1 /*
   2  * CDDL HEADER START
   3  *
   4  * The contents of this file are subject to the terms of the
   5  * Common Development and Distribution License (the "License").
   6  * You may not use this file except in compliance with the License.
   7  *
   8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9  * or http://www.opensolaris.org/os/licensing.
  10  * See the License for the specific language governing permissions
  11  * and limitations under the License.
  12  *
  13  * When distributing Covered Code, include this CDDL HEADER in each
  14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15  * If applicable, add the following below this CDDL HEADER, with the
  16  * fields enclosed by brackets "[]" replaced with your own identifying
  17  * information: Portions Copyright [yyyy] [name of copyright owner]
  18  *
  19  * CDDL HEADER END
  20  */
  21 
  22 /*
  23  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
  24  * Use is subject to license terms.
  25  */
  26 
  27 /*
  28  * Copyright (c) 2011, Joyent, Inc. All rights reserved.
  29  */
  30 
  31 #ifndef _SYS_DTRACE_H
  32 #define _SYS_DTRACE_H
  33 
  34 #ifdef  __cplusplus
  35 extern "C" {
  36 #endif
  37 
  38 /*
  39  * DTrace Dynamic Tracing Software: Kernel Interfaces
  40  *
  41  * Note: The contents of this file are private to the implementation of the
  42  * Solaris system and DTrace subsystem and are subject to change at any time
  43  * without notice.  Applications and drivers using these interfaces will fail
  44  * to run on future releases.  These interfaces should not be used for any
  45  * purpose except those expressly outlined in dtrace(7D) and libdtrace(3LIB).
  46  * Please refer to the "Solaris Dynamic Tracing Guide" for more information.
  47  */
  48 
  49 #ifndef _ASM
  50 
  51 #include <sys/types.h>
  52 #include <sys/modctl.h>
  53 #include <sys/processor.h>
  54 #include <sys/systm.h>
  55 #include <sys/ctf_api.h>
  56 #include <sys/cyclic.h>
  57 #include <sys/int_limits.h>
  58 
  59 /*
  60  * DTrace Universal Constants and Typedefs
  61  */
  62 #define DTRACE_CPUALL           -1      /* all CPUs */
  63 #define DTRACE_IDNONE           0       /* invalid probe identifier */
  64 #define DTRACE_EPIDNONE         0       /* invalid enabled probe identifier */
  65 #define DTRACE_AGGIDNONE        0       /* invalid aggregation identifier */
  66 #define DTRACE_AGGVARIDNONE     0       /* invalid aggregation variable ID */
  67 #define DTRACE_CACHEIDNONE      0       /* invalid predicate cache */
  68 #define DTRACE_PROVNONE         0       /* invalid provider identifier */
  69 #define DTRACE_METAPROVNONE     0       /* invalid meta-provider identifier */
  70 #define DTRACE_ARGNONE          -1      /* invalid argument index */
  71 
  72 #define DTRACE_PROVNAMELEN      64
  73 #define DTRACE_MODNAMELEN       64
  74 #define DTRACE_FUNCNAMELEN      128
  75 #define DTRACE_NAMELEN          64
  76 #define DTRACE_FULLNAMELEN      (DTRACE_PROVNAMELEN + DTRACE_MODNAMELEN + \
  77                                 DTRACE_FUNCNAMELEN + DTRACE_NAMELEN + 4)
  78 #define DTRACE_ARGTYPELEN       128
  79 
  80 typedef uint32_t dtrace_id_t;           /* probe identifier */
  81 typedef uint32_t dtrace_epid_t;         /* enabled probe identifier */
  82 typedef uint32_t dtrace_aggid_t;        /* aggregation identifier */
  83 typedef int64_t dtrace_aggvarid_t;      /* aggregation variable identifier */
  84 typedef uint16_t dtrace_actkind_t;      /* action kind */
  85 typedef int64_t dtrace_optval_t;        /* option value */
  86 typedef uint32_t dtrace_cacheid_t;      /* predicate cache identifier */
  87 
  88 typedef enum dtrace_probespec {
  89         DTRACE_PROBESPEC_NONE = -1,
  90         DTRACE_PROBESPEC_PROVIDER = 0,
  91         DTRACE_PROBESPEC_MOD,
  92         DTRACE_PROBESPEC_FUNC,
  93         DTRACE_PROBESPEC_NAME
  94 } dtrace_probespec_t;
  95 
  96 /*
  97  * DTrace Intermediate Format (DIF)
  98  *
  99  * The following definitions describe the DTrace Intermediate Format (DIF), a
 100  * a RISC-like instruction set and program encoding used to represent
 101  * predicates and actions that can be bound to DTrace probes.  The constants
 102  * below defining the number of available registers are suggested minimums; the
 103  * compiler should use DTRACEIOC_CONF to dynamically obtain the number of
 104  * registers provided by the current DTrace implementation.
 105  */
 106 #define DIF_VERSION_1   1               /* DIF version 1: Solaris 10 Beta */
 107 #define DIF_VERSION_2   2               /* DIF version 2: Solaris 10 FCS */
 108 #define DIF_VERSION     DIF_VERSION_2   /* latest DIF instruction set version */
 109 #define DIF_DIR_NREGS   8               /* number of DIF integer registers */
 110 #define DIF_DTR_NREGS   8               /* number of DIF tuple registers */
 111 
 112 #define DIF_OP_OR       1               /* or   r1, r2, rd */
 113 #define DIF_OP_XOR      2               /* xor  r1, r2, rd */
 114 #define DIF_OP_AND      3               /* and  r1, r2, rd */
 115 #define DIF_OP_SLL      4               /* sll  r1, r2, rd */
 116 #define DIF_OP_SRL      5               /* srl  r1, r2, rd */
 117 #define DIF_OP_SUB      6               /* sub  r1, r2, rd */
 118 #define DIF_OP_ADD      7               /* add  r1, r2, rd */
 119 #define DIF_OP_MUL      8               /* mul  r1, r2, rd */
 120 #define DIF_OP_SDIV     9               /* sdiv r1, r2, rd */
 121 #define DIF_OP_UDIV     10              /* udiv r1, r2, rd */
 122 #define DIF_OP_SREM     11              /* srem r1, r2, rd */
 123 #define DIF_OP_UREM     12              /* urem r1, r2, rd */
 124 #define DIF_OP_NOT      13              /* not  r1, rd */
 125 #define DIF_OP_MOV      14              /* mov  r1, rd */
 126 #define DIF_OP_CMP      15              /* cmp  r1, r2 */
 127 #define DIF_OP_TST      16              /* tst  r1 */
 128 #define DIF_OP_BA       17              /* ba   label */
 129 #define DIF_OP_BE       18              /* be   label */
 130 #define DIF_OP_BNE      19              /* bne  label */
 131 #define DIF_OP_BG       20              /* bg   label */
 132 #define DIF_OP_BGU      21              /* bgu  label */
 133 #define DIF_OP_BGE      22              /* bge  label */
 134 #define DIF_OP_BGEU     23              /* bgeu label */
 135 #define DIF_OP_BL       24              /* bl   label */
 136 #define DIF_OP_BLU      25              /* blu  label */
 137 #define DIF_OP_BLE      26              /* ble  label */
 138 #define DIF_OP_BLEU     27              /* bleu label */
 139 #define DIF_OP_LDSB     28              /* ldsb [r1], rd */
 140 #define DIF_OP_LDSH     29              /* ldsh [r1], rd */
 141 #define DIF_OP_LDSW     30              /* ldsw [r1], rd */
 142 #define DIF_OP_LDUB     31              /* ldub [r1], rd */
 143 #define DIF_OP_LDUH     32              /* lduh [r1], rd */
 144 #define DIF_OP_LDUW     33              /* lduw [r1], rd */
 145 #define DIF_OP_LDX      34              /* ldx  [r1], rd */
 146 #define DIF_OP_RET      35              /* ret  rd */
 147 #define DIF_OP_NOP      36              /* nop */
 148 #define DIF_OP_SETX     37              /* setx intindex, rd */
 149 #define DIF_OP_SETS     38              /* sets strindex, rd */
 150 #define DIF_OP_SCMP     39              /* scmp r1, r2 */
 151 #define DIF_OP_LDGA     40              /* ldga var, ri, rd */
 152 #define DIF_OP_LDGS     41              /* ldgs var, rd */
 153 #define DIF_OP_STGS     42              /* stgs var, rs */
 154 #define DIF_OP_LDTA     43              /* ldta var, ri, rd */
 155 #define DIF_OP_LDTS     44              /* ldts var, rd */
 156 #define DIF_OP_STTS     45              /* stts var, rs */
 157 #define DIF_OP_SRA      46              /* sra  r1, r2, rd */
 158 #define DIF_OP_CALL     47              /* call subr, rd */
 159 #define DIF_OP_PUSHTR   48              /* pushtr type, rs, rr */
 160 #define DIF_OP_PUSHTV   49              /* pushtv type, rs, rv */
 161 #define DIF_OP_POPTS    50              /* popts */
 162 #define DIF_OP_FLUSHTS  51              /* flushts */
 163 #define DIF_OP_LDGAA    52              /* ldgaa var, rd */
 164 #define DIF_OP_LDTAA    53              /* ldtaa var, rd */
 165 #define DIF_OP_STGAA    54              /* stgaa var, rs */
 166 #define DIF_OP_STTAA    55              /* sttaa var, rs */
 167 #define DIF_OP_LDLS     56              /* ldls var, rd */
 168 #define DIF_OP_STLS     57              /* stls var, rs */
 169 #define DIF_OP_ALLOCS   58              /* allocs r1, rd */
 170 #define DIF_OP_COPYS    59              /* copys  r1, r2, rd */
 171 #define DIF_OP_STB      60              /* stb  r1, [rd] */
 172 #define DIF_OP_STH      61              /* sth  r1, [rd] */
 173 #define DIF_OP_STW      62              /* stw  r1, [rd] */
 174 #define DIF_OP_STX      63              /* stx  r1, [rd] */
 175 #define DIF_OP_ULDSB    64              /* uldsb [r1], rd */
 176 #define DIF_OP_ULDSH    65              /* uldsh [r1], rd */
 177 #define DIF_OP_ULDSW    66              /* uldsw [r1], rd */
 178 #define DIF_OP_ULDUB    67              /* uldub [r1], rd */
 179 #define DIF_OP_ULDUH    68              /* ulduh [r1], rd */
 180 #define DIF_OP_ULDUW    69              /* ulduw [r1], rd */
 181 #define DIF_OP_ULDX     70              /* uldx  [r1], rd */
 182 #define DIF_OP_RLDSB    71              /* rldsb [r1], rd */
 183 #define DIF_OP_RLDSH    72              /* rldsh [r1], rd */
 184 #define DIF_OP_RLDSW    73              /* rldsw [r1], rd */
 185 #define DIF_OP_RLDUB    74              /* rldub [r1], rd */
 186 #define DIF_OP_RLDUH    75              /* rlduh [r1], rd */
 187 #define DIF_OP_RLDUW    76              /* rlduw [r1], rd */
 188 #define DIF_OP_RLDX     77              /* rldx  [r1], rd */
 189 #define DIF_OP_XLATE    78              /* xlate xlrindex, rd */
 190 #define DIF_OP_XLARG    79              /* xlarg xlrindex, rd */
 191 
 192 #define DIF_INTOFF_MAX          0xffff  /* highest integer table offset */
 193 #define DIF_STROFF_MAX          0xffff  /* highest string table offset */
 194 #define DIF_REGISTER_MAX        0xff    /* highest register number */
 195 #define DIF_VARIABLE_MAX        0xffff  /* highest variable identifier */
 196 #define DIF_SUBROUTINE_MAX      0xffff  /* highest subroutine code */
 197 
 198 #define DIF_VAR_ARRAY_MIN       0x0000  /* lowest numbered array variable */
 199 #define DIF_VAR_ARRAY_UBASE     0x0080  /* lowest user-defined array */
 200 #define DIF_VAR_ARRAY_MAX       0x00ff  /* highest numbered array variable */
 201 
 202 #define DIF_VAR_OTHER_MIN       0x0100  /* lowest numbered scalar or assc */
 203 #define DIF_VAR_OTHER_UBASE     0x0500  /* lowest user-defined scalar or assc */
 204 #define DIF_VAR_OTHER_MAX       0xffff  /* highest numbered scalar or assc */
 205 
 206 #define DIF_VAR_ARGS            0x0000  /* arguments array */
 207 #define DIF_VAR_REGS            0x0001  /* registers array */
 208 #define DIF_VAR_UREGS           0x0002  /* user registers array */
 209 #define DIF_VAR_VMREGS          0x0003  /* virtual machine registers array */
 210 #define DIF_VAR_CURTHREAD       0x0100  /* thread pointer */
 211 #define DIF_VAR_TIMESTAMP       0x0101  /* timestamp */
 212 #define DIF_VAR_VTIMESTAMP      0x0102  /* virtual timestamp */
 213 #define DIF_VAR_IPL             0x0103  /* interrupt priority level */
 214 #define DIF_VAR_EPID            0x0104  /* enabled probe ID */
 215 #define DIF_VAR_ID              0x0105  /* probe ID */
 216 #define DIF_VAR_ARG0            0x0106  /* first argument */
 217 #define DIF_VAR_ARG1            0x0107  /* second argument */
 218 #define DIF_VAR_ARG2            0x0108  /* third argument */
 219 #define DIF_VAR_ARG3            0x0109  /* fourth argument */
 220 #define DIF_VAR_ARG4            0x010a  /* fifth argument */
 221 #define DIF_VAR_ARG5            0x010b  /* sixth argument */
 222 #define DIF_VAR_ARG6            0x010c  /* seventh argument */
 223 #define DIF_VAR_ARG7            0x010d  /* eighth argument */
 224 #define DIF_VAR_ARG8            0x010e  /* ninth argument */
 225 #define DIF_VAR_ARG9            0x010f  /* tenth argument */
 226 #define DIF_VAR_STACKDEPTH      0x0110  /* stack depth */
 227 #define DIF_VAR_CALLER          0x0111  /* caller */
 228 #define DIF_VAR_PROBEPROV       0x0112  /* probe provider */
 229 #define DIF_VAR_PROBEMOD        0x0113  /* probe module */
 230 #define DIF_VAR_PROBEFUNC       0x0114  /* probe function */
 231 #define DIF_VAR_PROBENAME       0x0115  /* probe name */
 232 #define DIF_VAR_PID             0x0116  /* process ID */
 233 #define DIF_VAR_TID             0x0117  /* (per-process) thread ID */
 234 #define DIF_VAR_EXECNAME        0x0118  /* name of executable */
 235 #define DIF_VAR_ZONENAME        0x0119  /* zone name associated with process */
 236 #define DIF_VAR_WALLTIMESTAMP   0x011a  /* wall-clock timestamp */
 237 #define DIF_VAR_USTACKDEPTH     0x011b  /* user-land stack depth */
 238 #define DIF_VAR_UCALLER         0x011c  /* user-level caller */
 239 #define DIF_VAR_PPID            0x011d  /* parent process ID */
 240 #define DIF_VAR_UID             0x011e  /* process user ID */
 241 #define DIF_VAR_GID             0x011f  /* process group ID */
 242 #define DIF_VAR_ERRNO           0x0120  /* thread errno */
 243 
 244 #define DIF_SUBR_RAND                   0
 245 #define DIF_SUBR_MUTEX_OWNED            1
 246 #define DIF_SUBR_MUTEX_OWNER            2
 247 #define DIF_SUBR_MUTEX_TYPE_ADAPTIVE    3
 248 #define DIF_SUBR_MUTEX_TYPE_SPIN        4
 249 #define DIF_SUBR_RW_READ_HELD           5
 250 #define DIF_SUBR_RW_WRITE_HELD          6
 251 #define DIF_SUBR_RW_ISWRITER            7
 252 #define DIF_SUBR_COPYIN                 8
 253 #define DIF_SUBR_COPYINSTR              9
 254 #define DIF_SUBR_SPECULATION            10
 255 #define DIF_SUBR_PROGENYOF              11
 256 #define DIF_SUBR_STRLEN                 12
 257 #define DIF_SUBR_COPYOUT                13
 258 #define DIF_SUBR_COPYOUTSTR             14
 259 #define DIF_SUBR_ALLOCA                 15
 260 #define DIF_SUBR_BCOPY                  16
 261 #define DIF_SUBR_COPYINTO               17
 262 #define DIF_SUBR_MSGDSIZE               18
 263 #define DIF_SUBR_MSGSIZE                19
 264 #define DIF_SUBR_GETMAJOR               20
 265 #define DIF_SUBR_GETMINOR               21
 266 #define DIF_SUBR_DDI_PATHNAME           22
 267 #define DIF_SUBR_STRJOIN                23
 268 #define DIF_SUBR_LLTOSTR                24
 269 #define DIF_SUBR_BASENAME               25
 270 #define DIF_SUBR_DIRNAME                26
 271 #define DIF_SUBR_CLEANPATH              27
 272 #define DIF_SUBR_STRCHR                 28
 273 #define DIF_SUBR_STRRCHR                29
 274 #define DIF_SUBR_STRSTR                 30
 275 #define DIF_SUBR_STRTOK                 31
 276 #define DIF_SUBR_SUBSTR                 32
 277 #define DIF_SUBR_INDEX                  33
 278 #define DIF_SUBR_RINDEX                 34
 279 #define DIF_SUBR_HTONS                  35
 280 #define DIF_SUBR_HTONL                  36
 281 #define DIF_SUBR_HTONLL                 37
 282 #define DIF_SUBR_NTOHS                  38
 283 #define DIF_SUBR_NTOHL                  39
 284 #define DIF_SUBR_NTOHLL                 40
 285 #define DIF_SUBR_INET_NTOP              41
 286 #define DIF_SUBR_INET_NTOA              42
 287 #define DIF_SUBR_INET_NTOA6             43
 288 #define DIF_SUBR_TOUPPER                44
 289 #define DIF_SUBR_TOLOWER                45
 290 
 291 #define DIF_SUBR_MAX                    45      /* max subroutine value */
 292 
 293 typedef uint32_t dif_instr_t;
 294 
 295 #define DIF_INSTR_OP(i)                 (((i) >> 24) & 0xff)
 296 #define DIF_INSTR_R1(i)                 (((i) >> 16) & 0xff)
 297 #define DIF_INSTR_R2(i)                 (((i) >>  8) & 0xff)
 298 #define DIF_INSTR_RD(i)                 ((i) & 0xff)
 299 #define DIF_INSTR_RS(i)                 ((i) & 0xff)
 300 #define DIF_INSTR_LABEL(i)              ((i) & 0xffffff)
 301 #define DIF_INSTR_VAR(i)                (((i) >>  8) & 0xffff)
 302 #define DIF_INSTR_INTEGER(i)            (((i) >>  8) & 0xffff)
 303 #define DIF_INSTR_STRING(i)             (((i) >>  8) & 0xffff)
 304 #define DIF_INSTR_SUBR(i)               (((i) >>  8) & 0xffff)
 305 #define DIF_INSTR_TYPE(i)               (((i) >> 16) & 0xff)
 306 #define DIF_INSTR_XLREF(i)              (((i) >>  8) & 0xffff)
 307 
 308 #define DIF_INSTR_FMT(op, r1, r2, d) \
 309         (((op) << 24) | ((r1) << 16) | ((r2) << 8) | (d))
 310 
 311 #define DIF_INSTR_NOT(r1, d)            (DIF_INSTR_FMT(DIF_OP_NOT, r1, 0, d))
 312 #define DIF_INSTR_MOV(r1, d)            (DIF_INSTR_FMT(DIF_OP_MOV, r1, 0, d))
 313 #define DIF_INSTR_CMP(op, r1, r2)       (DIF_INSTR_FMT(op, r1, r2, 0))
 314 #define DIF_INSTR_TST(r1)               (DIF_INSTR_FMT(DIF_OP_TST, r1, 0, 0))
 315 #define DIF_INSTR_BRANCH(op, label)     (((op) << 24) | (label))
 316 #define DIF_INSTR_LOAD(op, r1, d)       (DIF_INSTR_FMT(op, r1, 0, d))
 317 #define DIF_INSTR_STORE(op, r1, d)      (DIF_INSTR_FMT(op, r1, 0, d))
 318 #define DIF_INSTR_SETX(i, d)            ((DIF_OP_SETX << 24) | ((i) << 8) | (d))
 319 #define DIF_INSTR_SETS(s, d)            ((DIF_OP_SETS << 24) | ((s) << 8) | (d))
 320 #define DIF_INSTR_RET(d)                (DIF_INSTR_FMT(DIF_OP_RET, 0, 0, d))
 321 #define DIF_INSTR_NOP                   (DIF_OP_NOP << 24)
 322 #define DIF_INSTR_LDA(op, v, r, d)      (DIF_INSTR_FMT(op, v, r, d))
 323 #define DIF_INSTR_LDV(op, v, d)         (((op) << 24) | ((v) << 8) | (d))
 324 #define DIF_INSTR_STV(op, v, rs)        (((op) << 24) | ((v) << 8) | (rs))
 325 #define DIF_INSTR_CALL(s, d)            ((DIF_OP_CALL << 24) | ((s) << 8) | (d))
 326 #define DIF_INSTR_PUSHTS(op, t, r2, rs) (DIF_INSTR_FMT(op, t, r2, rs))
 327 #define DIF_INSTR_POPTS                 (DIF_OP_POPTS << 24)
 328 #define DIF_INSTR_FLUSHTS               (DIF_OP_FLUSHTS << 24)
 329 #define DIF_INSTR_ALLOCS(r1, d)         (DIF_INSTR_FMT(DIF_OP_ALLOCS, r1, 0, d))
 330 #define DIF_INSTR_COPYS(r1, r2, d)      (DIF_INSTR_FMT(DIF_OP_COPYS, r1, r2, d))
 331 #define DIF_INSTR_XLATE(op, r, d)       (((op) << 24) | ((r) << 8) | (d))
 332 
 333 #define DIF_REG_R0      0               /* %r0 is always set to zero */
 334 
 335 /*
 336  * A DTrace Intermediate Format Type (DIF Type) is used to represent the types
 337  * of variables, function and associative array arguments, and the return type
 338  * for each DIF object (shown below).  It contains a description of the type,
 339  * its size in bytes, and a module identifier.
 340  */
 341 typedef struct dtrace_diftype {
 342         uint8_t dtdt_kind;              /* type kind (see below) */
 343         uint8_t dtdt_ckind;             /* type kind in CTF */
 344         uint8_t dtdt_flags;             /* type flags (see below) */
 345         uint8_t dtdt_pad;               /* reserved for future use */
 346         uint32_t dtdt_size;             /* type size in bytes (unless string) */
 347 } dtrace_diftype_t;
 348 
 349 #define DIF_TYPE_CTF            0       /* type is a CTF type */
 350 #define DIF_TYPE_STRING         1       /* type is a D string */
 351 
 352 #define DIF_TF_BYREF            0x1     /* type is passed by reference */
 353 
 354 /*
 355  * A DTrace Intermediate Format variable record is used to describe each of the
 356  * variables referenced by a given DIF object.  It contains an integer variable
 357  * identifier along with variable scope and properties, as shown below.  The
 358  * size of this structure must be sizeof (int) aligned.
 359  */
 360 typedef struct dtrace_difv {
 361         uint32_t dtdv_name;             /* variable name index in dtdo_strtab */
 362         uint32_t dtdv_id;               /* variable reference identifier */
 363         uint8_t dtdv_kind;              /* variable kind (see below) */
 364         uint8_t dtdv_scope;             /* variable scope (see below) */
 365         uint16_t dtdv_flags;            /* variable flags (see below) */
 366         dtrace_diftype_t dtdv_type;     /* variable type (see above) */
 367 } dtrace_difv_t;
 368 
 369 #define DIFV_KIND_ARRAY         0       /* variable is an array of quantities */
 370 #define DIFV_KIND_SCALAR        1       /* variable is a scalar quantity */
 371 
 372 #define DIFV_SCOPE_GLOBAL       0       /* variable has global scope */
 373 #define DIFV_SCOPE_THREAD       1       /* variable has thread scope */
 374 #define DIFV_SCOPE_LOCAL        2       /* variable has local scope */
 375 
 376 #define DIFV_F_REF              0x1     /* variable is referenced by DIFO */
 377 #define DIFV_F_MOD              0x2     /* variable is written by DIFO */
 378 
 379 /*
 380  * DTrace Actions
 381  *
 382  * The upper byte determines the class of the action; the low bytes determines
 383  * the specific action within that class.  The classes of actions are as
 384  * follows:
 385  *
 386  *   [ no class ]                  <= May record process- or kernel-related data
 387  *   DTRACEACT_PROC                <= Only records process-related data
 388  *   DTRACEACT_PROC_DESTRUCTIVE    <= Potentially destructive to processes
 389  *   DTRACEACT_KERNEL              <= Only records kernel-related data
 390  *   DTRACEACT_KERNEL_DESTRUCTIVE  <= Potentially destructive to the kernel
 391  *   DTRACEACT_SPECULATIVE         <= Speculation-related action
 392  *   DTRACEACT_AGGREGATION         <= Aggregating action
 393  */
 394 #define DTRACEACT_NONE                  0       /* no action */
 395 #define DTRACEACT_DIFEXPR               1       /* action is DIF expression */
 396 #define DTRACEACT_EXIT                  2       /* exit() action */
 397 #define DTRACEACT_PRINTF                3       /* printf() action */
 398 #define DTRACEACT_PRINTA                4       /* printa() action */
 399 #define DTRACEACT_LIBACT                5       /* library-controlled action */
 400 #define DTRACEACT_TRACEMEM              6       /* tracemem() action */
 401 #define DTRACEACT_TRACEMEM_DYNSIZE      7       /* dynamic tracemem() size */
 402 
 403 #define DTRACEACT_PROC                  0x0100
 404 #define DTRACEACT_USTACK                (DTRACEACT_PROC + 1)
 405 #define DTRACEACT_JSTACK                (DTRACEACT_PROC + 2)
 406 #define DTRACEACT_USYM                  (DTRACEACT_PROC + 3)
 407 #define DTRACEACT_UMOD                  (DTRACEACT_PROC + 4)
 408 #define DTRACEACT_UADDR                 (DTRACEACT_PROC + 5)
 409 
 410 #define DTRACEACT_PROC_DESTRUCTIVE      0x0200
 411 #define DTRACEACT_STOP                  (DTRACEACT_PROC_DESTRUCTIVE + 1)
 412 #define DTRACEACT_RAISE                 (DTRACEACT_PROC_DESTRUCTIVE + 2)
 413 #define DTRACEACT_SYSTEM                (DTRACEACT_PROC_DESTRUCTIVE + 3)
 414 #define DTRACEACT_FREOPEN               (DTRACEACT_PROC_DESTRUCTIVE + 4)
 415 
 416 #define DTRACEACT_PROC_CONTROL          0x0300
 417 
 418 #define DTRACEACT_KERNEL                0x0400
 419 #define DTRACEACT_STACK                 (DTRACEACT_KERNEL + 1)
 420 #define DTRACEACT_SYM                   (DTRACEACT_KERNEL + 2)
 421 #define DTRACEACT_MOD                   (DTRACEACT_KERNEL + 3)
 422 
 423 #define DTRACEACT_KERNEL_DESTRUCTIVE    0x0500
 424 #define DTRACEACT_BREAKPOINT            (DTRACEACT_KERNEL_DESTRUCTIVE + 1)
 425 #define DTRACEACT_PANIC                 (DTRACEACT_KERNEL_DESTRUCTIVE + 2)
 426 #define DTRACEACT_CHILL                 (DTRACEACT_KERNEL_DESTRUCTIVE + 3)
 427 
 428 #define DTRACEACT_SPECULATIVE           0x0600
 429 #define DTRACEACT_SPECULATE             (DTRACEACT_SPECULATIVE + 1)
 430 #define DTRACEACT_COMMIT                (DTRACEACT_SPECULATIVE + 2)
 431 #define DTRACEACT_DISCARD               (DTRACEACT_SPECULATIVE + 3)
 432 
 433 #define DTRACEACT_CLASS(x)              ((x) & 0xff00)
 434 
 435 #define DTRACEACT_ISDESTRUCTIVE(x)      \
 436         (DTRACEACT_CLASS(x) == DTRACEACT_PROC_DESTRUCTIVE || \
 437         DTRACEACT_CLASS(x) == DTRACEACT_KERNEL_DESTRUCTIVE)
 438 
 439 #define DTRACEACT_ISSPECULATIVE(x)      \
 440         (DTRACEACT_CLASS(x) == DTRACEACT_SPECULATIVE)
 441 
 442 #define DTRACEACT_ISPRINTFLIKE(x)       \
 443         ((x) == DTRACEACT_PRINTF || (x) == DTRACEACT_PRINTA || \
 444         (x) == DTRACEACT_SYSTEM || (x) == DTRACEACT_FREOPEN)
 445 
 446 /*
 447  * DTrace Aggregating Actions
 448  *
 449  * These are functions f(x) for which the following is true:
 450  *
 451  *    f(f(x_0) U f(x_1) U ... U f(x_n)) = f(x_0 U x_1 U ... U x_n)
 452  *
 453  * where x_n is a set of arbitrary data.  Aggregating actions are in their own
 454  * DTrace action class, DTTRACEACT_AGGREGATION.  The macros provided here allow
 455  * for easier processing of the aggregation argument and data payload for a few
 456  * aggregating actions (notably:  quantize(), lquantize(), and ustack()).
 457  */
 458 #define DTRACEACT_AGGREGATION           0x0700
 459 #define DTRACEAGG_COUNT                 (DTRACEACT_AGGREGATION + 1)
 460 #define DTRACEAGG_MIN                   (DTRACEACT_AGGREGATION + 2)
 461 #define DTRACEAGG_MAX                   (DTRACEACT_AGGREGATION + 3)
 462 #define DTRACEAGG_AVG                   (DTRACEACT_AGGREGATION + 4)
 463 #define DTRACEAGG_SUM                   (DTRACEACT_AGGREGATION + 5)
 464 #define DTRACEAGG_STDDEV                (DTRACEACT_AGGREGATION + 6)
 465 #define DTRACEAGG_QUANTIZE              (DTRACEACT_AGGREGATION + 7)
 466 #define DTRACEAGG_LQUANTIZE             (DTRACEACT_AGGREGATION + 8)
 467 #define DTRACEAGG_LLQUANTIZE            (DTRACEACT_AGGREGATION + 9)
 468 
 469 #define DTRACEACT_ISAGG(x)              \
 470         (DTRACEACT_CLASS(x) == DTRACEACT_AGGREGATION)
 471 
 472 #define DTRACE_QUANTIZE_NBUCKETS        \
 473         (((sizeof (uint64_t) * NBBY) - 1) * 2 + 1)
 474 
 475 #define DTRACE_QUANTIZE_ZEROBUCKET      ((sizeof (uint64_t) * NBBY) - 1)
 476 
 477 #define DTRACE_QUANTIZE_BUCKETVAL(buck)                                 \
 478         (int64_t)((buck) < DTRACE_QUANTIZE_ZEROBUCKET ?                      \
 479         -(1LL << (DTRACE_QUANTIZE_ZEROBUCKET - 1 - (buck))) :             \
 480         (buck) == DTRACE_QUANTIZE_ZEROBUCKET ? 0 :                      \
 481         1LL << ((buck) - DTRACE_QUANTIZE_ZEROBUCKET - 1))
 482 
 483 #define DTRACE_LQUANTIZE_STEPSHIFT              48
 484 #define DTRACE_LQUANTIZE_STEPMASK               ((uint64_t)UINT16_MAX << 48)
 485 #define DTRACE_LQUANTIZE_LEVELSHIFT             32
 486 #define DTRACE_LQUANTIZE_LEVELMASK              ((uint64_t)UINT16_MAX << 32)
 487 #define DTRACE_LQUANTIZE_BASESHIFT              0
 488 #define DTRACE_LQUANTIZE_BASEMASK               UINT32_MAX
 489 
 490 #define DTRACE_LQUANTIZE_STEP(x)                \
 491         (uint16_t)(((x) & DTRACE_LQUANTIZE_STEPMASK) >> \
 492         DTRACE_LQUANTIZE_STEPSHIFT)
 493 
 494 #define DTRACE_LQUANTIZE_LEVELS(x)              \
 495         (uint16_t)(((x) & DTRACE_LQUANTIZE_LEVELMASK) >> \
 496         DTRACE_LQUANTIZE_LEVELSHIFT)
 497 
 498 #define DTRACE_LQUANTIZE_BASE(x)                \
 499         (int32_t)(((x) & DTRACE_LQUANTIZE_BASEMASK) >> \
 500         DTRACE_LQUANTIZE_BASESHIFT)
 501 
 502 #define DTRACE_LLQUANTIZE_FACTORSHIFT           48
 503 #define DTRACE_LLQUANTIZE_FACTORMASK            ((uint64_t)UINT16_MAX << 48)
 504 #define DTRACE_LLQUANTIZE_LOWSHIFT              32
 505 #define DTRACE_LLQUANTIZE_LOWMASK               ((uint64_t)UINT16_MAX << 32)
 506 #define DTRACE_LLQUANTIZE_HIGHSHIFT             16
 507 #define DTRACE_LLQUANTIZE_HIGHMASK              ((uint64_t)UINT16_MAX << 16)
 508 #define DTRACE_LLQUANTIZE_NSTEPSHIFT            0
 509 #define DTRACE_LLQUANTIZE_NSTEPMASK             UINT16_MAX
 510 
 511 #define DTRACE_LLQUANTIZE_FACTOR(x)             \
 512         (uint16_t)(((x) & DTRACE_LLQUANTIZE_FACTORMASK) >> \
 513         DTRACE_LLQUANTIZE_FACTORSHIFT)
 514 
 515 #define DTRACE_LLQUANTIZE_LOW(x)                \
 516         (uint16_t)(((x) & DTRACE_LLQUANTIZE_LOWMASK) >> \
 517         DTRACE_LLQUANTIZE_LOWSHIFT)
 518 
 519 #define DTRACE_LLQUANTIZE_HIGH(x)               \
 520         (uint16_t)(((x) & DTRACE_LLQUANTIZE_HIGHMASK) >> \
 521         DTRACE_LLQUANTIZE_HIGHSHIFT)
 522 
 523 #define DTRACE_LLQUANTIZE_NSTEP(x)              \
 524         (uint16_t)(((x) & DTRACE_LLQUANTIZE_NSTEPMASK) >> \
 525         DTRACE_LLQUANTIZE_NSTEPSHIFT)
 526 
 527 #define DTRACE_USTACK_NFRAMES(x)        (uint32_t)((x) & UINT32_MAX)
 528 #define DTRACE_USTACK_STRSIZE(x)        (uint32_t)((x) >> 32)
 529 #define DTRACE_USTACK_ARG(x, y)         \
 530         ((((uint64_t)(y)) << 32) | ((x) & UINT32_MAX))
 531 
 532 #ifndef _LP64
 533 #ifndef _LITTLE_ENDIAN
 534 #define DTRACE_PTR(type, name)  uint32_t name##pad; type *name
 535 #else
 536 #define DTRACE_PTR(type, name)  type *name; uint32_t name##pad
 537 #endif
 538 #else
 539 #define DTRACE_PTR(type, name)  type *name
 540 #endif
 541 
 542 /*
 543  * DTrace Object Format (DOF)
 544  *
 545  * DTrace programs can be persistently encoded in the DOF format so that they
 546  * may be embedded in other programs (for example, in an ELF file) or in the
 547  * dtrace driver configuration file for use in anonymous tracing.  The DOF
 548  * format is versioned and extensible so that it can be revised and so that
 549  * internal data structures can be modified or extended compatibly.  All DOF
 550  * structures use fixed-size types, so the 32-bit and 64-bit representations
 551  * are identical and consumers can use either data model transparently.
 552  *
 553  * The file layout is structured as follows:
 554  *
 555  * +---------------+-------------------+----- ... ----+---- ... ------+
 556  * |   dof_hdr_t   |  dof_sec_t[ ... ] |   loadable   | non-loadable  |
 557  * | (file header) | (section headers) | section data | section data  |
 558  * +---------------+-------------------+----- ... ----+---- ... ------+
 559  * |<------------ dof_hdr.dofh_loadsz --------------->|               |
 560  * |<------------ dof_hdr.dofh_filesz ------------------------------->|
 561  *
 562  * The file header stores meta-data including a magic number, data model for
 563  * the instrumentation, data encoding, and properties of the DIF code within.
 564  * The header describes its own size and the size of the section headers.  By
 565  * convention, an array of section headers follows the file header, and then
 566  * the data for all loadable sections and unloadable sections.  This permits
 567  * consumer code to easily download the headers and all loadable data into the
 568  * DTrace driver in one contiguous chunk, omitting other extraneous sections.
 569  *
 570  * The section headers describe the size, offset, alignment, and section type
 571  * for each section.  Sections are described using a set of #defines that tell
 572  * the consumer what kind of data is expected.  Sections can contain links to
 573  * other sections by storing a dof_secidx_t, an index into the section header
 574  * array, inside of the section data structures.  The section header includes
 575  * an entry size so that sections with data arrays can grow their structures.
 576  *
 577  * The DOF data itself can contain many snippets of DIF (i.e. >1 DIFOs), which
 578  * are represented themselves as a collection of related DOF sections.  This
 579  * permits us to change the set of sections associated with a DIFO over time,
 580  * and also permits us to encode DIFOs that contain different sets of sections.
 581  * When a DOF section wants to refer to a DIFO, it stores the dof_secidx_t of a
 582  * section of type DOF_SECT_DIFOHDR.  This section's data is then an array of
 583  * dof_secidx_t's which in turn denote the sections associated with this DIFO.
 584  *
 585  * This loose coupling of the file structure (header and sections) to the
 586  * structure of the DTrace program itself (ECB descriptions, action
 587  * descriptions, and DIFOs) permits activities such as relocation processing
 588  * to occur in a single pass without having to understand D program structure.
 589  *
 590  * Finally, strings are always stored in ELF-style string tables along with a
 591  * string table section index and string table offset.  Therefore strings in
 592  * DOF are always arbitrary-length and not bound to the current implementation.
 593  */
 594 
 595 #define DOF_ID_SIZE     16      /* total size of dofh_ident[] in bytes */
 596 
 597 typedef struct dof_hdr {
 598         uint8_t dofh_ident[DOF_ID_SIZE]; /* identification bytes (see below) */
 599         uint32_t dofh_flags;            /* file attribute flags (if any) */
 600         uint32_t dofh_hdrsize;          /* size of file header in bytes */
 601         uint32_t dofh_secsize;          /* size of section header in bytes */
 602         uint32_t dofh_secnum;           /* number of section headers */
 603         uint64_t dofh_secoff;           /* file offset of section headers */
 604         uint64_t dofh_loadsz;           /* file size of loadable portion */
 605         uint64_t dofh_filesz;           /* file size of entire DOF file */
 606         uint64_t dofh_pad;              /* reserved for future use */
 607 } dof_hdr_t;
 608 
 609 #define DOF_ID_MAG0     0       /* first byte of magic number */
 610 #define DOF_ID_MAG1     1       /* second byte of magic number */
 611 #define DOF_ID_MAG2     2       /* third byte of magic number */
 612 #define DOF_ID_MAG3     3       /* fourth byte of magic number */
 613 #define DOF_ID_MODEL    4       /* DOF data model (see below) */
 614 #define DOF_ID_ENCODING 5       /* DOF data encoding (see below) */
 615 #define DOF_ID_VERSION  6       /* DOF file format major version (see below) */
 616 #define DOF_ID_DIFVERS  7       /* DIF instruction set version */
 617 #define DOF_ID_DIFIREG  8       /* DIF integer registers used by compiler */
 618 #define DOF_ID_DIFTREG  9       /* DIF tuple registers used by compiler */
 619 #define DOF_ID_PAD      10      /* start of padding bytes (all zeroes) */
 620 
 621 #define DOF_MAG_MAG0    0x7F    /* DOF_ID_MAG[0-3] */
 622 #define DOF_MAG_MAG1    'D'
 623 #define DOF_MAG_MAG2    'O'
 624 #define DOF_MAG_MAG3    'F'
 625 
 626 #define DOF_MAG_STRING  "\177DOF"
 627 #define DOF_MAG_STRLEN  4
 628 
 629 #define DOF_MODEL_NONE  0       /* DOF_ID_MODEL */
 630 #define DOF_MODEL_ILP32 1
 631 #define DOF_MODEL_LP64  2
 632 
 633 #ifdef _LP64
 634 #define DOF_MODEL_NATIVE        DOF_MODEL_LP64
 635 #else
 636 #define DOF_MODEL_NATIVE        DOF_MODEL_ILP32
 637 #endif
 638 
 639 #define DOF_ENCODE_NONE 0       /* DOF_ID_ENCODING */
 640 #define DOF_ENCODE_LSB  1
 641 #define DOF_ENCODE_MSB  2
 642 
 643 #ifdef _BIG_ENDIAN
 644 #define DOF_ENCODE_NATIVE       DOF_ENCODE_MSB
 645 #else
 646 #define DOF_ENCODE_NATIVE       DOF_ENCODE_LSB
 647 #endif
 648 
 649 #define DOF_VERSION_1   1       /* DOF version 1: Solaris 10 FCS */
 650 #define DOF_VERSION_2   2       /* DOF version 2: Solaris Express 6/06 */
 651 #define DOF_VERSION     DOF_VERSION_2   /* Latest DOF version */
 652 
 653 #define DOF_FL_VALID    0       /* mask of all valid dofh_flags bits */
 654 
 655 typedef uint32_t dof_secidx_t;  /* section header table index type */
 656 typedef uint32_t dof_stridx_t;  /* string table index type */
 657 
 658 #define DOF_SECIDX_NONE (-1U)   /* null value for section indices */
 659 #define DOF_STRIDX_NONE (-1U)   /* null value for string indices */
 660 
 661 typedef struct dof_sec {
 662         uint32_t dofs_type;     /* section type (see below) */
 663         uint32_t dofs_align;    /* section data memory alignment */
 664         uint32_t dofs_flags;    /* section flags (if any) */
 665         uint32_t dofs_entsize;  /* size of section entry (if table) */
 666         uint64_t dofs_offset;   /* offset of section data within file */
 667         uint64_t dofs_size;     /* size of section data in bytes */
 668 } dof_sec_t;
 669 
 670 #define DOF_SECT_NONE           0       /* null section */
 671 #define DOF_SECT_COMMENTS       1       /* compiler comments */
 672 #define DOF_SECT_SOURCE         2       /* D program source code */
 673 #define DOF_SECT_ECBDESC        3       /* dof_ecbdesc_t */
 674 #define DOF_SECT_PROBEDESC      4       /* dof_probedesc_t */
 675 #define DOF_SECT_ACTDESC        5       /* dof_actdesc_t array */
 676 #define DOF_SECT_DIFOHDR        6       /* dof_difohdr_t (variable length) */
 677 #define DOF_SECT_DIF            7       /* uint32_t array of byte code */
 678 #define DOF_SECT_STRTAB         8       /* string table */
 679 #define DOF_SECT_VARTAB         9       /* dtrace_difv_t array */
 680 #define DOF_SECT_RELTAB         10      /* dof_relodesc_t array */
 681 #define DOF_SECT_TYPTAB         11      /* dtrace_diftype_t array */
 682 #define DOF_SECT_URELHDR        12      /* dof_relohdr_t (user relocations) */
 683 #define DOF_SECT_KRELHDR        13      /* dof_relohdr_t (kernel relocations) */
 684 #define DOF_SECT_OPTDESC        14      /* dof_optdesc_t array */
 685 #define DOF_SECT_PROVIDER       15      /* dof_provider_t */
 686 #define DOF_SECT_PROBES         16      /* dof_probe_t array */
 687 #define DOF_SECT_PRARGS         17      /* uint8_t array (probe arg mappings) */
 688 #define DOF_SECT_PROFFS         18      /* uint32_t array (probe arg offsets) */
 689 #define DOF_SECT_INTTAB         19      /* uint64_t array */
 690 #define DOF_SECT_UTSNAME        20      /* struct utsname */
 691 #define DOF_SECT_XLTAB          21      /* dof_xlref_t array */
 692 #define DOF_SECT_XLMEMBERS      22      /* dof_xlmember_t array */
 693 #define DOF_SECT_XLIMPORT       23      /* dof_xlator_t */
 694 #define DOF_SECT_XLEXPORT       24      /* dof_xlator_t */
 695 #define DOF_SECT_PREXPORT       25      /* dof_secidx_t array (exported objs) */
 696 #define DOF_SECT_PRENOFFS       26      /* uint32_t array (enabled offsets) */
 697 
 698 #define DOF_SECF_LOAD           1       /* section should be loaded */
 699 
 700 #define DOF_SEC_ISLOADABLE(x)                                           \
 701         (((x) == DOF_SECT_ECBDESC) || ((x) == DOF_SECT_PROBEDESC) ||    \
 702         ((x) == DOF_SECT_ACTDESC) || ((x) == DOF_SECT_DIFOHDR) ||       \
 703         ((x) == DOF_SECT_DIF) || ((x) == DOF_SECT_STRTAB) ||            \
 704         ((x) == DOF_SECT_VARTAB) || ((x) == DOF_SECT_RELTAB) ||         \
 705         ((x) == DOF_SECT_TYPTAB) || ((x) == DOF_SECT_URELHDR) ||        \
 706         ((x) == DOF_SECT_KRELHDR) || ((x) == DOF_SECT_OPTDESC) ||       \
 707         ((x) == DOF_SECT_PROVIDER) || ((x) == DOF_SECT_PROBES) ||       \
 708         ((x) == DOF_SECT_PRARGS) || ((x) == DOF_SECT_PROFFS) ||         \
 709         ((x) == DOF_SECT_INTTAB) || ((x) == DOF_SECT_XLTAB) ||          \
 710         ((x) == DOF_SECT_XLMEMBERS) || ((x) == DOF_SECT_XLIMPORT) ||    \
 711         ((x) == DOF_SECT_XLIMPORT) || ((x) == DOF_SECT_XLEXPORT) ||     \
 712         ((x) == DOF_SECT_PREXPORT) || ((x) == DOF_SECT_PRENOFFS))
 713 
 714 typedef struct dof_ecbdesc {
 715         dof_secidx_t dofe_probes;       /* link to DOF_SECT_PROBEDESC */
 716         dof_secidx_t dofe_pred;         /* link to DOF_SECT_DIFOHDR */
 717         dof_secidx_t dofe_actions;      /* link to DOF_SECT_ACTDESC */
 718         uint32_t dofe_pad;              /* reserved for future use */
 719         uint64_t dofe_uarg;             /* user-supplied library argument */
 720 } dof_ecbdesc_t;
 721 
 722 typedef struct dof_probedesc {
 723         dof_secidx_t dofp_strtab;       /* link to DOF_SECT_STRTAB section */
 724         dof_stridx_t dofp_provider;     /* provider string */
 725         dof_stridx_t dofp_mod;          /* module string */
 726         dof_stridx_t dofp_func;         /* function string */
 727         dof_stridx_t dofp_name;         /* name string */
 728         uint32_t dofp_id;               /* probe identifier (or zero) */
 729 } dof_probedesc_t;
 730 
 731 typedef struct dof_actdesc {
 732         dof_secidx_t dofa_difo;         /* link to DOF_SECT_DIFOHDR */
 733         dof_secidx_t dofa_strtab;       /* link to DOF_SECT_STRTAB section */
 734         uint32_t dofa_kind;             /* action kind (DTRACEACT_* constant) */
 735         uint32_t dofa_ntuple;           /* number of subsequent tuple actions */
 736         uint64_t dofa_arg;              /* kind-specific argument */
 737         uint64_t dofa_uarg;             /* user-supplied argument */
 738 } dof_actdesc_t;
 739 
 740 typedef struct dof_difohdr {
 741         dtrace_diftype_t dofd_rtype;    /* return type for this fragment */
 742         dof_secidx_t dofd_links[1];     /* variable length array of indices */
 743 } dof_difohdr_t;
 744 
 745 typedef struct dof_relohdr {
 746         dof_secidx_t dofr_strtab;       /* link to DOF_SECT_STRTAB for names */
 747         dof_secidx_t dofr_relsec;       /* link to DOF_SECT_RELTAB for relos */
 748         dof_secidx_t dofr_tgtsec;       /* link to section we are relocating */
 749 } dof_relohdr_t;
 750 
 751 typedef struct dof_relodesc {
 752         dof_stridx_t dofr_name;         /* string name of relocation symbol */
 753         uint32_t dofr_type;             /* relo type (DOF_RELO_* constant) */
 754         uint64_t dofr_offset;           /* byte offset for relocation */
 755         uint64_t dofr_data;             /* additional type-specific data */
 756 } dof_relodesc_t;
 757 
 758 #define DOF_RELO_NONE   0               /* empty relocation entry */
 759 #define DOF_RELO_SETX   1               /* relocate setx value */
 760 
 761 typedef struct dof_optdesc {
 762         uint32_t dofo_option;           /* option identifier */
 763         dof_secidx_t dofo_strtab;       /* string table, if string option */
 764         uint64_t dofo_value;            /* option value or string index */
 765 } dof_optdesc_t;
 766 
 767 typedef uint32_t dof_attr_t;            /* encoded stability attributes */
 768 
 769 #define DOF_ATTR(n, d, c)       (((n) << 24) | ((d) << 16) | ((c) << 8))
 770 #define DOF_ATTR_NAME(a)        (((a) >> 24) & 0xff)
 771 #define DOF_ATTR_DATA(a)        (((a) >> 16) & 0xff)
 772 #define DOF_ATTR_CLASS(a)       (((a) >>  8) & 0xff)
 773 
 774 typedef struct dof_provider {
 775         dof_secidx_t dofpv_strtab;      /* link to DOF_SECT_STRTAB section */
 776         dof_secidx_t dofpv_probes;      /* link to DOF_SECT_PROBES section */
 777         dof_secidx_t dofpv_prargs;      /* link to DOF_SECT_PRARGS section */
 778         dof_secidx_t dofpv_proffs;      /* link to DOF_SECT_PROFFS section */
 779         dof_stridx_t dofpv_name;        /* provider name string */
 780         dof_attr_t dofpv_provattr;      /* provider attributes */
 781         dof_attr_t dofpv_modattr;       /* module attributes */
 782         dof_attr_t dofpv_funcattr;      /* function attributes */
 783         dof_attr_t dofpv_nameattr;      /* name attributes */
 784         dof_attr_t dofpv_argsattr;      /* args attributes */
 785         dof_secidx_t dofpv_prenoffs;    /* link to DOF_SECT_PRENOFFS section */
 786 } dof_provider_t;
 787 
 788 typedef struct dof_probe {
 789         uint64_t dofpr_addr;            /* probe base address or offset */
 790         dof_stridx_t dofpr_func;        /* probe function string */
 791         dof_stridx_t dofpr_name;        /* probe name string */
 792         dof_stridx_t dofpr_nargv;       /* native argument type strings */
 793         dof_stridx_t dofpr_xargv;       /* translated argument type strings */
 794         uint32_t dofpr_argidx;          /* index of first argument mapping */
 795         uint32_t dofpr_offidx;          /* index of first offset entry */
 796         uint8_t dofpr_nargc;            /* native argument count */
 797         uint8_t dofpr_xargc;            /* translated argument count */
 798         uint16_t dofpr_noffs;           /* number of offset entries for probe */
 799         uint32_t dofpr_enoffidx;        /* index of first is-enabled offset */
 800         uint16_t dofpr_nenoffs;         /* number of is-enabled offsets */
 801         uint16_t dofpr_pad1;            /* reserved for future use */
 802         uint32_t dofpr_pad2;            /* reserved for future use */
 803 } dof_probe_t;
 804 
 805 typedef struct dof_xlator {
 806         dof_secidx_t dofxl_members;     /* link to DOF_SECT_XLMEMBERS section */
 807         dof_secidx_t dofxl_strtab;      /* link to DOF_SECT_STRTAB section */
 808         dof_stridx_t dofxl_argv;        /* input parameter type strings */
 809         uint32_t dofxl_argc;            /* input parameter list length */
 810         dof_stridx_t dofxl_type;        /* output type string name */
 811         dof_attr_t dofxl_attr;          /* output stability attributes */
 812 } dof_xlator_t;
 813 
 814 typedef struct dof_xlmember {
 815         dof_secidx_t dofxm_difo;        /* member link to DOF_SECT_DIFOHDR */
 816         dof_stridx_t dofxm_name;        /* member name */
 817         dtrace_diftype_t dofxm_type;    /* member type */
 818 } dof_xlmember_t;
 819 
 820 typedef struct dof_xlref {
 821         dof_secidx_t dofxr_xlator;      /* link to DOF_SECT_XLATORS section */
 822         uint32_t dofxr_member;          /* index of referenced dof_xlmember */
 823         uint32_t dofxr_argn;            /* index of argument for DIF_OP_XLARG */
 824 } dof_xlref_t;
 825 
 826 /*
 827  * DTrace Intermediate Format Object (DIFO)
 828  *
 829  * A DIFO is used to store the compiled DIF for a D expression, its return
 830  * type, and its string and variable tables.  The string table is a single
 831  * buffer of character data into which sets instructions and variable
 832  * references can reference strings using a byte offset.  The variable table
 833  * is an array of dtrace_difv_t structures that describe the name and type of
 834  * each variable and the id used in the DIF code.  This structure is described
 835  * above in the DIF section of this header file.  The DIFO is used at both
 836  * user-level (in the library) and in the kernel, but the structure is never
 837  * passed between the two: the DOF structures form the only interface.  As a
 838  * result, the definition can change depending on the presence of _KERNEL.
 839  */
 840 typedef struct dtrace_difo {
 841         dif_instr_t *dtdo_buf;          /* instruction buffer */
 842         uint64_t *dtdo_inttab;          /* integer table (optional) */
 843         char *dtdo_strtab;              /* string table (optional) */
 844         dtrace_difv_t *dtdo_vartab;     /* variable table (optional) */
 845         uint_t dtdo_len;                /* length of instruction buffer */
 846         uint_t dtdo_intlen;             /* length of integer table */
 847         uint_t dtdo_strlen;             /* length of string table */
 848         uint_t dtdo_varlen;             /* length of variable table */
 849         dtrace_diftype_t dtdo_rtype;    /* return type */
 850         uint_t dtdo_refcnt;             /* owner reference count */
 851         uint_t dtdo_destructive;        /* invokes destructive subroutines */
 852 #ifndef _KERNEL
 853         dof_relodesc_t *dtdo_kreltab;   /* kernel relocations */
 854         dof_relodesc_t *dtdo_ureltab;   /* user relocations */
 855         struct dt_node **dtdo_xlmtab;   /* translator references */
 856         uint_t dtdo_krelen;             /* length of krelo table */
 857         uint_t dtdo_urelen;             /* length of urelo table */
 858         uint_t dtdo_xlmlen;             /* length of translator table */
 859 #endif
 860 } dtrace_difo_t;
 861 
 862 /*
 863  * DTrace Enabling Description Structures
 864  *
 865  * When DTrace is tracking the description of a DTrace enabling entity (probe,
 866  * predicate, action, ECB, record, etc.), it does so in a description
 867  * structure.  These structures all end in "desc", and are used at both
 868  * user-level and in the kernel -- but (with the exception of
 869  * dtrace_probedesc_t) they are never passed between them.  Typically,
 870  * user-level will use the description structures when assembling an enabling.
 871  * It will then distill those description structures into a DOF object (see
 872  * above), and send it into the kernel.  The kernel will again use the
 873  * description structures to create a description of the enabling as it reads
 874  * the DOF.  When the description is complete, the enabling will be actually
 875  * created -- turning it into the structures that represent the enabling
 876  * instead of merely describing it.  Not surprisingly, the description
 877  * structures bear a strong resemblance to the DOF structures that act as their
 878  * conduit.
 879  */
 880 struct dtrace_predicate;
 881 
 882 typedef struct dtrace_probedesc {
 883         dtrace_id_t dtpd_id;                    /* probe identifier */
 884         char dtpd_provider[DTRACE_PROVNAMELEN]; /* probe provider name */
 885         char dtpd_mod[DTRACE_MODNAMELEN];       /* probe module name */
 886         char dtpd_func[DTRACE_FUNCNAMELEN];     /* probe function name */
 887         char dtpd_name[DTRACE_NAMELEN];         /* probe name */
 888 } dtrace_probedesc_t;
 889 
 890 typedef struct dtrace_repldesc {
 891         dtrace_probedesc_t dtrpd_match;         /* probe descr. to match */
 892         dtrace_probedesc_t dtrpd_create;        /* probe descr. to create */
 893 } dtrace_repldesc_t;
 894 
 895 typedef struct dtrace_preddesc {
 896         dtrace_difo_t *dtpdd_difo;              /* pointer to DIF object */
 897         struct dtrace_predicate *dtpdd_predicate; /* pointer to predicate */
 898 } dtrace_preddesc_t;
 899 
 900 typedef struct dtrace_actdesc {
 901         dtrace_difo_t *dtad_difo;               /* pointer to DIF object */
 902         struct dtrace_actdesc *dtad_next;       /* next action */
 903         dtrace_actkind_t dtad_kind;             /* kind of action */
 904         uint32_t dtad_ntuple;                   /* number in tuple */
 905         uint64_t dtad_arg;                      /* action argument */
 906         uint64_t dtad_uarg;                     /* user argument */
 907         int dtad_refcnt;                        /* reference count */
 908 } dtrace_actdesc_t;
 909 
 910 typedef struct dtrace_ecbdesc {
 911         dtrace_actdesc_t *dted_action;          /* action description(s) */
 912         dtrace_preddesc_t dted_pred;            /* predicate description */
 913         dtrace_probedesc_t dted_probe;          /* probe description */
 914         uint64_t dted_uarg;                     /* library argument */
 915         int dted_refcnt;                        /* reference count */
 916 } dtrace_ecbdesc_t;
 917 
 918 /*
 919  * DTrace Metadata Description Structures
 920  *
 921  * DTrace separates the trace data stream from the metadata stream.  The only
 922  * metadata tokens placed in the data stream are enabled probe identifiers
 923  * (EPIDs) or (in the case of aggregations) aggregation identifiers.  In order
 924  * to determine the structure of the data, DTrace consumers pass the token to
 925  * the kernel, and receive in return a corresponding description of the enabled
 926  * probe (via the dtrace_eprobedesc structure) or the aggregation (via the
 927  * dtrace_aggdesc structure).  Both of these structures are expressed in terms
 928  * of record descriptions (via the dtrace_recdesc structure) that describe the
 929  * exact structure of the data.  Some record descriptions may also contain a
 930  * format identifier; this additional bit of metadata can be retrieved from the
 931  * kernel, for which a format description is returned via the dtrace_fmtdesc
 932  * structure.  Note that all four of these structures must be bitness-neutral
 933  * to allow for a 32-bit DTrace consumer on a 64-bit kernel.
 934  */
 935 typedef struct dtrace_recdesc {
 936         dtrace_actkind_t dtrd_action;           /* kind of action */
 937         uint32_t dtrd_size;                     /* size of record */
 938         uint32_t dtrd_offset;                   /* offset in ECB's data */
 939         uint16_t dtrd_alignment;                /* required alignment */
 940         uint16_t dtrd_format;                   /* format, if any */
 941         uint64_t dtrd_arg;                      /* action argument */
 942         uint64_t dtrd_uarg;                     /* user argument */
 943 } dtrace_recdesc_t;
 944 
 945 typedef struct dtrace_eprobedesc {
 946         dtrace_epid_t dtepd_epid;               /* enabled probe ID */
 947         dtrace_id_t dtepd_probeid;              /* probe ID */
 948         uint64_t dtepd_uarg;                    /* library argument */
 949         uint32_t dtepd_size;                    /* total size */
 950         int dtepd_nrecs;                        /* number of records */
 951         dtrace_recdesc_t dtepd_rec[1];          /* records themselves */
 952 } dtrace_eprobedesc_t;
 953 
 954 typedef struct dtrace_aggdesc {
 955         DTRACE_PTR(char, dtagd_name);           /* not filled in by kernel */
 956         dtrace_aggvarid_t dtagd_varid;          /* not filled in by kernel */
 957         int dtagd_flags;                        /* not filled in by kernel */
 958         dtrace_aggid_t dtagd_id;                /* aggregation ID */
 959         dtrace_epid_t dtagd_epid;               /* enabled probe ID */
 960         uint32_t dtagd_size;                    /* size in bytes */
 961         int dtagd_nrecs;                        /* number of records */
 962         uint32_t dtagd_pad;                     /* explicit padding */
 963         dtrace_recdesc_t dtagd_rec[1];          /* record descriptions */
 964 } dtrace_aggdesc_t;
 965 
 966 typedef struct dtrace_fmtdesc {
 967         DTRACE_PTR(char, dtfd_string);          /* format string */
 968         int dtfd_length;                        /* length of format string */
 969         uint16_t dtfd_format;                   /* format identifier */
 970 } dtrace_fmtdesc_t;
 971 
 972 #define DTRACE_SIZEOF_EPROBEDESC(desc)                          \
 973         (sizeof (dtrace_eprobedesc_t) + ((desc)->dtepd_nrecs ?       \
 974         (((desc)->dtepd_nrecs - 1) * sizeof (dtrace_recdesc_t)) : 0))
 975 
 976 #define DTRACE_SIZEOF_AGGDESC(desc)                             \
 977         (sizeof (dtrace_aggdesc_t) + ((desc)->dtagd_nrecs ?  \
 978         (((desc)->dtagd_nrecs - 1) * sizeof (dtrace_recdesc_t)) : 0))
 979 
 980 /*
 981  * DTrace Option Interface
 982  *
 983  * Run-time DTrace options are set and retrieved via DOF_SECT_OPTDESC sections
 984  * in a DOF image.  The dof_optdesc structure contains an option identifier and
 985  * an option value.  The valid option identifiers are found below; the mapping
 986  * between option identifiers and option identifying strings is maintained at
 987  * user-level.  Note that the value of DTRACEOPT_UNSET is such that all of the
 988  * following are potentially valid option values:  all positive integers, zero
 989  * and negative one.  Some options (notably "bufpolicy" and "bufresize") take
 990  * predefined tokens as their values; these are defined with
 991  * DTRACEOPT_{option}_{token}.
 992  */
 993 #define DTRACEOPT_BUFSIZE       0       /* buffer size */
 994 #define DTRACEOPT_BUFPOLICY     1       /* buffer policy */
 995 #define DTRACEOPT_DYNVARSIZE    2       /* dynamic variable size */
 996 #define DTRACEOPT_AGGSIZE       3       /* aggregation size */
 997 #define DTRACEOPT_SPECSIZE      4       /* speculation size */
 998 #define DTRACEOPT_NSPEC         5       /* number of speculations */
 999 #define DTRACEOPT_STRSIZE       6       /* string size */
1000 #define DTRACEOPT_CLEANRATE     7       /* dynvar cleaning rate */
1001 #define DTRACEOPT_CPU           8       /* CPU to trace */
1002 #define DTRACEOPT_BUFRESIZE     9       /* buffer resizing policy */
1003 #define DTRACEOPT_GRABANON      10      /* grab anonymous state, if any */
1004 #define DTRACEOPT_FLOWINDENT    11      /* indent function entry/return */
1005 #define DTRACEOPT_QUIET         12      /* only output explicitly traced data */
1006 #define DTRACEOPT_STACKFRAMES   13      /* number of stack frames */
1007 #define DTRACEOPT_USTACKFRAMES  14      /* number of user stack frames */
1008 #define DTRACEOPT_AGGRATE       15      /* aggregation snapshot rate */
1009 #define DTRACEOPT_SWITCHRATE    16      /* buffer switching rate */
1010 #define DTRACEOPT_STATUSRATE    17      /* status rate */
1011 #define DTRACEOPT_DESTRUCTIVE   18      /* destructive actions allowed */
1012 #define DTRACEOPT_STACKINDENT   19      /* output indent for stack traces */
1013 #define DTRACEOPT_RAWBYTES      20      /* always print bytes in raw form */
1014 #define DTRACEOPT_JSTACKFRAMES  21      /* number of jstack() frames */
1015 #define DTRACEOPT_JSTACKSTRSIZE 22      /* size of jstack() string table */
1016 #define DTRACEOPT_AGGSORTKEY    23      /* sort aggregations by key */
1017 #define DTRACEOPT_AGGSORTREV    24      /* reverse-sort aggregations */
1018 #define DTRACEOPT_AGGSORTPOS    25      /* agg. position to sort on */
1019 #define DTRACEOPT_AGGSORTKEYPOS 26      /* agg. key position to sort on */
1020 #define DTRACEOPT_MAX           27      /* number of options */
1021 
1022 #define DTRACEOPT_UNSET         (dtrace_optval_t)-2     /* unset option */
1023 
1024 #define DTRACEOPT_BUFPOLICY_RING        0       /* ring buffer */
1025 #define DTRACEOPT_BUFPOLICY_FILL        1       /* fill buffer, then stop */
1026 #define DTRACEOPT_BUFPOLICY_SWITCH      2       /* switch buffers */
1027 
1028 #define DTRACEOPT_BUFRESIZE_AUTO        0       /* automatic resizing */
1029 #define DTRACEOPT_BUFRESIZE_MANUAL      1       /* manual resizing */
1030 
1031 /*
1032  * DTrace Buffer Interface
1033  *
1034  * In order to get a snapshot of the principal or aggregation buffer,
1035  * user-level passes a buffer description to the kernel with the dtrace_bufdesc
1036  * structure.  This describes which CPU user-level is interested in, and
1037  * where user-level wishes the kernel to snapshot the buffer to (the
1038  * dtbd_data field).  The kernel uses the same structure to pass back some
1039  * information regarding the buffer:  the size of data actually copied out, the
1040  * number of drops, the number of errors, and the offset of the oldest record.
1041  * If the buffer policy is a "switch" policy, taking a snapshot of the
1042  * principal buffer has the additional effect of switching the active and
1043  * inactive buffers.  Taking a snapshot of the aggregation buffer _always_ has
1044  * the additional effect of switching the active and inactive buffers.
1045  */
1046 typedef struct dtrace_bufdesc {
1047         uint64_t dtbd_size;                     /* size of buffer */
1048         uint32_t dtbd_cpu;                      /* CPU or DTRACE_CPUALL */
1049         uint32_t dtbd_errors;                   /* number of errors */
1050         uint64_t dtbd_drops;                    /* number of drops */
1051         DTRACE_PTR(char, dtbd_data);            /* data */
1052         uint64_t dtbd_oldest;                   /* offset of oldest record */
1053 } dtrace_bufdesc_t;
1054 
1055 /*
1056  * DTrace Status
1057  *
1058  * The status of DTrace is relayed via the dtrace_status structure.  This
1059  * structure contains members to count drops other than the capacity drops
1060  * available via the buffer interface (see above).  This consists of dynamic
1061  * drops (including capacity dynamic drops, rinsing drops and dirty drops), and
1062  * speculative drops (including capacity speculative drops, drops due to busy
1063  * speculative buffers and drops due to unavailable speculative buffers).
1064  * Additionally, the status structure contains a field to indicate the number
1065  * of "fill"-policy buffers have been filled and a boolean field to indicate
1066  * that exit() has been called.  If the dtst_exiting field is non-zero, no
1067  * further data will be generated until tracing is stopped (at which time any
1068  * enablings of the END action will be processed); if user-level sees that
1069  * this field is non-zero, tracing should be stopped as soon as possible.
1070  */
1071 typedef struct dtrace_status {
1072         uint64_t dtst_dyndrops;                 /* dynamic drops */
1073         uint64_t dtst_dyndrops_rinsing;         /* dyn drops due to rinsing */
1074         uint64_t dtst_dyndrops_dirty;           /* dyn drops due to dirty */
1075         uint64_t dtst_specdrops;                /* speculative drops */
1076         uint64_t dtst_specdrops_busy;           /* spec drops due to busy */
1077         uint64_t dtst_specdrops_unavail;        /* spec drops due to unavail */
1078         uint64_t dtst_errors;                   /* total errors */
1079         uint64_t dtst_filled;                   /* number of filled bufs */
1080         uint64_t dtst_stkstroverflows;          /* stack string tab overflows */
1081         uint64_t dtst_dblerrors;                /* errors in ERROR probes */
1082         char dtst_killed;                       /* non-zero if killed */
1083         char dtst_exiting;                      /* non-zero if exit() called */
1084         char dtst_pad[6];                       /* pad out to 64-bit align */
1085 } dtrace_status_t;
1086 
1087 /*
1088  * DTrace Configuration
1089  *
1090  * User-level may need to understand some elements of the kernel DTrace
1091  * configuration in order to generate correct DIF.  This information is
1092  * conveyed via the dtrace_conf structure.
1093  */
1094 typedef struct dtrace_conf {
1095         uint_t dtc_difversion;                  /* supported DIF version */
1096         uint_t dtc_difintregs;                  /* # of DIF integer registers */
1097         uint_t dtc_diftupregs;                  /* # of DIF tuple registers */
1098         uint_t dtc_ctfmodel;                    /* CTF data model */
1099         uint_t dtc_pad[8];                      /* reserved for future use */
1100 } dtrace_conf_t;
1101 
1102 /*
1103  * DTrace Faults
1104  *
1105  * The constants below DTRACEFLT_LIBRARY indicate probe processing faults;
1106  * constants at or above DTRACEFLT_LIBRARY indicate faults in probe
1107  * postprocessing at user-level.  Probe processing faults induce an ERROR
1108  * probe and are replicated in unistd.d to allow users' ERROR probes to decode
1109  * the error condition using thse symbolic labels.
1110  */
1111 #define DTRACEFLT_UNKNOWN               0       /* Unknown fault */
1112 #define DTRACEFLT_BADADDR               1       /* Bad address */
1113 #define DTRACEFLT_BADALIGN              2       /* Bad alignment */
1114 #define DTRACEFLT_ILLOP                 3       /* Illegal operation */
1115 #define DTRACEFLT_DIVZERO               4       /* Divide-by-zero */
1116 #define DTRACEFLT_NOSCRATCH             5       /* Out of scratch space */
1117 #define DTRACEFLT_KPRIV                 6       /* Illegal kernel access */
1118 #define DTRACEFLT_UPRIV                 7       /* Illegal user access */
1119 #define DTRACEFLT_TUPOFLOW              8       /* Tuple stack overflow */
1120 #define DTRACEFLT_BADSTACK              9       /* Bad stack */
1121 
1122 #define DTRACEFLT_LIBRARY               1000    /* Library-level fault */
1123 
1124 /*
1125  * DTrace Argument Types
1126  *
1127  * Because it would waste both space and time, argument types do not reside
1128  * with the probe.  In order to determine argument types for args[X]
1129  * variables, the D compiler queries for argument types on a probe-by-probe
1130  * basis.  (This optimizes for the common case that arguments are either not
1131  * used or used in an untyped fashion.)  Typed arguments are specified with a
1132  * string of the type name in the dtragd_native member of the argument
1133  * description structure.  Typed arguments may be further translated to types
1134  * of greater stability; the provider indicates such a translated argument by
1135  * filling in the dtargd_xlate member with the string of the translated type.
1136  * Finally, the provider may indicate which argument value a given argument
1137  * maps to by setting the dtargd_mapping member -- allowing a single argument
1138  * to map to multiple args[X] variables.
1139  */
1140 typedef struct dtrace_argdesc {
1141         dtrace_id_t dtargd_id;                  /* probe identifier */
1142         int dtargd_ndx;                         /* arg number (-1 iff none) */
1143         int dtargd_mapping;                     /* value mapping */
1144         char dtargd_native[DTRACE_ARGTYPELEN];  /* native type name */
1145         char dtargd_xlate[DTRACE_ARGTYPELEN];   /* translated type name */
1146 } dtrace_argdesc_t;
1147 
1148 /*
1149  * DTrace Stability Attributes
1150  *
1151  * Each DTrace provider advertises the name and data stability of each of its
1152  * probe description components, as well as its architectural dependencies.
1153  * The D compiler can query the provider attributes (dtrace_pattr_t below) in
1154  * order to compute the properties of an input program and report them.
1155  */
1156 typedef uint8_t dtrace_stability_t;     /* stability code (see attributes(5)) */
1157 typedef uint8_t dtrace_class_t;         /* architectural dependency class */
1158 
1159 #define DTRACE_STABILITY_INTERNAL       0       /* private to DTrace itself */
1160 #define DTRACE_STABILITY_PRIVATE        1       /* private to Sun (see docs) */
1161 #define DTRACE_STABILITY_OBSOLETE       2       /* scheduled for removal */
1162 #define DTRACE_STABILITY_EXTERNAL       3       /* not controlled by Sun */
1163 #define DTRACE_STABILITY_UNSTABLE       4       /* new or rapidly changing */
1164 #define DTRACE_STABILITY_EVOLVING       5       /* less rapidly changing */
1165 #define DTRACE_STABILITY_STABLE         6       /* mature interface from Sun */
1166 #define DTRACE_STABILITY_STANDARD       7       /* industry standard */
1167 #define DTRACE_STABILITY_MAX            7       /* maximum valid stability */
1168 
1169 #define DTRACE_CLASS_UNKNOWN    0       /* unknown architectural dependency */
1170 #define DTRACE_CLASS_CPU        1       /* CPU-module-specific */
1171 #define DTRACE_CLASS_PLATFORM   2       /* platform-specific (uname -i) */
1172 #define DTRACE_CLASS_GROUP      3       /* hardware-group-specific (uname -m) */
1173 #define DTRACE_CLASS_ISA        4       /* ISA-specific (uname -p) */
1174 #define DTRACE_CLASS_COMMON     5       /* common to all systems */
1175 #define DTRACE_CLASS_MAX        5       /* maximum valid class */
1176 
1177 #define DTRACE_PRIV_NONE        0x0000
1178 #define DTRACE_PRIV_KERNEL      0x0001
1179 #define DTRACE_PRIV_USER        0x0002
1180 #define DTRACE_PRIV_PROC        0x0004
1181 #define DTRACE_PRIV_OWNER       0x0008
1182 #define DTRACE_PRIV_ZONEOWNER   0x0010
1183 
1184 #define DTRACE_PRIV_ALL \
1185         (DTRACE_PRIV_KERNEL | DTRACE_PRIV_USER | \
1186         DTRACE_PRIV_PROC | DTRACE_PRIV_OWNER | DTRACE_PRIV_ZONEOWNER)
1187 
1188 typedef struct dtrace_ppriv {
1189         uint32_t dtpp_flags;                    /* privilege flags */
1190         uid_t dtpp_uid;                         /* user ID */
1191         zoneid_t dtpp_zoneid;                   /* zone ID */
1192 } dtrace_ppriv_t;
1193 
1194 typedef struct dtrace_attribute {
1195         dtrace_stability_t dtat_name;           /* entity name stability */
1196         dtrace_stability_t dtat_data;           /* entity data stability */
1197         dtrace_class_t dtat_class;              /* entity data dependency */
1198 } dtrace_attribute_t;
1199 
1200 typedef struct dtrace_pattr {
1201         dtrace_attribute_t dtpa_provider;       /* provider attributes */
1202         dtrace_attribute_t dtpa_mod;            /* module attributes */
1203         dtrace_attribute_t dtpa_func;           /* function attributes */
1204         dtrace_attribute_t dtpa_name;           /* name attributes */
1205         dtrace_attribute_t dtpa_args;           /* args[] attributes */
1206 } dtrace_pattr_t;
1207 
1208 typedef struct dtrace_providerdesc {
1209         char dtvd_name[DTRACE_PROVNAMELEN];     /* provider name */
1210         dtrace_pattr_t dtvd_attr;               /* stability attributes */
1211         dtrace_ppriv_t dtvd_priv;               /* privileges required */
1212 } dtrace_providerdesc_t;
1213 
1214 /*
1215  * DTrace Pseudodevice Interface
1216  *
1217  * DTrace is controlled through ioctl(2)'s to the in-kernel dtrace:dtrace
1218  * pseudodevice driver.  These ioctls comprise the user-kernel interface to
1219  * DTrace.
1220  */
1221 #define DTRACEIOC               (('d' << 24) | ('t' << 16) | ('r' << 8))
1222 #define DTRACEIOC_PROVIDER      (DTRACEIOC | 1)         /* provider query */
1223 #define DTRACEIOC_PROBES        (DTRACEIOC | 2)         /* probe query */
1224 #define DTRACEIOC_BUFSNAP       (DTRACEIOC | 4)         /* snapshot buffer */
1225 #define DTRACEIOC_PROBEMATCH    (DTRACEIOC | 5)         /* match probes */
1226 #define DTRACEIOC_ENABLE        (DTRACEIOC | 6)         /* enable probes */
1227 #define DTRACEIOC_AGGSNAP       (DTRACEIOC | 7)         /* snapshot agg. */
1228 #define DTRACEIOC_EPROBE        (DTRACEIOC | 8)         /* get eprobe desc. */
1229 #define DTRACEIOC_PROBEARG      (DTRACEIOC | 9)         /* get probe arg */
1230 #define DTRACEIOC_CONF          (DTRACEIOC | 10)        /* get config. */
1231 #define DTRACEIOC_STATUS        (DTRACEIOC | 11)        /* get status */
1232 #define DTRACEIOC_GO            (DTRACEIOC | 12)        /* start tracing */
1233 #define DTRACEIOC_STOP          (DTRACEIOC | 13)        /* stop tracing */
1234 #define DTRACEIOC_AGGDESC       (DTRACEIOC | 15)        /* get agg. desc. */
1235 #define DTRACEIOC_FORMAT        (DTRACEIOC | 16)        /* get format str */
1236 #define DTRACEIOC_DOFGET        (DTRACEIOC | 17)        /* get DOF */
1237 #define DTRACEIOC_REPLICATE     (DTRACEIOC | 18)        /* replicate enab */
1238 
1239 /*
1240  * DTrace Helpers
1241  *
1242  * In general, DTrace establishes probes in processes and takes actions on
1243  * processes without knowing their specific user-level structures.  Instead of
1244  * existing in the framework, process-specific knowledge is contained by the
1245  * enabling D program -- which can apply process-specific knowledge by making
1246  * appropriate use of DTrace primitives like copyin() and copyinstr() to
1247  * operate on user-level data.  However, there may exist some specific probes
1248  * of particular semantic relevance that the application developer may wish to
1249  * explicitly export.  For example, an application may wish to export a probe
1250  * at the point that it begins and ends certain well-defined transactions.  In
1251  * addition to providing probes, programs may wish to offer assistance for
1252  * certain actions.  For example, in highly dynamic environments (e.g., Java),
1253  * it may be difficult to obtain a stack trace in terms of meaningful symbol
1254  * names (the translation from instruction addresses to corresponding symbol
1255  * names may only be possible in situ); these environments may wish to define
1256  * a series of actions to be applied in situ to obtain a meaningful stack
1257  * trace.
1258  *
1259  * These two mechanisms -- user-level statically defined tracing and assisting
1260  * DTrace actions -- are provided via DTrace _helpers_.  Helpers are specified
1261  * via DOF, but unlike enabling DOF, helper DOF may contain definitions of
1262  * providers, probes and their arguments.  If a helper wishes to provide
1263  * action assistance, probe descriptions and corresponding DIF actions may be
1264  * specified in the helper DOF.  For such helper actions, however, the probe
1265  * description describes the specific helper:  all DTrace helpers have the
1266  * provider name "dtrace" and the module name "helper", and the name of the
1267  * helper is contained in the function name (for example, the ustack() helper
1268  * is named "ustack").  Any helper-specific name may be contained in the name
1269  * (for example, if a helper were to have a constructor, it might be named
1270  * "dtrace:helper:<helper>:init").  Helper actions are only called when the
1271  * action that they are helping is taken.  Helper actions may only return DIF
1272  * expressions, and may only call the following subroutines:
1273  *
1274  *    alloca()      <= Allocates memory out of the consumer's scratch space
1275  *    bcopy()       <= Copies memory to scratch space
1276  *    copyin()      <= Copies memory from user-level into consumer's scratch
1277  *    copyinto()    <= Copies memory into a specific location in scratch
1278  *    copyinstr()   <= Copies a string into a specific location in scratch
1279  *
1280  * Helper actions may only access the following built-in variables:
1281  *
1282  *    curthread     <= Current kthread_t pointer
1283  *    tid           <= Current thread identifier
1284  *    pid           <= Current process identifier
1285  *    ppid          <= Parent process identifier
1286  *    uid           <= Current user ID
1287  *    gid           <= Current group ID
1288  *    execname      <= Current executable name
1289  *    zonename      <= Current zone name
1290  *
1291  * Helper actions may not manipulate or allocate dynamic variables, but they
1292  * may have clause-local and statically-allocated global variables.  The
1293  * helper action variable state is specific to the helper action -- variables
1294  * used by the helper action may not be accessed outside of the helper
1295  * action, and the helper action may not access variables that like outside
1296  * of it.  Helper actions may not load from kernel memory at-large; they are
1297  * restricting to loading current user state (via copyin() and variants) and
1298  * scratch space.  As with probe enablings, helper actions are executed in
1299  * program order.  The result of the helper action is the result of the last
1300  * executing helper expression.
1301  *
1302  * Helpers -- composed of either providers/probes or probes/actions (or both)
1303  * -- are added by opening the "helper" minor node, and issuing an ioctl(2)
1304  * (DTRACEHIOC_ADDDOF) that specifies the dof_helper_t structure. This
1305  * encapsulates the name and base address of the user-level library or
1306  * executable publishing the helpers and probes as well as the DOF that
1307  * contains the definitions of those helpers and probes.
1308  *
1309  * The DTRACEHIOC_ADD and DTRACEHIOC_REMOVE are left in place for legacy
1310  * helpers and should no longer be used.  No other ioctls are valid on the
1311  * helper minor node.
1312  */
1313 #define DTRACEHIOC              (('d' << 24) | ('t' << 16) | ('h' << 8))
1314 #define DTRACEHIOC_ADD          (DTRACEHIOC | 1)        /* add helper */
1315 #define DTRACEHIOC_REMOVE       (DTRACEHIOC | 2)        /* remove helper */
1316 #define DTRACEHIOC_ADDDOF       (DTRACEHIOC | 3)        /* add helper DOF */
1317 
1318 typedef struct dof_helper {
1319         char dofhp_mod[DTRACE_MODNAMELEN];      /* executable or library name */
1320         uint64_t dofhp_addr;                    /* base address of object */
1321         uint64_t dofhp_dof;                     /* address of helper DOF */
1322 } dof_helper_t;
1323 
1324 #define DTRACEMNR_DTRACE        "dtrace"        /* node for DTrace ops */
1325 #define DTRACEMNR_HELPER        "helper"        /* node for helpers */
1326 #define DTRACEMNRN_DTRACE       0               /* minor for DTrace ops */
1327 #define DTRACEMNRN_HELPER       1               /* minor for helpers */
1328 #define DTRACEMNRN_CLONE        2               /* first clone minor */
1329 
1330 #ifdef _KERNEL
1331 
1332 /*
1333  * DTrace Provider API
1334  *
1335  * The following functions are implemented by the DTrace framework and are
1336  * used to implement separate in-kernel DTrace providers.  Common functions
1337  * are provided in uts/common/os/dtrace.c.  ISA-dependent subroutines are
1338  * defined in uts/<isa>/dtrace/dtrace_asm.s or uts/<isa>/dtrace/dtrace_isa.c.
1339  *
1340  * The provider API has two halves:  the API that the providers consume from
1341  * DTrace, and the API that providers make available to DTrace.
1342  *
1343  * 1 Framework-to-Provider API
1344  *
1345  * 1.1  Overview
1346  *
1347  * The Framework-to-Provider API is represented by the dtrace_pops structure
1348  * that the provider passes to the framework when registering itself.  This
1349  * structure consists of the following members:
1350  *
1351  *   dtps_provide()          <-- Provide all probes, all modules
1352  *   dtps_provide_module()   <-- Provide all probes in specified module
1353  *   dtps_enable()           <-- Enable specified probe
1354  *   dtps_disable()          <-- Disable specified probe
1355  *   dtps_suspend()          <-- Suspend specified probe
1356  *   dtps_resume()           <-- Resume specified probe
1357  *   dtps_getargdesc()       <-- Get the argument description for args[X]
1358  *   dtps_getargval()        <-- Get the value for an argX or args[X] variable
1359  *   dtps_mode()             <-- Return the mode of the fired probe
1360  *   dtps_destroy()          <-- Destroy all state associated with this probe
1361  *
1362  * 1.2  void dtps_provide(void *arg, const dtrace_probedesc_t *spec)
1363  *
1364  * 1.2.1  Overview
1365  *
1366  *   Called to indicate that the provider should provide all probes.  If the
1367  *   specified description is non-NULL, dtps_provide() is being called because
1368  *   no probe matched a specified probe -- if the provider has the ability to
1369  *   create custom probes, it may wish to create a probe that matches the
1370  *   specified description.
1371  *
1372  * 1.2.2  Arguments and notes
1373  *
1374  *   The first argument is the cookie as passed to dtrace_register().  The
1375  *   second argument is a pointer to a probe description that the provider may
1376  *   wish to consider when creating custom probes.  The provider is expected to
1377  *   call back into the DTrace framework via dtrace_probe_create() to create
1378  *   any necessary probes.  dtps_provide() may be called even if the provider
1379  *   has made available all probes; the provider should check the return value
1380  *   of dtrace_probe_create() to handle this case.  Note that the provider need
1381  *   not implement both dtps_provide() and dtps_provide_module(); see
1382  *   "Arguments and Notes" for dtrace_register(), below.
1383  *
1384  * 1.2.3  Return value
1385  *
1386  *   None.
1387  *
1388  * 1.2.4  Caller's context
1389  *
1390  *   dtps_provide() is typically called from open() or ioctl() context, but may
1391  *   be called from other contexts as well.  The DTrace framework is locked in
1392  *   such a way that providers may not register or unregister.  This means that
1393  *   the provider may not call any DTrace API that affects its registration with
1394  *   the framework, including dtrace_register(), dtrace_unregister(),
1395  *   dtrace_invalidate(), and dtrace_condense().  However, the context is such
1396  *   that the provider may (and indeed, is expected to) call probe-related
1397  *   DTrace routines, including dtrace_probe_create(), dtrace_probe_lookup(),
1398  *   and dtrace_probe_arg().
1399  *
1400  * 1.3  void dtps_provide_module(void *arg, struct modctl *mp)
1401  *
1402  * 1.3.1  Overview
1403  *
1404  *   Called to indicate that the provider should provide all probes in the
1405  *   specified module.
1406  *
1407  * 1.3.2  Arguments and notes
1408  *
1409  *   The first argument is the cookie as passed to dtrace_register().  The
1410  *   second argument is a pointer to a modctl structure that indicates the
1411  *   module for which probes should be created.
1412  *
1413  * 1.3.3  Return value
1414  *
1415  *   None.
1416  *
1417  * 1.3.4  Caller's context
1418  *
1419  *   dtps_provide_module() may be called from open() or ioctl() context, but
1420  *   may also be called from a module loading context.  mod_lock is held, and
1421  *   the DTrace framework is locked in such a way that providers may not
1422  *   register or unregister.  This means that the provider may not call any
1423  *   DTrace API that affects its registration with the framework, including
1424  *   dtrace_register(), dtrace_unregister(), dtrace_invalidate(), and
1425  *   dtrace_condense().  However, the context is such that the provider may (and
1426  *   indeed, is expected to) call probe-related DTrace routines, including
1427  *   dtrace_probe_create(), dtrace_probe_lookup(), and dtrace_probe_arg().  Note
1428  *   that the provider need not implement both dtps_provide() and
1429  *   dtps_provide_module(); see "Arguments and Notes" for dtrace_register(),
1430  *   below.
1431  *
1432  * 1.4  int dtps_enable(void *arg, dtrace_id_t id, void *parg)
1433  *
1434  * 1.4.1  Overview
1435  *
1436  *   Called to enable the specified probe.
1437  *
1438  * 1.4.2  Arguments and notes
1439  *
1440  *   The first argument is the cookie as passed to dtrace_register().  The
1441  *   second argument is the identifier of the probe to be enabled.  The third
1442  *   argument is the probe argument as passed to dtrace_probe_create().
1443  *   dtps_enable() will be called when a probe transitions from not being
1444  *   enabled at all to having one or more ECB.  The number of ECBs associated
1445  *   with the probe may change without subsequent calls into the provider.
1446  *   When the number of ECBs drops to zero, the provider will be explicitly
1447  *   told to disable the probe via dtps_disable().  dtrace_probe() should never
1448  *   be called for a probe identifier that hasn't been explicitly enabled via
1449  *   dtps_enable().
1450  *
1451  * 1.4.3  Return value
1452  *
1453  *   On success, dtps_enable() should return 0. On failure, -1 should be
1454  *   returned.
1455  *
1456  * 1.4.4  Caller's context
1457  *
1458  *   The DTrace framework is locked in such a way that it may not be called
1459  *   back into at all.  cpu_lock is held.  mod_lock is not held and may not
1460  *   be acquired.
1461  *
1462  * 1.5  void dtps_disable(void *arg, dtrace_id_t id, void *parg)
1463  *
1464  * 1.5.1  Overview
1465  *
1466  *   Called to disable the specified probe.
1467  *
1468  * 1.5.2  Arguments and notes
1469  *
1470  *   The first argument is the cookie as passed to dtrace_register().  The
1471  *   second argument is the identifier of the probe to be disabled.  The third
1472  *   argument is the probe argument as passed to dtrace_probe_create().
1473  *   dtps_disable() will be called when a probe transitions from being enabled
1474  *   to having zero ECBs.  dtrace_probe() should never be called for a probe
1475  *   identifier that has been explicitly enabled via dtps_disable().
1476  *
1477  * 1.5.3  Return value
1478  *
1479  *   None.
1480  *
1481  * 1.5.4  Caller's context
1482  *
1483  *   The DTrace framework is locked in such a way that it may not be called
1484  *   back into at all.  cpu_lock is held.  mod_lock is not held and may not
1485  *   be acquired.
1486  *
1487  * 1.6  void dtps_suspend(void *arg, dtrace_id_t id, void *parg)
1488  *
1489  * 1.6.1  Overview
1490  *
1491  *   Called to suspend the specified enabled probe.  This entry point is for
1492  *   providers that may need to suspend some or all of their probes when CPUs
1493  *   are being powered on or when the boot monitor is being entered for a
1494  *   prolonged period of time.
1495  *
1496  * 1.6.2  Arguments and notes
1497  *
1498  *   The first argument is the cookie as passed to dtrace_register().  The
1499  *   second argument is the identifier of the probe to be suspended.  The
1500  *   third argument is the probe argument as passed to dtrace_probe_create().
1501  *   dtps_suspend will only be called on an enabled probe.  Providers that
1502  *   provide a dtps_suspend entry point will want to take roughly the action
1503  *   that it takes for dtps_disable.
1504  *
1505  * 1.6.3  Return value
1506  *
1507  *   None.
1508  *
1509  * 1.6.4  Caller's context
1510  *
1511  *   Interrupts are disabled.  The DTrace framework is in a state such that the
1512  *   specified probe cannot be disabled or destroyed for the duration of
1513  *   dtps_suspend().  As interrupts are disabled, the provider is afforded
1514  *   little latitude; the provider is expected to do no more than a store to
1515  *   memory.
1516  *
1517  * 1.7  void dtps_resume(void *arg, dtrace_id_t id, void *parg)
1518  *
1519  * 1.7.1  Overview
1520  *
1521  *   Called to resume the specified enabled probe.  This entry point is for
1522  *   providers that may need to resume some or all of their probes after the
1523  *   completion of an event that induced a call to dtps_suspend().
1524  *
1525  * 1.7.2  Arguments and notes
1526  *
1527  *   The first argument is the cookie as passed to dtrace_register().  The
1528  *   second argument is the identifier of the probe to be resumed.  The
1529  *   third argument is the probe argument as passed to dtrace_probe_create().
1530  *   dtps_resume will only be called on an enabled probe.  Providers that
1531  *   provide a dtps_resume entry point will want to take roughly the action
1532  *   that it takes for dtps_enable.
1533  *
1534  * 1.7.3  Return value
1535  *
1536  *   None.
1537  *
1538  * 1.7.4  Caller's context
1539  *
1540  *   Interrupts are disabled.  The DTrace framework is in a state such that the
1541  *   specified probe cannot be disabled or destroyed for the duration of
1542  *   dtps_resume().  As interrupts are disabled, the provider is afforded
1543  *   little latitude; the provider is expected to do no more than a store to
1544  *   memory.
1545  *
1546  * 1.8  void dtps_getargdesc(void *arg, dtrace_id_t id, void *parg,
1547  *           dtrace_argdesc_t *desc)
1548  *
1549  * 1.8.1  Overview
1550  *
1551  *   Called to retrieve the argument description for an args[X] variable.
1552  *
1553  * 1.8.2  Arguments and notes
1554  *
1555  *   The first argument is the cookie as passed to dtrace_register(). The
1556  *   second argument is the identifier of the current probe. The third
1557  *   argument is the probe argument as passed to dtrace_probe_create(). The
1558  *   fourth argument is a pointer to the argument description.  This
1559  *   description is both an input and output parameter:  it contains the
1560  *   index of the desired argument in the dtargd_ndx field, and expects
1561  *   the other fields to be filled in upon return.  If there is no argument
1562  *   corresponding to the specified index, the dtargd_ndx field should be set
1563  *   to DTRACE_ARGNONE.
1564  *
1565  * 1.8.3  Return value
1566  *
1567  *   None.  The dtargd_ndx, dtargd_native, dtargd_xlate and dtargd_mapping
1568  *   members of the dtrace_argdesc_t structure are all output values.
1569  *
1570  * 1.8.4  Caller's context
1571  *
1572  *   dtps_getargdesc() is called from ioctl() context. mod_lock is held, and
1573  *   the DTrace framework is locked in such a way that providers may not
1574  *   register or unregister.  This means that the provider may not call any
1575  *   DTrace API that affects its registration with the framework, including
1576  *   dtrace_register(), dtrace_unregister(), dtrace_invalidate(), and
1577  *   dtrace_condense().
1578  *
1579  * 1.9  uint64_t dtps_getargval(void *arg, dtrace_id_t id, void *parg,
1580  *               int argno, int aframes)
1581  *
1582  * 1.9.1  Overview
1583  *
1584  *   Called to retrieve a value for an argX or args[X] variable.
1585  *
1586  * 1.9.2  Arguments and notes
1587  *
1588  *   The first argument is the cookie as passed to dtrace_register(). The
1589  *   second argument is the identifier of the current probe. The third
1590  *   argument is the probe argument as passed to dtrace_probe_create(). The
1591  *   fourth argument is the number of the argument (the X in the example in
1592  *   1.9.1). The fifth argument is the number of stack frames that were used
1593  *   to get from the actual place in the code that fired the probe to
1594  *   dtrace_probe() itself, the so-called artificial frames. This argument may
1595  *   be used to descend an appropriate number of frames to find the correct
1596  *   values. If this entry point is left NULL, the dtrace_getarg() built-in
1597  *   function is used.
1598  *
1599  * 1.9.3  Return value
1600  *
1601  *   The value of the argument.
1602  *
1603  * 1.9.4  Caller's context
1604  *
1605  *   This is called from within dtrace_probe() meaning that interrupts
1606  *   are disabled. No locks should be taken within this entry point.
1607  *
1608  * 1.10  int dtps_mode(void *arg, dtrace_id_t id, void *parg)
1609  *
1610  * 1.10.1  Overview
1611  *
1612  *   Called to determine the mode of a fired probe.
1613  *
1614  * 1.10.2  Arguments and notes
1615  *
1616  *   The first argument is the cookie as passed to dtrace_register(). The
1617  *   second argument is the identifier of the current probe.  The third
1618  *   argument is the probe argument as passed to dtrace_probe_create().  This
1619  *   entry point must not be left NULL for providers whose probes allow for
1620  *   mixed mode tracing, that is to say those unanchored probes that can fire
1621  *   during kernel- or user-mode execution.
1622  *
1623  * 1.10.3  Return value
1624  *
1625  *   A bitwise OR that encapsulates both the mode (either DTRACE_MODE_KERNEL
1626  *   or DTRACE_MODE_USER) and the policy when the privilege of the enabling
1627  *   is insufficient for that mode (either DTRACE_MODE_NOPRIV_DROP or
1628  *   DTRACE_MODE_NOPRIV_RESTRICT).  If the policy is DTRACE_MODE_NOPRIV_DROP,
1629  *   insufficient privilege will result in the probe firing being silently
1630  *   ignored for the enabling; if the policy is DTRACE_NODE_NOPRIV_RESTRICT,
1631  *   insufficient privilege will not prevent probe processing for the
1632  *   enabling, but restrictions will be in place that induce a UPRIV fault
1633  *   upon attempt to examine probe arguments or current process state.
1634  *
1635  * 1.10.4  Caller's context
1636  *
1637  *   This is called from within dtrace_probe() meaning that interrupts
1638  *   are disabled. No locks should be taken within this entry point.
1639  *
1640  * 1.11 void dtps_destroy(void *arg, dtrace_id_t id, void *parg)
1641  *
1642  * 1.11.1 Overview
1643  *
1644  *   Called to destroy the specified probe.
1645  *
1646  * 1.11.2 Arguments and notes
1647  *
1648  *   The first argument is the cookie as passed to dtrace_register().  The
1649  *   second argument is the identifier of the probe to be destroyed.  The third
1650  *   argument is the probe argument as passed to dtrace_probe_create().  The
1651  *   provider should free all state associated with the probe.  The framework
1652  *   guarantees that dtps_destroy() is only called for probes that have either
1653  *   been disabled via dtps_disable() or were never enabled via dtps_enable().
1654  *   Once dtps_disable() has been called for a probe, no further call will be
1655  *   made specifying the probe.
1656  *
1657  * 1.11.3 Return value
1658  *
1659  *   None.
1660  *
1661  * 1.11.4 Caller's context
1662  *
1663  *   The DTrace framework is locked in such a way that it may not be called
1664  *   back into at all.  mod_lock is held.  cpu_lock is not held, and may not be
1665  *   acquired.
1666  *
1667  *
1668  * 2 Provider-to-Framework API
1669  *
1670  * 2.1  Overview
1671  *
1672  * The Provider-to-Framework API provides the mechanism for the provider to
1673  * register itself with the DTrace framework, to create probes, to lookup
1674  * probes and (most importantly) to fire probes.  The Provider-to-Framework
1675  * consists of:
1676  *
1677  *   dtrace_register()       <-- Register a provider with the DTrace framework
1678  *   dtrace_unregister()     <-- Remove a provider's DTrace registration
1679  *   dtrace_invalidate()     <-- Invalidate the specified provider
1680  *   dtrace_condense()       <-- Remove a provider's unenabled probes
1681  *   dtrace_attached()       <-- Indicates whether or not DTrace has attached
1682  *   dtrace_probe_create()   <-- Create a DTrace probe
1683  *   dtrace_probe_lookup()   <-- Lookup a DTrace probe based on its name
1684  *   dtrace_probe_arg()      <-- Return the probe argument for a specific probe
1685  *   dtrace_probe()          <-- Fire the specified probe
1686  *
1687  * 2.2  int dtrace_register(const char *name, const dtrace_pattr_t *pap,
1688  *          uint32_t priv, cred_t *cr, const dtrace_pops_t *pops, void *arg,
1689  *          dtrace_provider_id_t *idp)
1690  *
1691  * 2.2.1  Overview
1692  *
1693  *   dtrace_register() registers the calling provider with the DTrace
1694  *   framework.  It should generally be called by DTrace providers in their
1695  *   attach(9E) entry point.
1696  *
1697  * 2.2.2  Arguments and Notes
1698  *
1699  *   The first argument is the name of the provider.  The second argument is a
1700  *   pointer to the stability attributes for the provider.  The third argument
1701  *   is the privilege flags for the provider, and must be some combination of:
1702  *
1703  *     DTRACE_PRIV_NONE     <= All users may enable probes from this provider
1704  *
1705  *     DTRACE_PRIV_PROC     <= Any user with privilege of PRIV_DTRACE_PROC may
1706  *                             enable probes from this provider
1707  *
1708  *     DTRACE_PRIV_USER     <= Any user with privilege of PRIV_DTRACE_USER may
1709  *                             enable probes from this provider
1710  *
1711  *     DTRACE_PRIV_KERNEL   <= Any user with privilege of PRIV_DTRACE_KERNEL
1712  *                             may enable probes from this provider
1713  *
1714  *     DTRACE_PRIV_OWNER    <= This flag places an additional constraint on
1715  *                             the privilege requirements above. These probes
1716  *                             require either (a) a user ID matching the user
1717  *                             ID of the cred passed in the fourth argument
1718  *                             or (b) the PRIV_PROC_OWNER privilege.
1719  *
1720  *     DTRACE_PRIV_ZONEOWNER<= This flag places an additional constraint on
1721  *                             the privilege requirements above. These probes
1722  *                             require either (a) a zone ID matching the zone
1723  *                             ID of the cred passed in the fourth argument
1724  *                             or (b) the PRIV_PROC_ZONE privilege.
1725  *
1726  *   Note that these flags designate the _visibility_ of the probes, not
1727  *   the conditions under which they may or may not fire.
1728  *
1729  *   The fourth argument is the credential that is associated with the
1730  *   provider.  This argument should be NULL if the privilege flags don't
1731  *   include DTRACE_PRIV_OWNER or DTRACE_PRIV_ZONEOWNER.  If non-NULL, the
1732  *   framework stashes the uid and zoneid represented by this credential
1733  *   for use at probe-time, in implicit predicates.  These limit visibility
1734  *   of the probes to users and/or zones which have sufficient privilege to
1735  *   access them.
1736  *
1737  *   The fifth argument is a DTrace provider operations vector, which provides
1738  *   the implementation for the Framework-to-Provider API.  (See Section 1,
1739  *   above.)  This must be non-NULL, and each member must be non-NULL.  The
1740  *   exceptions to this are (1) the dtps_provide() and dtps_provide_module()
1741  *   members (if the provider so desires, _one_ of these members may be left
1742  *   NULL -- denoting that the provider only implements the other) and (2)
1743  *   the dtps_suspend() and dtps_resume() members, which must either both be
1744  *   NULL or both be non-NULL.
1745  *
1746  *   The sixth argument is a cookie to be specified as the first argument for
1747  *   each function in the Framework-to-Provider API.  This argument may have
1748  *   any value.
1749  *
1750  *   The final argument is a pointer to dtrace_provider_id_t.  If
1751  *   dtrace_register() successfully completes, the provider identifier will be
1752  *   stored in the memory pointed to be this argument.  This argument must be
1753  *   non-NULL.
1754  *
1755  * 2.2.3  Return value
1756  *
1757  *   On success, dtrace_register() returns 0 and stores the new provider's
1758  *   identifier into the memory pointed to by the idp argument.  On failure,
1759  *   dtrace_register() returns an errno:
1760  *
1761  *     EINVAL   The arguments passed to dtrace_register() were somehow invalid.
1762  *              This may because a parameter that must be non-NULL was NULL,
1763  *              because the name was invalid (either empty or an illegal
1764  *              provider name) or because the attributes were invalid.
1765  *
1766  *   No other failure code is returned.
1767  *
1768  * 2.2.4  Caller's context
1769  *
1770  *   dtrace_register() may induce calls to dtrace_provide(); the provider must
1771  *   hold no locks across dtrace_register() that may also be acquired by
1772  *   dtrace_provide().  cpu_lock and mod_lock must not be held.
1773  *
1774  * 2.3  int dtrace_unregister(dtrace_provider_t id)
1775  *
1776  * 2.3.1  Overview
1777  *
1778  *   Unregisters the specified provider from the DTrace framework.  It should
1779  *   generally be called by DTrace providers in their detach(9E) entry point.
1780  *
1781  * 2.3.2  Arguments and Notes
1782  *
1783  *   The only argument is the provider identifier, as returned from a
1784  *   successful call to dtrace_register().  As a result of calling
1785  *   dtrace_unregister(), the DTrace framework will call back into the provider
1786  *   via the dtps_destroy() entry point.  Once dtrace_unregister() successfully
1787  *   completes, however, the DTrace framework will no longer make calls through
1788  *   the Framework-to-Provider API.
1789  *
1790  * 2.3.3  Return value
1791  *
1792  *   On success, dtrace_unregister returns 0.  On failure, dtrace_unregister()
1793  *   returns an errno:
1794  *
1795  *     EBUSY    There are currently processes that have the DTrace pseudodevice
1796  *              open, or there exists an anonymous enabling that hasn't yet
1797  *              been claimed.
1798  *
1799  *   No other failure code is returned.
1800  *
1801  * 2.3.4  Caller's context
1802  *
1803  *   Because a call to dtrace_unregister() may induce calls through the
1804  *   Framework-to-Provider API, the caller may not hold any lock across
1805  *   dtrace_register() that is also acquired in any of the Framework-to-
1806  *   Provider API functions.  Additionally, mod_lock may not be held.
1807  *
1808  * 2.4  void dtrace_invalidate(dtrace_provider_id_t id)
1809  *
1810  * 2.4.1  Overview
1811  *
1812  *   Invalidates the specified provider.  All subsequent probe lookups for the
1813  *   specified provider will fail, but its probes will not be removed.
1814  *
1815  * 2.4.2  Arguments and note
1816  *
1817  *   The only argument is the provider identifier, as returned from a
1818  *   successful call to dtrace_register().  In general, a provider's probes
1819  *   always remain valid; dtrace_invalidate() is a mechanism for invalidating
1820  *   an entire provider, regardless of whether or not probes are enabled or
1821  *   not.  Note that dtrace_invalidate() will _not_ prevent already enabled
1822  *   probes from firing -- it will merely prevent any new enablings of the
1823  *   provider's probes.
1824  *
1825  * 2.5 int dtrace_condense(dtrace_provider_id_t id)
1826  *
1827  * 2.5.1  Overview
1828  *
1829  *   Removes all the unenabled probes for the given provider. This function is
1830  *   not unlike dtrace_unregister(), except that it doesn't remove the
1831  *   provider just as many of its associated probes as it can.
1832  *
1833  * 2.5.2  Arguments and Notes
1834  *
1835  *   As with dtrace_unregister(), the sole argument is the provider identifier
1836  *   as returned from a successful call to dtrace_register().  As a result of
1837  *   calling dtrace_condense(), the DTrace framework will call back into the
1838  *   given provider's dtps_destroy() entry point for each of the provider's
1839  *   unenabled probes.
1840  *
1841  * 2.5.3  Return value
1842  *
1843  *   Currently, dtrace_condense() always returns 0.  However, consumers of this
1844  *   function should check the return value as appropriate; its behavior may
1845  *   change in the future.
1846  *
1847  * 2.5.4  Caller's context
1848  *
1849  *   As with dtrace_unregister(), the caller may not hold any lock across
1850  *   dtrace_condense() that is also acquired in the provider's entry points.
1851  *   Also, mod_lock may not be held.
1852  *
1853  * 2.6 int dtrace_attached()
1854  *
1855  * 2.6.1  Overview
1856  *
1857  *   Indicates whether or not DTrace has attached.
1858  *
1859  * 2.6.2  Arguments and Notes
1860  *
1861  *   For most providers, DTrace makes initial contact beyond registration.
1862  *   That is, once a provider has registered with DTrace, it waits to hear
1863  *   from DTrace to create probes.  However, some providers may wish to
1864  *   proactively create probes without first being told by DTrace to do so.
1865  *   If providers wish to do this, they must first call dtrace_attached() to
1866  *   determine if DTrace itself has attached.  If dtrace_attached() returns 0,
1867  *   the provider must not make any other Provider-to-Framework API call.
1868  *
1869  * 2.6.3  Return value
1870  *
1871  *   dtrace_attached() returns 1 if DTrace has attached, 0 otherwise.
1872  *
1873  * 2.7  int dtrace_probe_create(dtrace_provider_t id, const char *mod,
1874  *          const char *func, const char *name, int aframes, void *arg)
1875  *
1876  * 2.7.1  Overview
1877  *
1878  *   Creates a probe with specified module name, function name, and name.
1879  *
1880  * 2.7.2  Arguments and Notes
1881  *
1882  *   The first argument is the provider identifier, as returned from a
1883  *   successful call to dtrace_register().  The second, third, and fourth
1884  *   arguments are the module name, function name, and probe name,
1885  *   respectively.  Of these, module name and function name may both be NULL
1886  *   (in which case the probe is considered to be unanchored), or they may both
1887  *   be non-NULL.  The name must be non-NULL, and must point to a non-empty
1888  *   string.
1889  *
1890  *   The fifth argument is the number of artificial stack frames that will be
1891  *   found on the stack when dtrace_probe() is called for the new probe.  These
1892  *   artificial frames will be automatically be pruned should the stack() or
1893  *   stackdepth() functions be called as part of one of the probe's ECBs.  If
1894  *   the parameter doesn't add an artificial frame, this parameter should be
1895  *   zero.
1896  *
1897  *   The final argument is a probe argument that will be passed back to the
1898  *   provider when a probe-specific operation is called.  (e.g., via
1899  *   dtps_enable(), dtps_disable(), etc.)
1900  *
1901  *   Note that it is up to the provider to be sure that the probe that it
1902  *   creates does not already exist -- if the provider is unsure of the probe's
1903  *   existence, it should assure its absence with dtrace_probe_lookup() before
1904  *   calling dtrace_probe_create().
1905  *
1906  * 2.7.3  Return value
1907  *
1908  *   dtrace_probe_create() always succeeds, and always returns the identifier
1909  *   of the newly-created probe.
1910  *
1911  * 2.7.4  Caller's context
1912  *
1913  *   While dtrace_probe_create() is generally expected to be called from
1914  *   dtps_provide() and/or dtps_provide_module(), it may be called from other
1915  *   non-DTrace contexts.  Neither cpu_lock nor mod_lock may be held.
1916  *
1917  * 2.8  dtrace_id_t dtrace_probe_lookup(dtrace_provider_t id, const char *mod,
1918  *          const char *func, const char *name)
1919  *
1920  * 2.8.1  Overview
1921  *
1922  *   Looks up a probe based on provdider and one or more of module name,
1923  *   function name and probe name.
1924  *
1925  * 2.8.2  Arguments and Notes
1926  *
1927  *   The first argument is the provider identifier, as returned from a
1928  *   successful call to dtrace_register().  The second, third, and fourth
1929  *   arguments are the module name, function name, and probe name,
1930  *   respectively.  Any of these may be NULL; dtrace_probe_lookup() will return
1931  *   the identifier of the first probe that is provided by the specified
1932  *   provider and matches all of the non-NULL matching criteria.
1933  *   dtrace_probe_lookup() is generally used by a provider to be check the
1934  *   existence of a probe before creating it with dtrace_probe_create().
1935  *
1936  * 2.8.3  Return value
1937  *
1938  *   If the probe exists, returns its identifier.  If the probe does not exist,
1939  *   return DTRACE_IDNONE.
1940  *
1941  * 2.8.4  Caller's context
1942  *
1943  *   While dtrace_probe_lookup() is generally expected to be called from
1944  *   dtps_provide() and/or dtps_provide_module(), it may also be called from
1945  *   other non-DTrace contexts.  Neither cpu_lock nor mod_lock may be held.
1946  *
1947  * 2.9  void *dtrace_probe_arg(dtrace_provider_t id, dtrace_id_t probe)
1948  *
1949  * 2.9.1  Overview
1950  *
1951  *   Returns the probe argument associated with the specified probe.
1952  *
1953  * 2.9.2  Arguments and Notes
1954  *
1955  *   The first argument is the provider identifier, as returned from a
1956  *   successful call to dtrace_register().  The second argument is a probe
1957  *   identifier, as returned from dtrace_probe_lookup() or
1958  *   dtrace_probe_create().  This is useful if a probe has multiple
1959  *   provider-specific components to it:  the provider can create the probe
1960  *   once with provider-specific state, and then add to the state by looking
1961  *   up the probe based on probe identifier.
1962  *
1963  * 2.9.3  Return value
1964  *
1965  *   Returns the argument associated with the specified probe.  If the
1966  *   specified probe does not exist, or if the specified probe is not provided
1967  *   by the specified provider, NULL is returned.
1968  *
1969  * 2.9.4  Caller's context
1970  *
1971  *   While dtrace_probe_arg() is generally expected to be called from
1972  *   dtps_provide() and/or dtps_provide_module(), it may also be called from
1973  *   other non-DTrace contexts.  Neither cpu_lock nor mod_lock may be held.
1974  *
1975  * 2.10  void dtrace_probe(dtrace_id_t probe, uintptr_t arg0, uintptr_t arg1,
1976  *              uintptr_t arg2, uintptr_t arg3, uintptr_t arg4)
1977  *
1978  * 2.10.1  Overview
1979  *
1980  *   The epicenter of DTrace:  fires the specified probes with the specified
1981  *   arguments.
1982  *
1983  * 2.10.2  Arguments and Notes
1984  *
1985  *   The first argument is a probe identifier as returned by
1986  *   dtrace_probe_create() or dtrace_probe_lookup().  The second through sixth
1987  *   arguments are the values to which the D variables "arg0" through "arg4"
1988  *   will be mapped.
1989  *
1990  *   dtrace_probe() should be called whenever the specified probe has fired --
1991  *   however the provider defines it.
1992  *
1993  * 2.10.3  Return value
1994  *
1995  *   None.
1996  *
1997  * 2.10.4  Caller's context
1998  *
1999  *   dtrace_probe() may be called in virtually any context:  kernel, user,
2000  *   interrupt, high-level interrupt, with arbitrary adaptive locks held, with
2001  *   dispatcher locks held, with interrupts disabled, etc.  The only latitude
2002  *   that must be afforded to DTrace is the ability to make calls within
2003  *   itself (and to its in-kernel subroutines) and the ability to access
2004  *   arbitrary (but mapped) memory.  On some platforms, this constrains
2005  *   context.  For example, on UltraSPARC, dtrace_probe() cannot be called
2006  *   from any context in which TL is greater than zero.  dtrace_probe() may
2007  *   also not be called from any routine which may be called by dtrace_probe()
2008  *   -- which includes functions in the DTrace framework and some in-kernel
2009  *   DTrace subroutines.  All such functions "dtrace_"; providers that
2010  *   instrument the kernel arbitrarily should be sure to not instrument these
2011  *   routines.
2012  */
2013 typedef struct dtrace_pops {
2014         void (*dtps_provide)(void *arg, const dtrace_probedesc_t *spec);
2015         void (*dtps_provide_module)(void *arg, struct modctl *mp);
2016         int (*dtps_enable)(void *arg, dtrace_id_t id, void *parg);
2017         void (*dtps_disable)(void *arg, dtrace_id_t id, void *parg);
2018         void (*dtps_suspend)(void *arg, dtrace_id_t id, void *parg);
2019         void (*dtps_resume)(void *arg, dtrace_id_t id, void *parg);
2020         void (*dtps_getargdesc)(void *arg, dtrace_id_t id, void *parg,
2021             dtrace_argdesc_t *desc);
2022         uint64_t (*dtps_getargval)(void *arg, dtrace_id_t id, void *parg,
2023             int argno, int aframes);
2024         int (*dtps_mode)(void *arg, dtrace_id_t id, void *parg);
2025         void (*dtps_destroy)(void *arg, dtrace_id_t id, void *parg);
2026 } dtrace_pops_t;
2027 
2028 #define DTRACE_MODE_KERNEL                      0x01
2029 #define DTRACE_MODE_USER                        0x02
2030 #define DTRACE_MODE_NOPRIV_DROP                 0x10
2031 #define DTRACE_MODE_NOPRIV_RESTRICT             0x20
2032 
2033 typedef uintptr_t       dtrace_provider_id_t;
2034 
2035 extern int dtrace_register(const char *, const dtrace_pattr_t *, uint32_t,
2036     cred_t *, const dtrace_pops_t *, void *, dtrace_provider_id_t *);
2037 extern int dtrace_unregister(dtrace_provider_id_t);
2038 extern int dtrace_condense(dtrace_provider_id_t);
2039 extern void dtrace_invalidate(dtrace_provider_id_t);
2040 extern dtrace_id_t dtrace_probe_lookup(dtrace_provider_id_t, const char *,
2041     const char *, const char *);
2042 extern dtrace_id_t dtrace_probe_create(dtrace_provider_id_t, const char *,
2043     const char *, const char *, int, void *);
2044 extern void *dtrace_probe_arg(dtrace_provider_id_t, dtrace_id_t);
2045 extern void dtrace_probe(dtrace_id_t, uintptr_t arg0, uintptr_t arg1,
2046     uintptr_t arg2, uintptr_t arg3, uintptr_t arg4);
2047 
2048 /*
2049  * DTrace Meta Provider API
2050  *
2051  * The following functions are implemented by the DTrace framework and are
2052  * used to implement meta providers. Meta providers plug into the DTrace
2053  * framework and are used to instantiate new providers on the fly. At
2054  * present, there is only one type of meta provider and only one meta
2055  * provider may be registered with the DTrace framework at a time. The
2056  * sole meta provider type provides user-land static tracing facilities
2057  * by taking meta probe descriptions and adding a corresponding provider
2058  * into the DTrace framework.
2059  *
2060  * 1 Framework-to-Provider
2061  *
2062  * 1.1 Overview
2063  *
2064  * The Framework-to-Provider API is represented by the dtrace_mops structure
2065  * that the meta provider passes to the framework when registering itself as
2066  * a meta provider. This structure consists of the following members:
2067  *
2068  *   dtms_create_probe()        <-- Add a new probe to a created provider
2069  *   dtms_provide_pid()         <-- Create a new provider for a given process
2070  *   dtms_remove_pid()          <-- Remove a previously created provider
2071  *
2072  * 1.2  void dtms_create_probe(void *arg, void *parg,
2073  *           dtrace_helper_probedesc_t *probedesc);
2074  *
2075  * 1.2.1  Overview
2076  *
2077  *   Called by the DTrace framework to create a new probe in a provider
2078  *   created by this meta provider.
2079  *
2080  * 1.2.2  Arguments and notes
2081  *
2082  *   The first argument is the cookie as passed to dtrace_meta_register().
2083  *   The second argument is the provider cookie for the associated provider;
2084  *   this is obtained from the return value of dtms_provide_pid(). The third
2085  *   argument is the helper probe description.
2086  *
2087  * 1.2.3  Return value
2088  *
2089  *   None
2090  *
2091  * 1.2.4  Caller's context
2092  *
2093  *   dtms_create_probe() is called from either ioctl() or module load context.
2094  *   The DTrace framework is locked in such a way that meta providers may not
2095  *   register or unregister. This means that the meta provider cannot call
2096  *   dtrace_meta_register() or dtrace_meta_unregister(). However, the context is
2097  *   such that the provider may (and is expected to) call provider-related
2098  *   DTrace provider APIs including dtrace_probe_create().
2099  *
2100  * 1.3  void *dtms_provide_pid(void *arg, dtrace_meta_provider_t *mprov,
2101  *            pid_t pid)
2102  *
2103  * 1.3.1  Overview
2104  *
2105  *   Called by the DTrace framework to instantiate a new provider given the
2106  *   description of the provider and probes in the mprov argument. The
2107  *   meta provider should call dtrace_register() to insert the new provider
2108  *   into the DTrace framework.
2109  *
2110  * 1.3.2  Arguments and notes
2111  *
2112  *   The first argument is the cookie as passed to dtrace_meta_register().
2113  *   The second argument is a pointer to a structure describing the new
2114  *   helper provider. The third argument is the process identifier for
2115  *   process associated with this new provider. Note that the name of the
2116  *   provider as passed to dtrace_register() should be the contatenation of
2117  *   the dtmpb_provname member of the mprov argument and the processs
2118  *   identifier as a string.
2119  *
2120  * 1.3.3  Return value
2121  *
2122  *   The cookie for the provider that the meta provider creates. This is
2123  *   the same value that it passed to dtrace_register().
2124  *
2125  * 1.3.4  Caller's context
2126  *
2127  *   dtms_provide_pid() is called from either ioctl() or module load context.
2128  *   The DTrace framework is locked in such a way that meta providers may not
2129  *   register or unregister. This means that the meta provider cannot call
2130  *   dtrace_meta_register() or dtrace_meta_unregister(). However, the context
2131  *   is such that the provider may -- and is expected to --  call
2132  *   provider-related DTrace provider APIs including dtrace_register().
2133  *
2134  * 1.4  void dtms_remove_pid(void *arg, dtrace_meta_provider_t *mprov,
2135  *           pid_t pid)
2136  *
2137  * 1.4.1  Overview
2138  *
2139  *   Called by the DTrace framework to remove a provider that had previously
2140  *   been instantiated via the dtms_provide_pid() entry point. The meta
2141  *   provider need not remove the provider immediately, but this entry
2142  *   point indicates that the provider should be removed as soon as possible
2143  *   using the dtrace_unregister() API.
2144  *
2145  * 1.4.2  Arguments and notes
2146  *
2147  *   The first argument is the cookie as passed to dtrace_meta_register().
2148  *   The second argument is a pointer to a structure describing the helper
2149  *   provider. The third argument is the process identifier for process
2150  *   associated with this new provider.
2151  *
2152  * 1.4.3  Return value
2153  *
2154  *   None
2155  *
2156  * 1.4.4  Caller's context
2157  *
2158  *   dtms_remove_pid() is called from either ioctl() or exit() context.
2159  *   The DTrace framework is locked in such a way that meta providers may not
2160  *   register or unregister. This means that the meta provider cannot call
2161  *   dtrace_meta_register() or dtrace_meta_unregister(). However, the context
2162  *   is such that the provider may -- and is expected to -- call
2163  *   provider-related DTrace provider APIs including dtrace_unregister().
2164  */
2165 typedef struct dtrace_helper_probedesc {
2166         char *dthpb_mod;                        /* probe module */
2167         char *dthpb_func;                       /* probe function */
2168         char *dthpb_name;                       /* probe name */
2169         uint64_t dthpb_base;                    /* base address */
2170         uint32_t *dthpb_offs;                   /* offsets array */
2171         uint32_t *dthpb_enoffs;                 /* is-enabled offsets array */
2172         uint32_t dthpb_noffs;                   /* offsets count */
2173         uint32_t dthpb_nenoffs;                 /* is-enabled offsets count */
2174         uint8_t *dthpb_args;                    /* argument mapping array */
2175         uint8_t dthpb_xargc;                    /* translated argument count */
2176         uint8_t dthpb_nargc;                    /* native argument count */
2177         char *dthpb_xtypes;                     /* translated types strings */
2178         char *dthpb_ntypes;                     /* native types strings */
2179 } dtrace_helper_probedesc_t;
2180 
2181 typedef struct dtrace_helper_provdesc {
2182         char *dthpv_provname;                   /* provider name */
2183         dtrace_pattr_t dthpv_pattr;             /* stability attributes */
2184 } dtrace_helper_provdesc_t;
2185 
2186 typedef struct dtrace_mops {
2187         void (*dtms_create_probe)(void *, void *, dtrace_helper_probedesc_t *);
2188         void *(*dtms_provide_pid)(void *, dtrace_helper_provdesc_t *, pid_t);
2189         void (*dtms_remove_pid)(void *, dtrace_helper_provdesc_t *, pid_t);
2190 } dtrace_mops_t;
2191 
2192 typedef uintptr_t       dtrace_meta_provider_id_t;
2193 
2194 extern int dtrace_meta_register(const char *, const dtrace_mops_t *, void *,
2195     dtrace_meta_provider_id_t *);
2196 extern int dtrace_meta_unregister(dtrace_meta_provider_id_t);
2197 
2198 /*
2199  * DTrace Kernel Hooks
2200  *
2201  * The following functions are implemented by the base kernel and form a set of
2202  * hooks used by the DTrace framework.  DTrace hooks are implemented in either
2203  * uts/common/os/dtrace_subr.c, an ISA-specific assembly file, or in a
2204  * uts/<platform>/os/dtrace_subr.c corresponding to each hardware platform.
2205  */
2206 
2207 typedef enum dtrace_vtime_state {
2208         DTRACE_VTIME_INACTIVE = 0,      /* No DTrace, no TNF */
2209         DTRACE_VTIME_ACTIVE,            /* DTrace virtual time, no TNF */
2210         DTRACE_VTIME_INACTIVE_TNF,      /* No DTrace, TNF active */
2211         DTRACE_VTIME_ACTIVE_TNF         /* DTrace virtual time _and_ TNF */
2212 } dtrace_vtime_state_t;
2213 
2214 extern dtrace_vtime_state_t dtrace_vtime_active;
2215 extern void dtrace_vtime_switch(kthread_t *next);
2216 extern void dtrace_vtime_enable_tnf(void);
2217 extern void dtrace_vtime_disable_tnf(void);
2218 extern void dtrace_vtime_enable(void);
2219 extern void dtrace_vtime_disable(void);
2220 
2221 struct regs;
2222 
2223 extern int (*dtrace_pid_probe_ptr)(struct regs *);
2224 extern int (*dtrace_return_probe_ptr)(struct regs *);
2225 extern void (*dtrace_fasttrap_fork_ptr)(proc_t *, proc_t *);
2226 extern void (*dtrace_fasttrap_exec_ptr)(proc_t *);
2227 extern void (*dtrace_fasttrap_exit_ptr)(proc_t *);
2228 extern void dtrace_fasttrap_fork(proc_t *, proc_t *);
2229 
2230 typedef uintptr_t dtrace_icookie_t;
2231 typedef void (*dtrace_xcall_t)(void *);
2232 
2233 extern dtrace_icookie_t dtrace_interrupt_disable(void);
2234 extern void dtrace_interrupt_enable(dtrace_icookie_t);
2235 
2236 extern void dtrace_membar_producer(void);
2237 extern void dtrace_membar_consumer(void);
2238 
2239 extern void (*dtrace_cpu_init)(processorid_t);
2240 extern void (*dtrace_modload)(struct modctl *);
2241 extern void (*dtrace_modunload)(struct modctl *);
2242 extern void (*dtrace_helpers_cleanup)();
2243 extern void (*dtrace_helpers_fork)(proc_t *parent, proc_t *child);
2244 extern void (*dtrace_cpustart_init)();
2245 extern void (*dtrace_cpustart_fini)();
2246 
2247 extern void (*dtrace_debugger_init)();
2248 extern void (*dtrace_debugger_fini)();
2249 extern dtrace_cacheid_t dtrace_predcache_id;
2250 
2251 extern hrtime_t dtrace_gethrtime(void);
2252 extern void dtrace_sync(void);
2253 extern void dtrace_toxic_ranges(void (*)(uintptr_t, uintptr_t));
2254 extern void dtrace_xcall(processorid_t, dtrace_xcall_t, void *);
2255 extern void dtrace_vpanic(const char *, __va_list);
2256 extern void dtrace_panic(const char *, ...);
2257 
2258 extern int dtrace_safe_defer_signal(void);
2259 extern void dtrace_safe_synchronous_signal(void);
2260 
2261 extern int dtrace_mach_aframes(void);
2262 
2263 #if defined(__i386) || defined(__amd64)
2264 extern int dtrace_instr_size(uchar_t *instr);
2265 extern int dtrace_instr_size_isa(uchar_t *, model_t, int *);
2266 extern void dtrace_invop_add(int (*)(uintptr_t, uintptr_t *, uintptr_t));
2267 extern void dtrace_invop_remove(int (*)(uintptr_t, uintptr_t *, uintptr_t));
2268 extern void dtrace_invop_callsite(void);
2269 #endif
2270 
2271 #ifdef __sparc
2272 extern int dtrace_blksuword32(uintptr_t, uint32_t *, int);
2273 extern void dtrace_getfsr(uint64_t *);
2274 #endif
2275 
2276 #define DTRACE_CPUFLAG_ISSET(flag) \
2277         (cpu_core[CPU->cpu_id].cpuc_dtrace_flags & (flag))
2278 
2279 #define DTRACE_CPUFLAG_SET(flag) \
2280         (cpu_core[CPU->cpu_id].cpuc_dtrace_flags |= (flag))
2281 
2282 #define DTRACE_CPUFLAG_CLEAR(flag) \
2283         (cpu_core[CPU->cpu_id].cpuc_dtrace_flags &= ~(flag))
2284 
2285 #endif /* _KERNEL */
2286 
2287 #endif  /* _ASM */
2288 
2289 #if defined(__i386) || defined(__amd64)
2290 
2291 #define DTRACE_INVOP_PUSHL_EBP          1
2292 #define DTRACE_INVOP_POPL_EBP           2
2293 #define DTRACE_INVOP_LEAVE              3
2294 #define DTRACE_INVOP_NOP                4
2295 #define DTRACE_INVOP_RET                5
2296 
2297 #endif
2298 
2299 #ifdef  __cplusplus
2300 }
2301 #endif
2302 
2303 #endif  /* _SYS_DTRACE_H */