1 /******************************************************************************
2 *
3 * Module Name: evxfgpe - External Interfaces for General Purpose Events (GPEs)
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2011, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44
45 #define __EVXFGPE_C__
46
47 #include "acpi.h"
48 #include "accommon.h"
49 #include "acevents.h"
50 #include "acnamesp.h"
51
52 #define _COMPONENT ACPI_EVENTS
53 ACPI_MODULE_NAME ("evxfgpe")
54
55
56 /*******************************************************************************
57 *
58 * FUNCTION: AcpiUpdateAllGpes
59 *
60 * PARAMETERS: None
61 *
62 * RETURN: Status
63 *
64 * DESCRIPTION: Complete GPE initialization and enable all GPEs that have
65 * associated _Lxx or _Exx methods and are not pointed to by any
66 * device _PRW methods (this indicates that these GPEs are
67 * generally intended for system or device wakeup. Such GPEs
68 * have to be enabled directly when the devices whose _PRW
69 * methods point to them are set up for wakeup signaling.)
70 *
71 * NOTE: Should be called after any GPEs are added to the system. Primarily,
72 * after the system _PRW methods have been run, but also after a GPE Block
73 * Device has been added or if any new GPE methods have been added via a
74 * dynamic table load.
75 *
76 ******************************************************************************/
77
78 ACPI_STATUS
79 AcpiUpdateAllGpes (
80 void)
81 {
82 ACPI_STATUS Status;
83
84
85 ACPI_FUNCTION_TRACE (AcpiUpdateGpes);
86
87
88 Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS);
89 if (ACPI_FAILURE (Status))
90 {
91 return_ACPI_STATUS (Status);
92 }
93
94 if (AcpiGbl_AllGpesInitialized)
95 {
96 goto UnlockAndExit;
97 }
98
99 Status = AcpiEvWalkGpeList (AcpiEvInitializeGpeBlock, NULL);
100 if (ACPI_SUCCESS (Status))
101 {
102 AcpiGbl_AllGpesInitialized = TRUE;
103 }
104
105 UnlockAndExit:
232
233 ACPI_FUNCTION_TRACE (AcpiSetGpe);
234
235
236 Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock);
237
238 /* Ensure that we have a valid GPE number */
239
240 GpeEventInfo = AcpiEvGetGpeEventInfo (GpeDevice, GpeNumber);
241 if (!GpeEventInfo)
242 {
243 Status = AE_BAD_PARAMETER;
244 goto UnlockAndExit;
245 }
246
247 /* Perform the action */
248
249 switch (Action)
250 {
251 case ACPI_GPE_ENABLE:
252 Status = AcpiEvEnableGpe (GpeEventInfo);
253 break;
254
255 case ACPI_GPE_DISABLE:
256 Status = AcpiHwLowSetGpe (GpeEventInfo, ACPI_GPE_DISABLE);
257 break;
258
259 default:
260 Status = AE_BAD_PARAMETER;
261 break;
262 }
263
264 UnlockAndExit:
265 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags);
266 return_ACPI_STATUS (Status);
267 }
268
269 ACPI_EXPORT_SYMBOL (AcpiSetGpe)
270
271
272 /*******************************************************************************
273 *
274 * FUNCTION: AcpiSetupGpeForWake
275 *
276 * PARAMETERS: WakeDevice - Device associated with the GPE (via _PRW)
277 * GpeDevice - Parent GPE Device. NULL for GPE0/GPE1
278 * GpeNumber - GPE level within the GPE block
279 *
280 * RETURN: Status
281 *
282 * DESCRIPTION: Mark a GPE as having the ability to wake the system. This
283 * interface is intended to be used as the host executes the
284 * _PRW methods (Power Resources for Wake) in the system tables.
285 * Each _PRW appears under a Device Object (The WakeDevice), and
286 * contains the info for the wake GPE associated with the
287 * WakeDevice.
288 *
289 ******************************************************************************/
290
291 ACPI_STATUS
292 AcpiSetupGpeForWake (
293 ACPI_HANDLE WakeDevice,
294 ACPI_HANDLE GpeDevice,
295 UINT32 GpeNumber)
296 {
297 ACPI_STATUS Status = AE_BAD_PARAMETER;
298 ACPI_GPE_EVENT_INFO *GpeEventInfo;
299 ACPI_NAMESPACE_NODE *DeviceNode;
300 ACPI_CPU_FLAGS Flags;
301
302
303 ACPI_FUNCTION_TRACE (AcpiSetupGpeForWake);
304
305
306 /* Parameter Validation */
307
308 if (!WakeDevice)
309 {
310 /*
311 * By forcing WakeDevice to be valid, we automatically enable the
312 * implicit notify feature on all hosts.
313 */
314 return_ACPI_STATUS (AE_BAD_PARAMETER);
315 }
316
317 /* Handle root object case */
318
319 if (WakeDevice == ACPI_ROOT_OBJECT)
320 {
321 DeviceNode = AcpiGbl_RootNode;
322 }
323 else
324 {
325 DeviceNode = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, WakeDevice);
326 }
327
328 /* Validate WakeDevice is of type Device */
329
330 if (DeviceNode->Type != ACPI_TYPE_DEVICE)
331 {
332 return_ACPI_STATUS (AE_BAD_PARAMETER);
333 }
334
335 Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock);
336
337 /* Ensure that we have a valid GPE number */
338
339 GpeEventInfo = AcpiEvGetGpeEventInfo (GpeDevice, GpeNumber);
340 if (GpeEventInfo)
341 {
342 /*
343 * If there is no method or handler for this GPE, then the
344 * WakeDevice will be notified whenever this GPE fires (aka
345 * "implicit notify") Note: The GPE is assumed to be
346 * level-triggered (for windows compatibility).
347 */
348 if ((GpeEventInfo->Flags & ACPI_GPE_DISPATCH_MASK) ==
349 ACPI_GPE_DISPATCH_NONE)
350 {
351 GpeEventInfo->Flags =
352 (ACPI_GPE_DISPATCH_NOTIFY | ACPI_GPE_LEVEL_TRIGGERED);
353 GpeEventInfo->Dispatch.DeviceNode = DeviceNode;
354 }
355
356 GpeEventInfo->Flags |= ACPI_GPE_CAN_WAKE;
357 Status = AE_OK;
358 }
359
360 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags);
361 return_ACPI_STATUS (Status);
362 }
363
364 ACPI_EXPORT_SYMBOL (AcpiSetupGpeForWake)
365
366
367 /*******************************************************************************
368 *
369 * FUNCTION: AcpiSetGpeWakeMask
370 *
371 * PARAMETERS: GpeDevice - Parent GPE Device. NULL for GPE0/GPE1
372 * GpeNumber - GPE level within the GPE block
373 * Action - Enable or Disable
374 *
375 * RETURN: Status
376 *
377 * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. The GPE must
378 * already be marked as a WAKE GPE.
379 *
380 ******************************************************************************/
404 GpeEventInfo = AcpiEvGetGpeEventInfo (GpeDevice, GpeNumber);
405 if (!GpeEventInfo)
406 {
407 Status = AE_BAD_PARAMETER;
408 goto UnlockAndExit;
409 }
410
411 if (!(GpeEventInfo->Flags & ACPI_GPE_CAN_WAKE))
412 {
413 Status = AE_TYPE;
414 goto UnlockAndExit;
415 }
416
417 GpeRegisterInfo = GpeEventInfo->RegisterInfo;
418 if (!GpeRegisterInfo)
419 {
420 Status = AE_NOT_EXIST;
421 goto UnlockAndExit;
422 }
423
424 RegisterBit = AcpiHwGetGpeRegisterBit (GpeEventInfo, GpeRegisterInfo);
425
426 /* Perform the action */
427
428 switch (Action)
429 {
430 case ACPI_GPE_ENABLE:
431 ACPI_SET_BIT (GpeRegisterInfo->EnableForWake, (UINT8) RegisterBit);
432 break;
433
434 case ACPI_GPE_DISABLE:
435 ACPI_CLEAR_BIT (GpeRegisterInfo->EnableForWake, (UINT8) RegisterBit);
436 break;
437
438 default:
439 ACPI_ERROR ((AE_INFO, "%u, Invalid action", Action));
440 Status = AE_BAD_PARAMETER;
441 break;
442 }
443
444 UnlockAndExit:
445 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags);
446 return_ACPI_STATUS (Status);
447 }
448
449 ACPI_EXPORT_SYMBOL (AcpiSetGpeWakeMask)
450
451
452 /*******************************************************************************
453 *
454 * FUNCTION: AcpiClearGpe
455 *
456 * PARAMETERS: GpeDevice - Parent GPE Device. NULL for GPE0/GPE1
457 * GpeNumber - GPE level within the GPE block
458 *
698 {
699 ACPI_STATUS Status;
700 ACPI_OPERAND_OBJECT *ObjDesc;
701 ACPI_NAMESPACE_NODE *Node;
702 ACPI_GPE_BLOCK_INFO *GpeBlock;
703
704
705 ACPI_FUNCTION_TRACE (AcpiInstallGpeBlock);
706
707
708 if ((!GpeDevice) ||
709 (!GpeBlockAddress) ||
710 (!RegisterCount))
711 {
712 return_ACPI_STATUS (AE_BAD_PARAMETER);
713 }
714
715 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
716 if (ACPI_FAILURE (Status))
717 {
718 return (Status);
719 }
720
721 Node = AcpiNsValidateHandle (GpeDevice);
722 if (!Node)
723 {
724 Status = AE_BAD_PARAMETER;
725 goto UnlockAndExit;
726 }
727
728 /*
729 * For user-installed GPE Block Devices, the GpeBlockBaseNumber
730 * is always zero
731 */
732 Status = AcpiEvCreateGpeBlock (Node, GpeBlockAddress, RegisterCount,
733 0, InterruptNumber, &GpeBlock);
734 if (ACPI_FAILURE (Status))
735 {
736 goto UnlockAndExit;
737 }
738
791 ACPI_STATUS
792 AcpiRemoveGpeBlock (
793 ACPI_HANDLE GpeDevice)
794 {
795 ACPI_OPERAND_OBJECT *ObjDesc;
796 ACPI_STATUS Status;
797 ACPI_NAMESPACE_NODE *Node;
798
799
800 ACPI_FUNCTION_TRACE (AcpiRemoveGpeBlock);
801
802
803 if (!GpeDevice)
804 {
805 return_ACPI_STATUS (AE_BAD_PARAMETER);
806 }
807
808 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
809 if (ACPI_FAILURE (Status))
810 {
811 return (Status);
812 }
813
814 Node = AcpiNsValidateHandle (GpeDevice);
815 if (!Node)
816 {
817 Status = AE_BAD_PARAMETER;
818 goto UnlockAndExit;
819 }
820
821 /* Get the DeviceObject attached to the node */
822
823 ObjDesc = AcpiNsGetAttachedObject (Node);
824 if (!ObjDesc ||
825 !ObjDesc->Device.GpeBlock)
826 {
827 return_ACPI_STATUS (AE_NULL_OBJECT);
828 }
829
830 /* Delete the GPE block (but not the DeviceObject) */
831
881 }
882
883 /* Setup and walk the GPE list */
884
885 Info.Index = Index;
886 Info.Status = AE_NOT_EXIST;
887 Info.GpeDevice = NULL;
888 Info.NextBlockBaseIndex = 0;
889
890 Status = AcpiEvWalkGpeList (AcpiEvGetGpeDevice, &Info);
891 if (ACPI_FAILURE (Status))
892 {
893 return_ACPI_STATUS (Status);
894 }
895
896 *GpeDevice = ACPI_CAST_PTR (ACPI_HANDLE, Info.GpeDevice);
897 return_ACPI_STATUS (Info.Status);
898 }
899
900 ACPI_EXPORT_SYMBOL (AcpiGetGpeDevice)
|
1 /******************************************************************************
2 *
3 * Module Name: evxfgpe - External Interfaces for General Purpose Events (GPEs)
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2013, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44
45 #define __EVXFGPE_C__
46 #define EXPORT_ACPI_INTERFACES
47
48 #include "acpi.h"
49 #include "accommon.h"
50 #include "acevents.h"
51 #include "acnamesp.h"
52
53 #define _COMPONENT ACPI_EVENTS
54 ACPI_MODULE_NAME ("evxfgpe")
55
56
57 #if (!ACPI_REDUCED_HARDWARE) /* Entire module */
58 /*******************************************************************************
59 *
60 * FUNCTION: AcpiUpdateAllGpes
61 *
62 * PARAMETERS: None
63 *
64 * RETURN: Status
65 *
66 * DESCRIPTION: Complete GPE initialization and enable all GPEs that have
67 * associated _Lxx or _Exx methods and are not pointed to by any
68 * device _PRW methods (this indicates that these GPEs are
69 * generally intended for system or device wakeup. Such GPEs
70 * have to be enabled directly when the devices whose _PRW
71 * methods point to them are set up for wakeup signaling.)
72 *
73 * NOTE: Should be called after any GPEs are added to the system. Primarily,
74 * after the system _PRW methods have been run, but also after a GPE Block
75 * Device has been added or if any new GPE methods have been added via a
76 * dynamic table load.
77 *
78 ******************************************************************************/
79
80 ACPI_STATUS
81 AcpiUpdateAllGpes (
82 void)
83 {
84 ACPI_STATUS Status;
85
86
87 ACPI_FUNCTION_TRACE (AcpiUpdateAllGpes);
88
89
90 Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS);
91 if (ACPI_FAILURE (Status))
92 {
93 return_ACPI_STATUS (Status);
94 }
95
96 if (AcpiGbl_AllGpesInitialized)
97 {
98 goto UnlockAndExit;
99 }
100
101 Status = AcpiEvWalkGpeList (AcpiEvInitializeGpeBlock, NULL);
102 if (ACPI_SUCCESS (Status))
103 {
104 AcpiGbl_AllGpesInitialized = TRUE;
105 }
106
107 UnlockAndExit:
234
235 ACPI_FUNCTION_TRACE (AcpiSetGpe);
236
237
238 Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock);
239
240 /* Ensure that we have a valid GPE number */
241
242 GpeEventInfo = AcpiEvGetGpeEventInfo (GpeDevice, GpeNumber);
243 if (!GpeEventInfo)
244 {
245 Status = AE_BAD_PARAMETER;
246 goto UnlockAndExit;
247 }
248
249 /* Perform the action */
250
251 switch (Action)
252 {
253 case ACPI_GPE_ENABLE:
254
255 Status = AcpiEvEnableGpe (GpeEventInfo);
256 break;
257
258 case ACPI_GPE_DISABLE:
259
260 Status = AcpiHwLowSetGpe (GpeEventInfo, ACPI_GPE_DISABLE);
261 break;
262
263 default:
264
265 Status = AE_BAD_PARAMETER;
266 break;
267 }
268
269 UnlockAndExit:
270 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags);
271 return_ACPI_STATUS (Status);
272 }
273
274 ACPI_EXPORT_SYMBOL (AcpiSetGpe)
275
276
277 /*******************************************************************************
278 *
279 * FUNCTION: AcpiSetupGpeForWake
280 *
281 * PARAMETERS: WakeDevice - Device associated with the GPE (via _PRW)
282 * GpeDevice - Parent GPE Device. NULL for GPE0/GPE1
283 * GpeNumber - GPE level within the GPE block
284 *
285 * RETURN: Status
286 *
287 * DESCRIPTION: Mark a GPE as having the ability to wake the system. This
288 * interface is intended to be used as the host executes the
289 * _PRW methods (Power Resources for Wake) in the system tables.
290 * Each _PRW appears under a Device Object (The WakeDevice), and
291 * contains the info for the wake GPE associated with the
292 * WakeDevice.
293 *
294 ******************************************************************************/
295
296 ACPI_STATUS
297 AcpiSetupGpeForWake (
298 ACPI_HANDLE WakeDevice,
299 ACPI_HANDLE GpeDevice,
300 UINT32 GpeNumber)
301 {
302 ACPI_STATUS Status;
303 ACPI_GPE_EVENT_INFO *GpeEventInfo;
304 ACPI_NAMESPACE_NODE *DeviceNode;
305 ACPI_GPE_NOTIFY_INFO *Notify;
306 ACPI_GPE_NOTIFY_INFO *NewNotify;
307 ACPI_CPU_FLAGS Flags;
308
309
310 ACPI_FUNCTION_TRACE (AcpiSetupGpeForWake);
311
312
313 /* Parameter Validation */
314
315 if (!WakeDevice)
316 {
317 /*
318 * By forcing WakeDevice to be valid, we automatically enable the
319 * implicit notify feature on all hosts.
320 */
321 return_ACPI_STATUS (AE_BAD_PARAMETER);
322 }
323
324 /* Handle root object case */
325
326 if (WakeDevice == ACPI_ROOT_OBJECT)
327 {
328 DeviceNode = AcpiGbl_RootNode;
329 }
330 else
331 {
332 DeviceNode = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, WakeDevice);
333 }
334
335 /* Validate WakeDevice is of type Device */
336
337 if (DeviceNode->Type != ACPI_TYPE_DEVICE)
338 {
339 return_ACPI_STATUS (AE_BAD_PARAMETER);
340 }
341
342 /*
343 * Allocate a new notify object up front, in case it is needed.
344 * Memory allocation while holding a spinlock is a big no-no
345 * on some hosts.
346 */
347 NewNotify = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_GPE_NOTIFY_INFO));
348 if (!NewNotify)
349 {
350 return_ACPI_STATUS (AE_NO_MEMORY);
351 }
352
353 Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock);
354
355 /* Ensure that we have a valid GPE number */
356
357 GpeEventInfo = AcpiEvGetGpeEventInfo (GpeDevice, GpeNumber);
358 if (!GpeEventInfo)
359 {
360 Status = AE_BAD_PARAMETER;
361 goto UnlockAndExit;
362 }
363
364 /*
365 * If there is no method or handler for this GPE, then the
366 * WakeDevice will be notified whenever this GPE fires. This is
367 * known as an "implicit notify". Note: The GPE is assumed to be
368 * level-triggered (for windows compatibility).
369 */
370 if ((GpeEventInfo->Flags & ACPI_GPE_DISPATCH_MASK) ==
371 ACPI_GPE_DISPATCH_NONE)
372 {
373 /*
374 * This is the first device for implicit notify on this GPE.
375 * Just set the flags here, and enter the NOTIFY block below.
376 */
377 GpeEventInfo->Flags =
378 (ACPI_GPE_DISPATCH_NOTIFY | ACPI_GPE_LEVEL_TRIGGERED);
379 }
380
381 /*
382 * If we already have an implicit notify on this GPE, add
383 * this device to the notify list.
384 */
385 if ((GpeEventInfo->Flags & ACPI_GPE_DISPATCH_MASK) ==
386 ACPI_GPE_DISPATCH_NOTIFY)
387 {
388 /* Ensure that the device is not already in the list */
389
390 Notify = GpeEventInfo->Dispatch.NotifyList;
391 while (Notify)
392 {
393 if (Notify->DeviceNode == DeviceNode)
394 {
395 Status = AE_ALREADY_EXISTS;
396 goto UnlockAndExit;
397 }
398 Notify = Notify->Next;
399 }
400
401 /* Add this device to the notify list for this GPE */
402
403 NewNotify->DeviceNode = DeviceNode;
404 NewNotify->Next = GpeEventInfo->Dispatch.NotifyList;
405 GpeEventInfo->Dispatch.NotifyList = NewNotify;
406 NewNotify = NULL;
407 }
408
409 /* Mark the GPE as a possible wake event */
410
411 GpeEventInfo->Flags |= ACPI_GPE_CAN_WAKE;
412 Status = AE_OK;
413
414
415 UnlockAndExit:
416 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags);
417
418 /* Delete the notify object if it was not used above */
419
420 if (NewNotify)
421 {
422 ACPI_FREE (NewNotify);
423 }
424 return_ACPI_STATUS (Status);
425 }
426
427 ACPI_EXPORT_SYMBOL (AcpiSetupGpeForWake)
428
429
430 /*******************************************************************************
431 *
432 * FUNCTION: AcpiSetGpeWakeMask
433 *
434 * PARAMETERS: GpeDevice - Parent GPE Device. NULL for GPE0/GPE1
435 * GpeNumber - GPE level within the GPE block
436 * Action - Enable or Disable
437 *
438 * RETURN: Status
439 *
440 * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. The GPE must
441 * already be marked as a WAKE GPE.
442 *
443 ******************************************************************************/
467 GpeEventInfo = AcpiEvGetGpeEventInfo (GpeDevice, GpeNumber);
468 if (!GpeEventInfo)
469 {
470 Status = AE_BAD_PARAMETER;
471 goto UnlockAndExit;
472 }
473
474 if (!(GpeEventInfo->Flags & ACPI_GPE_CAN_WAKE))
475 {
476 Status = AE_TYPE;
477 goto UnlockAndExit;
478 }
479
480 GpeRegisterInfo = GpeEventInfo->RegisterInfo;
481 if (!GpeRegisterInfo)
482 {
483 Status = AE_NOT_EXIST;
484 goto UnlockAndExit;
485 }
486
487 RegisterBit = AcpiHwGetGpeRegisterBit (GpeEventInfo);
488
489 /* Perform the action */
490
491 switch (Action)
492 {
493 case ACPI_GPE_ENABLE:
494
495 ACPI_SET_BIT (GpeRegisterInfo->EnableForWake, (UINT8) RegisterBit);
496 break;
497
498 case ACPI_GPE_DISABLE:
499
500 ACPI_CLEAR_BIT (GpeRegisterInfo->EnableForWake, (UINT8) RegisterBit);
501 break;
502
503 default:
504
505 ACPI_ERROR ((AE_INFO, "%u, Invalid action", Action));
506 Status = AE_BAD_PARAMETER;
507 break;
508 }
509
510 UnlockAndExit:
511 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags);
512 return_ACPI_STATUS (Status);
513 }
514
515 ACPI_EXPORT_SYMBOL (AcpiSetGpeWakeMask)
516
517
518 /*******************************************************************************
519 *
520 * FUNCTION: AcpiClearGpe
521 *
522 * PARAMETERS: GpeDevice - Parent GPE Device. NULL for GPE0/GPE1
523 * GpeNumber - GPE level within the GPE block
524 *
764 {
765 ACPI_STATUS Status;
766 ACPI_OPERAND_OBJECT *ObjDesc;
767 ACPI_NAMESPACE_NODE *Node;
768 ACPI_GPE_BLOCK_INFO *GpeBlock;
769
770
771 ACPI_FUNCTION_TRACE (AcpiInstallGpeBlock);
772
773
774 if ((!GpeDevice) ||
775 (!GpeBlockAddress) ||
776 (!RegisterCount))
777 {
778 return_ACPI_STATUS (AE_BAD_PARAMETER);
779 }
780
781 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
782 if (ACPI_FAILURE (Status))
783 {
784 return_ACPI_STATUS (Status);
785 }
786
787 Node = AcpiNsValidateHandle (GpeDevice);
788 if (!Node)
789 {
790 Status = AE_BAD_PARAMETER;
791 goto UnlockAndExit;
792 }
793
794 /*
795 * For user-installed GPE Block Devices, the GpeBlockBaseNumber
796 * is always zero
797 */
798 Status = AcpiEvCreateGpeBlock (Node, GpeBlockAddress, RegisterCount,
799 0, InterruptNumber, &GpeBlock);
800 if (ACPI_FAILURE (Status))
801 {
802 goto UnlockAndExit;
803 }
804
857 ACPI_STATUS
858 AcpiRemoveGpeBlock (
859 ACPI_HANDLE GpeDevice)
860 {
861 ACPI_OPERAND_OBJECT *ObjDesc;
862 ACPI_STATUS Status;
863 ACPI_NAMESPACE_NODE *Node;
864
865
866 ACPI_FUNCTION_TRACE (AcpiRemoveGpeBlock);
867
868
869 if (!GpeDevice)
870 {
871 return_ACPI_STATUS (AE_BAD_PARAMETER);
872 }
873
874 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
875 if (ACPI_FAILURE (Status))
876 {
877 return_ACPI_STATUS (Status);
878 }
879
880 Node = AcpiNsValidateHandle (GpeDevice);
881 if (!Node)
882 {
883 Status = AE_BAD_PARAMETER;
884 goto UnlockAndExit;
885 }
886
887 /* Get the DeviceObject attached to the node */
888
889 ObjDesc = AcpiNsGetAttachedObject (Node);
890 if (!ObjDesc ||
891 !ObjDesc->Device.GpeBlock)
892 {
893 return_ACPI_STATUS (AE_NULL_OBJECT);
894 }
895
896 /* Delete the GPE block (but not the DeviceObject) */
897
947 }
948
949 /* Setup and walk the GPE list */
950
951 Info.Index = Index;
952 Info.Status = AE_NOT_EXIST;
953 Info.GpeDevice = NULL;
954 Info.NextBlockBaseIndex = 0;
955
956 Status = AcpiEvWalkGpeList (AcpiEvGetGpeDevice, &Info);
957 if (ACPI_FAILURE (Status))
958 {
959 return_ACPI_STATUS (Status);
960 }
961
962 *GpeDevice = ACPI_CAST_PTR (ACPI_HANDLE, Info.GpeDevice);
963 return_ACPI_STATUS (Info.Status);
964 }
965
966 ACPI_EXPORT_SYMBOL (AcpiGetGpeDevice)
967
968 #endif /* !ACPI_REDUCED_HARDWARE */
|