1 '\" te
   2 .\" Copyright (c) 2009, Sun Microsystems, Inc. All Rights Reserved.
   3 .\" Copyright 2015 RackTop Systems.
   4 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
   5 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
   6 .\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
   7 .TH SMF_METHOD 5 "March 2, 2017"
   8 .SH NAME
   9 smf_method \- service management framework conventions for methods
  10 .SH DESCRIPTION
  11 .LP
  12 The class of services managed by \fBsvc.startd\fR(1M) in the service management
  13 framework, \fBsmf\fR(5), consists of applications that fit a simple
  14 \fBfork\fR(2)-\fBexec\fR(2) model. The \fBsvc.startd\fR(1M) master daemon and
  15 other restarters support the \fBfork\fR(2)-\fBexec\fR(2) model, potentially
  16 with additional capabilities. The \fBsvc.startd\fR(1M) daemon and other
  17 restarters require that the methods which activate, manipulate, or examine a
  18 service instance follow the conventions described in this manual page.
  19 .SS "Invocation form"
  20 .LP
  21 The form of a method invocation is not dictated by convention. In some cases, a
  22 method invocation might consist of the direct invocation of the daemon or other
  23 binary executable that provides the service. For cases in which an executable
  24 script or other mediating executable is used, the convention recommends the
  25 form:
  26 .sp
  27 .in +2
  28 .nf
  29 /path/to/method_executable abbr_method_name
  30 .fi
  31 .in -2
  32 
  33 .sp
  34 .LP
  35 The \fIabbr_method_name\fR used for the recommended form is a supported method
  36 such as \fBstart\fR or \fBstop\fR. The set of methods supported by a restarter
  37 is given on the related restarter page. The \fBsvc.startd\fR(1M) daemon
  38 supports \fBstart\fR, \fBstop\fR, and \fBrefresh\fR methods.
  39 .sp
  40 .LP
  41 A restarter might define other kinds of methods beyond those referenced in this
  42 page. The conventions surrounding such extensions are defined by the restarter
  43 and might not be identical to those given here.
  44 .SS "Environment Variables"
  45 .LP
  46 The restarter provides four environment variables to the method that determine
  47 the context in which the method is invoked.
  48 .sp
  49 .ne 2
  50 .na
  51 \fB\fBSMF_FMRI\fR\fR
  52 .ad
  53 .sp .6
  54 .RS 4n
  55 The service fault management resource identifier (FMRI) of the instance for
  56 which the method is invoked.
  57 .RE
  58 
  59 .sp
  60 .ne 2
  61 .na
  62 \fB\fBSMF_METHOD\fR\fR
  63 .ad
  64 .sp .6
  65 .RS 4n
  66 The full name of the method being invoked, such as \fBstart\fR or \fBstop\fR.
  67 .RE
  68 
  69 .sp
  70 .ne 2
  71 .na
  72 \fB\fBSMF_RESTARTER\fR\fR
  73 .ad
  74 .sp .6
  75 .RS 4n
  76 The service FMRI of the restarter that invokes the method
  77 .RE
  78 
  79 .sp
  80 .ne 2
  81 .na
  82 \fB\fBSMF_ZONENAME\fR\fR
  83 .ad
  84 .sp .6
  85 .RS 4n
  86 The name of the zone in which the method is running. This can also be obtained
  87 by using the \fBzonename\fR(1) command.
  88 .RE
  89 
  90 .sp
  91 .LP
  92 These variables should be removed from the environment prior to the invocation
  93 of any persistent process by the method. A convenience shell function,
  94 \fBsmf_clear_env\fR, is given for service authors who use Bourne-compatible
  95 shell scripting to compose service methods in the include file described below.
  96 .sp
  97 .LP
  98 The method context can cause other environment variables to be set as described
  99 below.
 100 .SS "Method Definition"
 101 .LP
 102 A method is defined minimally by three properties in a propertygroup of type
 103 \fBmethod\fR.
 104 .sp
 105 .LP
 106 These properties are:
 107 .sp
 108 .ne 2
 109 .na
 110 \fBexec (\fIastring\fR)\fR
 111 .ad
 112 .RS 27n
 113 Method executable string.
 114 .RE
 115 
 116 .sp
 117 .ne 2
 118 .na
 119 \fBtimeout_seconds (\fIcount\fR)\fR
 120 .ad
 121 .RS 27n
 122 Number of seconds before method times out. See the \fBTimeouts\fR section for
 123 more detail.
 124 .RE
 125 
 126 .sp
 127 .ne 2
 128 .na
 129 \fBtype (\fIastring\fR)\fR
 130 .ad
 131 .RS 27n
 132 Method type. Currently always set to \fBmethod\fR.
 133 .RE
 134 
 135 .sp
 136 .LP
 137 A Method Context can be defined to further refine the execution environment of
 138 the method. See the \fBMethod Context\fR section for more information.
 139 .SS "Method Tokens"
 140 .LP
 141 When defined in the \fBexec\fR string of the method by the restarter
 142 \fBsvc.startd\fR, a set of tokens are parsed and expanded with appropriate
 143 value. Other restarters might not support method tokens. The delegated
 144 restarter for inet services, \fBinetd\fR(1M), does not support the following
 145 method expansions.
 146 .sp
 147 .ne 2
 148 .na
 149 \fB\fB%%\fR\fR
 150 .ad
 151 .sp .6
 152 .RS 4n
 153 %
 154 .RE
 155 
 156 .sp
 157 .ne 2
 158 .na
 159 \fB\fB%r\fR\fR
 160 .ad
 161 .sp .6
 162 .RS 4n
 163 Name of the restarter, such as \fBsvc.startd\fR
 164 .RE
 165 
 166 .sp
 167 .ne 2
 168 .na
 169 \fB\fB%m\fR\fR
 170 .ad
 171 .sp .6
 172 .RS 4n
 173 The full name of the method being invoked, such as \fBstart\fR or \fBstop\fR.
 174 .RE
 175 
 176 .sp
 177 .ne 2
 178 .na
 179 \fB\fB%s\fR\fR
 180 .ad
 181 .sp .6
 182 .RS 4n
 183 Name of the service
 184 .RE
 185 
 186 .sp
 187 .ne 2
 188 .na
 189 \fB\fB%i\fR\fR
 190 .ad
 191 .sp .6
 192 .RS 4n
 193 Name of the instance
 194 .RE
 195 
 196 .sp
 197 .ne 2
 198 .na
 199 \fB\fB\fR\fB%f\fR\fR
 200 .ad
 201 .sp .6
 202 .RS 4n
 203 FMRI of the instance
 204 .RE
 205 
 206 .sp
 207 .ne 2
 208 .na
 209 \fB\fB%{prop[:,]}\fR\fR
 210 .ad
 211 .sp .6
 212 .RS 4n
 213 Value(s) of a property. The \fBprop\fR might be a property FMRI, a property
 214 group name and a property name separated by a \fB/\fR, or a property name in
 215 the \fBapplication\fR property group. These values can be followed by a \fB,\fR
 216 (comma) or \fB:\fR (colon). If present, the separators are used to separate
 217 multiple values. If absent, a space is used. The following shell metacharacters
 218 encountered in string values are quoted with a \ (backslash):
 219 .sp
 220 .in +2
 221 .nf
 222 ; & ( ) | ^ < > newline space tab  \  " '
 223 .fi
 224 .in -2
 225 
 226 An invalid expansion constitutes method failure.
 227 .RE
 228 
 229 .sp
 230 .LP
 231 Two explicit tokens can be used in the place of method commands.
 232 .sp
 233 .ne 2
 234 .na
 235 \fB\fB:kill [-signal]\fR\fR
 236 .ad
 237 .sp .6
 238 .RS 4n
 239 Sends the specified signal, which is \fBSIGTERM\fR by default, to all processes
 240 in the primary instance contract. Always returns \fBSMF_EXIT_OK\fR. This token
 241 should be used to replace common \fBpkill\fR invocations.
 242 .RE
 243 
 244 .sp
 245 .ne 2
 246 .na
 247 \fB\fB:true\fR\fR
 248 .ad
 249 .sp .6
 250 .RS 4n
 251 Always returns \fBSMF_EXIT_OK\fR. This token should be used for methods that
 252 are required by the restarter but which are unnecessary for the particular
 253 service implementation.
 254 .RE
 255 
 256 .SS "Exiting and Exit Status"
 257 .LP
 258 The required behavior of a start method is to delay exiting until the service
 259 instance is ready to answer requests or is otherwise functional.
 260 .sp
 261 .LP
 262 The following exit status codes are defined in \fB<libscf.h>\fR and in the
 263 shell support file.
 264 .sp
 265 
 266 .sp
 267 .TS
 268 l l l
 269 l l l .
 270 \fBSMF_EXIT_OK\fR       \fB0\fR T{
 271 Method exited, performing its operation successfully.
 272 T}
 273 \fBSMF_EXIT_ERR_FATAL\fR        \fB95\fR        T{
 274 Method failed fatally and is unrecoverable without administrative intervention.
 275 T}
 276 \fBSMF_EXIT_ERR_CONFIG\fR       \fB96\fR        T{
 277 Unrecoverable configuration error. A common condition that returns this exit status is the absence of required configuration files for an enabled service instance.
 278 T}
 279 \fBSMF_EXIT_ERR_NOSMF\fR        \fB99\fR        T{
 280 Method has been mistakenly invoked outside the \fBsmf\fR(5) facility. Services that depend on \fBsmf\fR(5) capabilities should exit with this status value.
 281 T}
 282 \fBSMF_EXIT_ERR_PERM\fR \fB100\fR       T{
 283 Method requires a form of permission such as file access, privilege, authorization, or other credential that is not available when invoked.
 284 T}
 285 \fBSMF_EXIT_TEMP_TRANSIENT\fR   \fB101\fR       T{
 286 Method that is normally non-transient is temporarily transient.  This is not an error condition and a service returning this value will not be restarted.
 287 T}
 288 \fBSMF_EXIT_ERR_OTHER\fR        \fBnon-zero\fR  T{
 289 Any non-zero exit status from a method is treated as an unknown error. A series of unknown errors can be diagnosed as a fault by the restarter or on behalf of the restarter.
 290 T}
 291 .TE
 292 
 293 .sp
 294 .LP
 295 Use of a precise exit code allows the responsible restarter to categorize an
 296 error response as likely to be intermittent and worth pursuing restart or
 297 permanent and request administrative intervention.
 298 .SS "Timeouts"
 299 .LP
 300 Each method can have an independent timeout, given in seconds. The choice of a
 301 particular timeout should be based on site expectations for detecting a method
 302 failure due to non-responsiveness. Sites with replicated filesystems or other
 303 failover resources can elect to lengthen method timeouts from the default.
 304 Sites with no remote resources can elect to shorten the timeouts. Method
 305 timeout is specified by the \fBtimeout_seconds\fR property.
 306 .sp
 307 .LP
 308 If you specify \fB0 timeout_seconds\fR for a method, it declares to the
 309 restarter that there is no timeout for the service. This setting is not
 310 preferred, but is available for services that absolutely require it.
 311 .sp
 312 .LP
 313 \fB-1 timeout_seconds\fR is also accepted, but is a deprecated specification.
 314 .SS "Shell Programming Support"
 315 .LP
 316 A set of environment variables that define the above exit status values is
 317 provided with convenience shell functions in the file
 318 \fB/lib/svc/share/smf_include.sh\fR. This file is a Bourne shell script
 319 suitable for inclusion via the source operator in any Bourne-compatible shell.
 320 .sp
 321 .LP
 322 To assist in the composition of scripts that can serve as SMF methods as well
 323 as \fB/etc/init.d\fR scripts, the \fBsmf_present()\fR shell function is
 324 provided. If the \fBsmf\fR(5) facility is not available, \fBsmf_present()\fR
 325 returns a non-zero exit status.
 326 .sp
 327 .LP
 328 One possible structure for such a script follows:
 329 .sp
 330 .in +2
 331 .nf
 332 if smf_present; then
 333       # Shell code to run application as managed service
 334       ....
 335 
 336       smf_clear_env
 337 else
 338       # Shell code to run application as /etc/init.d script
 339       ....
 340 fi
 341 .fi
 342 .in -2
 343 
 344 .sp
 345 .LP
 346 This example shows the use of both convenience functions that are provided.
 347 .SS "Method Context"
 348 .LP
 349 The service management facility offers a common mechanism set the context in
 350 which the \fBfork\fR(2)-\fBexec\fR(2) model services execute.
 351 .sp
 352 .LP
 353 The desired method context should be provided by the service developer. All
 354 service instances should run with the lowest level of privileges possible to
 355 limit potential security compromises.
 356 .sp
 357 .LP
 358 A method context can contain the following properties:
 359 .sp
 360 .ne 2
 361 .na
 362 \fB\fBuse_profile\fR\fR
 363 .ad
 364 .sp .6
 365 .RS 4n
 366 A boolean that specifies whether the profile should be used instead of the
 367 \fBuser\fR, \fBgroup\fR, \fBprivileges\fR, and \fBlimit_privileges\fR
 368 properties.
 369 .RE
 370 
 371 .sp
 372 .ne 2
 373 .na
 374 \fBenvironment\fR
 375 .ad
 376 .sp .6
 377 .RS 4n
 378 Environment variables to insert into the environment of the method, in the form
 379 of a number of \fBNAME=value\fR strings.
 380 .RE
 381 
 382 .sp
 383 .ne 2
 384 .na
 385 \fB\fBprofile\fR\fR
 386 .ad
 387 .sp .6
 388 .RS 4n
 389 The name of an RBAC (role-based access control) profile which, along with the
 390 method executable, identifies an entry in \fBexec_attr\fR(4).
 391 .RE
 392 
 393 .sp
 394 .ne 2
 395 .na
 396 \fB\fBuser\fR\fR
 397 .ad
 398 .sp .6
 399 .RS 4n
 400 The user ID in numeric or text form.
 401 .RE
 402 
 403 .sp
 404 .ne 2
 405 .na
 406 \fB\fBgroup\fR\fR
 407 .ad
 408 .sp .6
 409 .RS 4n
 410 The group ID in numeric or text form.
 411 .RE
 412 
 413 .sp
 414 .ne 2
 415 .na
 416 \fB\fBsupp_groups\fR\fR
 417 .ad
 418 .sp .6
 419 .RS 4n
 420 An optional string that specifies the supplemental group memberships by ID, in
 421 numeric or text form.
 422 .RE
 423 
 424 .sp
 425 .ne 2
 426 .na
 427 \fB\fBprivileges\fR\fR
 428 .ad
 429 .sp .6
 430 .RS 4n
 431 An optional string specifying the privilege set as defined in
 432 \fBprivileges\fR(5).
 433 .RE
 434 
 435 .sp
 436 .ne 2
 437 .na
 438 \fB\fBlimit_privileges\fR\fR
 439 .ad
 440 .sp .6
 441 .RS 4n
 442 An optional string specifying the limit privilege set as defined in
 443 \fBprivileges\fR(5).
 444 .RE
 445 
 446 .sp
 447 .ne 2
 448 .na
 449 \fB\fBworking_directory\fR\fR
 450 .ad
 451 .sp .6
 452 .RS 4n
 453 The home directory from which to launch the method. \fB:home\fR can be used as
 454 a token to indicate the home directory of the user whose \fBuid\fR is used to
 455 launch the method. If the property is unset, \fB:home\fR is used.
 456 .RE
 457 
 458 .sp
 459 .ne 2
 460 .na
 461 \fB\fBsecurity_flags\fR\fR
 462 .ad
 463 .sp .6
 464 .RS 4n
 465 The security flags to apply when launching the method.  See \fBsecurity-flags\fR(5).
 466 .sp
 467 .LP
 468 The "default" keyword specifies those flags specified in
 469 \fBsvc:/system/process-security\fR.  The "all" keyword enables all flags, the
 470 "none" keyword enables no flags.  The "current" keyword specifies the current
 471 flags.  Flags may be added by specifying their name (optionally preceded
 472 by '+'), and removed by preceding their name with '-').
 473 .sp
 474 .LP
 475 Use of "all" has associated risks, as future versions of the system may
 476 include further flags which may harm poorly implemented software.
 477 .RE
 478 
 479 .sp
 480 .ne 2
 481 .na
 482 \fB\fBcorefile_pattern\fR\fR
 483 .ad
 484 .sp .6
 485 .RS 4n
 486 An optional string that specifies the corefile pattern to use for the service,
 487 as per \fBcoreadm\fR(1M). Most restarters supply a default. Setting this
 488 property overrides local customizations to the global core pattern.
 489 .RE
 490 
 491 .sp
 492 .ne 2
 493 .na
 494 \fB\fBproject\fR\fR
 495 .ad
 496 .sp .6
 497 .RS 4n
 498 The project ID in numeric or text form. \fB:default\fR can be used as a token
 499 to indicate a project identified by \fBgetdefaultproj\fR(3PROJECT) for the user
 500 whose \fBuid\fR is used to launch the method.
 501 .RE
 502 
 503 .sp
 504 .ne 2
 505 .na
 506 \fB\fBresource_pool\fR\fR
 507 .ad
 508 .sp .6
 509 .RS 4n
 510 The resource pool name on which to launch the method. \fB:default\fR can be
 511 used as a token to indicate the pool specified in the \fBproject\fR(4) entry
 512 given in the \fBproject\fR attribute above.
 513 .RE
 514 
 515 .sp
 516 .LP
 517 The method context can be set for the entire service instance by specifying a
 518 \fBmethod_context\fR property group for the service or instance. A method might
 519 override the instance method context by providing the method context properties
 520 on the method property group.
 521 .sp
 522 .LP
 523 Invalid method context settings always lead to failure of the method, with the
 524 exception of invalid environment variables that issue warnings.
 525 .sp
 526 .LP
 527 In addition to the context defined above, many \fBfork\fR(2)-\fBexec\fR(2)
 528 model restarters also use the following conventions when invoking executables
 529 as methods:
 530 .sp
 531 .ne 2
 532 .na
 533 \fBArgument array\fR
 534 .ad
 535 .sp .6
 536 .RS 4n
 537 The arguments in \fBargv[]\fR are set consistently with the result \fB/bin/sh
 538 -c\fR of the \fBexec\fR string.
 539 .RE
 540 
 541 .sp
 542 .ne 2
 543 .na
 544 \fBFile descriptors\fR
 545 .ad
 546 .sp .6
 547 .RS 4n
 548 File descriptor \fB0\fR is \fB/dev/null\fR. File descriptors \fB1\fR and
 549 \fB2\fR are recommended to be a per-service log file.
 550 .RE
 551 
 552 .SH FILES
 553 .ne 2
 554 .na
 555 \fB\fB/lib/svc/share/smf_include.sh\fR\fR
 556 .ad
 557 .sp .6
 558 .RS 4n
 559 Definitions of exit status values.
 560 .RE
 561 
 562 .sp
 563 .ne 2
 564 .na
 565 \fB\fB/usr/include/libscf.h\fR\fR
 566 .ad
 567 .sp .6
 568 .RS 4n
 569 Definitions of exit status codes.
 570 .RE
 571 
 572 .SH SEE ALSO
 573 .LP
 574 \fBzonename\fR(1), \fBcoreadm\fR(1M), \fBinetd\fR(1M), \fBsvccfg\fR(1M),
 575 \fBsvc.startd\fR(1M), \fBexec\fR(2), \fBfork\fR(2),
 576 \fBgetdefaultproj\fR(3PROJECT), \fBexec_attr\fR(4), \fBproject\fR(4),
 577 \fBservice_bundle\fR(4), \fBattributes\fR(5), \fBprivileges\fR(5),
 578 \fBrbac\fR(5), \fBsmf\fR(5), \fBsmf_bootstrap\fR(5), \fBzones\fR(5),
 579 \fBsecurity-flags\fR(5)
 580 .SH NOTES
 581 .LP
 582 The present version of \fBsmf\fR(5) does not support multiple repositories.
 583 .sp
 584 .LP
 585 When a service is configured to be started as root but with privileges
 586 different from \fBlimit_privileges\fR, the resulting process is privilege
 587 aware.  This can be surprising to developers who expect \fBseteuid(<non-zero
 588 UID>)\fR to reduce privileges to basic or less.