Print this page
4508 flowadm not working as documented, or documentation incorrect
4538 flowadm man page does not list lport and rport as output fields for show-flow
7210 flowadm does not have show-usage command described in the manual page
@@ -1,26 +1,21 @@
'\" te
+.\" Copyright 2020 Peter Tribble
.\" Copyright (c) 2009, Sun Microsystems, Inc. All Rights Reserved
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
.\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH FLOWADM 1M "April 9, 2016"
+.TH FLOWADM 1M "February 26, 2020"
.SH NAME
flowadm \- administer bandwidth resource control and priority for protocols,
services, containers, and virtual machines
.SH SYNOPSIS
-.LP
.nf
-\fBflowadm show-flow\fR [\fB-pP\fR] [\fB-S\fR] [\fB-s\fR [\fB-i\fR \fIinterval\fR]] [\fB-l\fR \fIlink\fR]
- [\fB-o\fR \fIfield\fR[,...]] [\fIflow\fR]
-.fi
-
-.LP
-.nf
\fBflowadm add-flow\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR \fIlink\fR \fB-a\fR \fIattr\fR=\fIvalue\fR[,...]
- \fB-p\fR \fIprop\fR=\fIvalue\fR[,...] \fIflow\fR
+ [\fB-p\fR \fIprop\fR=\fIvalue\fR[,...]] \fIflow\fR
\fBflowadm remove-flow\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] {\fB-l\fR \fIlink\fR | \fIflow\fR}
+\fBflowadm show-flow\fR [\fB-p\fR] [\fB-l\fR \fIlink\fR] [\fB-o\fR \fIfield\fR[,...]] [\fIflow\fR]
.fi
.LP
.nf
\fBflowadm set-flowprop\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-p\fR \fIprop\fR=\fIvalue\fR[,...] \fIflow\fR
@@ -27,18 +22,11 @@
\fBflowadm reset-flowprop\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] [\fB-p\fR \fIprop\fR[,...]] \fIflow\fR
\fBflowadm show-flowprop\fR [\fB-cP\fR] [\fB-l\fR \fIlink\fR] [\fB-o\fR \fIfield\fR[,...]]
[\fB-p\fR \fIprop\fR[,...]] [\fIflow\fR]
.fi
-.LP
-.nf
-\fBflowadm show-usage\fR [\fB-a\fR] [\fB-d\fR | {\fB-p\fR \fIplotfile\fR \fB-F\fR \fIformat\fR}] [\fB-s\fR \fItime\fR]
- [\fB-e\fR \fItime\fR] \fB-f\fR \fIfilename\fR [\fIflow\fR]
-.fi
-
.SH DESCRIPTION
-.LP
The \fBflowadm\fR command is used to create, modify, remove, and show
networking bandwidth and associated resources for a type of traffic on a
particular link.
.sp
.LP
@@ -59,284 +47,262 @@
.LP
Inbound and outbound packet are matched to flows in a very fast and scalable
way, so that limits can be enforced with minimal performance impact.
.sp
.LP
-The \fBflowadm\fR command can be used to identify a flow without imposing any
+The \fBflowadm\fR command can be used to define a flow without imposing any
bandwidth resource control. This would result in the traffic type getting its
own resources and queues so that it is isolated from rest of the networking
traffic for more observable and deterministic behavior.
.sp
.LP
\fBflowadm\fR is implemented as a set of subcommands with corresponding
options. Options are described in the context of each subcommand.
.SH SUBCOMMANDS
-.LP
The following subcommands are supported:
.sp
.ne 2
.na
-\fB\fBflowadm show-flow\fR [\fB-pP\fR] [\fB-s\fR [\fB-i\fR \fIinterval\fR]]
-[\fB-o\fR \fIfield\fR[,...]] [\fB-l\fR \fIlink\fR] [\fIflow\fR]\fR
+\fB\fBflowadm add-flow\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR
+\fIlink\fR \fB-a\fR \fIattr\fR=\fIvalue\fR[,...] [\fB-p\fR
+\fIprop\fR=\fIvalue\fR[,...]] \fIflow\fR\fR
.ad
.sp .6
.RS 4n
-Show flow configuration information (the default) or statistics, either for all
-flows, all flows on a link, or for the specified \fIflow\fR.
+Adds a flow to the system. The flow is identified by its flow attributes and
+properties.
.sp
-.ne 2
-.na
-\fB\fB-o\fR \fIfield\fR[,...]\fR
-.ad
-.sp .6
-.RS 4n
-A case-insensitive, comma-separated list of output fields to display. The field
-name must be one of the fields listed below, or a special value \fBall\fR, to
-display all fields. For each flow found, the following fields can be displayed:
+As part of identifying a particular flow, its bandwidth resource can be limited
+and its relative priority to other traffic can be specified. If no bandwidth
+limit or priority is specified, the traffic still gets its unique layer 2, 3,
+and 4 queues and processing threads, including NIC hardware resources (when
+supported), so that the selected traffic can be separated from others and can
+flow with minimal impact from other traffic.
.sp
.ne 2
.na
-\fB\fBflow\fR\fR
+\fB\fB-t\fR, \fB--temporary\fR\fR
.ad
.sp .6
.RS 4n
-The name of the flow.
+The changes are temporary and will not persist across reboots. Persistence is
+the default.
.RE
.sp
.ne 2
.na
-\fB\fBlink\fR\fR
+\fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
.ad
.sp .6
.RS 4n
-The name of the link the flow is on.
+Specifies an alternate root directory where \fBflowadm\fR should apply
+persistent creation.
.RE
.sp
.ne 2
.na
-\fB\fBipaddr\fR\fR
+\fB\fB-l\fR \fIlink\fR, \fB--link\fR=\fIlink\fR\fR
.ad
.sp .6
.RS 4n
-IP address of the flow. This can be either local or remote depending on how the
-flow was defined.
+Specify the link to which the flow will be added.
.RE
.sp
.ne 2
.na
-\fB\fBtransport\fR\fR
+\fB\fB-a\fR \fIattr\fR=\fIvalue\fR[,...], \fB--attr\fR=\fIvalue\fR\fR
.ad
.sp .6
.RS 4n
-The name of the layer for protocol to be used.
+A mandatory comma-separated list of attributes to be set to the specified
+values.
.RE
.sp
.ne 2
.na
-\fB\fBport\fR\fR
+\fB\fB-p\fR \fIprop\fR=\fIvalue\fR[,...], \fB--prop\fR=\fIvalue\fR[,...]\fR
.ad
.sp .6
.RS 4n
-Local port of service for flow.
+An optional comma-separated list of properties to be set to the specified
+values. Flow properties are documented in the "Flow Properties" section, below.
.RE
+.RE
+
.sp
.ne 2
.na
-\fB\fBdsfield\fR\fR
+\fB\fBflowadm remove-flow\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR
+{\fIlink\fR | \fIflow\fR}\fR
.ad
.sp .6
.RS 4n
-Differentiated services value for flow and mask used with \fBDSFIELD\fR value
-to state the bits of interest in the differentiated services field of the IP
-header.
-.RE
-
-.RE
-
+Remove an existing flow identified by its link or name.
.sp
.ne 2
.na
-\fB\fB-p\fR, \fB--parsable\fR\fR
+\fB\fB-t\fR, \fB--temporary\fR\fR
.ad
.sp .6
.RS 4n
-Display using a stable machine-parsable format.
+The changes are temporary and will not persist across reboots. Persistence is
+the default.
.RE
.sp
.ne 2
.na
-\fB\fB-P\fR, \fB--persistent\fR\fR
+\fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
.ad
.sp .6
.RS 4n
-Display persistent flow property information.
+Specifies an alternate root directory where \fBflowadm\fR should apply
+persistent removal.
.RE
.sp
.ne 2
.na
-\fB\fB-S\fR, \fB--continuous\fR\fR
+\fB\fB-l\fR \fIlink\fR | \fIflow\fR, \fB--link\fR=\fIlink\fR | \fIflow\fR\fR
.ad
.sp .6
.RS 4n
-Continuously display network utilization by flow in a manner similar to the way
-that \fBprstat\fR(1M) displays CPU utilization by process.
+If a link is specified, remove all flows from that link. If a single flow is
+specified, remove only that flow.
.RE
+.RE
+
.sp
.ne 2
.na
-\fB\fB-s\fR, \fB--statistics\fR\fR
+\fB\fBflowadm show-flow\fR [\fB-pP\fR] [\fB-s\fR [\fB-i\fR \fIinterval\fR]]
+[\fB-o\fR \fIfield\fR[,...]] [\fB-l\fR \fIlink\fR] [\fIflow\fR]\fR
.ad
.sp .6
.RS 4n
-Displays flow statistics.
-.RE
-
+Show flow configuration information, either for all
+flows, all flows on a link, or for the specified \fIflow\fR.
.sp
.ne 2
.na
-\fB\fB-i\fR \fIinterval\fR, \fB--interval\fR=\fIinterval\fR\fR
+\fB\fB-o\fR \fIfield\fR[,...]\fR
.ad
.sp .6
.RS 4n
-Used with the \fB-s\fR option to specify an interval, in seconds, at which
-statistics should be displayed. If this option is not specified, statistics are
-displayed once.
-.RE
-
+A case-insensitive, comma-separated list of output fields to display. The field
+name must be one of the fields listed below, or a special value \fBall\fR, to
+display all fields. For each flow found, the following fields can be displayed:
.sp
.ne 2
.na
-\fB\fB-l\fR \fIlink\fR, \fB--link\fR=\fIlink\fR | \fIflow\fR\fR
+\fB\fBflow\fR\fR
.ad
.sp .6
.RS 4n
-Display information for all flows on the named link or information for the
-named flow.
+The name of the flow.
.RE
-.RE
-
.sp
.ne 2
.na
-\fB\fBflowadm add-flow\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR
-\fIlink\fR \fB-a\fR \fIattr\fR=\fIvalue\fR[,...] \fB-p\fR
-\fIprop\fR=\fIvalue\fR[,...] \fIflow\fR\fR
+\fB\fBlink\fR\fR
.ad
.sp .6
.RS 4n
-Adds a flow to the system. The flow is identified by its flow attributes and
-properties.
+The name of the link the flow is on.
+.RE
+
.sp
-As part of identifying a particular flow, its bandwidth resource can be limited
-and its relative priority to other traffic can be specified. If no bandwidth
-limit or priority is specified, the traffic still gets its unique layer 2, 3,
-and 4 queues and processing threads, including NIC hardware resources (when
-supported), so that the selected traffic can be separated from others and can
-flow with minimal impact from other traffic.
-.sp
.ne 2
.na
-\fB\fB-t\fR, \fB--temporary\fR\fR
+\fB\fBipaddr\fR\fR
.ad
.sp .6
.RS 4n
-The changes are temporary and will not persist across reboots. Persistence is
-the default.
+IP address of the flow. This can be either local or remote depending on how the
+flow was defined.
.RE
.sp
.ne 2
.na
-\fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
+\fB\fBproto\fR\fR
.ad
.sp .6
.RS 4n
-Specifies an alternate root directory where \fBflowadm\fR should apply
-persistent creation.
+The name of the layer for protocol to be used.
.RE
.sp
.ne 2
.na
-\fB\fB-l\fR \fIlink\fR, \fB--link\fR=\fIlink\fR\fR
+\fB\fBlport\fR\fR
.ad
.sp .6
.RS 4n
-Specify the link to which the flow will be added.
+Local port of service for flow.
.RE
.sp
.ne 2
.na
-\fB\fB-a\fR \fIattr\fR=\fIvalue\fR[,...], \fB--attr\fR=\fIvalue\fR\fR
+\fB\fBrport\fR\fR
.ad
.sp .6
.RS 4n
-A comma-separated list of attributes to be set to the specified values.
+Remote port of service for flow.
.RE
.sp
.ne 2
.na
-\fB\fB-p\fR \fIprop\fR=\fIvalue\fR[,...], \fB--prop\fR=\fIvalue\fR[,...]\fR
+\fB\fBdsfld\fR\fR
.ad
.sp .6
.RS 4n
-A comma-separated list of properties to be set to the specified values.
+Differentiated services value for flow and mask used with \fBDSFIELD\fR value
+to state the bits of interest in the differentiated services field of the IP
+header.
.RE
.RE
.sp
.ne 2
.na
-\fB\fBflowadm remove-flow\fR [\fB-t\fR] [\fB-R\fR \fIroot-dir\fR] \fB-l\fR
-{\fIlink\fR | \fIflow\fR}\fR
+\fB\fB-p\fR, \fB--parsable\fR\fR
.ad
.sp .6
.RS 4n
-Remove an existing flow identified by its link or name.
-.sp
-.ne 2
-.na
-\fB\fB-t\fR, \fB--temporary\fR\fR
-.ad
-.sp .6
-.RS 4n
-The changes are temporary and will not persist across reboots. Persistence is
-the default.
+Display using a stable machine-parsable format.
.RE
.sp
.ne 2
.na
-\fB\fB-R\fR \fIroot-dir\fR, \fB--root-dir\fR=\fIroot-dir\fR\fR
+\fB\fB-P\fR, \fB--persistent\fR\fR
.ad
.sp .6
.RS 4n
-Specifies an alternate root directory where \fBflowadm\fR should apply
-persistent removal.
+Display persistent flow property information.
.RE
.sp
.ne 2
.na
-\fB\fB-l\fR \fIlink\fR | \fIflow\fR, \fB--link\fR=\fIlink\fR | \fIflow\fR\fR
+\fB\fB-l\fR \fIlink\fR, \fB--link\fR=\fIlink\fR | \fIflow\fR\fR
.ad
.sp .6
.RS 4n
-If a link is specified, remove all flows from that link. If a single flow is
-specified, remove only that flow.
+Display information for all flows on the named link or information for the
+named flow.
.RE
.RE
.sp
@@ -346,11 +312,11 @@
\fIprop\fR=\fIvalue\fR[,...] \fIflow\fR\fR
.ad
.sp .6
.RS 4n
Set values of one or more properties on the flow specified by name. The
-complete list of properties can be retrieved using the \fBshow-flow\fR
+complete list of properties can be retrieved using the \fBshow-flowprop\fR
subcommand.
.sp
.ne 2
.na
\fB\fB-t\fR, \fB--temporary\fR\fR
@@ -532,104 +498,11 @@
A comma-separated list of properties to show.
.RE
.RE
-.sp
-.ne 2
-.na
-\fB\fBflowadm show-usage\fR [\fB-a\fR] [\fB-d\fR | {\fB-p\fR \fIplotfile\fR
-\fB-F\fR \fIformat\fR}] [\fB-s\fR \fItime\fR] [\fB-e\fR \fItime\fR]
-[\fIflow\fR]\fR
-.ad
-.sp .6
-.RS 4n
-Show the historical network flow usage from a stored extended accounting file.
-Configuration and enabling of network accounting through \fBacctadm\fR(1M) is
-required. The default output will be the summary of flow usage for the entire
-period of time in which extended accounting was enabled.
-.sp
-.ne 2
-.na
-\fB\fB-a\fR\fR
-.ad
-.sp .6
-.RS 4n
-Display all historical network usage for the specified period of time during
-which extended accounting is enabled. This includes the usage information for
-the flows that have already been deleted.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fB-d\fR\fR
-.ad
-.sp .6
-.RS 4n
-Display the dates for which there is logging information. The date is in the
-format \fIDD\fR/\fIMM\fR/\fIYYYY\fR.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fB-F\fR \fIformat\fR\fR
-.ad
-.sp .6
-.RS 4n
-Specifies the format of \fIplotfile\fR that is specified by the \fB-p\fR
-option. As of this release, \fBgnuplot\fR is the only supported format.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fB-p\fR \fIplotfile\fR\fR
-.ad
-.sp .6
-.RS 4n
-When specified with \fB-s\fR or \fB-e\fR (or both), outputs flow usage data to
-a file of the format specified by the \fB-F\fR option, which is required.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fB-s\fR \fItime\fR, \fB-e\fR \fItime\fR\fR
-.ad
-.sp .6
-.RS 4n
-Start and stop times for data display. Time is in the format
-\fIYYYY\fR.\fIMM\fR.\fIDD\fR,\fIhh\fR:\fImm\fR:\fIss\fR.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fB-f\fR \fIfilename\fR\fR
-.ad
-.sp .6
-.RS 4n
-Read extended accounting records of network flow usage from \fIfilename\fR.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fIflow\fR\fR
-.ad
-.sp .6
-.RS 4n
-If specified, display the network flow usage only from the named flow.
-Otherwise, display network usage from all flows.
-.RE
-
-.RE
-
.SS "Flow Attributes"
-.LP
The flow operand that identify a flow in a \fBflowadm\fR command is a
comma-separated list of one or more keyword, value pairs from the list below.
.sp
.ne 2
.na
@@ -654,11 +527,11 @@
\fB\fBremote_ip\fR[\fB/\fR\fIprefix_len\fR]\fR
.ad
.sp .6
.RS 4n
Identifies a network flow by the remote IP address. The syntax is the same as
-\fBlocal_ip\fR attributes
+the \fBlocal_ip\fR attribute.
.RE
.sp
.ne 2
.na
@@ -681,10 +554,20 @@
.RE
.sp
.ne 2
.na
+\fB\fBremote_port\fR\fR
+.ad
+.sp .6
+.RS 4n
+Identifies a service specified by the remote port.
+.RE
+
+.sp
+.ne 2
+.na
\fB\fBdsfield\fR[\fB:\fR\fIdsfield_mask\fR]\fR
.ad
.sp .6
.RS 4n
Identifies the 8-bit differentiated services field (as defined in RFC 2474).
@@ -697,32 +580,31 @@
is used. Both the \fBdsfield\fR value and mask must be in hexadecimal.
.RE
.sp
.LP
-The following five types of combinations of attributes are supported:
+The following six types of combinations of attributes are supported:
.sp
.in +2
.nf
local_ip[/\fIprefixlen\fR]=\fIaddress\fR
remote_ip[/\fIprefixlen\fR]=\fIaddress\fR
transport={tcp|udp|sctp|icmp|icmpv6}
transport={tcp|udp|sctp},local_port=\fIport\fR
+transport={tcp|udp|sctp},remote_port=\fIport\fR
dsfield=\fIval\fR[:\fIdsfield_mask\fR]
.fi
.in -2
.sp
.sp
.LP
-On a given link, the combinations above are mutually exclusive. An attempt to
-create flows of different combinations will fail.
+On a given link, the types of combinations above are mutually exclusive. An
+attempt to create flows of different types on a given link will fail.
.SS "Restrictions"
-.LP
There are individual flow restrictions and flow restrictions per zone.
.SS "Individual Flow Restrictions"
-.LP
Restrictions on individual flows do not require knowledge of other flows that
have been added to the link.
.sp
.LP
An attribute can be listed only once for each flow. For example, the following
@@ -764,16 +646,14 @@
.fi
.in -2
.sp
.SS "Flow Restrictions Per Zone"
-.LP
Within a zone, no two flows can have the same name. After adding a flow with
the link specified, the link will not be required for display, modification, or
deletion of the flow.
.SS "Flow Properties"
-.LP
The following flow properties are supported. Note that the ability to set a
given property to a given value depends on the driver and hardware.
.sp
.ne 2
.na
@@ -797,11 +677,10 @@
Sets the relative priority for the flow. The value can be given as one of the
tokens \fBhigh\fR, \fBmedium\fR, or \fBlow\fR. The default is \fBmedium\fR.
.RE
.SH EXAMPLES
-.LP
\fBExample 1 \fRCreating a Policy Around a Mission-Critical Port
.sp
.LP
The command below creates a policy around inbound HTTPS traffic on an HTTPS
server so that HTTPS obtains dedicated NIC hardware and kernel TCP/IP
@@ -811,12 +690,12 @@
.sp
.in +2
.nf
# \fBflowadm add-flow -l bge0 -a transport=TCP,local_port=443 https-1\fR
# \fBflowadm show-flow -l bge0\fR
-FLOW LINK IP ADDR PROTO PORT DSFLD
-https1 bge0 -- tcp 443 --
+FLOW LINK IPADDR PROTO LPORT RPORT DSFLD
+https1 bge0 -- tcp 443 -- --
.fi
.in -2
.sp
.LP
@@ -830,17 +709,17 @@
.sp
.in +2
.nf
# \fBflowadm set-flowprop -p maxbw=500M,priority=high https-1\fR
# \fBflowadm show-flow https-1\fR
-FLOW LINK IP ADDR PROTO PORT DSFLD
-https1 bge0 -- tcp 443 --
+FLOW LINK IPADDR PROTO LPORT RPORT DSFLD
+https-1 bge0 -- tcp 443 -- --
# \fBflowadm show-flowprop https-1\fR
FLOW PROPERTY VALUE DEFAULT POSSIBLE
https-1 maxbw 500 -- --
-https-1 priority HIGH -- LOW,NORMAL,HIGH
+https-1 priority high -- low,medium,high
.fi
.in -2
.sp
.LP
@@ -859,39 +738,13 @@
.fi
.in -2
.sp
.LP
-\fBExample 4 \fRShowing Flow Usage
+\fBExample 4 \fRSetting Policy, Making Use of \fBdsfield\fR Attribute
.sp
.LP
-Flow usage statistics can be stored using the extended accounting facility,
-\fBacctadm\fR(1M).
-
-.sp
-.in +2
-.nf
-# \fBacctadm -e extended -f /var/log/net.log net\fR
-
-# \fBacctadm net\fR
-Network accounting: active
-Network accounting file: /var/log/net.log
-Tracked Network resources: extended
-Untracked Network resources: none
-.fi
-.in -2
-.sp
-
-.sp
-.LP
-The historical data that was saved can be retrieved in summary form using the
-\fBshow-usage\fR subcommand of \fBflowadm\fR.
-
-.LP
-\fBExample 5 \fRSetting Policy, Making Use of \fBdsfield\fR Attribute
-.sp
-.LP
The following command sets a policy for EF PHB (DSCP value of 101110 from RFC
2598) with a bandwidth of 500 Mbps and a high priority. The \fBdsfield\fR value
for this flow will be \fB0x2e\fR (101110) with the \fBdsfield_mask\fR being
\fB0xfc\fR (because we want to ignore the 2 least significant bits).
@@ -902,75 +755,10 @@
-p maxbw=500M,priority=high efphb-flow\fR
.fi
.in -2
.sp
-.sp
-.LP
-Display summary information:
-
-.sp
-.in +2
-.nf
-# \fBflowadm show-usage -f /var/log/net.log\fR
-FLOW DURATION IPACKETS RBYTES OPACKETS OBYTES BANDWIDTH
-flowtcp 100 1031 546908 0 0 43.76 Kbps
-flowudp 0 0 0 0 0 0.00 Mbps
-.fi
-.in -2
-.sp
-
-.sp
-.LP
-Display dates for which logging information is available:
-
-.sp
-.in +2
-.nf
-# \fBflowadm show-usage -d -f /var/log/net.log\fR
-02/19/2008
-.fi
-.in -2
-.sp
-
-.sp
-.LP
-Display logging information for \fBflowtcp\fR starting at 02/19/2008, 10:38:46
-and ending at 02/19/2008, 10:40:06:
-
-.sp
-.in +2
-.nf
-# \fBflowadm show-usage -s 02/19/2008,10:39:06 -e 02/19/2008,10:40:06 \e
--f /var/log/net.log flowtcp\fR
-FLOW TIME IPACKETS RBYTES OPACKETS OBYTES BANDWIDTH
-flowtcp 10:39:06 1 1546 4 6539 3.23 Kbps
-flowtcp 10:39:26 2 3586 5 9922 5.40 Kbps
-flowtcp 10:39:46 1 240 1 216 182.40 bps
-flowtcp 10:40:06 0 0 0 0 0.00 bps
-.fi
-.in -2
-.sp
-
-.sp
-.LP
-Output the same information as above as a plotfile:
-
-.sp
-.in +2
-.nf
-# \fBflowadm show-usage -s 02/19/2008,10:39:06 -e 02/19/2008,10:40:06 \e
--p /home/plot/myplot -F gnuplot -f /var/log/net.log flowtcp\fR
-# \fBTime tcp-flow\fR
-10:39:06 3.23
-10:39:26 5.40
-10:39:46 0.18
-10:40:06 0.00
-.fi
-.in -2
-.sp
-
.SH EXIT STATUS
.ne 2
.na
\fB\fB0\fR\fR
.ad
@@ -988,11 +776,10 @@
.RS 4n
An error occurred.
.RE
.SH ATTRIBUTES
-.LP
See \fBattributes\fR(5) for descriptions of the following attributes:
.sp
.sp
.TS
@@ -1003,8 +790,12 @@
_
Interface Stability Committed
.TE
.SH SEE ALSO
-.LP
-\fBacctadm\fR(1M), \fBdladm\fR(1M), \fBifconfig\fR(1M), \fBprstat\fR(1M),
-\fBroute\fR(1M), \fBattributes\fR(5), \fBdlpi\fR(7P)
+\fBdladm\fR(1M), \fBflowstat\fR(1M), \fBifconfig\fR(1M),
+\fBroute\fR(1M), \fBattributes\fR(5)
+
+.SH NOTES
+The display of statistics by the \fBshow-flow\fR subcommand, and the
+\fBshow-usage\fR subcommand, have been removed. This functionality can
+now be accessed using the \fBflowstat\fR(1M) utility.