ZONECFG(1M) Maintenance Commands ZONECFG(1M)

NAME

zonecfg - set up zone configuration

SYNOPSIS


zonecfg -z zonename
 

zonecfg -z zonename subcommand
 

zonecfg -z zonename -f command_file
 

zonecfg help
 

DESCRIPTION

The zonecfg utility creates and modifies the configuration of a zone. Zone configuration consists of a number of resources and properties.
 
To simplify the user interface, zonecfg uses the concept of a scope. The default scope is global.
 
The following synopsis of the zonecfg command is for interactive usage:
 


zonecfg -z zonename subcommand

 
 
 
Parameters changed through zonecfg do not affect a running zone. The zone must be rebooted for the changes to take effect.
 
In addition to creating and modifying a zone, the zonecfg utility can also be used to persistently specify the resource management settings for the global zone.
 
In the following text, "rctl" is used as an abbreviation for "resource control". See resource_controls(5).
 
Every zone is configured with an associated brand. The brand determines the user-level environment used within the zone, as well as various behaviors for the zone when it is installed, boots, or is shutdown. Once a zone has been installed the brand cannot be changed. The default brand is determined by the installed distribution in the global zone. Some brands do not support all of the zonecfg properties and resources. See the brand-specific man page for more details on each brand. For an overview of brands, see the brands(5) man page.

Resources

The following resource types are supported:
 
attr
 
Generic attribute.
 
 
capped-cpu
 
Limits for CPU usage.
 
 
capped-memory
 
Limits for physical, swap, and locked memory.
 
 
dataset
 
ZFS dataset.
 
 
dedicated-cpu
 
Subset of the system's processors dedicated to this zone while it is running.
 
 
device
 
Device.
 
 
fs
 
file-system
 
 
net
 
Network interface.
 
 
rctl
 
Resource control.
 
 
security-flags
 
Process security flag settings.
 

Properties

Each resource type has one or more properties. There are also some global properties, that is, properties of the configuration as a whole, rather than of some particular resource.
 
The following properties are supported:
 
(global)
 
zonename
 
 
(global)
 
zonepath
 
 
(global)
 
autoboot
 
 
(global)
 
bootargs
 
 
(global)
 
pool
 
 
(global)
 
limitpriv
 
 
(global)
 
brand
 
 
(global)
 
cpu-shares
 
 
(global)
 
hostid
 
 
(global)
 
max-lwps
 
 
(global)
 
max-msg-ids
 
 
(global)
 
max-sem-ids
 
 
(global)
 
max-shm-ids
 
 
(global)
 
max-shm-memory
 
 
(global)
 
scheduling-class
 
 
(global)
 
fs-allowed
 
 
fs
 
dir, special, raw, type, options
 
 
net
 
address, physical, defrouter
 
 
device
 
match
 
 
rctl
 
name, value
 
 
attr
 
name, type, value
 
 
dataset
 
name
 
 
dedicated-cpu
 
ncpus, importance
 
 
capped-memory
 
physical, swap, locked
 
 
capped-cpu
 
ncpus
 
 
security-flags
 
lower, default, upper.
 
 
As for the property values which are paired with these names, they are either simple, complex, or lists. The type allowed is property-specific. Simple values are strings, optionally enclosed within quotation marks. Complex values have the syntax:
 


(<name>=<value>,<name>=<value>,...)

 
 
 
where each <value> is simple, and the <name> strings are unique within a given property. Lists have the syntax:
 


[<value>,...]

 
 
 
where each <value> is either simple or complex. A list of a single value (either simple or complex) is equivalent to specifying that value without the list syntax. That is, "foo" is equivalent to "[foo]". A list can be empty (denoted by "[]").
 
In interpreting property values, zonecfg accepts regular expressions as specified in fnmatch(5). See EXAMPLES.
 
The property types are described as follows:
 
global: zonename
 
The name of the zone.
 
 
global: zonepath
 
Path to zone's file system.
 
 
global: autoboot
 
Boolean indicating that a zone should be booted automatically at system boot. Note that if the zones service is disabled, the zone will not autoboot, regardless of the setting of this property. You enable the zones service with a svcadm command, such as:
 


# svcadm enable svc:/system/zones:default

 
 
Replace enable with disable to disable the zones service. See svcadm(1M).
 
 
global: bootargs
 
Arguments (options) to be passed to the zone bootup, unless options are supplied to the " zoneadm boot" command, in which case those take precedence. The valid arguments are described in zoneadm(1M).
 
 
global: pool
 
Name of the resource pool that this zone must be bound to when booted. This property is incompatible with the dedicated-cpu resource.
 
 
global: limitpriv
 
The maximum set of privileges any process in this zone can obtain. The property should consist of a comma-separated privilege set specification as described in priv_str_to_set(3C). Privileges can be excluded from the resulting set by preceding their names with a dash (-) or an exclamation point (!). The special privilege string "zone" is not supported in this context. If the special string "default" occurs as the first token in the property, it expands into a safe set of privileges that preserve the resource and security isolation described in zones(5). A missing or empty property is equivalent to this same set of safe privileges.
 
The system administrator must take extreme care when configuring privileges for a zone. Some privileges cannot be excluded through this mechanism as they are required in order to boot a zone. In addition, there are certain privileges which cannot be given to a zone as doing so would allow processes inside a zone to unduly affect processes in other zones. zoneadm(1M) indicates when an invalid privilege has been added or removed from a zone's privilege set when an attempt is made to either "boot" or "ready" the zone.
 
See privileges(5) for a description of privileges. The command "ppriv -l" (see ppriv(1)) produces a list of all Solaris privileges. You can specify privileges as they are displayed by ppriv. In privileges(5), privileges are listed in the form PRIV_ privilege_name. For example, the privilege sys_time, as you would specify it in this property, is listed in privileges(5) as PRIV_SYS_TIME.
 
 
global: brand
 
The zone's brand type.
 
 
global: ip-type
 
A zone can either share the IP instance with the global zone, which is the default, or have its own exclusive instance of IP.
 
This property takes the values shared and exclusive.
 
 
global: hostid
 
A zone can emulate a 32-bit host identifier to ease system consolidation. A zone's hostid property is empty by default, meaning that the zone does not emulate a host identifier. Zone host identifiers must be hexadecimal values between 0 and FFFFFFFE. A 0x or 0X prefix is optional. Both uppercase and lowercase hexadecimal digits are acceptable.
 
 
fs: dir, special, raw, type, options
 
Values needed to determine how, where, and so forth to mount file systems. See mount(1M), mount(2), fsck(1M), and vfstab(4).
 
 
net: address, physical, defrouter
 
The network address and physical interface name of the network interface. The network address is one of:
o
a valid IPv4 address, optionally followed by "/" and a prefix length;
o
a valid IPv6 address, which must be followed by "/" and a prefix length;
o
a host name which resolves to an IPv4 address.
Note that host names that resolve to IPv6 addresses are not supported.
 
The physical interface name is the network interface name.
 
The default router is specified similarly to the network address except that it must not be followed by a / (slash) and a network prefix length.
 
A zone can be configured to be either exclusive-IP or shared-IP. For a shared-IP zone, you must set both the physical and address properties; setting the default router is optional. The interface specified in the physical property must be plumbed in the global zone prior to booting the non-global zone. However, if the interface is not used by the global zone, it should be configured down in the global zone, and the default router for the interface should be specified here.
 
For an exclusive-IP zone, the physical property must be set and the address and default router properties cannot be set.
 
 
device: match
 
Device name to match.
 
 
rctl: name, value
 
The name and priv/limit/action triple of a resource control. See prctl(1) and rctladm(1M). The preferred way to set rctl values is to use the global property name associated with a specific rctl.
 
 
attr: name, type, value
 
The name, type and value of a generic attribute. The type must be one of int, uint, boolean or string, and the value must be of that type. uint means unsigned , that is, a non-negative integer.
 
 
dataset: name
 
The name of a ZFS dataset to be accessed from within the zone. See zfs(1M).
 
 
global: cpu-shares
 
The number of Fair Share Scheduler (FSS) shares to allocate to this zone. This property is incompatible with the dedicated-cpu resource. This property is the preferred way to set the zone.cpu-shares rctl.
 
 
global: max-lwps
 
The maximum number of LWPs simultaneously available to this zone. This property is the preferred way to set the zone.max-lwps rctl.
 
 
global: max-msg-ids
 
The maximum number of message queue IDs allowed for this zone. This property is the preferred way to set the zone.max-msg-ids rctl.
 
 
global: max-sem-ids
 
The maximum number of semaphore IDs allowed for this zone. This property is the preferred way to set the zone.max-sem-ids rctl.
 
 
global: max-shm-ids
 
The maximum number of shared memory IDs allowed for this zone. This property is the preferred way to set the zone.max-shm-ids rctl.
 
 
global: max-shm-memory
 
The maximum amount of shared memory allowed for this zone. This property is the preferred way to set the zone.max-shm-memory rctl. A scale (K, M, G, T) can be applied to the value for this number (for example, 1M is one megabyte).
 
 
global: scheduling-class
 
Specifies the scheduling class used for processes running in a zone. When this property is not specified, the scheduling class is established as follows:
o
If the cpu-shares property or equivalent rctl is set, the scheduling class FSS is used.
o
If neither cpu-shares nor the equivalent rctl is set and the zone's pool property references a pool that has a default scheduling class, that class is used.
o
Under any other conditions, the system default scheduling class is used.
 
 
 
 
dedicated-cpu: ncpus, importance
 
The number of CPUs that should be assigned for this zone's exclusive use. The zone will create a pool and processor set when it boots. See pooladm(1M) and poolcfg(1M) for more information on resource pools. The ncpu property can specify a single value or a range (for example, 1-4) of processors. The importance property is optional; if set, it will specify the pset.importance value for use by poold(1M). If this resource is used, there must be enough free processors to allocate to this zone when it boots or the zone will not boot. The processors assigned to this zone will not be available for the use of the global zone or other zones. This resource is incompatible with both the pool and cpu-shares properties. Only a single instance of this resource can be added to the zone.
 
 
capped-memory: physical, swap, locked
 
The caps on the memory that can be used by this zone. A scale (K, M, G, T) can be applied to the value for each of these numbers (for example, 1M is one megabyte). Each of these properties is optional but at least one property must be set when adding this resource. Only a single instance of this resource can be added to the zone. The physical property sets the max-rss for this zone. This will be enforced by rcapd(1M) running in the global zone. The swap property is the preferred way to set the zone.max-swap rctl. The locked property is the preferred way to set the zone.max-locked-memory rctl.
 
 
capped-cpu: ncpus
 
Sets a limit on the amount of CPU time that can be used by a zone. The unit used translates to the percentage of a single CPU that can be used by all user threads in a zone, expressed as a fraction (for example, .75) or a mixed number (whole number and fraction, for example, 1.25). An ncpu value of 1 means 100% of a CPU, a value of 1.25 means 125%, .75 mean 75%, and so forth. When projects within a capped zone have their own caps, the minimum value takes precedence.
 
The capped-cpu property is an alias for zone.cpu-cap resource control and is related to the zone.cpu-cap resource control. See resource_controls(5).
 
 
security-flags: lower, default, upper
 
Set the process security flags associated with the zone. The lower and upper fields set the limits, the default field is set of flags all zone processes inherit.
 
 
global: fs-allowed
 
A comma-separated list of additional filesystems that may be mounted within the zone; for example "ufs,pcfs". By default, only hsfs(7fs) and network filesystems can be mounted. If the first entry in the list is "-" then that disables all of the default filesystems. If any filesystems are listed after "-" then only those filesystems can be mounted.
 
This property does not apply to filesystems mounted into the zone via "add fs" or "add dataset".
 
WARNING: allowing filesystem mounts other than the default may allow the zone administrator to compromise the system with a malicious filesystem image, and is not supported.
 
 
The following table summarizes resources, property-names, and types:
 


resource property-name type
(global) zonename simple
(global) zonepath simple
(global) autoboot simple
(global) bootargs simple
(global) pool simple
(global) limitpriv simple
(global) brand simple
(global) ip-type simple
(global) hostid simple
(global) cpu-shares simple
(global) max-lwps simple
(global) max-msg-ids simple
(global) max-sem-ids simple
(global) max-shm-ids simple
(global) max-shm-memory simple
(global) scheduling-class simple
fs dir simple
special simple
raw simple
type simple
options list of simple
net address simple
physical simple
device match simple
rctl name simple
value list of complex
attr name simple
type simple
value simple
dataset name simple
dedicated-cpu ncpus simple or range
importance simple

capped-memory physical simple with scale
swap simple with scale
locked simple with scale

capped-cpu ncpus simple
security-flags lower simple
default simple
upper simple

 
 
 
To further specify things, the breakdown of the complex property "value" of the "rctl" resource type, it consists of three name/value pairs, the names being "priv", "limit" and "action", each of which takes a simple value. The "name" property of an "attr" resource is syntactically restricted in a fashion similar but not identical to zone names: it must begin with an alphanumeric, and can contain alphanumerics plus the hyphen ( -), underscore (_), and dot ( .) characters. Attribute names beginning with "zone" are reserved for use by the system. Finally, the "autoboot" global property must have a value of "true" or "false".

Using Kernel Statistics to Monitor CPU Caps

Using the kernel statistics ( kstat(3KSTAT)) module caps, the system maintains information for all capped projects and zones. You can access this information by reading kernel statistics ( kstat(3KSTAT)), specifying caps as the kstat module name. The following command displays kernel statistics for all active CPU caps:
 


# kstat caps::'/cpucaps/'

 
 
 
A kstat(1M) command running in a zone displays only CPU caps relevant for that zone and for projects in that zone. See EXAMPLES.
 
The following are cap-related arguments for use with kstat(1M):
 
caps
 
The kstat module.
 
 
project_caps or zone_caps
 
kstat class, for use with the kstat -c option.
 
 
cpucaps_project_id or cpucaps_zone_id
 
kstat name, for use with the kstat -n option. id is the project or zone identifier.
 
 
The following fields are displayed in response to a kstat(1M) command requesting statistics for all CPU caps.
 
module
 
In this usage of kstat, this field will have the value caps.
 
 
name
 
As described above, cpucaps_project_id or cpucaps_zone_id
 
 
above_sec
 
Total time, in seconds, spent above the cap.
 
 
below_sec
 
Total time, in seconds, spent below the cap.
 
 
maxusage
 
Maximum observed CPU usage.
 
 
nwait
 
Number of threads on cap wait queue.
 
 
usage
 
Current aggregated CPU usage for all threads belonging to a capped project or zone, in terms of a percentage of a single CPU.
 
 
value
 
The cap value, in terms of a percentage of a single CPU.
 
 
zonename
 
Name of the zone for which statistics are displayed.
 
 
See EXAMPLES for sample output from a kstat command.

OPTIONS

The following options are supported:
 
-f command_file
 
Specify the name of zonecfg command file. command_file is a text file of zonecfg subcommands, one per line.
 
 
-z zonename
 
Specify the name of a zone. Zone names are case sensitive. Zone names must begin with an alphanumeric character and can contain alphanumeric characters, the underscore ( _) the hyphen (-), and the dot (.). The name global and all names beginning with SUNW are reserved and cannot be used.
 

SUBCOMMANDS

You can use the add and select subcommands to select a specific resource, at which point the scope changes to that resource. The end and cancel subcommands are used to complete the resource specification, at which time the scope is reverted back to global. Certain subcommands, such as add, remove and set, have different semantics in each scope.
 
zonecfg supports a semicolon-separated list of subcommands. For example:
 


# zonecfg -z myzone "add net; set physical=myvnic; end"

 
 
 
Subcommands which can result in destructive actions or loss of work have an -F option to force the action. If input is from a terminal device, the user is prompted when appropriate if such a command is given without the -F option otherwise, if such a command is given without the -F option, the action is disallowed, with a diagnostic message written to standard error.
 
The following subcommands are supported:
 
add resource-type (global scope)
 
add property-name property-value (resource scope)
 
In the global scope, begin the specification for a given resource type. The scope is changed to that resource type.
 
In the resource scope, add a property of the given name with the given value. The syntax for property values varies with different property types. In general, it is a simple value or a list of simple values enclosed in square brackets, separated by commas ( [foo,bar,baz]). See PROPERTIES.
 
 
cancel
 
End the resource specification and reset scope to global. Abandons any partially specified resources. cancel is only applicable in the resource scope.
 
 
clear property-name
 
Clear the value for the property.
 
 
commit
 
Commit the current configuration from memory to stable storage. The configuration must be committed to be used by zoneadm. Until the in-memory configuration is committed, you can remove changes with the revert subcommand. The commit operation is attempted automatically upon completion of a zonecfg session. Since a configuration must be correct to be committed, this operation automatically does a verify.
 
 
create [-F] [ -a path |-b | -t template]
 
Create an in-memory configuration for the specified zone. Use create to begin to configure a new zone. See commit for saving this to stable storage.
 
If you are overwriting an existing configuration, specify the -F option to force the action. Specify the -t template option to create a configuration identical to template, where template is the name of a configured zone.
 
Use the -a path option to facilitate configuring a detached zone on a new host. The path parameter is the zonepath location of a detached zone that has been moved on to this new host. Once the detached zone is configured, it should be installed using the " zoneadm attach" command (see zoneadm(1M)). All validation of the new zone happens during the attach process, not during zone configuration.
 
Use the -b option to create a blank configuration. Without arguments, create applies the Sun default settings.
 
 
delete [-F]
 
Delete the specified configuration from memory and stable storage. This action is instantaneous, no commit is necessary. A deleted configuration cannot be reverted.
 
Specify the -F option to force the action.
 
 
end
 
End the resource specification. This subcommand is only applicable in the resource scope. zonecfg checks to make sure the current resource is completely specified. If so, it is added to the in-memory configuration (see commit for saving this to stable storage) and the scope reverts to global. If the specification is incomplete, it issues an appropriate error message.
 
 
export [-f output-file]
 
Print configuration to standard output. Use the -f option to print the configuration to output-file. This option produces output in a form suitable for use in a command file.
 
 
help [usage] [subcommand] [syntax] [command-name]
 
Print general help or help about given topic.
 
 
info zonename | zonepath | autoboot | brand | pool | limitpriv
 
info [resource-type [property-name=property-value]*]
 
Display information about the current configuration. If resource-type is specified, displays only information about resources of the relevant type. If any property-name value pairs are specified, displays only information about resources meeting the given criteria. In the resource scope, any arguments are ignored, and info displays information about the resource which is currently being added or modified.
 
 
remove resource-type{property-name=property -value}(global scope)
 
In the global scope, removes the specified resource. The [] syntax means 0 or more of whatever is inside the square braces. If you want only to remove a single instance of the resource, you must specify enough property name-value pairs for the resource to be uniquely identified. If no property name-value pairs are specified, all instances will be removed. If there is more than one pair is specified, a confirmation is required, unless you use the -F option.
 
 
select resource-type {property-name=property-value}
 
Select the resource of the given type which matches the given property-name property-value pair criteria, for modification. This subcommand is applicable only in the global scope. The scope is changed to that resource type. The {} syntax means 1 or more of whatever is inside the curly braces. You must specify enough property -name property-value pairs for the resource to be uniquely identified.
 
 
set property-name=property-value
 
Set a given property name to the given value. Some properties (for example, zonename and zonepath) are global while others are resource-specific. This subcommand is applicable in both the global and resource scopes.
 
 
verify
 
Verify the current configuration for correctness:
o
All resources have all of their required properties specified.
o
A zonepath is specified.
 
 
revert [-F]
 
Revert the configuration back to the last committed state. The -F option can be used to force the action.
 
 
exit [-F]
 
Exit the zonecfg session. A commit is automatically attempted if needed. You can also use an EOF character to exit zonecfg. The -F option can be used to force the action.
 

EXAMPLES

Example 1 Creating the Environment for a New Zone
 
In the following example, zonecfg creates the environment for a new zone. /usr/local is loopback mounted from the global zone into /opt/local. /opt/sfw is loopback mounted from the global zone, three logical network interfaces are added, and a limit on the number of fair-share scheduler (FSS) CPU shares for a zone is set using the rctl resource type. The example also shows how to select a given resource for modification.
 
 


example# zonecfg -z myzone3
my-zone3: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:myzone3> create
zonecfg:myzone3> set zonepath=/export/home/my-zone3
zonecfg:myzone3> set autoboot=true
zonecfg:myzone3> add fs
zonecfg:myzone3:fs> set dir=/usr/local
zonecfg:myzone3:fs> set special=/opt/local
zonecfg:myzone3:fs> set type=lofs
zonecfg:myzone3:fs> add options [ro,nodevices]
zonecfg:myzone3:fs> end
zonecfg:myzone3> add fs
zonecfg:myzone3:fs> set dir=/mnt
zonecfg:myzone3:fs> set special=/dev/dsk/c0t0d0s7
zonecfg:myzone3:fs> set raw=/dev/rdsk/c0t0d0s7
zonecfg:myzone3:fs> set type=ufs
zonecfg:myzone3:fs> end
zonecfg:myzone3> add net
zonecfg:myzone3:net> set address=192.168.0.1/24
zonecfg:myzone3:net> set physical=eri0
zonecfg:myzone3:net> end
zonecfg:myzone3> add net
zonecfg:myzone3:net> set address=192.168.1.2/24
zonecfg:myzone3:net> set physical=eri0
zonecfg:myzone3:net> end
zonecfg:myzone3> add net
zonecfg:myzone3:net> set address=192.168.2.3/24
zonecfg:myzone3:net> set physical=eri0
zonecfg:myzone3:net> end
zonecfg:my-zone3> set cpu-shares=5
zonecfg:my-zone3> add capped-memory
zonecfg:my-zone3:capped-memory> set physical=50m
zonecfg:my-zone3:capped-memory> set swap=100m
zonecfg:my-zone3:capped-memory> end
zonecfg:myzone3> exit

 
 
Example 2 Creating a Non-Native Zone
 
The following example creates a new Linux zone:
 
 


example# zonecfg -z lxzone
lxzone: No such zone configured
Use 'create' to begin configuring a new zone
zonecfg:lxzone> create -t SUNWlx
zonecfg:lxzone> set zonepath=/export/zones/lxzone
zonecfg:lxzone> set autoboot=true
zonecfg:lxzone> exit

 
 
Example 3 Creating an Exclusive-IP Zone
 
The following example creates a zone that is granted exclusive access to bge1 and bge33000 and that is isolated at the IP layer from the other zones configured on the system.
 
 
The IP addresses and routing is configured inside the new zone using sysidtool(1M).
 
 


example# zonecfg -z excl
excl: No such zone configured
Use 'create' to begin configuring a new zone
zonecfg:excl> create
zonecfg:excl> set zonepath=/export/zones/excl
zonecfg:excl> set ip-type=exclusive
zonecfg:excl> add net
zonecfg:excl:net> set physical=bge1
zonecfg:excl:net> end
zonecfg:excl> add net
zonecfg:excl:net> set physical=bge33000
zonecfg:excl:net> end
zonecfg:excl> exit

 
 
Example 4 Associating a Zone with a Resource Pool
 
The following example shows how to associate an existing zone with an existing resource pool:
 
 


example# zonecfg -z myzone
zonecfg:myzone> set pool=mypool
zonecfg:myzone> exit

 
 
 
For more information about resource pools, see pooladm(1M) and poolcfg(1M).
 
Example 5 Changing the Name of a Zone
 
The following example shows how to change the name of an existing zone:
 
 


example# zonecfg -z myzone
zonecfg:myzone> set zonename=myzone2
zonecfg:myzone2> exit

 
 
Example 6 Changing the Privilege Set of a Zone
 
The following example shows how to change the set of privileges an existing zone's processes will be limited to the next time the zone is booted. In this particular case, the privilege set will be the standard safe set of privileges a zone normally has along with the privilege to change the system date and time:
 
 


example# zonecfg -z myzone
zonecfg:myzone> set limitpriv="default,sys_time"
zonecfg:myzone2> exit

 
 
Example 7 Setting the zone.cpu-shares Property for the Global Zone
 
The following command sets the zone.cpu-shares property for the global zone:
 
 


example# zonecfg -z global
zonecfg:global> set cpu-shares=5
zonecfg:global> exit

 
 
Example 8 Using Pattern Matching
 
The following commands illustrate zonecfg support for pattern matching. In the zone flexlm, enter:
 
 


zonecfg:flexlm> add device
zonecfg:flexlm:device> set match="/dev/cua/a00[2-5]"
zonecfg:flexlm:device> end

 
 
 
In the global zone, enter:
 
 


global# ls /dev/cua
a a000 a001 a002 a003 a004 a005 a006 a007 b

 
 
 
In the zone flexlm, enter:
 
 


flexlm# ls /dev/cua
a002 a003 a004 a005

 
 
Example 9 Setting a Cap for a Zone to Three CPUs
 
The following sequence uses the zonecfg command to set the CPU cap for a zone to three CPUs.
 
 


zonecfg:myzone> add capped-cpu
zonecfg:myzone>capped-cpu> set ncpus=3
zonecfg:myzone>capped-cpu>capped-cpu> end

 
 
 
The preceding sequence, which uses the capped-cpu property, is equivalent to the following sequence, which makes use of the zone.cpu-cap resource control.
 
 


zonecfg:myzone> add rctl
zonecfg:myzone:rctl> set name=zone.cpu-cap
zonecfg:myzone:rctl> add value (priv=privileged,limit=300,action=none)
zonecfg:myzone:rctl> end

 
 
Example 10 Using kstat to Monitor CPU Caps
 
The following command displays information about all CPU caps.
 
 


# kstat -n /cpucaps/
module: caps instance: 0
name: cpucaps_project_0 class: project_caps
above_sec 0
below_sec 2157
crtime 821.048183159
maxusage 2
nwait 0
snaptime 235885.637253027
usage 0
value 18446743151372347932
zonename global

module: caps instance: 0
name: cpucaps_project_1 class: project_caps
above_sec 0
below_sec 0
crtime 225339.192787265
maxusage 5
nwait 0
snaptime 235885.637591677
usage 5
value 18446743151372347932
zonename global

module: caps instance: 0
name: cpucaps_project_201 class: project_caps
above_sec 0
below_sec 235105
crtime 780.37961782
maxusage 100
nwait 0
snaptime 235885.637789687
usage 43
value 100
zonename global

module: caps instance: 0
name: cpucaps_project_202 class: project_caps
above_sec 0
below_sec 235094
crtime 791.72983782
maxusage 100
nwait 0
snaptime 235885.637967512
usage 48
value 100
zonename global

module: caps instance: 0
name: cpucaps_project_203 class: project_caps
above_sec 0
below_sec 235034
crtime 852.104401481
maxusage 75
nwait 0
snaptime 235885.638144304
usage 47
value 100
zonename global

module: caps instance: 0
name: cpucaps_project_86710 class: project_caps
above_sec 22
below_sec 235166
crtime 698.441717859
maxusage 101
nwait 0
snaptime 235885.638319871
usage 54
value 100
zonename global

module: caps instance: 0
name: cpucaps_zone_0 class: zone_caps
above_sec 100733
below_sec 134332
crtime 821.048177123
maxusage 207
nwait 2
snaptime 235885.638497731
usage 199
value 200
zonename global

module: caps instance: 1
name: cpucaps_project_0 class: project_caps
above_sec 0
below_sec 0
crtime 225360.256448422
maxusage 7
nwait 0
snaptime 235885.638714404
usage 7
value 18446743151372347932
zonename test_001

module: caps instance: 1
name: cpucaps_zone_1 class: zone_caps
above_sec 2
below_sec 10524
crtime 225360.256440278
maxusage 106
nwait 0
snaptime 235885.638896443
usage 7
value 100
zonename test_001

 
 
Example 11 Displaying CPU Caps for a Specific Zone or Project
 
Using the kstat -c and -i options, you can display CPU caps for a specific zone or project, as below. The first command produces a display for a specific project, the second for the same project within zone 1.
 
 


# kstat -c project_caps

# kstat -c project_caps -i 1

 
 

EXIT STATUS

The following exit values are returned:
 
0
 
Successful completion.
 
 
1
 
An error occurred.
 
 
2
 
Invalid usage.
 

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:
 
 
 
ATTRIBUTE TYPE ATTRIBUTE VALUE
Interface Stability Volatile
 

SEE ALSO

ppriv(1), prctl(1), zlogin(1), kstat(1M), mount(1M), pooladm(1M), poolcfg(1M), poold(1M), rcapd(1M), rctladm(1M), svcadm(1M), sysidtool(1M), zfs(1M), zoneadm(1M), priv_str_to_set(3C), kstat(3KSTAT), vfstab(4), attributes(5), brands(5), fnmatch(5), lx(5), privileges(5), resource_controls(5), security-flags(5), zones(5)
 
System Administration Guide: Solaris Containers-Resource Management, and Solaris Zones

NOTES

All character data used by zonecfg must be in US-ASCII encoding.
February 28, 2014