1 #
2 # CDDL HEADER START
3 #
4 # The contents of this file are subject to the terms of the
5 # Common Development and Distribution License (the "License").
6 # You may not use this file except in compliance with the License.
7 #
8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 # or http://www.opensolaris.org/os/licensing.
10 # See the License for the specific language governing permissions
11 # and limitations under the License.
12 #
13 # When distributing Covered Code, include this CDDL HEADER in each
14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 # If applicable, add the following below this CDDL HEADER, with the
16 # fields enclosed by brackets "[]" replaced with your own identifying
17 # information: Portions Copyright [yyyy] [name of copyright owner]
18 #
19 # CDDL HEADER END
20 #
21 # Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
22 # Copyright 2015 Nexenta Systems, Inc. All rights reserved.
23 # Copyright 2012 Joshua M. Clulow <josh@sysmgr.org>
24 # Copyright 2015, OmniTI Computer Consulting, Inc. All rights reserved.
25 # Copyright 2016 RackTop Systems.
26 #
27
28 # Configuration variables for the runtime environment of the nightly
29 # build script and other tools for construction and packaging of
30 # releases.
31 # This example is suitable for building an illumos workspace, which
32 # will contain the resulting archives. It is based off the onnv
33 # release. It sets NIGHTLY_OPTIONS to make nightly do:
34 # DEBUG build only (-D, -F)
35 # do not bringover from the parent (-n)
36 # runs 'make check' (-C)
37 # checks for new interfaces in libraries (-A)
38 # runs lint in usr/src (-l plus the LINTDIRS variable)
39 # sends mail on completion (-m and the MAILTO variable)
40 # creates packages for PIT/RE (-p)
41 # checks for changes in ELF runpaths (-r)
42 # build and use this workspace's tools in $SRC/tools (-t)
43 #
44 # - This file is sourced by "bldenv.sh" and "nightly.sh" and should not
45 # be executed directly.
46 # - This script is only interpreted by ksh93 and explicitly allows the
47 # use of ksh93 language extensions.
48 #
49 export NIGHTLY_OPTIONS='-FnCDAlmprt'
50
51 # CODEMGR_WS - where is your workspace at
52 #export CODEMGR_WS="$HOME/ws/illumos-gate"
53 export CODEMGR_WS="`git rev-parse --show-toplevel`"
54
55 # Maximum number of dmake jobs. The recommended number is 2 + NCPUS,
56 # where NCPUS is the number of logical CPUs on your build system.
57 function maxjobs
58 {
59 nameref maxjobs=$1
60 integer ncpu
61 integer -r min_mem_per_job=512 # minimum amount of memory for a job
62
63 ncpu=$(builtin getconf ; getconf 'NPROCESSORS_ONLN')
64 (( maxjobs=ncpu + 2 ))
65
66 # Throttle number of parallel jobs launched by dmake to a value which
67 # gurantees that all jobs have enough memory. This was added to avoid
68 # excessive paging/swapping in cases of virtual machine installations
69 # which have lots of CPUs but not enough memory assigned to handle
70 # that many parallel jobs
71 if [[ $(/usr/sbin/prtconf 2>'/dev/null') == ~(E)Memory\ size:\ ([[:digit:]]+)\ Megabytes ]] ; then
72 integer max_jobs_per_memory # parallel jobs which fit into physical memory
73 integer physical_memory # physical memory installed
74
75 # The array ".sh.match" contains the contents of capturing
76 # brackets in the last regex, .sh.match[1] will contain
77 # the value matched by ([[:digit:]]+), i.e. the amount of
78 # memory installed
79 physical_memory="10#${.sh.match[1]}"
80
81 ((
82 max_jobs_per_memory=round(physical_memory/min_mem_per_job) ,
83 maxjobs=fmax(2, fmin(maxjobs, max_jobs_per_memory))
84 ))
85 fi
86
87 return 0
88 }
89
90 maxjobs DMAKE_MAX_JOBS # "DMAKE_MAX_JOBS" passed as ksh(1) name reference
91 export DMAKE_MAX_JOBS
92
93 # path to onbld tool binaries
94 ONBLD_BIN='/opt/onbld/bin'
95
96 # PARENT_WS is used to determine the parent of this workspace. This is
97 # for the options that deal with the parent workspace (such as where the
98 # proto area will go).
99 export PARENT_WS=''
100
101 # CLONE_WS is the workspace nightly should do a bringover from.
102 export CLONE_WS='ssh://anonhg@hg.illumos.org/illumos-gate'
103
104 # The bringover, if any, is done as STAFFER.
105 # Set STAFFER to your own login as gatekeeper or developer
106 # The point is to use group "staff" and avoid referencing the parent
107 # workspace as root.
108 # Some scripts optionally send mail messages to MAILTO.
109 #
110 export STAFFER="$LOGNAME"
111 export MAILTO="$STAFFER"
112
113 # If you wish the mail messages to be From: an arbitrary address, export
114 # MAILFROM.
115 #export MAILFROM="user@example.com"
116
117 # The project (see project(4)) under which to run this build. If not
118 # specified, the build is simply run in a new task in the current project.
119 export BUILD_PROJECT=''
120
121 # You should not need to change the next three lines
122 export ATLOG="$CODEMGR_WS/log"
123 export LOGFILE="$ATLOG/nightly.log"
124 export MACH="$(uname -p)"
125
126 #
127 # The following macro points to the closed binaries. Once illumos has
128 # totally freed itself, we can remove this reference.
129 #
130 # Location of encumbered binaries.
131 export ON_CLOSED_BINS="$CODEMGR_WS/closed"
132
133 # REF_PROTO_LIST - for comparing the list of stuff in your proto area
134 # with. Generally this should be left alone, since you want to see differences
135 # from your parent (the gate).
136 #
137 export REF_PROTO_LIST="$PARENT_WS/usr/src/proto_list_${MACH}"
138
139
140 export ROOT="$CODEMGR_WS/proto/root_${MACH}"
141 export SRC="$CODEMGR_WS/usr/src"
142 export MULTI_PROTO="no"
143
144 #
145 # build environment variables, including version info for mcs, motd,
146 # motd, uname and boot messages. Mostly you shouldn't change this except
147 # when the release slips (nah) or you move an environment file to a new
148 # release
149 #
150 export VERSION="`git describe --long --all HEAD | cut -d/ -f2-`"
151
152 #
153 # the RELEASE and RELEASE_DATE variables are set in Makefile.master;
154 # there might be special reasons to override them here, but that
155 # should not be the case in general
156 #
157 # export RELEASE='5.11'
158 # export RELEASE_DATE='October 2007'
159
160 # proto area in parent for optionally depositing a copy of headers and
161 # libraries corresponding to the protolibs target
162 # not applicable given the NIGHTLY_OPTIONS
163 #
164 export PARENT_ROOT="$PARENT_WS/proto/root_$MACH"
165 export PARENT_TOOLS_ROOT="$PARENT_WS/usr/src/tools/proto/root_$MACH-nd"
166
167 # Package creation variables. You probably shouldn't change these,
168 # either.
169 #
170 # PKGARCHIVE determines where the repository will be created.
171 #
172 # PKGPUBLISHER_REDIST controls the publisher setting for the repository.
173 #
174 export PKGARCHIVE="${CODEMGR_WS}/packages/${MACH}/nightly"
175 # export PKGPUBLISHER_REDIST='on-redist'
176
177 # Package manifest format version.
178 export PKGFMT_OUTPUT='v1'
179
180 # we want make to do as much as it can, just in case there's more than
181 # one problem.
182 export MAKEFLAGS='k'
183
184 # Magic variables to prevent the devpro compilers/teamware from checking
185 # for updates or sending mail back to devpro on every use.
186 export SUNW_NO_UPDATE_NOTIFY='1'
187 export UT_NO_USAGE_TRACKING='1'
188
189 # Build tools - don't change these unless you know what you're doing. These
190 # variables allows you to get the compilers and onbld files locally.
191 # Set BUILD_TOOLS to pull everything from one location.
192 # Alternately, you can set ONBLD_TOOLS to where you keep the contents of
193 # SUNWonbld and SPRO_ROOT to where you keep the compilers. SPRO_VROOT
194 # exists to make it easier to test new versions of the compiler.
195 export BUILD_TOOLS='/opt'
196 #export ONBLD_TOOLS='/opt/onbld'
197 export SPRO_ROOT='/opt/SUNWspro'
198 export SPRO_VROOT="$SPRO_ROOT"
199
200 # Disable shadow compilation by default.
201 export CW_NO_SHADOW='1'
202
203 # This goes along with lint - it is a series of the form "A [y|n]" which
204 # means "go to directory A and run 'make lint'" Then mail me (y) the
205 # difference in the lint output. 'y' should only be used if the area you're
206 # linting is actually lint clean or you'll get lots of mail.
207 # You shouldn't need to change this though.
208 #export LINTDIRS="$SRC y"
209
210 # Set this flag to 'n' to disable the use of 'checkpaths'. The default,
211 # if the 'N' option is not specified, is to run this test.
212 #CHECK_PATHS='y'
213
214 # POST_NIGHTLY can be any command to be run at the end of nightly. See
215 # nightly(1) for interactions between environment variables and this command.
216 #POST_NIGHTLY=
217
218 # Comment this out to disable support for IPP printing, i.e. if you
219 # don't want to bother providing the Apache headers this needs.
220 #export ENABLE_IPP_PRINTING=
221
222 # Comment this out to disable support for SMB printing, i.e. if you
223 # don't want to bother providing the CUPS headers this needs.
224 #export ENABLE_SMB_PRINTING=
225
226 # Comment this out to disable building of 64bit perl modules.
227 # Don't disable this unless instructed to do so by your distributor.
228 export ENABLE_64BIT_PERL=
229
230 # If your distro uses certain versions of Perl, make sure either Makefile.master
231 # contains your new defaults OR your .env file sets them.
232 # These are how you would override for building on OmniOS r151012, for example.
233 #export PERL_VERSION=5.16.1
234 #export PERL_VARIANT=-thread-multi
235 #export PERL_PKGVERS=-5161