1 CW(1ONBLD) illumos Build Tools CW(1ONBLD)
2
3
4
5 NAME
6 cw - invoke one or more compilers with argument translation
7
8 SYNOPSIS
9 cw {-_cc|-_gcc|-_CC|-_g++} [options] [compiler args...]
10
11 DESCRIPTION
12 cw is a facility for invoking one or more compilers, providing
13 translation from Sun Studio arguments as appropriate. This allows the
14 use of arbitrary compilers without the need to alter large numbers of
15 makefiles. A mode called shadow compilation, the default, invokes two
16 different compilers so that warnings and errors may be obtained from
17 both. See SHADOW COMPILATION for details. This version of cw supports
18 Sun Studio 10 and 11 and gcc 3.4.3 as shipped in Solaris.
19
20 ARGUMENTS
21 Exactly one of the following arguments is required, and must appear
22 immediately following cw in the argument list:
23
24 -_cc
25 Select Sun Studio C (cc) as the primary compiler.
26
27 -_gcc
28 Select GNU C (gcc) as the primary compiler.
29
30 -_CC
31 Select Sun Studio C++ (CC) as the primary compiler.
32
33 -_g++
34 Select GNU C++ (g++) as the primary compiler.
35
36 OPTIONS
37 The following options are supported:
38
39 -_compiler
40 Do not invoke any compiler; instead, write to standard output the
41 full path to the primary compiler that would be invoked. If this
42 option is given, it must appear immediately following the compiler
43 selection argument, and all other options will be disregarded.
44
45 -_versions
46 Print the cw version, followed in turn by the path to and versions
47 of each compiler which would be invoked. If this option is given,
48 it must appear immediately following the compiler selection
49 argument, and all other options will be disregarded.
50
51 -_noecho
52 Normally, cw writes to standard error the actual compiler commands
53 invoked, each prefixed with '+'. This option suppresses these
54 messages.
55
56 -_cc=,-_gcc=,-_CC=,-g++=
57 Pass compiler-dependent options. See ARGUMENT TRANSLATION.
58
59 SHADOW COMPILATION
60 Unless otherwise directed by environment variables (see ENVIRONMENT),
61 cw will invoke both the compiler specified by its first argument
62 (primary) and a designated alternate compiler (shadow). The primary
63 compiler will be invoked with the arguments given to cw, translated as
64 described in ARGUMENT TRANSLATION. The secondary compiler will be
65 invoked in parallel with the primary (but see ENVIRONMENT); its
66 arguments will likewise be translated. However, the shadow compiler's
67 arguments will also be modified as follows:
68
69 1. If none of -c, -E, -P, or -S appears in the argument list (that is,
70 linking is attempted), the shadow compiler will not be invoked.
71 This is because the objects built with that compiler which would be
72 linked have been previously discarded.
73
74 2. If an option of the form -ofilename was provided, it will be
75 replaced by two options of the form -o tempfile.
76
77 3. If the option -o was provided, its following argument will be
78 replaced by tempfile.
79
80 4. If neither of the above options was provided, two options of the
81 form -o tempfile will be added to the end of the argument list used
82 to invoke the shadow compiler.
83
84 In all three cases, tempfile is the name of a temporary file which will
85 be removed by cw before it terminates.
86
87 When shadow compilation is in effect, cw writes to standard error each
88 compiler's standard error output following its argument list. Messages
89 from the two compilers will not be interleaved. If cw is used to
90 invoke the preprocessor and no output location is specified, cw will
91 write to standard output the primary compiler's standard output, and
92 the secondary compiler's standard output will be discarded.
93
94 Because the Studio compilers write intermediate objects to fixed
95 filenames in the current directory when instructed to compile and link
96 multiple source files via a single command line, it would be unsafe to
97 invoke more than one compiler in this fashion. Therefore cw does not
98 accept multiple source files unless the preprocessor is to be invoked.
99 An attempt to invoke cw in this manner will result in an error.
100
101 ARGUMENT TRANSLATION
102 The arguments provided to cw will be passed through to each compiler
103 invoked, altered as follows:
104
105 1. Options intended for cw itself are removed.
106
107 2. The shadow compiler's arguments are modified as described in SHADOW
108 COMPILATION so that its output is discarded.
109
110 3. If the compiler to be invoked is a GNU C or C++ compiler, a set of
111 default flags is added to the beginning of the argument list, and
112 the remaining arguments are translated to their closest appropriate
113 semantic equivalents and passed in the same order as their
114 counterparts given to cw. Arguments which begin with -_gcc= or
115 -_g++= will be passed in place with the leading portion removed.
116 Arguments which begin with -_cc= or -_CC= will be discarded. See
117 the comments at the head of usr/src/tools/cw/cw.c for a detailed
118 list of translations.
119
120 4. If the compiler to be invoked is a Studio C or C++ compiler, the
121 remaining arguments are passed unmodified and in the same order as
122 given to cw. Arguments which begin with -_cc= or -_CC= will be
123 passed in place with the leading portion removed. Arguments which
124 begin with -_gcc= or -_g++= will be discarded.
125
126 ENVIRONMENT
127 CW_NO_SHADOW
128 If this variable is set in the environment, invoke only the primary
129 compiler.
130
131 CW_SHADOW_SERIAL
132 If this variable is set in the environment, invoke the primary
133 compiler, wait for it to complete, then invoke the shadow compiler.
134 Normally the two compilers are invoked in parallel. If
135 CW_NO_SHADOW is set, this has no effect.
136
137 CW_NO_EXEC
138 If this variable is set in the environment, write the usual output
139 to standard error but do not actually invoke any compiler. This is
140 useful for debugging the translation engine.
141
142 CW_CC, CW_CPLUSPLUS
143 If these variables are set in the environment, they specify the
144 full pathname for the Studio C and C++ compilers, respectively.
145
146 CW_CC_DIR, CW_CPLUSPLUS_DIR, SPRO_VROOT, SPRO_ROOT, BUILD_TOOLS
147 If CW_CC or CW_CPLUSPLUS are not set, these variables define the
148 search path for Studio compilers as follows: If CW_CC_DIR is set,
149 the Studio C compiler in $CW_CC_DIR will be used. Likewise, if
150 CW_CPLUSPLUS_DIR is set, the Studio C++ compiler in
151 $CW_CPLUSPLUS_DIR will be used. Otherwise, if SPRO_VROOT is set,
152 the Studio C and C++ compilers in $SPRO_VROOT/bin will be used.
153 Otherwise, if SPRO_ROOT is set, the Studio C and C++ compilers in
154 $SPRO_ROOT/SS12/bin will be used. Otherwise, if BUILD_TOOLS is
155 set, the Studio C and C++ compilers in
156 $BUILD_TOOLS/SUNWspro/SS12/bin will be used. Otherwise, the Studio
157 compilers in a predefined default location will be used.
158
159 CW_GCC, CW_GPLUSPLUS
160 If these variables are set in the environment, they specify the
161 full pathname for the GNU C and C++ compilers, respectively.
162
163 CW_GCC_DIR, CW_GPLUSPLUS_DIR, GNU_ROOT
164 If CW_GCC or CW_GPLUSPLUS are not set, these variables alter the
165 search path for GNU compilers in a manner similar to that described
166 above for the Studio compilers. Specifically: If CW_GCC_DIR is
167 set, the GNU C compiler in $CW_GCC_DIR will be used. Likewise, if
168 CW_GPLUSPLUS_DIR is set, the GNU C++ compiler in $CW_GPLUSPLUS_DIR
169 will be used. Otherwise, if GNU_ROOT is set, the GNU C and C++
170 compilers in $GCC_ROOT/bin will be used. Otherwise, the GNU
171 compilers in a predefined default location will be used.
172
173 EXIT STATUS
174 The following exit status values are returned:
175
176 0 The primary compiler, and shadow compiler if invoked, both
177 completed successfully.
178
179 >0 A usage error occurred, or one or more compilers returned a nonzero
180 exit status.
181
182 BUGS
183 The translations provided for gcc are not always exact and in some
184 cases reflect local ON policy rather than actual equivalence.
185
186 Additional compiler types should be supported.
187
188 The translation engine is hacky.
189
190 SEE ALSO
191 cc(1), CC(1), gcc(1)
192
193
194
195 March 22, 2010 CW(1ONBLD)
|
1 CW(1ONBLD) illumos Build Tools CW(1ONBLD)
2
3 NAME
4 cw - invoke one or more compilers with argument translation
5
6 SYNOPSIS
7 cw [-C] [--versions] [--noecho] --primary compiler
8 [--shadow compiler ...] -- compiler args ...
9
10 DESCRIPTION
11 cw is a facility for invoking one or more compilers, providing
12 translation from Sun style arguments as appropriate. This allows the use
13 of arbitrary compilers without the need to alter large numbers of
14 makefiles. A mode called shadow compilation invokes multiple compilers
15 so that warnings and errors may be obtained from both. See SHADOW
16 COMPILATION for details. This version of cw supports compilers with both
17 Sun Studio 12 and GCC-style command lines.
18
19 ARGUMENTS
20 Both the --primary and --shadow parameters take a compiler specification.
21 This is a comma-separated list of the form name,executable,style Where
22 name is a name for the compiler, executable is the full path to the
23 compiler executable, and style is the style of command-line options the
24 compiler expects, either sun or gnu.
25
26 --primary compiler
27 Specify the compiler to be used primarily (that which is used for
28 link-editing and pre-processing, and whos objects we deliver).
29
30 --shadow compiler
31 Specify a shadow compiler, which builds sources for the sake of
32 checking code quality and compatibility, but has its output
33 discarded.
34
35 --noecho
36 Do not echo the actual command line of any compilers invoked.
37
38 --versions
39 Request from each configured primary and shadow compiler its
40 version information.
41
42 -C The sources being compiled are C++. This is necessary as it
43 affects the translation of compiler arguments.
44
45 -- Arguments intended for the compilers themselves must be separated
46 from those of cw by a --.
47
48 -_name=
49
50 -_style=
51 Parameters intended for the compiler be guarded with options of
52 the form -_name= and -_style= Where name and style are those
53 passed to --primary and --shadow this allows certain flags to be
54 passed only to certain classes of compiler.
55
56 For historical reasons, the -_style= option is also translated
57 such that a style of sun may use the flag -_cc= and a style of
58 gnu may use the flag -_gcc=, and when the -C option is given and
59 C++ is in use the style of sun may use the flag -_CC= and the
60 style of gnu may use the flag -_g++=.
61
62 SHADOW COMPILATION
63 If --shadow compilers are specified cw will invoke shadow compiler, with
64 the outputs modified (as well as any translation for compiler style) as
65 follows:
66
67 1. If neither of -c, -S appears in the argument list (that is, linking
68 is attempted or only the pre-processor is invoked), the shadow
69 compilers will not be invoked.
70
71 2. If the -o filename option was provided, with or without a separating
72 space, it will be replaced with -o tempfile
73
74 3. If the option -o was not provided, -o tempfile will be added to the
75 end of the argument list used to invoke the shadow compilers.
76 When shadow compilation is in effect, cw writes to standard error each
77 compiler's standard error output following its argument list. Messages
78 from the compilers will not be interleaved. If cw is used to invoke the
79 preprocessor and no output location is specified, cw will write to
80 standard output the primary compiler's standard output.
81
82 Because the Sun compilers write intermediate objects to fixed filenames
83 in the current directory when instructed to compile and link multiple
84 source files via a single command line, it would be unsafe to invoke more
85 than one compiler in this fashion. Therefore cw does not accept multiple
86 source files unless the preprocessor is to be invoked. An attempt to
87 invoke cw in this manner will result in an error.
88
89 ARGUMENT TRANSLATION
90 If the compiler to be invoked is a GNU-style C or C++ compiler, a set of
91 default flags is added to the beginning of the argument list, and the
92 remaining arguments are translated to their closest appropriate semantic
93 equivalents and passed in the same order as their counterparts given to
94 cw. See the comments at the head of usr/src/tools/cw/cw.c for a detailed
95 list of translations.
96
97 ENVIRONMENT
98 CW_SHADOW_SERIAL
99 If this variable is set in the environment, invoke the primary
100 compiler, wait for it to complete, then invoke the shadow
101 compilers. Normally the primary and shadow compilers are invoked
102 in parallel.
103
104 CW_NO_EXEC
105 If this variable is set in the environment, write the usual
106 output to standard error but do not actually invoke any compiler.
107 This is useful for debugging the translation engine.
108
109 EXIT STATUS
110 The following exit status values are returned:
111
112 0 The primary compiler, and shadow compilers if invoked, both
113 completed successfully.
114
115 >0 A usage error occurred, or one or more compilers returned a
116 nonzero exit status.
117
118 SEE ALSO
119 cc(1), CC(1), gcc(1)
120
121 BUGS
122 The translations provided for gcc are not always exact and in some cases
123 reflect local policy rather than actual equivalence.
124
125 Additional compiler types should be supported.
126
127 The translation engine is hacky.
128
129 illumos February 10, 2018 illumos
|