1 /******************************************************************************* 2 * 3 * Module Name: dmwalk - AML disassembly tree walk 4 * 5 ******************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2011, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 45 #include "acpi.h" 46 #include "accommon.h" 47 #include "acparser.h" 48 #include "amlcode.h" 49 #include "acdisasm.h" 50 #include "acdebug.h" 51 52 53 #ifdef ACPI_DISASSEMBLER 54 55 #define _COMPONENT ACPI_CA_DEBUGGER 56 ACPI_MODULE_NAME ("dmwalk") 57 58 59 #define DB_FULL_OP_INFO "[%4.4s] @%5.5X #%4.4X: " 60 61 /* Stub for non-compiler code */ 62 63 #ifndef ACPI_ASL_COMPILER 64 void 65 AcpiDmEmitExternals ( 66 void) 67 { 68 return; 69 } 70 #endif 71 72 /* Local prototypes */ 73 74 static ACPI_STATUS 75 AcpiDmDescendingOp ( 76 ACPI_PARSE_OBJECT *Op, 77 UINT32 Level, 78 void *Context); 79 80 static ACPI_STATUS 81 AcpiDmAscendingOp ( 82 ACPI_PARSE_OBJECT *Op, 83 UINT32 Level, 84 void *Context); 85 86 static UINT32 87 AcpiDmBlockType ( 88 ACPI_PARSE_OBJECT *Op); 89 90 91 /******************************************************************************* 92 * 93 * FUNCTION: AcpiDmDisassemble 94 * 95 * PARAMETERS: WalkState - Current state 96 * Origin - Starting object 97 * NumOpcodes - Max number of opcodes to be displayed 98 * 99 * RETURN: None 100 * 101 * DESCRIPTION: Disassemble parser object and its children. This is the 102 * main entry point of the disassembler. 103 * 104 ******************************************************************************/ 105 106 void 107 AcpiDmDisassemble ( 108 ACPI_WALK_STATE *WalkState, 109 ACPI_PARSE_OBJECT *Origin, 110 UINT32 NumOpcodes) 111 { 112 ACPI_PARSE_OBJECT *Op = Origin; 113 ACPI_OP_WALK_INFO Info; 114 115 116 if (!Op) 117 { 118 return; 119 } 120 121 Info.Flags = 0; 122 Info.Level = 0; 123 Info.Count = 0; 124 Info.WalkState = WalkState; 125 AcpiDmWalkParseTree (Op, AcpiDmDescendingOp, AcpiDmAscendingOp, &Info); 126 return; 127 } 128 129 130 /******************************************************************************* 131 * 132 * FUNCTION: AcpiDmWalkParseTree 133 * 134 * PARAMETERS: Op - Root Op object 135 * DescendingCallback - Called during tree descent 136 * AscendingCallback - Called during tree ascent 137 * Context - To be passed to the callbacks 138 * 139 * RETURN: Status from callback(s) 140 * 141 * DESCRIPTION: Walk the entire parse tree. 142 * 143 ******************************************************************************/ 144 145 void 146 AcpiDmWalkParseTree ( 147 ACPI_PARSE_OBJECT *Op, 148 ASL_WALK_CALLBACK DescendingCallback, 149 ASL_WALK_CALLBACK AscendingCallback, 150 void *Context) 151 { 152 BOOLEAN NodePreviouslyVisited; 153 ACPI_PARSE_OBJECT *StartOp = Op; 154 ACPI_STATUS Status; 155 ACPI_PARSE_OBJECT *Next; 156 ACPI_OP_WALK_INFO *Info = Context; 157 158 159 Info->Level = 0; 160 NodePreviouslyVisited = FALSE; 161 162 while (Op) 163 { 164 if (NodePreviouslyVisited) 165 { 166 if (AscendingCallback) 167 { 168 Status = AscendingCallback (Op, Info->Level, Context); 169 if (ACPI_FAILURE (Status)) 170 { 171 return; 172 } 173 } 174 } 175 else 176 { 177 /* Let the callback process the node */ 178 179 Status = DescendingCallback (Op, Info->Level, Context); 180 if (ACPI_SUCCESS (Status)) 181 { 182 /* Visit children first, once */ 183 184 Next = AcpiPsGetArg (Op, 0); 185 if (Next) 186 { 187 Info->Level++; 188 Op = Next; 189 continue; 190 } 191 } 192 else if (Status != AE_CTRL_DEPTH) 193 { 194 /* Exit immediately on any error */ 195 196 return; 197 } 198 } 199 200 /* Terminate walk at start op */ 201 202 if (Op == StartOp) 203 { 204 break; 205 } 206 207 /* No more children, re-visit this node */ 208 209 if (!NodePreviouslyVisited) 210 { 211 NodePreviouslyVisited = TRUE; 212 continue; 213 } 214 215 /* No more children, visit peers */ 216 217 if (Op->Common.Next) 218 { 219 Op = Op->Common.Next; 220 NodePreviouslyVisited = FALSE; 221 } 222 else 223 { 224 /* No peers, re-visit parent */ 225 226 if (Info->Level != 0 ) 227 { 228 Info->Level--; 229 } 230 231 Op = Op->Common.Parent; 232 NodePreviouslyVisited = TRUE; 233 } 234 } 235 236 /* If we get here, the walk completed with no errors */ 237 238 return; 239 } 240 241 242 /******************************************************************************* 243 * 244 * FUNCTION: AcpiDmBlockType 245 * 246 * PARAMETERS: Op - Object to be examined 247 * 248 * RETURN: BlockType - not a block, parens, braces, or even both. 249 * 250 * DESCRIPTION: Type of block for this op (parens or braces) 251 * 252 ******************************************************************************/ 253 254 static UINT32 255 AcpiDmBlockType ( 256 ACPI_PARSE_OBJECT *Op) 257 { 258 const ACPI_OPCODE_INFO *OpInfo; 259 260 261 if (!Op) 262 { 263 return (BLOCK_NONE); 264 } 265 266 switch (Op->Common.AmlOpcode) 267 { 268 case AML_ELSE_OP: 269 270 return (BLOCK_BRACE); 271 272 case AML_METHOD_OP: 273 case AML_DEVICE_OP: 274 case AML_SCOPE_OP: 275 case AML_PROCESSOR_OP: 276 case AML_POWER_RES_OP: 277 case AML_THERMAL_ZONE_OP: 278 case AML_IF_OP: 279 case AML_WHILE_OP: 280 case AML_FIELD_OP: 281 case AML_INDEX_FIELD_OP: 282 case AML_BANK_FIELD_OP: 283 284 return (BLOCK_PAREN | BLOCK_BRACE); 285 286 case AML_BUFFER_OP: 287 288 if (Op->Common.DisasmOpcode == ACPI_DASM_UNICODE) 289 { 290 return (BLOCK_NONE); 291 } 292 293 /*lint -fallthrough */ 294 295 case AML_PACKAGE_OP: 296 case AML_VAR_PACKAGE_OP: 297 298 return (BLOCK_PAREN | BLOCK_BRACE); 299 300 case AML_EVENT_OP: 301 302 return (BLOCK_PAREN); 303 304 default: 305 306 OpInfo = AcpiPsGetOpcodeInfo (Op->Common.AmlOpcode); 307 if (OpInfo->Flags & AML_HAS_ARGS) 308 { 309 return (BLOCK_PAREN); 310 } 311 312 return (BLOCK_NONE); 313 } 314 } 315 316 317 /******************************************************************************* 318 * 319 * FUNCTION: AcpiDmListType 320 * 321 * PARAMETERS: Op - Object to be examined 322 * 323 * RETURN: ListType - has commas or not. 324 * 325 * DESCRIPTION: Type of block for this op (parens or braces) 326 * 327 ******************************************************************************/ 328 329 UINT32 330 AcpiDmListType ( 331 ACPI_PARSE_OBJECT *Op) 332 { 333 const ACPI_OPCODE_INFO *OpInfo; 334 335 336 if (!Op) 337 { 338 return (BLOCK_NONE); 339 } 340 341 switch (Op->Common.AmlOpcode) 342 { 343 344 case AML_ELSE_OP: 345 case AML_METHOD_OP: 346 case AML_DEVICE_OP: 347 case AML_SCOPE_OP: 348 case AML_POWER_RES_OP: 349 case AML_PROCESSOR_OP: 350 case AML_THERMAL_ZONE_OP: 351 case AML_IF_OP: 352 case AML_WHILE_OP: 353 case AML_FIELD_OP: 354 case AML_INDEX_FIELD_OP: 355 case AML_BANK_FIELD_OP: 356 357 return (BLOCK_NONE); 358 359 case AML_BUFFER_OP: 360 case AML_PACKAGE_OP: 361 case AML_VAR_PACKAGE_OP: 362 363 return (BLOCK_COMMA_LIST); 364 365 default: 366 367 OpInfo = AcpiPsGetOpcodeInfo (Op->Common.AmlOpcode); 368 if (OpInfo->Flags & AML_HAS_ARGS) 369 { 370 return (BLOCK_COMMA_LIST); 371 } 372 373 return (BLOCK_NONE); 374 } 375 } 376 377 378 /******************************************************************************* 379 * 380 * FUNCTION: AcpiDmDescendingOp 381 * 382 * PARAMETERS: ASL_WALK_CALLBACK 383 * 384 * RETURN: Status 385 * 386 * DESCRIPTION: First visitation of a parse object during tree descent. 387 * Decode opcode name and begin parameter list(s), if any. 388 * 389 ******************************************************************************/ 390 391 static ACPI_STATUS 392 AcpiDmDescendingOp ( 393 ACPI_PARSE_OBJECT *Op, 394 UINT32 Level, 395 void *Context) 396 { 397 ACPI_OP_WALK_INFO *Info = Context; 398 const ACPI_OPCODE_INFO *OpInfo; 399 UINT32 Name; 400 ACPI_PARSE_OBJECT *NextOp; 401 402 403 if (Op->Common.DisasmFlags & ACPI_PARSEOP_IGNORE) 404 { 405 /* Ignore this op -- it was handled elsewhere */ 406 407 return (AE_CTRL_DEPTH); 408 } 409 410 /* Level 0 is at the Definition Block level */ 411 412 if (Level == 0) 413 { 414 /* In verbose mode, print the AML offset, opcode and depth count */ 415 416 if (Info->WalkState) 417 { 418 VERBOSE_PRINT ((DB_FULL_OP_INFO, 419 (Info->WalkState->MethodNode ? 420 Info->WalkState->MethodNode->Name.Ascii : " "), 421 Op->Common.AmlOffset, (UINT32) Op->Common.AmlOpcode)); 422 } 423 424 if (Op->Common.AmlOpcode == AML_SCOPE_OP) 425 { 426 /* This is the beginning of the Definition Block */ 427 428 AcpiOsPrintf ("{\n"); 429 430 /* Emit all External() declarations here */ 431 432 AcpiDmEmitExternals (); 433 return (AE_OK); 434 } 435 } 436 else if ((AcpiDmBlockType (Op->Common.Parent) & BLOCK_BRACE) && 437 (!(Op->Common.DisasmFlags & ACPI_PARSEOP_PARAMLIST)) && 438 (Op->Common.AmlOpcode != AML_INT_BYTELIST_OP)) 439 { 440 /* 441 * This is a first-level element of a term list, 442 * indent a new line 443 */ 444 AcpiDmIndent (Level); 445 Info->LastLevel = Level; 446 Info->Count = 0; 447 } 448 449 /* 450 * This is an inexpensive mechanism to try and keep lines from getting 451 * too long. When the limit is hit, start a new line at the previous 452 * indent plus one. A better but more expensive mechanism would be to 453 * keep track of the current column. 454 */ 455 Info->Count++; 456 if (Info->Count /*+Info->LastLevel*/ > 10) 457 { 458 Info->Count = 0; 459 AcpiOsPrintf ("\n"); 460 AcpiDmIndent (Info->LastLevel + 1); 461 } 462 463 /* Print the opcode name */ 464 465 AcpiDmDisassembleOneOp (NULL, Info, Op); 466 467 if (Op->Common.DisasmOpcode == ACPI_DASM_LNOT_PREFIX) 468 { 469 return (AE_OK); 470 } 471 472 if ((Op->Common.AmlOpcode == AML_NAME_OP) || 473 (Op->Common.AmlOpcode == AML_RETURN_OP)) 474 { 475 Info->Level--; 476 } 477 478 /* Start the opcode argument list if necessary */ 479 480 OpInfo = AcpiPsGetOpcodeInfo (Op->Common.AmlOpcode); 481 482 if ((OpInfo->Flags & AML_HAS_ARGS) || 483 (Op->Common.AmlOpcode == AML_EVENT_OP)) 484 { 485 /* This opcode has an argument list */ 486 487 if (AcpiDmBlockType (Op) & BLOCK_PAREN) 488 { 489 AcpiOsPrintf (" ("); 490 } 491 492 /* If this is a named opcode, print the associated name value */ 493 494 if (OpInfo->Flags & AML_NAMED) 495 { 496 switch (Op->Common.AmlOpcode) 497 { 498 case AML_ALIAS_OP: 499 500 NextOp = AcpiPsGetDepthNext (NULL, Op); 501 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_IGNORE; 502 AcpiDmNamestring (NextOp->Common.Value.Name); 503 AcpiOsPrintf (", "); 504 505 /*lint -fallthrough */ 506 507 default: 508 509 Name = AcpiPsGetName (Op); 510 if (Op->Named.Path) 511 { 512 AcpiDmNamestring ((char *) Op->Named.Path); 513 } 514 else 515 { 516 AcpiDmDumpName (Name); 517 } 518 519 if (Op->Common.AmlOpcode != AML_INT_NAMEDFIELD_OP) 520 { 521 if (AcpiGbl_DbOpt_verbose) 522 { 523 (void) AcpiPsDisplayObjectPathname (NULL, Op); 524 } 525 } 526 break; 527 } 528 529 switch (Op->Common.AmlOpcode) 530 { 531 case AML_METHOD_OP: 532 533 AcpiDmMethodFlags (Op); 534 AcpiOsPrintf (")"); 535 break; 536 537 538 case AML_NAME_OP: 539 540 /* Check for _HID and related EISAID() */ 541 542 AcpiDmIsEisaId (Op); 543 AcpiOsPrintf (", "); 544 break; 545 546 547 case AML_REGION_OP: 548 549 AcpiDmRegionFlags (Op); 550 break; 551 552 553 case AML_POWER_RES_OP: 554 555 /* Mark the next two Ops as part of the parameter list */ 556 557 AcpiOsPrintf (", "); 558 NextOp = AcpiPsGetDepthNext (NULL, Op); 559 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_PARAMLIST; 560 561 NextOp = NextOp->Common.Next; 562 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_PARAMLIST; 563 return (AE_OK); 564 565 566 case AML_PROCESSOR_OP: 567 568 /* Mark the next three Ops as part of the parameter list */ 569 570 AcpiOsPrintf (", "); 571 NextOp = AcpiPsGetDepthNext (NULL, Op); 572 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_PARAMLIST; 573 574 NextOp = NextOp->Common.Next; 575 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_PARAMLIST; 576 577 NextOp = NextOp->Common.Next; 578 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_PARAMLIST; 579 return (AE_OK); 580 581 582 case AML_MUTEX_OP: 583 case AML_DATA_REGION_OP: 584 585 AcpiOsPrintf (", "); 586 return (AE_OK); 587 588 589 case AML_EVENT_OP: 590 case AML_ALIAS_OP: 591 592 return (AE_OK); 593 594 595 case AML_SCOPE_OP: 596 case AML_DEVICE_OP: 597 case AML_THERMAL_ZONE_OP: 598 599 AcpiOsPrintf (")"); 600 break; 601 602 603 default: 604 605 AcpiOsPrintf ("*** Unhandled named opcode %X\n", Op->Common.AmlOpcode); 606 break; 607 } 608 } 609 610 else switch (Op->Common.AmlOpcode) 611 { 612 case AML_FIELD_OP: 613 case AML_BANK_FIELD_OP: 614 case AML_INDEX_FIELD_OP: 615 616 Info->BitOffset = 0; 617 618 /* Name of the parent OperationRegion */ 619 620 NextOp = AcpiPsGetDepthNext (NULL, Op); 621 AcpiDmNamestring (NextOp->Common.Value.Name); 622 AcpiOsPrintf (", "); 623 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_IGNORE; 624 625 switch (Op->Common.AmlOpcode) 626 { 627 case AML_BANK_FIELD_OP: 628 629 /* Namestring - Bank Name */ 630 631 NextOp = AcpiPsGetDepthNext (NULL, NextOp); 632 AcpiDmNamestring (NextOp->Common.Value.Name); 633 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_IGNORE; 634 AcpiOsPrintf (", "); 635 636 /* 637 * Bank Value. This is a TermArg in the middle of the parameter 638 * list, must handle it here. 639 * 640 * Disassemble the TermArg parse tree. ACPI_PARSEOP_PARAMLIST 641 * eliminates newline in the output. 642 */ 643 NextOp = NextOp->Common.Next; 644 645 Info->Flags = ACPI_PARSEOP_PARAMLIST; 646 AcpiDmWalkParseTree (NextOp, AcpiDmDescendingOp, AcpiDmAscendingOp, Info); 647 Info->Flags = 0; 648 Info->Level = Level; 649 650 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_IGNORE; 651 AcpiOsPrintf (", "); 652 break; 653 654 case AML_INDEX_FIELD_OP: 655 656 /* Namestring - Data Name */ 657 658 NextOp = AcpiPsGetDepthNext (NULL, NextOp); 659 AcpiDmNamestring (NextOp->Common.Value.Name); 660 AcpiOsPrintf (", "); 661 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_IGNORE; 662 break; 663 664 default: 665 666 break; 667 } 668 669 AcpiDmFieldFlags (NextOp); 670 break; 671 672 673 case AML_BUFFER_OP: 674 675 /* The next op is the size parameter */ 676 677 NextOp = AcpiPsGetDepthNext (NULL, Op); 678 if (!NextOp) 679 { 680 /* Single-step support */ 681 682 return (AE_OK); 683 } 684 685 if (Op->Common.DisasmOpcode == ACPI_DASM_RESOURCE) 686 { 687 /* 688 * We have a resource list. Don't need to output 689 * the buffer size Op. Open up a new block 690 */ 691 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_IGNORE; 692 NextOp = NextOp->Common.Next; 693 AcpiOsPrintf (")\n"); 694 AcpiDmIndent (Info->Level); 695 AcpiOsPrintf ("{\n"); 696 return (AE_OK); 697 } 698 699 /* Normal Buffer, mark size as in the parameter list */ 700 701 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_PARAMLIST; 702 return (AE_OK); 703 704 705 case AML_VAR_PACKAGE_OP: 706 case AML_IF_OP: 707 case AML_WHILE_OP: 708 709 /* The next op is the size or predicate parameter */ 710 711 NextOp = AcpiPsGetDepthNext (NULL, Op); 712 if (NextOp) 713 { 714 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_PARAMLIST; 715 } 716 return (AE_OK); 717 718 719 case AML_PACKAGE_OP: 720 721 /* The next op is the size or predicate parameter */ 722 723 NextOp = AcpiPsGetDepthNext (NULL, Op); 724 if (NextOp) 725 { 726 NextOp->Common.DisasmFlags |= ACPI_PARSEOP_PARAMLIST; 727 } 728 return (AE_OK); 729 730 731 case AML_MATCH_OP: 732 733 AcpiDmMatchOp (Op); 734 break; 735 736 737 default: 738 739 break; 740 } 741 742 if (AcpiDmBlockType (Op) & BLOCK_BRACE) 743 { 744 AcpiOsPrintf ("\n"); 745 AcpiDmIndent (Level); 746 AcpiOsPrintf ("{\n"); 747 } 748 } 749 750 return (AE_OK); 751 } 752 753 754 /******************************************************************************* 755 * 756 * FUNCTION: AcpiDmAscendingOp 757 * 758 * PARAMETERS: ASL_WALK_CALLBACK 759 * 760 * RETURN: Status 761 * 762 * DESCRIPTION: Second visitation of a parse object, during ascent of parse 763 * tree. Close out any parameter lists and complete the opcode. 764 * 765 ******************************************************************************/ 766 767 static ACPI_STATUS 768 AcpiDmAscendingOp ( 769 ACPI_PARSE_OBJECT *Op, 770 UINT32 Level, 771 void *Context) 772 { 773 ACPI_OP_WALK_INFO *Info = Context; 774 775 776 if (Op->Common.DisasmFlags & ACPI_PARSEOP_IGNORE) 777 { 778 /* Ignore this op -- it was handled elsewhere */ 779 780 return (AE_OK); 781 } 782 783 if ((Level == 0) && (Op->Common.AmlOpcode == AML_SCOPE_OP)) 784 { 785 /* Indicates the end of the current descriptor block (table) */ 786 787 AcpiOsPrintf ("}\n\n"); 788 return (AE_OK); 789 } 790 791 switch (AcpiDmBlockType (Op)) 792 { 793 case BLOCK_PAREN: 794 795 /* Completed an op that has arguments, add closing paren */ 796 797 AcpiOsPrintf (")"); 798 799 /* Could be a nested operator, check if comma required */ 800 801 if (!AcpiDmCommaIfListMember (Op)) 802 { 803 if ((AcpiDmBlockType (Op->Common.Parent) & BLOCK_BRACE) && 804 (!(Op->Common.DisasmFlags & ACPI_PARSEOP_PARAMLIST)) && 805 (Op->Common.AmlOpcode != AML_INT_BYTELIST_OP)) 806 { 807 /* 808 * This is a first-level element of a term list 809 * start a new line 810 */ 811 if (!(Info->Flags & ACPI_PARSEOP_PARAMLIST)) 812 { 813 AcpiOsPrintf ("\n"); 814 } 815 } 816 } 817 break; 818 819 820 case BLOCK_BRACE: 821 case (BLOCK_BRACE | BLOCK_PAREN): 822 823 /* Completed an op that has a term list, add closing brace */ 824 825 if (Op->Common.DisasmFlags & ACPI_PARSEOP_EMPTY_TERMLIST) 826 { 827 AcpiOsPrintf ("}"); 828 } 829 else 830 { 831 AcpiDmIndent (Level); 832 AcpiOsPrintf ("}"); 833 } 834 835 AcpiDmCommaIfListMember (Op); 836 837 if (AcpiDmBlockType (Op->Common.Parent) != BLOCK_PAREN) 838 { 839 AcpiOsPrintf ("\n"); 840 if (!(Op->Common.DisasmFlags & ACPI_PARSEOP_EMPTY_TERMLIST)) 841 { 842 if ((Op->Common.AmlOpcode == AML_IF_OP) && 843 (Op->Common.Next) && 844 (Op->Common.Next->Common.AmlOpcode == AML_ELSE_OP)) 845 { 846 break; 847 } 848 849 if ((AcpiDmBlockType (Op->Common.Parent) & BLOCK_BRACE) && 850 (!Op->Common.Next)) 851 { 852 break; 853 } 854 AcpiOsPrintf ("\n"); 855 } 856 } 857 break; 858 859 860 case BLOCK_NONE: 861 default: 862 863 /* Could be a nested operator, check if comma required */ 864 865 if (!AcpiDmCommaIfListMember (Op)) 866 { 867 if ((AcpiDmBlockType (Op->Common.Parent) & BLOCK_BRACE) && 868 (!(Op->Common.DisasmFlags & ACPI_PARSEOP_PARAMLIST)) && 869 (Op->Common.AmlOpcode != AML_INT_BYTELIST_OP)) 870 { 871 /* 872 * This is a first-level element of a term list 873 * start a new line 874 */ 875 AcpiOsPrintf ("\n"); 876 } 877 } 878 else if (Op->Common.Parent) 879 { 880 switch (Op->Common.Parent->Common.AmlOpcode) 881 { 882 case AML_PACKAGE_OP: 883 case AML_VAR_PACKAGE_OP: 884 885 if (!(Op->Common.DisasmFlags & ACPI_PARSEOP_PARAMLIST)) 886 { 887 AcpiOsPrintf ("\n"); 888 } 889 break; 890 891 default: 892 893 break; 894 } 895 } 896 break; 897 } 898 899 if (Op->Common.DisasmFlags & ACPI_PARSEOP_PARAMLIST) 900 { 901 if ((Op->Common.Next) && 902 (Op->Common.Next->Common.DisasmFlags & ACPI_PARSEOP_PARAMLIST)) 903 { 904 return (AE_OK); 905 } 906 907 /* 908 * Just completed a parameter node for something like "Buffer (param)". 909 * Close the paren and open up the term list block with a brace 910 */ 911 if (Op->Common.Next) 912 { 913 AcpiOsPrintf (")\n"); 914 AcpiDmIndent (Level - 1); 915 AcpiOsPrintf ("{\n"); 916 } 917 else 918 { 919 Op->Common.Parent->Common.DisasmFlags |= 920 ACPI_PARSEOP_EMPTY_TERMLIST; 921 AcpiOsPrintf (") {"); 922 } 923 } 924 925 if ((Op->Common.AmlOpcode == AML_NAME_OP) || 926 (Op->Common.AmlOpcode == AML_RETURN_OP)) 927 { 928 Info->Level++; 929 } 930 return (AE_OK); 931 } 932 933 934 #endif /* ACPI_DISASSEMBLER */