1 #
2 # CDDL HEADER START
3 #
4 # The contents of this file are subject to the terms of the
5 # Common Development and Distribution License (the "License").
6 # You may not use this file except in compliance with the License.
7 #
8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 # or http://www.opensolaris.org/os/licensing.
10 # See the License for the specific language governing permissions
11 # and limitations under the License.
12 #
13 # When distributing Covered Code, include this CDDL HEADER in each
14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 # If applicable, add the following below this CDDL HEADER, with the
16 # fields enclosed by brackets "[]" replaced with your own identifying
17 # information: Portions Copyright [yyyy] [name of copyright owner]
18 #
19 # CDDL HEADER END
20 #
21
22 #
23 # Copyright (c) 1999, 2010, Oracle and/or its affiliates. All rights reserved.
24 #
25
26 # Configuration variables for the runtime environment of the nightly
27 # build script and other tools for construction and packaging of releases.
28 # This script is sourced by 'nightly' and 'bldenv' to set up the environment
29 # for the build. This example is suitable for building a gate,
30 # which will contain the resulting packages and archives (builds of the gate
31 # are done in children and then the resulting archives, packages, and proto
32 # area are put into the parent for everyone to use). It is based off
33 # the onnv release. It sets NIGHTLY_OPTIONS to make nightly do:
34 # DEBUG and non-DEBUG builds (-D)
35 # creates packages for PIT/RE (-p)
36 # checks for new interfaces in libraries (-A)
37 # runs 'make check' (-C)
38 # runs lint in usr/src (-l plus the LINTDIRS variable)
39 # sends mail on completion (-m and the MAILTO variable)
40 # updates the protolist in the parent for children to compare with (-u)
41 # updates the proto area in the parent when done (-U)
42 # checks for changes in ELF runpaths (-r)
43 # checks for changes in unreferenced files (-f)
44 #
45 NIGHTLY_OPTIONS="-ADClmpuUrf"; export NIGHTLY_OPTIONS
46
47 # This is a variable for the rest of the script - GATE doesn't matter to
48 # nightly itself
49 GATE=onnv-gate; export GATE
50
51 # CODEMGR_WS - where is your workspace at (or what should nightly name it)
52 # there is only one definition here, which assumes all the gate build machines
53 # (sparc and x86) are set up the same. But remember, this is a script, so
54 # you _could_ look at $MACH or `uname -n` and set these variables differently.
55 CODEMGR_WS="/builds/$GATE"; export CODEMGR_WS
56
57 # PARENT_WS is used to determine the parent of this workspace. This is
58 # for the options that deal with the parent workspace (such as where the
59 # proto area will go).
60 #
61 # If you use this, it must be local (or nfs): nightly cannot copy
62 # over ssh or http.
63 PARENT_WS="/ws/$GATE"; export PARENT_WS
64
65 # CLONE_WS is the workspace nightly should do a bringover from.
66 CLONE_WS="ssh://anonhg@onnv.sfbay.sun.com//export/onnv-clone"; export CLONE_WS
67
68 # CLOSED_CLONE_WS is the workspace from which nightly will acquire the
69 # usr/closed tree.
70 CLOSED_CLONE_WS="${CLONE_WS}/usr/closed"
71 export CLOSED_CLONE_WS
72
73 # This flag controls whether to build the closed source. If
74 # undefined, nightly(1) and bldenv(1) will set it according to whether
75 # the closed source tree is present. CLOSED_IS_PRESENT="no" means not
76 # building the closed sources.
77 # CLOSED_IS_PRESENT="yes"; export CLOSED_IS_PRESENT
78
79 # The bringover, if any, is done as STAFFER.
80 # Set STAFFER to your own login as gatekeeper or integration engineer.
81 # The point is to use group "staff" and avoid referencing the parent
82 # workspace as root.
83 # Some scripts optionally send mail messages to MAILTO.
84 #
85 STAFFER=nobody; export STAFFER
86 MAILTO=$STAFFER; export MAILTO
87
88 # The project (see project(4)) under which to run this build. If not
89 # specified, the build is simply run in a new task in the current project.
90 BUILD_PROJECT=; export BUILD_PROJECT
91
92 # You should not need to change the next four lines
93 LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME
94 ATLOG="$CODEMGR_WS/log"; export ATLOG
95 LOGFILE="$ATLOG/nightly.log"; export LOGFILE
96 MACH=`uname -p`; export MACH
97
98 # When the -A flag is specified, and ELF_DATA_BASELINE_DIR is defined,
99 # the ELF interface description file resulting from the build is compared
100 # to that from the specified directory. This ensures that our object
101 # versioning evolves in a backward compatible manner.
102 #
103 # You should not need to change this unless you wish to use locally cached
104 # baseline files. If you use this, it must be local (or nfs): nightly cannot
105 # copy over ssh or http.
106 #
107 ELF_DATA_BASELINE_DIR="/ws/onnv-gate/usr/src/ELF-data-baseline.$MACH"; export ELF_DATA_BASELINE_DIR
108
109 # This is usually just needed if the closed tree is missing, or when
110 # building a project gate with the -O (cap oh) flag.
111 # ON_CRYPTO_BINS="$PARENT_WS/packages/$MACH/on-crypto.$MACH.tar.bz2"
112 # export ON_CRYPTO_BINS
113
114 # REF_PROTO_LIST - for comparing the list of stuff in your proto area
115 # with. Generally this should be left alone, since you want to see differences
116 # between todays build and yesterdays.
117 #
118 REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST
119
120 #
121 # build environment variables, including version info for mcs, motd,
122 # motd, uname and boot messages. Mostly you shouldn't change this except
123 # when the release slips (nah) or when starting a new release.
124 #
125 ROOT="$CODEMGR_WS/proto/root_${MACH}"; export ROOT
126 SRC="$CODEMGR_WS/usr/src"; export SRC
127 VERSION="$GATE"; export VERSION
128
129 #
130 # the RELEASE and RELEASE_DATE variables are set in Makefile.master;
131 # there might be special reasons to override them here, but that
132 # should not be the case in general
133 #
134 # RELEASE="5.10.1"; export RELEASE
135 # RELEASE_DATE="October 2007"; export RELEASE_DATE
136
137 # proto area in parent for optionally depositing a copy of headers and
138 # libraries corresponding to the protolibs target
139 #
140 PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT
141 PARENT_TOOLS_ROOT=$PARENT_WS/usr/src/tools/proto/root_$MACH-nd; export PARENT_TOOLS_ROOT
142
143 #
144 # Package creation variables. You probably shouldn't change these,
145 # either.
146 #
147 # PKGARCHIVE determines where repositories will be created.
148 #
149 # PKGPUBLISHER* control the publisher settings for those repositories.
150 #
151 PKGARCHIVE="${PARENT_WS}/packages/${MACH}/nightly"; export PKGARCHIVE
152 # PKGPUBLISHER_REDIST="on-nightly"; export PKGPUBLISHER_REDIST
153 # PKGPUBLISHER_NONREDIST="on-extra"; export PKGPUBLISHER_NONREDIST
154
155
156 # we want make to do as much as it can, just in case there's more than
157 # one problem. This is especially important with the gate, since multiple
158 # unrelated broken things can be integrated.
159 MAKEFLAGS=k; export MAKEFLAGS
160
161 # Magic variable to prevent the devpro compilers/teamware from sending
162 # mail back to devpro on every use.
163 UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING
164
165 # Build tools - don't set these unless you know what you're doing. These
166 # variables allows you to get the compilers and onbld files locally or
167 # through cachefs. Set BUILD_TOOLS to pull everything from one location.
168 # Alternately, you can set ONBLD_TOOLS to where you keep the contents of
169 # SUNWonbld and SPRO_ROOT to where you keep the compilers.
170 #
171 #BUILD_TOOLS=/opt; export BUILD_TOOLS
172 #ONBLD_TOOLS=/opt/onbld; export ONBLD_TOOLS
173 #SPRO_ROOT=/opt/SUNspro; export SPRO_ROOT
174
175 # This goes along with lint - it is a series of the form "A [y|n]" which
176 # means "go to directory A and run 'make lint'" Then mail me (y) the
177 # difference in the lint output. 'y' should only be used if the area you're
178 # linting is actually lint clean or you'll get lots of mail.
179 # You shouldn't need to change this though.
180 #LINTDIRS="$SRC y"; export LINTDIRS
181
182 #
183 # Reference to IA32 IHV workspace, proto area and packages
184 #
185 #IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS
186 #IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT
187 #IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS
188
189 #
190 # Reference to binary-only IA32 IHV packages
191 #
192 #IA32_IHV_BINARY_PKGS=/ws/${GATE}-ihv-bin
193 #export IA32_IHV_BINARY_PKGS
194
195 # Set this flag to 'n' to disable the automatic validation of the dmake
196 # version in use. The default is to check it.
197 #CHECK_DMAKE=y
198
199 # Set this flag to 'n' to disable the use of 'checkpaths'. The default,
200 # if the 'N' option is not specified, is to run this test.
201 #CHECK_PATHS=y
202
203 # Set this flag to 'y' to enable the use of elfsigncmp to validate the
204 # output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS.
205 # The default is to not verify them.
206 #VERIFY_ELFSIGN=n
207
208 # BRINGOVER_FILES is the list of files nightly passes to bringover.
209 # If not set the default is "usr", but it can be used for bringing
210 # over deleted_files or other nifty directories.
211 #BRINGOVER_FILES="usr deleted_files"
212
213 # POST_NIGHTLY can be any command to be run at the end of nightly. See
214 # nightly(1) for interactions between environment variables and this command.
215 #POST_NIGHTLY=