1 # 2 # CDDL HEADER START 3 # 4 # The contents of this file are subject to the terms of the 5 # Common Development and Distribution License (the "License"). 6 # You may not use this file except in compliance with the License. 7 # 8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 # or http://www.opensolaris.org/os/licensing. 10 # See the License for the specific language governing permissions 11 # and limitations under the License. 12 # 13 # When distributing Covered Code, include this CDDL HEADER in each 14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 # If applicable, add the following below this CDDL HEADER, with the 16 # fields enclosed by brackets "[]" replaced with your own identifying 17 # information: Portions Copyright [yyyy] [name of copyright owner] 18 # 19 # CDDL HEADER END 20 # 21 # 22 # Copyright (c) 1989, 2010, Oracle and/or its affiliates. All rights reserved. 23 # Copyright 2012 Nexenta Systems, Inc. All rights reserved. 24 # 25 # include global definitions 26 include ../Makefile.master 27 28 # 29 # List of architectures to build as part of the standard build. 30 # 31 # Some of these architectures are built in parallel (see i386_PARALLEL and 32 # sparc_PARALLEL). This requires building some parts first before parallel build 33 # can start. Platform make files know what should be built as a prerequisite for 34 # the parallel build to work. The i386_PREREQ and sparc_PREREQ variables tell 35 # which platform directory to enter to start making prerequisite dependencies. 36 # 37 sparc_ARCHITECTURES = sun4v sun4u sparc 38 39 i386_ARCHITECTURES = i86pc i86xpv intel 40 41 # 42 # For i386 all architectures can be compiled in parallel. 43 # 44 # intel/Makefile knows how to build prerequisites needed for parallel build. 45 # 46 i386_PREREQ = intel 47 i386_PARALLEL = $(i386_ARCHITECTURES) 48 49 # 50 # For sparc all architectures can be compiled in parallel. 51 # 52 # sun4/Makefile knows how to build prerequisites needed for parallel build. 53 # can start. 54 # 55 sparc_PREREQ = sun4 56 sparc_PARALLEL = $(sparc_ARCHITECTURES) 57 58 # 59 # Platforms defined in $(MACH)_PARALLEL are built in parallel. DUMMY is placed 60 # at the end in case $(MACH)_PARALLEL is empty to prevent everything going in 61 # parallel. 62 # 63 .PARALLEL: $($(MACH)_PARALLEL) DUMMY 64 65 # 66 # For build prerequisites we use a special target which is constructed by adding 67 # '.prereq' suffix to the $(MACH)_PREREQ. 68 # 69 PREREQ_TARGET = $($(MACH)_PREREQ:%=%.prereq) 70 71 72 def := TARGET= def 73 all := TARGET= all 74 install := TARGET= install 75 install_h := TARGET= install_h 76 clean := TARGET= clean 77 clobber := TARGET= clobber 78 clobber_h := TARGET= clobber 79 lint := TARGET= lint 80 clean.lint := TARGET= clean.lint 81 check := TARGET= check 82 modlist := TARGET= modlist 83 modlist := NO_STATE= -K $$MODSTATE$$$$ 84 85 .KEEP_STATE: 86 87 def all lint: all_h $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 88 89 install: all_h install_dirs $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 90 91 install_dirs: 92 @cd ..; pwd; $(MAKE) rootdirs 93 @pwd 94 95 # 96 # Rule to build prerequisites. The left part of the pattern will match 97 # PREREQ_TARGET. 98 # 99 # The location of the Makefile is determined by strippinng '.prereq' suffix from 100 # the target name. We add '.prereq' suffix to the target passed to the child 101 # Makefile so that it can distinguish prerequisite build from the regular one. 102 # 103 # 104 %.prereq: 105 @cd $(@:%.prereq=%); pwd; $(MAKE) $(NO_STATE) $(TARGET).prereq 106 107 # 108 # Rule to build architecture files. Build all required prerequisites and then 109 # build the rest (potentially in parallel). 110 # 111 $($(MACH)_ARCHITECTURES): $(PREREQ_TARGET) FRC 112 @cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET) 113 114 $(PMTMO_FILE) pmtmo_file: $(PATCH_MAKEUP_TABLE) 115 @if [ -z "$(PATCH_MAKEUP_TABLE)" ] ; then \ 116 echo 'ERROR: $$(PATCH_MAKEUP_TABLE) not set' \ 117 'in environment' >&2 ; \ 118 exit 1 ; \ 119 fi 120 RELEASE="$(RELEASE)" MACH="$(MACH)" \ 121 $(CTFCVTPTBL) -o $(PMTMO_FILE) $(PATCH_MAKEUP_TABLE) 122 123 # 124 # The following is the list of directories which contain Makefiles with 125 # targets to install header file. The machine independent headers are 126 # installed by invoking the Makefile in the directory containing the 127 # header files. Machine and architecture dependent headers are installed 128 # by invoking the main makefile for that architecture/machine which, 129 # in turn, is responsible for invoking the Makefiles which install headers. 130 # It is done this way so as not to assume that all of the header files in 131 # the architecture/machine dependent subdirectories are in completely 132 # isomorphic locations. 133 # 134 COMMON_HDRDIRS= common/avs \ 135 common/c2 \ 136 common/des \ 137 common/fs \ 138 common/gssapi \ 139 common/idmap \ 140 common/klm \ 141 common/inet \ 142 common/inet/ipf/netinet \ 143 common/inet/kssl \ 144 common/inet/nca \ 145 common/inet/sockmods/netpacket \ 146 common/io/bpf/net \ 147 common/io/fibre-channel/fca/qlc \ 148 common/io/lvm/md \ 149 common/ipp \ 150 common/net \ 151 common/netinet \ 152 common/nfs \ 153 common/pcmcia/sys \ 154 common/rpc \ 155 common/rpcsvc \ 156 common/sharefs \ 157 common/smb \ 158 common/smbsrv \ 159 common/sys \ 160 common/vm 161 162 163 # 164 # Subset of COMMON_HDRDIRS in which at least one header is generated 165 # at runtime (e.g., rpcgen), and in which "make clean" should run. 166 # Other directories should be included here, but do not yet have the 167 # necessary Makefile support (make clean). See 6414855. 168 # 169 DYNHDRDIRS = common/avs \ 170 common/gssapi \ 171 common/idmap \ 172 common/io/fibre-channel/fca/qlc \ 173 common/io/lvm/md \ 174 common/klm \ 175 common/rpc \ 176 common/rpcsvc \ 177 common/sys 178 179 sparc_HDRDIRS= sun/sys 180 i386_HDRDIRS= i86pc/vm i86xpv/vm 181 182 HDRDIRS= $(COMMON_HDRDIRS) $($(MACH)_HDRDIRS) 183 install_h check: $(HDRDIRS) $($(MACH)_ARCHITECTURES) 184 185 $(HDRDIRS): FRC 186 @cd $@; pwd; $(MAKE) $(TARGET) 187 188 # ensures that headers made by rpcgen and others are available in uts source 189 # for kernel builds to reference without building install_h 190 # 191 all_h: FRC 192 @cd common/sys; pwd; $(MAKE) $@ 193 @cd common/rpc; pwd; $(MAKE) $@ 194 @cd common/rpcsvc; pwd; $(MAKE) $@ 195 @cd common/gssapi; pwd; $(MAKE) $@ 196 @cd common/idmap; pwd; $(MAKE) $@ 197 @cd common/klm; pwd; $(MAKE) $@ 198 199 clean clobber: $($(MACH)_ARCHITECTURES) $(DYNHDRDIRS) 200 @if [ '$(PATCH_BUILD)' != '#' ] ; then \ 201 echo $(RM) $(PMTMO_FILE) ; \ 202 $(RM) $(PMTMO_FILE) ; \ 203 fi 204 205 # testing convenience 206 clobber_h: $(DYNHDRDIRS) 207 208 clean.lint modlist: $($(MACH)_ARCHITECTURES) 209 210 # 211 # Cross-reference customization: build a cross-reference over all of 212 # the supported architectures. Although there's no correct way to set 213 # the include path (since we don't know what architecture is the one 214 # the user will be interested in), it's historically been set to 215 # mirror the $(XRDIRS) list, and that works kinda sorta okay. 216 # 217 XRDIRS = $(sparc_ARCHITECTURES) $(i386_ARCHITECTURES) sun4 sfmmu \ 218 sun common 219 220 XRINCDIRS = $(XRDIRS) 221 222 cscope.out tags: FRC 223 $(XREF) -x $@ 224 225 FRC: