1 #
   2 # CDDL HEADER START
   3 #
   4 # The contents of this file are subject to the terms of the
   5 # Common Development and Distribution License (the "License").
   6 # You may not use this file except in compliance with the License.
   7 #
   8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9 # or http://www.opensolaris.org/os/licensing.
  10 # See the License for the specific language governing permissions
  11 # and limitations under the License.
  12 #
  13 # When distributing Covered Code, include this CDDL HEADER in each
  14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15 # If applicable, add the following below this CDDL HEADER, with the
  16 # fields enclosed by brackets "[]" replaced with your own identifying
  17 # information: Portions Copyright [yyyy] [name of copyright owner]
  18 #
  19 # CDDL HEADER END
  20 #
  21 # uts/intel/Makefile
  22 #
  23 # Copyright (c) 1999, 2010, Oracle and/or its affiliates. All rights reserved.
  24 # Copyright 2015 Igor Kozhukhov <ikozhukhov@gmail.com>
  25 #
  26 #       This makefile drives the production of all implementation architecture
  27 #       independent modules for Intel processors.
  28 
  29 UTSBASE = ..
  30 
  31 include Makefile.intel
  32 
  33 LINT_KMODS_X1   = $(LINT_KMODS:nsmb=)
  34 LINT_KMODS_X2   = $(LINT_KMODS_X1:smbfs=)
  35 LINT_KMODLIBS   = $(LINT_KMODS_X2:e1000g=)
  36 LINT_LIBS       = $(LINT_LIB) $(GEN_LINT_LIB) \
  37                   $(LINT_KMODLIBS:%=$(LINT_LIB_DIR)/llib-l%.ln)
  38 
  39 #
  40 # dprov is delivered in the SUNWcryptoint package.
  41 #
  42 DRV_KMODS       += dprov
  43 
  44 #
  45 #
  46 def             :=      TARGET= def
  47 def.prereq      :=      TARGET= def
  48 all             :=      TARGET= all
  49 all.prereq      :=      TARGET= all
  50 install         :=      TARGET= install
  51 install.prereq  :=      TARGET= install
  52 clean           :=      TARGET= clean
  53 clobber         :=      TARGET= clobber
  54 lint            :=      TARGET= lint
  55 lint.prereq     :=      TARGET= lint
  56 modlintlib      :=      TARGET= modlintlib
  57 modlist         :=      TARGET= modlist
  58 modlist         :=      NO_STATE= -K $$MODSTATE$$$$
  59 clean.lint      :=      TARGET= clean.lint
  60 check           :=      TARGET= check
  61 install_h       :=      TARGET= install_h
  62 install_h.prereq        :=      TARGET= install_h
  63 
  64 .KEEP_STATE:
  65 
  66 .PARALLEL:      $(PARALLEL_KMODS) $(XMODS) config $(LINT_DEPS)
  67 
  68 def all install clean clobber modlist: $(KMODS) $(XMODS) config
  69 
  70 clobber: clobber.targ
  71 
  72 #
  73 # Privilege constants
  74 #
  75 # NOTE: The rules for generating priv_const.c file are shared between all
  76 # processor architectures and and should be kept in sync. If they are changed in
  77 # this file make sure that sparc rules are updated as well.
  78 #
  79 PRIVS_C = $(SRC)/uts/common/os/priv_const.c
  80 
  81 $(PRIVS_C): $(PRIVS_AWK) $(PRIVS_DEF)
  82         $(AWK) -f $(PRIVS_AWK) < $(PRIVS_DEF) cfile=$@
  83 
  84 CLOBBERFILES += $(PRIVS_C)
  85 
  86 #
  87 # Prerequisites
  88 #
  89 # The uts/Makefile defines build parallelism for x86 platforms such that i86pc,
  90 # i86xpv and intel are all built in parallel. This requires building certain
  91 # parts before the parallel build can start. The uts/Makefile appends the
  92 # '.prereq' string to the original target and executes this Makefile to build
  93 # any prerequisites needed before the full parallel build can start. After that
  94 # make continues with normal targets.
  95 #
  96 # Any build prerequisites for x86 builds should be described here.
  97 #
  98 # genassym is used to build intel/dtrace and genunix, so it should be built
  99 # first.
 100 #
 101 # priv_const.c is required to build genunix.
 102 #
 103 # genunix is used by everyone to ctf-merge with. Genunix is CTF-merged with
 104 #   intel/ip so as a side effect this dependency builds intel/ip as part of the
 105 #   prerequisites.
 106 #
 107 # intel/dtrace depends on i86pc/genassym, so we need to build both
 108 # i86pc/genassym and intel/genassym.
 109 #
 110 all.prereq install.prereq def.prereq: genunix FRC
 111         @cd ../i86pc/genassym; pwd; $(MAKE) $(@:%.prereq=%)
 112 
 113 #
 114 # i86pc lint libraries should be built first
 115 #
 116 lint.prereq: FRC
 117         @cd ../i86pc; pwd; $(MAKE) $(NO_STATE) lint
 118 
 119 #
 120 # Nothing to do for any other prerequisite targets.
 121 #
 122 %.prereq:
 123 
 124 genunix: $(PRIVS_C)
 125 
 126 modlintlib clean.lint: $(LINT_KMODS) $(XMODS)
 127 
 128 $(KMODS) $(SUBDIRS) config:     FRC
 129         @cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET)
 130 
 131 $(XMODS):       FRC
 132         @if [ -f $@/Makefile  ]; then \
 133                 cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET); \
 134         else \
 135                 true; \
 136         fi
 137 
 138 install_h check:        FRC
 139         @cd sys; pwd; $(MAKE) $(TARGET)
 140         @cd asm; pwd; $(MAKE) $(TARGET)
 141         @cd ia32/sys; pwd; $(MAKE) $(TARGET)
 142         @cd amd64/sys; pwd; $(MAKE) $(TARGET)
 143 
 144 #
 145 # Work-around to disable acpica global crosscheck lint warnings
 146 #
 147 LGREP.intel =   grep -v 'intel/io/acpica'
 148 
 149 #
 150 #       Full kernel lint target.
 151 #
 152 LINT_TARGET     = globallint
 153 
 154 # workaround for multiply defined errors
 155 globallint := LINTFLAGS += -erroff=E_NAME_MULTIPLY_DEF2
 156 
 157 globallint:
 158         @pwd
 159         @-$(ECHO) "\nFULL KERNEL: global crosschecks:"
 160         @-$(LINT) $(LINTFLAGS) $(LINT_LIBS) 2>&1 | $(LGREP.intel) | $(LGREP.2)
 161 
 162 lint:   modlintlib .WAIT $(LINT_DEPS)
 163 
 164 include ../Makefile.targ