Print this page
manpage lint.
| Split |
Close |
| Expand all |
| Collapse all |
--- old/usr/src/man/man1/tar.1
+++ new/usr/src/man/man1/tar.1
1 1 '\" te
2 2 .\" Copyright 1989 AT&T
3 3 .\" Copyright (c) 2006, Sun Microsystems, Inc. All Rights Reserved
4 4 .\" Copyright 2012 Milan Jurik. All rights reserved.
5 5 .\" Copyright (c) 2013, Joyent, Inc. All rights reserved.
6 6 .\" Portions Copyright (c) 1992, X/Open Company Limited All Rights Reserved
7 7 .\" Sun Microsystems, Inc. gratefully acknowledges The Open Group for permission to reproduce portions of its copyrighted documentation. Original documentation from The Open Group can be obtained online at
8 8 .\" http://www.opengroup.org/bookstore/.
9 9 .\" The Institute of Electrical and Electronics Engineers and The Open Group, have given us permission to reprint portions of their documentation. In the following statement, the phrase "this text" refers to portions of the system documentation. Portions of this text are reprinted and reproduced in electronic form in the Sun OS Reference Manual, from IEEE Std 1003.1, 2004 Edition, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2004 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between these versions and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html.
10 10 .\" This notice shall appear on any product containing this material.
11 11 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
12 12 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
13 13 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
14 14 .TH TAR 1 "Jan 16, 2013"
15 15 .SH NAME
16 16 tar \- create tape archives and add or extract files
17 17 .SH SYNOPSIS
18 18 .LP
19 19 .nf
20 20 \fBtar\fR c[BDeEFhilnopPqTvw@/[0-7]][bfk][X...][a|j|J|z|Z] [\fIblocksize\fR]
21 21 [\fItarfile\fR] [\fIsize\fR] [\fIexclude-file\fR]...
22 22 {\fIfile\fR | \(miI \fIinclude-file\fR | \(miC \fIdirectory\fR \fIfile\fR}...
23 23 .fi
24 24
25 25 .LP
26 26 .nf
27 27 \fBtar\fR r[BDeEFhilnqTvw@/[0-7]][bfk][j|J|z|Z] [\fIblocksize\fR] [\fItarfile\fR]
28 28 [\fIsize\fR]
29 29 {\fIfile\fR | \(miI \fIinclude-file\fR | \(miC \fIdirectory\fR \fIfile\fR}...
30 30 .fi
31 31
32 32 .LP
33 33 .nf
34 34 \fBtar\fR t[BeFhilnqTv[0-7]][fk][X...][j|J|z|Z] [\fItarfile\fR] [\fIsize\fR]
35 35 [\fIexclude-file\fR]... {\fIfile\fR | \(miI \fIinclude-file\fR}...
36 36 .fi
37 37
38 38 .LP
39 39 .nf
40 40 \fBtar\fR u[BDeEFhilnqTvw@/[0-7]][bfk][j|J|z|Z] [\fIblocksize\fR] [\fItarfile\fR]
41 41 [\fIsize\fR] \fIfile\fR...
42 42 .fi
43 43
44 44 .LP
45 45 .nf
46 46 \fBtar\fR x[BeFhilmnopqTvw@/[0-7]][fk][X...][j|J|z|Z] [\fItarfile\fR] [\fIsize\fR]
47 47 [\fIexclude-file\fR]... [\(miC \fIdirectory\fR] [\fIfile\fR]...
48 48 .fi
49 49
50 50 .SH DESCRIPTION
51 51 .sp
52 52 .LP
53 53 The \fBtar\fR command archives and extracts files to and from a single file
54 54 called a \fItarfile\fR. A tarfile is usually a magnetic tape, but it can be any
55 55 file. \fBtar\fR's actions are controlled by the \fIkey\fR argument. The
56 56 \fIkey\fR is a string of characters containing exactly one function letter
57 57 (\fBc\fR, \fBr\fR, \fBt\fR , \fBu\fR, or \fBx\fR) and zero or more function
58 58 modifiers (letters or digits), depending on the function letter used. The
59 59 \fIkey\fR string contains no SPACE characters. Function modifier arguments are
60 60 listed on the command line in the same order as their corresponding function
61 61 modifiers appear in the \fIkey\fR string.
62 62 .sp
63 63 .LP
64 64 The \fB\(miI\fR \fIinclude-file\fR, \fB\(miC\fR \fIdirectory file\fR, and
65 65 \fIfile\fR arguments specify which files or directories are to be archived or
66 66 extracted. In all cases, appearance of a directory name refers to the files and
67 67 (recursively) subdirectories of that directory. Arguments appearing within
68 68 braces (\fB{ }\fR) indicate that one of the arguments must be specified.
69 69 .SH OPERANDS
70 70 .sp
71 71 .LP
72 72 The following operands are supported:
73 73 .sp
74 74 .ne 2
75 75 .na
76 76 \fB\fB\(miC\fR \fIdirectory file\fR\fR
77 77 .ad
78 78 .sp .6
79 79 .RS 4n
80 80 Performs a \fBchdir\fR (see \fBcd\fR(1)) operation on \fIdirectory\fR and
81 81 performs the \fBc\fR (create) or \fBr\fR (replace) operation on \fIfile\fR. Use
82 82 short relative path names for \fIfile\fR. If \fIfile\fR is "\fB\&.\fR", archive
83 83 all files in \fIdirectory\fR. This operand enables archiving files from
84 84 multiple directories not related by a close common parent.
85 85 .sp
86 86 This option may also be passed once to \fBx\fR (extract). In this case the
87 87 program will \fBchdir\fR to \fIdirectory\fR after opening the archive, but
88 88 before extracting its contents.
89 89 .RE
90 90
91 91 .sp
92 92 .ne 2
93 93 .na
94 94 \fB\fB\(miI\fR \fIinclude-file\fR\fR
95 95 .ad
96 96 .sp .6
97 97 .RS 4n
98 98 Opens \fIinclude-file\fR containing a list of files, one per line, and treats
99 99 it as if each file appeared separately on the command line. Be careful of
100 100 trailing white spaces. Also beware of leading white spaces, since, for each
101 101 line in the included file, the entire line (apart from the newline) is used to
102 102 match against the initial string of files to include. In the case where
103 103 excluded files (see \fBX\fR function modifier) are also specified, they take
104 104 precedence over all included files. If a file is specified in both the
105 105 \fIexclude-file\fR and the \fIinclude-file\fR (or on the command line), it is
106 106 excluded.
107 107 .RE
108 108
109 109 .sp
110 110 .ne 2
111 111 .na
112 112 \fB\fIfile\fR\fR
113 113 .ad
114 114 .sp .6
115 115 .RS 4n
116 116 A path name of a regular file or directory to be archived (when the \fBc\fR,
117 117 \fBr\fR or \fBu\fR functions are specified), extracted (\fBx\fR) or listed
118 118 (\fBt\fR). When \fIfile\fR is the path name of a directory, the action applies
119 119 to all of the files and (recursively) subdirectories of that directory.
120 120 .sp
121 121 When a file is archived, and the \fBE\fR flag (see \fBFunction Modifiers\fR) is
122 122 not specified, the filename cannot exceed 256 characters. In addition, it must
123 123 be possible to split the name between parent directory names so that the prefix
124 124 is no longer than 155 characters and the name is no longer than 100 characters.
125 125 If \fBE\fR is specified, a name of up to \fIPATH_MAX\fR characters can be
126 126 specified.
127 127 .sp
128 128 For example, a file whose basename is longer than 100 characters could not be
129 129 archived without using the \fBE\fR flag. A file whose directory portion is 200
130 130 characters and whose basename is 50 characters could be archived (without using
131 131 \fBE\fR) if a slash appears in the directory name somewhere in character
132 132 positions 151-156.
133 133 .RE
134 134
135 135 .SS "Function Letters"
136 136 .sp
137 137 .LP
138 138 The function portion of the key is specified by one of the following letters:
139 139 .sp
140 140 .ne 2
141 141 .na
142 142 \fB\fBc\fR\fR
143 143 .ad
144 144 .sp .6
145 145 .RS 4n
146 146 Create. Writing begins at the beginning of the tarfile, instead of at the end.
147 147 .RE
148 148
149 149 .sp
150 150 .ne 2
151 151 .na
152 152 \fB\fBr\fR\fR
153 153 .ad
154 154 .sp .6
155 155 .RS 4n
156 156 Replace. The named \fIfile\fRs are written at the end of the tarfile. A file
157 157 created with extended headers must be updated with extended headers (see
158 158 \fBE\fR flag under \fBFunction Modifiers\fR). A file created without extended
159 159 headers cannot be modified with extended headers.
160 160 .RE
161 161
162 162 .sp
163 163 .ne 2
164 164 .na
165 165 \fB\fBt\fR\fR
166 166 .ad
167 167 .sp .6
168 168 .RS 4n
169 169 Table of Contents. The names of the specified files are listed each time they
170 170 occur in the tarfile. If no \fIfile\fR argument is specified, the names of all
171 171 files and any associated extended attributes in the tarfile are listed. With
172 172 the \fBv\fR function modifier, additional information for the specified files
173 173 is displayed.
174 174 .RE
175 175
176 176 .sp
177 177 .ne 2
178 178 .na
179 179 \fB\fBu\fR\fR
180 180 .ad
181 181 .sp .6
182 182 .RS 4n
183 183 Update. The named \fIfile\fRs are written at the end of the tarfile if they are
184 184 not already in the tarfile, or if they have been modified since last written to
185 185 that tarfile. An update can be rather slow. A tarfile created on a 5.x system
186 186 cannot be updated on a 4.x system. A file created with extended headers must be
187 187 updated with extended headers (see \fBE\fR flag under \fBFunction
188 188 Modifiers\fR). A file created without extended headers cannot be modified with
189 189 extended headers.
190 190 .RE
191 191
192 192 .sp
193 193 .ne 2
194 194 .na
195 195 \fB\fBx\fR\fR
196 196 .ad
197 197 .sp .6
198 198 .RS 4n
199 199 Extract or restore. The named \fIfile\fRs are extracted from the tarfile and
200 200 written to the directory specified in the tarfile, relative to the current
201 201 directory. Use the relative path names of files and directories to be
202 202 extracted.
203 203 .sp
204 204 Absolute path names contained in the tar archive are unpacked using the
205 205 absolute path names, that is, the leading forward slash (\fB/\fR) is \fBnot\fR
206 206 stripped off.
207 207 .sp
208 208 If a named file matches a directory whose contents has been written to the
209 209 tarfile, this directory is recursively extracted. The owner, modification time,
210 210 and mode are restored (if possible); otherwise, to restore owner, you must be
211 211 the super-user. Character-special and block-special devices (created by
212 212 \fBmknod\fR(1M)) can only be extracted by the super-user. If no \fIfile\fR
213 213 argument is specified, the entire content of the tarfile is extracted. If the
214 214 tarfile contains several files with the same name, each file is written to the
215 215 appropriate directory, overwriting the previous one. Filename substitution
216 216 wildcards cannot be used for extracting files from the archive. Rather, use a
217 217 command of the form:
218 218 .sp
219 219 .in +2
220 220 .nf
221 221 \fBtar xvf ... /dev/rmt/0 \(gatar tf ... /dev/rmt/0 | \e
222 222 grep '\fIpattern\fR' \(ga\fR
223 223 .fi
224 224 .in -2
225 225 .sp
226 226
227 227 .RE
228 228
229 229 .sp
230 230 .LP
231 231 When extracting tapes created with the \fBr\fR or \fBu\fR functions, directory
232 232 modification times can not be set correctly. These same functions cannot be
233 233 used with many tape drives due to tape drive limitations such as the absence of
234 234 backspace or append capabilities.
235 235 .sp
236 236 .LP
237 237 When using the \fBr\fR, \fBu\fR, or \fBx\fR functions or the \fBX\fR function
238 238 modifier, the named files must match exactly the corresponding files in the
239 239 \fItarfile\fR. For example, to extract \fB\&./\fR\fIthisfile\fR, you must
240 240 specify \fB\&./\fR\fIthisfile,\fR and not \fIthisfile\fR. The \fBt\fR function
241 241 displays how each file was archived.
242 242 .SS "Function Modifiers"
243 243 .sp
244 244 .LP
245 245 The characters below can be used in conjunction with the letter that selects
246 246 the desired function.
247 247 .sp
248 248 .ne 2
249 249 .na
250 250 \fB\fBa\fR\fR
251 251 .ad
252 252 .sp .6
253 253 .RS 4n
254 254 During a \fBcreate\fR operation autodetect compression based on the archive
255 255 suffix.
256 256 .RE
257 257
258 258 .sp
259 259 .ne 2
260 260 .na
261 261 \fB\fBb\fR \fIblocksize\fR\fR
262 262 .ad
263 263 .sp .6
264 264 .RS 4n
265 265 Blocking Factor. Use when reading or writing to raw magnetic archives (see
266 266 \fBf\fR below). The \fIblocksize\fR argument specifies the number of 512-byte
267 267 tape blocks to be included in each read or write operation performed on the
268 268 tarfile. The minimum is \fB1\fR, the default is \fB20\fR. The maximum value is
269 269 a function of the amount of memory available and the blocking requirements of
270 270 the specific tape device involved (see \fBmtio\fR(7I) for details.) The maximum
271 271 cannot exceed \fBINT_MAX\fR/512 (\fB4194303\fR).
272 272 .sp
273 273 When a tape archive is being read, its actual blocking factor is automatically
274 274 detected, provided that it is less than or equal to the nominal blocking factor
275 275 (the value of the \fIblocksize\fR argument, or the default value if the \fBb\fR
276 276 modifier is not specified). If the actual blocking factor is greater than the
277 277 nominal blocking factor, a read error results. See Example 5 in EXAMPLES.
278 278 .RE
279 279
280 280 .sp
281 281 .ne 2
282 282 .na
283 283 \fB\fBB\fR\fR
284 284 .ad
285 285 .sp .6
286 286 .RS 4n
287 287 Block. Force \fBtar\fR to perform multiple reads (if necessary) to read exactly
288 288 enough bytes to fill a block. This function modifier enables \fBtar\fR to work
289 289 across the Ethernet, since pipes and sockets return partial blocks even when
290 290 more data is coming. When reading from standard input, "\fB\(mi\fR", this
291 291 function modifier is selected by default to ensure that \fBtar\fR can recover
292 292 from short reads.
293 293 .RE
294 294
295 295 .sp
296 296 .ne 2
297 297 .na
298 298 \fB\fBD\fR\fR
299 299 .ad
300 300 .sp .6
301 301 .RS 4n
302 302 Data change warnings. Used with \fBc\fR, \fBr\fR, or \fBu\fR function letters.
303 303 Ignored with \fBt\fR or \fBx\fR function letters. If the size of a file changes
304 304 while the file is being archived, treat this condition as a warning instead of
305 305 as an error. A warning message is still written, but the exit status is not
306 306 affected.
307 307 .RE
308 308
309 309 .sp
310 310 .ne 2
311 311 .na
312 312 \fB\fBe\fR\fR
313 313 .ad
314 314 .sp .6
315 315 .RS 4n
316 316 Error. Exit immediately with a positive exit status if any unexpected errors
317 317 occur. The \fBSYSV3\fR environment variable overrides the default behavior.
318 318 (See ENVIRONMENT VARIABLES section below.)
319 319 .RE
320 320
321 321 .sp
322 322 .ne 2
323 323 .na
324 324 \fB\fBE\fR\fR
325 325 .ad
326 326 .sp .6
327 327 .RS 4n
328 328 Write a tarfile with extended headers. (Used with \fBc\fR, \fBr\fR, or \fBu\fR
329 329 function letters. Ignored with \fBt\fR or \fBx\fR function letters.) When a
330 330 tarfile is written with extended headers, the modification time is maintained
331 331 with a granularity of microseconds rather than seconds. In addition, filenames
332 332 no longer than \fBPATH_MAX\fR characters that could not be archived without
333 333 \fBE\fR, and file sizes greater than \fB8GB\fR, are supported. The \fBE\fR flag
334 334 is required whenever the larger files and/or files with longer names, or whose
335 335 \fBUID/GID\fR exceed \fB2097151\fR, are to be archived, or if time granularity
336 336 of microseconds is desired.
337 337 .RE
338 338
339 339 .sp
340 340 .ne 2
341 341 .na
342 342 \fB\fBf\fR\fR
343 343 .ad
344 344 .sp .6
345 345 .RS 4n
346 346 File. Use the \fItarfile\fR argument as the name of the tarfile. If \fBf\fR is
347 347 specified, \fB/etc/default/tar\fR is not searched. If \fBf\fR is omitted,
348 348 \fBtar\fR uses the device indicated by the \fBTAPE\fR environment variable, if
349 349 set. Otherwise, \fBtar\fR uses the default values defined in
350 350 \fB/etc/default/tar\fR. The number matching the \fBarchive\fR\fIN\fR string is
351 351 used as the output device with the blocking and size specifications from the
352 352 file. For example,
353 353 .sp
354 354 .in +2
355 355 .nf
356 356 \fBtar -c 2/tmp/*\fR
357 357 .fi
358 358 .in -2
359 359 .sp
360 360
361 361 writes the output to the device specified as \fBarchive2\fR in
362 362 \fB/etc/default/tar\fR.
363 363 .sp
364 364 If the name of the tarfile is "\fB\(mi\fR", \fBtar\fR writes to the standard
365 365 output or reads from the standard input, whichever is appropriate. \fBtar\fR
366 366 can be used as the head or tail of a pipeline. \fBtar\fR can also be used to
367 367 move hierarchies with the command:
368 368 .sp
369 369 .in +2
370 370 .nf
371 371 example% \fBcd fromdir; tar cf \(mi .| (cd todir; tar xfBp \(mi)\fR
372 372 .fi
373 373 .in -2
374 374 .sp
375 375
376 376 .RE
377 377
378 378 .sp
379 379 .ne 2
380 380 .na
381 381 \fB\fBF\fR\fR
382 382 .ad
383 383 .sp .6
384 384 .RS 4n
385 385 With one \fBF\fR argument, \fBtar\fR excludes all directories named \fBSCCS\fR
386 386 and \fBRCS\fR from the tarfile. With two arguments, \fBFF\fR, \fBtar\fR
387 387 excludes all directories named SCCS and RCS, all files with \fB\&.o\fR as their
388 388 suffix, and all files named \fBerrs\fR, \fBcore\fR, and \fBa.out\fR. The
389 389 \fBSYSV3\fR environment variable overrides the default behavior. (See
390 390 ENVIRONMENT VARIABLES section below.)
391 391 .RE
392 392
393 393 .sp
394 394 .ne 2
395 395 .na
396 396 \fB\fBh\fR\fR
397 397 .ad
398 398 .sp .6
399 399 .RS 4n
400 400 Follow symbolic links as if they were normal files or directories. Normally,
401 401 \fBtar\fR does not follow symbolic links.
402 402 .RE
403 403
404 404 .sp
405 405 .ne 2
406 406 .na
407 407 \fB\fBi\fR\fR
408 408 .ad
409 409 .sp .6
410 410 .RS 4n
411 411 Ignore directory checksum errors.
412 412 .RE
413 413
414 414 .sp
415 415 .ne 2
416 416 .na
417 417 \fB\fBj\fR\fR
418 418 .ad
419 419 .sp .6
420 420 .RS 4n
421 421 Use \fBbzip2\fR for compressing or decompressing the archives.
422 422 .RE
423 423
424 424 .sp
425 425 .ne 2
426 426 .na
427 427 \fB\fBJ\fR\fR
428 428 .ad
429 429 .sp .6
430 430 .RS 4n
431 431 Use \fBxz\fR for compressing or decompressing the archives.
432 432 .RE
433 433
434 434 .sp
435 435 .ne 2
436 436 .na
437 437 \fB\fBk\fR \fIsize\fR\fR
438 438 .ad
439 439 .sp .6
440 440 .RS 4n
441 441 Requires \fBtar\fR to use the size argument as the size of an archive in
442 442 kilobytes. This is useful when the archive is intended for a fixed size device
443 443 such as floppy disks. Large files are then split across volumes if they do not
444 444 fit in the specified size.
445 445 .RE
446 446
447 447 .sp
448 448 .ne 2
449 449 .na
450 450 \fB\fBl\fR\fR
451 451 .ad
452 452 .sp .6
453 453 .RS 4n
454 454 Link. Output error message if unable to resolve all links to the files being
455 455 archived. If \fBl\fR is not specified, no error messages are printed.
456 456 .RE
457 457
458 458 .sp
459 459 .ne 2
460 460 .na
461 461 \fB\fBm\fR\fR
462 462 .ad
463 463 .sp .6
464 464 .RS 4n
465 465 Modify. The modification time of the file is the time of extraction. This
466 466 function modifier is valid only with the \fBx\fR function.
467 467 .RE
468 468
469 469 .sp
470 470 .ne 2
471 471 .na
472 472 \fB\fBn\fR\fR
473 473 .ad
474 474 .sp .6
475 475 .RS 4n
476 476 The file being read is a non-tape device. Reading of the archive is faster
477 477 since \fBtar\fR can randomly seek around the archive.
478 478 .RE
479 479
480 480 .sp
481 481 .ne 2
482 482 .na
483 483 \fB\fBo\fR\fR
484 484 .ad
485 485 .sp .6
486 486 .RS 4n
487 487 Ownership. Assign to extracted files the user and group identifiers of the user
488 488 running the program, rather than those on tarfile. This is the default behavior
489 489 for users other than root. If the \fBo\fR function modifier is not set and the
490 490 user is root, the extracted files takes on the group and user identifiers of
491 491 the files on tarfile (see \fBchown\fR(1) for more information). The \fBo\fR
492 492 function modifier is only valid with the \fBx\fR function.
493 493 .RE
494 494
495 495 .sp
496 496 .ne 2
497 497 .na
498 498 \fB\fBp\fR\fR
499 499 .ad
500 500 .sp .6
501 501 .RS 4n
502 502 Restore the named files to their original modes, and \fBACL\fRs if applicable,
503 503 ignoring the present \fBumask\fR(1). This is the default behavior if invoked as
504 504 super-user with the \fBx\fR function letter specified. If super-user,
505 505 \fBSETUID\fR, and sticky information are also extracted, and files are restored
506 506 with their original owners and permissions, rather than owned by root. When
507 507 this function modifier is used with the \fBc\fR function, \fBACL\fRs are
508 508 created in the tarfile along with other information. Errors occur when a
509 509 tarfile with \fBACL\fRs is extracted by previous versions of \fBtar\fR.
510 510 .RE
511 511
512 512 .sp
513 513 .ne 2
514 514 .na
515 515 \fB\fBP\fR\fR
516 516 .ad
517 517 .sp .6
518 518 .RS 4n
519 519 Suppress the addition of a trailing "\fB/\fR" on directory entries in the
520 520 archive.
521 521 .RE
522 522
523 523 .sp
524 524 .ne 2
525 525 .na
526 526 \fB\fBq\fR\fR
527 527 .ad
528 528 .sp .6
529 529 .RS 4n
530 530 Stop after extracting the first occurrence of the named file. \fBtar\fR
531 531 normally continues reading the archive after finding an occurrence of a file.
532 532 .RE
533 533
534 534 .sp
535 535 .ne 2
536 536 .na
537 537 \fB\fBT\fR\fR
538 538 .ad
539 539 .sp .6
540 540 .RS 4n
541 541 This modifier is only available if the system is configured with Trusted
542 542 Extensions.
543 543 .sp
544 544 When this modifier is used with the function letter \fBc\fR, \fBr,\fR or
545 545 \fBu\fR for creating, replacing or updating a tarfile, the sensitivity label
546 546 associated with each archived file and directory is stored in the tarfile.
547 547 .sp
548 548 Specifying \fBT\fR implies the function modifier \fBp\fR.
549 549 .sp
550 550 When used with the function letter \fBx\fR for extracting a tarfile, the tar
551 551 program verifies that the file's sensitivity label specified in the archive
552 552 equals the sensitivity label of the destination directory. If not, the file is
553 553 not restored. This operation must be invoked from the global zone. If the
554 554 archived file has a relative pathname, it is restored to the corresponding
555 555 directory with the same label, if available. This is done by prepending to the
556 556 current destination directory the root pathname of the zone whose label equals
557 557 the file. If no such zone exists, the file is not restored.
558 558 .sp
559 559 Limited support is provided for extracting labeled archives from Trusted
560 560 Solaris 8. Only sensitivity labels, and multi-level directory specifications
561 561 are interpreted. Privilege specifications and audit attribute flags are
562 562 silently ignored. Multilevel directory specifications including symbolic links
563 563 to single level directories are are mapped into zone-relative pathnames if a
564 564 zone with the same label is available. This support is intended to facilitate
565 565 migration of home directories. Architectural differences preclude the
566 566 extraction of arbitrarily labeled files from Trusted Solaris 8 into identical
567 567 pathnames in Trusted Extensions. Files cannot be extracted unless their
568 568 archived label matches the destination label.
569 569 .RE
570 570
571 571 .sp
572 572 .ne 2
573 573 .na
574 574 \fB\fBv\fR\fR
575 575 .ad
576 576 .sp .6
577 577 .RS 4n
578 578 Verbose. Output the name of each file preceded by the function letter. With the
579 579 \fBt\fR function, \fBv\fR provides additional information about the tarfile
580 580 entries. The listing is similar to the format produced by the \fB-l\fR option
581 581 of the \fBls\fR(1) command.
582 582 .RE
583 583
584 584 .sp
585 585 .ne 2
586 586 .na
587 587 \fB\fBw\fR\fR
588 588 .ad
589 589 .sp .6
590 590 .RS 4n
591 591 What. Output the action to be taken and the name of the file, then await the
592 592 user's confirmation. If the response is affirmative, the action is performed;
593 593 otherwise, the action is not performed. This function modifier cannot be used
594 594 with the \fBt\fR function.
595 595 .RE
596 596
597 597 .sp
598 598 .ne 2
599 599 .na
600 600 \fB\fBX\fR\fR
601 601 .ad
602 602 .sp .6
603 603 .RS 4n
604 604 Exclude. Use the \fIexclude-file\fR argument as a file containing a list of
605 605 relative path names for files (or directories) to be excluded from the tarfile
606 606 when using the functions \fBc\fR, \fBx\fR, or \fBt\fR. Be careful of trailing
607 607 white spaces. Also beware of leading white spaces, since, for each line in the
608 608 excluded file, the entire line (apart from the newline) is used to match
609 609 against the initial string of files to exclude. Lines in the exclude file are
610 610 matched exactly, so an entry like "\fB/var\fR" does \fBnot\fR exclude the
611 611 \fB/var\fR directory if \fBtar\fR is backing up relative pathnames. The entry
612 612 should read "\fB\&./var\fR" under these circumstances. The \fBtar\fR command
613 613 does not expand shell metacharacters in the exclude file, so specifying entries
614 614 like "\fB*.o\fR" does not have the effect of excluding all files with names
615 615 suffixed with "\fB\&.o\fR". If a complex list of files is to be excluded, the
616 616 exclude file should be generated by some means such as the \fBfind\fR(1)
617 617 command with appropriate conditions.
618 618 .sp
619 619 Multiple \fBX\fR arguments can be used, with one \fIexclude-file\fR per
620 620 argument. In the case where included files (see \fB\(miI\fR \fIinclude-file\fR
621 621 operand) are also specified, the excluded files take precedence over all
622 622 included files. If a file is specified in both the \fIexclude-file\fR and the
623 623 \fIinclude-file\fR (or on the command line), it is excluded.
624 624 .RE
625 625
626 626 .sp
627 627 .ne 2
628 628 .na
629 629 \fB\fBz\fR\fR
630 630 .ad
631 631 .sp .6
632 632 .RS 4n
633 633 Use \fBgzip\fR for compressing or decompressing the archives.
634 634 .RE
635 635
636 636 .sp
637 637 .ne 2
638 638 .na
639 639 \fB\fBZ\fR\fR
640 640 .ad
641 641 .sp .6
642 642 .RS 4n
643 643 Use \fBcompress\fR for compressing or decompressing the archives.
644 644 .RE
645 645
646 646 .sp
647 647 .ne 2
648 648 .na
649 649 \fB\fB@\fR\fR
650 650 .ad
651 651 .sp .6
652 652 .RS 4n
653 653 Include extended attributes in archive. By default, \fBtar\fR does not place
654 654 extended attributes in the archive. With this flag, \fBtar\fR looks for
655 655 extended attributes on the files to be placed in the archive and add them to
656 656 the archive. Extended attributes go in the archive as special files with a
657 657 special type label. When this modifier is used with the \fBx\fR function,
658 658 extended attributes are extracted from the tape along with the normal file
659 659 data. Extended attribute files can only be extracted from an archive as part of
660 660 a normal file extract. Attempts to explicitly extract attribute records are
661 661 ignored.
662 662 .RE
663 663
664 664 .sp
665 665 .ne 2
666 666 .na
667 667 \fB\fB/\fR\fR
668 668 .ad
669 669 .sp .6
670 670 .RS 4n
671 671 Include extended system attributes in archive. By default, \fBtar\fR does not
672 672 place extended system attributes in the archive. With this flag, \fBtar\fR
673 673 looks for extended system attributes on the files to be placed in the archive
674 674 and adds them to the archive. Extended system attributes go in the archive as
675 675 special files with a special type label. When this modifier is used with the
676 676 \fBx\fR function, extended system attributes are extracted from the tape along
677 677 with the normal file data. Extended system attribute files can only be
678 678 extracted from an archive as part of a normal file extract. Attempts to
679 679 explicitly extract attribute records are ignored.
680 680 .RE
681 681
682 682 .sp
683 683 .ne 2
684 684 .na
685 685 \fB\fB[0-7]\fR\fR
686 686 .ad
687 687 .sp .6
688 688 .RS 4n
689 689 Select an alternative drive on which the tape is mounted. The default entries
690 690 are specified in \fB/etc/default/tar\fR. If no digit or \fBf\fR function
691 691 modifier is specified, the entry in \fB/etc/default/tar\fR with digit "\fB0\fR"
692 692 is the default.
693 693 .RE
694 694
695 695 .SH USAGE
696 696 .sp
697 697 .LP
698 698 See \fBlargefile\fR(5) for the description of the behavior of \fBtar\fR when
699 699 encountering files greater than or equal to 2 Gbyte ( 2^31 bytes).
700 700 .sp
701 701 .LP
702 702 The automatic determination of the actual blocking factor can be fooled when
703 703 reading from a pipe or a socket (see the \fBB\fR function modifier below).
704 704 .sp
705 705 .LP
706 706 1/4" streaming tape has an inherent blocking factor of one 512-byte block. It
707 707 can be read or written using any blocking factor.
708 708 .sp
709 709 .LP
710 710 This function modifier works for archives on disk files and block special
711 711 devices, among others, but is intended principally for tape devices.
712 712 .sp
713 713 .LP
714 714 For information on \fBtar\fR header format, see \fBarchives.h\fR(3HEAD).
715 715 .SH EXAMPLES
716 716 .LP
717 717 \fBExample 1 \fRCreating an archive of your home directory
718 718 .sp
719 719 .LP
720 720 The following is an example using \fBtar\fR to create an archive of your home
721 721 directory on a tape mounted on drive \fB/dev/rmt/0\fR:
722 722
723 723 .sp
724 724 .in +2
725 725 .nf
726 726 example% \fBcd\fR
727 727 example% \fBtar cvf /dev/rmt/0\fR .
728 728 \fImessages from\fR tar
729 729 .fi
730 730 .in -2
731 731 .sp
732 732
733 733 .sp
734 734 .LP
735 735 The \fBc\fR function letter means create the archive. The \fBv\fR function
736 736 modifier outputs messages explaining what \fBtar\fR is doing. The \fBf\fR
737 737 function modifier indicates that the tarfile is being specified
738 738 (\fB/dev/rmt/0\fR in this example). The dot (\fB\&.\fR) at the end of the
739 739 command line indicates the current directory and is the argument of the \fBf\fR
740 740 function modifier.
741 741
742 742 .sp
743 743 .LP
744 744 Display the table of contents of the tarfile with the following command:
745 745
746 746 .sp
747 747 .in +2
748 748 .nf
749 749 example% \fBtar tvf /dev/rmt/0\fR
750 750 .fi
751 751 .in -2
752 752 .sp
753 753
754 754 .sp
755 755 .LP
756 756 The output is similar to the following for the POSIX locale:
757 757
758 758 .sp
759 759 .in +2
760 760 .nf
761 761 rw\(mir\(mi\(mir\(mi\(mi 1677/40 2123 Nov 7 18:15 1985 ./test.c
762 762 \&...
763 763 example%
764 764 .fi
765 765 .in -2
766 766 .sp
767 767
768 768 .sp
769 769 .LP
770 770 The columns have the following meanings:
771 771
772 772 .RS +4
773 773 .TP
774 774 .ie t \(bu
775 775 .el o
776 776 column 1 is the access permissions to \fB\&./test.c\fR
777 777 .RE
778 778 .RS +4
779 779 .TP
780 780 .ie t \(bu
781 781 .el o
782 782 column 2 is the \fIuser-id\fR/\fIgroup-id\fR of \fB\&./test.c\fR
783 783 .RE
784 784 .RS +4
785 785 .TP
786 786 .ie t \(bu
787 787 .el o
788 788 column 3 is the size of \fB\&./test.c\fR in bytes
789 789 .RE
790 790 .RS +4
791 791 .TP
792 792 .ie t \(bu
793 793 .el o
794 794 column 4 is the modification date of \fB\&./test.c\fR. When the \fBLC_TIME\fR
795 795 category is not set to the POSIX locale, a different format and date order
796 796 field can be used.
797 797 .RE
798 798 .RS +4
799 799 .TP
800 800 .ie t \(bu
801 801 .el o
802 802 column 5 is the name of \fB\&./test.c\fR
803 803 .RE
804 804 .sp
805 805 .LP
806 806 To extract files from the archive:
807 807
808 808 .sp
809 809 .in +2
810 810 .nf
811 811 example% \fBtar xvf /dev/rmt/0\fR
812 812 \fImessages from\fR tar
813 813 example%
814 814 .fi
815 815 .in -2
816 816 .sp
817 817
818 818 .sp
819 819 .LP
820 820 If there are multiple archive files on a tape, each is separated from the
821 821 following one by an EOF marker. To have \fBtar\fR read the first and second
822 822 archives from a tape with multiple archives on it, the \fInon-rewinding\fR
823 823 version of the tape device name must be used with the \fBf\fR function
824 824 modifier, as follows:
825 825
826 826 .sp
827 827 .in +2
828 828 .nf
829 829 example% \fBtar xvfp /dev/rmt/0n \fIread first archive from tape\fR\fR
830 830 \fImessages from\fR tar
831 831 example% \fBtar xvfp /dev/rmt/0n \fIread second archive from tape\fR\fR
832 832 \fImessages from\fR tar
833 833 example%
834 834 .fi
835 835 .in -2
836 836 .sp
837 837
838 838 .sp
839 839 .LP
840 840 Notice that in some earlier releases, the above scenario did not work
841 841 correctly, and intervention with \fBmt\fR(1) between \fBtar\fR invocations was
842 842 necessary. To emulate the old behavior, use the non-rewind device name
843 843 containing the letter \fBb\fR for BSD behavior. See the \fBClose Operations\fR
844 844 section of the \fBmtio\fR(7I) manual page.
845 845
846 846 .LP
847 847 \fBExample 2 \fRArchiving files from /usr/include and from /etc to default tape
848 848 drive 0
849 849 .sp
850 850 .LP
851 851 To archive files from \fB/usr/include\fR and from \fB/etc\fR to default tape
852 852 drive \fB0\fR:
853 853
854 854 .sp
855 855 .in +2
856 856 .nf
857 857 example% \fBtar c -C /usr include -C /etc .\fR
858 858 .fi
859 859 .in -2
860 860 .sp
861 861
862 862 .sp
863 863 .LP
864 864 The table of contents from the resulting tarfile would produce output like the
865 865 following:
866 866
867 867 .sp
868 868 .in +2
869 869 .nf
870 870 include/
871 871 include/a.out.h
872 872 \fIand all the other files in\fR \fB/usr/include ...\fR
873 873 \&./chown \fIand all the other files in\fR /etc
874 874 .fi
875 875 .in -2
876 876 .sp
877 877
878 878 .sp
879 879 .LP
880 880 To extract all files in the \fBinclude\fR directory:
881 881
882 882 .sp
883 883 .in +2
884 884 .nf
885 885 example% \fBtar xv include
886 886 x include/, 0 bytes, 0 tape blocks \e
887 887 \fIand all files under\fR include ...\fR
888 888 .fi
889 889 .in -2
890 890 .sp
891 891
892 892 .LP
893 893 \fBExample 3 \fRTransferring files across the network
894 894 .sp
895 895 .LP
896 896 The following is an example using \fBtar\fR to transfer files across the
897 897 network. First, here is how to archive files from the local machine
898 898 (\fBexample\fR) to a tape on a remote system (\fBhost\fR):
899 899
900 900 .sp
901 901 .in +2
902 902 .nf
903 903 example% \fBtar cvfb \(mi 20 \fIfiles\fR| \e
904 904 rsh \fIhost\fR dd of=/dev/rmt/0 obs=20b\fR
905 905 \fImessages from\fR tar
906 906 example%
907 907 .fi
908 908 .in -2
909 909 .sp
910 910
911 911 .sp
912 912 .LP
913 913 In the example above, we are \fIcreating\fR a \fItarfile\fR with the \fBc\fR
914 914 key letter, asking for \fIverbose\fR output from \fBtar\fR with the \fBv\fR
915 915 function modifier, specifying the name of the output \fItarfile\fR using the
916 916 \fBf\fR function modifier (the standard output is where the \fItarfile\fR
917 917 appears, as indicated by the `\fB\(mi\fR\&' sign), and specifying the blocksize
918 918 (\fB20\fR) with the \fBb\fR function modifier. If you want to change the
919 919 blocksize, you must change the blocksize arguments both on the \fBtar\fR
920 920 command \fIand\fR on the \fBdd\fR command.
921 921
922 922 .LP
923 923 \fBExample 4 \fRRetrieving files from a tape on the remote system back to the
924 924 local system
925 925 .sp
926 926 .LP
927 927 The following is an example that uses \fBtar\fR to retrieve files from a tape
928 928 on the remote system back to the local system:
929 929
930 930 .sp
931 931 .in +2
932 932 .nf
933 933 example% \fBrsh -n host dd if=/dev/rmt/0 bs=20b | \e
934 934 tar xvBfb \(mi 20 \fIfiles\fR\fR
935 935 \fImessages from\fR tar
936 936 example%
937 937 .fi
938 938 .in -2
939 939 .sp
940 940
941 941 .sp
942 942 .LP
943 943 In the example above, we are \fIextracting\fR from the \fItarfile\fR with the
944 944 \fBx\fR key letter, asking for \fIverbose\fR \fIoutput\fR \fIfrom\fR \fBtar\fR
945 945 with the \fBv\fR function modifier, telling \fBtar\fR it is reading from a pipe
946 946 with the \fBB\fR function modifier, specifying the name of the input
947 947 \fItarfile\fR using the \fBf\fR function modifier (the standard input is where
948 948 the \fItarfile\fR appears, as indicated by the "\fB\(mi\fR" sign), and
949 949 specifying the blocksize (\fB20\fR) with the \fBb\fR function modifier.
950 950
951 951 .LP
952 952 \fBExample 5 \fRCreating an archive of the home directory
953 953 .sp
954 954 .LP
955 955 The following example creates an archive of the home directory on
956 956 \fB/dev/rmt/0\fR with an actual blocking factor of \fB19\fR:
957 957
958 958 .sp
959 959 .in +2
960 960 .nf
961 961 example% \fBtar cvfb /dev/rmt/0 19 $HOME\fR
962 962 .fi
963 963 .in -2
964 964 .sp
965 965
966 966 .sp
967 967 .LP
968 968 To recognize this archive's actual blocking factor without using the \fBb\fR
969 969 function modifier:
970 970
971 971 .sp
972 972 .in +2
973 973 .nf
974 974 example% \fBtar tvf /dev/rmt/0\fR
975 975 tar: blocksize = 19
976 976 \&...
977 977 .fi
978 978 .in -2
979 979 .sp
980 980
981 981 .sp
982 982 .LP
983 983 To recognize this archive's actual blocking factor using a larger nominal
984 984 blocking factor:
985 985
986 986 .sp
987 987 .in +2
988 988 .nf
989 989 example% \fBtar tvf /dev/rmt/0 30\fR
990 990 tar: blocksize = 19
991 991 \&...
992 992 .fi
993 993 .in -2
994 994 .sp
995 995
996 996 .sp
997 997 .LP
998 998 Attempt to recognize this archive's actual blocking factor using a nominal
999 999 blocking factor that is too small:
1000 1000
1001 1001 .sp
1002 1002 .in +2
1003 1003 .nf
1004 1004 example% \fBtar tvf /dev/rmt/0 10\fR
1005 1005 tar: tape read error
1006 1006 .fi
1007 1007 .in -2
1008 1008 .sp
1009 1009
1010 1010 .SH ENVIRONMENT VARIABLES
1011 1011 .sp
1012 1012 .LP
1013 1013 See \fBenviron\fR(5) for descriptions of the following environment variables
1014 1014 that affect the execution of \fBtar\fR: \fBLC_COLLATE\fR, \fBLC_CTYPE\fR,
1015 1015 \fBLC_MESSAGES\fR, \fBLC_TIME\fR, \fBTZ\fR, and \fBNLSPATH\fR.
1016 1016 .sp
1017 1017 .LP
1018 1018 Affirmative responses are processed using the extended regular expression
1019 1019 defined for the \fByesexpr\fR keyword in the \fBLC_MESSAGES\fR category of the
1020 1020 user's locale. The locale specified in the \fBLC_COLLATE\fR category defines
1021 1021 the behavior of ranges, equivalence classes, and multi-character collating
1022 1022 elements used in the expression defined for \fByesexpr\fR. The locale specified
1023 1023 in \fBLC_CTYPE\fR determines the locale for interpretation of sequences of
1024 1024 bytes of text data a characters, the behavior of character classes used in the
1025 1025 expression defined for the \fByesexpr\fR. See \fBlocale\fR(5).
1026 1026 .SH EXIT STATUS
1027 1027 .sp
1028 1028 .LP
1029 1029 The following exit values are returned:
1030 1030 .sp
1031 1031 .ne 2
1032 1032 .na
1033 1033 \fB\fB0\fR\fR
1034 1034 .ad
1035 1035 .sp .6
1036 1036 .RS 4n
1037 1037 Successful completion.
1038 1038 .RE
1039 1039
1040 1040 .sp
1041 1041 .ne 2
1042 1042 .na
1043 1043 \fB\fB>0\fR\fR
1044 1044 .ad
1045 1045 .sp .6
1046 1046 .RS 4n
1047 1047 An error occurred.
1048 1048 .RE
1049 1049
1050 1050 .SH FILES
1051 1051 .sp
1052 1052 .ne 2
1053 1053 .na
1054 1054 \fB\fB/dev/rmt/[0-7][b][n]\fR\fR
1055 1055 .ad
1056 1056 .sp .6
1057 1057 .RS 4n
1058 1058
1059 1059 .RE
1060 1060
1061 1061 .sp
1062 1062 .ne 2
1063 1063 .na
1064 1064 \fB\fB/dev/rmt/[0-7]l[b][n]\fR\fR
1065 1065 .ad
1066 1066 .sp .6
1067 1067 .RS 4n
1068 1068
1069 1069 .RE
1070 1070
1071 1071 .sp
1072 1072 .ne 2
1073 1073 .na
1074 1074 \fB\fB/dev/rmt/[0-7]m[b][n]\fR\fR
1075 1075 .ad
1076 1076 .sp .6
1077 1077 .RS 4n
1078 1078
1079 1079 .RE
1080 1080
1081 1081 .sp
1082 1082 .ne 2
1083 1083 .na
1084 1084 \fB\fB/dev/rmt/[0-7]h[b][n]\fR\fR
1085 1085 .ad
1086 1086 .sp .6
1087 1087 .RS 4n
1088 1088
1089 1089 .RE
1090 1090
1091 1091 .sp
1092 1092 .ne 2
1093 1093 .na
1094 1094 \fB\fB/dev/rmt/[0-7]u[b][n]\fR\fR
1095 1095 .ad
1096 1096 .sp .6
1097 1097 .RS 4n
1098 1098
1099 1099 .RE
1100 1100
1101 1101 .sp
1102 1102 .ne 2
1103 1103 .na
1104 1104 \fB\fB/dev/rmt/[0-7]c[b][n]\fR\fR
1105 1105 .ad
1106 1106 .sp .6
1107 1107 .RS 4n
1108 1108
1109 1109 .RE
1110 1110
1111 1111 .sp
1112 1112 .ne 2
1113 1113 .na
1114 1114 \fB\fB/etc/default/tar\fR\fR
1115 1115 .ad
1116 1116 .sp .6
1117 1117 .RS 4n
1118 1118 Settings might look like this:
1119 1119 .br
1120 1120 .in +2
1121 1121 \fBarchive0=/dev/rmt/0\fR
1122 1122 .in -2
1123 1123 .br
1124 1124 .in +2
1125 1125 \fBarchive1=/dev/rmt/0n\fR
1126 1126 .in -2
1127 1127 .br
1128 1128 .in +2
1129 1129 \fBarchive2=/dev/rmt/1\fR
1130 1130 .in -2
1131 1131 .br
1132 1132 .in +2
1133 1133 \fBarchive3=/dev/rmt/1n\fR
1134 1134 .in -2
1135 1135 .br
1136 1136 .in +2
1137 1137 \fBarchive4=/dev/rmt/0\fR
1138 1138 .in -2
1139 1139 .br
1140 1140 .in +2
1141 1141 \fBarchive5=/dev/rmt/0n\fR
1142 1142 .in -2
1143 1143 .br
1144 1144 .in +2
1145 1145 \fBarchive6=/dev/rmt/1\fR
1146 1146 .in -2
1147 1147 .br
1148 1148 .in +2
1149 1149 \fBarchive7=/dev/rmt/1n\fR
1150 1150 .in -2
1151 1151 .RE
1152 1152
1153 1153 .sp
1154 1154 .ne 2
1155 1155 .na
1156 1156 \fB\fB/tmp/tar*\fR\fR
1157 1157 .ad
1158 1158 .sp .6
1159 1159 .RS 4n
1160 1160
1161 1161 .RE
1162 1162
1163 1163 .SH ATTRIBUTES
1164 1164 .sp
1165 1165 .LP
1166 1166 See \fBattributes\fR(5) for descriptions of the following attributes:
1167 1167 .sp
1168 1168
1169 1169 .sp
1170 1170 .TS
1171 1171 box;
1172 1172 c | c
1173 1173 l | l .
1174 1174 ATTRIBUTE TYPE ATTRIBUTE VALUE
|
↓ open down ↓ |
1174 lines elided |
↑ open up ↑ |
1175 1175 _
1176 1176 CSI Enabled
1177 1177 _
1178 1178 Interface Stability Committed
1179 1179 .TE
1180 1180
1181 1181 .SH SEE ALSO
1182 1182 .sp
1183 1183 .LP
1184 1184 \fBar\fR(1), \fBbasename\fR(1), \fBbzip2\fR(1), \fBcd\fR(1), \fBchown\fR(1),
1185 -\fBcompress\fR)(1), \fBcpio\fR(1), \fBcsh\fR(1), \fBdirname\fR(1),
1185 +\fBcompress\fR)(1), \fBcpio\fR(1), \fBcsh\fR(1), \fBdirname\fR(1),
1186 1186 \fBfind\fR(1), \fBgzip\fR(1), \fBls\fR(1), \fBmt\fR(1), \fBpax\fR(1),
1187 1187 \fBsetfacl\fR(1), \fBumask\fR(1), \fBxz\fR(1), \fBmknod\fR(1M),
1188 1188 \fBarchives.h\fR(3HEAD), \fBattributes\fR(5), \fBenviron\fR(5),
1189 1189 \fBfsattr\fR(5), \fBlargefile\fR(5), \fBmtio\fR(7I)
1190 1190 .SH DIAGNOSTICS
1191 1191 .sp
1192 1192 .LP
1193 1193 Diagnostic messages are output for bad key characters and tape read/write
1194 1194 errors, and for insufficient memory to hold the link tables.
1195 1195 .SH NOTES
1196 1196 .sp
1197 1197 .LP
1198 1198 There is no way to access the \fIn\fR-th occurrence of a file.
1199 1199 .sp
1200 1200 .LP
1201 1201 Tape errors are handled ungracefully.
1202 1202 .sp
1203 1203 .LP
1204 1204 The \fBtar\fR archive format allows \fBUID\fRs and \fBGID\fRs up to
1205 1205 \fB2097151\fR to be stored in the archive header. Files with \fBUID\fRs and
1206 1206 \fBGID\fRs greater than this value is archived with the \fBUID\fR and \fBGID\fR
1207 1207 of \fB60001\fR.
1208 1208 .sp
1209 1209 .LP
1210 1210 If an archive is created that contains files whose names were created by
1211 1211 processes running in multiple locales, a single locale that uses a full 8-bit
1212 1212 codeset (for example, the \fBen_US\fR locale) should be used both to create the
1213 1213 archive and to extract files from the archive.
1214 1214 .sp
1215 1215 .LP
1216 1216 Neither the \fBr\fR function letter nor the \fBu\fR function letter can be used
1217 1217 with quarter-inch archive tapes, since these tape drives cannot backspace.
1218 1218 .sp
1219 1219 .LP
1220 1220 Since \fBtar\fR has no options, the standard "\fB\(mi\(mi\fR" argument that is
1221 1221 normally used in other utilities to terminate recognition of options is not
1222 1222 needed. If used, it is recognized only as the first argument and is ignored.
1223 1223 .sp
1224 1224 .LP
1225 1225 Since \fB\(miC\fR \fIdirectory\fR \fIfile\fR and \fB\(miI\fR \fIinclude-file\fR
1226 1226 are multi-argument operands, any of the following methods can be used to
1227 1227 archive or extract a file named \fB\(miC\fR or \fB\(miI\fR:
1228 1228 .RS +4
1229 1229 .TP
1230 1230 1.
1231 1231 Specify them using file operands containing a \fB/\fR character on the
1232 1232 command line (such as \fB/home/joe/\(miC\fR or \fB\&./\(miI\fR).
1233 1233 .RE
1234 1234 .RS +4
1235 1235 .TP
1236 1236 2.
1237 1237 Include them in an include file with \fB\(miI\fR \fIinclude-file\fR.
1238 1238 .RE
1239 1239 .RS +4
1240 1240 .TP
1241 1241 3.
1242 1242 Specify the directory in which the file resides:
1243 1243 .sp
1244 1244 .in +2
1245 1245 .nf
1246 1246 \fB-C \fIdirectory\fR -C\fR
1247 1247 .fi
1248 1248 .in -2
1249 1249 .sp
1250 1250
1251 1251 or
1252 1252 .sp
1253 1253 .in +2
1254 1254 .nf
1255 1255 \fB-C \fIdirectory\fR -I\fR
1256 1256 .fi
1257 1257 .in -2
1258 1258 .sp
1259 1259
1260 1260 .RE
1261 1261 .RS +4
1262 1262 .TP
1263 1263 4.
1264 1264 Specify the entire directory in which the file resides:
1265 1265 .sp
1266 1266 .in +2
1267 1267 .nf
1268 1268 \fB-C \fIdirectory\fR .\fR
1269 1269 .fi
1270 1270 .in -2
1271 1271 .sp
1272 1272
1273 1273 .RE
|
↓ open down ↓ |
78 lines elided |
↑ open up ↑ |
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX