Print this page
3788 /etc/bootrc is defunct and should be removed
| Split |
Close |
| Expand all |
| Collapse all |
--- old/usr/src/uts/common/conf/param.c
+++ new/usr/src/uts/common/conf/param.c
1 1 /*
2 2 * CDDL HEADER START
3 3 *
4 4 * The contents of this file are subject to the terms of the
5 5 * Common Development and Distribution License (the "License").
6 6 * You may not use this file except in compliance with the License.
7 7 *
8 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 9 * or http://www.opensolaris.org/os/licensing.
10 10 * See the License for the specific language governing permissions
11 11 * and limitations under the License.
12 12 *
13 13 * When distributing Covered Code, include this CDDL HEADER in each
14 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 15 * If applicable, add the following below this CDDL HEADER, with the
16 16 * fields enclosed by brackets "[]" replaced with your own identifying
17 17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 18 *
19 19 * CDDL HEADER END
20 20 */
21 21 /*
22 22 * Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
23 23 * Copyright 2012 Milan Jurik. All rights reserved.
24 24 */
25 25
26 26 #include <sys/types.h>
27 27 #include <sys/time.h>
28 28 #include <sys/param.h>
29 29 #include <sys/systm.h>
30 30 #include <sys/signal.h>
31 31 #include <sys/sysmacros.h>
32 32 #include <sys/cmn_err.h>
33 33 #include <sys/user.h>
34 34 #include <sys/proc.h>
35 35 #include <sys/task.h>
36 36 #include <sys/project.h>
37 37 #include <sys/klwp.h>
38 38 #include <sys/vnode.h>
39 39 #include <sys/file.h>
40 40 #include <sys/fcntl.h>
41 41 #include <sys/flock.h>
42 42 #include <sys/var.h>
43 43 #include <sys/stream.h>
44 44 #include <sys/strsubr.h>
45 45 #include <sys/conf.h>
46 46 #include <sys/class.h>
47 47 #include <sys/ts.h>
48 48 #include <sys/rt.h>
49 49 #include <sys/exec.h>
50 50 #include <sys/exechdr.h>
51 51 #include <sys/buf.h>
52 52 #include <sys/resource.h>
53 53 #include <vm/seg.h>
54 54 #include <vm/pvn.h>
55 55 #include <vm/seg_kmem.h>
56 56 #include <sys/vmparam.h>
57 57 #include <sys/machparam.h>
58 58 #include <sys/utsname.h>
59 59 #include <sys/kmem.h>
60 60 #include <sys/stack.h>
61 61 #include <sys/modctl.h>
62 62 #include <sys/fdbuffer.h>
63 63 #include <sys/cyclic_impl.h>
64 64 #include <sys/disp.h>
65 65 #include <sys/tuneable.h>
66 66 #include <sys/systeminfo.h>
67 67
68 68 #include <sys/vmem.h>
69 69 #include <sys/clock.h>
70 70 #include <sys/clock_impl.h>
71 71 #include <sys/serializer.h>
72 72
73 73 /*
74 74 * The following few lines describe generic things that must be compiled
75 75 * into the booted executable (unix) rather than genunix or any other
76 76 * module because they're required by crash dump readers, etc.
77 77 */
78 78 struct modctl modules; /* head of linked list of modules */
79 79 char *default_path; /* default module loading path */
80 80 struct swapinfo *swapinfo; /* protected by the swapinfo_lock */
81 81 proc_t *practive; /* active process list */
82 82 uint_t nproc; /* current number of processes */
83 83 proc_t p0; /* process 0 */
84 84 struct plock p0lock; /* p0's p_lock */
85 85 klwp_t lwp0; /* t0's lwp */
86 86 task_t *task0p; /* task 0 */
87 87 kproject_t *proj0p; /* location of project 0 */
88 88
89 89 /*
90 90 * The following are "implementation architecture" dependent constants made
91 91 * available here in the form of initialized data for use by "implementation
92 92 * architecture" independent modules. See machparam.h.
93 93 */
94 94 const unsigned long _pagesize = (unsigned long)PAGESIZE;
95 95 const unsigned int _pageshift = (unsigned int)PAGESHIFT;
96 96 const unsigned long _pageoffset = (unsigned long)PAGEOFFSET;
97 97 /*
98 98 * XXX - This value pagemask has to be a 64bit size because
99 99 * large file support uses this mask on offsets which are 64 bit size.
100 100 * using unsigned leaves the higher 32 bits value as zero thus
101 101 * corrupting offset calculations in the file system and VM.
102 102 */
103 103 const u_longlong_t _pagemask = (u_longlong_t)PAGEMASK;
104 104 const unsigned long _mmu_pagesize = (unsigned long)MMU_PAGESIZE;
105 105 const unsigned int _mmu_pageshift = (unsigned int)MMU_PAGESHIFT;
106 106 const unsigned long _mmu_pageoffset = (unsigned long)MMU_PAGEOFFSET;
107 107 const unsigned long _mmu_pagemask = (unsigned long)MMU_PAGEMASK;
108 108 uintptr_t _kernelbase = (uintptr_t)KERNELBASE;
109 109 uintptr_t _userlimit = (uintptr_t)USERLIMIT;
110 110 uintptr_t _userlimit32 = (uintptr_t)USERLIMIT32;
111 111 const uintptr_t _argsbase = (uintptr_t)ARGSBASE;
112 112 const unsigned int _diskrpm = (unsigned int)DISKRPM;
113 113 const unsigned long _pgthresh = (unsigned long)PGTHRESH;
114 114 const unsigned int _maxslp = (unsigned int)MAXSLP;
115 115 const unsigned long _maxhandspreadpages = (unsigned long)MAXHANDSPREADPAGES;
116 116 const int _ncpu = (int)NCPU;
117 117 const int _ncpu_log2 = (int)NCPU_LOG2;
118 118 const int _ncpu_p2 = (int)NCPU_P2;
119 119 const unsigned long _defaultstksz = (unsigned long)DEFAULTSTKSZ;
120 120 const unsigned int _nbpg = (unsigned int)MMU_PAGESIZE;
121 121
122 122 /*
123 123 * System parameter formulae.
124 124 *
125 125 * This file is copied into each directory where we compile
126 126 * the kernel; it should be modified there to suit local taste
127 127 * if necessary.
128 128 */
129 129
130 130 /*
131 131 * Default hz is 100, but if we set hires_tick we get higher resolution
132 132 * clock behavior (currently defined to be 1000 hz). Higher values seem
133 133 * to work, but are not supported.
134 134 *
135 135 * If we do decide to play with higher values, remember that hz should
136 136 * satisfy the following constraints to avoid integer round-off problems:
137 137 *
138 138 * (1) hz should be in the range 100 <= hz <= MICROSEC. If hz exceeds
139 139 * MICROSEC, usec_per_tick will be zero and lots of stuff will break.
140 140 * Similarly, if hz < 100 then hz / 100 == 0 and stuff will break.
141 141 *
142 142 * (2) If hz <= 1000, it should be both a multiple of 100 and a
143 143 * divisor of 1000.
144 144 *
145 145 * (3) If hz > 1000, it should be both a multiple of 1000 and a
146 146 * divisor of MICROSEC.
147 147 *
148 148 * Thus the only reasonable values of hz (i.e. the values that won't
149 149 * cause roundoff error) are: 100, 200, 500, 1000, 2000, 4000, 5000,
150 150 * 8000, 10000, 20000, 25000, 40000, 50000, 100000, 125000, 200000,
151 151 * 250000, 500000, 1000000. As of this writing (1996) a clock rate
152 152 * of more than about 10 kHz seems utterly ridiculous, although
153 153 * this observation will no doubt seem quaintly amusing one day.
154 154 */
155 155 #define HIRES_HZ_DEFAULT 1000
156 156
157 157 int hz = HZ_DEFAULT;
158 158 int hires_hz = HIRES_HZ_DEFAULT;
159 159
160 160 int hires_tick = 0;
161 161 int cpu_decay_factor = 10; /* this is no longer tied to clock */
162 162 int max_hres_adj; /* maximum adjustment of hrtime per tick */
163 163 int tick_per_msec; /* clock ticks per millisecond (zero if hz < 1000) */
164 164
165 165 /*
166 166 * Milliseconds, Microseconds, and Nanoseconds per clock tick
167 167 *
168 168 * Note:
169 169 * msec_per_tick is zero if hz > 1000
170 170 */
171 171 int msec_per_tick;
172 172 int usec_per_tick;
173 173 int nsec_per_tick;
174 174
175 175 /*
176 176 * Time Resolution values. These are defined in condvar.h and initialized in
177 177 * param_init(). Consumers of cv_reltimedwait() and cv_reltimedwait_sig()
178 178 * need to specify how accurate the timeout argument should be through
179 179 * one of these values. The intention is to allow the underlying implementation
180 180 * to anticipate or defer the expiration of timeouts, preventing unnecessary
181 181 * wakeups by batch processing similarly expiring events.
182 182 */
183 183 time_res_t time_res[TR_COUNT];
184 184
185 185 /*
186 186 * Setting "snooping" to a non-zero value will cause a deadman panic if
187 187 * snoop_interval microseconds elapse without lbolt increasing. The default
188 188 * snoop_interval is 50 seconds.
189 189 */
190 190 #define SNOOP_INTERVAL_MIN (MICROSEC)
191 191 #define SNOOP_INTERVAL_DEFAULT (50 * MICROSEC)
192 192
193 193 int snooping = 0;
194 194 uint_t snoop_interval = SNOOP_INTERVAL_DEFAULT;
195 195
196 196 /*
197 197 * Tables of initialization functions, called from main().
198 198 */
199 199
200 200 extern void system_taskq_init(void);
201 201 extern void binit(void);
202 202 extern void space_init(void);
203 203 extern void dnlc_init(void);
204 204 extern void vfsinit(void);
205 205 extern void finit(void);
206 206 extern void strinit(void);
207 207 extern void flk_init(void);
208 208 extern void ftrace_init(void);
209 209 extern void softcall_init(void);
210 210 extern void ttyinit(void);
211 211 extern void schedctl_init(void);
212 212 extern void deadman_init(void);
213 213 extern void clock_timer_init(void);
214 214 extern void clock_realtime_init(void);
215 215 extern void clock_highres_init(void);
216 216 extern void clock_tick_mp_init(void);
217 217 extern void cu_init(void);
218 218 extern void callout_mp_init(void);
219 219 extern void cpu_seq_tbl_init(void);
220 220
221 221 void (*init_tbl[])(void) = {
222 222 system_taskq_init,
223 223 binit,
224 224 space_init,
225 225 dnlc_init,
226 226 vfsinit,
227 227 finit,
228 228 strinit,
229 229 serializer_init,
230 230 softcall_init,
231 231 ttyinit,
232 232 as_init,
233 233 pvn_init,
234 234 anon_init,
235 235 segvn_init,
236 236 flk_init,
237 237 cpu_seq_tbl_init,
238 238 schedctl_init,
239 239 fdb_init,
240 240 deadman_init,
241 241 clock_timer_init,
242 242 clock_realtime_init,
243 243 clock_highres_init,
244 244 0
245 245 };
246 246
247 247
248 248 #if defined(__sparc)
249 249 extern void siron_mp_init();
250 250 #endif
251 251
252 252 /*
253 253 * Any per cpu resources should be initialized via
254 254 * an entry in mp_init_tbl().
255 255 */
256 256 void (*mp_init_tbl[])(void) = {
257 257 ftrace_init,
258 258 cyclic_mp_init,
259 259 #if defined(__sparc)
260 260 siron_mp_init,
261 261 #endif
262 262 clock_tick_mp_init,
263 263 cu_init,
264 264 callout_mp_init,
265 265 0
266 266 };
267 267
268 268 int maxusers; /* kitchen-sink knob for dynamic configuration */
269 269
270 270 /*
271 271 * pidmax -- highest pid value assigned by the system
272 272 * Settable in /etc/system
273 273 */
274 274 int pidmax = DEFAULT_MAXPID;
275 275
276 276 /*
277 277 * jump_pid - if set, this value is where pid numbers should start
278 278 * after the first few system pids (0-3) are used. If 0, pids are
279 279 * chosen in the usual way. This variable can be used to quickly
280 280 * create large pids (by setting it to 100000, for example). pids
281 281 * less than this value will never be chosen.
282 282 */
283 283 pid_t jump_pid = DEFAULT_JUMPPID;
284 284
285 285 /*
286 286 * autoup -- used in struct var for dynamic config of the age a delayed-write
287 287 * buffer must be in seconds before bdflush will write it out.
288 288 */
289 289 #define DEFAULT_AUTOUP 30
290 290 int autoup = DEFAULT_AUTOUP;
291 291
292 292 /*
293 293 * bufhwm -- tuneable variable for struct var for v_bufhwm.
294 294 * high water mark for buffer cache mem usage in units of K bytes.
295 295 *
296 296 * bufhwm_pct -- ditto, but given in % of physmem.
297 297 */
298 298 int bufhwm = 0;
299 299 int bufhwm_pct = 0;
300 300
301 301 /*
302 302 * Process table.
303 303 */
304 304 int maxpid;
305 305 int max_nprocs; /* set in param_init() */
306 306 int maxuprc; /* set in param_init() */
307 307 int reserved_procs;
308 308 int nthread = 1;
309 309
310 310 /*
311 311 * UFS tunables
312 312 */
313 313 int ufs_ninode; /* declared here due to backwards compatibility */
314 314 int ndquot; /* declared here due to backwards compatibility */
315 315
316 316 /*
317 317 * Exec switch table. This is used by the generic exec module
318 318 * to switch out to the desired executable type, based on the
319 319 * magic number. The currently supported types are ELF, a.out
320 320 * (both NMAGIC and ZMAGIC), interpreter (#!) files,
321 321 * and Java executables.
322 322 */
323 323 /*
324 324 * Magic numbers
325 325 */
326 326 short elfmagic = 0x7f45;
327 327 short intpmagic = 0x2321;
328 328 short jmagic = 0x504b;
329 329
330 330 #if defined(__sparc)
331 331 short aout_nmagic = NMAGIC;
332 332 short aout_zmagic = ZMAGIC;
333 333 short aout_omagic = OMAGIC;
334 334 #endif
335 335 short nomagic = 0;
336 336
337 337 /*
338 338 * Magic strings
339 339 */
340 340 #define ELF32MAGIC_STRING "\x7f""ELF\x1"
341 341 #define ELF64MAGIC_STRING "\x7f""ELF\x2"
342 342 #define INTPMAGIC_STRING "#!"
343 343 #define JAVAMAGIC_STRING "PK\003\004"
344 344 #define AOUT_OMAGIC_STRING "\x1""\x07" /* 0407 */
345 345 #define AOUT_NMAGIC_STRING "\x1""\x08" /* 0410 */
346 346 #define AOUT_ZMAGIC_STRING "\x1""\x0b" /* 0413 */
347 347 #define NOMAGIC_STRING ""
348 348
349 349 #define SHBIN_CNTL(x) ((x)&037)
350 350 #define SHBINMAGIC_STRING {SHBIN_CNTL('k'), SHBIN_CNTL('s'), SHBIN_CNTL('h'), 0}
351 351 #define SHBINMAGIC_LEN 4
352 352
353 353 char elf32magicstr[] = ELF32MAGIC_STRING;
354 354 char elf64magicstr[] = ELF64MAGIC_STRING;
355 355 char intpmagicstr[] = INTPMAGIC_STRING;
356 356 char shbinmagicstr[] = SHBINMAGIC_STRING;
357 357 char javamagicstr[] = JAVAMAGIC_STRING;
358 358 #if defined(__sparc)
359 359 char aout_nmagicstr[] = AOUT_NMAGIC_STRING;
360 360 char aout_zmagicstr[] = AOUT_ZMAGIC_STRING;
361 361 char aout_omagicstr[] = AOUT_OMAGIC_STRING;
362 362 #endif
363 363 char nomagicstr[] = NOMAGIC_STRING;
364 364
365 365 char *execswnames[] = {
366 366 "elfexec", /* Elf32 */
367 367 #ifdef _LP64
368 368 "elfexec", /* Elf64 */
369 369 #endif
370 370 "intpexec",
371 371 "shbinexec",
372 372 "javaexec",
373 373 #if defined(__sparc)
374 374 "aoutexec",
375 375 "aoutexec",
376 376 "aoutexec",
377 377 #endif
378 378 NULL,
379 379 NULL,
380 380 NULL
381 381 };
382 382
383 383 struct execsw execsw[] = {
384 384 { elf32magicstr, 0, 5, NULL, NULL, NULL },
385 385 #ifdef _LP64
386 386 { elf64magicstr, 0, 5, NULL, NULL, NULL },
387 387 #endif
388 388 { intpmagicstr, 0, 2, NULL, NULL, NULL },
389 389 { shbinmagicstr, 0, SHBINMAGIC_LEN, NULL, NULL, NULL },
390 390 { javamagicstr, 0, 4, NULL, NULL, NULL },
391 391 #if defined(__sparc)
392 392 { aout_zmagicstr, 2, 2, NULL, NULL, NULL },
393 393 { aout_nmagicstr, 2, 2, NULL, NULL, NULL },
394 394 { aout_omagicstr, 2, 2, NULL, NULL, NULL },
395 395 #endif
396 396 { nomagicstr, 0, 0, NULL, NULL, NULL },
397 397 { nomagicstr, 0, 0, NULL, NULL, NULL },
398 398 { nomagicstr, 0, 0, NULL, NULL, NULL },
399 399 { nomagicstr, 0, 0, NULL, NULL, NULL }
400 400 };
401 401 int nexectype = sizeof (execsw) / sizeof (execsw[0]); /* # of exec types */
402 402 kmutex_t execsw_lock; /* Used for allocation of execsw entries */
403 403
404 404 /*
405 405 * symbols added to make changing max-file-descriptors
406 406 * simple via /etc/system
407 407 */
408 408 #define RLIM_FD_CUR 0x100
409 409 #define RLIM_FD_MAX 0x10000
410 410
411 411 uint_t rlim_fd_cur = RLIM_FD_CUR;
412 412 uint_t rlim_fd_max = RLIM_FD_MAX;
413 413
414 414 /*
415 415 * (Default resource limits were formerly declared here, but are now provided by
416 416 * the more general resource controls framework.)
417 417 */
418 418
419 419 /*
420 420 * STREAMS tunables
421 421 */
422 422 int nstrpush = 9; /* maximum # of modules/drivers on a stream */
423 423 ssize_t strctlsz = 1024; /* maximum size of user-generated M_PROTO */
424 424 ssize_t strmsgsz = 0x10000; /* maximum size of user-generated M_DATA */
425 425 /* for `strmsgsz', zero means unlimited */
426 426 /*
427 427 * Filesystem tunables
428 428 */
429 429 int rstchown = 1; /* POSIX_CHOWN_RESTRICTED is enabled */
430 430 int ngroups_max = NGROUPS_MAX_DEFAULT;
431 431
432 432 /*
433 433 * generic scheduling stuff
434 434 *
435 435 * Configurable parameters for RT and TS are in the respective
436 436 * scheduling class modules.
437 437 */
438 438
439 439 pri_t maxclsyspri = MAXCLSYSPRI;
440 440 pri_t minclsyspri = MINCLSYSPRI;
441 441 char sys_name[] = "SYS";
442 442
443 443 extern pri_t sys_init(id_t, int, classfuncs_t **);
444 444 extern classfuncs_t sys_classfuncs;
445 445
446 446 sclass_t sclass[] = {
447 447 { "SYS", sys_init, &sys_classfuncs, STATIC_SCHED, 0 },
448 448 { "", NULL, NULL, NULL, 0 },
449 449 { "", NULL, NULL, NULL, 0 },
450 450 { "", NULL, NULL, NULL, 0 },
451 451 { "", NULL, NULL, NULL, 0 },
452 452 { "", NULL, NULL, NULL, 0 },
453 453 { "", NULL, NULL, NULL, 0 },
454 454 { "", NULL, NULL, NULL, 0 },
455 455 { "", NULL, NULL, NULL, 0 },
456 456 { "", NULL, NULL, NULL, 0 }
457 457 };
458 458
459 459 int loaded_classes = 1; /* for loaded classes */
460 460 kmutex_t class_lock; /* lock for class[] */
461 461
462 462 int nclass = sizeof (sclass) / sizeof (sclass_t);
463 463 char initcls[] = "TS";
464 464 char *defaultclass = initcls;
465 465
466 466 /*
467 467 * Tunable system parameters.
468 468 */
469 469
470 470 /*
471 471 * The integers tune_* are done this way so that the tune
472 472 * data structure may be "tuned" if necessary from the /etc/system
473 473 * file. The tune data structure is initialized in param_init();
474 474 */
475 475
476 476 tune_t tune;
477 477
478 478 /*
479 479 * If freemem < t_getpgslow, then start to steal pages from processes.
480 480 */
481 481 int tune_t_gpgslo = 25;
482 482
483 483 /*
484 484 * Rate at which fsflush is run, in seconds.
485 485 */
486 486 #define DEFAULT_TUNE_T_FSFLUSHR 1
487 487 int tune_t_fsflushr = DEFAULT_TUNE_T_FSFLUSHR;
488 488
489 489 /*
490 490 * The minimum available resident (not swappable) memory to maintain
491 491 * in order to avoid deadlock. In pages.
492 492 */
493 493 int tune_t_minarmem = 25;
494 494
495 495 /*
496 496 * The minimum available swappable memory to maintain in order to avoid
497 497 * deadlock. In pages.
498 498 */
499 499 int tune_t_minasmem = 25;
500 500
501 501 int tune_t_flckrec = 512; /* max # of active frlocks */
502 502
503 503 /*
504 504 * Number of currently available pages that cannot be 'locked'
505 505 * This is set in init_pages_pp_maximum, and must be initialized
506 506 * to zero here to detect an override in /etc/system
507 507 */
508 508 pgcnt_t pages_pp_maximum = 0;
509 509
510 510 int boothowto; /* boot flags passed to kernel */
511 511 struct var v; /* System Configuration Information */
512 512
513 513 /*
514 514 * System Configuration Information
515 515 */
516 516
517 517 /*
518 518 * The physical system's host identifier, expressed as a decimal string.
519 519 * Code should only directly access this value when writing to it (setting the
520 520 * physical system's host identifier). Code that reads the physical system's
521 521 * host identifier should use zone_get_hostid(NULL) instead.
522 522 */
523 523 char hw_serial[HW_HOSTID_LEN] = "0";
524 524
525 525 #if defined(__sparc)
526 526
|
↓ open down ↓ |
526 lines elided |
↑ open up ↑ |
527 527 /*
528 528 * On sparc machines, read hw_serial from the firmware at boot time
529 529 * and simply assert Oracle is the hardware provider.
530 530 */
531 531 char architecture[] = "sparcv9";
532 532 char architecture_32[] = "sparc";
533 533 char hw_provider[] = "Oracle Corporation";
534 534
535 535 #elif defined(__i386)
536 536
537 -/*
538 - * On x86 machines, read hw_serial, hw_provider and srpc_domain from
539 - * /etc/bootrc at boot time.
540 - */
541 537 char architecture[] = "i386";
542 538 char architecture_32[] = "i386";
543 539 char hw_provider[SYS_NMLN] = "";
544 540
545 541 #elif defined(__amd64)
546 542
547 -/*
548 - * On amd64 machines, read hw_serial, hw_provider and srpc_domain from
549 - * /etc/bootrc at boot time.
550 - */
551 543 char architecture[] = "amd64";
552 544 char architecture_32[] = "i386";
553 545 char hw_provider[SYS_NMLN] = "";
554 546
555 547 #else
556 548 #error "unknown processor architecture"
557 549 #endif
558 550
559 551 char srpc_domain[SYS_NMLN] = "";
560 552 char platform[SYS_NMLN] = ""; /* read from the devinfo root node */
561 553
562 554 /* Initialize isa_list */
563 555 char *isa_list = architecture;
564 556
565 557 static pgcnt_t original_physmem = 0;
566 558
567 559 #define MIN_DEFAULT_MAXUSERS 8u
568 560 #define MAX_DEFAULT_MAXUSERS 2048u
569 561 #define MAX_MAXUSERS 4096u
570 562
571 563 void
572 564 param_preset(void)
573 565 {
574 566 original_physmem = physmem;
575 567 }
576 568
577 569 void
578 570 param_calc(int platform_max_nprocs)
579 571 {
580 572 /*
581 573 * Default to about one "user" per megabyte, taking into
582 574 * account both physical and virtual constraints.
583 575 * Note: 2^20 is a meg; shifting right by (20 - PAGESHIFT)
584 576 * converts pages to megs without integer overflow.
585 577 */
586 578 #if defined(__sparc)
587 579 if (physmem > original_physmem) {
588 580 physmem = original_physmem;
589 581 cmn_err(CE_NOTE, "physmem limited to %ld", physmem);
590 582 }
591 583 #endif
592 584 if (maxusers == 0) {
593 585 pgcnt_t physmegs = physmem >> (20 - PAGESHIFT);
594 586 pgcnt_t virtmegs = vmem_size(heap_arena, VMEM_FREE) >> 20;
595 587 maxusers = MIN(MAX(MIN(physmegs, virtmegs),
596 588 MIN_DEFAULT_MAXUSERS), MAX_DEFAULT_MAXUSERS);
597 589 }
598 590 if (maxusers > MAX_MAXUSERS) {
599 591 maxusers = MAX_MAXUSERS;
600 592 cmn_err(CE_NOTE, "maxusers limited to %d", MAX_MAXUSERS);
601 593 }
602 594
603 595 if (ngroups_max > NGROUPS_MAX_DEFAULT)
604 596 cmn_err(CE_WARN, "ngroups_max of %d > %d, NFS AUTH_SYS will"
605 597 " not work properly", ngroups_max, NGROUPS_MAX_DEFAULT);
606 598
607 599 #ifdef DEBUG
608 600 /*
609 601 * The purpose of maxusers is to prevent memory overcommit.
610 602 * DEBUG kernels take more space, so reduce maxusers a bit.
611 603 */
612 604 maxusers = (3 * maxusers) / 4;
613 605 #endif
614 606
615 607 /*
616 608 * We need to dynamically change any variables now so that
617 609 * the setting of maxusers and pidmax propagate to the other
618 610 * variables that are dependent on them.
619 611 */
620 612 if (reserved_procs == 0)
621 613 reserved_procs = 5;
622 614 if (pidmax < reserved_procs || pidmax > MAX_MAXPID)
623 615 maxpid = MAX_MAXPID;
624 616 else
625 617 maxpid = pidmax;
626 618
627 619 /*
628 620 * This allows platform-dependent code to constrain the maximum
629 621 * number of processes allowed in case there are e.g. VM limitations
630 622 * with how many contexts are available.
631 623 */
632 624 if (max_nprocs == 0)
633 625 max_nprocs = (10 + 16 * maxusers);
634 626 if (platform_max_nprocs > 0 && max_nprocs > platform_max_nprocs)
635 627 max_nprocs = platform_max_nprocs;
636 628 if (max_nprocs > maxpid)
637 629 max_nprocs = maxpid;
638 630
639 631 if (maxuprc == 0)
640 632 maxuprc = (max_nprocs - reserved_procs);
641 633 }
642 634
643 635 void
644 636 param_init(void)
645 637 {
646 638 /*
647 639 * Set each individual element of struct var v to be the
648 640 * default value. This is done this way
649 641 * so that a user can set the assigned integer value in the
650 642 * /etc/system file *IF* tuning is needed.
651 643 */
652 644 v.v_proc = max_nprocs; /* v_proc - max # of processes system wide */
653 645 v.v_maxupttl = max_nprocs - reserved_procs;
654 646 v.v_maxsyspri = (int)maxclsyspri; /* max global pri for sysclass */
655 647 v.v_maxup = MIN(maxuprc, v.v_maxupttl); /* max procs per user */
656 648 v.v_autoup = autoup; /* v_autoup - delay for delayed writes */
657 649
658 650 /*
659 651 * Set each individual element of struct tune to be the
660 652 * default value. Each struct element This is done this way
661 653 * so that a user can set the assigned integer value in the
662 654 * /etc/system file *IF* tuning is needed.
663 655 */
664 656 tune.t_gpgslo = tune_t_gpgslo;
665 657 tune.t_fsflushr = tune_t_fsflushr;
666 658 tune.t_minarmem = tune_t_minarmem;
667 659 tune.t_minasmem = tune_t_minasmem;
668 660 tune.t_flckrec = tune_t_flckrec;
669 661
670 662 /*
671 663 * Initialization for file descriptors to correct mistaken settings in
672 664 * /etc/system. Initialization of limits performed by resource control
673 665 * system.
674 666 */
675 667 if (rlim_fd_cur > rlim_fd_max)
676 668 rlim_fd_cur = rlim_fd_max;
677 669
678 670 /*
679 671 * calculations needed if hz was set in /etc/system
680 672 */
681 673 if (hires_tick)
682 674 hz = hires_hz;
683 675
684 676 tick_per_msec = hz / MILLISEC;
685 677 msec_per_tick = MILLISEC / hz;
686 678 usec_per_tick = MICROSEC / hz;
687 679 nsec_per_tick = NANOSEC / hz;
688 680 max_hres_adj = nsec_per_tick >> ADJ_SHIFT;
689 681
690 682 /*
691 683 * Consumers of relative timedwait functions must specify how accurately
692 684 * the given timeout must expire. This is currently TR_CLOCK_TICK for
693 685 * the vast majority of consumers, but nsec_per_tick becomes an
694 686 * artificial value in a tickless world. Each caller of such routines
695 687 * should re-evaluate their usage and specify the appropriate
696 688 * resolution.
697 689 */
698 690 time_res[TR_NANOSEC] = NANOSEC / NANOSEC;
699 691 time_res[TR_MICROSEC] = NANOSEC / MICROSEC;
700 692 time_res[TR_MILLISEC] = NANOSEC / MILLISEC;
701 693 time_res[TR_SEC] = NANOSEC / SEC;
702 694 time_res[TR_CLOCK_TICK] = nsec_per_tick;
703 695 }
704 696
705 697 /*
706 698 * Validate tuneable parameters following /etc/system processing,
707 699 * but prior to param_init().
708 700 */
709 701 void
710 702 param_check(void)
711 703 {
712 704 #if defined(__x86)
713 705 if (physmem != original_physmem) {
714 706 cmn_err(CE_NOTE, "physmem cannot be modified to 0x%lx"
715 707 " via /etc/system. Please use eeprom(1M) instead.",
716 708 physmem);
717 709 physmem = original_physmem;
718 710 }
719 711 #endif
720 712 if (ngroups_max < NGROUPS_UMIN)
721 713 ngroups_max = NGROUPS_UMIN;
722 714 if (ngroups_max > NGROUPS_UMAX)
723 715 ngroups_max = NGROUPS_UMAX;
724 716
725 717 /* If we have many groups then the ucred proto message also grows. */
726 718 if (ngroups_max > NGROUPS_OLDMAX &&
727 719 strctlsz < (ngroups_max - NGROUPS_OLDMAX) * sizeof (gid_t) + 1024) {
728 720 strctlsz = (ngroups_max - NGROUPS_OLDMAX) * sizeof (gid_t) +
729 721 1024;
730 722 }
731 723
732 724 if (autoup <= 0) {
733 725 autoup = DEFAULT_AUTOUP;
734 726 cmn_err(CE_WARN, "autoup <= 0; defaulting to %d", autoup);
735 727 }
736 728
737 729 if (tune_t_fsflushr <= 0) {
738 730 tune_t_fsflushr = DEFAULT_TUNE_T_FSFLUSHR;
739 731 cmn_err(CE_WARN, "tune_t_fsflushr <= 0; defaulting to %d",
740 732 tune_t_fsflushr);
741 733 }
742 734
743 735 if (jump_pid < 0 || jump_pid >= pidmax) {
744 736 jump_pid = 0;
745 737 cmn_err(CE_WARN, "jump_pid < 0 or >= pidmax; ignored");
746 738 }
747 739
748 740 if (snoop_interval < SNOOP_INTERVAL_MIN) {
749 741 snoop_interval = SNOOP_INTERVAL_DEFAULT;
750 742 cmn_err(CE_WARN, "snoop_interval < minimum (%d); defaulting"
751 743 " to %d", SNOOP_INTERVAL_MIN, SNOOP_INTERVAL_DEFAULT);
752 744 }
753 745 }
|
↓ open down ↓ |
193 lines elided |
↑ open up ↑ |
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX