1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21 /*
22 * Copyright (c) 1989, 2010, Oracle and/or its affiliates. All rights reserved.
23 * Copyright 2013 Nexenta Systems, Inc. All rights reserved.
24 */
25 /* Copyright (c) 1983, 1984, 1985, 1986, 1987, 1988, 1989 AT&T */
26 /* All Rights Reserved */
27 /*
28 * Portions of this source code were derived from Berkeley
29 * 4.3 BSD under license from the Regents of the University of
30 * California.
31 */
32
33 /*
34 * svc.h, Server-side remote procedure call interface.
35 */
36
37 #ifndef _RPC_SVC_H
38 #define _RPC_SVC_H
39
40 #include <rpc/rpc_com.h>
41 #include <rpc/rpc_msg.h>
42 #include <sys/tihdr.h>
43 #include <sys/poll.h>
44 #include <sys/tsol/label.h>
45
46 #ifdef _KERNEL
47 #include <rpc/svc_auth.h>
48 #include <sys/callb.h>
49 #endif /* _KERNEL */
50
51 /*
52 * This interface must manage two items concerning remote procedure calling:
53 *
54 * 1) An arbitrary number of transport connections upon which rpc requests
55 * are received. They are created and registered by routines in svc_generic.c,
56 * svc_vc.c and svc_dg.c; they in turn call xprt_register and
57 * xprt_unregister.
58 *
59 * 2) An arbitrary number of locally registered services. Services are
60 * described by the following four data: program number, version number,
61 * "service dispatch" function, a transport handle, and a boolean that
62 * indicates whether or not the exported program should be registered with a
63 * local binder service; if true the program's number and version and the
64 * address from the transport handle are registered with the binder.
65 * These data are registered with rpcbind via svc_reg().
66 *
67 * A service's dispatch function is called whenever an rpc request comes in
68 * on a transport. The request's program and version numbers must match
69 * those of the registered service. The dispatch function is passed two
70 * parameters, struct svc_req * and SVCXPRT *, defined below.
71 */
72
73 #ifdef __cplusplus
74 extern "C" {
75 #endif
76
77 /*
78 * Server-side transport handles.
79 * The actual type definitions are below.
80 */
81 #ifdef _KERNEL
82 typedef struct __svcmasterxprt SVCMASTERXPRT; /* Master transport handle */
83 typedef struct __svcxprt SVCXPRT; /* Per-thread clone handle */
84 typedef struct __svcpool SVCPOOL; /* Kernel thread pool */
85 #else /* _KERNEL */
86 typedef struct __svcxprt SVCXPRT; /* Server transport handle */
87 #endif /* _KERNEL */
88
89 /*
90 * Prototype of error handler callback
91 */
92 #ifndef _KERNEL
93 typedef void (*svc_errorhandler_t)(const SVCXPRT* svc, const bool_t isAConn);
94 #endif
95
96 /*
97 * Service request.
98 *
99 * PSARC 2003/523 Contract Private Interface
100 * svc_req
101 * Changes must be reviewed by Solaris File Sharing
102 * Changes must be communicated to contract-2003-523@sun.com
103 */
104 struct svc_req {
105 rpcprog_t rq_prog; /* service program number */
106 rpcvers_t rq_vers; /* service protocol version */
107 rpcproc_t rq_proc; /* the desired procedure */
108 struct opaque_auth rq_cred; /* raw creds from the wire */
109 caddr_t rq_clntcred; /* read only cooked cred */
110 SVCXPRT *rq_xprt; /* associated transport */
111 bslabel_t *rq_label; /* TSOL label of the request */
112 };
113
114 #ifdef _KERNEL
115 struct dupreq {
116 uint32_t dr_xid;
117 rpcproc_t dr_proc;
118 rpcvers_t dr_vers;
119 rpcprog_t dr_prog;
120 struct netbuf dr_addr;
121 struct netbuf dr_resp;
122 void (*dr_resfree)();
123 int dr_status;
124 struct dupreq *dr_next;
125 struct dupreq *dr_chain;
126 };
127
128 /*
129 * States of requests for duplicate request caching.
130 */
131 #define DUP_NEW 0x00 /* new entry */
132 #define DUP_INPROGRESS 0x01 /* request already going */
133 #define DUP_DONE 0x02 /* request done */
134 #define DUP_DROP 0x03 /* request dropped */
135 #define DUP_ERROR 0x04 /* error in dup req cache */
136
137 /*
138 * Prototype for a service dispatch routine.
139 */
140 typedef void (SVC_DISPATCH)(struct svc_req *, SVCXPRT *);
141
142 /*
143 * The service provider callout.
144 * Each entry identifies a dispatch routine to be called
145 * for a given RPC program number and a version fitting
146 * into the registered range.
147 */
148 typedef struct {
149 rpcprog_t sc_prog; /* RPC Program number */
150 rpcvers_t sc_versmin; /* Min version number */
151 rpcvers_t sc_versmax; /* Max version number */
152 SVC_DISPATCH *sc_dispatch; /* Dispatch routine */
153 } SVC_CALLOUT;
154
155 /*
156 * Table of service provider `callouts' for an RPC
157 * transport handle. If sct_free is TRUE then transport
158 * destructor is supposed to deallocate this table.
159 */
160 typedef struct {
161 size_t sct_size; /* Number of entries */
162 bool_t sct_free; /* Deallocate if true */
163 SVC_CALLOUT *sct_sc; /* Callout entries */
164 } SVC_CALLOUT_TABLE;
165
166 struct svc_ops {
167 bool_t (*xp_recv)(SVCXPRT *, mblk_t *, struct rpc_msg *);
168 /* receive incoming requests */
169 bool_t (*xp_getargs)(SVCXPRT *, xdrproc_t, caddr_t);
170 /* get arguments */
171 bool_t (*xp_reply)(SVCXPRT *, struct rpc_msg *);
172 /* send reply */
173 bool_t (*xp_freeargs)(SVCXPRT *, xdrproc_t, caddr_t);
174 /* free mem allocated for args */
175 void (*xp_destroy)(SVCMASTERXPRT *);
176 /* destroy this struct */
177 int (*xp_dup)(struct svc_req *, caddr_t, int,
178 struct dupreq **, bool_t *);
179 /* check for dup */
180 void (*xp_dupdone)(struct dupreq *, caddr_t, void (*)(), int, int);
181 /* mark dup entry as completed */
182 int32_t *(*xp_getres)(SVCXPRT *, int);
183 /* get pointer to response buffer */
184 void (*xp_freeres)(SVCXPRT *);
185 /* destroy pre-serialized response */
186 void (*xp_clone_destroy)(SVCXPRT *);
187 /* destroy a clone xprt */
188 void (*xp_start)(SVCMASTERXPRT *);
189 /* `ready-to-receive' */
190 void (*xp_clone_xprt)(SVCXPRT *, SVCXPRT *);
191 /* transport specific clone function */
192 void (*xp_tattrs) (SVCXPRT *, int, void **);
193 };
194
195 #define SVC_TATTR_ADDRMASK 1
196
197 #else /* _KERNEL */
198 /*
199 * Service control requests
200 */
201 #define SVCGET_VERSQUIET 1
202 #define SVCSET_VERSQUIET 2
203 #define SVCGET_XID 4
204 #define SVCSET_KEEPALIVE 5
205 #define SVCSET_CONNMAXREC 6
206 #define SVCGET_CONNMAXREC 7
207 #define SVCGET_RECVERRHANDLER 8
208 #define SVCSET_RECVERRHANDLER 9
209
210 enum xprt_stat {
211 XPRT_DIED,
212 XPRT_MOREREQS,
213 XPRT_IDLE
214 };
215
216 struct xp_ops {
217 #ifdef __STDC__
218 bool_t (*xp_recv)(SVCXPRT *, struct rpc_msg *);
219 /* receive incoming requests */
220 enum xprt_stat (*xp_stat)(SVCXPRT *);
221 /* get transport status */
222 bool_t (*xp_getargs)(SVCXPRT *, xdrproc_t, caddr_t);
223 /* get arguments */
224 bool_t (*xp_reply)(SVCXPRT *, struct rpc_msg *);
225 /* send reply */
226 bool_t (*xp_freeargs)(SVCXPRT *, xdrproc_t, caddr_t);
227 /* free mem allocated for args */
228 void (*xp_destroy)(SVCXPRT *);
229 /* destroy this struct */
230 bool_t (*xp_control)(SVCXPRT *, const uint_t, void *);
231 /* catch-all control function */
232 #else /* __STDC__ */
233 bool_t (*xp_recv)(); /* receive incoming requests */
234 enum xprt_stat (*xp_stat)(); /* get transport status */
235 bool_t (*xp_getargs)(); /* get arguments */
236 bool_t (*xp_reply)(); /* send reply */
237 bool_t (*xp_freeargs)(); /* free mem allocated for args */
238 void (*xp_destroy)(); /* destroy this struct */
239 bool_t (*xp_control)(); /* catch-all control function */
240 #endif /* __STDC__ */
241 };
242 #endif /* _KERNEL */
243
244 #ifdef _KERNEL
245 /*
246 * SVCPOOL
247 * Kernel RPC server-side thread pool structure.
248 */
249 typedef struct __svcxprt_qnode __SVCXPRT_QNODE; /* Defined in svc.c */
250
251 struct __svcpool {
252 /*
253 * Thread pool variables.
254 *
255 * The pool's thread lock p_thread_lock protects:
256 * - p_threads, p_detached_threads, p_reserved_threads and p_closing
257 * The pool's request lock protects:
258 * - p_asleep, p_drowsy, p_reqs, p_size, p_walkers, p_req_cv.
259 * The following fields are `initialized constants':
260 * - p_id, p_stksize, p_timeout.
261 * Access to p_next and p_prev is protected by the pool
262 * list lock.
263 */
264 SVCPOOL *p_next; /* Next pool in the list */
265 SVCPOOL *p_prev; /* Prev pool in the list */
266 int p_id; /* Pool id */
267 int p_threads; /* Non-detached threads */
268 int p_detached_threads; /* Detached threads */
269 int p_maxthreads; /* Max threads in the pool */
270 int p_redline; /* `Redline' for the pool */
271 int p_reserved_threads; /* Reserved threads */
272 kmutex_t p_thread_lock; /* Thread lock */
273 int p_asleep; /* Asleep threads */
274 int p_drowsy; /* Drowsy flag */
275 kcondvar_t p_req_cv; /* svc_poll() sleep var. */
276 clock_t p_timeout; /* svc_poll() timeout */
277 kmutex_t p_req_lock; /* Request lock */
278 int p_reqs; /* Pending requests */
279 int p_walkers; /* Walking threads */
280 int p_max_same_xprt; /* Max reqs from the xprt */
281 int p_stksize; /* Stack size for svc_run */
282 bool_t p_closing : 1; /* Pool is closing */
283
284 /*
285 * Thread creator variables.
286 * The `creator signaled' flag is turned on when a signal is send
287 * to the creator thread (to create a new service thread). The
288 * creator clears when the thread is created. The protocol is not
289 * to signal the creator thread when the flag is on. However,
290 * a new thread should signal the creator if there are more
291 * requests in the queue.
292 *
293 * When the pool is closing (ie it has been already unregistered from
294 * the pool list) the last thread on the last transport should turn
295 * the p_creator_exit flag on. This tells the creator thread to
296 * free the pool structure and exit.
297 */
298 bool_t p_creator_signaled : 1; /* Create requested flag */
299 bool_t p_creator_exit : 1; /* If true creator exits */
300 kcondvar_t p_creator_cv; /* Creator cond. variable */
301 kmutex_t p_creator_lock; /* Creator lock */
302
303 /*
304 * Doubly linked list containing `registered' master transport handles.
305 * There is no special structure for a list node. Instead the
306 * SVCMASTERXPRT structure has the xp_next and xp_prev fields.
307 *
308 * The p_lrwlock protects access to xprt->xp_next and xprt->xp_prev.
309 * A service thread should also acquire a reader lock before accessing
310 * any transports it is no longer linked to (to prevent them from
311 * being destroyed).
312 *
313 * The list lock governs also the `pool is closing' flag.
314 */
315 size_t p_lcount; /* Current count */
316 SVCMASTERXPRT *p_lhead; /* List head */
317 krwlock_t p_lrwlock; /* R/W lock */
318
319 /*
320 * Circular linked list for the `xprt-ready' queue (FIFO).
321 * Must be initialized with svc_xprt_qinit() before it is used.
322 *
323 * The writer's end is protected by the pool's request lock
324 * (pool->p_req_lock). The reader's end is protected by q_end_lock.
325 *
326 * When the queue is full the p_qoverflow flag is raised. It stays
327 * on until all the pending request are drained.
328 */
329 size_t p_qsize; /* Number of queue nodes */
330 int p_qoverflow : 1; /* Overflow flag */
331 __SVCXPRT_QNODE *p_qbody; /* Queue body (array) */
332 __SVCXPRT_QNODE *p_qtop; /* Writer's end of FIFO */
333 __SVCXPRT_QNODE *p_qend; /* Reader's end of FIFO */
334 kmutex_t p_qend_lock; /* Reader's end lock */
335
336 /*
337 * Userspace thread creator variables.
338 * Thread creation is actually done in userland, via a thread
339 * that is parked in the kernel. When that thread is signaled,
340 * it returns back down to the daemon from whence it came and
341 * does the lwp create.
342 *
343 * A parallel "creator" thread runs in the kernel. That is the
344 * thread that will signal for the user thread to return to
345 * userland and do its work.
346 *
347 * Since the thread doesn't always exist (there could be a race
348 * if two threads are created in rapid succession), we set
349 * p_signal_create_thread to FALSE when we're ready to accept work.
350 *
351 * p_user_exit is set to true when the service pool is about
352 * to close. This is done so that the user creation thread
353 * can be informed and cleanup any userland state.
354 */
355
356 bool_t p_signal_create_thread : 1; /* Create requested flag */
357 bool_t p_user_exit : 1; /* If true creator exits */
358 bool_t p_user_waiting : 1; /* Thread waiting for work */
359 kcondvar_t p_user_cv; /* Creator cond. variable */
360 kmutex_t p_user_lock; /* Creator lock */
361 void (*p_offline)(); /* callout for unregister */
362 void (*p_shutdown)(); /* callout for shutdown */
363
364 size_t p_size; /* Total size of queued msgs */
365 };
366
367 /*
368 * Server side transport handle (SVCMASTERXPRT).
369 * xprt->xp_req_lock governs the following fields in xprt:
370 * xp_req_head, xp_req_tail.
371 * xprt->xp_thread_lock governs the following fields in xprt:
372 * xp_threads, xp_detached_threads.
373 *
374 * xp_req_tail is only valid if xp_req_head is non-NULL
375 *
376 * The xp_threads count is the number of attached threads. These threads
377 * are able to handle new requests, and it is expected that they will not
378 * block for a very long time handling a given request. The
379 * xp_detached_threads count is the number of threads that have detached
380 * themselves from the transport. These threads can block indefinitely
381 * while handling a request. Once they complete the request, they exit.
382 *
383 * A kernel service provider may register a callback function "closeproc"
384 * for a transport. When the transport is closing the last exiting attached
385 * thread - xp_threads goes to zero - it calls the callback function, passing
386 * it a reference to the transport. This call is made with xp_thread_lock
387 * held, so any cleanup bookkeeping it does should be done quickly.
388 *
389 * When the transport is closing the last exiting thread is supposed
390 * to destroy/free the data structure.
391 */
392 typedef struct __svcxprt_common {
393 struct file *xpc_fp;
394 struct svc_ops *xpc_ops;
395 queue_t *xpc_wq; /* queue to write onto */
396 cred_t *xpc_cred; /* cached cred for server to use */
397 int32_t xpc_type; /* transport type */
398 int xpc_msg_size; /* TSDU or TIDU size */
399 struct netbuf xpc_rtaddr; /* remote transport address */
400 struct netbuf xpc_lcladdr; /* local transport address */
401 char *xpc_netid; /* network token */
402 SVC_CALLOUT_TABLE *xpc_sct;
403 } __SVCXPRT_COMMON;
404
405 #define xp_fp xp_xpc.xpc_fp
406 #define xp_ops xp_xpc.xpc_ops
407 #define xp_wq xp_xpc.xpc_wq
408 #define xp_cred xp_xpc.xpc_cred
409 #define xp_type xp_xpc.xpc_type
410 #define xp_msg_size xp_xpc.xpc_msg_size
411 #define xp_rtaddr xp_xpc.xpc_rtaddr
412 #define xp_lcladdr xp_xpc.xpc_lcladdr
413 #define xp_sct xp_xpc.xpc_sct
414 #define xp_netid xp_xpc.xpc_netid
415
416 struct __svcmasterxprt {
417 SVCMASTERXPRT *xp_next; /* Next transport in the list */
418 SVCMASTERXPRT *xp_prev; /* Prev transport in the list */
419 __SVCXPRT_COMMON xp_xpc; /* Fields common with the clone */
420 SVCPOOL *xp_pool; /* Pointer to the pool */
421 mblk_t *xp_req_head; /* Request queue head */
422 mblk_t *xp_req_tail; /* Request queue tail */
423 kmutex_t xp_req_lock; /* Request lock */
424 int xp_threads; /* Current num. of attached threads */
425 int xp_detached_threads; /* num. of detached threads */
426 kmutex_t xp_thread_lock; /* Thread count lock */
427 void (*xp_closeproc)(const SVCMASTERXPRT *);
428 /* optional; see comments above */
429 struct netbuf xp_addrmask; /* address mask */
430
431 caddr_t xp_p2; /* private: for use by svc ops */
432
433 int xp_full : 1; /* xprt is full */
434 int xp_enable : 1; /* xprt needs to be enabled */
435 int xp_reqs; /* number of requests queued */
436 size_t xp_size; /* total size of queued msgs */
437 };
438
439 /*
440 * Service thread `clone' transport handle (SVCXPRT)
441 *
442 * PSARC 2003/523 Contract Private Interface
443 * SVCXPRT
444 * Changes must be reviewed by Solaris File Sharing
445 * Changes must be communicated to contract-2003-523@sun.com
446 *
447 * The xp_p2buf buffer is used as the storage for a transport type
448 * specific structure. It is private for the svc ops for a given
449 * transport type.
450 */
451
452 #define SVC_P2LEN 128
453
454 struct __svcxprt {
455 __SVCXPRT_COMMON xp_xpc;
456 SVCMASTERXPRT *xp_master; /* back ptr to master */
457
458 /* The following fileds are on a per-thread basis */
459 callb_cpr_t *xp_cprp; /* unused padding for Contract */
460 bool_t xp_reserved : 1; /* is thread reserved? */
461 bool_t xp_detached : 1; /* is thread detached? */
462 int xp_same_xprt; /* Reqs from the same xprt */
463
464 /* The following fields are used on a per-request basis */
465 struct opaque_auth xp_verf; /* raw response verifier */
466 SVCAUTH xp_auth; /* auth flavor of current req */
467 void *xp_cookie; /* a cookie */
468 uint32_t xp_xid; /* id */
469 XDR xp_xdrin; /* input xdr stream */
470 XDR xp_xdrout; /* output xdr stream */
471
472 /* Private for svc ops */
473 char xp_p2buf[SVC_P2LEN]; /* udp_data or cots_data_t */
474 /* or clone_rdma_data_t */
475 };
476 #else /* _KERNEL */
477 struct __svcxprt {
478 int xp_fd;
479 #define xp_sock xp_fd
480 ushort_t xp_port;
481 /*
482 * associated port number.
483 * Obsolete, but still used to
484 * specify whether rendezvouser
485 * or normal connection
486 */
487 struct xp_ops *xp_ops;
488 int xp_addrlen; /* length of remote addr. Obsoleted */
489 char *xp_tp; /* transport provider device name */
490 char *xp_netid; /* network token */
491 struct netbuf xp_ltaddr; /* local transport address */
492 struct netbuf xp_rtaddr; /* remote transport address */
493 char xp_raddr[16]; /* remote address. Now obsoleted */
494 struct opaque_auth xp_verf; /* raw response verifier */
495 caddr_t xp_p1; /* private: for use by svc ops */
496 caddr_t xp_p2; /* private: for use by svc ops */
497 caddr_t xp_p3; /* private: for use by svc lib */
498 int xp_type; /* transport type */
499 /*
500 * callback on client death
501 * First parameter is the current structure,
502 * Second parameter :
503 * - FALSE for the service listener
504 * - TRUE for a real connected socket
505 */
506 svc_errorhandler_t xp_closeclnt;
507 };
508 #endif /* _KERNEL */
509
510 /*
511 * Approved way of getting address of caller,
512 * address mask, and netid of transport.
513 */
514 #define svc_getrpccaller(x) (&(x)->xp_rtaddr)
515 #ifdef _KERNEL
516 #define svc_getcaller(x) (&(x)->xp_rtaddr.buf)
517 #define svc_getaddrmask(x) (&(x)->xp_master->xp_addrmask)
518 #define svc_getnetid(x) ((x)->xp_netid)
519 #endif /* _KERNEL */
520
521 /*
522 * Operations defined on an SVCXPRT handle
523 */
524
525 #ifdef _KERNEL
526
527 #define SVC_GETADDRMASK(clone_xprt, attrflag, tattr) \
528 (*(clone_xprt)->xp_ops->xp_tattrs)((clone_xprt), (attrflag), (tattr))
529
530 #define SVC_CLONE_XPRT(src_xprt, dst_xprt) \
531 if ((src_xprt)->xp_ops->xp_clone_xprt) \
532 (*(src_xprt)->xp_ops->xp_clone_xprt) \
533 (src_xprt, dst_xprt)
534
535 #define SVC_RECV(clone_xprt, mp, msg) \
536 (*(clone_xprt)->xp_ops->xp_recv)((clone_xprt), (mp), (msg))
537
538 /*
539 * PSARC 2003/523 Contract Private Interface
540 * SVC_GETARGS
541 * Changes must be reviewed by Solaris File Sharing
542 * Changes must be communicated to contract-2003-523@sun.com
543 */
544 #define SVC_GETARGS(clone_xprt, xargs, argsp) \
545 (*(clone_xprt)->xp_ops->xp_getargs)((clone_xprt), (xargs), (argsp))
546
547 #define SVC_REPLY(clone_xprt, msg) \
548 (*(clone_xprt)->xp_ops->xp_reply) ((clone_xprt), (msg))
549
550 #define SVC_FREEARGS(clone_xprt, xargs, argsp) \
551 (*(clone_xprt)->xp_ops->xp_freeargs)((clone_xprt), (xargs), (argsp))
552
553 #define SVC_GETRES(clone_xprt, size) \
554 (*(clone_xprt)->xp_ops->xp_getres)((clone_xprt), (size))
555
556 #define SVC_FREERES(clone_xprt) \
557 (*(clone_xprt)->xp_ops->xp_freeres)(clone_xprt)
558
559 #define SVC_DESTROY(xprt) \
560 (*(xprt)->xp_ops->xp_destroy)(xprt)
561
562 /*
563 * PSARC 2003/523 Contract Private Interfaces
564 * SVC_DUP, SVC_DUPDONE, SVC_DUP_EXT, SVC_DUPDONE_EXT
565 * Changes must be reviewed by Solaris File Sharing
566 * Changes must be communicated to contract-2003-523@sun.com
567 *
568 * SVC_DUP and SVC_DUPDONE are defined here for backward compatibility.
569 */
570 #define SVC_DUP_EXT(clone_xprt, req, res, size, drpp, dupcachedp) \
571 (*(clone_xprt)->xp_ops->xp_dup)(req, res, size, drpp, dupcachedp)
572
573 #define SVC_DUPDONE_EXT(clone_xprt, dr, res, resfree, size, status) \
574 (*(clone_xprt)->xp_ops->xp_dupdone)(dr, res, resfree, size, status)
575
576 #define SVC_DUP(clone_xprt, req, res, size, drpp) \
577 (*(clone_xprt)->xp_ops->xp_dup)(req, res, size, drpp, NULL)
578
579 #define SVC_DUPDONE(clone_xprt, dr, res, size, status) \
580 (*(clone_xprt)->xp_ops->xp_dupdone)(dr, res, NULL, size, status)
581
582 #define SVC_CLONE_DESTROY(clone_xprt) \
583 (*(clone_xprt)->xp_ops->xp_clone_destroy)(clone_xprt)
584
585
586 #define SVC_START(xprt) \
587 (*(xprt)->xp_ops->xp_start)(xprt)
588
589 #else /* _KERNEL */
590
591 #define SVC_RECV(xprt, msg) \
592 (*(xprt)->xp_ops->xp_recv)((xprt), (msg))
593 #define svc_recv(xprt, msg) \
594 (*(xprt)->xp_ops->xp_recv)((xprt), (msg))
595
596 #define SVC_STAT(xprt) \
597 (*(xprt)->xp_ops->xp_stat)(xprt)
598 #define svc_stat(xprt) \
599 (*(xprt)->xp_ops->xp_stat)(xprt)
600
601 #define SVC_GETARGS(xprt, xargs, argsp) \
602 (*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp))
603 #define svc_getargs(xprt, xargs, argsp) \
604 (*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp))
605
606 #define SVC_REPLY(xprt, msg) \
607 (*(xprt)->xp_ops->xp_reply) ((xprt), (msg))
608 #define svc_reply(xprt, msg) \
609 (*(xprt)->xp_ops->xp_reply) ((xprt), (msg))
610
611 #define SVC_FREEARGS(xprt, xargs, argsp) \
612 (*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp))
613 #define svc_freeargs(xprt, xargs, argsp) \
614 (*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp))
615
616 #define SVC_GETRES(xprt, size) \
617 (*(xprt)->xp_ops->xp_getres)((xprt), (size))
618 #define svc_getres(xprt, size) \
619 (*(xprt)->xp_ops->xp_getres)((xprt), (size))
620
621 #define SVC_FREERES(xprt) \
622 (*(xprt)->xp_ops->xp_freeres)(xprt)
623 #define svc_freeres(xprt) \
624 (*(xprt)->xp_ops->xp_freeres)(xprt)
625
626 #define SVC_DESTROY(xprt) \
627 (*(xprt)->xp_ops->xp_destroy)(xprt)
628 #define svc_destroy(xprt) \
629 (*(xprt)->xp_ops->xp_destroy)(xprt)
630
631 /*
632 * PSARC 2003/523 Contract Private Interface
633 * SVC_CONTROL
634 * Changes must be reviewed by Solaris File Sharing
635 * Changes must be communicated to contract-2003-523@sun.com
636 */
637 #define SVC_CONTROL(xprt, rq, in) \
638 (*(xprt)->xp_ops->xp_control)((xprt), (rq), (in))
639 #endif /* _KERNEL */
640
641 /*
642 * Pool id's reserved for NFS, NLM, and the NFSv4 callback program.
643 */
644 #define NFS_SVCPOOL_ID 0x01
645 #define NLM_SVCPOOL_ID 0x02
646 #define NFS_CB_SVCPOOL_ID 0x03
647 #define RDC_SVCPOOL_ID 0x05 /* SNDR, PSARC 2001/699 */
648
649 struct svcpool_args {
650 uint32_t id; /* Pool id */
651 uint32_t maxthreads; /* Max threads in the pool */
652 uint32_t redline; /* `Redline' for the pool */
653 uint32_t qsize; /* `xprt-ready' queue size */
654 uint32_t timeout; /* svc_poll() timeout */
655 uint32_t stksize; /* svc_run() stack size */
656 uint32_t max_same_xprt; /* Max reqs from the same xprt */
657 };
658
659
660 #ifdef _KERNEL
661 /*
662 * Transport registration and thread pool creation.
663 */
664 extern int svc_xprt_register(SVCMASTERXPRT *, int);
665 extern void svc_xprt_unregister(SVCMASTERXPRT *);
666 extern int svc_pool_create(struct svcpool_args *);
667 extern int svc_wait(int);
668 extern int svc_do_run(int);
669 #define SVCPSET_SHUTDOWN_PROC 1
670 #define SVCPSET_UNREGISTER_PROC 2
671 extern int svc_pool_control(int, int, void *);
672 #else /* _KERNEL */
673 #ifdef __STDC__
674 extern bool_t rpc_reg(const rpcprog_t, const rpcvers_t, const rpcproc_t,
675 char *(*)(char *), const xdrproc_t, const xdrproc_t,
676 const char *);
677
678 /*
679 * Service registration
680 *
681 * svc_reg(xprt, prog, vers, dispatch, nconf)
682 * const SVCXPRT *xprt;
683 * const rpcprog_t prog;
684 * const rpcvers_t vers;
685 * const void (*dispatch)();
686 * const struct netconfig *nconf;
687 */
688 extern bool_t svc_reg(const SVCXPRT *, const rpcprog_t, const rpcvers_t,
689 void (*)(struct svc_req *, SVCXPRT *),
690 const struct netconfig *);
691
692 /*
693 * Service authentication registration
694 *
695 * svc_auth_reg(cred_flavor, handler)
696 * int cred_flavor;
697 * enum auth_stat (*handler)();
698 */
699 extern int svc_auth_reg(int, enum auth_stat (*)());
700
701 /*
702 * Service un-registration
703 *
704 * svc_unreg(prog, vers)
705 * const rpcprog_t prog;
706 * const rpcvers_t vers;
707 */
708 extern void svc_unreg(const rpcprog_t, const rpcvers_t);
709
710 /*
711 * Transport registration/unregistration.
712 *
713 * xprt_register(xprt)
714 * const SVCXPRT *xprt;
715 *
716 * xprt_unregister(xprt)
717 * const SVCXPRT *xprt;
718 */
719 extern void xprt_register(const SVCXPRT *);
720 extern void xprt_unregister(const SVCXPRT *);
721 #else /* __STDC__ */
722 extern bool_t rpc_reg();
723 extern bool_t svc_reg();
724 extern bool_t svc_auth_reg();
725 extern void svc_unreg();
726 extern void xprt_register();
727 extern void xprt_unregister();
728 #endif /* __STDC__ */
729 #endif /* _KERNEL */
730
731
732 /*
733 * When the service routine is called, it must first check to see if it
734 * knows about the procedure; if not, it should call svcerr_noproc
735 * and return. If so, it should deserialize its arguments via
736 * SVC_GETARGS (defined above). If the deserialization does not work,
737 * svcerr_decode should be called followed by a return. Successful
738 * decoding of the arguments should be followed the execution of the
739 * procedure's code and a call to svc_sendreply.
740 *
741 * Also, if the service refuses to execute the procedure due to too-
742 * weak authentication parameters, svcerr_weakauth should be called.
743 * Note: do not confuse access-control failure with weak authentication!
744 *
745 * NB: In pure implementations of rpc, the caller always waits for a reply
746 * msg. This message is sent when svc_sendreply is called.
747 * Therefore pure service implementations should always call
748 * svc_sendreply even if the function logically returns void; use
749 * xdr.h - xdr_void for the xdr routine. HOWEVER, connectionful rpc allows
750 * for the abuse of pure rpc via batched calling or pipelining. In the
751 * case of a batched call, svc_sendreply should NOT be called since
752 * this would send a return message, which is what batching tries to avoid.
753 * It is the service/protocol writer's responsibility to know which calls are
754 * batched and which are not. Warning: responding to batch calls may
755 * deadlock the caller and server processes!
756 */
757 #ifdef __STDC__
758 extern bool_t svc_sendreply(const SVCXPRT *, const xdrproc_t, const caddr_t);
759 extern void svcerr_decode(const SVCXPRT *);
760 extern void svcerr_weakauth(const SVCXPRT *);
761 extern void svcerr_noproc(const SVCXPRT *);
762 extern void svcerr_progvers(const SVCXPRT *, const rpcvers_t,
763 const rpcvers_t);
764 extern void svcerr_auth(const SVCXPRT *, const enum auth_stat);
765 extern void svcerr_noprog(const SVCXPRT *);
766 extern void svcerr_systemerr(const SVCXPRT *);
767 extern void svcerr_badcred(const SVCXPRT *);
768 #else /* __STDC__ */
769 extern bool_t svc_sendreply();
770 extern void svcerr_decode();
771 extern void svcerr_weakauth();
772 extern void svcerr_noproc();
773 extern void svcerr_progvers();
774 extern void svcerr_auth();
775 extern void svcerr_noprog();
776 extern void svcerr_systemerr();
777 extern void svcerr_badcred();
778 #endif /* __STDC__ */
779
780 #ifdef _KERNEL
781 /*
782 * Kernel RPC functions.
783 */
784 extern void svc_init(void);
785 extern void svc_cots_init(void);
786 extern void svc_clts_init(void);
787 extern void mt_kstat_init(void);
788 extern void mt_kstat_fini(void);
789 extern int svc_tli_kcreate(struct file *, uint_t, char *,
790 struct netbuf *, SVCMASTERXPRT **,
791 SVC_CALLOUT_TABLE *,
792 void (*closeproc)(const SVCMASTERXPRT *),
793 int, bool_t);
794 extern int svc_clts_kcreate(struct file *, uint_t, struct T_info_ack *,
795 SVCMASTERXPRT **);
796 extern int svc_cots_kcreate(struct file *, uint_t, struct T_info_ack *,
797 SVCMASTERXPRT **);
798 extern bool_t svc_queuereq(queue_t *, mblk_t *, bool_t);
799 extern void svc_queueclean(queue_t *);
800 extern void svc_queueclose(queue_t *);
801 extern int svc_reserve_thread(SVCXPRT *);
802 extern void svc_unreserve_thread(SVCXPRT *);
803 extern callb_cpr_t *svc_detach_thread(SVCXPRT *);
804
805 /*
806 * For RDMA based kRPC.
807 * "rdma_xprt_record" is a reference to master transport handles
808 * in kRPC thread pools. This is an easy way of tracking and shuting
809 * down rdma based kRPC transports on demand.
810 * "rdma_xprt_group" is a list of RDMA based mster transport handles
811 * or records in a kRPC thread pool.
812 */
813 typedef struct rdma_xprt_record rdma_xprt_record_t;
814 struct rdma_xprt_record {
815 int rtr_type; /* Type of rdma; IB/VI/RDDP */
816 SVCMASTERXPRT *rtr_xprt_ptr; /* Ptr to master xprt handle */
817 rdma_xprt_record_t *rtr_next; /* Ptr to next record */
818 };
819
820 typedef struct {
821 int rtg_count; /* Number transport records */
822 int rtg_poolid; /* Pool Id for this group */
823 rdma_xprt_record_t *rtg_listhead; /* Head of the records list */
824 } rdma_xprt_group_t;
825
826 extern int svc_rdma_kcreate(char *, SVC_CALLOUT_TABLE *, int,
827 rdma_xprt_group_t *);
828 extern void svc_rdma_kstop(SVCMASTERXPRT *);
829 extern void svc_rdma_kdestroy(SVCMASTERXPRT *);
830 extern void rdma_stop(rdma_xprt_group_t *);
831
832 /*
833 * GSS cleanup method.
834 */
835 extern void rpc_gss_cleanup(SVCXPRT *);
836 #else /* _KERNEL */
837 /*
838 * Lowest level dispatching -OR- who owns this process anyway.
839 * Somebody has to wait for incoming requests and then call the correct
840 * service routine. The routine svc_run does infinite waiting; i.e.,
841 * svc_run never returns.
842 * Since another (co-existant) package may wish to selectively wait for
843 * incoming calls or other events outside of the rpc architecture, the
844 * routine svc_getreq_poll is provided. It must be passed pollfds, the
845 * "in-place" results of a poll call (see poll, section 2).
846 */
847
848 /*
849 * Global keeper of rpc service descriptors in use
850 * dynamic; must be inspected before each call to select or poll
851 */
852 extern pollfd_t *svc_pollfd;
853 extern int svc_max_pollfd;
854 extern fd_set svc_fdset;
855 #define svc_fds svc_fdset.fds_bits[0] /* compatibility */
856
857 /*
858 * A small program implemented by the svc_rpc implementation itself.
859 * Also see clnt.h for protocol numbers.
860 */
861 #ifdef __STDC__
862 extern void svc_getreq(int);
863 extern void svc_getreq_common(const int);
864 extern void svc_getreqset(fd_set *); /* takes fdset instead of int */
865 extern void svc_getreq_poll(struct pollfd *, const int);
866 extern void svc_run(void);
867 extern void svc_exit(void);
868 #else /* __STDC__ */
869 extern void rpctest_service();
870 extern void svc_getreqset();
871 extern void svc_getreq();
872 extern void svc_getreq_common();
873 extern void svc_getreqset(); /* takes fdset instead of int */
874 extern void svc_getreq_poll();
875 extern void svc_run();
876 extern void svc_exit();
877 #endif /* __STDC__ */
878
879 /*
880 * Functions used to manage user file descriptors
881 */
882 typedef int svc_input_id_t;
883 typedef void (*svc_callback_t)(svc_input_id_t id, int fd,
884 unsigned int events, void* cookie);
885
886 #ifdef __STDC__
887 extern svc_input_id_t svc_add_input(int fd, unsigned int events,
888 svc_callback_t user_callback,
889 void* cookie);
890 extern int svc_remove_input(svc_input_id_t id);
891 #else /* __STDC__ */
892 extern svc_input_id_t svc_add_input();
893 extern int svc_remove_input();
894 #endif
895
896 /*
897 * These are the existing service side transport implementations.
898 *
899 * Transport independent svc_create routine.
900 */
901 #ifdef __STDC__
902 extern int svc_create(void (*)(struct svc_req *, SVCXPRT *),
903 const rpcprog_t, const rpcvers_t,
904 const char *);
905 /*
906 * void (*dispatch)(); -- dispatch routine
907 * const rpcprog_t prognum; -- program number
908 * const rpcvers_t versnum; -- version number
909 * const char *nettype; -- network type
910 */
911
912 /*
913 * Generic server creation routine. It takes a netconfig structure
914 * instead of a nettype.
915 */
916 extern SVCXPRT *svc_tp_create(void (*)(struct svc_req *, SVCXPRT *),
917 const rpcprog_t, const rpcvers_t,
918 const struct netconfig *);
919 /*
920 * void (*dispatch)(); -- dispatch routine
921 * const rpcprog_t prognum; -- program number
922 * const rpcvers_t versnum; -- version number
923 * const struct netconfig *nconf; -- netconfig structure
924 */
925
926 /*
927 * Generic TLI create routine
928 */
929 extern SVCXPRT *svc_tli_create(const int, const struct netconfig *,
930 const struct t_bind *, const uint_t,
931 const uint_t);
932 /*
933 * const int fd; -- connection end point
934 * const struct netconfig *nconf; -- netconfig structure
935 * const struct t_bind *bindaddr; -- local bind address
936 * const uint_t sendsz; -- max sendsize
937 * const uint_t recvsz; -- max recvsize
938 */
939
940 /*
941 * Connectionless and connectionful create routines.
942 */
943 extern SVCXPRT *svc_vc_create(const int, const uint_t, const uint_t);
944 /*
945 * const int fd; -- open connection end point
946 * const uint_t sendsize; -- max send size
947 * const uint_t recvsize; -- max recv size
948 */
949
950 extern SVCXPRT *svc_dg_create(const int, const uint_t, const uint_t);
951 /*
952 * const int fd; -- open connection
953 * const uint_t sendsize; -- max send size
954 * const uint_t recvsize; -- max recv size
955 */
956
957 /*
958 * the routine takes any *open* TLI file
959 * descriptor as its first input and is used for open connections.
960 */
961 extern SVCXPRT *svc_fd_create(const int, const uint_t, const uint_t);
962 /*
963 * const int fd; -- open connection end point
964 * const uint_t sendsize; -- max send size
965 * const uint_t recvsize; -- max recv size
966 */
967
968 /*
969 * Memory based rpc (for speed check and testing)
970 */
971 extern SVCXPRT *svc_raw_create(void);
972
973 /*
974 * Creation of service over doors transport.
975 */
976 extern SVCXPRT *svc_door_create(void (*)(struct svc_req *, SVCXPRT *),
977 const rpcprog_t, const rpcvers_t,
978 const uint_t);
979 /*
980 * void (*dispatch)(); -- dispatch routine
981 * const rpcprog_t prognum; -- program number
982 * const rpcvers_t versnum; -- version number
983 * const uint_t sendsize; -- send buffer size
984 */
985
986 /*
987 * Service control interface
988 */
989 extern bool_t svc_control(SVCXPRT *, const uint_t, void *);
990 /*
991 * SVCXPRT *svc; -- service to manipulate
992 * const uint_t req; -- request
993 * void *info; -- argument to request
994 */
995
996 /*
997 * svc_dg_enable_cache() enables the cache on dg transports.
998 */
999 extern int svc_dg_enablecache(SVCXPRT *, const uint_t);
1000 #else /* __STDC__ */
1001 extern int svc_create();
1002 extern SVCXPRT *svc_tp_create();
1003 extern SVCXPRT *svc_tli_create();
1004 extern SVCXPRT *svc_vc_create();
1005 extern SVCXPRT *svc_dg_create();
1006 extern SVCXPRT *svc_fd_create();
1007 extern SVCXPRT *svc_raw_create();
1008 extern SVCXPRT *svc_door_create();
1009 extern int svc_dg_enablecache();
1010 #endif /* __STDC__ */
1011
1012 extern boolean_t is_multilevel(rpcprog_t);
1013
1014 #ifdef PORTMAP
1015 /* For backward compatibility */
1016 #include <rpc/svc_soc.h>
1017 #endif /* PORTMAP */
1018
1019 /*
1020 * For user level MT hot server functions
1021 */
1022
1023 /*
1024 * Different MT modes
1025 */
1026 #define RPC_SVC_MT_NONE 0 /* default, single-threaded */
1027 #define RPC_SVC_MT_AUTO 1 /* automatic MT mode */
1028 #define RPC_SVC_MT_USER 2 /* user MT mode */
1029
1030 #ifdef __STDC__
1031 extern void svc_done(SVCXPRT *);
1032 #else
1033 extern void svc_done();
1034 #endif /* __STDC__ */
1035
1036 /*
1037 * Obtaining local credentials.
1038 */
1039 typedef struct __svc_local_cred_t {
1040 uid_t euid; /* effective uid */
1041 gid_t egid; /* effective gid */
1042 uid_t ruid; /* real uid */
1043 gid_t rgid; /* real gid */
1044 pid_t pid; /* caller's pid, or -1 if not available */
1045 } svc_local_cred_t;
1046
1047 #ifdef __STDC__
1048 struct ucred_s;
1049 extern void svc_fd_negotiate_ucred(int);
1050 extern int svc_getcallerucred(const SVCXPRT *, struct ucred_s **);
1051 extern bool_t svc_get_local_cred(SVCXPRT *, svc_local_cred_t *);
1052 #else
1053 extern void svc_fd_negotiate_ucred();
1054 extern int svc_getcallerucred();
1055 extern bool_t svc_get_local_cred();
1056 #endif /* __STDC__ */
1057
1058 /*
1059 * Private interfaces and structures for user level duplicate request caching.
1060 * The interfaces and data structures are not committed and subject to
1061 * change in future releases. Currently only intended for use by automountd.
1062 */
1063 struct dupreq {
1064 uint32_t dr_xid;
1065 rpcproc_t dr_proc;
1066 rpcvers_t dr_vers;
1067 rpcprog_t dr_prog;
1068 struct netbuf dr_addr;
1069 struct netbuf dr_resp;
1070 int dr_status;
1071 time_t dr_time;
1072 uint_t dr_hash;
1073 struct dupreq *dr_next;
1074 struct dupreq *dr_prev;
1075 struct dupreq *dr_chain;
1076 struct dupreq *dr_prevchain;
1077 };
1078
1079 /*
1080 * The fixedtime state is defined if we want to expand the routines to
1081 * handle and encompass fixed size caches.
1082 */
1083 #define DUPCACHE_FIXEDTIME 0
1084
1085 /*
1086 * States of requests for duplicate request caching.
1087 * These are the same as defined for the kernel.
1088 */
1089 #define DUP_NEW 0x00 /* new entry */
1090 #define DUP_INPROGRESS 0x01 /* request already going */
1091 #define DUP_DONE 0x02 /* request done */
1092 #define DUP_DROP 0x03 /* request dropped */
1093 #define DUP_ERROR 0x04 /* error in dup req cache */
1094
1095 #ifdef __STDC__
1096 extern bool_t __svc_dupcache_init(void *, int, char **);
1097 extern int __svc_dup(struct svc_req *, caddr_t *, uint_t *, char *);
1098 extern int __svc_dupdone(struct svc_req *, caddr_t, uint_t, int, char *);
1099 extern bool_t __svc_vc_dupcache_init(SVCXPRT *, void *, int);
1100 extern int __svc_vc_dup(struct svc_req *, caddr_t *, uint_t *);
1101 extern int __svc_vc_dupdone(struct svc_req *, caddr_t, uint_t, int);
1102 #else
1103 extern bool_t __svc_dupcache_init();
1104 extern int __svc_dup();
1105 extern int __svc_dupdone();
1106 extern bool_t __svc_vc_dupcache_init();
1107 extern int __svc_vc_dup();
1108 extern int __svc_vc_dupdone();
1109 #endif /* __STDC__ */
1110 #endif /* _KERNEL */
1111
1112 #ifdef _KERNEL
1113 /*
1114 * Private interfaces and structures for SVCXPRT cloning.
1115 * The interfaces and data structures are not committed and subject to
1116 * change in future releases.
1117 */
1118 extern SVCXPRT *svc_clone_init(void);
1119 extern void svc_clone_free(SVCXPRT *);
1120 extern void svc_clone_link(SVCMASTERXPRT *, SVCXPRT *, SVCXPRT *);
1121 extern void svc_clone_unlink(SVCXPRT *);
1122 #endif /* _KERNEL */
1123
1124 #ifdef __cplusplus
1125 }
1126 #endif
1127
1128 #endif /* !_RPC_SVC_H */