1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2006 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 /* 27 * Copyright 2013 Garrett D'Amore <garrett@damore.org> 28 */ 29 30 #ifndef _SYS_FEATURE_TESTS_H 31 #define _SYS_FEATURE_TESTS_H 32 33 #include <sys/ccompile.h> 34 #include <sys/isa_defs.h> 35 36 #ifdef __cplusplus 37 extern "C" { 38 #endif 39 40 /* 41 * Values of _POSIX_C_SOURCE 42 * 43 * undefined not a POSIX compilation 44 * 1 POSIX.1-1990 compilation 45 * 2 POSIX.2-1992 compilation 46 * 199309L POSIX.1b-1993 compilation (Real Time) 47 * 199506L POSIX.1c-1995 compilation (POSIX Threads) 48 * 200112L POSIX.1-2001 compilation (Austin Group Revision) 49 * 200809L POSIX.1-2008 compilation 50 */ 51 #if defined(_POSIX_SOURCE) && !defined(_POSIX_C_SOURCE) 52 #define _POSIX_C_SOURCE 1 53 #endif 54 55 /* 56 * The feature test macros __XOPEN_OR_POSIX, _STRICT_STDC, _STRICT_SYMBOLS, 57 * and _STDC_C99 are Sun implementation specific macros created in order to 58 * compress common standards specified feature test macros for easier reading. 59 * These macros should not be used by the application developer as 60 * unexpected results may occur. Instead, the user should reference 61 * standards(5) for correct usage of the standards feature test macros. 62 * 63 * __XOPEN_OR_POSIX Used in cases where a symbol is defined by both 64 * X/Open or POSIX or in the negative, when neither 65 * X/Open or POSIX defines a symbol. 66 * 67 * _STRICT_STDC __STDC__ is specified by the C Standards and defined 68 * by the compiler. For Sun compilers the value of 69 * __STDC__ is either 1, 0, or not defined based on the 70 * compilation mode (see cc(1)). When the value of 71 * __STDC__ is 1 and in the absence of any other feature 72 * test macros, the namespace available to the application 73 * is limited to only those symbols defined by the C 74 * Standard. _STRICT_STDC provides a more readable means 75 * of identifying symbols defined by the standard, or in 76 * the negative, symbols that are extensions to the C 77 * Standard. See additional comments for GNU C differences. 78 * 79 * _STDC_C99 __STDC_VERSION__ is specified by the C standards and 80 * defined by the compiler and indicates the version of 81 * the C standard. A value of 199901L indicates a 82 * compiler that complies with ISO/IEC 9899:1999, other- 83 * wise known as the C99 standard. 84 * 85 * _STRICT_SYMBOLS Used in cases where symbol visibility is restricted 86 * by the standards, and the user has not explicitly 87 * relaxed the strictness via __EXTENSIONS__. 88 */ 89 90 #if defined(_XOPEN_SOURCE) || defined(_POSIX_C_SOURCE) 91 #define __XOPEN_OR_POSIX 92 #endif 93 94 /* 95 * ISO/IEC 9899:1990 and it's revision, ISO/IEC 9899:1999 specify the 96 * following predefined macro name: 97 * 98 * __STDC__ The integer constant 1, intended to indicate a conforming 99 * implementation. 100 * 101 * Furthermore, a strictly conforming program shall use only those features 102 * of the language and library specified in these standards. A conforming 103 * implementation shall accept any strictly conforming program. 104 * 105 * Based on these requirements, Sun's C compiler defines __STDC__ to 1 for 106 * strictly conforming environments and __STDC__ to 0 for environments that 107 * use ANSI C semantics but allow extensions to the C standard. For non-ANSI 108 * C semantics, Sun's C compiler does not define __STDC__. 109 * 110 * The GNU C project interpretation is that __STDC__ should always be defined 111 * to 1 for compilation modes that accept ANSI C syntax regardless of whether 112 * or not extensions to the C standard are used. Violations of conforming 113 * behavior are conditionally flagged as warnings via the use of the 114 * -pedantic option. In addition to defining __STDC__ to 1, the GNU C 115 * compiler also defines __STRICT_ANSI__ as a means of specifying strictly 116 * conforming environments using the -ansi or -std=<standard> options. 117 * 118 * In the absence of any other compiler options, Sun and GNU set the value 119 * of __STDC__ as follows when using the following options: 120 * 121 * Value of __STDC__ __STRICT_ANSI__ 122 * 123 * cc -Xa (default) 0 undefined 124 * cc -Xt (transitional) 0 undefined 125 * cc -Xc (strictly conforming) 1 undefined 126 * cc -Xs (K&R C) undefined undefined 127 * 128 * gcc (default) 1 undefined 129 * gcc -ansi, -std={c89, c99,...) 1 defined 130 * gcc -traditional (K&R) undefined undefined 131 * 132 * The default compilation modes for Sun C compilers versus GNU C compilers 133 * results in a differing value for __STDC__ which results in a more 134 * restricted namespace when using Sun compilers. To allow both GNU and Sun 135 * interpretations to peacefully co-exist, we use the following Sun 136 * implementation _STRICT_STDC_ macro: 137 */ 138 139 #if (__STDC__ - 0 == 1 && !defined(__GNUC__)) || \ 140 (defined(__GNUC__) && defined(__STRICT_ANSI__)) 141 #define _STRICT_STDC 142 #else 143 #undef _STRICT_STDC 144 #endif 145 146 /* 147 * Compiler complies with ISO/IEC 9899:1999 148 */ 149 150 #if __STDC_VERSION__ - 0 >= 199901L 151 #define _STDC_C99 152 #endif 153 154 /* 155 * Use strict symbol visibility. 156 */ 157 #if (defined(_STRICT_STDC) || defined(__XOPEN_OR_POSIX)) && \ 158 !defined(__EXTENSIONS__) 159 #define _STRICT_SYMBOLS 160 #endif 161 162 /* 163 * Large file interfaces: 164 * 165 * _LARGEFILE_SOURCE 166 * 1 large file-related additions to POSIX 167 * interfaces requested (fseeko, etc.) 168 * _LARGEFILE64_SOURCE 169 * 1 transitional large-file-related interfaces 170 * requested (seek64, stat64, etc.) 171 * 172 * The corresponding announcement macros are respectively: 173 * _LFS_LARGEFILE 174 * _LFS64_LARGEFILE 175 * (These are set in <unistd.h>.) 176 * 177 * Requesting _LARGEFILE64_SOURCE implies requesting _LARGEFILE_SOURCE as 178 * well. 179 * 180 * The large file interfaces are made visible regardless of the initial values 181 * of the feature test macros under certain circumstances: 182 * - If no explicit standards-conforming environment is requested (neither 183 * of _POSIX_SOURCE nor _XOPEN_SOURCE is defined and the value of 184 * __STDC__ does not imply standards conformance). 185 * - Extended system interfaces are explicitly requested (__EXTENSIONS__ 186 * is defined). 187 * - Access to in-kernel interfaces is requested (_KERNEL or _KMEMUSER is 188 * defined). (Note that this dependency is an artifact of the current 189 * kernel implementation and may change in future releases.) 190 */ 191 #if (!defined(_STRICT_STDC) && !defined(__XOPEN_OR_POSIX)) || \ 192 defined(_KERNEL) || defined(_KMEMUSER) || \ 193 defined(__EXTENSIONS__) 194 #undef _LARGEFILE64_SOURCE 195 #define _LARGEFILE64_SOURCE 1 196 #endif 197 #if _LARGEFILE64_SOURCE - 0 == 1 198 #undef _LARGEFILE_SOURCE 199 #define _LARGEFILE_SOURCE 1 200 #endif 201 202 /* 203 * Large file compilation environment control: 204 * 205 * The setting of _FILE_OFFSET_BITS controls the size of various file-related 206 * types and governs the mapping between file-related source function symbol 207 * names and the corresponding binary entry points. 208 * 209 * In the 32-bit environment, the default value is 32; if not set, set it to 210 * the default here, to simplify tests in other headers. 211 * 212 * In the 64-bit compilation environment, the only value allowed is 64. 213 */ 214 #if defined(_LP64) 215 #ifndef _FILE_OFFSET_BITS 216 #define _FILE_OFFSET_BITS 64 217 #endif 218 #if _FILE_OFFSET_BITS - 0 != 64 219 #error "invalid _FILE_OFFSET_BITS value specified" 220 #endif 221 #else /* _LP64 */ 222 #ifndef _FILE_OFFSET_BITS 223 #define _FILE_OFFSET_BITS 32 224 #endif 225 #if _FILE_OFFSET_BITS - 0 != 32 && _FILE_OFFSET_BITS - 0 != 64 226 #error "invalid _FILE_OFFSET_BITS value specified" 227 #endif 228 #endif /* _LP64 */ 229 230 /* 231 * Use of _XOPEN_SOURCE 232 * 233 * The following X/Open specifications are supported: 234 * 235 * X/Open Portability Guide, Issue 3 (XPG3) 236 * X/Open CAE Specification, Issue 4 (XPG4) 237 * X/Open CAE Specification, Issue 4, Version 2 (XPG4v2) 238 * X/Open CAE Specification, Issue 5 (XPG5) 239 * Open Group Technical Standard, Issue 6 (XPG6), also referred to as 240 * IEEE Std. 1003.1-2001 and ISO/IEC 9945:2002. 241 * Open Group Technical Standard, Issue 7 (XPG7), also referred to as 242 * IEEE Std. 1003.1-2008 and ISO/IEC 9945:2009. 243 * 244 * XPG4v2 is also referred to as UNIX 95 (SUS or SUSv1). 245 * XPG5 is also referred to as UNIX 98 or the Single Unix Specification, 246 * Version 2 (SUSv2) 247 * XPG6 is the result of a merge of the X/Open and POSIX specifications 248 * and as such is also referred to as IEEE Std. 1003.1-2001 in 249 * addition to UNIX 03 and SUSv3. 250 * XPG7 is also referred to as UNIX 08 and SUSv4. 251 * 252 * When writing a conforming X/Open application, as per the specification 253 * requirements, the appropriate feature test macros must be defined at 254 * compile time. These are as follows. For more info, see standards(5). 255 * 256 * Feature Test Macro Specification 257 * ------------------------------------------------ ------------- 258 * _XOPEN_SOURCE XPG3 259 * _XOPEN_SOURCE && _XOPEN_VERSION = 4 XPG4 260 * _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED = 1 XPG4v2 261 * _XOPEN_SOURCE = 500 XPG5 262 * _XOPEN_SOURCE = 600 (or POSIX_C_SOURCE=200112L) XPG6 263 * _XOPEN_SOURCE = 700 (or POSIX_C_SOURCE=200809L) XPG7 264 * 265 * In order to simplify the guards within the headers, the following 266 * implementation private test macros have been created. Applications 267 * must NOT use these private test macros as unexpected results will 268 * occur. 269 * 270 * Note that in general, the use of these private macros is cumulative. 271 * For example, the use of _XPG3 with no other restrictions on the X/Open 272 * namespace will make the symbols visible for XPG3 through XPG6 273 * compilation environments. The use of _XPG4_2 with no other X/Open 274 * namespace restrictions indicates that the symbols were introduced in 275 * XPG4v2 and are therefore visible for XPG4v2 through XPG6 compilation 276 * environments, but not for XPG3 or XPG4 compilation environments. 277 * 278 * _XPG3 X/Open Portability Guide, Issue 3 (XPG3) 279 * _XPG4 X/Open CAE Specification, Issue 4 (XPG4) 280 * _XPG4_2 X/Open CAE Specification, Issue 4, Version 2 (XPG4v2/UNIX 95/SUS) 281 * _XPG5 X/Open CAE Specification, Issue 5 (XPG5/UNIX 98/SUSv2) 282 * _XPG6 Open Group Technical Standard, Issue 6 (XPG6/UNIX 03/SUSv3) 283 * _XPG7 Open Group Technical Standard, Issue 7 (XPG7/UNIX 08/SUSv4) 284 */ 285 286 /* X/Open Portability Guide, Issue 3 */ 287 #if defined(_XOPEN_SOURCE) && (_XOPEN_SOURCE - 0 < 500) && \ 288 (_XOPEN_VERSION - 0 < 4) && !defined(_XOPEN_SOURCE_EXTENDED) 289 #define _XPG3 290 /* X/Open CAE Specification, Issue 4 */ 291 #elif (defined(_XOPEN_SOURCE) && _XOPEN_VERSION - 0 == 4) 292 #define _XPG4 293 #define _XPG3 294 /* X/Open CAE Specification, Issue 4, Version 2 */ 295 #elif (defined(_XOPEN_SOURCE) && _XOPEN_SOURCE_EXTENDED - 0 == 1) 296 #define _XPG4_2 297 #define _XPG4 298 #define _XPG3 299 /* X/Open CAE Specification, Issue 5 */ 300 #elif (_XOPEN_SOURCE - 0 == 500) 301 #define _XPG5 302 #define _XPG4_2 303 #define _XPG4 304 #define _XPG3 305 #undef _POSIX_C_SOURCE 306 #define _POSIX_C_SOURCE 199506L 307 /* Open Group Technical Standard , Issue 6 */ 308 #elif (_XOPEN_SOURCE - 0 == 600) || (_POSIX_C_SOURCE - 0 == 200112L) 309 #define _XPG6 310 #define _XPG5 311 #define _XPG4_2 312 #define _XPG4 313 #define _XPG3 314 #undef _POSIX_C_SOURCE 315 #define _POSIX_C_SOURCE 200112L 316 #undef _XOPEN_SOURCE 317 #define _XOPEN_SOURCE 600 318 319 /* Open Group Technical Standard, Issue 7 */ 320 #elif (_XOPEN_SOURCE - 0 == 700) || (_POSIX_C_SOURCE - 0 == 200809L) 321 #define _XPG7 322 #define _XPG6 323 #define _XPG5 324 #define _XPG4_2 325 #define _XPG4 326 #define _XPG3 327 #undef _POSIX_C_SOURCE 328 #define _POSIX_C_SOURCE 200809L 329 #undef _XOPEN_SOURCE 330 #define _XOPEN_SOURCE 700 331 #endif 332 333 /* 334 * _XOPEN_VERSION is defined by the X/Open specifications and is not 335 * normally defined by the application, except in the case of an XPG4 336 * application. On the implementation side, _XOPEN_VERSION defined with 337 * the value of 3 indicates an XPG3 application. _XOPEN_VERSION defined 338 * with the value of 4 indicates an XPG4 or XPG4v2 (UNIX 95) application. 339 * _XOPEN_VERSION defined with a value of 500 indicates an XPG5 (UNIX 98) 340 * application and with a value of 600 indicates an XPG6 (UNIX 03) 341 * application and with a value of 700 indicates an XPG7 (UNIX 08). 342 * The appropriate version is determined by the use of the 343 * feature test macros described earlier. The value of _XOPEN_VERSION 344 * defaults to 3 otherwise indicating support for XPG3 applications. 345 */ 346 #ifndef _XOPEN_VERSION 347 #if defined(_XPG7) 348 #define _XOPEN_VERSION 700 349 #elif defined(_XPG6) 350 #define _XOPEN_VERSION 600 351 #elif defined(_XPG5) 352 #define _XOPEN_VERSION 500 353 #elif defined(_XPG4_2) 354 #define _XOPEN_VERSION 4 355 #else 356 #define _XOPEN_VERSION 3 357 #endif 358 #endif 359 360 /* 361 * ANSI C and ISO 9899:1990 say the type long long doesn't exist in strictly 362 * conforming environments. ISO 9899:1999 says it does. 363 * 364 * The presence of _LONGLONG_TYPE says "long long exists" which is therefore 365 * defined in all but strictly conforming environments that disallow it. 366 */ 367 #if !defined(_STDC_C99) && defined(_STRICT_STDC) && !defined(__GNUC__) 368 /* 369 * Resist attempts to force the definition of long long in this case. 370 */ 371 #if defined(_LONGLONG_TYPE) 372 #error "No long long in strictly conforming ANSI C & 1990 ISO C environments" 373 #endif 374 #else 375 #if !defined(_LONGLONG_TYPE) 376 #define _LONGLONG_TYPE 377 #endif 378 #endif 379 380 /* 381 * It is invalid to compile an XPG3, XPG4, XPG4v2, or XPG5 application 382 * using c99. The same is true for POSIX.1-1990, POSIX.2-1992, POSIX.1b, 383 * and POSIX.1c applications. Likewise, it is invalid to compile an XPG6 384 * or a POSIX.1-2001 application with anything other than a c99 or later 385 * compiler. Therefore, we force an error in both cases. 386 */ 387 #if defined(_STDC_C99) && (defined(__XOPEN_OR_POSIX) && !defined(_XPG6)) 388 #error "Compiler or options invalid for pre-UNIX 03 X/Open applications \ 389 and pre-2001 POSIX applications" 390 #elif !defined(_STDC_C99) && \ 391 (defined(__XOPEN_OR_POSIX) && defined(_XPG6)) 392 #error "Compiler or options invalid; UNIX 03 and POSIX.1-2001 applications \ 393 require the use of c99" 394 #endif 395 396 /* 397 * The following macro defines a value for the ISO C99 restrict 398 * keyword so that _RESTRICT_KYWD resolves to "restrict" if 399 * an ISO C99 compiler is used and "" (null string) if any other 400 * compiler is used. This allows for the use of single prototype 401 * declarations regardless of compiler version. 402 */ 403 #if (defined(__STDC__) && defined(_STDC_C99)) && !defined(__cplusplus) 404 #define _RESTRICT_KYWD restrict 405 #else 406 #define _RESTRICT_KYWD 407 #endif 408 409 /* 410 * The following macro indicates header support for the ANSI C++ 411 * standard. The ISO/IEC designation for this is ISO/IEC FDIS 14882. 412 */ 413 #define _ISO_CPP_14882_1998 414 415 /* 416 * The following macro indicates header support for the C99 standard, 417 * ISO/IEC 9899:1999, Programming Languages - C. 418 */ 419 #define _ISO_C_9899_1999 420 421 /* 422 * The following macro indicates header support for DTrace. The value is an 423 * integer that corresponds to the major version number for DTrace. 424 */ 425 #define _DTRACE_VERSION 1 426 427 #ifdef __cplusplus 428 } 429 #endif 430 431 #endif /* _SYS_FEATURE_TESTS_H */