1 #
   2 # CDDL HEADER START
   3 #
   4 # The contents of this file are subject to the terms of the
   5 # Common Development and Distribution License (the "License").
   6 # You may not use this file except in compliance with the License.
   7 #
   8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9 # or http://www.opensolaris.org/os/licensing.
  10 # See the License for the specific language governing permissions
  11 # and limitations under the License.
  12 #
  13 # When distributing Covered Code, include this CDDL HEADER in each
  14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15 # If applicable, add the following below this CDDL HEADER, with the
  16 # fields enclosed by brackets "[]" replaced with your own identifying
  17 # information: Portions Copyright [yyyy] [name of copyright owner]
  18 #
  19 # CDDL HEADER END
  20 #
  21 # Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
  22 # Copyright 2015 Nexenta Systems, Inc.  All rights reserved.
  23 # Copyright 2012 Joshua M. Clulow <josh@sysmgr.org>
  24 # Copyright 2015, OmniTI Computer Consulting, Inc. All rights reserved.
  25 # Copyright 2016 RackTop Systems.
  26 # Copyright 2019 OmniOS Community Edition (OmniOSce) Association.
  27 # Copyright 2020 Joyent, Inc.
  28 #
  29 # - This file is sourced by "bldenv" and "nightly" and should not
  30 #   be executed directly.
  31 # - This script is only interpreted by ksh93 and explicitly allows the
  32 #   use of ksh93 language extensions.
  33 
  34 
  35 # -----------------------------------------------------------------------------
  36 # Parameters you are likely to want to change
  37 # -----------------------------------------------------------------------------
  38 
  39 #       DEBUG build only (-D, -F)
  40 #       do not bringover from the parent (-n)
  41 #       runs 'make check' (-C)
  42 #       checks for new interfaces in libraries (-A)
  43 #       sends mail on completion (-m and the MAILTO variable)
  44 #       creates packages for PIT/RE (-p)
  45 #       checks for changes in ELF runpaths (-r)
  46 #       build and use this workspace's tools in $SRC/tools (-t)
  47 export NIGHTLY_OPTIONS='-FnCDAmprt'
  48 
  49 # Some scripts optionally send mail messages to MAILTO.
  50 #export MAILTO=
  51 
  52 # CODEMGR_WS - where is your workspace at
  53 export CODEMGR_WS="`git rev-parse --show-toplevel`"
  54 
  55 # Compilers may be specified using the following variables:
  56 # PRIMARY_CC    - primary C compiler
  57 # PRIMARY_CCC   - primary C++ compiler
  58 #
  59 # SHADOW_CCS    - list of shadow C compilers
  60 # SHADOW_CCCS   - list of shadow C++ compilers
  61 #
  62 # Each entry has the form <name>,<path to binary>,<style> where name is a
  63 # free-form name (possibly used in the makefiles to guard options), path is
  64 # the path to the executable.  style is the 'style' of command line taken by
  65 # the compiler, currently either gnu (or gcc) or sun (or cc), which is also
  66 # used by Makefiles to guard options.
  67 #
  68 # __SUNC and __GNUC must still be set to reflect the style of the primary
  69 # compiler (and to influence the default primary, otherwise)
  70 #
  71 # for example:
  72 # export PRIMARY_CC=gcc4,/opt/gcc/4.4.4/bin/gcc,gnu
  73 # export PRIMARY_CCC=gcc4,/opt/gcc/4.4.4/bin/g++,gnu
  74 # export SHADOW_CCS=studio12,/opt/SUNWspro/bin/cc,sun
  75 # export SHADOW_CCCS=studio12,/opt/SUNWspro/bin/CC,sun
  76 #
  77 # There can be several space-separated entries in SHADOW_* to run multiple
  78 # shadow compilers.
  79 #
  80 # To disable shadow compilation, unset SHADOW_* or set them to the empty string.
  81 #
  82 export GNUC_ROOT=/usr/gcc/7
  83 export PRIMARY_CC=gcc7,$GNUC_ROOT/bin/gcc,gnu
  84 export PRIMARY_CCC=gcc7,$GNUC_ROOT/bin/g++,gnu
  85 export SHADOW_CCS=gcc4,/opt/gcc/4.4.4/bin/gcc,gnu
  86 export SHADOW_CCCS=gcc4,/opt/gcc/4.4.4/bin/g++,gnu
  87 
  88 # comment to disable smatch
  89 export ENABLE_SMATCH=1
  90 
  91 # Comment this out to disable support for SMB printing, i.e. if you
  92 # don't want to bother providing the CUPS headers this needs.
  93 export ENABLE_SMB_PRINTING=
  94 
  95 # If your distro uses certain versions of Perl, make sure either Makefile.master
  96 # contains your new defaults OR your .env file sets them.
  97 # These are how you would override for building on OmniOS r151028, for example.
  98 #export PERL_VERSION=5.28
  99 #export PERL_VARIANT=-thread-multi
 100 #export PERL_PKGVERS=
 101 
 102 # To disable building of the 32-bit or 64-bit perl modules (or both),
 103 # uncomment these lines:
 104 #export BUILDPERL32='#'
 105 #export BUILDPERL64='#'
 106 
 107 # If your distro uses certain versions of Python, make sure either
 108 # Makefile.master contains your new defaults OR your .env file sets them.
 109 #export PYTHON_VERSION=2.7
 110 #export PYTHON_PKGVERS=-27
 111 #export PYTHON_SUFFIX=
 112 #export PYTHON3_VERSION=3.5
 113 #export PYTHON3_PKGVERS=-35
 114 #export PYTHON3_SUFFIX=m
 115 
 116 # To disable building with either Python2 or Python 3 (or both), uncomment
 117 # these lines:
 118 #export BUILDPY2='#'
 119 #export BUILDPY3='#'
 120 
 121 # Set console color scheme either by build type:
 122 #
 123 #export RELEASE_CONSOLE_COLOR="-DDEFAULT_ANSI_FOREGROUND=ANSI_COLOR_BLACK \
 124 #       -DDEFAULT_ANSI_BACKGROUND=ANSI_COLOR_WHITE"
 125 #
 126 #export DEBUG_CONSOLE_COLOR="-DDEFAULT_ANSI_FOREGROUND=ANSI_COLOR_RED \
 127 #       -DDEFAULT_ANSI_BACKGROUND=ANSI_COLOR_WHITE"
 128 #
 129 # or just one for any build type:
 130 #
 131 #export DEFAULT_CONSOLE_COLOR="-DDEFAULT_ANSI_FOREGROUND=ANSI_COLOR_BLACK \
 132 #       -DDEFAULT_ANSI_BACKGROUND=ANSI_COLOR_WHITE"
 133 
 134 # Set if your distribution has different package versioning
 135 #export PKGVERS_BRANCH=2018.0.0.17900
 136 
 137 # Skip Java 8 builds on distributions that don't support it
 138 #export BLD_JAVA_8=
 139 
 140 # POST_NIGHTLY can be any command to be run at the end of nightly.  See
 141 # nightly(1) for interactions between environment variables and this command.
 142 #POST_NIGHTLY=
 143 
 144 # Populates /etc/versions/build on each nightly run
 145 export BUILDVERSION_EXEC="git describe --all --long --dirty"
 146 
 147 # -----------------------------------------------------------------------------
 148 # You are less likely to need to modify parameters below.
 149 # -----------------------------------------------------------------------------
 150 
 151 # Maximum number of dmake jobs.  The recommended number is 2 + NCPUS,
 152 # where NCPUS is the number of logical CPUs on your build system.
 153 function maxjobs
 154 {
 155         nameref maxjobs=$1
 156         integer ncpu
 157         integer -r min_mem_per_job=512 # minimum amount of memory for a job
 158 
 159         ncpu=$(builtin getconf ; getconf 'NPROCESSORS_ONLN')
 160         (( maxjobs=ncpu + 2 ))
 161 
 162         # Throttle number of parallel jobs launched by dmake to a value which
 163         # gurantees that all jobs have enough memory. This was added to avoid
 164         # excessive paging/swapping in cases of virtual machine installations
 165         # which have lots of CPUs but not enough memory assigned to handle
 166         # that many parallel jobs
 167         if [[ $(/usr/sbin/prtconf 2>'/dev/null') == ~(E)Memory\ size:\ ([[:digit:]]+)\ Megabytes ]] ; then
 168                 integer max_jobs_per_memory # parallel jobs which fit into physical memory
 169                 integer physical_memory # physical memory installed
 170 
 171                 # The array ".sh.match" contains the contents of capturing
 172                 # brackets in the last regex, .sh.match[1] will contain
 173                 # the value matched by ([[:digit:]]+), i.e. the amount of
 174                 # memory installed
 175                 physical_memory="10#${.sh.match[1]}"
 176 
 177                 ((
 178                         max_jobs_per_memory=round(physical_memory/min_mem_per_job) ,
 179                         maxjobs=fmax(2, fmin(maxjobs, max_jobs_per_memory))
 180                 ))
 181         fi
 182 
 183         return 0
 184 }
 185 
 186 maxjobs DMAKE_MAX_JOBS # "DMAKE_MAX_JOBS" passed as ksh(1) name reference
 187 export DMAKE_MAX_JOBS
 188 
 189 # path to onbld tool binaries
 190 ONBLD_BIN='/opt/onbld/bin'
 191 
 192 # PARENT_WS is used to determine the parent of this workspace. This is
 193 # for the options that deal with the parent workspace (such as where the
 194 # proto area will go).
 195 export PARENT_WS=''
 196 
 197 # CLONE_WS is the workspace nightly should do a bringover from.
 198 # The bringover, if any, is done as STAFFER.
 199 export CLONE_WS='ssh://anonhg@hg.illumos.org/illumos-gate'
 200 
 201 # Set STAFFER to your own login as gatekeeper or developer
 202 # The point is to use group "staff" and avoid referencing the parent
 203 # workspace as root.
 204 export STAFFER="$LOGNAME"
 205 export MAILTO="${MAILTO:-$STAFFER}"
 206 
 207 # If you wish the mail messages to be From: an arbitrary address, export
 208 # MAILFROM.
 209 #export MAILFROM="user@example.com"
 210 
 211 # The project (see project(4)) under which to run this build.  If not
 212 # specified, the build is simply run in a new task in the current project.
 213 export BUILD_PROJECT=''
 214 
 215 # You should not need to change the next three lines
 216 export ATLOG="$CODEMGR_WS/log"
 217 export LOGFILE="$ATLOG/nightly.log"
 218 export MACH="$(uname -p)"
 219 
 220 #
 221 #  The following macro points to the closed binaries.  Once illumos has
 222 #  totally freed itself, we can remove this reference.
 223 #
 224 # Location of encumbered binaries.
 225 export ON_CLOSED_BINS="$CODEMGR_WS/closed"
 226 
 227 # REF_PROTO_LIST - for comparing the list of stuff in your proto area
 228 # with. Generally this should be left alone, since you want to see differences
 229 # from your parent (the gate).
 230 #
 231 export REF_PROTO_LIST="$PARENT_WS/usr/src/proto_list_${MACH}"
 232 
 233 
 234 export ROOT="$CODEMGR_WS/proto/root_${MACH}"
 235 export SRC="$CODEMGR_WS/usr/src"
 236 export MULTI_PROTO="no"
 237 
 238 #
 239 #       build environment variables, including version info for mcs, motd,
 240 # motd, uname and boot messages. Mostly you shouldn't change this except
 241 # when the release slips (nah) or you move an environment file to a new
 242 # release
 243 #
 244 export VERSION="`git describe --long --all HEAD | cut -d/ -f2-`"
 245 
 246 #
 247 # the RELEASE and RELEASE_DATE variables are set in Makefile.master;
 248 # there might be special reasons to override them here, but that
 249 # should not be the case in general
 250 #
 251 # export RELEASE='5.11'
 252 # export RELEASE_DATE='October 2007'
 253 
 254 # proto area in parent for optionally depositing a copy of headers and
 255 # libraries corresponding to the protolibs target
 256 # not applicable given the NIGHTLY_OPTIONS
 257 #
 258 export PARENT_ROOT="$PARENT_WS/proto/root_$MACH"
 259 export PARENT_TOOLS_ROOT="$PARENT_WS/usr/src/tools/proto/root_$MACH-nd"
 260 
 261 # Package creation variables.  You probably shouldn't change these,
 262 # either.
 263 #
 264 # PKGARCHIVE determines where the repository will be created.
 265 #
 266 # PKGPUBLISHER_REDIST controls the publisher setting for the repository.
 267 #
 268 export PKGARCHIVE="${CODEMGR_WS}/packages/${MACH}/nightly"
 269 # export PKGPUBLISHER_REDIST='on-redist'
 270 
 271 # Package manifest format version.
 272 export PKGFMT_OUTPUT='v1'
 273 
 274 # we want make to do as much as it can, just in case there's more than
 275 # one problem.
 276 export MAKEFLAGS='k'
 277 
 278 # Magic variables to prevent the devpro compilers/teamware from checking
 279 # for updates or sending mail back to devpro on every use.
 280 export SUNW_NO_UPDATE_NOTIFY='1'
 281 export UT_NO_USAGE_TRACKING='1'
 282 
 283 # Build tools - don't change these unless you know what you're doing.  These
 284 # variables allows you to get the compilers and onbld files locally.
 285 # Set BUILD_TOOLS to pull everything from one location.
 286 # Alternately, you can set ONBLD_TOOLS to where you keep the contents of
 287 # SUNWonbld and SPRO_ROOT to where you keep the compilers.  SPRO_VROOT
 288 # exists to make it easier to test new versions of the compiler.
 289 export BUILD_TOOLS='/opt'
 290 #export ONBLD_TOOLS='/opt/onbld'
 291 export SPRO_ROOT='/opt/SUNWspro'
 292 export SPRO_VROOT="$SPRO_ROOT"
 293 
 294 # Set this flag to 'n' to disable the use of 'checkpaths'.  The default,
 295 # if the 'N' option is not specified, is to run this test.
 296 #CHECK_PATHS='y'
 297 
 298 if [[ "$ENABLE_SMATCH" = "1" ]]; then
 299         SMATCHBIN=$CODEMGR_WS/usr/src/tools/proto/root_$MACH-nd/opt/onbld/bin/$MACH/smatch
 300         export SHADOW_CCS="$SHADOW_CCS smatch,$SMATCHBIN,smatch"
 301 fi