1 /****************************************************************************** 2 * 3 * Module Name: dsfield - Dispatcher field routines 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2011, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #define __DSFIELD_C__ 45 46 #include "acpi.h" 47 #include "accommon.h" 48 #include "amlcode.h" 49 #include "acdispat.h" 50 #include "acinterp.h" 51 #include "acnamesp.h" 52 #include "acparser.h" 53 54 55 #define _COMPONENT ACPI_DISPATCHER 56 ACPI_MODULE_NAME ("dsfield") 57 58 /* Local prototypes */ 59 60 static ACPI_STATUS 61 AcpiDsGetFieldNames ( 62 ACPI_CREATE_FIELD_INFO *Info, 63 ACPI_WALK_STATE *WalkState, 64 ACPI_PARSE_OBJECT *Arg); 65 66 67 /******************************************************************************* 68 * 69 * FUNCTION: AcpiDsCreateBufferField 70 * 71 * PARAMETERS: Op - Current parse op (CreateXXField) 72 * WalkState - Current state 73 * 74 * RETURN: Status 75 * 76 * DESCRIPTION: Execute the CreateField operators: 77 * CreateBitFieldOp, 78 * CreateByteFieldOp, 79 * CreateWordFieldOp, 80 * CreateDWordFieldOp, 81 * CreateQWordFieldOp, 82 * CreateFieldOp (all of which define a field in a buffer) 83 * 84 ******************************************************************************/ 85 86 ACPI_STATUS 87 AcpiDsCreateBufferField ( 88 ACPI_PARSE_OBJECT *Op, 89 ACPI_WALK_STATE *WalkState) 90 { 91 ACPI_PARSE_OBJECT *Arg; 92 ACPI_NAMESPACE_NODE *Node; 93 ACPI_STATUS Status; 94 ACPI_OPERAND_OBJECT *ObjDesc; 95 ACPI_OPERAND_OBJECT *SecondDesc = NULL; 96 UINT32 Flags; 97 98 99 ACPI_FUNCTION_TRACE (DsCreateBufferField); 100 101 102 /* 103 * Get the NameString argument (name of the new BufferField) 104 */ 105 if (Op->Common.AmlOpcode == AML_CREATE_FIELD_OP) 106 { 107 /* For CreateField, name is the 4th argument */ 108 109 Arg = AcpiPsGetArg (Op, 3); 110 } 111 else 112 { 113 /* For all other CreateXXXField operators, name is the 3rd argument */ 114 115 Arg = AcpiPsGetArg (Op, 2); 116 } 117 118 if (!Arg) 119 { 120 return_ACPI_STATUS (AE_AML_NO_OPERAND); 121 } 122 123 if (WalkState->DeferredNode) 124 { 125 Node = WalkState->DeferredNode; 126 Status = AE_OK; 127 } 128 else 129 { 130 /* Execute flag should always be set when this function is entered */ 131 132 if (!(WalkState->ParseFlags & ACPI_PARSE_EXECUTE)) 133 { 134 return_ACPI_STATUS (AE_AML_INTERNAL); 135 } 136 137 /* Creating new namespace node, should not already exist */ 138 139 Flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | 140 ACPI_NS_ERROR_IF_FOUND; 141 142 /* 143 * Mark node temporary if we are executing a normal control 144 * method. (Don't mark if this is a module-level code method) 145 */ 146 if (WalkState->MethodNode && 147 !(WalkState->ParseFlags & ACPI_PARSE_MODULE_LEVEL)) 148 { 149 Flags |= ACPI_NS_TEMPORARY; 150 } 151 152 /* Enter the NameString into the namespace */ 153 154 Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.String, 155 ACPI_TYPE_ANY, ACPI_IMODE_LOAD_PASS1, 156 Flags, WalkState, &Node); 157 if (ACPI_FAILURE (Status)) 158 { 159 ACPI_ERROR_NAMESPACE (Arg->Common.Value.String, Status); 160 return_ACPI_STATUS (Status); 161 } 162 } 163 164 /* 165 * We could put the returned object (Node) on the object stack for later, 166 * but for now, we will put it in the "op" object that the parser uses, 167 * so we can get it again at the end of this scope. 168 */ 169 Op->Common.Node = Node; 170 171 /* 172 * If there is no object attached to the node, this node was just created 173 * and we need to create the field object. Otherwise, this was a lookup 174 * of an existing node and we don't want to create the field object again. 175 */ 176 ObjDesc = AcpiNsGetAttachedObject (Node); 177 if (ObjDesc) 178 { 179 return_ACPI_STATUS (AE_OK); 180 } 181 182 /* 183 * The Field definition is not fully parsed at this time. 184 * (We must save the address of the AML for the buffer and index operands) 185 */ 186 187 /* Create the buffer field object */ 188 189 ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_BUFFER_FIELD); 190 if (!ObjDesc) 191 { 192 Status = AE_NO_MEMORY; 193 goto Cleanup; 194 } 195 196 /* 197 * Remember location in AML stream of the field unit opcode and operands -- 198 * since the buffer and index operands must be evaluated. 199 */ 200 SecondDesc = ObjDesc->Common.NextObject; 201 SecondDesc->Extra.AmlStart = Op->Named.Data; 202 SecondDesc->Extra.AmlLength = Op->Named.Length; 203 ObjDesc->BufferField.Node = Node; 204 205 /* Attach constructed field descriptors to parent node */ 206 207 Status = AcpiNsAttachObject (Node, ObjDesc, ACPI_TYPE_BUFFER_FIELD); 208 if (ACPI_FAILURE (Status)) 209 { 210 goto Cleanup; 211 } 212 213 214 Cleanup: 215 216 /* Remove local reference to the object */ 217 218 AcpiUtRemoveReference (ObjDesc); 219 return_ACPI_STATUS (Status); 220 } 221 222 223 /******************************************************************************* 224 * 225 * FUNCTION: AcpiDsGetFieldNames 226 * 227 * PARAMETERS: Info - CreateField info structure 228 * ` WalkState - Current method state 229 * Arg - First parser arg for the field name list 230 * 231 * RETURN: Status 232 * 233 * DESCRIPTION: Process all named fields in a field declaration. Names are 234 * entered into the namespace. 235 * 236 ******************************************************************************/ 237 238 static ACPI_STATUS 239 AcpiDsGetFieldNames ( 240 ACPI_CREATE_FIELD_INFO *Info, 241 ACPI_WALK_STATE *WalkState, 242 ACPI_PARSE_OBJECT *Arg) 243 { 244 ACPI_STATUS Status; 245 UINT64 Position; 246 247 248 ACPI_FUNCTION_TRACE_PTR (DsGetFieldNames, Info); 249 250 251 /* First field starts at bit zero */ 252 253 Info->FieldBitPosition = 0; 254 255 /* Process all elements in the field list (of parse nodes) */ 256 257 while (Arg) 258 { 259 /* 260 * Three types of field elements are handled: 261 * 1) Offset - specifies a bit offset 262 * 2) AccessAs - changes the access mode 263 * 3) Name - Enters a new named field into the namespace 264 */ 265 switch (Arg->Common.AmlOpcode) 266 { 267 case AML_INT_RESERVEDFIELD_OP: 268 269 Position = (UINT64) Info->FieldBitPosition 270 + (UINT64) Arg->Common.Value.Size; 271 272 if (Position > ACPI_UINT32_MAX) 273 { 274 ACPI_ERROR ((AE_INFO, 275 "Bit offset within field too large (> 0xFFFFFFFF)")); 276 return_ACPI_STATUS (AE_SUPPORT); 277 } 278 279 Info->FieldBitPosition = (UINT32) Position; 280 break; 281 282 283 case AML_INT_ACCESSFIELD_OP: 284 285 /* 286 * Get a new AccessType and AccessAttribute -- to be used for all 287 * field units that follow, until field end or another AccessAs 288 * keyword. 289 * 290 * In FieldFlags, preserve the flag bits other than the 291 * ACCESS_TYPE bits 292 */ 293 Info->FieldFlags = (UINT8) 294 ((Info->FieldFlags & ~(AML_FIELD_ACCESS_TYPE_MASK)) | 295 ((UINT8) ((UINT32) Arg->Common.Value.Integer >> 8))); 296 297 Info->Attribute = (UINT8) (Arg->Common.Value.Integer); 298 break; 299 300 301 case AML_INT_NAMEDFIELD_OP: 302 303 /* Lookup the name, it should already exist */ 304 305 Status = AcpiNsLookup (WalkState->ScopeInfo, 306 (char *) &Arg->Named.Name, Info->FieldType, 307 ACPI_IMODE_EXECUTE, ACPI_NS_DONT_OPEN_SCOPE, 308 WalkState, &Info->FieldNode); 309 if (ACPI_FAILURE (Status)) 310 { 311 ACPI_ERROR_NAMESPACE ((char *) &Arg->Named.Name, Status); 312 return_ACPI_STATUS (Status); 313 } 314 else 315 { 316 Arg->Common.Node = Info->FieldNode; 317 Info->FieldBitLength = Arg->Common.Value.Size; 318 319 /* 320 * If there is no object attached to the node, this node was 321 * just created and we need to create the field object. 322 * Otherwise, this was a lookup of an existing node and we 323 * don't want to create the field object again. 324 */ 325 if (!AcpiNsGetAttachedObject (Info->FieldNode)) 326 { 327 Status = AcpiExPrepFieldValue (Info); 328 if (ACPI_FAILURE (Status)) 329 { 330 return_ACPI_STATUS (Status); 331 } 332 } 333 } 334 335 /* Keep track of bit position for the next field */ 336 337 Position = (UINT64) Info->FieldBitPosition 338 + (UINT64) Arg->Common.Value.Size; 339 340 if (Position > ACPI_UINT32_MAX) 341 { 342 ACPI_ERROR ((AE_INFO, 343 "Field [%4.4s] bit offset too large (> 0xFFFFFFFF)", 344 ACPI_CAST_PTR (char, &Info->FieldNode->Name))); 345 return_ACPI_STATUS (AE_SUPPORT); 346 } 347 348 Info->FieldBitPosition += Info->FieldBitLength; 349 break; 350 351 352 default: 353 354 ACPI_ERROR ((AE_INFO, 355 "Invalid opcode in field list: 0x%X", Arg->Common.AmlOpcode)); 356 return_ACPI_STATUS (AE_AML_BAD_OPCODE); 357 } 358 359 Arg = Arg->Common.Next; 360 } 361 362 return_ACPI_STATUS (AE_OK); 363 } 364 365 366 /******************************************************************************* 367 * 368 * FUNCTION: AcpiDsCreateField 369 * 370 * PARAMETERS: Op - Op containing the Field definition and args 371 * RegionNode - Object for the containing Operation Region 372 * ` WalkState - Current method state 373 * 374 * RETURN: Status 375 * 376 * DESCRIPTION: Create a new field in the specified operation region 377 * 378 ******************************************************************************/ 379 380 ACPI_STATUS 381 AcpiDsCreateField ( 382 ACPI_PARSE_OBJECT *Op, 383 ACPI_NAMESPACE_NODE *RegionNode, 384 ACPI_WALK_STATE *WalkState) 385 { 386 ACPI_STATUS Status; 387 ACPI_PARSE_OBJECT *Arg; 388 ACPI_CREATE_FIELD_INFO Info; 389 390 391 ACPI_FUNCTION_TRACE_PTR (DsCreateField, Op); 392 393 394 /* First arg is the name of the parent OpRegion (must already exist) */ 395 396 Arg = Op->Common.Value.Arg; 397 if (!RegionNode) 398 { 399 Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.Name, 400 ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE, 401 ACPI_NS_SEARCH_PARENT, WalkState, &RegionNode); 402 if (ACPI_FAILURE (Status)) 403 { 404 ACPI_ERROR_NAMESPACE (Arg->Common.Value.Name, Status); 405 return_ACPI_STATUS (Status); 406 } 407 } 408 409 /* Second arg is the field flags */ 410 411 Arg = Arg->Common.Next; 412 Info.FieldFlags = (UINT8) Arg->Common.Value.Integer; 413 Info.Attribute = 0; 414 415 /* Each remaining arg is a Named Field */ 416 417 Info.FieldType = ACPI_TYPE_LOCAL_REGION_FIELD; 418 Info.RegionNode = RegionNode; 419 420 Status = AcpiDsGetFieldNames (&Info, WalkState, Arg->Common.Next); 421 422 return_ACPI_STATUS (Status); 423 } 424 425 426 /******************************************************************************* 427 * 428 * FUNCTION: AcpiDsInitFieldObjects 429 * 430 * PARAMETERS: Op - Op containing the Field definition and args 431 * ` WalkState - Current method state 432 * 433 * RETURN: Status 434 * 435 * DESCRIPTION: For each "Field Unit" name in the argument list that is 436 * part of the field declaration, enter the name into the 437 * namespace. 438 * 439 ******************************************************************************/ 440 441 ACPI_STATUS 442 AcpiDsInitFieldObjects ( 443 ACPI_PARSE_OBJECT *Op, 444 ACPI_WALK_STATE *WalkState) 445 { 446 ACPI_STATUS Status; 447 ACPI_PARSE_OBJECT *Arg = NULL; 448 ACPI_NAMESPACE_NODE *Node; 449 UINT8 Type = 0; 450 UINT32 Flags; 451 452 453 ACPI_FUNCTION_TRACE_PTR (DsInitFieldObjects, Op); 454 455 456 /* Execute flag should always be set when this function is entered */ 457 458 if (!(WalkState->ParseFlags & ACPI_PARSE_EXECUTE)) 459 { 460 if (WalkState->ParseFlags & ACPI_PARSE_DEFERRED_OP) 461 { 462 /* BankField Op is deferred, just return OK */ 463 464 return_ACPI_STATUS (AE_OK); 465 } 466 467 return_ACPI_STATUS (AE_AML_INTERNAL); 468 } 469 470 /* 471 * Get the FieldList argument for this opcode. This is the start of the 472 * list of field elements. 473 */ 474 switch (WalkState->Opcode) 475 { 476 case AML_FIELD_OP: 477 Arg = AcpiPsGetArg (Op, 2); 478 Type = ACPI_TYPE_LOCAL_REGION_FIELD; 479 break; 480 481 case AML_BANK_FIELD_OP: 482 Arg = AcpiPsGetArg (Op, 4); 483 Type = ACPI_TYPE_LOCAL_BANK_FIELD; 484 break; 485 486 case AML_INDEX_FIELD_OP: 487 Arg = AcpiPsGetArg (Op, 3); 488 Type = ACPI_TYPE_LOCAL_INDEX_FIELD; 489 break; 490 491 default: 492 return_ACPI_STATUS (AE_BAD_PARAMETER); 493 } 494 495 /* Creating new namespace node(s), should not already exist */ 496 497 Flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | 498 ACPI_NS_ERROR_IF_FOUND; 499 500 /* 501 * Mark node(s) temporary if we are executing a normal control 502 * method. (Don't mark if this is a module-level code method) 503 */ 504 if (WalkState->MethodNode && 505 !(WalkState->ParseFlags & ACPI_PARSE_MODULE_LEVEL)) 506 { 507 Flags |= ACPI_NS_TEMPORARY; 508 } 509 510 /* 511 * Walk the list of entries in the FieldList 512 * Note: FieldList can be of zero length. In this case, Arg will be NULL. 513 */ 514 while (Arg) 515 { 516 /* 517 * Ignore OFFSET and ACCESSAS terms here; we are only interested in the 518 * field names in order to enter them into the namespace. 519 */ 520 if (Arg->Common.AmlOpcode == AML_INT_NAMEDFIELD_OP) 521 { 522 Status = AcpiNsLookup (WalkState->ScopeInfo, 523 (char *) &Arg->Named.Name, Type, ACPI_IMODE_LOAD_PASS1, 524 Flags, WalkState, &Node); 525 if (ACPI_FAILURE (Status)) 526 { 527 ACPI_ERROR_NAMESPACE ((char *) &Arg->Named.Name, Status); 528 if (Status != AE_ALREADY_EXISTS) 529 { 530 return_ACPI_STATUS (Status); 531 } 532 533 /* Name already exists, just ignore this error */ 534 535 Status = AE_OK; 536 } 537 538 Arg->Common.Node = Node; 539 } 540 541 /* Get the next field element in the list */ 542 543 Arg = Arg->Common.Next; 544 } 545 546 return_ACPI_STATUS (AE_OK); 547 } 548 549 550 /******************************************************************************* 551 * 552 * FUNCTION: AcpiDsCreateBankField 553 * 554 * PARAMETERS: Op - Op containing the Field definition and args 555 * RegionNode - Object for the containing Operation Region 556 * WalkState - Current method state 557 * 558 * RETURN: Status 559 * 560 * DESCRIPTION: Create a new bank field in the specified operation region 561 * 562 ******************************************************************************/ 563 564 ACPI_STATUS 565 AcpiDsCreateBankField ( 566 ACPI_PARSE_OBJECT *Op, 567 ACPI_NAMESPACE_NODE *RegionNode, 568 ACPI_WALK_STATE *WalkState) 569 { 570 ACPI_STATUS Status; 571 ACPI_PARSE_OBJECT *Arg; 572 ACPI_CREATE_FIELD_INFO Info; 573 574 575 ACPI_FUNCTION_TRACE_PTR (DsCreateBankField, Op); 576 577 578 /* First arg is the name of the parent OpRegion (must already exist) */ 579 580 Arg = Op->Common.Value.Arg; 581 if (!RegionNode) 582 { 583 Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.Name, 584 ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE, 585 ACPI_NS_SEARCH_PARENT, WalkState, &RegionNode); 586 if (ACPI_FAILURE (Status)) 587 { 588 ACPI_ERROR_NAMESPACE (Arg->Common.Value.Name, Status); 589 return_ACPI_STATUS (Status); 590 } 591 } 592 593 /* Second arg is the Bank Register (Field) (must already exist) */ 594 595 Arg = Arg->Common.Next; 596 Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.String, 597 ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, 598 ACPI_NS_SEARCH_PARENT, WalkState, &Info.RegisterNode); 599 if (ACPI_FAILURE (Status)) 600 { 601 ACPI_ERROR_NAMESPACE (Arg->Common.Value.String, Status); 602 return_ACPI_STATUS (Status); 603 } 604 605 /* 606 * Third arg is the BankValue 607 * This arg is a TermArg, not a constant 608 * It will be evaluated later, by AcpiDsEvalBankFieldOperands 609 */ 610 Arg = Arg->Common.Next; 611 612 /* Fourth arg is the field flags */ 613 614 Arg = Arg->Common.Next; 615 Info.FieldFlags = (UINT8) Arg->Common.Value.Integer; 616 617 /* Each remaining arg is a Named Field */ 618 619 Info.FieldType = ACPI_TYPE_LOCAL_BANK_FIELD; 620 Info.RegionNode = RegionNode; 621 622 /* 623 * Use Info.DataRegisterNode to store BankField Op 624 * It's safe because DataRegisterNode will never be used when create bank field 625 * We store AmlStart and AmlLength in the BankField Op for late evaluation 626 * Used in AcpiExPrepFieldValue(Info) 627 * 628 * TBD: Or, should we add a field in ACPI_CREATE_FIELD_INFO, like "void *ParentOp"? 629 */ 630 Info.DataRegisterNode = (ACPI_NAMESPACE_NODE*) Op; 631 632 Status = AcpiDsGetFieldNames (&Info, WalkState, Arg->Common.Next); 633 return_ACPI_STATUS (Status); 634 } 635 636 637 /******************************************************************************* 638 * 639 * FUNCTION: AcpiDsCreateIndexField 640 * 641 * PARAMETERS: Op - Op containing the Field definition and args 642 * RegionNode - Object for the containing Operation Region 643 * ` WalkState - Current method state 644 * 645 * RETURN: Status 646 * 647 * DESCRIPTION: Create a new index field in the specified operation region 648 * 649 ******************************************************************************/ 650 651 ACPI_STATUS 652 AcpiDsCreateIndexField ( 653 ACPI_PARSE_OBJECT *Op, 654 ACPI_NAMESPACE_NODE *RegionNode, 655 ACPI_WALK_STATE *WalkState) 656 { 657 ACPI_STATUS Status; 658 ACPI_PARSE_OBJECT *Arg; 659 ACPI_CREATE_FIELD_INFO Info; 660 661 662 ACPI_FUNCTION_TRACE_PTR (DsCreateIndexField, Op); 663 664 665 /* First arg is the name of the Index register (must already exist) */ 666 667 Arg = Op->Common.Value.Arg; 668 Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.String, 669 ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, 670 ACPI_NS_SEARCH_PARENT, WalkState, &Info.RegisterNode); 671 if (ACPI_FAILURE (Status)) 672 { 673 ACPI_ERROR_NAMESPACE (Arg->Common.Value.String, Status); 674 return_ACPI_STATUS (Status); 675 } 676 677 /* Second arg is the data register (must already exist) */ 678 679 Arg = Arg->Common.Next; 680 Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.String, 681 ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, 682 ACPI_NS_SEARCH_PARENT, WalkState, &Info.DataRegisterNode); 683 if (ACPI_FAILURE (Status)) 684 { 685 ACPI_ERROR_NAMESPACE (Arg->Common.Value.String, Status); 686 return_ACPI_STATUS (Status); 687 } 688 689 /* Next arg is the field flags */ 690 691 Arg = Arg->Common.Next; 692 Info.FieldFlags = (UINT8) Arg->Common.Value.Integer; 693 694 /* Each remaining arg is a Named Field */ 695 696 Info.FieldType = ACPI_TYPE_LOCAL_INDEX_FIELD; 697 Info.RegionNode = RegionNode; 698 699 Status = AcpiDsGetFieldNames (&Info, WalkState, Arg->Common.Next); 700 701 return_ACPI_STATUS (Status); 702 } 703 704