1 '\" te
   2 .\" Copyright (c) 2012 by Delphix. All rights reserved.
   3 .\" Copyright (c) 2012 Joyent, Inc. All rights reserved.
   4 .\" The contents of this file are subject to the terms of the Common Development
   5 .\" and Distribution License (the "License").  You may not use this file except
   6 .\" in compliance with the License. You can obtain a copy of the license at
   7 .\" usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
   8 .\"
   9 .\" See the License for the specific language governing permissions and
  10 .\" limitations under the License. When distributing Covered Code, include this
  11 .\" CDDL HEADER in each file and include the License file at
  12 .\" usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this
  13 .\" CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your
  14 .\" own identifying information:
  15 .\" Portions Copyright [yyyy] [name of copyright owner]
  16 .TH ZPOOL-FEATURES 5 "Oct 24, 2012"
  17 .SH NAME
  18 zpool\-features \- ZFS pool feature descriptions
  19 .SH DESCRIPTION
  20 .sp
  21 .LP
  22 ZFS pool on\-disk format versions are specified via "features" which replace
  23 the old on\-disk format numbers (the last supported on\-disk format number is
  24 28). To enable a feature on a pool use the \fBupgrade\fR subcommand of the
  25 \fBzpool\fR(1M) command, or set the \fBfeature@\fR\fIfeature_name\fR property
  26 to \fBenabled\fR.
  27 .sp
  28 .LP
  29 The pool format does not affect file system version compatibility or the ability
  30 to send file systems between pools.
  31 .sp
  32 .LP
  33 Since most features can be enabled independently of each other the on\-disk
  34 format of the pool is specified by the set of all features marked as
  35 \fBactive\fR on the pool. If the pool was created by another software version
  36 this set may include unsupported features.
  37 .SS "Identifying features"
  38 .sp
  39 .LP
  40 Every feature has a guid of the form \fIcom.example:feature_name\fR. The reverse
  41 DNS name ensures that the feature's guid is unique across all ZFS
  42 implementations. When unsupported features are encountered on a pool they will
  43 be identified by their guids. Refer to the documentation for the ZFS
  44 implementation that created the pool for information about those features.
  45 .sp
  46 .LP
  47 Each supported feature also has a short name. By convention a feature's short
  48 name is the portion of its guid which follows the ':' (e.g.
  49 \fIcom.example:feature_name\fR would have the short name \fIfeature_name\fR),
  50 however a feature's short name may differ across ZFS implementations if
  51 following the convention would result in name conflicts.
  52 .SS "Feature states"
  53 .sp
  54 .LP
  55 Features can be in one of three states:
  56 .sp
  57 .ne 2
  58 .na
  59 \fB\fBactive\fR\fR
  60 .ad
  61 .RS 12n
  62 This feature's on\-disk format changes are in effect on the pool. Support for
  63 this feature is required to import the pool in read\-write mode. If this
  64 feature is not read-only compatible, support is also required to import the pool
  65 in read\-only mode (see "Read\-only compatibility").
  66 .RE
  67 
  68 .sp
  69 .ne 2
  70 .na
  71 \fB\fBenabled\fR\fR
  72 .ad
  73 .RS 12n
  74 An administrator has marked this feature as enabled on the pool, but the
  75 feature's on\-disk format changes have not been made yet. The pool can still be
  76 imported by software that does not support this feature, but changes may be made
  77 to the on\-disk format at any time which will move the feature to the
  78 \fBactive\fR state. Some features may support returning to the \fBenabled\fR
  79 state after becoming \fBactive\fR. See feature\-specific documentation for
  80 details.
  81 .RE
  82 
  83 .sp
  84 .ne 2
  85 .na
  86 \fBdisabled\fR
  87 .ad
  88 .RS 12n
  89 This feature's on\-disk format changes have not been made and will not be made
  90 unless an administrator moves the feature to the \fBenabled\fR state. Features
  91 cannot be disabled once they have been enabled.
  92 .RE
  93 
  94 .sp
  95 .LP
  96 The state of supported features is exposed through pool properties of the form
  97 \fIfeature@short_name\fR.
  98 .SS "Read\-only compatibility"
  99 .sp
 100 .LP
 101 Some features may make on\-disk format changes that do not interfere with other
 102 software's ability to read from the pool. These features are referred to as
 103 "read\-only compatible". If all unsupported features on a pool are read\-only
 104 compatible, the pool can be imported in read\-only mode by setting the
 105 \fBreadonly\fR property during import (see \fBzpool\fR(1M) for details on
 106 importing pools).
 107 .SS "Unsupported features"
 108 .sp
 109 .LP
 110 For each unsupported feature enabled on an imported pool a pool property
 111 named \fIunsupported@feature_guid\fR will indicate why the import was allowed
 112 despite the unsupported feature. Possible values for this property are:
 113 
 114 .sp
 115 .ne 2
 116 .na
 117 \fB\fBinactive\fR\fR
 118 .ad
 119 .RS 12n
 120 The feature is in the \fBenabled\fR state and therefore the pool's on\-disk
 121 format is still compatible with software that does not support this feature.
 122 .RE
 123 
 124 .sp
 125 .ne 2
 126 .na
 127 \fB\fBreadonly\fR\fR
 128 .ad
 129 .RS 12n
 130 The feature is read\-only compatible and the pool has been imported in
 131 read\-only mode.
 132 .RE
 133 
 134 .SS "Feature dependencies"
 135 .sp
 136 .LP
 137 Some features depend on other features being enabled in order to function
 138 properly. Enabling a feature will automatically enable any features it
 139 depends on.
 140 .SH FEATURES
 141 .sp
 142 .LP
 143 The following features are supported on this system:
 144 .sp
 145 .ne 2
 146 .na
 147 \fB\fBasync_destroy\fR\fR
 148 .ad
 149 .RS 4n
 150 .TS
 151 l l .
 152 GUID    com.delphix:async_destroy
 153 READ\-ONLY COMPATIBLE   yes
 154 DEPENDENCIES    none
 155 .TE
 156 
 157 Destroying a file system requires traversing all of its data in order to
 158 return its used space to the pool. Without \fBasync_destroy\fR the file system
 159 is not fully removed until all space has been reclaimed. If the destroy
 160 operation is interrupted by a reboot or power outage the next attempt to open
 161 the pool will need to complete the destroy operation synchronously.
 162 
 163 When \fBasync_destroy\fR is enabled the file system's data will be reclaimed
 164 by a background process, allowing the destroy operation to complete without
 165 traversing the entire file system. The background process is able to resume
 166 interrupted destroys after the pool has been opened, eliminating the need
 167 to finish interrupted destroys as part of the open operation. The amount
 168 of space remaining to be reclaimed by the background process is available
 169 through the \fBfreeing\fR property.
 170 
 171 This feature is only \fBactive\fR while \fBfreeing\fR is non\-zero.
 172 .RE
 173 
 174 .sp
 175 .ne 2
 176 .na
 177 \fB\fBempty_bpobj\fR\fR
 178 .ad
 179 .RS 4n
 180 .TS
 181 l l .
 182 GUID    com.delphix:empty_bpobj
 183 READ\-ONLY COMPATIBLE   yes
 184 DEPENDENCIES    none
 185 .TE
 186 
 187 This feature increases the performance of creating and using a large
 188 number of snapshots of a single filesystem or volume, and also reduces
 189 the disk space required.
 190 
 191 When there are many snapshots, each snapshot uses many Block Pointer
 192 Objects (bpobj's) to track blocks associated with that snapshot.
 193 However, in common use cases, most of these bpobj's are empty.  This
 194 feature allows us to create each bpobj on-demand, thus eliminating the
 195 empty bpobjs.
 196 
 197 This feature is \fBactive\fR while there are any filesystems, volumes,
 198 or snapshots which were created after enabling this feature.
 199 .RE
 200 
 201 .sp
 202 .ne 2
 203 .na
 204 \fB\fBfilesystem_limits\fR\fR
 205 .ad
 206 .RS 4n
 207 .TS
 208 l l .
 209 GUID    com.joyent:filesystem_limits
 210 READ\-ONLY COMPATIBLE   yes
 211 DEPENDENCIES    none
 212 .TE
 213 
 214 This feature enables filesystem and snapshot limits. These limits can be used
 215 to control how many filesystems and/or snapshots can be created at the point in
 216 the tree on which the limits are set.
 217 
 218 This feature is \fBactive\fR once either of the limit properties has been
 219 set on a dataset and is deactivated when the last limit is removed.
 220 .RE
 221 
 222 .SH "SEE ALSO"
 223 \fBzpool\fR(1M)