1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21 /*
22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved.
23 * Use is subject to license terms.
24 */
25 /*
26 * Copyright 2018 Joyent, Inc.
27 */
28
29 #ifndef _SYS_MACHCPUVAR_H
30 #define _SYS_MACHCPUVAR_H
31
32 #ifdef __cplusplus
33 extern "C" {
34 #endif
35
36 #include <sys/inttypes.h>
37 #include <sys/x_call.h>
38 #include <sys/tss.h>
39 #include <sys/segments.h>
40 #include <sys/rm_platter.h>
41 #include <sys/avintr.h>
42 #include <sys/pte.h>
43 #include <sys/stddef.h>
44 #include <sys/debug.h>
45 #include <sys/cpuvar.h>
46
47 #ifndef _ASM
48 /*
49 * On a virtualized platform a virtual cpu may not be actually
50 * on a physical cpu, especially in situations where a configuration has
51 * more vcpus than pcpus. This function tells us (if it's able) if the
52 * specified vcpu is currently running on a pcpu. Note if it is not
53 * known or not able to determine, it will return the unknown state.
54 */
55 #define VCPU_STATE_UNKNOWN 0
56 #define VCPU_ON_PCPU 1
57 #define VCPU_NOT_ON_PCPU 2
58
59 extern int vcpu_on_pcpu(processorid_t);
60
61 /*
62 * Machine specific fields of the cpu struct
63 * defined in common/sys/cpuvar.h.
64 *
65 * Note: This is kinda kludgy but seems to be the best
66 * of our alternatives.
67 */
68
69 struct cpuid_info;
70 struct cpu_ucode_info;
71 struct cmi_hdl;
72
73 /*
74 * A note about the hypervisor affinity bits: a one bit in the affinity mask
75 * means the corresponding event channel is allowed to be serviced
76 * by this cpu.
77 */
78 struct xen_evt_data {
79 ulong_t pending_sel[PIL_MAX + 1]; /* event array selectors */
80 ulong_t pending_evts[PIL_MAX + 1][sizeof (ulong_t) * 8];
81 ulong_t evt_affinity[sizeof (ulong_t) * 8]; /* service on cpu */
82 };
83
84 struct kpti_frame {
85 uint64_t kf_lower_redzone;
86
87 /* Stashed value of %cr3 when we entered the trampoline. */
88 greg_t kf_tr_cr3;
89
90 /*
91 * We use %r13-r14 as scratch registers in the trampoline code,
92 * so stash those here "below" the rest of the stack so they can be
93 * pushed/popped if needed.
94 */
95 greg_t kf_r14;
96 greg_t kf_r13;
97
98 /*
99 * Part of this struct is used as the HW stack frame when taking an
100 * interrupt on the user page table. The CPU is going to push a bunch
101 * of regs onto the stack pointer set in the TSS/IDT (which we set to
102 * &kf_rsp here).
103 *
104 * This is only a temporary holding area for them (we'll move them over
105 * to the real interrupt stack once we've set %cr3).
106 *
107 * Note that these must be cleared during a process switch on this cpu.
108 */
109 greg_t kf_err; /* Bottom of initial hw stack frame */
110 greg_t kf_rip;
111 greg_t kf_cs;
112 greg_t kf_rflags;
113 greg_t kf_rsp;
114 greg_t kf_ss;
115
116 greg_t kf_tr_rsp; /* Top of HW stack frame */
117 /* We also write this with the %rsp value on tramp entry */
118
119 /* Written to 0x1 when this kpti_frame is in use. */
120 uint64_t kf_tr_flag;
121
122 uint64_t kf_middle_redzone;
123
124 /*
125 * The things we need to write to %cr3 to change between page tables.
126 * These live "above" the HW stack.
127 */
128 greg_t kf_kernel_cr3;
129 greg_t kf_user_cr3;
130 greg_t kf_tr_ret_rsp;
131
132 uint64_t kf_unused; /* For 16-byte align */
133
134 uint64_t kf_upper_redzone;
135 };
136
137 typedef struct cpu_ht {
138 lock_t ch_lock;
139 char ch_pad[56];
140 struct cpu *ch_sib;
141 volatile uint64_t ch_intr_depth;
142 volatile uint64_t ch_state;
143 volatile uint64_t ch_sibstate;
144 } cpu_ht_t;
145
146 /*
147 * This first value, MACHCPU_SIZE is the size of all the members in the cpu_t
148 * AND struct machcpu, before we get to the mcpu_pad and the kpti area.
149 * The KPTI is used to contain per-CPU data that is visible in both sets of
150 * page-tables, and hence must be page-aligned and page-sized. See
151 * hat_pcp_setup().
152 *
153 * There are CTASSERTs in os/intr.c that verify this all works out.
154 */
155 #define MACHCPU_SIZE (1568 + 688)
156 #define MACHCPU_PAD (MMU_PAGESIZE - MACHCPU_SIZE)
157 #define MACHCPU_PAD2 (MMU_PAGESIZE - 16 - 3 * sizeof (struct kpti_frame))
158
159 struct machcpu {
160 /*
161 * x_call fields - used for interprocessor cross calls
162 */
163 struct xc_msg *xc_msgbox;
164 struct xc_msg *xc_free;
165 xc_data_t xc_data;
166 uint32_t xc_wait_cnt;
167 volatile uint32_t xc_work_cnt;
168
169 int mcpu_nodeid; /* node-id */
170 int mcpu_pri; /* CPU priority */
171
172 struct hat *mcpu_current_hat; /* cpu's current hat */
173
174 struct hat_cpu_info *mcpu_hat_info;
175
176 volatile ulong_t mcpu_tlb_info;
177
178 /* i86 hardware table addresses that cannot be shared */
179
180 user_desc_t *mcpu_gdt; /* GDT */
181 gate_desc_t *mcpu_idt; /* current IDT */
182
183 tss_t *mcpu_tss; /* TSS */
184 void *mcpu_ldt;
185 size_t mcpu_ldt_len;
186
187 kmutex_t mcpu_ppaddr_mutex;
188 caddr_t mcpu_caddr1; /* per cpu CADDR1 */
189 caddr_t mcpu_caddr2; /* per cpu CADDR2 */
190 uint64_t mcpu_caddr1pte;
191 uint64_t mcpu_caddr2pte;
192
193 struct softint mcpu_softinfo;
194 uint64_t pil_high_start[HIGH_LEVELS];
195 uint64_t intrstat[PIL_MAX + 1][2];
196
197 struct cpuid_info *mcpu_cpi;
198
199 #if defined(__amd64)
200 greg_t mcpu_rtmp_rsp; /* syscall: temporary %rsp stash */
201 greg_t mcpu_rtmp_r15; /* syscall: temporary %r15 stash */
202 #endif
203
204 struct vcpu_info *mcpu_vcpu_info;
205 uint64_t mcpu_gdtpa; /* hypervisor: GDT physical address */
206
207 uint16_t mcpu_intr_pending; /* hypervisor: pending intrpt levels */
208 uint16_t mcpu_ec_mbox; /* hypervisor: evtchn_dev mailbox */
209 struct xen_evt_data *mcpu_evt_pend; /* hypervisor: pending events */
210
211 volatile uint32_t *mcpu_mwait; /* MONITOR/MWAIT buffer */
212 void (*mcpu_idle_cpu)(void); /* idle function */
213 uint16_t mcpu_idle_type; /* CPU next idle type */
214 uint16_t max_cstates; /* supported max cstates */
215
216 struct cpu_ucode_info *mcpu_ucode_info;
217
218 void *mcpu_pm_mach_state;
219 struct cmi_hdl *mcpu_cmi_hdl;
220 void *mcpu_mach_ctx_ptr;
221
222 /*
223 * A stamp that is unique per processor and changes
224 * whenever an interrupt happens. Userful for detecting
225 * if a section of code gets interrupted.
226 * The high order 16 bits will hold the cpu->cpu_id.
227 * The low order bits will be incremented on every interrupt.
228 */
229 volatile uint32_t mcpu_istamp;
230
231 cpu_ht_t mcpu_ht;
232
233 char mcpu_pad[MACHCPU_PAD];
234
235 /* This is the start of the page */
236 char mcpu_pad2[MACHCPU_PAD2];
237 struct kpti_frame mcpu_kpti;
238 struct kpti_frame mcpu_kpti_flt;
239 struct kpti_frame mcpu_kpti_dbg;
240 char mcpu_pad3[16];
241 };
242
243 #define NINTR_THREADS (LOCK_LEVEL-1) /* number of interrupt threads */
244 #define MWAIT_HALTED (1) /* mcpu_mwait set when halting */
245 #define MWAIT_RUNNING (0) /* mcpu_mwait set to wakeup */
246 #define MWAIT_WAKEUP_IPI (2) /* need IPI to wakeup */
247 #define MWAIT_WAKEUP(cpu) (*((cpu)->cpu_m.mcpu_mwait) = MWAIT_RUNNING)
248
249 #endif /* _ASM */
250
251 /* Please DON'T add any more of this namespace-poisoning sewage here */
252
253 #define cpu_nodeid cpu_m.mcpu_nodeid
254 #define cpu_pri cpu_m.mcpu_pri
255 #define cpu_current_hat cpu_m.mcpu_current_hat
256 #define cpu_hat_info cpu_m.mcpu_hat_info
257 #define cpu_ppaddr_mutex cpu_m.mcpu_ppaddr_mutex
258 #define cpu_gdt cpu_m.mcpu_gdt
259 #define cpu_idt cpu_m.mcpu_idt
260 #define cpu_tss cpu_m.mcpu_tss
261 #define cpu_caddr1 cpu_m.mcpu_caddr1
262 #define cpu_caddr2 cpu_m.mcpu_caddr2
263 #define cpu_softinfo cpu_m.mcpu_softinfo
264 #define cpu_caddr1pte cpu_m.mcpu_caddr1pte
265 #define cpu_caddr2pte cpu_m.mcpu_caddr2pte
266
267 #ifdef __cplusplus
268 }
269 #endif
270
271 #endif /* _SYS_MACHCPUVAR_H */