1 #
   2 # CDDL HEADER START
   3 #
   4 # The contents of this file are subject to the terms of the
   5 # Common Development and Distribution License (the "License").
   6 # You may not use this file except in compliance with the License.
   7 #
   8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9 # or http://www.opensolaris.org/os/licensing.
  10 # See the License for the specific language governing permissions
  11 # and limitations under the License.
  12 #
  13 # When distributing Covered Code, include this CDDL HEADER in each
  14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15 # If applicable, add the following below this CDDL HEADER, with the
  16 # fields enclosed by brackets "[]" replaced with your own identifying
  17 # information: Portions Copyright [yyyy] [name of copyright owner]
  18 #
  19 # CDDL HEADER END
  20 #
  21 #
  22 # Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
  23 # Use is subject to license terms.
  24 # Copyright (c) 2011 Bayard G. Bell. All rights reserved.
  25 #
  26 # This makefile drives the production of the emlxs driver kernel module.
  27 #
  28 # Path to the base of the uts directory tree (usually /usr/src/uts).
  29 #
  30 UTSBASE         = ../../
  31 COMMON_BASE     = ../../../common
  32 
  33 #
  34 #       Define the module and object file sets.
  35 #
  36 MODULE          = emlxs
  37 OBJECTS         = $(EMLXS_OBJS:%=$(OBJS_DIR)/%)
  38 LINTS           = $(EMLXS_OBJS:%.o=$(LINTS_DIR)/%.ln)
  39 ROOTMODULE      = $(ROOT_DRV_DIR)/$(MODULE)
  40 CONF_SRCDIR     = $(UTSBASE)/common/io/fibre-channel/fca/emlxs
  41 
  42 #
  43 #       Include common rules.
  44 #
  45 ARCHDIR         = intel
  46 include ../Makefile.$(ARCHDIR)
  47 
  48 #
  49 #       Define targets
  50 #
  51 ALL_TARGET      = $(BINARY) $(SRC_CONFILE)
  52 LINT_TARGET     = $(MODULE).lint
  53 INSTALL_TARGET  = $(BINARY) $(ROOTMODULE) $(ROOT_CONFFILE)
  54 
  55 EMLXS_FLAGS             = -DEMLXS_I386
  56 EMLXS_FLAGS             += -DS11
  57 EMLXS_FLAGS             += -DVERSION=\"11\"
  58 EMLXS_FLAGS             += -DMACH=\"$(MACH)\"
  59 EMLXS_CFLAGS            = $(EMLXS_FLAGS)
  60 EMLXS_LFLAGS            = $(EMLXS_FLAGS)
  61 CFLAGS                  += $(EMLXS_CFLAGS) -DEMLXS_ARCH=\"$(CLASS)\"
  62 LINTTAGS                += $(EMLXS_LFLAGS) -DEMLXS_ARCH=\"$(CLASS)\"
  63 
  64 
  65 #
  66 #       Overrides and depends_on
  67 #
  68 INC_PATH        += -I$(ROOT)/usr/include
  69 INC_PATH        += -I$(UTSBASE)/common/sys
  70 INC_PATH        += -I$(COMMON_BASE)/bignum
  71 INC_PATH        += -I$(UTSBASE)/common/sys/fibre-channel
  72 INC_PATH        += -I$(UTSBASE)/common/sys/fibre-channel/fca
  73 INC_PATH        += -I$(UTSBASE)/common/sys/fibre-channel/fca/emlxs
  74 INC_PATH        += -I$(UTSBASE)/common/sys/fibre-channel/impl
  75 INC_PATH        += -I$(UTSBASE)/common/sys/fibre-channel/ulp
  76 
  77 #
  78 #       misc/fctl required because #ifdef MODSYM_LOAD code
  79 #       triggered by -DS11; uses DDI calls to load FCA symbols
  80 #
  81 LDFLAGS         += -dy -Nmisc/md5 -Nmisc/sha1
  82 LDFLAGS         += -Nmisc/bignum -Nmisc/fctl
  83 
  84 #
  85 # For now, disable these lint checks; maintainers should endeavor
  86 # to investigate and remove these for maximum lint coverage.
  87 #
  88 LINTTAGS        += -erroff=E_BAD_PTR_CAST_ALIGN
  89 LINTTAGS        += -erroff=E_STATIC_UNUSED
  90 LINTTAGS        += -erroff=E_ASSIGN_NARROW_CONV
  91 LINTTAGS        += -erroff=E_SUSPICIOUS_COMPARISON
  92 LINTTAGS        += -erroff=E_INCONS_VAL_TYPE_DECL2
  93 
  94 CERRWARN        += -_gcc=-Wno-parentheses
  95 CERRWARN        += -_gcc=-Wno-unused-label
  96 CERRWARN        += -_gcc=-Wno-uninitialized
  97 
  98 #
  99 #       Default build targets.
 100 #
 101 .KEEP_STATE:
 102 
 103 def:            $(DEF_DEPS)
 104 
 105 all:            $(ALL_DEPS)
 106 
 107 clean:          $(CLEAN_DEPS)
 108 
 109 clobber:        $(CLOBBER_DEPS)
 110 
 111 lint:           $(LINT_DEPS)
 112 
 113 modlintlib:     $(MODLINTLIB_DEPS)
 114 
 115 clean.lint:     $(CLEAN_LINT_DEPS)
 116 
 117 install:        $(INSTALL_DEPS)
 118 
 119 #
 120 #       Include common targets.
 121 #
 122 include ../Makefile.targ