1 IXGBE(7D) Devices IXGBE(7D) 2 3 4 5 NAME 6 ixgbe - Intel 10Gb PCI Express NIC Driver 7 8 SYNOPSIS 9 /dev/ixgbe* 10 11 12 DESCRIPTION 13 The ixgbe 10 Gigabit Ethernet driver is a multi-threaded, loadable, 14 clonable, GLD-based STREAMS driver supporting the Data Link Provider 15 Interface, dlpi(7P), on Intel 10-Gigabit PCI Express Ethernet 16 controllers. 17 18 19 The ixgbe driver functions include controller initialization, frame 20 transmit and receive, promiscuous and multicast support, and error 21 recovery and reporting. 22 23 24 The ixgbe driver supports the following Intel 10-Gigabit PCI Express 25 Ethernet controllers: 26 27 o Intel Ethernet Controller 82598EB Family 28 29 o Intel Ethernet Controller 82599EB (X520) Family 30 31 o Intel Ethernet Controller X540 Family 32 33 o Intel Ethernet Controller X550 Family 34 35 The ixgbe driver and hardware support auto-negotiation, a protocol 36 specified by the IEEE 802.3ae specification. 37 38 APPLICATION PROGRAMMING INTERFACE 39 The cloning character-special device, /dev/ixgbe, is used to access all 40 Intel 10-Gigabit PCI Express Ethernet devices installed within the 41 system. 42 43 44 The ixgbe driver is managed by the dladm(1M) command line utility, 45 which allows VLANs to be defined on top of ixgbe instances and for 46 ixgbe instances to be aggregated. See dladm(1M) for more details. 47 48 49 You must send an explicit DL_ATTACH_REQ message to associate the opened 50 stream with a particular device (PPA). The PPA ID is interpreted as an 51 unsigned integer data type and indicates the corresponding device 52 instance (unit) number. The driver returns an error (DL_ERROR_ACK) if 53 the PPA field value does not correspond to a valid device instance 54 number for the system. The device is initialized on first attach and 55 de-initialized (stopped) at last detach. 56 57 58 The values returned by the driver in the DL_INFO_ACK primitive in 59 response to your DL_INFO_REQ are: 60 61 o Maximum SDU is 16366. 62 63 o Minimum SDU is 0. 64 65 o DLSAP address length is 8. 66 67 o MAC type is DL_ETHER. 68 69 o SAP (Service Access Point) length value is -2, meaning the 70 physical address component is followed immediately by a 71 2-byte SAP component within the DLSAP address. 72 73 o Broadcast address value is the Ethernet/IEEE broadcast 74 address (FF:FF:FF:FF:FF:FF). 75 76 Once in the DL_ATTACHED state, you must send a DL_BIND_REQ 77 to associate a particular SAP with the stream. 78 79 CONFIGURATION 80 By default, the ixgbe driver performs auto-negotiation to select the 81 link speed and mode. Link speed and mode can only be 10000 Mbps full- 82 duplex for fiber, and only 10000, 1000, or 100 Mbps full-duplex for 83 copper. See the IEEE802.3 standard for more information. 84 85 FILES 86 /dev/ixgbe* 87 Special character device. 88 89 90 /kernel/drv/ixgbe 91 32-bit device driver (x86). 92 93 94 /kernel/drv/amd64/ixgbe 95 64-bit device driver (x86). 96 97 98 /kernel/drv/sparcv9/ixgbe 99 64-bit device driver (SPARC). 100 101 102 /kernel/drv/ixgbe.conf 103 Configuration file. 104 105 106 ATTRIBUTES 107 See attributes(5) for descriptions of the following attributes: 108 109 110 111 112 +--------------------+-----------------+ 113 | ATTRIBUTE TYPE | ATTRIBUTE VALUE | 114 +--------------------+-----------------+ 115 |Architecture | SPARC, x86 | 116 +--------------------+-----------------+ 117 |Interface Stability | Committed | 118 +--------------------+-----------------+ 119 120 SEE ALSO 121 dladm(1M), netstat(1M), driver.conf(4), attributes(5), streamio(7I), 122 dlpi(7P) 123 124 125 Writing Device Drivers 126 127 128 STREAMS Programming Guide 129 130 131 Network Interfaces Programmer's Guide 132 133 134 IEEE 802.3ae Specificiation, IEEE - 2002 135 136 137 138 January 13, 2016 IXGBE(7D)