1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 2000 to 2009, LSI Corporation. 24 * All rights reserved. 25 * 26 * Redistribution and use in source and binary forms of all code within 27 * this file that is exclusively owned by LSI, with or without 28 * modification, is permitted provided that, in addition to the CDDL 1.0 29 * License requirements, the following conditions are met: 30 * 31 * Neither the name of the author nor the names of its contributors may be 32 * used to endorse or promote products derived from this software without 33 * specific prior written permission. 34 * 35 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 36 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 37 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 38 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 39 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 40 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 41 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 42 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 43 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 44 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 45 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 46 * DAMAGE. 47 */ 48 49 /* 50 * Name: mpi2_init.h 51 * Title: MPI SCSI initiator mode messages and structures 52 * Creation Date: June 23, 2006 53 * 54 * mpi2_init.h Version: 02.00.07 55 * 56 * Version History 57 * --------------- 58 * 59 * Date Version Description 60 * -------- -------- ------------------------------------------------------ 61 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 62 * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. 63 * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. 64 * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. 65 * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. 66 * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. 67 * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO 68 * Control field Task Attribute flags. 69 * Moved LUN field defines to mpi2.h becasue they are 70 * common to many structures. 71 * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to 72 * Query Asynchronous Event. 73 * Defined two new bits in the SlotStatus field of the SCSI 74 * Enclosure Processor Request and Reply. 75 * -------------------------------------------------------------------------- 76 */ 77 78 #ifndef MPI2_INIT_H 79 #define MPI2_INIT_H 80 81 /***************************************************************************** 82 * 83 * SCSI Initiator Messages 84 * 85 *****************************************************************************/ 86 87 /**************************************************************************** 88 * SCSI IO messages and associated structures 89 ****************************************************************************/ 90 91 typedef struct 92 { 93 U8 CDB[20]; /* 0x00 */ 94 U32 PrimaryReferenceTag; /* 0x14 */ 95 U16 PrimaryApplicationTag; /* 0x18 */ 96 U16 PrimaryApplicationTagMask; /* 0x1A */ 97 U32 TransferLength; /* 0x1C */ 98 } MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32, 99 Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t; 100 101 /* TBD: I don't think this is needed for MPI2/Gen2 */ 102 #if 0 103 typedef struct 104 { 105 U8 CDB[16]; /* 0x00 */ 106 U32 DataLength; /* 0x10 */ 107 U32 PrimaryReferenceTag; /* 0x14 */ 108 U16 PrimaryApplicationTag; /* 0x18 */ 109 U16 PrimaryApplicationTagMask; /* 0x1A */ 110 U32 TransferLength; /* 0x1C */ 111 } MPI2_SCSI_IO32_CDB_EEDP16, MPI2_POINTER PTR_MPI2_SCSI_IO32_CDB_EEDP16, 112 Mpi2ScsiIo32CdbEedp16_t, MPI2_POINTER pMpi2ScsiIo32CdbEedp16_t; 113 #endif 114 115 typedef union 116 { 117 U8 CDB32[32]; 118 MPI2_SCSI_IO_CDB_EEDP32 EEDP32; 119 MPI2_SGE_SIMPLE_UNION SGE; 120 } MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION, 121 Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t; 122 123 /* SCSI IO Request Message */ 124 typedef struct _MPI2_SCSI_IO_REQUEST 125 { 126 U16 DevHandle; /* 0x00 */ 127 U8 ChainOffset; /* 0x02 */ 128 U8 Function; /* 0x03 */ 129 U16 Reserved1; /* 0x04 */ 130 U8 Reserved2; /* 0x06 */ 131 U8 MsgFlags; /* 0x07 */ 132 U8 VP_ID; /* 0x08 */ 133 U8 VF_ID; /* 0x09 */ 134 U16 Reserved3; /* 0x0A */ 135 U32 SenseBufferLowAddress; /* 0x0C */ 136 U16 SGLFlags; /* 0x10 */ 137 U8 SenseBufferLength; /* 0x12 */ 138 U8 Reserved4; /* 0x13 */ 139 U8 SGLOffset0; /* 0x14 */ 140 U8 SGLOffset1; /* 0x15 */ 141 U8 SGLOffset2; /* 0x16 */ 142 U8 SGLOffset3; /* 0x17 */ 143 U32 SkipCount; /* 0x18 */ 144 U32 DataLength; /* 0x1C */ 145 U32 BidirectionalDataLength; /* 0x20 */ 146 U16 IoFlags; /* 0x24 */ 147 U16 EEDPFlags; /* 0x26 */ 148 U32 EEDPBlockSize; /* 0x28 */ 149 U32 SecondaryReferenceTag; /* 0x2C */ 150 U16 SecondaryApplicationTag; /* 0x30 */ 151 U16 ApplicationTagTranslationMask; /* 0x32 */ 152 U8 LUN[8]; /* 0x34 */ 153 U32 Control; /* 0x3C */ 154 MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */ 155 MPI2_SGE_IO_UNION SGL; /* 0x60 */ 156 } MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST, 157 Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t; 158 159 /* SCSI IO MsgFlags bits */ 160 161 /* MsgFlags for SenseBufferAddressSpace */ 162 #define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C) 163 #define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00) 164 #define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04) 165 #define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) 166 #define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) 167 168 /* SCSI IO SGLFlags bits */ 169 170 /* base values for Data Location Address Space */ 171 #define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C) 172 #define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00) 173 #define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04) 174 #define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08) 175 #define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) 176 177 /* base values for Type */ 178 #define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03) 179 #define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00) 180 #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01) 181 #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02) 182 183 /* shift values for each sub-field */ 184 #define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12) 185 #define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8) 186 #define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) 187 #define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) 188 189 /* SCSI IO IoFlags bits */ 190 191 /* Large CDB Address Space */ 192 #define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000) 193 #define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000) 194 #define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000) 195 #define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000) 196 #define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000) 197 198 #define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) 199 #define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) 200 #define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400) 201 #define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200) 202 #define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) 203 204 /* SCSI IO EEDPFlags bits */ 205 206 #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000) 207 #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000) 208 #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000) 209 #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000) 210 211 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400) 212 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200) 213 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100) 214 215 #define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) 216 217 #define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007) 218 #define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000) 219 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001) 220 #define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002) 221 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) 222 #define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004) 223 #define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006) 224 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007) 225 226 /* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */ 227 228 /* SCSI IO Control bits */ 229 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000) 230 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) 231 232 #define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) 233 #define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) 234 #define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) 235 #define MPI2_SCSIIO_CONTROL_READ (0x02000000) 236 #define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000) 237 238 #define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) 239 #define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) 240 241 #define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) 242 #define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) 243 #define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100) 244 #define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200) 245 #define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400) 246 247 #define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0) 248 #define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000) 249 #define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040) 250 #define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080) 251 252 253 /* SCSI IO Error Reply Message */ 254 typedef struct _MPI2_SCSI_IO_REPLY 255 { 256 U16 DevHandle; /* 0x00 */ 257 U8 MsgLength; /* 0x02 */ 258 U8 Function; /* 0x03 */ 259 U16 Reserved1; /* 0x04 */ 260 U8 Reserved2; /* 0x06 */ 261 U8 MsgFlags; /* 0x07 */ 262 U8 VP_ID; /* 0x08 */ 263 U8 VF_ID; /* 0x09 */ 264 U16 Reserved3; /* 0x0A */ 265 U8 SCSIStatus; /* 0x0C */ 266 U8 SCSIState; /* 0x0D */ 267 U16 IOCStatus; /* 0x0E */ 268 U32 IOCLogInfo; /* 0x10 */ 269 U32 TransferCount; /* 0x14 */ 270 U32 SenseCount; /* 0x18 */ 271 U32 ResponseInfo; /* 0x1C */ 272 U16 TaskTag; /* 0x20 */ 273 U16 Reserved4; /* 0x22 */ 274 U32 BidirectionalTransferCount; /* 0x24 */ 275 U32 Reserved5; /* 0x28 */ 276 U32 Reserved6; /* 0x2C */ 277 } MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY, 278 Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t; 279 280 /* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ 281 282 #define MPI2_SCSI_STATUS_GOOD (0x00) 283 #define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02) 284 #define MPI2_SCSI_STATUS_CONDITION_MET (0x04) 285 #define MPI2_SCSI_STATUS_BUSY (0x08) 286 #define MPI2_SCSI_STATUS_INTERMEDIATE (0x10) 287 #define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) 288 #define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18) 289 #define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */ 290 #define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28) 291 #define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30) 292 #define MPI2_SCSI_STATUS_TASK_ABORTED (0x40) 293 294 /* SCSI IO Reply SCSIState flags */ 295 296 #define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10) 297 #define MPI2_SCSI_STATE_TERMINATED (0x08) 298 #define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04) 299 #define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02) 300 #define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01) 301 302 #define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF) 303 304 305 /**************************************************************************** 306 * SCSI Task Management messages 307 ****************************************************************************/ 308 309 /* SCSI Task Management Request Message */ 310 typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST 311 { 312 U16 DevHandle; /* 0x00 */ 313 U8 ChainOffset; /* 0x02 */ 314 U8 Function; /* 0x03 */ 315 U8 Reserved1; /* 0x04 */ 316 U8 TaskType; /* 0x05 */ 317 U8 Reserved2; /* 0x06 */ 318 U8 MsgFlags; /* 0x07 */ 319 U8 VP_ID; /* 0x08 */ 320 U8 VF_ID; /* 0x09 */ 321 U16 Reserved3; /* 0x0A */ 322 U8 LUN[8]; /* 0x0C */ 323 U32 Reserved4[7]; /* 0x14 */ 324 U16 TaskMID; /* 0x30 */ 325 U16 Reserved5; /* 0x32 */ 326 } MPI2_SCSI_TASK_MANAGE_REQUEST, 327 MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST, 328 Mpi2SCSITaskManagementRequest_t, 329 MPI2_POINTER pMpi2SCSITaskManagementRequest_t; 330 331 /* TaskType values */ 332 333 #define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) 334 #define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) 335 #define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) 336 #define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) 337 #define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) 338 #define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) 339 #define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) 340 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) 341 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A) 342 343 /* obsolete TaskType name */ 344 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT) 345 346 /* MsgFlags bits */ 347 348 #define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) 349 #define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) 350 #define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) 351 #define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) 352 353 #define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) 354 355 356 357 /* SCSI Task Management Reply Message */ 358 typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY 359 { 360 U16 DevHandle; /* 0x00 */ 361 U8 MsgLength; /* 0x02 */ 362 U8 Function; /* 0x03 */ 363 U8 ResponseCode; /* 0x04 */ 364 U8 TaskType; /* 0x05 */ 365 U8 Reserved1; /* 0x06 */ 366 U8 MsgFlags; /* 0x07 */ 367 U8 VP_ID; /* 0x08 */ 368 U8 VF_ID; /* 0x09 */ 369 U16 Reserved2; /* 0x0A */ 370 U16 Reserved3; /* 0x0C */ 371 U16 IOCStatus; /* 0x0E */ 372 U32 IOCLogInfo; /* 0x10 */ 373 U32 TerminationCount; /* 0x14 */ 374 } MPI2_SCSI_TASK_MANAGE_REPLY, 375 MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY, 376 Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t; 377 378 /* ResponseCode values */ 379 380 #define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00) 381 #define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02) 382 #define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04) 383 #define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05) 384 #define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) 385 #define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) 386 #define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) 387 388 389 /**************************************************************************** 390 * SCSI Enclosure Processor messages 391 ****************************************************************************/ 392 393 /* SCSI Enclosure Processor Request Message */ 394 typedef struct _MPI2_SEP_REQUEST 395 { 396 U16 DevHandle; /* 0x00 */ 397 U8 ChainOffset; /* 0x02 */ 398 U8 Function; /* 0x03 */ 399 U8 Action; /* 0x04 */ 400 U8 Flags; /* 0x05 */ 401 U8 Reserved1; /* 0x06 */ 402 U8 MsgFlags; /* 0x07 */ 403 U8 VP_ID; /* 0x08 */ 404 U8 VF_ID; /* 0x09 */ 405 U16 Reserved2; /* 0x0A */ 406 U32 SlotStatus; /* 0x0C */ 407 U32 Reserved3; /* 0x10 */ 408 U32 Reserved4; /* 0x14 */ 409 U32 Reserved5; /* 0x18 */ 410 U16 Slot; /* 0x1C */ 411 U16 EnclosureHandle; /* 0x1E */ 412 } MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST, 413 Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t; 414 415 /* Action defines */ 416 #define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00) 417 #define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01) 418 419 /* Flags defines */ 420 #define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00) 421 #define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) 422 423 /* SlotStatus defines */ 424 #define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) 425 #define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) 426 #define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) 427 #define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) 428 #define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) 429 #define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) 430 #define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) 431 #define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) 432 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) 433 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) 434 #define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) 435 436 437 /* SCSI Enclosure Processor Reply Message */ 438 typedef struct _MPI2_SEP_REPLY 439 { 440 U16 DevHandle; /* 0x00 */ 441 U8 MsgLength; /* 0x02 */ 442 U8 Function; /* 0x03 */ 443 U8 Action; /* 0x04 */ 444 U8 Flags; /* 0x05 */ 445 U8 Reserved1; /* 0x06 */ 446 U8 MsgFlags; /* 0x07 */ 447 U8 VP_ID; /* 0x08 */ 448 U8 VF_ID; /* 0x09 */ 449 U16 Reserved2; /* 0x0A */ 450 U16 Reserved3; /* 0x0C */ 451 U16 IOCStatus; /* 0x0E */ 452 U32 IOCLogInfo; /* 0x10 */ 453 U32 SlotStatus; /* 0x14 */ 454 U32 Reserved4; /* 0x18 */ 455 U16 Slot; /* 0x1C */ 456 U16 EnclosureHandle; /* 0x1E */ 457 } MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY, 458 Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t; 459 460 /* SlotStatus defines */ 461 #define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) 462 #define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) 463 #define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) 464 #define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) 465 #define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) 466 #define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) 467 #define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) 468 #define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) 469 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) 470 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) 471 #define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) 472 473 474 #endif 475 476