1 # 2 # CDDL HEADER START 3 # 4 # The contents of this file are subject to the terms of the 5 # Common Development and Distribution License (the "License"). 6 # You may not use this file except in compliance with the License. 7 # 8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 # or http://www.opensolaris.org/os/licensing. 10 # See the License for the specific language governing permissions 11 # and limitations under the License. 12 # 13 # When distributing Covered Code, include this CDDL HEADER in each 14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 # If applicable, add the following below this CDDL HEADER, with the 16 # fields enclosed by brackets "[]" replaced with your own identifying 17 # information: Portions Copyright [yyyy] [name of copyright owner] 18 # 19 # CDDL HEADER END 20 # 21 22 # 23 # Copyright (c) 1991, 2010, Oracle and/or its affiliates. All rights reserved. 24 # Copyright (c) 2011 Bayard G. Bell. All rights reserved. 25 # Copyright (c) 2011 by Delphix. All rights reserved. 26 # Copyright (c) 2013 Andrew Stormont. All rights reserved. 27 # Copyright 2016 Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org> 28 # Copyright (c) 2019, Joyent, Inc. 29 # 30 31 # 32 # This Makefile contains the common targets and definitions for 33 # all kernels. It is to be included in the Makefiles for specific 34 # implementation architectures and processor architecture dependent 35 # modules: i.e.: all driving kernel Makefiles. 36 # 37 # Include global definitions: 38 # 39 include $(SRC)/Makefile.master 40 41 # 42 # No text domain in the kernel. 43 # 44 DTEXTDOM = 45 46 # 47 # Keep references to $(SRC)/common relative. 48 COMMONBASE= $(UTSBASE)/../common 49 50 # 51 # Setup build-specific vars 52 # To add a build type: 53 # add name to ALL_BUILDS32 & ALL_BUILDS64 54 # set CLASS_name and OBJ_DIR_name 55 # add targets to Makefile.targ 56 # 57 58 # 59 # DEF_BUILDS is for def, lint, sischeck, and install 60 # ALL_BUILDS is for everything else (all, clean, ...) 61 # 62 # The NOT_RELEASE_BUILD noise is to maintain compatibility with the 63 # gatekeeper's nightly build script. 64 # 65 DEF_BUILDS32 = obj32 66 DEF_BUILDS64 = obj64 67 DEF_BUILDSONLY64 = obj64 68 $(NOT_RELEASE_BUILD)DEF_BUILDS32 = debug32 69 $(NOT_RELEASE_BUILD)DEF_BUILDS64 = debug64 70 $(NOT_RELEASE_BUILD)DEF_BUILDSONLY64 = debug64 71 ALL_BUILDS32 = obj32 debug32 72 ALL_BUILDS64 = obj64 debug64 73 ALL_BUILDSONLY64 = obj64 debug64 74 75 # 76 # For modules in 64b dirs that aren't built 64b 77 # or modules in 64b dirs that aren't built 32b we 78 # need to create empty modlintlib files so global lint works 79 # 80 LINT32_BUILDS = debug32 81 LINT64_BUILDS = debug64 82 83 # 84 # Build class (32b or 64b) 85 # 86 CLASS_OBJ32 = 32 87 CLASS_DBG32 = 32 88 CLASS_OBJ64 = 64 89 CLASS_DBG64 = 64 90 CLASS = $(CLASS_$(BUILD_TYPE)) 91 92 # 93 # Build subdirectory 94 # 95 OBJS_DIR_OBJ32 = obj32 96 OBJS_DIR_DBG32 = debug32 97 OBJS_DIR_OBJ64 = obj64 98 OBJS_DIR_DBG64 = debug64 99 OBJS_DIR = $(OBJS_DIR_$(BUILD_TYPE)) 100 101 # 102 # Create defaults so empty rules don't 103 # confuse make 104 # 105 CLASS_ = 64 106 OBJS_DIR_ = debug64 107 108 # 109 # Build tools 110 # 111 CC_sparc_32 = $(sparc_CC) 112 CC_sparc_64 = $(sparcv9_CC) 113 114 CC_i386_32 = $(i386_CC) 115 CC_i386_64 = $(amd64_CC) 116 CC_amd64_64 = $(amd64_CC) 117 118 CC = $(CC_$(MACH)_$(CLASS)) 119 120 AS_sparc_32 = $(sparc_AS) 121 AS_sparc_64 = $(sparcv9_AS) 122 123 AS_i386_32 = $(i386_AS) 124 AS_i386_64 = $(amd64_AS) 125 AS_amd64_64 = $(amd64_AS) 126 127 AS = $(AS_$(MACH)_$(CLASS)) 128 129 LD_sparc_32 = $(sparc_LD) 130 LD_sparc_64 = $(sparcv9_LD) 131 132 LD_i386_32 = $(i386_LD) 133 LD_i386_64 = $(amd64_LD) 134 LD_amd64_64 = $(amd64_LD) 135 136 LD = $(LD_$(MACH)_$(CLASS)) 137 138 LINT_sparc_32 = $(sparc_LINT) 139 LINT_sparc_64 = $(sparcv9_LINT) 140 141 LINT_i386_32 = $(i386_LINT) 142 LINT_i386_64 = $(amd64_LINT) 143 LINT_amd64_64 = $(amd64_LINT) 144 145 LINT = $(LINT_$(MACH)_$(CLASS)) 146 147 MODEL_32 = ilp32 148 MODEL_64 = lp64 149 MODEL = $(MODEL_$(CLASS)) 150 151 # 152 # Build rules for linting the kernel. 153 # 154 LHEAD = $(ECHO) "\n$@"; 155 156 # Note: egrep returns "failure" if there are no matches, which is 157 # exactly the opposite of what we need. 158 LGREP.2 = if egrep -v ' (_init|_fini|_info) '; then false; else true; fi 159 160 LTAIL = 161 162 LINT.c = $(LINT) -c -dirout=$(LINTS_DIR) $(LINTFLAGS) $(LINT_DEFS) $(CPPFLAGS) 163 164 # Please do not add new erroff directives here. If you need to disable 165 # lint warnings in your module for things that cannot be fixed in any 166 # reasonable manner, please augment LINTTAGS in your module Makefile 167 # instead. 168 LINTTAGS = -erroff=E_INCONS_ARG_DECL2 169 LINTTAGS += -erroff=E_INCONS_VAL_TYPE_DECL2 170 171 LINTFLAGS_sparc_32 = $(LINTCCMODE) -nsxmuF -errtags=yes 172 LINTFLAGS_sparc_64 = $(LINTFLAGS_sparc_32) -m64 173 LINTFLAGS_i386_32 = $(LINTCCMODE) -nsxmuF -errtags=yes 174 LINTFLAGS_i386_64 = $(LINTFLAGS_i386_32) -m64 175 176 LINTFLAGS = $(LINTFLAGS_$(MACH)_$(CLASS)) $(LINTTAGS) 177 LINTFLAGS += $(C99LMODE) 178 179 # 180 # Override this variable to modify the name of the lint target. 181 # 182 LINT_MODULE= $(MODULE) 183 184 # 185 # Build the compile/assemble lines: 186 # 187 EXTRA_OPTIONS = 188 AS_DEFS = -D_ASM -D__STDC__=0 189 190 ALWAYS_DEFS_32 = -D_KERNEL -D_SYSCALL32 -D_DDI_STRICT 191 ALWAYS_DEFS_64 = -D_KERNEL -D_SYSCALL32 -D_SYSCALL32_IMPL -D_ELF64 \ 192 -D_DDI_STRICT 193 # 194 # XX64 This should be defined by the compiler! 195 # 196 ALWAYS_DEFS_64 += -Dsun -D__sun -D__SVR4 197 ALWAYS_DEFS = $(ALWAYS_DEFS_$(CLASS)) 198 199 # 200 # CPPFLAGS is deliberatly set with a "=" and not a "+=". For the kernel 201 # the header include path should not look for header files outside of 202 # the kernel code. This "=" removes the search path built in 203 # Makefile.master inside CPPFLAGS. Ditto for AS_CPPFLAGS. 204 # 205 CPPFLAGS = $(ALWAYS_DEFS) $(ALL_DEFS) $(CONFIG_DEFS) \ 206 $(INCLUDE_PATH) $(EXTRA_OPTIONS) 207 ASFLAGS += -P 208 AS_CPPFLAGS = $(ALWAYS_DEFS) $(ALL_DEFS) $(CONFIG_DEFS) $(AS_DEFS) \ 209 $(AS_INC_PATH) $(EXTRA_OPTIONS) 210 211 # 212 # Make it (relatively) easy to share compilation options between 213 # all kernel implementations. 214 # 215 216 # Override the default, the kernel is squeaky clean 217 CERRWARN = -errtags=yes -errwarn=%all 218 219 CERRWARN += -_gcc=-Wno-missing-braces 220 CERRWARN += -_gcc=-Wno-sign-compare 221 CERRWARN += -_gcc=-Wno-unknown-pragmas 222 CERRWARN += -_gcc=-Wno-unused-parameter 223 CERRWARN += -_gcc=-Wno-missing-field-initializers 224 225 # DEBUG v. -nd make for frequent unused variables, empty conditions, etc. in 226 # -nd builds 227 $(RELEASE_BUILD)CERRWARN += -_gcc=-Wno-unused 228 $(RELEASE_BUILD)CERRWARN += -_gcc=-Wno-empty-body 229 230 CERRWARN += -_smatch=-p=illumos_kernel 231 include $(SRC)/Makefile.smatch 232 233 # 234 # Unfortunately, _IOWR() is regularly used with a third argument of 0, 235 # so we have to disable all these smatch checks. 236 # 237 SMOFF += sizeof 238 239 # 240 # DEBUG-only macros that define away to nothing confuse this check, 241 # unfortunately. 242 # 243 $(RELEASE_BUILD)SMOFF += indenting 244 245 CSTD = $(CSTD_GNU99) 246 247 CFLAGS_uts = 248 CFLAGS_uts += $(STAND_FLAGS_$(CLASS)) 249 CFLAGS_uts += $(CCVERBOSE) 250 CFLAGS_uts += $(ILDOFF) 251 CFLAGS_uts += $(XAOPT) 252 CFLAGS_uts += $(CTF_FLAGS_$(CLASS)) 253 CFLAGS_uts += $(CERRWARN) 254 CFLAGS_uts += $(CCNOAUTOINLINE) 255 CFLAGS_uts += $(CCNOREORDER) 256 CFLAGS_uts += $(CCNOAGGRESSIVELOOPS) 257 CFLAGS_uts += $(CGLOBALSTATIC) 258 CFLAGS_uts += $(EXTRA_CFLAGS) 259 CFLAGS_uts += $(CSOURCEDEBUGFLAGS) 260 CFLAGS_uts += $(CUSERFLAGS) 261 262 # 263 # Declare that $(OBJECTS) and $(LINTS) can be compiled in parallel. 264 # The DUMMY target is for those instances where OBJECTS and LINTS 265 # are empty (to avoid an unconditional .PARALLEL). 266 .PARALLEL: $(OBJECTS) $(LINTS) DUMMY 267 268 # 269 # Expanded dependencies 270 # 271 DEF_DEPS = $(DEF_BUILDS:%=def.%) 272 ALL_DEPS = $(ALL_BUILDS:%=all.%) 273 CLEAN_DEPS = $(ALL_BUILDS:%=clean.%) 274 CLOBBER_DEPS = $(ALL_BUILDS:%=clobber.%) 275 LINT_DEPS = $(DEF_BUILDS:%=lint.%) 276 MODLINTLIB_DEPS = $(DEF_BUILDS:%=modlintlib.%) 277 MODLIST_DEPS = $(DEF_BUILDS:%=modlist.%) 278 CLEAN_LINT_DEPS = $(ALL_BUILDS:%=clean.lint.%) 279 INSTALL_DEPS = $(DEF_BUILDS:%=install.%) 280 SYM_DEPS = $(SYM_BUILDS:%=symcheck.%) 281 SISCHECK_DEPS = $(DEF_BUILDS:%=sischeck.%) 282 SISCLEAN_DEPS = $(ALL_BUILDS:%=sisclean.%) 283 284 # 285 # Default module name 286 # 287 BINARY = $(OBJS_DIR)/$(MODULE) 288 289 # 290 # Default cleanup definitions 291 # 292 CLEANLINTFILES = $(LINTS) $(MOD_LINT_LIB) 293 CLEANFILES = $(OBJECTS) $(CLEANLINTFILES) 294 CLOBBERFILES = $(BINARY) $(CLEANFILES) 295 296 # 297 # Installation constants: 298 # 299 # FILEMODE is the mode given to the kernel modules 300 # CFILEMODE is the mode given to the '.conf' files 301 # 302 FILEMODE = 755 303 DIRMODE = 755 304 CFILEMODE = 644 305 306 # 307 # Special Installation Macros for the installation of '.conf' files. 308 # 309 # These are unique because they are not installed from the current 310 # working directory. 311 # 312 # Sigh. Apparently at some time in the past there was a confusion on 313 # whether the name is SRC_CONFFILE or SRC_CONFILE. Consistency with the 314 # other names would indicate SRC_CONFFILE, but the voting is >180 Makefiles 315 # with SRC_CONFILE and about 11 with SRC_CONFFILE. Software development 316 # isn't a popularity contest, though, and so my inclination is to define 317 # both names for now and incrementally convert to SRC_CONFFILE to be consistent 318 # with the other names. 319 # 320 CONFFILE = $(MODULE).conf 321 SRC_CONFFILE = $(CONF_SRCDIR)/$(CONFFILE) 322 SRC_CONFILE = $(SRC_CONFFILE) 323 ROOT_CONFFILE_32 = $(ROOTMODULE).conf 324 ROOT_CONFFILE_64 = $(ROOTMODULE:%/$(SUBDIR64)/$(MODULE)=%/$(MODULE)).conf 325 ROOT_CONFFILE = $(ROOT_CONFFILE_$(CLASS)) 326 327 328 INS.conffile= \ 329 $(RM) $@; $(INS) -s -m $(CFILEMODE) -f $(@D) $(SRC_CONFFILE) 330 331 # 332 # The CTF merge of child kernel modules is performed against one of the genunix 333 # modules. For Intel builds, all modules will be used with a single genunix: 334 # the one built in intel/genunix. For SPARC builds, a given 335 # module may be 336 # used with one of a number of genunix files, depending on what platform the 337 # module is deployed on. We merge against the sun4u genunix to optimize for 338 # the common case. We also merge against the ip driver since networking is 339 # typically loaded and types defined therein are shared between many modules. 340 # 341 CTFMERGE_GUDIR_sparc = sun4u 342 CTFMERGE_GUDIR_i386 = intel 343 CTFMERGE_GUDIR = $(CTFMERGE_GUDIR_$(MACH)) 344 345 CTFMERGE_GENUNIX = \ 346 $(UTSBASE)/$(CTFMERGE_GUDIR)/genunix/$(OBJS_DIR)/genunix 347 348 # 349 # Used to uniquify a non-genunix module against genunix. $VERSION is used 350 # for the label. 351 # 352 # For the ease of developers dropping modules onto possibly unrelated systems, 353 # you can set NO_GENUNIX_UNIQUIFY= in the environment to skip uniquifying 354 # against genunix. 355 # 356 NO_GENUNIX_UNIQUIFY=$(POUND_SIGN) 357 CTFMERGE_GENUNIX_DFLAG=-d $(CTFMERGE_GENUNIX) 358 $(NO_GENUNIX_UNIQUIFY)CTF_GENUNIX_DFLAG= 359 360 CTFMERGE_UNIQUIFY_AGAINST_GENUNIX = \ 361 $(CTFMERGE) $(CTFMRGFLAGS) -L VERSION \ 362 $(CTFMERGE_GENUNIX_DFLAG) -o $@ $(OBJECTS) $(CTFEXTRAOBJS) 363 364 # 365 # Used to merge the genunix module. 366 # 367 CTFMERGE_GENUNIX_MERGE = \ 368 $(CTFMERGE) $(CTFMRGFLAGS) -L VERSION -o $@ \ 369 $(OBJECTS) $(CTFEXTRAOBJS) $(IPCTF_TARGET) 370 371 # 372 # We ctfmerge the ip objects into genunix to maximize the number of common types 373 # found there, thus maximizing the effectiveness of uniquification. We don't 374 # want the genunix build to have to know about the individual ip objects, so we 375 # put them in an archive. The genunix ctfmerge then includes this archive. 376 # 377 IPCTF = $(IPDRV_DIR)/$(OBJS_DIR)/ipctf.a 378 379 # 380 # Rule for building fake shared libraries used for symbol resolution 381 # when building other modules. -znoreloc is needed here to avoid 382 # tripping over code that isn't really suitable for shared libraries. 383 # 384 BUILD.SO = \ 385 $(LD) -o $@ $(GSHARED) $(ZNORELOC) -h $(SONAME) 386 387 # 388 # SONAME defaults for common fake shared libraries. 389 # 390 $(LIBGEN) := SONAME = $(MODULE) 391 $(PLATLIB) := SONAME = misc/platmod 392 $(CPULIB) := SONAME = 'cpu/$$CPU' 393 $(DTRACESTUBS) := SONAME = dtracestubs 394 395 # 396 # Installation directories 397 # 398 399 # 400 # For now, 64b modules install into a subdirectory 401 # of their 32b brethren. 402 # 403 SUBDIR64_sparc = sparcv9 404 SUBDIR64_i386 = amd64 405 SUBDIR64 = $(SUBDIR64_$(MACH)) 406 407 ROOT_MOD_DIR = $(ROOT)/kernel 408 409 ROOT_KERN_DIR_32 = $(ROOT_MOD_DIR) 410 ROOT_BRAND_DIR_32 = $(ROOT_MOD_DIR)/brand 411 ROOT_DRV_DIR_32 = $(ROOT_MOD_DIR)/drv 412 ROOT_DTRACE_DIR_32 = $(ROOT_MOD_DIR)/dtrace 413 ROOT_EXEC_DIR_32 = $(ROOT_MOD_DIR)/exec 414 ROOT_FS_DIR_32 = $(ROOT_MOD_DIR)/fs 415 ROOT_SCHED_DIR_32 = $(ROOT_MOD_DIR)/sched 416 ROOT_SOCK_DIR_32 = $(ROOT_MOD_DIR)/socketmod 417 ROOT_STRMOD_DIR_32 = $(ROOT_MOD_DIR)/strmod 418 ROOT_IPP_DIR_32 = $(ROOT_MOD_DIR)/ipp 419 ROOT_SYS_DIR_32 = $(ROOT_MOD_DIR)/sys 420 ROOT_MISC_DIR_32 = $(ROOT_MOD_DIR)/misc 421 ROOT_KGSS_DIR_32 = $(ROOT_MOD_DIR)/misc/kgss 422 ROOT_SCSI_VHCI_DIR_32 = $(ROOT_MOD_DIR)/misc/scsi_vhci 423 ROOT_PMCS_FW_DIR_32 = $(ROOT_MOD_DIR)/misc/pmcs 424 ROOT_QLC_FW_DIR_32 = $(ROOT_MOD_DIR)/misc/qlc 425 ROOT_EMLXS_FW_DIR_32 = $(ROOT_MOD_DIR)/misc/emlxs 426 ROOT_NLMISC_DIR_32 = $(ROOT_MOD_DIR)/misc 427 ROOT_MACH_DIR_32 = $(ROOT_MOD_DIR)/mach 428 ROOT_CPU_DIR_32 = $(ROOT_MOD_DIR)/cpu 429 ROOT_TOD_DIR_32 = $(ROOT_MOD_DIR)/tod 430 ROOT_FONT_DIR_32 = $(ROOT_MOD_DIR)/fonts 431 ROOT_DACF_DIR_32 = $(ROOT_MOD_DIR)/dacf 432 ROOT_CRYPTO_DIR_32 = $(ROOT_MOD_DIR)/crypto 433 ROOT_MAC_DIR_32 = $(ROOT_MOD_DIR)/mac 434 ROOT_KICONV_DIR_32 = $(ROOT_MOD_DIR)/kiconv 435 436 ROOT_KERN_DIR_64 = $(ROOT_MOD_DIR)/$(SUBDIR64) 437 ROOT_BRAND_DIR_64 = $(ROOT_MOD_DIR)/brand/$(SUBDIR64) 438 ROOT_DRV_DIR_64 = $(ROOT_MOD_DIR)/drv/$(SUBDIR64) 439 ROOT_DTRACE_DIR_64 = $(ROOT_MOD_DIR)/dtrace/$(SUBDIR64) 440 ROOT_EXEC_DIR_64 = $(ROOT_MOD_DIR)/exec/$(SUBDIR64) 441 ROOT_FS_DIR_64 = $(ROOT_MOD_DIR)/fs/$(SUBDIR64) 442 ROOT_SCHED_DIR_64 = $(ROOT_MOD_DIR)/sched/$(SUBDIR64) 443 ROOT_SOCK_DIR_64 = $(ROOT_MOD_DIR)/socketmod/$(SUBDIR64) 444 ROOT_STRMOD_DIR_64 = $(ROOT_MOD_DIR)/strmod/$(SUBDIR64) 445 ROOT_IPP_DIR_64 = $(ROOT_MOD_DIR)/ipp/$(SUBDIR64) 446 ROOT_SYS_DIR_64 = $(ROOT_MOD_DIR)/sys/$(SUBDIR64) 447 ROOT_MISC_DIR_64 = $(ROOT_MOD_DIR)/misc/$(SUBDIR64) 448 ROOT_KGSS_DIR_64 = $(ROOT_MOD_DIR)/misc/kgss/$(SUBDIR64) 449 ROOT_SCSI_VHCI_DIR_64 = $(ROOT_MOD_DIR)/misc/scsi_vhci/$(SUBDIR64) 450 ROOT_PMCS_FW_DIR_64 = $(ROOT_MOD_DIR)/misc/pmcs/$(SUBDIR64) 451 ROOT_QLC_FW_DIR_64 = $(ROOT_MOD_DIR)/misc/qlc/$(SUBDIR64) 452 ROOT_EMLXS_FW_DIR_64 = $(ROOT_MOD_DIR)/misc/emlxs/$(SUBDIR64) 453 ROOT_NLMISC_DIR_64 = $(ROOT_MOD_DIR)/misc/$(SUBDIR64) 454 ROOT_MACH_DIR_64 = $(ROOT_MOD_DIR)/mach/$(SUBDIR64) 455 ROOT_CPU_DIR_64 = $(ROOT_MOD_DIR)/cpu/$(SUBDIR64) 456 ROOT_TOD_DIR_64 = $(ROOT_MOD_DIR)/tod/$(SUBDIR64) 457 ROOT_FONT_DIR_64 = $(ROOT_MOD_DIR)/fonts/$(SUBDIR64) 458 ROOT_DACF_DIR_64 = $(ROOT_MOD_DIR)/dacf/$(SUBDIR64) 459 ROOT_CRYPTO_DIR_64 = $(ROOT_MOD_DIR)/crypto/$(SUBDIR64) 460 ROOT_MAC_DIR_64 = $(ROOT_MOD_DIR)/mac/$(SUBDIR64) 461 ROOT_KICONV_DIR_64 = $(ROOT_MOD_DIR)/kiconv/$(SUBDIR64) 462 463 ROOT_KERN_DIR = $(ROOT_KERN_DIR_$(CLASS)) 464 ROOT_BRAND_DIR = $(ROOT_BRAND_DIR_$(CLASS)) 465 ROOT_DRV_DIR = $(ROOT_DRV_DIR_$(CLASS)) 466 ROOT_DTRACE_DIR = $(ROOT_DTRACE_DIR_$(CLASS)) 467 ROOT_EXEC_DIR = $(ROOT_EXEC_DIR_$(CLASS)) 468 ROOT_FS_DIR = $(ROOT_FS_DIR_$(CLASS)) 469 ROOT_SCHED_DIR = $(ROOT_SCHED_DIR_$(CLASS)) 470 ROOT_SOCK_DIR = $(ROOT_SOCK_DIR_$(CLASS)) 471 ROOT_STRMOD_DIR = $(ROOT_STRMOD_DIR_$(CLASS)) 472 ROOT_IPP_DIR = $(ROOT_IPP_DIR_$(CLASS)) 473 ROOT_SYS_DIR = $(ROOT_SYS_DIR_$(CLASS)) 474 ROOT_MISC_DIR = $(ROOT_MISC_DIR_$(CLASS)) 475 ROOT_KGSS_DIR = $(ROOT_KGSS_DIR_$(CLASS)) 476 ROOT_SCSI_VHCI_DIR = $(ROOT_SCSI_VHCI_DIR_$(CLASS)) 477 ROOT_PMCS_FW_DIR = $(ROOT_PMCS_FW_DIR_$(CLASS)) 478 ROOT_QLC_FW_DIR = $(ROOT_QLC_FW_DIR_$(CLASS)) 479 ROOT_EMLXS_FW_DIR = $(ROOT_EMLXS_FW_DIR_$(CLASS)) 480 ROOT_NLMISC_DIR = $(ROOT_NLMISC_DIR_$(CLASS)) 481 ROOT_MACH_DIR = $(ROOT_MACH_DIR_$(CLASS)) 482 ROOT_CPU_DIR = $(ROOT_CPU_DIR_$(CLASS)) 483 ROOT_TOD_DIR = $(ROOT_TOD_DIR_$(CLASS)) 484 ROOT_FONT_DIR = $(ROOT_FONT_DIR_$(CLASS)) 485 ROOT_DACF_DIR = $(ROOT_DACF_DIR_$(CLASS)) 486 ROOT_CRYPTO_DIR = $(ROOT_CRYPTO_DIR_$(CLASS)) 487 ROOT_MAC_DIR = $(ROOT_MAC_DIR_$(CLASS)) 488 ROOT_KICONV_DIR = $(ROOT_KICONV_DIR_$(CLASS)) 489 ROOT_FIRMWARE_DIR = $(ROOT_MOD_DIR)/firmware 490 491 ROOT_MOD_DIRS_32 = $(ROOT_BRAND_DIR_32) $(ROOT_DRV_DIR_32) 492 ROOT_MOD_DIRS_32 = $(ROOT_BRAND_DIR_32) $(ROOT_DRV_DIR_32) 493 ROOT_MOD_DIRS_32 += $(ROOT_EXEC_DIR_32) $(ROOT_DTRACE_DIR_32) 494 ROOT_MOD_DIRS_32 += $(ROOT_FS_DIR_32) $(ROOT_SCHED_DIR_32) 495 ROOT_MOD_DIRS_32 += $(ROOT_STRMOD_DIR_32) $(ROOT_SYS_DIR_32) 496 ROOT_MOD_DIRS_32 += $(ROOT_IPP_DIR_32) $(ROOT_SOCK_DIR_32) 497 ROOT_MOD_DIRS_32 += $(ROOT_MISC_DIR_32) $(ROOT_MACH_DIR_32) 498 ROOT_MOD_DIRS_32 += $(ROOT_KGSS_DIR_32) 499 ROOT_MOD_DIRS_32 += $(ROOT_SCSI_VHCI_DIR_32) 500 ROOT_MOD_DIRS_32 += $(ROOT_PMCS_FW_DIR_32) 501 ROOT_MOD_DIRS_32 += $(ROOT_QLC_FW_DIR_32) 502 ROOT_MOD_DIRS_32 += $(ROOT_EMLXS_FW_DIR_32) 503 ROOT_MOD_DIRS_32 += $(ROOT_CPU_DIR_32) $(ROOT_FONT_DIR_32) 504 ROOT_MOD_DIRS_32 += $(ROOT_TOD_DIR_32) $(ROOT_DACF_DIR_32) 505 ROOT_MOD_DIRS_32 += $(ROOT_CRYPTO_DIR_32) $(ROOT_MAC_DIR_32) 506 ROOT_MOD_DIRS_32 += $(ROOT_KICONV_DIR_32) 507 ROOT_MOD_DIRS_32 += $(ROOT_FIRMWARE_DIR) 508 509 USR_MOD_DIR = $(ROOT)/usr/kernel 510 511 USR_DRV_DIR_32 = $(USR_MOD_DIR)/drv 512 USR_EXEC_DIR_32 = $(USR_MOD_DIR)/exec 513 USR_FS_DIR_32 = $(USR_MOD_DIR)/fs 514 USR_SCHED_DIR_32 = $(USR_MOD_DIR)/sched 515 USR_SOCK_DIR_32 = $(USR_MOD_DIR)/socketmod 516 USR_STRMOD_DIR_32 = $(USR_MOD_DIR)/strmod 517 USR_SYS_DIR_32 = $(USR_MOD_DIR)/sys 518 USR_MISC_DIR_32 = $(USR_MOD_DIR)/misc 519 USR_DACF_DIR_32 = $(USR_MOD_DIR)/dacf 520 USR_PCBE_DIR_32 = $(USR_MOD_DIR)/pcbe 521 USR_DTRACE_DIR_32 = $(USR_MOD_DIR)/dtrace 522 USR_BRAND_DIR_32 = $(USR_MOD_DIR)/brand 523 524 USR_DRV_DIR_64 = $(USR_MOD_DIR)/drv/$(SUBDIR64) 525 USR_EXEC_DIR_64 = $(USR_MOD_DIR)/exec/$(SUBDIR64) 526 USR_FS_DIR_64 = $(USR_MOD_DIR)/fs/$(SUBDIR64) 527 USR_SCHED_DIR_64 = $(USR_MOD_DIR)/sched/$(SUBDIR64) 528 USR_SOCK_DIR_64 = $(USR_MOD_DIR)/socketmod/$(SUBDIR64) 529 USR_STRMOD_DIR_64 = $(USR_MOD_DIR)/strmod/$(SUBDIR64) 530 USR_SYS_DIR_64 = $(USR_MOD_DIR)/sys/$(SUBDIR64) 531 USR_MISC_DIR_64 = $(USR_MOD_DIR)/misc/$(SUBDIR64) 532 USR_DACF_DIR_64 = $(USR_MOD_DIR)/dacf/$(SUBDIR64) 533 USR_PCBE_DIR_64 = $(USR_MOD_DIR)/pcbe/$(SUBDIR64) 534 USR_DTRACE_DIR_64 = $(USR_MOD_DIR)/dtrace/$(SUBDIR64) 535 USR_BRAND_DIR_64 = $(USR_MOD_DIR)/brand/$(SUBDIR64) 536 537 USR_DRV_DIR = $(USR_DRV_DIR_$(CLASS)) 538 USR_EXEC_DIR = $(USR_EXEC_DIR_$(CLASS)) 539 USR_FS_DIR = $(USR_FS_DIR_$(CLASS)) 540 USR_SCHED_DIR = $(USR_SCHED_DIR_$(CLASS)) 541 USR_SOCK_DIR = $(USR_SOCK_DIR_$(CLASS)) 542 USR_STRMOD_DIR = $(USR_STRMOD_DIR_$(CLASS)) 543 USR_SYS_DIR = $(USR_SYS_DIR_$(CLASS)) 544 USR_MISC_DIR = $(USR_MISC_DIR_$(CLASS)) 545 USR_DACF_DIR = $(USR_DACF_DIR_$(CLASS)) 546 USR_PCBE_DIR = $(USR_PCBE_DIR_$(CLASS)) 547 USR_DTRACE_DIR = $(USR_DTRACE_DIR_$(CLASS)) 548 USR_BRAND_DIR = $(USR_BRAND_DIR_$(CLASS)) 549 550 USR_MOD_DIRS_32 = $(USR_DRV_DIR_32) $(USR_EXEC_DIR_32) 551 USR_MOD_DIRS_32 += $(USR_FS_DIR_32) $(USR_SCHED_DIR_32) 552 USR_MOD_DIRS_32 += $(USR_STRMOD_DIR_32) $(USR_SYS_DIR_32) 553 USR_MOD_DIRS_32 += $(USR_MISC_DIR_32) $(USR_DACF_DIR_32) 554 USR_MOD_DIRS_32 += $(USR_PCBE_DIR_32) 555 USR_MOD_DIRS_32 += $(USR_DTRACE_DIR_32) $(USR_BRAND_DIR_32) 556 USR_MOD_DIRS_32 += $(USR_SOCK_DIR_32) 557 558 # 559 # 560 # 561 include $(SRC)/Makefile.psm 562 563 # 564 # The "-r" on the remove may be considered temporary, but is required 565 # while the replacement of the SUNW,SPARCstation-10,SX directory by 566 # a symbolic link is being propagated. 567 # 568 INS.slink1= $(RM) -r $@; $(SYMLINK) $(PLATFORM) $@ 569 INS.slink2= $(RM) -r $@; $(SYMLINK) ../$(PLATFORM)/$(@F) $@ 570 INS.slink3= $(RM) -r $@; $(SYMLINK) $(IMPLEMENTED_PLATFORM) $@ 571 INS.slink4= $(RM) -r $@; $(SYMLINK) ../$(PLATFORM)/include $@ 572 INS.slink5= $(RM) -r $@; $(SYMLINK) ../$(PLATFORM)/sbin $@ 573 INS.slink6= $(RM) -r $@; $(SYMLINK) ../../$(PLATFORM)/lib/$(MODULE) $@ 574 INS.slink7= $(RM) -r $@; $(SYMLINK) ../../$(PLATFORM)/sbin/$(@F) $@ 575 576 ROOT_PLAT_LINKS = $(PLAT_LINKS:%=$(ROOT_PLAT_DIR)/%) 577 ROOT_PLAT_LINKS_2 = $(PLAT_LINKS_2:%=$(ROOT_PLAT_DIR)/%) 578 USR_PLAT_LINKS = $(PLAT_LINKS:%=$(USR_PLAT_DIR)/%) 579 USR_PLAT_LINKS_2 = $(PLAT_LINKS_2:%=$(USR_PLAT_DIR)/%) 580 581 # 582 # Collection of all relevant, delivered kernel modules. 583 # 584 # Note that we insist on building genunix first, because everything else 585 # uniquifies against it. When doing a 'make' from usr/src/uts/, we'll enter 586 # the platform directories first. These will cd into the corresponding genunix 587 # directory and build it. So genunix /shouldn't/ get rebuilt when we get to 588 # building all the kernel modules. However, due to an as-yet-unexplained 589 # problem with dependencies, sometimes it does get rebuilt, which then messes 590 # up the other modules. So we always force the issue here rather than try to 591 # build genunix in parallel with everything else. 592 # 593 PARALLEL_KMODS = $(DRV_KMODS) $(EXEC_KMODS) $(FS_KMODS) $(SCHED_KMODS) \ 594 $(TOD_KMODS) $(STRMOD_KMODS) $(SYS_KMODS) $(MISC_KMODS) \ 595 $(NLMISC_KMODS) $(MACH_KMODS) $(CPU_KMODS) $(GSS_KMODS) \ 596 $(MMU_KMODS) $(DACF_KMODS) $(EXPORT_KMODS) $(IPP_KMODS) \ 597 $(CRYPTO_KMODS) $(PCBE_KMODS) \ 598 $(DRV_KMODS_$(CLASS)) $(MISC_KMODS_$(CLASS)) $(MAC_KMODS) \ 599 $(BRAND_KMODS) $(KICONV_KMODS) \ 600 $(SOCKET_KMODS) 601 602 KMODS = $(GENUNIX_KMODS) $(PARALLEL_KMODS) 603 604 $(PARALLEL_KMODS): $(GENUNIX_KMODS) 605 606 LINT_KMODS = $(DRV_KMODS) $(EXEC_KMODS) $(FS_KMODS) $(SCHED_KMODS) \ 607 $(TOD_KMODS) $(STRMOD_KMODS) $(SYS_KMODS) $(MISC_KMODS) \ 608 $(MACH_KMODS) $(GSS_KMODS) $(DACF_KMODS) $(IPP_KMODS) \ 609 $(CRYPTO_KMODS) $(PCBE_KMODS) \ 610 $(DRV_KMODS_$(CLASS)) $(MISC_KMODS_$(CLASS)) $(MAC_KMODS) \ 611 $(BRAND_KMODS) $(KICONV_KMODS) $(SOCKET_KMODS) 612 613 # 614 # Files to be compiled with -xa, to generate basic block execution 615 # count data. 616 # 617 # There are several ways to compile parts of the kernel for kcov: 618 # 1) Add targets to BB_FILES here or in other Makefiles 619 # (they must in the form of $(OBJS_DIR)/target.o) 620 # 2) setenv BB_FILES '$(XXX_OBJS:%=$(OBJS_DIR)/%)' 621 # 3) setenv BB_FILES '$(OBJECTS)' 622 # 623 # Do NOT setenv CFLAGS -xa, as that will cause infinite recursion 624 # in unix_bb.o 625 # 626 BB_FILES = 627 $(BB_FILES) := XAOPT = -xa 628 629 # 630 # The idea here is for unix_bb.o to be in all kernels except the 631 # kernel which actually gets shipped to customers. In practice, 632 # $(RELEASE_BUILD) is on for a number of the late beta and fcs builds. 633 # 634 $(NOT_RELEASE_BUILD)$(OBJS_DIR)/unix_bb.o := CPPFLAGS += -DKCOV 635 $(NOT_RELEASE_BUILD)$(OBJS_DIR)/unix_bb.ln := CPPFLAGS += -DKCOV 636 637 # 638 # Do not let unix_bb.o get compiled with -xa! 639 # 640 $(OBJS_DIR)/unix_bb.o := XAOPT = 641 642 # 643 # Privilege files 644 # 645 PRIVS_AWK = $(SRC)/uts/common/os/privs.awk 646 PRIVS_DEF = $(SRC)/uts/common/os/priv_defs 647 648 # 649 # USB device data 650 # 651 USBDEVS_AWK = $(SRC)/uts/common/io/usb/usbdevs2h.awk 652 USBDEVS_DATA = $(SRC)/uts/common/io/usb/usbdevs 653 654 655 # 656 # If we're using the newer CTF tools, then we need to make sure that we 657 # are building with the private -X option to ctfconvert which allows us 658 # to fixup the struct cpu to account for machcpu. 659 # 660 $(BUILD_NEW_CTF_TOOLS)CTFCVTFLAGS += -X