Print this page
    
acpica-unix2-20130823
PANKOVs restructure
    
      
        | Split | Close | 
      | Expand all | 
      | Collapse all | 
    
    
          --- old/usr/src/uts/intel/io/acpica/executer/exconfig.c
          +++ new/usr/src/common/acpica/components/executer/exconfig.c
   1    1  /******************************************************************************
   2    2   *
   3    3   * Module Name: exconfig - Namespace reconfiguration (Load/Unload opcodes)
   4    4   *
   5    5   *****************************************************************************/
   6    6  
   7    7  /*
   8      - * Copyright (C) 2000 - 2011, Intel Corp.
        8 + * Copyright (C) 2000 - 2013, Intel Corp.
   9    9   * All rights reserved.
  10   10   *
  11   11   * Redistribution and use in source and binary forms, with or without
  12   12   * modification, are permitted provided that the following conditions
  13   13   * are met:
  14   14   * 1. Redistributions of source code must retain the above copyright
  15   15   *    notice, this list of conditions, and the following disclaimer,
  16   16   *    without modification.
  17   17   * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18   18   *    substantially similar to the "NO WARRANTY" disclaimer below
  19   19   *    ("Disclaimer") and any redistribution must be conditioned upon
  20   20   *    including a substantially similar Disclaimer requirement for further
  21   21   *    binary redistribution.
  22   22   * 3. Neither the names of the above-listed copyright holders nor the names
  23   23   *    of any contributors may be used to endorse or promote products derived
  24   24   *    from this software without specific prior written permission.
  25   25   *
  26   26   * Alternatively, this software may be distributed under the terms of the
  27   27   * GNU General Public License ("GPL") version 2 as published by the Free
  28   28   * Software Foundation.
  29   29   *
  30   30   * NO WARRANTY
  31   31   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32   32   * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33   33   * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34   34   * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35   35   * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36   36   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37   37   * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38   38   * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39   39   * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40   40   * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41   41   * POSSIBILITY OF SUCH DAMAGES.
  42   42   */
  
    | ↓ open down ↓ | 24 lines elided | ↑ open up ↑ | 
  43   43  
  44   44  #define __EXCONFIG_C__
  45   45  
  46   46  #include "acpi.h"
  47   47  #include "accommon.h"
  48   48  #include "acinterp.h"
  49   49  #include "acnamesp.h"
  50   50  #include "actables.h"
  51   51  #include "acdispat.h"
  52   52  #include "acevents.h"
       53 +#include "amlcode.h"
  53   54  
  54   55  
  55   56  #define _COMPONENT          ACPI_EXECUTER
  56   57          ACPI_MODULE_NAME    ("exconfig")
  57   58  
  58   59  /* Local prototypes */
  59   60  
  60   61  static ACPI_STATUS
  61   62  AcpiExAddTable (
  62   63      UINT32                  TableIndex,
  63   64      ACPI_NAMESPACE_NODE     *ParentNode,
  64   65      ACPI_OPERAND_OBJECT     **DdbHandle);
  65   66  
  66   67  static ACPI_STATUS
  67   68  AcpiExRegionRead (
  68   69      ACPI_OPERAND_OBJECT     *ObjDesc,
  69   70      UINT32                  Length,
  70   71      UINT8                   *Buffer);
  71   72  
  72   73  
  73   74  /*******************************************************************************
  74   75   *
  75   76   * FUNCTION:    AcpiExAddTable
  76   77   *
  77   78   * PARAMETERS:  Table               - Pointer to raw table
  78   79   *              ParentNode          - Where to load the table (scope)
  79   80   *              DdbHandle           - Where to return the table handle.
  80   81   *
  81   82   * RETURN:      Status
  82   83   *
  83   84   * DESCRIPTION: Common function to Install and Load an ACPI table with a
  84   85   *              returned table handle.
  85   86   *
  86   87   ******************************************************************************/
  87   88  
  88   89  static ACPI_STATUS
  89   90  AcpiExAddTable (
  90   91      UINT32                  TableIndex,
  91   92      ACPI_NAMESPACE_NODE     *ParentNode,
  92   93      ACPI_OPERAND_OBJECT     **DdbHandle)
  93   94  {
  94   95      ACPI_OPERAND_OBJECT     *ObjDesc;
  95   96      ACPI_STATUS             Status;
  96   97      ACPI_OWNER_ID           OwnerId;
  97   98  
  98   99  
  99  100      ACPI_FUNCTION_TRACE (ExAddTable);
 100  101  
 101  102  
 102  103      /* Create an object to be the table handle */
 103  104  
 104  105      ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_LOCAL_REFERENCE);
 105  106      if (!ObjDesc)
 106  107      {
 107  108          return_ACPI_STATUS (AE_NO_MEMORY);
 108  109      }
 109  110  
 110  111      /* Init the table handle */
 111  112  
 112  113      ObjDesc->Common.Flags |= AOPOBJ_DATA_VALID;
 113  114      ObjDesc->Reference.Class = ACPI_REFCLASS_TABLE;
 114  115      *DdbHandle = ObjDesc;
 115  116  
 116  117      /* Install the new table into the local data structures */
 117  118  
 118  119      ObjDesc->Reference.Value = TableIndex;
 119  120  
 120  121      /* Add the table to the namespace */
 121  122  
 122  123      Status = AcpiNsLoadTable (TableIndex, ParentNode);
 123  124      if (ACPI_FAILURE (Status))
 124  125      {
 125  126          AcpiUtRemoveReference (ObjDesc);
 126  127          *DdbHandle = NULL;
 127  128          return_ACPI_STATUS (Status);
 128  129      }
 129  130  
 130  131      /* Execute any module-level code that was found in the table */
 131  132  
 132  133      AcpiExExitInterpreter ();
 133  134      AcpiNsExecModuleCodeList ();
 134  135      AcpiExEnterInterpreter ();
 135  136  
 136  137      /*
 137  138       * Update GPEs for any new _Lxx/_Exx methods. Ignore errors. The host is
 138  139       * responsible for discovering any new wake GPEs by running _PRW methods
 139  140       * that may have been loaded by this table.
 140  141       */
 141  142      Status = AcpiTbGetOwnerId (TableIndex, &OwnerId);
 142  143      if (ACPI_SUCCESS (Status))
 143  144      {
 144  145          AcpiEvUpdateGpes (OwnerId);
 145  146      }
 146  147  
 147  148      return_ACPI_STATUS (AE_OK);
 148  149  }
 149  150  
 150  151  
 151  152  /*******************************************************************************
 152  153   *
 153  154   * FUNCTION:    AcpiExLoadTableOp
 154  155   *
 155  156   * PARAMETERS:  WalkState           - Current state with operands
 156  157   *              ReturnDesc          - Where to store the return object
 157  158   *
 158  159   * RETURN:      Status
 159  160   *
 160  161   * DESCRIPTION: Load an ACPI table from the RSDT/XSDT
 161  162   *
 162  163   ******************************************************************************/
 163  164  
 164  165  ACPI_STATUS
 165  166  AcpiExLoadTableOp (
 166  167      ACPI_WALK_STATE         *WalkState,
 167  168      ACPI_OPERAND_OBJECT     **ReturnDesc)
 168  169  {
 169  170      ACPI_STATUS             Status;
 170  171      ACPI_OPERAND_OBJECT     **Operand = &WalkState->Operands[0];
 171  172      ACPI_NAMESPACE_NODE     *ParentNode;
  
    | ↓ open down ↓ | 109 lines elided | ↑ open up ↑ | 
 172  173      ACPI_NAMESPACE_NODE     *StartNode;
 173  174      ACPI_NAMESPACE_NODE     *ParameterNode = NULL;
 174  175      ACPI_OPERAND_OBJECT     *DdbHandle;
 175  176      ACPI_TABLE_HEADER       *Table;
 176  177      UINT32                  TableIndex;
 177  178  
 178  179  
 179  180      ACPI_FUNCTION_TRACE (ExLoadTableOp);
 180  181  
 181  182  
 182      -    /* Validate lengths for the SignatureString, OEMIDString, OEMTableID */
      183 +    /* Validate lengths for the Signature, OemId, and OemTableId strings */
 183  184  
 184  185      if ((Operand[0]->String.Length > ACPI_NAME_SIZE) ||
 185  186          (Operand[1]->String.Length > ACPI_OEM_ID_SIZE) ||
 186  187          (Operand[2]->String.Length > ACPI_OEM_TABLE_ID_SIZE))
 187  188      {
 188      -        return_ACPI_STATUS (AE_BAD_PARAMETER);
      189 +        return_ACPI_STATUS (AE_AML_STRING_LIMIT);
 189  190      }
 190  191  
 191  192      /* Find the ACPI table in the RSDT/XSDT */
 192  193  
 193      -    Status = AcpiTbFindTable (Operand[0]->String.Pointer,
 194      -                              Operand[1]->String.Pointer,
 195      -                              Operand[2]->String.Pointer, &TableIndex);
      194 +    Status = AcpiTbFindTable (
      195 +                Operand[0]->String.Pointer,
      196 +                Operand[1]->String.Pointer,
      197 +                Operand[2]->String.Pointer, &TableIndex);
 196  198      if (ACPI_FAILURE (Status))
 197  199      {
 198  200          if (Status != AE_NOT_FOUND)
 199  201          {
 200  202              return_ACPI_STATUS (Status);
 201  203          }
 202  204  
 203  205          /* Table not found, return an Integer=0 and AE_OK */
 204  206  
 205  207          DdbHandle = AcpiUtCreateIntegerObject ((UINT64) 0);
 206  208          if (!DdbHandle)
 207  209          {
 208  210              return_ACPI_STATUS (AE_NO_MEMORY);
 209  211          }
 210  212  
 211  213          *ReturnDesc = DdbHandle;
 212  214          return_ACPI_STATUS (AE_OK);
 213  215      }
 214  216  
  
    | ↓ open down ↓ | 9 lines elided | ↑ open up ↑ | 
 215  217      /* Default nodes */
 216  218  
 217  219      StartNode = WalkState->ScopeInfo->Scope.Node;
 218  220      ParentNode = AcpiGbl_RootNode;
 219  221  
 220  222      /* RootPath (optional parameter) */
 221  223  
 222  224      if (Operand[3]->String.Length > 0)
 223  225      {
 224  226          /*
 225      -         * Find the node referenced by the RootPathString.  This is the
      227 +         * Find the node referenced by the RootPathString. This is the
 226  228           * location within the namespace where the table will be loaded.
 227  229           */
 228  230          Status = AcpiNsGetNode (StartNode, Operand[3]->String.Pointer,
 229  231                      ACPI_NS_SEARCH_PARENT, &ParentNode);
 230  232          if (ACPI_FAILURE (Status))
 231  233          {
 232  234              return_ACPI_STATUS (Status);
 233  235          }
 234  236      }
 235  237  
 236  238      /* ParameterPath (optional parameter) */
 237  239  
 238  240      if (Operand[4]->String.Length > 0)
 239  241      {
 240      -        if ((Operand[4]->String.Pointer[0] != '\\') &&
 241      -            (Operand[4]->String.Pointer[0] != '^'))
      242 +        if ((Operand[4]->String.Pointer[0] != AML_ROOT_PREFIX) &&
      243 +            (Operand[4]->String.Pointer[0] != AML_PARENT_PREFIX))
 242  244          {
 243  245              /*
 244  246               * Path is not absolute, so it will be relative to the node
 245  247               * referenced by the RootPathString (or the NS root if omitted)
 246  248               */
 247  249              StartNode = ParentNode;
 248  250          }
 249  251  
 250  252          /* Find the node referenced by the ParameterPathString */
 251  253  
 252  254          Status = AcpiNsGetNode (StartNode, Operand[4]->String.Pointer,
 253  255                      ACPI_NS_SEARCH_PARENT, &ParameterNode);
 254  256          if (ACPI_FAILURE (Status))
 255  257          {
 256  258              return_ACPI_STATUS (Status);
 257  259          }
 258  260      }
 259  261  
 260  262      /* Load the table into the namespace */
 261  263  
 262  264      Status = AcpiExAddTable (TableIndex, ParentNode, &DdbHandle);
 263  265      if (ACPI_FAILURE (Status))
 264  266      {
 265  267          return_ACPI_STATUS (Status);
 266  268      }
 267  269  
 268  270      /* Parameter Data (optional) */
 269  271  
 270  272      if (ParameterNode)
 271  273      {
 272  274          /* Store the parameter data into the optional parameter object */
 273  275  
 274  276          Status = AcpiExStore (Operand[5],
 275  277                      ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, ParameterNode),
 276  278                      WalkState);
 277  279          if (ACPI_FAILURE (Status))
 278  280          {
 279  281              (void) AcpiExUnloadTable (DdbHandle);
 280  282  
 281  283              AcpiUtRemoveReference (DdbHandle);
 282  284              return_ACPI_STATUS (Status);
 283  285          }
 284  286      }
 285  287  
 286  288      Status = AcpiGetTableByIndex (TableIndex, &Table);
 287  289      if (ACPI_SUCCESS (Status))
 288  290      {
 289  291          ACPI_INFO ((AE_INFO, "Dynamic OEM Table Load:"));
 290  292          AcpiTbPrintTableHeader (0, Table);
 291  293      }
  
    | ↓ open down ↓ | 40 lines elided | ↑ open up ↑ | 
 292  294  
 293  295      /* Invoke table handler if present */
 294  296  
 295  297      if (AcpiGbl_TableHandler)
 296  298      {
 297  299          (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_LOAD, Table,
 298  300                      AcpiGbl_TableHandlerContext);
 299  301      }
 300  302  
 301  303      *ReturnDesc = DdbHandle;
 302      -    return_ACPI_STATUS  (Status);
      304 +    return_ACPI_STATUS (Status);
 303  305  }
 304  306  
 305  307  
 306  308  /*******************************************************************************
 307  309   *
 308  310   * FUNCTION:    AcpiExRegionRead
 309  311   *
 310  312   * PARAMETERS:  ObjDesc         - Region descriptor
 311  313   *              Length          - Number of bytes to read
 312  314   *              Buffer          - Pointer to where to put the data
 313  315   *
 314  316   * RETURN:      Status
 315  317   *
 316  318   * DESCRIPTION: Read data from an operation region. The read starts from the
 317  319   *              beginning of the region.
 318  320   *
 319  321   ******************************************************************************/
 320  322  
 321  323  static ACPI_STATUS
 322  324  AcpiExRegionRead (
 323  325      ACPI_OPERAND_OBJECT     *ObjDesc,
 324  326      UINT32                  Length,
 325  327      UINT8                   *Buffer)
 326  328  {
  
    | ↓ open down ↓ | 14 lines elided | ↑ open up ↑ | 
 327  329      ACPI_STATUS             Status;
 328  330      UINT64                  Value;
 329  331      UINT32                  RegionOffset = 0;
 330  332      UINT32                  i;
 331  333  
 332  334  
 333  335      /* Bytewise reads */
 334  336  
 335  337      for (i = 0; i < Length; i++)
 336  338      {
 337      -        Status = AcpiEvAddressSpaceDispatch (ObjDesc, ACPI_READ,
      339 +        Status = AcpiEvAddressSpaceDispatch (ObjDesc, NULL, ACPI_READ,
 338  340                      RegionOffset, 8, &Value);
 339  341          if (ACPI_FAILURE (Status))
 340  342          {
 341  343              return (Status);
 342  344          }
 343  345  
 344  346          *Buffer = (UINT8) Value;
 345  347          Buffer++;
 346  348          RegionOffset++;
 347  349      }
 348  350  
 349  351      return (AE_OK);
 350  352  }
 351  353  
 352  354  
 353  355  /*******************************************************************************
 354  356   *
 355  357   * FUNCTION:    AcpiExLoadOp
 356  358   *
 357  359   * PARAMETERS:  ObjDesc         - Region or Buffer/Field where the table will be
 358  360   *                                obtained
 359  361   *              Target          - Where a handle to the table will be stored
 360  362   *              WalkState       - Current state
 361  363   *
 362  364   * RETURN:      Status
 363  365   *
 364  366   * DESCRIPTION: Load an ACPI table from a field or operation region
 365  367   *
 366  368   * NOTE: Region Fields (Field, BankField, IndexFields) are resolved to buffer
 367  369   *       objects before this code is reached.
 368  370   *
 369  371   *       If source is an operation region, it must refer to SystemMemory, as
 370  372   *       per the ACPI specification.
 371  373   *
 372  374   ******************************************************************************/
 373  375  
 374  376  ACPI_STATUS
 375  377  AcpiExLoadOp (
 376  378      ACPI_OPERAND_OBJECT     *ObjDesc,
 377  379      ACPI_OPERAND_OBJECT     *Target,
 378  380      ACPI_WALK_STATE         *WalkState)
 379  381  {
 380  382      ACPI_OPERAND_OBJECT     *DdbHandle;
 381  383      ACPI_TABLE_HEADER       *Table;
 382  384      ACPI_TABLE_DESC         TableDesc;
 383  385      UINT32                  TableIndex;
 384  386      ACPI_STATUS             Status;
 385  387      UINT32                  Length;
 386  388  
 387  389  
 388  390      ACPI_FUNCTION_TRACE (ExLoadOp);
 389  391  
 390  392  
 391  393      ACPI_MEMSET (&TableDesc, 0, sizeof (ACPI_TABLE_DESC));
 392  394  
 393  395      /* Source Object can be either an OpRegion or a Buffer/Field */
 394  396  
 395  397      switch (ObjDesc->Common.Type)
 396  398      {
 397  399      case ACPI_TYPE_REGION:
 398  400  
 399  401          ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
 400  402              "Load table from Region %p\n", ObjDesc));
 401  403  
 402  404          /* Region must be SystemMemory (from ACPI spec) */
 403  405  
 404  406          if (ObjDesc->Region.SpaceId != ACPI_ADR_SPACE_SYSTEM_MEMORY)
 405  407          {
 406  408              return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 407  409          }
 408  410  
 409  411          /*
 410  412           * If the Region Address and Length have not been previously evaluated,
 411  413           * evaluate them now and save the results.
 412  414           */
 413  415          if (!(ObjDesc->Common.Flags & AOPOBJ_DATA_VALID))
 414  416          {
 415  417              Status = AcpiDsGetRegionArguments (ObjDesc);
 416  418              if (ACPI_FAILURE (Status))
 417  419              {
 418  420                  return_ACPI_STATUS (Status);
 419  421              }
 420  422          }
 421  423  
 422  424          /* Get the table header first so we can get the table length */
 423  425  
 424  426          Table = ACPI_ALLOCATE (sizeof (ACPI_TABLE_HEADER));
 425  427          if (!Table)
 426  428          {
 427  429              return_ACPI_STATUS (AE_NO_MEMORY);
 428  430          }
 429  431  
 430  432          Status = AcpiExRegionRead (ObjDesc, sizeof (ACPI_TABLE_HEADER),
 431  433                      ACPI_CAST_PTR (UINT8, Table));
 432  434          Length = Table->Length;
 433  435          ACPI_FREE (Table);
 434  436  
 435  437          if (ACPI_FAILURE (Status))
 436  438          {
 437  439              return_ACPI_STATUS (Status);
 438  440          }
 439  441  
 440  442          /* Must have at least an ACPI table header */
 441  443  
 442  444          if (Length < sizeof (ACPI_TABLE_HEADER))
 443  445          {
 444  446              return_ACPI_STATUS (AE_INVALID_TABLE_LENGTH);
 445  447          }
 446  448  
 447  449          /*
 448  450           * The original implementation simply mapped the table, with no copy.
 449  451           * However, the memory region is not guaranteed to remain stable and
 450  452           * we must copy the table to a local buffer. For example, the memory
 451  453           * region is corrupted after suspend on some machines. Dynamically
 452  454           * loaded tables are usually small, so this overhead is minimal.
 453  455           *
 454  456           * The latest implementation (5/2009) does not use a mapping at all.
 455  457           * We use the low-level operation region interface to read the table
 456  458           * instead of the obvious optimization of using a direct mapping.
 457  459           * This maintains a consistent use of operation regions across the
 458  460           * entire subsystem. This is important if additional processing must
 459  461           * be performed in the (possibly user-installed) operation region
 460  462           * handler. For example, AcpiExec and ASLTS depend on this.
 461  463           */
 462  464  
 463  465          /* Allocate a buffer for the table */
 464  466  
 465  467          TableDesc.Pointer = ACPI_ALLOCATE (Length);
 466  468          if (!TableDesc.Pointer)
 467  469          {
 468  470              return_ACPI_STATUS (AE_NO_MEMORY);
 469  471          }
 470  472  
 471  473          /* Read the entire table */
 472  474  
 473  475          Status = AcpiExRegionRead (ObjDesc, Length,
  
    | ↓ open down ↓ | 126 lines elided | ↑ open up ↑ | 
 474  476                      ACPI_CAST_PTR (UINT8, TableDesc.Pointer));
 475  477          if (ACPI_FAILURE (Status))
 476  478          {
 477  479              ACPI_FREE (TableDesc.Pointer);
 478  480              return_ACPI_STATUS (Status);
 479  481          }
 480  482  
 481  483          TableDesc.Address = ObjDesc->Region.Address;
 482  484          break;
 483  485  
 484      -
 485  486      case ACPI_TYPE_BUFFER: /* Buffer or resolved RegionField */
 486  487  
 487  488          ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
 488  489              "Load table from Buffer or Field %p\n", ObjDesc));
 489  490  
 490  491          /* Must have at least an ACPI table header */
 491  492  
 492  493          if (ObjDesc->Buffer.Length < sizeof (ACPI_TABLE_HEADER))
 493  494          {
 494  495              return_ACPI_STATUS (AE_INVALID_TABLE_LENGTH);
 495  496          }
 496  497  
 497  498          /* Get the actual table length from the table header */
 498  499  
 499  500          Table = ACPI_CAST_PTR (ACPI_TABLE_HEADER, ObjDesc->Buffer.Pointer);
 500  501          Length = Table->Length;
 501  502  
 502  503          /* Table cannot extend beyond the buffer */
 503  504  
 504  505          if (Length > ObjDesc->Buffer.Length)
 505  506          {
 506  507              return_ACPI_STATUS (AE_AML_BUFFER_LIMIT);
 507  508          }
 508  509          if (Length < sizeof (ACPI_TABLE_HEADER))
 509  510          {
 510  511              return_ACPI_STATUS (AE_INVALID_TABLE_LENGTH);
 511  512          }
 512  513  
 513  514          /*
 514  515           * Copy the table from the buffer because the buffer could be modified
 515  516           * or even deleted in the future
 516  517           */
  
    | ↓ open down ↓ | 22 lines elided | ↑ open up ↑ | 
 517  518          TableDesc.Pointer = ACPI_ALLOCATE (Length);
 518  519          if (!TableDesc.Pointer)
 519  520          {
 520  521              return_ACPI_STATUS (AE_NO_MEMORY);
 521  522          }
 522  523  
 523  524          ACPI_MEMCPY (TableDesc.Pointer, Table, Length);
 524  525          TableDesc.Address = ACPI_TO_INTEGER (TableDesc.Pointer);
 525  526          break;
 526  527  
 527      -
 528  528      default:
      529 +
 529  530          return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 530  531      }
 531  532  
 532  533      /* Validate table checksum (will not get validated in TbAddTable) */
 533  534  
 534  535      Status = AcpiTbVerifyChecksum (TableDesc.Pointer, Length);
 535  536      if (ACPI_FAILURE (Status))
 536  537      {
 537  538          ACPI_FREE (TableDesc.Pointer);
 538  539          return_ACPI_STATUS (Status);
 539  540      }
 540  541  
 541  542      /* Complete the table descriptor */
 542  543  
 543  544      TableDesc.Length = Length;
 544  545      TableDesc.Flags = ACPI_TABLE_ORIGIN_ALLOCATED;
 545  546  
 546  547      /* Install the new table into the local data structures */
 547  548  
 548  549      Status = AcpiTbAddTable (&TableDesc, &TableIndex);
 549  550      if (ACPI_FAILURE (Status))
 550  551      {
 551  552          /* Delete allocated table buffer */
 552  553  
 553  554          AcpiTbDeleteTable (&TableDesc);
 554  555          return_ACPI_STATUS (Status);
 555  556      }
 556  557  
 557  558      /*
 558  559       * Add the table to the namespace.
 559  560       *
 560  561       * Note: Load the table objects relative to the root of the namespace.
 561  562       * This appears to go against the ACPI specification, but we do it for
 562  563       * compatibility with other ACPI implementations.
 563  564       */
 564  565      Status = AcpiExAddTable (TableIndex, AcpiGbl_RootNode, &DdbHandle);
 565  566      if (ACPI_FAILURE (Status))
 566  567      {
 567  568          /* On error, TablePtr was deallocated above */
 568  569  
 569  570          return_ACPI_STATUS (Status);
 570  571      }
 571  572  
 572  573      /* Store the DdbHandle into the Target operand */
 573  574  
 574  575      Status = AcpiExStore (DdbHandle, Target, WalkState);
 575  576      if (ACPI_FAILURE (Status))
 576  577      {
 577  578          (void) AcpiExUnloadTable (DdbHandle);
 578  579  
 579  580          /* TablePtr was deallocated above */
 580  581  
 581  582          AcpiUtRemoveReference (DdbHandle);
 582  583          return_ACPI_STATUS (Status);
 583  584      }
 584  585  
 585  586      ACPI_INFO ((AE_INFO, "Dynamic OEM Table Load:"));
 586  587      AcpiTbPrintTableHeader (0, TableDesc.Pointer);
 587  588  
 588  589      /* Remove the reference by added by AcpiExStore above */
 589  590  
 590  591      AcpiUtRemoveReference (DdbHandle);
 591  592  
 592  593      /* Invoke table handler if present */
 593  594  
 594  595      if (AcpiGbl_TableHandler)
 595  596      {
 596  597          (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_LOAD, TableDesc.Pointer,
 597  598                      AcpiGbl_TableHandlerContext);
 598  599      }
 599  600  
 600  601      return_ACPI_STATUS (Status);
 601  602  }
 602  603  
 603  604  
 604  605  /*******************************************************************************
 605  606   *
 606  607   * FUNCTION:    AcpiExUnloadTable
 607  608   *
 608  609   * PARAMETERS:  DdbHandle           - Handle to a previously loaded table
 609  610   *
 610  611   * RETURN:      Status
 611  612   *
 612  613   * DESCRIPTION: Unload an ACPI table
 613  614   *
 614  615   ******************************************************************************/
 615  616  
 616  617  ACPI_STATUS
 617  618  AcpiExUnloadTable (
 618  619      ACPI_OPERAND_OBJECT     *DdbHandle)
 619  620  {
 620  621      ACPI_STATUS             Status = AE_OK;
 621  622      ACPI_OPERAND_OBJECT     *TableDesc = DdbHandle;
 622  623      UINT32                  TableIndex;
 623  624      ACPI_TABLE_HEADER       *Table;
 624  625  
 625  626  
 626  627      ACPI_FUNCTION_TRACE (ExUnloadTable);
 627  628  
 628  629  
 629  630      /*
 630  631       * Validate the handle
 631  632       * Although the handle is partially validated in AcpiExReconfiguration()
 632  633       * when it calls AcpiExResolveOperands(), the handle is more completely
 633  634       * validated here.
  
    | ↓ open down ↓ | 95 lines elided | ↑ open up ↑ | 
 634  635       *
 635  636       * Handle must be a valid operand object of type reference. Also, the
 636  637       * DdbHandle must still be marked valid (table has not been previously
 637  638       * unloaded)
 638  639       */
 639  640      if ((!DdbHandle) ||
 640  641          (ACPI_GET_DESCRIPTOR_TYPE (DdbHandle) != ACPI_DESC_TYPE_OPERAND) ||
 641  642          (DdbHandle->Common.Type != ACPI_TYPE_LOCAL_REFERENCE) ||
 642  643          (!(DdbHandle->Common.Flags & AOPOBJ_DATA_VALID)))
 643  644      {
 644      -        return_ACPI_STATUS (AE_BAD_PARAMETER);
      645 +        return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 645  646      }
 646  647  
 647  648      /* Get the table index from the DdbHandle */
 648  649  
 649  650      TableIndex = TableDesc->Reference.Value;
 650  651  
 651  652      /* Ensure the table is still loaded */
 652  653  
 653  654      if (!AcpiTbIsTableLoaded (TableIndex))
 654  655      {
 655  656          return_ACPI_STATUS (AE_NOT_EXIST);
 656  657      }
 657  658  
 658  659      /* Invoke table handler if present */
 659  660  
 660  661      if (AcpiGbl_TableHandler)
 661  662      {
 662  663          Status = AcpiGetTableByIndex (TableIndex, &Table);
 663  664          if (ACPI_SUCCESS (Status))
 664  665          {
 665  666              (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_UNLOAD, Table,
 666  667                          AcpiGbl_TableHandlerContext);
 667  668          }
 668  669      }
 669  670  
 670  671      /* Delete the portion of the namespace owned by this table */
 671  672  
 672  673      Status = AcpiTbDeleteNamespaceByOwner (TableIndex);
 673  674      if (ACPI_FAILURE (Status))
 674  675      {
 675  676          return_ACPI_STATUS (Status);
 676  677      }
 677  678  
  
    | ↓ open down ↓ | 23 lines elided | ↑ open up ↑ | 
 678  679      (void) AcpiTbReleaseOwnerId (TableIndex);
 679  680      AcpiTbSetTableLoadedFlag (TableIndex, FALSE);
 680  681  
 681  682      /*
 682  683       * Invalidate the handle. We do this because the handle may be stored
 683  684       * in a named object and may not be actually deleted until much later.
 684  685       */
 685  686      DdbHandle->Common.Flags &= ~AOPOBJ_DATA_VALID;
 686  687      return_ACPI_STATUS (AE_OK);
 687  688  }
 688      -
    
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX