Status = AcpiEvExecuteRegMethods (Node, SpaceId); 160 161 162 UnlockAndExit: 163 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); 164 return_ACPI_STATUS (Status); 165 } 166 167 ACPI_EXPORT_SYMBOL (AcpiInstallAddressSpaceHandler) 168 169 170 /******************************************************************************* 171 * 172 * FUNCTION: AcpiRemoveAddressSpaceHandler 173 * 174 * PARAMETERS: Device - Handle for the device 175 * SpaceId - The address space ID 176 * Handler - Address of the handler 177 * 178 * RETURN: Status 179 * 180 * DESCRIPTION: Remove a previously installed handler. 181 * 182 ******************************************************************************/ 183 184 ACPI_STATUS 185 AcpiRemoveAddressSpaceHandler ( 186 ACPI_HANDLE Device, 187 ACPI_ADR_SPACE_TYPE SpaceId, 188 ACPI_ADR_SPACE_HANDLER Handler) 189 { 190 ACPI_OPERAND_OBJECT *ObjDesc; 191 ACPI_OPERAND_OBJECT *HandlerObj; 192 ACPI_OPERAND_OBJECT *RegionObj; 193 ACPI_OPERAND_OBJECT **LastObjPtr; 194 ACPI_NAMESPACE_NODE *Node; 195 ACPI_STATUS Status; 196 197 198 ACPI_FUNCTION_TRACE (AcpiRemoveAddressSpaceHandler); 199 200 201 /* Parameter validation */ 202 203 if (!Device) 204 { 205 return_ACPI_STATUS (AE_BAD_PARAMETER); 206 } 207 208 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); 209 if (ACPI_FAILURE (Status)) 210 { 211 return_ACPI_STATUS (Status); 212 } 213 214 /* Convert and validate the device handle */ 215 216 Node = AcpiNsValidateHandle (Device); 217 if (!Node || 218 ((Node->Type != ACPI_TYPE_DEVICE) && 219 (Node->Type != ACPI_TYPE_PROCESSOR) && 220 (Node->Type != ACPI_TYPE_THERMAL) && 221 (Node != AcpiGbl_RootNode))) 222 { 223 Status = AE_BAD_PARAMETER; 224 goto UnlockAndExit; 225 } 226 227 /* Make sure the internal object exists */ 228 229 ObjDesc = AcpiNsGetAttachedObject (Node); 230 if (!ObjDesc) 231 { 232 Status = AE_NOT_EXIST; 233 goto UnlockAndExit; 234 } 235 236 /* Find the address handler the user requested */ 237 238 HandlerObj = ObjDesc->Device.Handler; 239 LastObjPtr = &ObjDesc->Device.Handler; 240 while (HandlerObj) 241 { 242 /* We have a handler, see if user requested this one */ 243 244 if (HandlerObj->AddressSpace.SpaceId == SpaceId) 245 { 246 /* Handler must be the same as the installed handler */ 247 248 if (HandlerObj->AddressSpace.Handler != Handler) 249 { 250 Status = AE_BAD_PARAMETER; 251 goto UnlockAndExit; 252 } 253 254 /* Matched SpaceId, first dereference this in the Regions */ 255 256 ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, 257 "Removing address handler %p(%p) for region %s " 258 "on Device %p(%p)\n", 259 HandlerObj, Handler, AcpiUtGetRegionName (SpaceId), 260 Node, ObjDesc)); 261 262 RegionObj = HandlerObj->AddressSpace.RegionList; 263 264 /* Walk the handler's region list */ 265 266 while (RegionObj) 267 { 268 /* 269 * First disassociate the handler from the region. 270 * 271 * NOTE: this doesn't mean that the region goes away 272 * The region is just inaccessible as indicated to 273 * the _REG method 274 */ 275 AcpiEvDetachRegion (RegionObj, TRUE); 276 277 /* 278 * Walk the list: Just grab the head because the 279 * DetachRegion removed the previous head. 280 */ 281 RegionObj = HandlerObj->AddressSpace.RegionList; 282 283 } 284 285 /* Remove this Handler object from the list */ 286 287 *LastObjPtr = HandlerObj->AddressSpace.Next; 288 289 /* Now we can delete the handler object */ 290 291 AcpiUtRemoveReference (HandlerObj); 292 goto UnlockAndExit; 293 } 294 295 /* Walk the linked list of handlers */ 296 297 LastObjPtr = &HandlerObj->AddressSpace.Next; 298 HandlerObj = HandlerObj->AddressSpace.Next; 299 } 300 301 /* The handler does not exist */ 302 303 ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, 304 "Unable to remove address handler %p for %s(%X), DevNode %p, obj %p\n", 305 Handler, AcpiUtGetRegionName (SpaceId), SpaceId, Node, ObjDesc)); 306 307 Status = AE_NOT_EXIST; 308 309 UnlockAndExit: 310 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); 311 return_ACPI_STATUS (Status); 312 } 313 314 ACPI_EXPORT_SYMBOL (AcpiRemoveAddressSpaceHandler)