Print this page
Initial modifications using the code changes present between
the LSI source code for FreeBSD drivers. Specifically the changes
between from mpslsi-source-17.00.00.00 -> mpslsi-source-03.00.00.00.
This mainly involves using a different scatter/gather element in
frame setup.
*** 18,29 ****
*
* CDDL HEADER END
*/
/*
! * Copyright (c) 2000 to 2009, LSI Corporation.
! * All rights reserved.
*
* Redistribution and use in source and binary forms of all code within
* this file that is exclusively owned by LSI, with or without
* modification, is permitted provided that, in addition to the CDDL 1.0
* License requirements, the following conditions are met:
--- 18,28 ----
*
* CDDL HEADER END
*/
/*
! * Copyright (c) 2000-2012 LSI Corporation.
*
* Redistribution and use in source and binary forms of all code within
* this file that is exclusively owned by LSI, with or without
* modification, is permitted provided that, in addition to the CDDL 1.0
* License requirements, the following conditions are met:
*** 49,59 ****
/*
* Name: mpi2_sas.h
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: February 9, 2007
*
! * mpi2.h Version: 02.00.02
*
* Version History
* ---------------
*
* Date Version Description
--- 48,63 ----
/*
* Name: mpi2_sas.h
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: February 9, 2007
*
! * mpi2_sas.h Version: 02.00.xx
! *
! * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
! * prefix are for use only on MPI v2.5 products, and must not be used
! * with MPI v2.0 products. Unless otherwise noted, names beginning with
! * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
*
* Version History
* ---------------
*
* Date Version Description
*** 61,70 ****
--- 65,78 ----
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
* Control Request.
* 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
* Request.
+ * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
+ * to MPI2_SGE_IO_UNION since it supports chained SGLs.
+ * 05-12-10 02.00.04 Modified some comments.
+ * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control.
* --------------------------------------------------------------------------
*/
#ifndef MPI2_SAS_H
#define MPI2_SAS_H
*** 135,161 ****
U8 PassthroughFlags; /* 0x00 */
U8 PhysicalPort; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 RequestDataLength; /* 0x04 */
! U8 SGLFlags; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved1; /* 0x0A */
U32 Reserved2; /* 0x0C */
U64 SASAddress; /* 0x10 */
U32 Reserved3; /* 0x18 */
U32 Reserved4; /* 0x1C */
! MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */
} MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t;
/* values for PassthroughFlags field */
#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
! /* values for SGLFlags field are in the SGL section of mpi2.h */
/* SMP Passthrough Reply Message */
typedef struct _MPI2_SMP_PASSTHROUGH_REPLY
{
--- 143,169 ----
U8 PassthroughFlags; /* 0x00 */
U8 PhysicalPort; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 RequestDataLength; /* 0x04 */
! U8 SGLFlags; /* 0x06 */ /* MPI v2.0 only. Reserved on MPI v2.5. */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved1; /* 0x0A */
U32 Reserved2; /* 0x0C */
U64 SASAddress; /* 0x10 */
U32 Reserved3; /* 0x18 */
U32 Reserved4; /* 0x1C */
! MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ /* MPI v2.5: IEEE Simple 64 elements only */
} MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t;
/* values for PassthroughFlags field */
#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
! /* MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
/* SMP Passthrough Reply Message */
typedef struct _MPI2_SMP_PASSTHROUGH_REPLY
{
*** 193,213 ****
{
U16 DevHandle; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 PassthroughFlags; /* 0x04 */
! U8 SGLFlags; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved1; /* 0x0A */
U32 Reserved2; /* 0x0C */
U32 Reserved3; /* 0x10 */
U32 Reserved4; /* 0x14 */
U32 DataLength; /* 0x18 */
U8 CommandFIS[20]; /* 0x1C */
! MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */
} MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t;
/* values for PassthroughFlags field */
#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
--- 201,221 ----
{
U16 DevHandle; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 PassthroughFlags; /* 0x04 */
! U8 SGLFlags; /* 0x06 */ /* MPI v2.0 only. Reserved on MPI v2.5. */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved1; /* 0x0A */
U32 Reserved2; /* 0x0C */
U32 Reserved3; /* 0x10 */
U32 Reserved4; /* 0x14 */
U32 DataLength; /* 0x18 */
U8 CommandFIS[20]; /* 0x1C */
! MPI2_SGE_IO_UNION SGL; /* 0x30 */ /* MPI v2.5: IEEE 64 elements only */
} MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t;
/* values for PassthroughFlags field */
#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
*** 215,225 ****
#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
! /* values for SGLFlags field are in the SGL section of mpi2.h */
/* SATA Passthrough Reply Message */
typedef struct _MPI2_SATA_PASSTHROUGH_REPLY
{
--- 223,233 ----
#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
! /* MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
/* SATA Passthrough Reply Message */
typedef struct _MPI2_SATA_PASSTHROUGH_REPLY
{
*** 286,295 ****
--- 294,309 ----
#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
#define MPI2_SAS_OP_REMOVE_DEVICE (0x0D)
#define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E)
#define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F)
+ #define MPI25_SAS_OP_ENABLE_FP_DEVICE (0x10)
+ #define MPI25_SAS_OP_DISABLE_FP_DEVICE (0x11)
+ #define MPI25_SAS_OP_ENABLE_FP_ALL (0x12)
+ #define MPI25_SAS_OP_DISABLE_FP_ALL (0x13)
+ #define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14)
+ #define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15)
#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
/* values for the PrimFlags field */
#define MPI2_SAS_PRIMFLAGS_SINGLE (0x08)
#define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02)