1 # 2 # CDDL HEADER START 3 # 4 # The contents of this file are subject to the terms of the 5 # Common Development and Distribution License (the "License"). 6 # You may not use this file except in compliance with the License. 7 # 8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 # or http://www.opensolaris.org/os/licensing. 10 # See the License for the specific language governing permissions 11 # and limitations under the License. 12 # 13 # When distributing Covered Code, include this CDDL HEADER in each 14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 # If applicable, add the following below this CDDL HEADER, with the 16 # fields enclosed by brackets "[]" replaced with your own identifying 17 # information: Portions Copyright [yyyy] [name of copyright owner] 18 # 19 # CDDL HEADER END 20 # 21 # uts/intel/Makefile 22 # 23 # Copyright (c) 1999, 2010, Oracle and/or its affiliates. All rights reserved. 24 # 25 # This makefile drives the production of all implementation architecture 26 # independent modules for Intel processors. 27 28 UTSBASE = .. 29 30 include Makefile.intel 31 32 LINT_KMODS_X1 = $(LINT_KMODS:nsmb=) 33 LINT_KMODS_X2 = $(LINT_KMODS_X1:smbfs=) 34 LINT_KMODLIBS = $(LINT_KMODS_X2:e1000g=) 35 LINT_LIBS = $(LINT_LIB) $(GEN_LINT_LIB) \ 36 $(LINT_KMODLIBS:%=$(LINT_LIB_DIR)/llib-l%.ln) \ 37 $(CLOSED_LINT_KMODS:%=$(LINT_LIB_DIR)/llib-l%.ln) 38 39 # EXPORT DELETE START 40 $(CLOSED_BUILD)LINT_LIBS += $(SVVS_KMODS:%=$(LINT_LIB_DIR)/llib-l%.ln) 41 $(CLOSED_BUILD)LINT_CLOSED_XMOD4 = $(CLOSED_XMODS:bnx=) 42 $(CLOSED_BUILD)LINT_CLOSED_XMOD3 = $(LINT_CLOSED_XMOD4:bnxe=) 43 $(CLOSED_BUILD)LINT_CLOSED_XMOD2 = $(LINT_CLOSED_XMOD3:lsimega=) 44 $(CLOSED_BUILD)LINT_CLOSED_XMOD1 = $(LINT_CLOSED_XMOD2:adpu320=) 45 $(CLOSED_BUILD)LINT_LIBS += $(LINT_XMODLIBS:%=$(LINT_LIB_DIR)/llib-l%.ln) 46 47 # 48 # dprov is delivered in the SUNWcryptoint package. 49 # 50 DRV_KMODS += dprov 51 52 # EXPORT DELETE END 53 54 # 55 # 56 def := TARGET= def 57 def.prereq := TARGET= def 58 all := TARGET= all 59 all.prereq := TARGET= all 60 install := TARGET= install 61 install.prereq := TARGET= all 62 clean := TARGET= clean 63 clobber := TARGET= clobber 64 lint := TARGET= lint 65 lint.prereq := TARGET= lint 66 modlintlib := TARGET= modlintlib 67 modlist := TARGET= modlist 68 modlist := NO_STATE= -K $$MODSTATE$$$$ 69 clean.lint := TARGET= clean.lint 70 check := TARGET= check 71 install_h := TARGET= install_h 72 install_h.prereq := TARGET= install_h 73 74 .KEEP_STATE: 75 76 .PARALLEL: $(PARALLEL_KMODS) $(CLOSED_KMODS) $(SVVS) $(XMODS) \ 77 $(CLOSED_XMODS) config $(LINT_DEPS) 78 79 def all install clean clobber modlist: $(KMODS) $(CLOSED_KMODS) \ 80 $(SVVS) $(XMODS) $(CLOSED_XMODS) config 81 82 83 # 84 # Privilege constants 85 # 86 # NOTE: The rules for generating priv_const.c file are shared between all 87 # processor architectures and and should be kept in sync. If they are changed in 88 # this file make sure that sparc rules are updated as well. 89 # 90 PRIVS_C = $(SRC)/uts/common/os/priv_const.c 91 92 $(PRIVS_C): $(PRIVS_AWK) $(PRIVS_DEF) 93 $(AWK) -f $(PRIVS_AWK) < $(PRIVS_DEF) cfile=$@ 94 95 # 96 # Prerequisites 97 # 98 # The uts/Makefile defines build parallelism for x86 platforms such that i86pc, 99 # i86xpv and intel are all built in parallel. This requires building certain 100 # parts before the parallel build can start. The uts/Makefile appends the 101 # '.prereq' string to the original target and executes this Makefile to build 102 # any prerequisites needed before the full parallel build can start. After that 103 # make continues with normal targets. 104 # 105 # Any build prerequisites for x86 builds should be described here. 106 # 107 # genassym is used to build intel/dtrace and genunix, so it should be built 108 # first. 109 # 110 # priv_const.c is required to build genunix. 111 # 112 # genunix is used by everyone to ctf-merge with. Genunix is CTF-merged with 113 # intel/ip so as a side effect this dependency builds intel/ip as part of the 114 # prerequisites. 115 # 116 # intel/dtrace depends on i86pc/genassym, so we need to build both 117 # i86pc/genassym and intel/genassym. 118 # 119 all.prereq install.prereq def.prereq: genunix FRC 120 @cd ../i86pc/genassym; pwd; $(MAKE) $(@:%.prereq=%) 121 122 # 123 # i86pc lint libraries should be built first 124 # 125 lint.prereq: FRC 126 @cd ../i86pc; pwd; $(MAKE) $(NO_STATE) lint 127 128 # 129 # Nothing to do for any other prerequisite targets. 130 # 131 %.prereq: 132 133 genunix: $(PRIVS_C) 134 135 modlintlib clean.lint: $(LINT_KMODS) $(CLOSED_LINT_KMODS) $(SVVS) \ 136 $(XMODS) $(CLOSED_XMODS) 137 138 $(KMODS) $(SUBDIRS) config: FRC 139 @cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET) 140 141 $(CLOSED_KMODS): FRC 142 cd $(CLOSED)/uts/intel/$@; pwd; $(MAKE) $(NO_STATE) $(TARGET) 143 144 $(XMODS): FRC 145 @if [ -f $@/Makefile ]; then \ 146 cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET); \ 147 else \ 148 true; \ 149 fi 150 151 $(SVVS) $(CLOSED_XMODS): FRC 152 @if [ -f $(CLOSED)/uts/intel/$@/Makefile ]; then \ 153 cd $(CLOSED)/uts/intel/$@; pwd; \ 154 $(MAKE) $(NO_STATE) $(TARGET); \ 155 else \ 156 true; \ 157 fi 158 159 install_h check: FRC 160 @cd sys; pwd; $(MAKE) $(TARGET) 161 @cd asm; pwd; $(MAKE) $(TARGET) 162 @cd ia32/sys; pwd; $(MAKE) $(TARGET) 163 @cd amd64/sys; pwd; $(MAKE) $(TARGET) 164 165 # 166 # Work-around to disable acpica global crosscheck lint warnings 167 # 168 LGREP.intel = grep -v 'intel/io/acpica' 169 170 # 171 # Full kernel lint target. 172 # 173 LINT_TARGET = globallint 174 175 # workaround for multiply defined errors 176 globallint := LINTFLAGS += -erroff=E_NAME_MULTIPLY_DEF2 177 178 globallint: 179 @pwd 180 @-$(ECHO) "\nFULL KERNEL: global crosschecks:" 181 @-$(LINT) $(LINTFLAGS) $(LINT_LIBS) 2>&1 | $(LGREP.intel) | $(LGREP.2) 182 183 lint: modlintlib .WAIT $(LINT_DEPS) 184 185 # EXPORT DELETE START 186 187 EXPORT_SRC: 188 $(RM) Makefile+ 189 sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \ 190 < Makefile > Makefile+ 191 $(MV) Makefile+ Makefile 192 $(CHMOD) 444 Makefile 193 194 # EXPORT DELETE END 195 196 include ../Makefile.targ