12315 errors in section 7i of the manual

*** 114,124 ****
       independent of any backspacing or tabbing that may have been done.  The
       REPRINT character (the character Control-r) prints a newline followed by
       all characters that have not been read.  Reprinting also occurs
       automatically if characters that would normally be erased from the screen
       are fouled by program output.  The characters are reprinted as if they
!      were being echoed; consequencely, if ECHO is not set, they are not
       printed.
  
       The ERASE, ERASE2, and KILL characters may be entered literally by
       preceding them with the escape character.  In this case, the escape
       character is not read.  The erase, erase2, and kill characters may be
--- 114,124 ----
       independent of any backspacing or tabbing that may have been done.  The
       REPRINT character (the character Control-r) prints a newline followed by
       all characters that have not been read.  Reprinting also occurs
       automatically if characters that would normally be erased from the screen
       are fouled by program output.  The characters are reprinted as if they
!      were being echoed; consequently, if ECHO is not set, they are not
       printed.
  
       The ERASE, ERASE2, and KILL characters may be entered literally by
       preceding them with the escape character.  In this case, the escape
       character is not read.  The erase, erase2, and kill characters may be
*** 206,216 ****
             represents a read timer.
  
       These two points highlight the dual purpose of the MIN/TIME feature.
       Cases A and B, where MIN > 0, exist to handle burst mode activity (for
       example, file transfer programs), where a program would like to process
!      at least MIN characters at a time.  In case A, the inteercharacter timer
       is activated by a user as a safety measure; in case B, the timer is
       turned off.
  
       Cases C and D exist to handle single character, timed transfers.  These
       cases are readily adaptable to screen-based applications that need to
--- 206,216 ----
             represents a read timer.
  
       These two points highlight the dual purpose of the MIN/TIME feature.
       Cases A and B, where MIN > 0, exist to handle burst mode activity (for
       example, file transfer programs), where a program would like to process
!      at least MIN characters at a time.  In case A, the intercharacter timer
       is activated by a user as a safety measure; in case B, the timer is
       turned off.
  
       Cases C and D exist to handle single character, timed transfers.  These
       cases are readily adaptable to screen-based applications that need to
*** 223,233 ****
       be returned to the user.
  
     Writing Characters
       When one or more characters are written, they are transmitted to the
       terminal as soon as previously written characters have finished typing.
!      nputt characters are echoed as they are typed if echoing has been
       enabled.  If a process produces characters more rapidly than they can be
       typed, it will be suspended when its output queue exceeds some limit.
       When the queue is drained down to some threshold, the program is resumed.
  
     Special Characters
--- 223,233 ----
       be returned to the user.
  
     Writing Characters
       When one or more characters are written, they are transmitted to the
       terminal as soon as previously written characters have finished typing.
!      Input characters are echoed as they are typed if echoing has been
       enabled.  If a process produces characters more rapidly than they can be
       typed, it will be suspended when its output queue exceeds some limit.
       When the queue is drained down to some threshold, the program is resumed.
  
     Special Characters
*** 347,357 ****
       allocated to the session will receive appropriate SIGTTOU and SIGTTIN
       signals.  Unless other arrangements have been made, this signal causes
       the processes to stop.
  
       The controlling terminal will remain in this state until it is
!      reinitialized ithh a successful open by the controlling process, or
       deallocated by the controlling process.
  
     Terminal Parameters
       The parameters that control the behavior of devices and modules providing
       the termios interface are specified by the termios structure defined by
--- 347,357 ----
       allocated to the session will receive appropriate SIGTTOU and SIGTTIN
       signals.  Unless other arrangements have been made, this signal causes
       the processes to stop.
  
       The controlling terminal will remain in this state until it is
!      reinitialized with a successful open by the controlling process, or
       deallocated by the controlling process.
  
     Terminal Parameters
       The parameters that control the behavior of devices and modules providing
       the termios interface are specified by the termios structure defined by
*** 1070,1075 ****
  SEE ALSO
       stty(1), fork(2), getpgid(2), getsid(2), ioctl(2), setsid(2),
       sigaction(2), signal(3C), tcsetpgrp(3C), termios(3C), signal.h(3HEAD),
       streamio(7I)
  
! illumos                         March 17, 2019                         illumos
--- 1070,1075 ----
  SEE ALSO
       stty(1), fork(2), getpgid(2), getsid(2), ioctl(2), setsid(2),
       sigaction(2), signal(3C), tcsetpgrp(3C), termios(3C), signal.h(3HEAD),
       streamio(7I)
  
! illumos                        February 17, 2020                       illumos