1 '\" te 2 .\" Copyright 1989 AT&T 3 .\" Portions Copyright (c) 1992, X/Open Company Limited All Rights Reserved 4 .\" Copyright (c) 2009, Sun Microsystems, Inc. All Rights Reserved 5 .\" Sun Microsystems, Inc. gratefully acknowledges The Open Group for permission to reproduce portions of its copyrighted documentation. Original documentation from The Open Group can be obtained online at http://www.opengroup.org/bookstore/. 6 .\" The Institute of Electrical and Electronics Engineers and The Open Group, have given us permission to reprint portions of their documentation. In the following statement, the phrase "this text" refers to portions of the system documentation. Portions of this text 7 .\" are reprinted and reproduced in electronic form in the Sun OS Reference Manual, from IEEE Std 1003.1, 2004 Edition, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2004 by the Institute of Electrical 8 .\" and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between these versions and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html. 9 .\" This notice shall appear on any product containing this material. 10 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. 11 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with 12 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] 13 .TH AR 1 "Sep 10, 2013" 14 .SH NAME 15 ar \- maintain portable archive or library 16 .SH SYNOPSIS 17 .LP 18 .nf 19 \fB/usr/bin/ar\fR \fB-d\fR [\fB-Vv\fR] \fIarchive\fR \fIfile\fR... 20 .fi 21 22 .LP 23 .nf 24 \fB/usr/bin/ar\fR \fB-m\fR [\fB-abiVv\fR] [\fIposname\fR] \fIarchive\fR \fIfile\fR... 25 .fi 26 27 .LP 28 .nf 29 \fB/usr/bin/ar\fR \fB-p\fR [\fB-sVv\fR] \fIarchive\fR [\fIfile\fR]... 30 .fi 31 32 .LP 33 .nf 34 \fB/usr/bin/ar\fR \fB-q\fR [\fB-cVv\fR] \fIarchive\fR \fIfile\fR... 35 .fi 36 37 .LP 38 .nf 39 \fB/usr/bin/ar\fR \fB-r\fR [\fB-abciuVv\fR] [\fIposname\fR] \fIarchive\fR \fIfile\fR... 40 .fi 41 42 .LP 43 .nf 44 \fB/usr/bin/ar\fR \fB-t\fR [\fB-sVv\fR] \fIarchive\fR [\fIfile\fR]... 45 .fi 46 47 .LP 48 .nf 49 \fB/usr/bin/ar\fR \fB-x\fR [\fB-CsTVv\fR] \fIarchive\fR [\fIfile\fR]... 50 .fi 51 52 .LP 53 .nf 54 \fB/usr/xpg4/bin/ar\fR \fB-d\fR [\fB-Vv\fR] \fIarchive\fR \fIfile\fR... 55 .fi 56 57 .LP 58 .nf 59 \fB/usr/xpg4/bin/ar\fR \fB-m\fR [\fB-abiVv\fR] [\fIposname\fR] \fIarchive\fR \fIfile\fR... 60 .fi 61 62 .LP 63 .nf 64 \fB/usr/xpg4/bin/ar\fR \fB-p\fR [\fB-sVv\fR] \fIarchive\fR [\fIfile\fR]... 65 .fi 66 67 .LP 68 .nf 69 \fB/usr/xpg4/bin/ar\fR \fB-q\fR [\fB-cVv\fR] \fIarchive\fR \fIfile\fR... 70 .fi 71 72 .LP 73 .nf 74 \fB/usr/xpg4/bin/ar\fR \fB-r\fR [\fB-abciuVv\fR] [\fIposname\fR] \fIarchive\fR \fIfile\fR... 75 .fi 76 77 .LP 78 .nf 79 \fB/usr/xpg4/bin/ar\fR \fB-t\fR [\fB-sVv\fR] \fIarchive\fR [\fIfile\fR]... 80 .fi 81 82 .LP 83 .nf 84 \fB/usr/xpg4/bin/ar\fR \fB-x\fR [\fB-CsTVv\fR] \fIarchive\fR [\fIfile\fR]... 85 .fi 86 87 .SH DESCRIPTION 88 .sp 89 .LP 90 The \fBar\fR utility maintains groups of files combined into a single archive 91 file. Its main use is to create and update library files. However, it can be 92 used for any similar purpose. The magic string and the file headers used by 93 \fBar\fR consist of printable \fBASCII\fR characters. If an archive is composed 94 of printable files, the entire archive is printable. 95 .sp 96 .LP 97 When \fBar\fR creates an archive, it creates headers in a format that is 98 portable across all machines. The portable archive format and structure are 99 described in detail in \fBar.h\fR(3HEAD). The archive symbol table described 100 there is used by the link editor \fBld\fR(1) to effect multiple passes over 101 libraries of object files in an efficient manner. An archive symbol table is 102 only created and maintained by \fBar\fR when there is at least one object file 103 in the archive. The archive symbol table is in a specially named file that is 104 always the first file in the archive. This file is never mentioned or 105 accessible to the user. Whenever the \fBar\fR command is used to create or 106 update the contents of such an archive, the symbol table is rebuilt. The 107 \fB-s\fR option described below forces the symbol table to be rebuilt. 108 .SH OPTIONS 109 .sp 110 .LP 111 The following options are supported: 112 .sp 113 .ne 2 114 .na 115 \fB\fB-a\fR\fR 116 .ad 117 .RS 6n 118 Positions new \fIfile\fRs in \fIarchive\fR after the file named by the 119 \fIposname\fR operand. 120 .RE 121 122 .sp 123 .ne 2 124 .na 125 \fB\fB-b\fR\fR 126 .ad 127 .RS 6n 128 Positions new \fIfile\fRs in \fIarchive\fR before the file named by the 129 \fIposname\fR operand. 130 .RE 131 132 .sp 133 .ne 2 134 .na 135 \fB\fB-c\fR\fR 136 .ad 137 .RS 6n 138 Suppresses the diagnostic message that is written to standard error by default 139 when \fIarchive\fR is created. 140 .RE 141 142 .sp 143 .ne 2 144 .na 145 \fB\fB-C\fR\fR 146 .ad 147 .RS 6n 148 Prevents extracted files from replacing like-named files in the file system. 149 This option is useful when \fB-T\fR is also used to prevent truncated file 150 names from replacing files with the same prefix. 151 .RE 152 153 .sp 154 .ne 2 155 .na 156 \fB\fB-d\fR\fR 157 .ad 158 .RS 6n 159 Deletes one or more \fIfile\fRs from \fIarchive\fR. 160 .RE 161 162 .sp 163 .ne 2 164 .na 165 \fB\fB-i\fR\fR 166 .ad 167 .RS 6n 168 Positions new \fIfile\fRs in \fIarchive\fR before the file named by the 169 \fIposname\fR operand. This option is quivalent to \fB-b\fR. 170 .RE 171 172 .sp 173 .ne 2 174 .na 175 \fB\fB-m\fR\fR 176 .ad 177 .RS 6n 178 Moves \fIfile\fRs. If \fB-a\fR, \fB-b\fR, or \fB-i\fR with the \fIposname\fR 179 operand are specified, the \fB-m\fR option moves \fIfile\fRs to the new 180 position. Otherwise, \fB-m\fR moves \fIfile\fRs to the end of \fIarchive\fR. 181 .RE 182 183 .sp 184 .ne 2 185 .na 186 \fB\fB-p\fR\fR 187 .ad 188 .RS 6n 189 Prints the contents of \fIfile\fRs in \fIarchive\fR to standard output. If no 190 \fIfile\fRs are specified, the contents of all files in \fIarchive\fR are 191 written in the order of the archive. 192 .RE 193 194 .sp 195 .ne 2 196 .na 197 \fB\fB-q\fR\fR 198 .ad 199 .RS 6n 200 Quickly appends \fIfile\fRs to the end of \fIarchive\fR. Positioning options 201 \fB-a\fR, \fB-b\fR, and \fB-i\fR are invalid. The command does not check 202 whether the added \fIfile\fRs are already in \fIarchive\fR. This option is 203 useful to avoid quadratic behavior when creating a large archive 204 piece-by-piece. 205 .RE 206 207 .sp 208 .ne 2 209 .na 210 \fB\fB-r\fR\fR 211 .ad 212 .RS 6n 213 Replaces or adds \fIfile\fRs in \fIarchive\fR. If \fIarchive\fR does not exist, 214 a new archive file is created and a diagnostic message is written to standard 215 error, unless the \fB-c\fR option is specified. If no \fIfile\fRs are specified 216 and the \fIarchive\fR exists, the results are undefined. Files that replace 217 existing files do not change the order of the archive. If the \fB-u\fR option 218 is used with the \fB-r\fR option, only those files with dates of modification 219 later than the archive files are replaced. If the \fB-a\fR, \fB-b\fR, or 220 \fB-i\fR option is used, the \fIposname\fR argument must be present and 221 specifies that new files are to be placed after (\fB-a\fR) or before (\fB-b\fR 222 or \fB-i\fR) \fIposname\fR. Otherwise, the new files are placed at the end. 223 .RE 224 225 .sp 226 .ne 2 227 .na 228 \fB\fB-s\fR\fR 229 .ad 230 .RS 6n 231 Forces the regeneration of the archive symbol table even if \fBar\fR is not 232 invoked with an option that will modify the archive contents. This command is 233 useful to restore the archive symbol table after the \fBstrip\fR(1) command has 234 been used on the archive. 235 .RE 236 237 .sp 238 .ne 2 239 .na 240 \fB\fB-t\fR\fR 241 .ad 242 .RS 6n 243 Prints a table of contents of \fIarchive\fR. The files specified by the 244 \fIfile\fR operands are included in the written list. If no \fIfile\fR operands 245 are specified, all files in \fIarchive\fR are included in the order of the 246 archive. 247 .RE 248 249 .sp 250 .ne 2 251 .na 252 \fB\fB-T\fR\fR 253 .ad 254 .RS 6n 255 Allows file name truncation of extracted files whose archive names are longer 256 than the file system can support. By default, extracting a file with a name 257 that is too long is an error. In that case, a diagnostic message is written and 258 the file is not extracted. 259 .RE 260 261 .sp 262 .ne 2 263 .na 264 \fB\fB-u\fR\fR 265 .ad 266 .RS 6n 267 Updates older files. When used with the \fB-r\fR option, files within 268 \fIarchive\fR are replaced only if the corresponding \fIfile\fR has a 269 modification time that is at least as new as the modification time of the file 270 within \fIarchive\fR. 271 .RE 272 273 .sp 274 .ne 2 275 .na 276 \fB\fB-v\fR\fR 277 .ad 278 .RS 6n 279 Gives verbose output. When used with options \fB-d\fR, \fB-r\fR, or \fB-x\fR, 280 the \fB-v\fR option writes a detailed file-by-file description of the archive 281 creation and the constituent \fIfile\fRs, and maintenance activity. When used 282 with \fB-p\fR, \fB-v\fR writes the name of the file to the standard output 283 before writing the file itself to the standard output. When used with \fB-t\fR, 284 \fB-v\fR includes a long listing of information about the files within the 285 archive. When used with \fB-x\fR, \fB-v\fR prints the filename preceding each 286 extraction. When writing to an archive, \fB-v\fR writes a message to the 287 standard error. 288 .RE 289 290 .sp 291 .ne 2 292 .na 293 \fB\fB-V\fR\fR 294 .ad 295 .RS 6n 296 Prints its version number on standard error. 297 .RE 298 299 .SS "\fB/usr/xpg4/bin/ar\fR" 300 .sp 301 .LP 302 The following options are supported for \fB/usr/xpg4/bin/ar\fR: 303 .sp 304 .ne 2 305 .na 306 \fB\fB-v\fR\fR 307 .ad 308 .RS 6n 309 Same as the \fB/usr/bin/ar\fR version, except when writing to an archive, no 310 message is written to the standard error. 311 .RE 312 313 .sp 314 .ne 2 315 .na 316 \fB\fB-x\fR\fR 317 .ad 318 .RS 6n 319 Extracts the files named by the \fIfile\fR operands from \fIarchive\fR. The 320 contents of \fIarchive\fR are not changed. If no \fIfile\fR operands are given, 321 all files in \fIarchive\fR are extracted. If the file name of a file extracted 322 from \fIarchive\fR is longer than that supported in the directory to which it 323 is being extracted, the results are undefined. The modification time of each 324 \fIfile\fR extracted is set to the time \fIfile\fR is extracted from 325 \fIarchive\fR. 326 .RE 327 328 .SH OPERANDS 329 .sp 330 .LP 331 The following operands are supported: 332 .sp 333 .ne 2 334 .na 335 \fB\fIarchive\fR\fR 336 .ad 337 .RS 11n 338 A path name of the archive file. 339 .RE 340 341 .sp 342 .ne 2 343 .na 344 \fB\fIfile\fR\fR 345 .ad 346 .RS 11n 347 A path name. Only the last component is used when comparing against the names 348 of files in the archive. If two or more \fIfile\fR operands have the same last 349 path name component (see \fBbasename\fR(1)), the results are unspecified. The 350 implementation's archive format will not truncate valid file names of files 351 added to or replaced in the archive. 352 .RE 353 354 .sp 355 .ne 2 356 .na 357 \fB\fIposname\fR\fR 358 .ad 359 .RS 11n 360 The name of a file in the archive file, used for relative positioning. See 361 options \fB-m\fR and \fB-r\fR. 362 .RE 363 364 .SH ENVIRONMENT VARIABLES 365 .sp 366 .LP 367 See \fBenviron\fR(5) for descriptions of the following environment variables 368 that affect the execution of \fBar\fR: \fBLANG\fR, \fBLC_ALL\fR, 369 \fBLC_CTYPE\fR, \fBLC_MESSAGES\fR, \fBLC_TIME\fR, and \fBNLSPATH\fR. 370 .sp 371 .ne 2 372 .na 373 \fB\fBTMPDIR\fR\fR 374 .ad 375 .RS 10n 376 Determine the pathname that overrides the default directory for temporary 377 files, if any. 378 .RE 379 380 .sp 381 .ne 2 382 .na 383 \fB\fBTZ\fR\fR 384 .ad 385 .RS 10n 386 Determine the timezone used to calculate date and time strings written by 387 \fBar\fR \fB-tv\fR. If \fBTZ\fR is unset or null, an unspecified default 388 timezone is used. 389 .RE 390 391 .SH EXIT STATUS 392 .sp 393 .LP 394 The following exit values are returned: 395 .sp 396 .ne 2 397 .na 398 \fB\fB0\fR\fR 399 .ad 400 .RS 6n 401 Successful completion. 402 .RE 403 404 .sp 405 .ne 2 406 .na 407 \fB\fB>0\fR\fR 408 .ad 409 .RS 6n 410 An error occurred. 411 .RE 412 413 .SH ATTRIBUTES 414 .sp 415 .LP 416 See \fBattributes\fR(5) for descriptions of the following attributes: 417 .SS "\fB/usr/bin/ar\fR" 418 .sp 419 420 .sp 421 .TS 422 box; 423 c | c 424 l | l . 425 ATTRIBUTE TYPE ATTRIBUTE VALUE 426 _ 427 Interface Stability Committed 428 .TE 429 430 .SS "\fB/usr/xpg4/bin/ar\fR" 431 .sp 432 433 .sp 434 .TS 435 box; 436 c | c 437 l | l . 438 ATTRIBUTE TYPE ATTRIBUTE VALUE 439 _ 440 Interface Stability Committed 441 _ 442 Standard See \fBstandards\fR(5). 443 .TE 444 445 .SH SEE ALSO 446 .sp 447 .LP 448 \fBbasename\fR(1), \fBcpio\fR(1), \fBld\fR(1), \fBlorder\fR(1), \fBstrip\fR(1), 449 \fBtar\fR(1), \fBar.h\fR(3HEAD), \fBa.out\fR(4), \fBattributes\fR(5), 450 \fBenviron\fR(5), \fBstandards\fR(5) 451 .SH NOTES 452 .sp 453 .LP 454 If the same file is mentioned twice in an argument list, it may be put in the 455 archive twice. 456 .sp 457 .LP 458 By convention, archives are suffixed with "\fB\&.a\fR". 459 .sp 460 .LP 461 When inserting \fBELF\fR objects into an archive file, \fBar\fR might add 462 "\fB\en\fR" characters to pad these objects to an 8-byte boundary. Such padding 463 improves the efficiency with which \fBld\fR(1) can access the archive. Only 464 \fBELF\fR object files are padded in this way. Other archive members are not 465 altered. When an object with such padding is extracted from an archive, the 466 padding is not included in the resulting output.