1 #!/bin/sh
2 #
3 # CDDL HEADER START
4 #
5 # The contents of this file are subject to the terms of the
6 # Common Development and Distribution License (the "License").
7 # You may not use this file except in compliance with the License.
8 #
9 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10 # or http://www.opensolaris.org/os/licensing.
11 # See the License for the specific language governing permissions
12 # and limitations under the License.
13 #
14 # When distributing Covered Code, include this CDDL HEADER in each
15 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16 # If applicable, add the following below this CDDL HEADER, with the
17 # fields enclosed by brackets "[]" replaced with your own identifying
18 # information: Portions Copyright [yyyy] [name of copyright owner]
19 #
20 # CDDL HEADER END
21 #
22 #
23 # idsconfig -- script to setup iDS 5.x/6.x/7.x for Native LDAP II.
24 #
25 # Copyright (c) 2001, 2010, Oracle and/or its affiliates. All rights reserved.
26 #
27
28 #
29 # display_msg(): Displays message corresponding to the tag passed in.
30 #
31 display_msg()
32 {
33 case "$1" in
34 usage) cat <<EOF
35 $PROG: [ -v ] [ -i input file ] [ -o output file ]
36 i <input file> Get setup info from input file.
37 o <output file> Generate a server configuration output file.
38 v Verbose mode
39 EOF
40 ;;
41 backup_server) cat <<EOF
42 It is strongly recommended that you BACKUP the directory server
43 before running $PROG.
44
45 Hit Ctrl-C at any time before the final confirmation to exit.
46
47 EOF
48 ;;
49 setup_complete) cat <<EOF
50
51 $PROG: Setup of iDS server ${IDS_SERVER} is complete.
52
53 EOF
54 ;;
55 display_vlv_list) cat <<EOF
56
57 Note: idsconfig has created entries for VLV indexes.
58
59 For DS5.x, use the directoryserver(1m) script on ${IDS_SERVER}
60 to stop the server. Then, using directoryserver, follow the
61 directoryserver examples below to create the actual VLV indexes.
62
63 For DS6.x or later, use dsadm command delivered with DS on ${IDS_SERVER}
64 to stop the server. Then, using dsadm, follow the
65 dsadm examples below to create the actual VLV indexes.
66
67 EOF
68 ;;
69 cred_level_menu) cat <<EOF
70 The following are the supported credential levels:
71 1 anonymous
72 2 proxy
73 3 proxy anonymous
74 4 self
75 EOF
76 ;;
77 auth_method_menu) cat <<EOF
78 The following are the supported Authentication Methods:
79 1 none
80 2 simple
81 3 sasl/DIGEST-MD5
82 4 tls:simple
83 5 tls:sasl/DIGEST-MD5
84 6 sasl/GSSAPI
85 EOF
86 ;;
87 srvauth_method_menu) cat <<EOF
88 The following are the supported Authentication Methods:
89 1 simple
90 2 sasl/DIGEST-MD5
91 3 tls:simple
92 4 tls:sasl/DIGEST-MD5
93 5 sasl/GSSAPI
94 EOF
95 ;;
96 prompt_ssd_menu) cat <<EOF
97 A Add a Service Search Descriptor
98 D Delete a SSD
99 M Modify a SSD
100 P Display all SSD's
101 H Help
102 X Clear all SSD's
103
104 Q Exit menu
105 EOF
106 ;;
107 summary_menu)
108
109 SUFFIX_INFO=
110 DB_INFO=
111
112 [ -n "${NEED_CREATE_SUFFIX}" ] &&
113 {
114 SUFFIX_INFO=`cat <<EOF
115
116 Suffix to create : $LDAP_SUFFIX
117 EOF
118 `
119 [ -n "${NEED_CREATE_BACKEND}" ] &&
120 DB_INFO=`cat <<EOF
121
122 Database to create : $IDS_DATABASE
123 EOF
124 `
125 }
126
127 cat <<EOF
128 Summary of Configuration
129
130 1 Domain to serve : $LDAP_DOMAIN
131 2 Base DN to setup : $LDAP_BASEDN$SUFFIX_INFO$DB_INFO
132 3 Profile name to create : $LDAP_PROFILE_NAME
133 4 Default Server List : $LDAP_SERVER_LIST
134 5 Preferred Server List : $LDAP_PREF_SRVLIST
135 6 Default Search Scope : $LDAP_SEARCH_SCOPE
136 7 Credential Level : $LDAP_CRED_LEVEL
137 8 Authentication Method : $LDAP_AUTHMETHOD
138 9 Enable Follow Referrals : $LDAP_FOLLOWREF
139 10 iDS Time Limit : $IDS_TIMELIMIT
140 11 iDS Size Limit : $IDS_SIZELIMIT
141 12 Enable crypt password storage : $NEED_CRYPT
142 13 Service Auth Method pam_ldap : $LDAP_SRV_AUTHMETHOD_PAM
143 14 Service Auth Method keyserv : $LDAP_SRV_AUTHMETHOD_KEY
144 15 Service Auth Method passwd-cmd: $LDAP_SRV_AUTHMETHOD_CMD
145 16 Search Time Limit : $LDAP_SEARCH_TIME_LIMIT
146 17 Profile Time to Live : $LDAP_PROFILE_TTL
147 18 Bind Limit : $LDAP_BIND_LIMIT
148 19 Enable shadow update : $LDAP_ENABLE_SHADOW_UPDATE
149 20 Service Search Descriptors Menu
150
151 EOF
152 ;;
153 sfx_not_suitable) cat <<EOF
154
155 Sorry, suffix ${LDAP_SUFFIX} is not suitable for Base DN ${LDAP_BASEDN}
156
157 EOF
158 ;;
159 obj_not_found) cat <<EOF
160
161 Sorry, ${PROG} can't find an objectclass for "$_ATT" attribute
162
163 EOF
164 ;;
165 sfx_config_incons) cat <<EOF
166
167 Sorry, there is no suffix mapping for ${LDAP_SUFFIX},
168 while ldbm database exists, server configuration needs to be fixed manually,
169 look at cn=mapping tree,cn=config and cn=ldbm database,cn=plugins,cn=config
170
171 EOF
172 ;;
173 ldbm_db_exist) cat <<EOF
174
175 Database "${IDS_DATABASE}" already exists,
176 however "${IDS_DATABASE_AVAIL}" name is available
177
178 EOF
179 ;;
180 unable_find_db_name) cat <<EOF
181
182 Unable to find any available database name close to "${IDS_DATABASE}"
183
184 EOF
185 ;;
186 create_ldbm_db_error) cat <<EOF
187
188 ERROR: unable to create suffix ${LDAP_SUFFIX}
189 due to server error that occurred during creation of ldbm database
190
191 EOF
192 ;;
193 create_suffix_entry_error) cat <<EOF
194
195 ERROR: unable to create entry ${LDAP_SUFFIX} of ${LDAP_SUFFIX_OBJ} class
196
197 EOF
198 ;;
199 ldap_suffix_list) cat <<EOF
200
201 No valid suffixes (naming contexts) were found for LDAP base DN:
202 ${LDAP_BASEDN}
203
204 Available suffixes are:
205 ${LDAP_SUFFIX_LIST}
206
207 EOF
208 ;;
209 sorry) cat <<EOF
210
211 HELP - No help is available for this topic.
212
213 EOF
214 ;;
215 create_suffix_help) cat <<EOF
216
217 HELP - Our Base DN is ${LDAP_BASEDN}
218 and we need to create a Directory Suffix,
219 which can be equal to Base DN itself or be any of Base DN parents.
220 All intermediate entries up to suffix will be created on demand.
221
222 EOF
223 ;;
224 enter_ldbm_db_help) cat <<EOF
225
226 HELP - ldbm database is an internal database for storage of our suffix data.
227 Database name must be alphanumeric due to Directory Server restriction.
228
229 EOF
230 ;;
231 backup_help) cat <<EOF
232
233 HELP - Since idsconfig modifies the directory server configuration,
234 it is strongly recommended that you backup the server prior
235 to running this utility. This is especially true if the server
236 being configured is a production server.
237
238 EOF
239 ;;
240 port_help) cat <<EOF
241
242 HELP - Enter the port number the directory server is configured to
243 use for LDAP.
244
245 EOF
246 ;;
247 domain_help) cat <<EOF
248
249 HELP - This is the DNS domain name this server will be serving. You
250 must provide this name even if the server is not going to be populated
251 with hostnames. Any unqualified hostname stored in the directory
252 will be fully qualified using this DNS domain name.
253
254 EOF
255 ;;
256 basedn_help) cat <<EOF
257
258 HELP - This parameter defines the default location in the directory tree for
259 the naming services entries. You can override this default by using
260 serviceSearchDescriptors (SSD). You will be given the option to set up
261 an SSD later on in the setup.
262
263 EOF
264 ;;
265 profile_help) cat <<EOF
266
267 HELP - Name of the configuration profile with which the clients will be
268 configured. A directory server can store various profiles for multiple
269 groups of clients. The initialization tool, (ldapclient(1M)), assumes
270 "default" unless another is specified.
271
272 EOF
273 ;;
274 def_srvlist_help) cat <<EOF
275
276 HELP - Provide a list of directory servers to serve clients using this profile.
277 All these servers should contain consistent data and provide similar
278 functionality. This list is not ordered, and clients might change the
279 order given in this list. Note that this is a space separated list of
280 *IP addresses* (not host names). Providing port numbers is optional.
281
282 EOF
283 ;;
284 pref_srvlist_help) cat <<EOF
285
286 HELP - Provide a list of directory servers to serve this client profile.
287 Unlike the default server list, which is not ordered, the preferred
288 servers must be entered IN THE ORDER you wish to have them contacted.
289 If you do specify a preferred server list, clients will always contact
290 them before attempting to contact any of the servers on the default
291 server list. Note that you must enter the preferred server list as a
292 space-separated list of *IP addresses* (not host names). Providing port
293 numbers is optional.
294
295 EOF
296 ;;
297 srch_scope_help) cat <<EOF
298
299 HELP - Default search scope to be used for all searches unless they are
300 overwritten using serviceSearchDescriptors. The valid options
301 are "one", which would specify the search will only be performed
302 at the base DN for the given service, or "sub", which would specify
303 the search will be performed through *all* levels below the base DN
304 for the given service.
305
306 EOF
307 ;;
308 cred_lvl_help) cat <<EOF
309
310 HELP - This parameter defines what credentials the clients use to
311 authenticate to the directory server. This list might contain
312 multiple credential levels and is ordered. If a proxy level
313 is configured, you will also be prompted to enter a bind DN
314 for the proxy agent along with a password. This proxy agent
315 will be created if it does not exist.
316
317 EOF
318 ;;
319 auth_help) cat <<EOF
320
321 HELP - The default authentication method(s) to be used by all services
322 in the client using this profile. This is a ordered list of
323 authentication methods separated by a ';'. The supported methods
324 are provided in a menu. Note that sasl/DIGEST-MD5 binds require
325 passwords to be stored un-encrypted on the server.
326
327 EOF
328 ;;
329 srvauth_help) cat <<EOF
330
331 HELP - The authentication methods to be used by a given service. Currently
332 3 services support this feature: pam_ldap, keyserv, and passwd-cmd.
333 The authentication method specified in this attribute overrides
334 the default authentication method defined in the profile. This
335 feature can be used to select stronger authentication methods for
336 services which require increased security.
337
338 EOF
339 ;;
340 pam_ldap_help) cat <<EOF
341
342 HELP - The authentication method(s) to be used by pam_ldap when contacting
343 the directory server. This is a ordered list, and, if provided, will
344 override the default authentication method parameter.
345
346 EOF
347 ;;
348 keyserv_help) cat <<EOF
349
350 HELP - The authentication method(s) to be used by newkey(1M) and chkey(1)
351 when contacting the directory server. This is a ordered list and
352 if provided will override the default authentication method
353 parameter.
354
355 EOF
356 ;;
357 passwd-cmd_help) cat <<EOF
358
359 HELP - The authentication method(s) to be used by passwd(1) command when
360 contacting the directory server. This is a ordered list and if
361 provided will override the default authentication method parameter.
362
363 EOF
364 ;;
365 referrals_help) cat <<EOF
366
367 HELP - This parameter indicates whether the client should follow
368 ldap referrals if it encounters one during naming lookups.
369
370 EOF
371 ;;
372 tlim_help) cat <<EOF
373
374 HELP - The server time limit value indicates the maximum amount of time the
375 server would spend on a query from the client before abandoning it.
376 A value of '-1' indicates no limit.
377
378 EOF
379 ;;
380 slim_help) cat <<EOF
381
382 HELP - The server sizelimit value indicates the maximum number of entries
383 the server would return in respond to a query from the client. A
384 value of '-1' indicates no limit.
385
386 EOF
387 ;;
388 crypt_help) cat <<EOF
389
390 HELP - By default iDS does not store userPassword attribute values using
391 unix "crypt" format. If you need to keep your passwords in the crypt
392 format for NIS/NIS+ and pam_unix compatibility, choose 'yes'. If
393 passwords are stored using any other format than crypt, pam_ldap
394 MUST be used by clients to authenticate users to the system. Note
395 that if you wish to use sasl/DIGEST-MD5 in conjunction with pam_ldap,
396 user passwords must be stored in the clear format.
397
398 EOF
399 ;;
400 srchtime_help) cat <<EOF
401
402 HELP - The search time limit the client will enforce for directory
403 lookups.
404
405 EOF
406 ;;
407 profttl_help) cat <<EOF
408
409 HELP - The time to live value for profile. The client will refresh its
410 cached version of the configuration profile at this TTL interval.
411
412 EOF
413 ;;
414 bindlim_help) cat <<EOF
415
416 HELP - The time limit for the bind operation to the directory. This
417 value controls the responsiveness of the client in case a server
418 becomes unavailable. The smallest timeout value for a given
419 network architecture/conditions would work best. This is very
420 similar to setting TCP timeout, but only for LDAP bind operation.
421
422 EOF
423 ;;
424 ssd_help) cat <<EOF
425
426 HELP - Using Service Search Descriptors (SSD), you can override the
427 default configuration for a given service. The SSD can be
428 used to override the default search base DN, the default search
429 scope, and the default search filter to be used for directory
430 lookups. SSD are supported for all services (databases)
431 defined in nsswitch.conf(4). The default base DN is defined
432 in ldap(1).
433
434 Note: SSD are powerful tools in defining configuration profiles
435 and provide a great deal of flexibility. However, care
436 must be taken in creating them. If you decide to make use
437 of SSDs, consult the documentation first.
438
439 EOF
440 ;;
441 ssd_menu_help) cat <<EOF
442
443 HELP - Using this menu SSD can be added, updated, or deleted from
444 the profile.
445
446 A - This option creates a new SSD by prompting for the
447 service name, base DN, and scope. Service name is
448 any valid service as defined in ldap(1). base is
449 either the distinguished name to the container where
450 this service will use, or a relative DN followed
451 by a ','.
452 D - Delete a previously created SSD.
453 M - Modify a previously created SSD.
454 P - Display a list of all the previously created SSD.
455 X - Delete all of the previously created SSD.
456
457 Q - Exit the menu and continue with the server configuration.
458
459 EOF
460 ;;
461 ldap_suffix_list_help) cat <<EOF
462
463 HELP - No valid suffixes (naming contexts) are available on server
464 ${IDS_SERVER}:${IDS_PORT}.
465 You must set an LDAP Base DN that can be contained in
466 an existing suffix.
467
468 EOF
469 ;;
470 enable_shadow_update_help) cat <<EOF
471
472 HELP - Enter 'y' to set up the LDAP server for shadow update.
473 The setup will add an administrator identity/credential
474 and modify the necessary access controls for the client
475 to update shadow(4) data on the LDAP server. If sasl/GSSAPI
476 is in use, the Kerberos host principal will be used as the
477 administrator identity.
478
479 Shadow data is used for password aging and account locking.
480 Please refer to the shadow(4) manual page for details.
481
482 EOF
483 ;;
484 add_admin_cred_help) cat <<EOF
485
486 HELP - Start the setup to add an administrator identity/credential
487 and to modify access controls for the client to update
488 shadow(4) data on the LDAP server.
489
490 Shadow data is used for password aging and account locking.
491 Please refer to the shadow(4) manual page for details.
492
493 EOF
494 ;;
495 use_host_principal_help) cat <<EOF
496
497 HELP - A profile with a 'sasl/GSSAPI' authentication method and a 'self'
498 credential level is detected, enter 'y' to modify the necessary
499 access controls for allowing the client to update shadow(4) data
500 on the LDAP server.
501
502 Shadow data is used for password aging and account locking.
503 Please refer to the shadow(4) manual page for details.
504
505 EOF
506 ;;
507 esac
508 }
509
510
511 #
512 # get_ans(): gets an answer from the user.
513 # $1 instruction/comment/description/question
514 # $2 default value
515 #
516 get_ans()
517 {
518 if [ -z "$2" ]
519 then
520 ${ECHO} "$1 \c"
521 else
522 ${ECHO} "$1 [$2] \c"
523 fi
524
525 read ANS
526 if [ -z "$ANS" ]
527 then
528 ANS=$2
529 fi
530 }
531
532
533 #
534 # get_ans_req(): gets an answer (required) from the user, NULL value not allowed.
535 # $@ instruction/comment/description/question
536 #
537 get_ans_req()
538 {
539 ANS="" # Set ANS to NULL.
540 while [ "$ANS" = "" ]
541 do
542 get_ans "$@"
543 [ "$ANS" = "" ] && ${ECHO} "NULL value not allowed!"
544 done
545 }
546
547
548 #
549 # get_number(): Querys and verifies that number entered is numeric.
550 # Function will repeat prompt user for number value.
551 # $1 Message text.
552 # $2 default value.
553 # $3 Help argument.
554 #
555 get_number()
556 {
557 ANS="" # Set ANS to NULL.
558 NUM=""
559
560 get_ans "$1" "$2"
561
562 # Verify that value is numeric.
563 while not_numeric $ANS
564 do
565 case "$ANS" in
566 [Hh] | help | Help | \?) display_msg ${3:-sorry} ;;
567 * ) ${ECHO} "Invalid value: \"${ANS}\". \c"
568 ;;
569 esac
570 # Get a new value.
571 get_ans "Enter a numeric value:" "$2"
572 done
573 NUM=$ANS
574 }
575
576
577 #
578 # get_negone_num(): Only allows a -1 or positive integer.
579 # Used for values where -1 has special meaning.
580 #
581 # $1 - Prompt message.
582 # $2 - Default value (require).
583 # $3 - Optional help argument.
584 get_negone_num()
585 {
586 while :
587 do
588 get_number "$1" "$2" "$3"
589 if is_negative $ANS
590 then
591 if [ "$ANS" = "-1" ]; then
592 break # -1 is OK, so break.
593 else # Need to re-enter number.
594 ${ECHO} "Invalid number: please enter -1 or positive number."
595 fi
596 else
597 break # Positive number
598 fi
599 done
600 }
601
602
603 #
604 # get_passwd(): Reads a password from the user and verify with second.
605 # $@ instruction/comment/description/question
606 #
607 get_passwd()
608 {
609 [ $DEBUG -eq 1 ] && ${ECHO} "In get_passwd()"
610
611 # Temporary PASSWD variables
612 _PASS1=""
613 _PASS2=""
614
615 /usr/bin/stty -echo # Turn echo OFF
616
617 # Endless loop that continues until passwd and re-entered passwd
618 # match.
619 while :
620 do
621 ANS="" # Set ANS to NULL.
622
623 # Don't allow NULL for first try.
624 while [ "$ANS" = "" ]
625 do
626 get_ans "$@"
627 [ "$ANS" = "" ] && ${ECHO} "" && ${ECHO} "NULL passwd not allowed!"
628 done
629 _PASS1=$ANS # Store first try.
630
631 # Get second try.
632 ${ECHO} ""
633 get_ans "Re-enter passwd:"
634 _PASS2=$ANS
635
636 # Test if passwords are identical.
637 if [ "$_PASS1" = "$_PASS2" ]; then
638 break
639 fi
640
641 # Move cursor down to next line and print ERROR message.
642 ${ECHO} ""
643 ${ECHO} "ERROR: passwords don't match; try again."
644 done
645
646 /usr/bin/stty echo # Turn echo ON
647
648 ${ECHO} ""
649 }
650
651
652 #
653 # get_passwd_nochk(): Reads a password from the user w/o check.
654 # $@ instruction/comment/description/question
655 #
656 get_passwd_nochk()
657 {
658 [ $DEBUG -eq 1 ] && ${ECHO} "In get_passwd_nochk()"
659
660 /usr/bin/stty -echo # Turn echo OFF
661
662 get_ans "$@"
663
664 /usr/bin/stty echo # Turn echo ON
665
666 ${ECHO} ""
667 }
668
669
670 #
671 # get_menu_choice(): Get a menu choice from user. Continue prompting
672 # till the choice is in required range.
673 # $1 .. Message text.
674 # $2 .. min value
675 # $3 .. max value
676 # $4 .. OPTIONAL: default value
677 #
678 # Return value:
679 # MN_CH will contain the value selected.
680 #
681 get_menu_choice()
682 {
683 # Check for req parameter.
684 if [ $# -lt 3 ]; then
685 ${ECHO} "get_menu_choice(): Did not get required parameters."
686 return 1
687 fi
688
689 while :
690 do
691 get_ans "$1" "$4"
692 MN_CH=$ANS
693 is_negative $MN_CH
694 if [ $? -eq 1 ]; then
695 if [ $MN_CH -ge $2 ]; then
696 if [ $MN_CH -le $3 ]; then
697 return
698 fi
699 fi
700 fi
701 ${ECHO} "Invalid choice: $MN_CH"
702 done
703 }
704
705
706 #
707 # get_confirm(): Get confirmation from the user. (Y/Yes or N/No)
708 # $1 - Message
709 # $2 - default value.
710 #
711 get_confirm()
712 {
713 _ANSWER=
714
715 while :
716 do
717 # Display Internal ERROR if $2 not set.
718 if [ -z "$2" ]
719 then
720 ${ECHO} "INTERNAL ERROR: get_confirm requires 2 args, 3rd is optional."
721 exit 2
722 fi
723
724 # Display prompt.
725 ${ECHO} "$1 [$2] \c"
726
727 # Get the ANSWER.
728 read _ANSWER
729 if [ "$_ANSWER" = "" ] && [ -n "$2" ] ; then
730 _ANSWER=$2
731 fi
732 case "$_ANSWER" in
733 [Yy] | yes | Yes | YES) return 1 ;;
734 [Nn] | no | No | NO) return 0 ;;
735 [Hh] | help | Help | \?) display_msg ${3:-sorry};;
736 * ) ${ECHO} "Please enter y or n." ;;
737 esac
738 done
739 }
740
741
742 #
743 # get_confirm_nodef(): Get confirmation from the user. (Y/Yes or N/No)
744 # No default value supported.
745 #
746 get_confirm_nodef()
747 {
748 _ANSWER=
749
750 while :
751 do
752 ${ECHO} "$@ \c"
753 read _ANSWER
754 case "$_ANSWER" in
755 [Yy] | yes | Yes | YES) return 1 ;;
756 [Nn] | no | No | NO) return 0 ;;
757 * ) ${ECHO} "Please enter y or n." ;;
758 esac
759 done
760 }
761
762
763 #
764 # is_numeric(): Tells is a string is numeric.
765 # 0 = Numeric
766 # 1 = NOT Numeric
767 #
768 is_numeric()
769 {
770 # Check for parameter.
771 if [ $# -ne 1 ]; then
772 return 1
773 fi
774
775 # Determine if numeric.
776 expr "$1" + 1 > /dev/null 2>&1
777 if [ $? -ge 2 ]; then
778 return 1
779 fi
780
781 # Made it here, it's Numeric.
782 return 0
783 }
784
785
786 #
787 # not_numeric(): Reverses the return values of is_numeric. Useful
788 # for if and while statements that want to test for
789 # non-numeric data.
790 # 0 = NOT Numeric
791 # 1 = Numeric
792 #
793 not_numeric()
794 {
795 is_numeric $1
796 if [ $? -eq 0 ]; then
797 return 1
798 else
799 return 0
800 fi
801 }
802
803
804 #
805 # is_negative(): Tells is a Numeric value is less than zero.
806 # 0 = Negative Numeric
807 # 1 = Positive Numeric
808 # 2 = NOT Numeric
809 #
810 is_negative()
811 {
812 # Check for parameter.
813 if [ $# -ne 1 ]; then
814 return 1
815 fi
816
817 # Determine if numeric. Can't use expr because -0 is
818 # considered positive??
819 if is_numeric $1; then
820 case "$1" in
821 -*) return 0 ;; # Negative Numeric
822 *) return 1 ;; # Positive Numeric
823 esac
824 else
825 return 2
826 fi
827 }
828
829
830 #
831 # check_domainname(): check validity of a domain name. Currently we check
832 # that it has at least two components.
833 # $1 the domain name to be checked
834 #
835 check_domainname()
836 {
837 if [ ! -z "$1" ]
838 then
839 t=`expr "$1" : '[^.]\{1,\}[.][^.]\{1,\}'`
840 if [ "$t" = 0 ]
841 then
842 return 1
843 fi
844 fi
845 return 0
846 }
847
848
849 #
850 # check_baseDN(): check validity of the baseDN name.
851 # $1 the baseDN name to be checked
852 #
853 # NOTE: The check_baseDN function does not catch all invalid DN's.
854 # Its purpose is to reduce the number of invalid DN's to
855 # get past the input routine. The invalid DN's will be
856 # caught by the LDAP server when they are attempted to be
857 # created.
858 #
859 check_baseDN()
860 {
861 ck_DN=$1
862 ${ECHO} " Checking LDAP Base DN ..."
863 if [ ! -z "$ck_DN" ]; then
864 [ $DEBUG -eq 1 ] && ${ECHO} "Checking baseDN: $ck_DN"
865 # Check for = (assignment operator)
866 ${ECHO} "$ck_DN" | ${GREP} "=" > /dev/null 2>&1
867 if [ $? -ne 0 ]; then
868 [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: No '=' in baseDN."
869 return 1
870 fi
871
872 # Check all keys.
873 while :
874 do
875 # Get first key.
876 dkey=`${ECHO} $ck_DN | cut -d'=' -f1`
877
878 # Check that the key string is valid
879 check_attrName $dkey
880 if [ $? -ne 0 ]; then
881 [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: invalid key=${dkey}"
882 return 1
883 fi
884
885 [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: valid key=${dkey}"
886
887 # Remove first key from DN
888 ck_DN=`${ECHO} $ck_DN | cut -s -d',' -f2-`
889
890 # Break loop if nothing left.
891 if [ "$ck_DN" = "" ]; then
892 break
893 fi
894 done
895 fi
896 return 0
897 }
898
899
900 #
901 # domain_2_dc(): Convert a domain name into dc string.
902 # $1 .. Domain name.
903 #
904 domain_2_dc()
905 {
906 _DOM=$1 # Domain parameter.
907 _DOM_2_DC="" # Return value from function.
908 _FIRST=1 # Flag for first time.
909
910 export _DOM_2_DC # Make visible for others.
911
912 # Convert "."'s to spaces for "for" loop.
913 domtmp="`${ECHO} ${_DOM} | tr '.' ' '`"
914 for i in $domtmp; do
915 if [ $_FIRST -eq 1 ]; then
916 _DOM_2_DC="dc=${i}"
917 _FIRST=0
918 else
919 _DOM_2_DC="${_DOM_2_DC},dc=${i}"
920 fi
921 done
922 }
923
924
925 #
926 # is_root_user(): Check to see if logged in as root user.
927 #
928 is_root_user()
929 {
930 case `id` in
931 uid=0\(root\)*) return 0 ;;
932 * ) return 1 ;;
933 esac
934 }
935
936
937 #
938 # parse_arg(): Parses the command line arguments and sets the
939 # appropriate variables.
940 #
941 parse_arg()
942 {
943 while getopts "dvhi:o:" ARG
944 do
945 case $ARG in
946 d) DEBUG=1;;
947 v) VERB="";;
948 i) INPUT_FILE=$OPTARG;;
949 o) OUTPUT_FILE=$OPTARG;;
950 \?) display_msg usage
951 exit 1;;
952 *) ${ECHO} "**ERROR: Supported option missing handler!"
953 display_msg usage
954 exit 1;;
955 esac
956 done
957 return `expr $OPTIND - 1`
958 }
959
960
961 #
962 # init(): initializes variables and options
963 #
964 init()
965 {
966 # General variables.
967 PROG=`basename $0` # Program name
968 PID=$$ # Program ID
969 VERB='> /dev/null 2>&1' # NULL or "> /dev/null"
970 ECHO="/bin/echo" # print message on screen
971 EVAL="eval" # eval or echo
972 EGREP="/usr/bin/egrep"
973 GREP="/usr/bin/grep"
974 DEBUG=0 # Set Debug OFF
975 BACKUP=no_ldap # backup suffix
976 HOST="" # NULL or <hostname>
977 AWK="/usr/xpg4/bin/awk"
978 RM="/usr/bin/rm"
979 WC="/usr/bin/wc"
980 CAT="/usr/bin/cat"
981 SED="/usr/bin/sed"
982 MV="/usr/bin/mv"
983
984 DOM="" # Set to NULL
985 # If DNS domain (resolv.conf) exists use that, otherwise use domainname.
986 if [ -f /etc/resolv.conf ]; then
987 DOM=`/usr/xpg4/bin/grep -i -E '^domain|^search' /etc/resolv.conf \
988 | awk '{ print $2 }' | tail -1`
989 fi
990
991 # If for any reason the DOM did not get set (error'd resolv.conf) set
992 # DOM to the domainname command's output.
993 if [ "$DOM" = "" ]; then
994 DOM=`domainname` # domain from domainname command.
995 fi
996
997 STEP=1
998 INTERACTIVE=1 # 0 = on, 1 = off (For input file mode)
999 DEL_OLD_PROFILE=0 # 0 (default), 1 = delete old profile.
1000
1001 # idsconfig specific variables.
1002 INPUT_FILE=""
1003 OUTPUT_FILE=""
1004 LDAP_ENABLE_SHADOW_UPDATE="FALSE"
1005 NEED_PROXY=0 # 0 = No Proxy, 1 = Create Proxy.
1006 NEED_ADMIN=0 # 0 = No Admin, 1 = Create Admin.
1007 NEED_HOSTACL=0 # 0 = No Host ACL, 1 = Create Host ACL.
1008 EXISTING_PROFILE=0
1009 LDAP_PROXYAGENT=""
1010 LDAP_ADMINDN=""
1011 LDAP_SUFFIX=""
1012 LDAP_DOMAIN=$DOM # domainname on Server (default value)
1013 GEN_CMD=""
1014 PROXY_ACI_NAME="LDAP_Naming_Services_proxy_password_read"
1015
1016 # LDAP COMMANDS
1017 LDAPSEARCH="/bin/ldapsearch -r"
1018 LDAPMODIFY=/bin/ldapmodify
1019 LDAPADD=/bin/ldapadd
1020 LDAPDELETE=/bin/ldapdelete
1021 LDAP_GEN_PROFILE=/usr/sbin/ldap_gen_profile
1022
1023 # iDS specific information
1024 IDS_SERVER=""
1025 IDS_PORT=389
1026 NEED_TIME=0
1027 NEED_SIZE=0
1028 NEED_SRVAUTH_PAM=0
1029 NEED_SRVAUTH_KEY=0
1030 NEED_SRVAUTH_CMD=0
1031 IDS_TIMELIMIT=""
1032 IDS_SIZELIMIT=""
1033
1034 # LDAP PROFILE related defaults
1035 LDAP_ROOTDN="cn=Directory Manager" # Provide common default.
1036 LDAP_ROOTPWD="" # NULL passwd as default (i.e. invalid)
1037 LDAP_PROFILE_NAME="default"
1038 LDAP_BASEDN=""
1039 LDAP_SERVER_LIST=""
1040 LDAP_AUTHMETHOD=""
1041 LDAP_FOLLOWREF="FALSE"
1042 NEED_CRYPT=""
1043 LDAP_SEARCH_SCOPE="one"
1044 LDAP_SRV_AUTHMETHOD_PAM=""
1045 LDAP_SRV_AUTHMETHOD_KEY=""
1046 LDAP_SRV_AUTHMETHOD_CMD=""
1047 LDAP_SEARCH_TIME_LIMIT=30
1048 LDAP_PREF_SRVLIST=""
1049 LDAP_PROFILE_TTL=43200
1050 LDAP_CRED_LEVEL="proxy"
1051 LDAP_BIND_LIMIT=10
1052
1053 # Prevent new files from being read by group or others.
1054 umask 077
1055
1056 # Service Search Descriptors
1057 LDAP_SERV_SRCH_DES=""
1058
1059 # Set and create TMPDIR.
1060 TMPDIR="/tmp/idsconfig.${PID}"
1061 if mkdir -m 700 ${TMPDIR}
1062 then
1063 # Cleanup on exit.
1064 trap 'rm -rf ${TMPDIR}; /usr/bin/stty echo; exit' 1 2 3 6 15
1065 else
1066 echo "ERROR: unable to create a safe temporary directory."
1067 exit 1
1068 fi
1069 LDAP_ROOTPWF=${TMPDIR}/rootPWD
1070
1071 # Set the SSD file name after setting TMPDIR.
1072 SSD_FILE=${TMPDIR}/ssd_list
1073
1074 # GSSAPI setup
1075 GSSAPI_ENABLE=0
1076 LDAP_KRB_REALM=""
1077 SCHEMA_UPDATED=0
1078
1079 export DEBUG VERB ECHO EVAL EGREP GREP STEP TMPDIR
1080 export IDS_SERVER IDS_PORT LDAP_ROOTDN LDAP_ROOTPWD LDAP_SERVER_LIST
1081 export LDAP_BASEDN LDAP_ROOTPWF
1082 export LDAP_DOMAIN LDAP_SUFFIX LDAP_PROXYAGENT LDAP_PROXYAGENT_CRED
1083 export NEED_PROXY
1084 export LDAP_ENABLE_SHADOW_UPDATE LDAP_ADMINDN LDAP_ADMIN_CRED
1085 export NEED_ADMIN NEED_HOSTACL EXISTING_PROFILE
1086 export LDAP_PROFILE_NAME LDAP_BASEDN LDAP_SERVER_LIST
1087 export LDAP_AUTHMETHOD LDAP_FOLLOWREF LDAP_SEARCH_SCOPE LDAP_SEARCH_TIME_LIMIT
1088 export LDAP_PREF_SRVLIST LDAP_PROFILE_TTL LDAP_CRED_LEVEL LDAP_BIND_LIMIT
1089 export NEED_SRVAUTH_PAM NEED_SRVAUTH_KEY NEED_SRVAUTH_CMD
1090 export LDAP_SRV_AUTHMETHOD_PAM LDAP_SRV_AUTHMETHOD_KEY LDAP_SRV_AUTHMETHOD_CMD
1091 export LDAP_SERV_SRCH_DES SSD_FILE
1092 export GEN_CMD GSSAPI_ENABLE LDAP_KRB_REALM SCHEMA_UPDATED
1093 }
1094
1095
1096 #
1097 # disp_full_debug(): List of all debug variables usually interested in.
1098 # Grouped to avoid MASSIVE code duplication.
1099 #
1100 disp_full_debug()
1101 {
1102 [ $DEBUG -eq 1 ] && ${ECHO} " IDS_SERVER = $IDS_SERVER"
1103 [ $DEBUG -eq 1 ] && ${ECHO} " IDS_PORT = $IDS_PORT"
1104 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_ROOTDN = $LDAP_ROOTDN"
1105 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_ROOTPWD = $LDAP_ROOTPWD"
1106 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_DOMAIN = $LDAP_DOMAIN"
1107 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SUFFIX = $LDAP_SUFFIX"
1108 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_BASEDN = $LDAP_BASEDN"
1109 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROFILE_NAME = $LDAP_PROFILE_NAME"
1110 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SERVER_LIST = $LDAP_SERVER_LIST"
1111 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PREF_SRVLIST = $LDAP_PREF_SRVLIST"
1112 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SEARCH_SCOPE = $LDAP_SEARCH_SCOPE"
1113 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_CRED_LEVEL = $LDAP_CRED_LEVEL"
1114 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_AUTHMETHOD = $LDAP_AUTHMETHOD"
1115 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_FOLLOWREF = $LDAP_FOLLOWREF"
1116 [ $DEBUG -eq 1 ] && ${ECHO} " IDS_TIMELIMIT = $IDS_TIMELIMIT"
1117 [ $DEBUG -eq 1 ] && ${ECHO} " IDS_SIZELIMIT = $IDS_SIZELIMIT"
1118 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_CRYPT = $NEED_CRYPT"
1119 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_SRVAUTH_PAM = $NEED_SRVAUTH_PAM"
1120 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_SRVAUTH_KEY = $NEED_SRVAUTH_KEY"
1121 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_SRVAUTH_CMD = $NEED_SRVAUTH_CMD"
1122 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SRV_AUTHMETHOD_PAM = $LDAP_SRV_AUTHMETHOD_PAM"
1123 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SRV_AUTHMETHOD_KEY = $LDAP_SRV_AUTHMETHOD_KEY"
1124 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SRV_AUTHMETHOD_CMD = $LDAP_SRV_AUTHMETHOD_CMD"
1125 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SEARCH_TIME_LIMIT = $LDAP_SEARCH_TIME_LIMIT"
1126 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROFILE_TTL = $LDAP_PROFILE_TTL"
1127 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_BIND_LIMIT = $LDAP_BIND_LIMIT"
1128 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_ENABLE_SHADOW_UPDATE = $LDAP_ENABLE_SHADOW_UPDATE"
1129
1130 # Only display proxy stuff if needed.
1131 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_PROXY = $NEED_PROXY"
1132 if [ $NEED_PROXY -eq 1 ]; then
1133 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROXYAGENT = $LDAP_PROXYAGENT"
1134 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROXYAGENT_CRED = $LDAP_PROXYAGENT_CRED"
1135 fi
1136
1137 # Only display admin credential if needed.
1138 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_ADMIN = $NEED_ADMIN"
1139 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_HOSTACL = $NEED_HOSTACL"
1140 if [ $NEED_ADMIN -eq 1 ]; then
1141 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_ADMINDN = $LDAP_ADMINDN"
1142 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_ADMIN_CRED = $LDAP_ADMIN_CRED"
1143 fi
1144
1145 # Service Search Descriptors are a special case.
1146 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SERV_SRCH_DES = $LDAP_SERV_SRCH_DES"
1147 }
1148
1149
1150 #
1151 # load_config_file(): Loads the config file.
1152 #
1153 load_config_file()
1154 {
1155 [ $DEBUG -eq 1 ] && ${ECHO} "In load_config_file()"
1156
1157 # Remove SSD lines from input file before sourcing.
1158 # The SSD lines must be removed because some forms of the
1159 # data could cause SHELL errors.
1160 ${GREP} -v "LDAP_SERV_SRCH_DES=" ${INPUT_FILE} > ${TMPDIR}/inputfile.noSSD
1161
1162 # Source the input file.
1163 . ${TMPDIR}/inputfile.noSSD
1164
1165 # If LDAP_SUFFIX is no set, try to utilize LDAP_TREETOP since older
1166 # config files use LDAP_TREETOP
1167 LDAP_SUFFIX="${LDAP_SUFFIX:-$LDAP_TREETOP}"
1168
1169 # Save password to temporary file.
1170 save_password
1171
1172 # Create the SSD file.
1173 create_ssd_file
1174
1175 # Display FULL debugging info.
1176 disp_full_debug
1177 }
1178
1179 #
1180 # save_password(): Save password to temporary file.
1181 #
1182 save_password()
1183 {
1184 cat > ${LDAP_ROOTPWF} <<EOF
1185 ${LDAP_ROOTPWD}
1186 EOF
1187 }
1188
1189 ######################################################################
1190 # FUNCTIONS FOR prompt_config_info() START HERE.
1191 ######################################################################
1192
1193 #
1194 # get_ids_server(): Prompt for iDS server name.
1195 #
1196 get_ids_server()
1197 {
1198 while :
1199 do
1200 # Prompt for server name.
1201 get_ans "Enter the JES Directory Server's hostname to setup:" "$IDS_SERVER"
1202 IDS_SERVER="$ANS"
1203
1204 # Ping server to see if live. If valid break out of loop.
1205 ping $IDS_SERVER > /dev/null 2>&1
1206 if [ $? -eq 0 ]; then
1207 break
1208 fi
1209
1210 # Invalid server, enter a new name.
1211 ${ECHO} "ERROR: Server '${IDS_SERVER}' is invalid or unreachable."
1212 IDS_SERVER=""
1213 done
1214
1215 # Set SERVER_ARGS and LDAP_ARGS since values might of changed.
1216 SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}"
1217 LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}"
1218 export SERVER_ARGS
1219
1220 }
1221
1222 #
1223 # get_ids_port(): Prompt for iDS port number.
1224 #
1225 get_ids_port()
1226 {
1227 # Get a valid iDS port number.
1228 while :
1229 do
1230 # Enter port number.
1231 get_number "Enter the port number for iDS (h=help):" "$IDS_PORT" "port_help"
1232 IDS_PORT=$ANS
1233 # Do a simple search to check hostname and port number.
1234 # If search returns SUCCESS, break out, host and port must
1235 # be valid.
1236 ${LDAPSEARCH} -h ${IDS_SERVER} -p ${IDS_PORT} -b "" -s base "objectclass=*" > /dev/null 2>&1
1237 if [ $? -eq 0 ]; then
1238 break
1239 fi
1240
1241 # Invalid host/port pair, Re-enter.
1242 ${ECHO} "ERROR: Invalid host or port: ${IDS_SERVER}:${IDS_PORT}, Please re-enter!"
1243 get_ids_server
1244 done
1245
1246 # Set SERVER_ARGS and LDAP_ARGS since values might of changed.
1247 SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}"
1248 LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}"
1249 export SERVER_ARGS
1250 }
1251
1252
1253 #
1254 # chk_ids_version(): Read the slapd config file and set variables
1255 #
1256 chk_ids_version()
1257 {
1258 [ $DEBUG -eq 1 ] && ${ECHO} "In chk_ids_version()"
1259
1260 # check iDS version number.
1261 eval "${LDAPSEARCH} ${SERVER_ARGS} -b cn=monitor -s base \"objectclass=*\" version | ${GREP} \"^version=\" | cut -f2 -d'/' | cut -f1 -d' ' > ${TMPDIR}/checkDSver 2>&1"
1262 if [ $? -ne 0 ]; then
1263 ${ECHO} "ERROR: Can not determine the version number of iDS!"
1264 exit 1
1265 fi
1266 IDS_VER=`cat ${TMPDIR}/checkDSver`
1267 IDS_MAJVER=`${ECHO} ${IDS_VER} | cut -f1 -d.`
1268 IDS_MINVER=`${ECHO} ${IDS_VER} | cut -f2 -d.`
1269 case "${IDS_MAJVER}" in
1270 5|6|7) : ;;
1271 *) ${ECHO} "ERROR: $PROG only works with JES DS version 5.x, 6.x or 7.x, not ${IDS_VER}."; exit 1;;
1272 esac
1273
1274 if [ $DEBUG -eq 1 ]; then
1275 ${ECHO} " IDS_MAJVER = $IDS_MAJVER"
1276 ${ECHO} " IDS_MINVER = $IDS_MINVER"
1277 fi
1278 }
1279
1280
1281 #
1282 # get_dirmgr_dn(): Get the directory manger DN.
1283 #
1284 get_dirmgr_dn()
1285 {
1286 get_ans "Enter the directory manager DN:" "$LDAP_ROOTDN"
1287 LDAP_ROOTDN=$ANS
1288
1289 # Update ENV variables using DN.
1290 AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}"
1291 LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}"
1292 export AUTH_ARGS LDAP_ARGS
1293 }
1294
1295
1296 #
1297 # get_dirmgr_pw(): Get the Root DN passwd. (Root DN found in slapd.conf)
1298 #
1299 get_dirmgr_pw()
1300 {
1301 while :
1302 do
1303 # Get passwd.
1304 get_passwd_nochk "Enter passwd for ${LDAP_ROOTDN} :"
1305 LDAP_ROOTPWD=$ANS
1306
1307 # Store password in file.
1308 save_password
1309
1310 # Update ENV variables using DN's PW.
1311 AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}"
1312 LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}"
1313 export AUTH_ARGS LDAP_ARGS
1314
1315 # Verify that ROOTDN and ROOTPWD are valid.
1316 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" > ${TMPDIR}/checkDN 2>&1"
1317 if [ $? -ne 0 ]; then
1318 eval "${GREP} credential ${TMPDIR}/checkDN ${VERB}"
1319 if [ $? -eq 0 ]; then
1320 ${ECHO} "ERROR: Root DN passwd is invalid."
1321 else
1322 ${ECHO} "ERROR: Invalid Root DN <${LDAP_ROOTDN}>."
1323 get_dirmgr_dn
1324 fi
1325 else
1326 break # Both are valid.
1327 fi
1328 done
1329
1330
1331 }
1332
1333
1334 #
1335 # get_domain(): Get the Domain that will be served by the LDAP server.
1336 # $1 - Help argument.
1337 #
1338 get_domain()
1339 {
1340 # Use LDAP_DOMAIN as default.
1341 get_ans "Enter the domainname to be served (h=help):" $LDAP_DOMAIN
1342
1343 # Check domainname, and have user re-enter if not valid.
1344 check_domainname $ANS
1345 while [ $? -ne 0 ]
1346 do
1347 case "$ANS" in
1348 [Hh] | help | Help | \?) display_msg ${1:-sorry} ;;
1349 * ) ${ECHO} "Invalid domainname: \"${ANS}\"."
1350 ;;
1351 esac
1352 get_ans "Enter domainname to be served (h=help):" $DOM
1353
1354 check_domainname $ANS
1355 done
1356
1357 # Set the domainname to valid name.
1358 LDAP_DOMAIN=$ANS
1359 }
1360
1361
1362 #
1363 # get_basedn(): Query for the Base DN.
1364 #
1365 get_basedn()
1366 {
1367 # Set the $_DOM_2_DC and assign to LDAP_BASEDN as default.
1368 # Then call get_basedn(). This method remakes the default
1369 # each time just in case the domain changed.
1370 domain_2_dc $LDAP_DOMAIN
1371 LDAP_BASEDN=$_DOM_2_DC
1372
1373 # Get Base DN.
1374 while :
1375 do
1376 get_ans_req "Enter LDAP Base DN (h=help):" "${_DOM_2_DC}"
1377 check_baseDN "$ANS"
1378 while [ $? -ne 0 ]
1379 do
1380 case "$ANS" in
1381 [Hh] | help | Help | \?) display_msg basedn_help ;;
1382 * ) ${ECHO} "Invalid base DN: \"${ANS}\"."
1383 ;;
1384 esac
1385
1386 # Re-Enter the BaseDN
1387 get_ans_req "Enter LDAP Base DN (h=help):" "${_DOM_2_DC}"
1388 check_baseDN "$ANS"
1389 done
1390
1391 # Set base DN and check its suffix
1392 LDAP_BASEDN=${ANS}
1393 check_basedn_suffix ||
1394 {
1395 cleanup
1396 exit 1
1397 }
1398
1399 # suffix may need to be created, in that case get suffix from user
1400 [ -n "${NEED_CREATE_SUFFIX}" ] &&
1401 {
1402 get_suffix || continue
1403 }
1404
1405 # suffix is ok, break out of the base dn inquire loop
1406 break
1407 done
1408 }
1409
1410 #
1411 # get_want_shadow_update(): Ask user if want to enable shadow update?
1412 #
1413 get_want_shadow_update()
1414 {
1415 MSG="Do you want to enable shadow update (y/n/h)?"
1416 get_confirm "$MSG" "n" "enable_shadow_update_help"
1417 if [ $? -eq 1 ]; then
1418 LDAP_ENABLE_SHADOW_UPDATE="TRUE"
1419 else
1420 LDAP_ENABLE_SHADOW_UPDATE="FALSE"
1421 fi
1422 }
1423
1424 get_krb_realm() {
1425
1426 # To upper cases
1427 LDAP_KRB_REALM=`${ECHO} ${LDAP_DOMAIN} | ${AWK} '{ print toupper($0) }'`
1428 get_ans_req "Enter Kerberos Realm:" "$LDAP_KRB_REALM"
1429 # To upper cases
1430 LDAP_KRB_REALM=`${ECHO} ${ANS} | ${AWK} '{ print toupper($0) }'`
1431 }
1432
1433 # $1: DN
1434 # $2: ldif file
1435 add_entry_by_DN() {
1436
1437 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${1}\" -s base \"objectclass=*\" ${VERB}"
1438 if [ $? -eq 0 ]; then
1439 ${ECHO} " ${1} already exists"
1440 return 0
1441 else
1442 ${EVAL} "${LDAPADD} ${LDAP_ARGS} -f ${2} ${VERB}"
1443 if [ $? -eq 0 ]; then
1444 ${ECHO} " ${1} is added"
1445 return 0
1446 else
1447 ${ECHO} " ERROR: failed to add ${1}"
1448 return 1
1449 fi
1450 fi
1451
1452 }
1453 #
1454 # Kerberos princiapl to DN mapping rules
1455 #
1456 # Add rules for host credentails and user credentials
1457 #
1458 add_id_mapping_rules() {
1459
1460 ${ECHO} " Adding Kerberos principal to DN mapping rules..."
1461
1462 _C_DN="cn=GSSAPI,cn=identity mapping,cn=config"
1463 ( cat << EOF
1464 dn: cn=GSSAPI,cn=identity mapping,cn=config
1465 objectClass: top
1466 objectClass: nsContainer
1467 cn: GSSAPI
1468 EOF
1469 ) > ${TMPDIR}/GSSAPI_container.ldif
1470
1471 add_entry_by_DN "${_C_DN}" "${TMPDIR}/GSSAPI_container.ldif"
1472 if [ $? -ne 0 ];
1473 then
1474 ${RM} ${TMPDIR}/GSSAPI_container.ldif
1475 return
1476 fi
1477
1478 _H_CN="host_auth_${LDAP_KRB_REALM}"
1479 _H_DN="cn=${_H_CN}, ${_C_DN}"
1480 ( cat << EOF
1481 dn: ${_H_DN}
1482 objectClass: top
1483 objectClass: nsContainer
1484 objectClass: dsIdentityMapping
1485 objectClass: dsPatternMatching
1486 cn: ${_H_CN}
1487 dsMatching-pattern: \${Principal}
1488 dsMatching-regexp: host\/(.*).${LDAP_DOMAIN}@${LDAP_KRB_REALM}
1489 dsSearchBaseDN: ou=hosts,${LDAP_BASEDN}
1490 dsSearchFilter: (&(objectClass=ipHost)(cn=\$1))
1491 dsSearchScope: one
1492
1493 EOF
1494 ) > ${TMPDIR}/${_H_CN}.ldif
1495
1496 add_entry_by_DN "${_H_DN}" "${TMPDIR}/${_H_CN}.ldif"
1497
1498 _U_CN="user_auth_${LDAP_KRB_REALM}"
1499 _U_DN="cn=${_U_CN}, ${_C_DN}"
1500 ( cat << EOF
1501 dn: ${_U_DN}
1502 objectClass: top
1503 objectClass: nsContainer
1504 objectClass: dsIdentityMapping
1505 objectClass: dsPatternMatching
1506 cn: ${_U_CN}
1507 dsMatching-pattern: \${Principal}
1508 dsMatching-regexp: (.*)@${LDAP_KRB_REALM}
1509 dsMappedDN: uid=\$1,ou=People,${LDAP_BASEDN}
1510
1511 EOF
1512 ) > ${TMPDIR}/${_U_CN}.ldif
1513
1514 add_entry_by_DN "${_U_DN}" "${TMPDIR}/${_U_CN}.ldif"
1515
1516 }
1517
1518
1519 #
1520 # Modify ACL to allow root to read all the password and only self can read
1521 # its own password when sasl/GSSAPI bind is used
1522 #
1523 modify_userpassword_acl_for_gssapi() {
1524
1525 _P_DN="ou=People,${LDAP_BASEDN}"
1526 _H_DN="ou=Hosts,${LDAP_BASEDN}"
1527 _P_ACI="self-read-pwd"
1528
1529 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${_P_DN}\" -s base \"objectclass=*\" > /dev/null 2>&1"
1530 if [ $? -ne 0 ]; then
1531 ${ECHO} " ${_P_DN} does not exist"
1532 # Not Found. Create a new entry
1533 ( cat << EOF
1534 dn: ${_P_DN}
1535 ou: People
1536 objectClass: top
1537 objectClass: organizationalUnit
1538 EOF
1539 ) > ${TMPDIR}/gssapi_people.ldif
1540
1541 add_entry_by_DN "${_P_DN}" "${TMPDIR}/gssapi_people.ldif"
1542 else
1543 ${ECHO} " ${_P_DN} already exists"
1544 fi
1545
1546 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${_P_DN}\" -s base \"objectclass=*\" aci > ${TMPDIR}/chk_gssapi_aci 2>&1"
1547
1548 if [ $? -eq 0 ]; then
1549 ${EVAL} "${GREP} ${_P_ACI} ${TMPDIR}/chk_gssapi_aci > /dev/null 2>&1"
1550 if [ $? -eq 0 ]; then
1551 ${ECHO} " userpassword ACL ${_P_ACI} already exists."
1552 return
1553 else
1554 ${ECHO} " userpassword ACL ${_P_ACI} not found. Create a new one."
1555 fi
1556 else
1557 ${ECHO} " Error searching aci for ${_P_DN}"
1558 cat ${TMPDIR}/chk_gssapi_aci
1559 cleanup
1560 exit 1
1561 fi
1562 ( cat << EOF
1563 dn: ${_P_DN}
1564 changetype: modify
1565 add: aci
1566 aci: (targetattr="userPassword")(version 3.0; acl self-read-pwd; allow (read,search) userdn="ldap:///self" and authmethod="sasl GSSAPI";)
1567 -
1568 add: aci
1569 aci: (targetattr="userPassword")(version 3.0; acl host-read-pwd; allow (read,search) userdn="ldap:///cn=*+ipHostNumber=*,ou=Hosts,${LDAP_BASEDN}" and authmethod="sasl GSSAPI";)
1570 EOF
1571 ) > ${TMPDIR}/user_gssapi.ldif
1572 LDAP_TYPE_OR_VALUE_EXISTS=20
1573 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/user_gssapi.ldif ${VERB}"
1574
1575 case $? in
1576 0)
1577 ${ECHO} " ${_P_DN} uaserpassword ACL is updated."
1578 ;;
1579 20)
1580 ${ECHO} " ${_P_DN} uaserpassword ACL already exists."
1581 ;;
1582 *)
1583 ${ECHO} " ERROR: update of userpassword ACL for ${_P_DN} failed!"
1584 cleanup
1585 exit 1
1586 ;;
1587 esac
1588 }
1589 #
1590 # $1: objectclass or attributetyp
1591 # $2: name
1592 search_update_schema() {
1593
1594 ATTR="${1}es"
1595
1596 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b cn=schema -s base \"objectclass=*\" ${ATTR} | ${GREP} -i \"${2}\" ${VERB}"
1597 if [ $? -ne 0 ]; then
1598 ${ECHO} "${1} ${2} does not exist."
1599 update_schema_attr
1600 update_schema_obj
1601 SCHEMA_UPDATED=1
1602 else
1603 ${ECHO} "${1} ${2} already exists. Schema has been updated"
1604 fi
1605 }
1606
1607 #
1608 # Set up GSSAPI if necessary
1609 #
1610 gssapi_setup() {
1611
1612 GSSAPI_ENABLE=0
1613
1614 # assume sasl/GSSAPI is supported by the ldap server and may be used
1615 GSSAPI_AUTH_MAY_BE_USED=1
1616
1617 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" supportedSASLMechanisms | ${GREP} GSSAPI ${VERB}"
1618 if [ $? -ne 0 ]; then
1619 GSSAPI_AUTH_MAY_BE_USED=0
1620 ${ECHO} " sasl/GSSAPI is not supported by this LDAP server"
1621 return
1622 fi
1623
1624 get_confirm "GSSAPI is supported. Do you want to set up gssapi:(y/n)" "n"
1625 if [ $? -eq 0 ]; then
1626 GSSAPI_ENABLE=0
1627 ${ECHO}
1628 ${ECHO} "GSSAPI is not set up."
1629 ${ECHO} "sasl/GSSAPI bind may not work if it's not set up first."
1630 else
1631 GSSAPI_ENABLE=1
1632 get_krb_realm
1633 fi
1634
1635 }
1636 #
1637 # get_profile_name(): Enter the profile name.
1638 #
1639 get_profile_name()
1640 {
1641 # Reset Delete Old Profile since getting new profile name.
1642 DEL_OLD_PROFILE=0
1643
1644 # Loop until valid profile name, or replace.
1645 while :
1646 do
1647 # Prompt for profile name.
1648 get_ans "Enter the profile name (h=help):" "$LDAP_PROFILE_NAME"
1649
1650 # Check for Help.
1651 case "$ANS" in
1652 [Hh] | help | Help | \?) display_msg profile_help
1653 continue ;;
1654 * ) ;;
1655 esac
1656
1657 # Search to see if profile name already exists.
1658 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${ANS},ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}"
1659 if [ $? -eq 0 ]; then
1660
1661 cat << EOF
1662
1663 Profile '${ANS}' already exists, it is possible to enable
1664 shadow update now. idsconfig will exit after shadow update
1665 is enabled. You can also continue to overwrite the profile
1666 or create a new one and be given the chance to enable
1667 shadow update later.
1668
1669 EOF
1670
1671 MSG="Just enable shadow update (y/n/h)?"
1672 get_confirm "$MSG" "n" "enable_shadow_update_help"
1673 if [ $? -eq 1 ]; then
1674 [ $DEBUG -eq 1 ] && ${ECHO} "set up shadow update"
1675 LDAP_ENABLE_SHADOW_UPDATE=TRUE
1676 # display alternate messages
1677 EXISTING_PROFILE=1
1678 # Set Profile Name.
1679 LDAP_PROFILE_NAME=$ANS
1680 return 0 # set up credentials for shadow update.
1681 fi
1682
1683 get_confirm_nodef "Are you sure you want to overwrite profile cn=${ANS}?"
1684 if [ $? -eq 1 ]; then
1685 DEL_OLD_PROFILE=1
1686 return 0 # Replace old profile name.
1687 else
1688 ${ECHO} "Please re-enter a new profile name."
1689 fi
1690 else
1691 break # Unique profile name.
1692 fi
1693 done
1694
1695 # Set Profile Name.
1696 LDAP_PROFILE_NAME=$ANS
1697 }
1698
1699
1700 #
1701 # get_srv_list(): Get the default server list.
1702 #
1703 get_srv_list()
1704 {
1705 # If LDAP_SERVER_LIST is NULL, then set, otherwise leave alone.
1706 if [ -z "${LDAP_SERVER_LIST}" ]; then
1707 LDAP_SERVER_LIST=`getent hosts ${IDS_SERVER} | awk '{print $1}'`
1708 if [ ${IDS_PORT} -ne 389 ]; then
1709 LDAP_SERVER_LIST="${LDAP_SERVER_LIST}:${IDS_PORT}"
1710 fi
1711 fi
1712
1713 # Prompt for new LDAP_SERVER_LIST.
1714 while :
1715 do
1716 get_ans "Default server list (h=help):" $LDAP_SERVER_LIST
1717
1718 # If help continue, otherwise break.
1719 case "$ANS" in
1720 [Hh] | help | Help | \?) display_msg def_srvlist_help ;;
1721 * ) break ;;
1722 esac
1723 done
1724 LDAP_SERVER_LIST=$ANS
1725 }
1726
1727
1728 #
1729 # get_pref_srv(): The preferred server list (Overrides the server list)
1730 #
1731 get_pref_srv()
1732 {
1733 while :
1734 do
1735 get_ans "Preferred server list (h=help):" $LDAP_PREF_SRVLIST
1736
1737 # If help continue, otherwise break.
1738 case "$ANS" in
1739 [Hh] | help | Help | \?) display_msg pref_srvlist_help ;;
1740 * ) break ;;
1741 esac
1742 done
1743 LDAP_PREF_SRVLIST=$ANS
1744 }
1745
1746
1747 #
1748 # get_search_scope(): Get the search scope from the user.
1749 #
1750 get_search_scope()
1751 {
1752 [ $DEBUG -eq 1 ] && ${ECHO} "In get_search_scope()"
1753
1754 _MENU_CHOICE=0
1755 while :
1756 do
1757 get_ans "Choose desired search scope (one, sub, h=help): " "one"
1758 _MENU_CHOICE=$ANS
1759 case "$_MENU_CHOICE" in
1760 one) LDAP_SEARCH_SCOPE="one"
1761 return 1 ;;
1762 sub) LDAP_SEARCH_SCOPE="sub"
1763 return 2 ;;
1764 h) display_msg srch_scope_help ;;
1765 *) ${ECHO} "Please enter \"one\", \"sub\", or \"h\"." ;;
1766 esac
1767 done
1768
1769 }
1770
1771
1772 #
1773 # get_cred_level(): Function to display menu to user and get the
1774 # credential level.
1775 #
1776 get_cred_level()
1777 {
1778 [ $DEBUG -eq 1 ] && ${ECHO} "In get_cred_level()"
1779
1780 _MENU_CHOICE=0
1781 display_msg cred_level_menu
1782 while :
1783 do
1784 if [ $GSSAPI_ENABLE -eq 1 ]; then
1785 ${ECHO} '"self" is needed for GSSAPI profile'
1786 fi
1787 get_ans "Choose Credential level [h=help]:" "1"
1788 _MENU_CHOICE=$ANS
1789 case "$_MENU_CHOICE" in
1790 1) LDAP_CRED_LEVEL="anonymous"
1791 return 1 ;;
1792 2) LDAP_CRED_LEVEL="proxy"
1793 return 2 ;;
1794 3) LDAP_CRED_LEVEL="proxy anonymous"
1795 return 3 ;;
1796 4) LDAP_CRED_LEVEL="self"
1797 return 4 ;;
1798 h) display_msg cred_lvl_help ;;
1799 *) ${ECHO} "Please enter 1, 2, 3 or 4." ;;
1800 esac
1801 done
1802 }
1803
1804
1805 #
1806 # srvauth_menu_handler(): Enter the Service Authentication method.
1807 #
1808 srvauth_menu_handler()
1809 {
1810 # Display Auth menu
1811 display_msg srvauth_method_menu
1812
1813 # Get a Valid choice.
1814 while :
1815 do
1816 # Display appropriate prompt and get answer.
1817 if [ $_FIRST -eq 1 ]; then
1818 get_ans "Choose Service Authentication Method:" "1"
1819 else
1820 get_ans "Choose Service Authentication Method (0=reset):"
1821 fi
1822
1823 # Determine choice.
1824 _MENU_CHOICE=$ANS
1825 case "$_MENU_CHOICE" in
1826 1) _AUTHMETHOD="simple"
1827 break ;;
1828 2) _AUTHMETHOD="sasl/DIGEST-MD5"
1829 break ;;
1830 3) _AUTHMETHOD="tls:simple"
1831 break ;;
1832 4) _AUTHMETHOD="tls:sasl/DIGEST-MD5"
1833 break ;;
1834 5) _AUTHMETHOD="sasl/GSSAPI"
1835 break ;;
1836 0) _AUTHMETHOD=""
1837 _FIRST=1
1838 break ;;
1839 *) ${ECHO} "Please enter 1-5 or 0 to reset." ;;
1840 esac
1841 done
1842 }
1843
1844
1845 #
1846 # auth_menu_handler(): Enter the Authentication method.
1847 #
1848 auth_menu_handler()
1849 {
1850 # Display Auth menu
1851 display_msg auth_method_menu
1852
1853 # Get a Valid choice.
1854 while :
1855 do
1856 if [ $GSSAPI_ENABLE -eq 1 ]; then
1857 ${ECHO} '"sasl/GSSAPI" is needed for GSSAPI profile'
1858 fi
1859 # Display appropriate prompt and get answer.
1860 if [ $_FIRST -eq 1 ]; then
1861 get_ans "Choose Authentication Method (h=help):" "1"
1862 else
1863 get_ans "Choose Authentication Method (0=reset, h=help):"
1864 fi
1865
1866 # Determine choice.
1867 _MENU_CHOICE=$ANS
1868 case "$_MENU_CHOICE" in
1869 1) _AUTHMETHOD="none"
1870 break ;;
1871 2) _AUTHMETHOD="simple"
1872 break ;;
1873 3) _AUTHMETHOD="sasl/DIGEST-MD5"
1874 break ;;
1875 4) _AUTHMETHOD="tls:simple"
1876 break ;;
1877 5) _AUTHMETHOD="tls:sasl/DIGEST-MD5"
1878 break ;;
1879 6) _AUTHMETHOD="sasl/GSSAPI"
1880 break ;;
1881 0) _AUTHMETHOD=""
1882 _FIRST=1
1883 break ;;
1884 h) display_msg auth_help ;;
1885 *) ${ECHO} "Please enter 1-6, 0=reset, or h=help." ;;
1886 esac
1887 done
1888 }
1889
1890
1891 #
1892 # get_auth(): Enter the Authentication method.
1893 #
1894 get_auth()
1895 {
1896 [ $DEBUG -eq 1 ] && ${ECHO} "In get_auth()"
1897
1898 _FIRST=1 # Flag for first time.
1899 _MENU_CHOICE=0
1900 _AUTHMETHOD="" # Tmp method.
1901
1902 while :
1903 do
1904 # Call Menu handler
1905 auth_menu_handler
1906
1907 # Add Auth Method to list.
1908 if [ $_FIRST -eq 1 ]; then
1909 LDAP_AUTHMETHOD="${_AUTHMETHOD}"
1910 _FIRST=0
1911 else
1912 LDAP_AUTHMETHOD="${LDAP_AUTHMETHOD};${_AUTHMETHOD}"
1913 fi
1914
1915 # Display current Authentication Method.
1916 ${ECHO} ""
1917 ${ECHO} "Current authenticationMethod: ${LDAP_AUTHMETHOD}"
1918 ${ECHO} ""
1919
1920 # Prompt for another Auth Method, or break out.
1921 get_confirm_nodef "Do you want to add another Authentication Method?"
1922 if [ $? -eq 0 ]; then
1923 break;
1924 fi
1925 done
1926 }
1927
1928
1929 #
1930 # get_followref(): Whether or not to follow referrals.
1931 #
1932 get_followref()
1933 {
1934 get_confirm "Do you want the clients to follow referrals (y/n/h)?" "n" "referrals_help"
1935 if [ $? -eq 1 ]; then
1936 LDAP_FOLLOWREF="TRUE"
1937 else
1938 LDAP_FOLLOWREF="FALSE"
1939 fi
1940 }
1941
1942
1943 #
1944 # get_timelimit(): Set the time limit. -1 is max time.
1945 #
1946 get_timelimit()
1947 {
1948 # Get current timeout value from cn=config.
1949 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-timelimit > ${TMPDIR}/chk_timeout 2>&1"
1950 if [ $? -ne 0 ]; then
1951 ${ECHO} " ERROR: Could not reach LDAP server to check current timeout!"
1952 cleanup
1953 exit 1
1954 fi
1955 CURR_TIMELIMIT=`${GREP} timelimit ${TMPDIR}/chk_timeout | cut -f2 -d=`
1956
1957 get_negone_num "Enter the time limit for iDS (current=${CURR_TIMELIMIT}):" "-1"
1958 IDS_TIMELIMIT=$NUM
1959 }
1960
1961
1962 #
1963 # get_sizelimit(): Set the size limit. -1 is max size.
1964 #
1965 get_sizelimit()
1966 {
1967 # Get current sizelimit value from cn=config.
1968 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-sizelimit > ${TMPDIR}/chk_sizelimit 2>&1"
1969 if [ $? -ne 0 ]; then
1970 ${ECHO} " ERROR: Could not reach LDAP server to check current sizelimit!"
1971 cleanup
1972 exit 1
1973 fi
1974 CURR_SIZELIMIT=`${GREP} sizelimit ${TMPDIR}/chk_sizelimit | cut -f2 -d=`
1975
1976 get_negone_num "Enter the size limit for iDS (current=${CURR_SIZELIMIT}):" "-1"
1977 IDS_SIZELIMIT=$NUM
1978 }
1979
1980
1981 #
1982 # get_want_crypt(): Ask user if want to store passwords in crypt?
1983 #
1984 get_want_crypt()
1985 {
1986 get_confirm "Do you want to store passwords in \"crypt\" format (y/n/h)?" "n" "crypt_help"
1987 if [ $? -eq 1 ]; then
1988 NEED_CRYPT="TRUE"
1989 else
1990 NEED_CRYPT="FALSE"
1991 fi
1992 }
1993
1994
1995 #
1996 # get_srv_authMethod_pam(): Get the Service Auth Method for pam_ldap from user.
1997 #
1998 # NOTE: This function is base on get_auth().
1999 #
2000 get_srv_authMethod_pam()
2001 {
2002 [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_pam()"
2003
2004 _FIRST=1 # Flag for first time.
2005 _MENU_CHOICE=0
2006 _AUTHMETHOD="" # Tmp method.
2007
2008 while :
2009 do
2010 # Call Menu handler
2011 srvauth_menu_handler
2012
2013 # Add Auth Method to list.
2014 if [ $_FIRST -eq 1 ]; then
2015 if [ "$_AUTHMETHOD" = "" ]; then
2016 LDAP_SRV_AUTHMETHOD_PAM=""
2017 else
2018 LDAP_SRV_AUTHMETHOD_PAM="pam_ldap:${_AUTHMETHOD}"
2019 fi
2020 _FIRST=0
2021 else
2022 LDAP_SRV_AUTHMETHOD_PAM="${LDAP_SRV_AUTHMETHOD_PAM};${_AUTHMETHOD}"
2023 fi
2024
2025 # Display current Authentication Method.
2026 ${ECHO} ""
2027 ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_PAM}"
2028 ${ECHO} ""
2029
2030 # Prompt for another Auth Method, or break out.
2031 get_confirm_nodef "Do you want to add another Authentication Method?"
2032 if [ $? -eq 0 ]; then
2033 break;
2034 fi
2035 done
2036
2037 # Check in case user reset string and exited loop.
2038 if [ "$LDAP_SRV_AUTHMETHOD_PAM" = "" ]; then
2039 NEED_SRVAUTH_PAM=0
2040 fi
2041 }
2042
2043
2044 #
2045 # get_srv_authMethod_key(): Get the Service Auth Method for keyserv from user.
2046 #
2047 # NOTE: This function is base on get_auth().
2048 #
2049 get_srv_authMethod_key()
2050 {
2051 [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_key()"
2052
2053 _FIRST=1 # Flag for first time.
2054 _MENU_CHOICE=0
2055 _AUTHMETHOD="" # Tmp method.
2056
2057 while :
2058 do
2059 # Call Menu handler
2060 srvauth_menu_handler
2061
2062 # Add Auth Method to list.
2063 if [ $_FIRST -eq 1 ]; then
2064 if [ "$_AUTHMETHOD" = "" ]; then
2065 LDAP_SRV_AUTHMETHOD_KEY=""
2066 else
2067 LDAP_SRV_AUTHMETHOD_KEY="keyserv:${_AUTHMETHOD}"
2068 fi
2069 _FIRST=0
2070 else
2071 LDAP_SRV_AUTHMETHOD_KEY="${LDAP_SRV_AUTHMETHOD_KEY};${_AUTHMETHOD}"
2072 fi
2073
2074 # Display current Authentication Method.
2075 ${ECHO} ""
2076 ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_KEY}"
2077 ${ECHO} ""
2078
2079 # Prompt for another Auth Method, or break out.
2080 get_confirm_nodef "Do you want to add another Authentication Method?"
2081 if [ $? -eq 0 ]; then
2082 break;
2083 fi
2084 done
2085
2086 # Check in case user reset string and exited loop.
2087 if [ "$LDAP_SRV_AUTHMETHOD_KEY" = "" ]; then
2088 NEED_SRVAUTH_KEY=0
2089 fi
2090 }
2091
2092
2093 #
2094 # get_srv_authMethod_cmd(): Get the Service Auth Method for passwd-cmd from user.
2095 #
2096 # NOTE: This function is base on get_auth().
2097 #
2098 get_srv_authMethod_cmd()
2099 {
2100 [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_cmd()"
2101
2102 _FIRST=1 # Flag for first time.
2103 _MENU_CHOICE=0
2104 _AUTHMETHOD="" # Tmp method.
2105
2106 while :
2107 do
2108 # Call Menu handler
2109 srvauth_menu_handler
2110
2111 # Add Auth Method to list.
2112 if [ $_FIRST -eq 1 ]; then
2113 if [ "$_AUTHMETHOD" = "" ]; then
2114 LDAP_SRV_AUTHMETHOD_CMD=""
2115 else
2116 LDAP_SRV_AUTHMETHOD_CMD="passwd-cmd:${_AUTHMETHOD}"
2117 fi
2118 _FIRST=0
2119 else
2120 LDAP_SRV_AUTHMETHOD_CMD="${LDAP_SRV_AUTHMETHOD_CMD};${_AUTHMETHOD}"
2121 fi
2122
2123 # Display current Authentication Method.
2124 ${ECHO} ""
2125 ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_CMD}"
2126 ${ECHO} ""
2127
2128 # Prompt for another Auth Method, or break out.
2129 get_confirm_nodef "Do you want to add another Authentication Method?"
2130 if [ $? -eq 0 ]; then
2131 break;
2132 fi
2133 done
2134
2135 # Check in case user reset string and exited loop.
2136 if [ "$LDAP_SRV_AUTHMETHOD_CMD" = "" ]; then
2137 NEED_SRVAUTH_CMD=0
2138 fi
2139 }
2140
2141
2142 #
2143 # get_srch_time(): Amount of time to search.
2144 #
2145 get_srch_time()
2146 {
2147 get_negone_num "Client search time limit in seconds (h=help):" "$LDAP_SEARCH_TIME_LIMIT" "srchtime_help"
2148 LDAP_SEARCH_TIME_LIMIT=$NUM
2149 }
2150
2151
2152 #
2153 # get_prof_ttl(): The profile time to live (TTL)
2154 #
2155 get_prof_ttl()
2156 {
2157 get_negone_num "Profile Time To Live in seconds (h=help):" "$LDAP_PROFILE_TTL" "profttl_help"
2158 LDAP_PROFILE_TTL=$NUM
2159 }
2160
2161
2162 #
2163 # get_bind_limit(): Bind time limit
2164 #
2165 get_bind_limit()
2166 {
2167 get_negone_num "Bind time limit in seconds (h=help):" "$LDAP_BIND_LIMIT" "bindlim_help"
2168 LDAP_BIND_LIMIT=$NUM
2169 }
2170
2171
2172 ######################################################################
2173 # FUNCTIONS FOR Service Search Descriptor's START HERE.
2174 ######################################################################
2175
2176
2177 #
2178 # add_ssd(): Get SSD's from user and add to file.
2179 #
2180 add_ssd()
2181 {
2182 [ $DEBUG -eq 1 ] && ${ECHO} "In add_ssd()"
2183
2184 # Enter the service id. Loop til unique.
2185 while :
2186 do
2187 get_ans "Enter the service id:"
2188 _SERV_ID=$ANS
2189
2190 # Grep for name existing.
2191 ${GREP} -i "^$ANS:" ${SSD_FILE} > /dev/null 2>&1
2192 if [ $? -eq 1 ]; then
2193 break
2194 fi
2195
2196 # Name exists, print message, let user decide.
2197 ${ECHO} "ERROR: Service id ${ANS} already exists."
2198 done
2199
2200 get_ans "Enter the base:"
2201 _BASE=$ANS
2202
2203 # Get the scope and verify that its one or sub.
2204 while :
2205 do
2206 get_ans "Enter the scope:"
2207 _SCOPE=$ANS
2208 case `${ECHO} ${_SCOPE} | tr '[A-Z]' '[a-z]'` in
2209 one) break ;;
2210 sub) break ;;
2211 *) ${ECHO} "${_SCOPE} is Not valid - Enter 'one' or 'sub'" ;;
2212 esac
2213 done
2214
2215 # Build SSD to add to file.
2216 _SSD="${_SERV_ID}:${_BASE}?${_SCOPE}"
2217
2218 # Add the SSD to the file.
2219 ${ECHO} "${_SSD}" >> ${SSD_FILE}
2220 }
2221
2222
2223 #
2224 # delete_ssd(): Delete a SSD from the list.
2225 #
2226 delete_ssd()
2227 {
2228 [ $DEBUG -eq 1 ] && ${ECHO} "In delete_ssd()"
2229
2230 # Get service id name from user for SSD to delete.
2231 get_ans_req "Enter service id to delete:"
2232
2233 # Make sure service id exists.
2234 ${GREP} "$ANS" ${SSD_FILE} > /dev/null 2>&1
2235 if [ $? -eq 1 ]; then
2236 ${ECHO} "Invalid service id: $ANS not present in list."
2237 return
2238 fi
2239
2240 # Create temporary back SSD file.
2241 cp ${SSD_FILE} ${SSD_FILE}.bak
2242 if [ $? -eq 1 ]; then
2243 ${ECHO} "ERROR: could not create file: ${SSD_FILE}.bak"
2244 exit 1
2245 fi
2246
2247 # Use ${GREP} to remove the SSD. Read from temp file
2248 # and write to the orig file.
2249 ${GREP} -v "$ANS" ${SSD_FILE}.bak > ${SSD_FILE}
2250 }
2251
2252
2253 #
2254 # modify_ssd(): Allow user to modify a SSD.
2255 #
2256 modify_ssd()
2257 {
2258 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_ssd()"
2259
2260 # Prompt user for service id.
2261 get_ans_req "Enter service id to modify:"
2262
2263 # Put into temp _LINE.
2264 _LINE=`${GREP} "^$ANS:" ${SSD_FILE}`
2265 if [ "$_LINE" = "" ]; then
2266 ${ECHO} "Invalid service id: $ANS"
2267 return
2268 fi
2269
2270 # Display current filter for user to see.
2271 ${ECHO} ""
2272 ${ECHO} "Current SSD: $_LINE"
2273 ${ECHO} ""
2274
2275 # Get the defaults.
2276 _CURR_BASE=`${ECHO} $_LINE | cut -d: -f2 | cut -d'?' -f 1`
2277 _CURR_SCOPE=`${ECHO} $_LINE | cut -d: -f2 | cut -d'?' -f 2`
2278
2279 # Create temporary back SSD file.
2280 cp ${SSD_FILE} ${SSD_FILE}.bak
2281 if [ $? -eq 1 ]; then
2282 ${ECHO} "ERROR: could not create file: ${SSD_FILE}.bak"
2283 cleanup
2284 exit 1
2285 fi
2286
2287 # Removed the old line.
2288 ${GREP} -v "^$ANS:" ${SSD_FILE}.bak > ${SSD_FILE} 2>&1
2289
2290 # New Entry
2291 _SERV_ID=$ANS
2292 get_ans_req "Enter the base:" "$_CURR_BASE"
2293 _BASE=$ANS
2294 get_ans_req "Enter the scope:" "$_CURR_SCOPE"
2295 _SCOPE=$ANS
2296
2297 # Build the new SSD.
2298 _SSD="${_SERV_ID}:${_BASE}?${_SCOPE}"
2299
2300 # Add the SSD to the file.
2301 ${ECHO} "${_SSD}" >> ${SSD_FILE}
2302 }
2303
2304
2305 #
2306 # display_ssd(): Display the current SSD list.
2307 #
2308 display_ssd()
2309 {
2310 [ $DEBUG -eq 1 ] && ${ECHO} "In display_ssd()"
2311
2312 ${ECHO} ""
2313 ${ECHO} "Current Service Search Descriptors:"
2314 ${ECHO} "=================================="
2315 cat ${SSD_FILE}
2316 ${ECHO} ""
2317 ${ECHO} "Hit return to continue."
2318 read __A
2319 }
2320
2321
2322 #
2323 # prompt_ssd(): Get SSD's from user.
2324 #
2325 prompt_ssd()
2326 {
2327 [ $DEBUG -eq 1 ] && ${ECHO} "In prompt_ssd()"
2328 # See if user wants SSD's?
2329 get_confirm "Do you wish to setup Service Search Descriptors (y/n/h)?" "n" "ssd_help"
2330 [ "$?" -eq 0 ] && return
2331
2332 # Display menu for SSD choices.
2333 while :
2334 do
2335 display_msg prompt_ssd_menu
2336 get_ans "Enter menu choice:" "Quit"
2337 case "$ANS" in
2338 [Aa] | add) add_ssd ;;
2339 [Dd] | delete) delete_ssd ;;
2340 [Mm] | modify) modify_ssd ;;
2341 [Pp] | print | display) display_ssd ;;
2342 [Xx] | reset | clear) reset_ssd_file ;;
2343 [Hh] | Help | help) display_msg ssd_menu_help
2344 ${ECHO} " Press return to continue."
2345 read __A ;;
2346 [Qq] | Quit | quit) return ;;
2347 *) ${ECHO} "Invalid choice: $ANS please re-enter from menu." ;;
2348 esac
2349 done
2350 }
2351
2352
2353 #
2354 # reset_ssd_file(): Blank out current SSD file.
2355 #
2356 reset_ssd_file()
2357 {
2358 [ $DEBUG -eq 1 ] && ${ECHO} "In reset_ssd_file()"
2359
2360 rm -f ${SSD_FILE}
2361 touch ${SSD_FILE}
2362 }
2363
2364
2365 #
2366 # create_ssd_file(): Create a temporary file for SSD's.
2367 #
2368 create_ssd_file()
2369 {
2370 [ $DEBUG -eq 1 ] && ${ECHO} "In create_ssd_file()"
2371
2372 # Build a list of SSD's and store in temp file.
2373 ${GREP} "LDAP_SERV_SRCH_DES=" ${INPUT_FILE} | \
2374 sed 's/LDAP_SERV_SRCH_DES=//' \
2375 > ${SSD_FILE}
2376 }
2377
2378
2379 #
2380 # ssd_2_config(): Append the SSD file to the output file.
2381 #
2382 ssd_2_config()
2383 {
2384 [ $DEBUG -eq 1 ] && ${ECHO} "In ssd_2_config()"
2385
2386 # Convert to config file format using sed.
2387 sed -e "s/^/LDAP_SERV_SRCH_DES=/" ${SSD_FILE} >> ${OUTPUT_FILE}
2388 }
2389
2390
2391 #
2392 # ssd_2_profile(): Add SSD's to the GEN_CMD string.
2393 #
2394 ssd_2_profile()
2395 {
2396 [ $DEBUG -eq 1 ] && ${ECHO} "In ssd_2_profile()"
2397
2398 GEN_TMPFILE=${TMPDIR}/ssd_tmpfile
2399 touch ${GEN_TMPFILE}
2400
2401 # Add and convert each SSD to string.
2402 while read SSD_LINE
2403 do
2404 ${ECHO} " -a \"serviceSearchDescriptor=${SSD_LINE}\"\c" >> ${GEN_TMPFILE}
2405 done <${SSD_FILE}
2406
2407 # Add SSD's to GEN_CMD.
2408 GEN_CMD="${GEN_CMD} `cat ${GEN_TMPFILE}`"
2409 }
2410
2411 #
2412 # get_adminDN(): Get the admin DN.
2413 #
2414 get_adminDN()
2415 {
2416 LDAP_ADMINDN="cn=admin,ou=profile,${LDAP_BASEDN}" # default
2417 get_ans "Enter DN for the administrator:" "$LDAP_ADMINDN"
2418 LDAP_ADMINDN=$ANS
2419 [ $DEBUG -eq 1 ] && ${ECHO} "LDAP_ADMINDN = $LDAP_ADMINDN"
2420 }
2421
2422 #
2423 # get_admin_pw(): Get the admin passwd.
2424 #
2425 get_admin_pw()
2426 {
2427 get_passwd "Enter passwd for the administrator:"
2428 LDAP_ADMIN_CRED=$ANS
2429 [ $DEBUG -eq 1 ] && ${ECHO} "LDAP_ADMIN_CRED = $LDAP_ADMIN_CRED"
2430 }
2431
2432 #
2433 # add_admin(): Add an admin entry for nameservice for updating shadow data.
2434 #
2435 add_admin()
2436 {
2437 [ $DEBUG -eq 1 ] && ${ECHO} "In add_admin()"
2438
2439 # Check if the admin user already exists.
2440 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_ADMINDN}\" -s base \"objectclass=*\" ${VERB}"
2441 if [ $? -eq 0 ]; then
2442 MSG="Administrator ${LDAP_ADMINDN} already exists."
2443 if [ $EXISTING_PROFILE -eq 1 ]; then
2444 ${ECHO} " NOT ADDED: $MSG"
2445 else
2446 ${ECHO} " ${STEP}. $MSG"
2447 STEP=`expr $STEP + 1`
2448 fi
2449 return 0
2450 fi
2451
2452 # Get cn and sn names from LDAP_ADMINDN.
2453 cn_tmp=`${ECHO} ${LDAP_ADMINDN} | cut -f1 -d, | cut -f2 -d=`
2454
2455 # Create the tmp file to add.
2456 ( cat <<EOF
2457 dn: ${LDAP_ADMINDN}
2458 cn: ${cn_tmp}
2459 sn: ${cn_tmp}
2460 objectclass: top
2461 objectclass: person
2462 userpassword: ${LDAP_ADMIN_CRED}
2463 EOF
2464 ) > ${TMPDIR}/admin
2465
2466 # Add the entry.
2467 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/admin ${VERB}"
2468 if [ $? -ne 0 ]; then
2469 ${ECHO} " ERROR: Adding administrator identity failed!"
2470 cleanup
2471 exit 1
2472 fi
2473
2474 ${RM} -f ${TMPDIR}/admin
2475
2476 # Display message that the administrator identity is added.
2477 MSG="Administrator identity ${LDAP_ADMINDN}"
2478 if [ $EXISTING_PROFILE -eq 1 ]; then
2479 ${ECHO} " ADDED: $MSG."
2480 else
2481 ${ECHO} " ${STEP}. $MSG added."
2482 STEP=`expr $STEP + 1`
2483 fi
2484 }
2485
2486 #
2487 # allow_admin_read_write_shadow(): Give Admin read/write permission
2488 # to shadow data.
2489 #
2490 allow_admin_read_write_shadow()
2491 {
2492 [ $DEBUG -eq 1 ] && ${ECHO} "In allow_admin_read_write_shadow()"
2493
2494 # Set ACI Name
2495 ADMIN_ACI_NAME="LDAP_Naming_Services_admin_shadow_write"
2496
2497 # Search for ACI_NAME
2498 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" \
2499 -s base objectclass=* aci > ${TMPDIR}/chk_adminwrite_aci 2>&1"
2500
2501 # if an ACI with ${ADMIN_ACI_NAME} and "write,compare,read,search"
2502 # and ${LDAP_ADMINDN} already exists, we are done
2503 ${EGREP} ".*${ADMIN_ACI_NAME}.*write,compare,read,search.*${LDAP_ADMINDN}.*" \
2504 ${TMPDIR}/chk_adminwrite_aci 2>&1 > /dev/null
2505 if [ $? -eq 0 ]; then
2506 MSG="Admin ACI ${ADMIN_ACI_NAME} already exists for ${LDAP_BASEDN}."
2507 if [ $EXISTING_PROFILE -eq 1 ]; then
2508 ${ECHO} " NOT SET: $MSG"
2509 else
2510 ${ECHO} " ${STEP}. $MSG"
2511 STEP=`expr $STEP + 1`
2512 fi
2513 return 0
2514 fi
2515
2516 # If an ACI with ${ADMIN_ACI_NAME} and "(write)" and ${LDAP_ADMINDN}
2517 # already exists, delete it first.
2518 find_and_delete_ACI ".*${ADMIN_ACI_NAME}.*(write).*${LDAP_ADMINDN}.*" \
2519 ${TMPDIR}/chk_adminwrite_aci ${ADMIN_ACI_NAME}
2520
2521 # Create the tmp file to add.
2522 ( cat <<EOF
2523 dn: ${LDAP_BASEDN}
2524 changetype: modify
2525 add: aci
2526 aci: (target="ldap:///${LDAP_BASEDN}")(targetattr="shadowLastChange
2527 ||shadowMin||shadowMax||shadowWarning||shadowInactive||shadowExpire
2528 ||shadowFlag||userPassword||loginShell||homeDirectory||gecos")
2529 (version 3.0; acl ${ADMIN_ACI_NAME}; allow (write,compare,read,search)
2530 userdn = "ldap:///${LDAP_ADMINDN}";)
2531 EOF
2532 ) > ${TMPDIR}/admin_write
2533
2534 # Add the entry.
2535 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/admin_write ${VERB}"
2536 if [ $? -ne 0 ]; then
2537 ${ECHO} " ERROR: Allow ${LDAP_ADMINDN} read/write access to shadow data failed!"
2538 cleanup
2539 exit 1
2540 fi
2541
2542 ${RM} -f ${TMPDIR}/admin_write
2543 # Display message that the administrator ACL is set.
2544 MSG="Give ${LDAP_ADMINDN} read/write access to shadow data."
2545 if [ $EXISTING_PROFILE -eq 1 ]; then
2546 ${ECHO} " ACI SET: $MSG"
2547 else
2548 ${ECHO} " ${STEP}. $MSG"
2549 STEP=`expr $STEP + 1`
2550 fi
2551 }
2552
2553 #
2554 # allow_host_read_write_shadow(): Give host principal read/write permission
2555 # for shadow data.
2556 #
2557 allow_host_read_write_shadow()
2558 {
2559 [ $DEBUG -eq 1 ] && ${ECHO} "In allow_host_read_write_shadow()"
2560
2561 # Set ACI Name
2562 HOST_ACI_NAME="LDAP_Naming_Services_host_shadow_write"
2563
2564 # Search for ACI_NAME
2565 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_hostwrite_aci 2>&1"
2566 ${GREP} "${HOST_ACI_NAME}" ${TMPDIR}/chk_hostwrite_aci > /dev/null 2>&1
2567 if [ $? -eq 0 ]; then
2568 MSG="Host ACI ${HOST_ACI_NAME} already exists for ${LDAP_BASEDN}."
2569 if [ $EXISTING_PROFILE -eq 1 ]; then
2570 ${ECHO} " NOT ADDED: $MSG"
2571 else
2572 ${ECHO} " ${STEP}. $MSG"
2573 STEP=`expr $STEP + 1`
2574 fi
2575 return 0
2576 fi
2577
2578 # Create the tmp file to add.
2579 ( cat <<EOF
2580 dn: ${LDAP_BASEDN}
2581 changetype: modify
2582 add: aci
2583 aci: (target="ldap:///${LDAP_BASEDN}")(targetattr="shadowLastChange||shadowMin||shadowMax||shadowWarning||shadowInactive||shadowExpire||shadowFlag||userPassword||loginShell||homeDirectory||gecos")(version 3.0; acl ${HOST_ACI_NAME}; allow (write,compare,read,search) authmethod="sasl GSSAPI" and userdn = "ldap:///cn=*+ipHostNumber=*,ou=Hosts,${LDAP_BASEDN}";)
2584 EOF
2585 ) > ${TMPDIR}/host_read_write
2586
2587 # Add the entry.
2588 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/host_read_write ${VERB}"
2589 if [ $? -ne 0 ]; then
2590 ${ECHO} " ERROR: Allow Host Principal to write shadow data failed!"
2591 cleanup
2592 exit 1
2593 fi
2594
2595 ${RM} -f ${TMPDIR}/host_read_write
2596 MSG="Give host principal read/write permission for shadow."
2597 if [ $EXISTING_PROFILE -eq 1 ]; then
2598 ${ECHO} " ACI SET: $MSG"
2599 else
2600 ${ECHO} " ${STEP}. $MSG"
2601 STEP=`expr $STEP + 1`
2602 fi
2603 }
2604
2605 #
2606 # Set up shadow update
2607 #
2608 setup_shadow_update() {
2609 [ $DEBUG -eq 1 ] && ${ECHO} "In setup_shadow_update()"
2610
2611 # get content of the profile
2612 PROFILE_OUT=${TMPDIR}/prof_tmpfile
2613 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${LDAP_PROFILE_NAME},ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" > $PROFILE_OUT 2>&1"
2614 ${GREP} -i cn $PROFILE_OUT >/dev/null 2>&1
2615 if [ $? -ne 0 ]; then
2616 [ $DEBUG -eq 1 ] && ${ECHO} "Profile ${LDAP_PROFILE_NAME} does not exist"
2617 ${RM} ${PROFILE_OUT}
2618 return
2619 fi
2620
2621 # Search to see if authenticationMethod has 'GSSAPI' and
2622 # credentialLevel has 'self'. If so, ask to use the
2623 # host principal for shadow update
2624 if [ $GSSAPI_AUTH_MAY_BE_USED -eq 1 ]; then
2625 if ${GREP} authenticationMethod $PROFILE_OUT | ${GREP} GSSAPI >/dev/null 2>&1
2626 then
2627 if ${GREP} credentialLevel $PROFILE_OUT | ${GREP} self >/dev/null 2>&1
2628 then
2629 NEED_HOSTACL=1
2630 fi
2631 fi
2632 ${RM} ${PROFILE_OUT}
2633 [ $DEBUG -eq 1 ] && ${ECHO} "NEED_HOSTACL = $NEED_HOSTACL"
2634
2635 if [ $NEED_HOSTACL -eq 1 ]; then
2636 MSG="Use host principal for shadow data update (y/n/h)?"
2637 get_confirm "$MSG" "y" "use_host_principal_help"
2638 if [ $? -eq 1 ]; then
2639 delete_proxy_read_pw
2640 allow_host_read_write_shadow
2641 deny_non_host_shadow_access
2642 ${ECHO} ""
2643 ${ECHO} " Shadow update has been enabled."
2644 else
2645 ${ECHO} ""
2646 ${ECHO} " Shadow update may not work."
2647 fi
2648 return
2649 fi
2650 fi
2651
2652 MSG="Add the administrator identity (y/n/h)?"
2653 get_confirm "$MSG" "y" "add_admin_cred_help"
2654 if [ $? -eq 1 ]; then
2655 get_adminDN
2656 get_admin_pw
2657 add_admin
2658 delete_proxy_read_pw
2659 allow_admin_read_write_shadow
2660 deny_non_admin_shadow_access
2661 ${ECHO} ""
2662 ${ECHO} " Shadow update has been enabled."
2663 return
2664 fi
2665
2666 ${ECHO} " No administrator identity specified, shadow update may not work."
2667 }
2668
2669
2670 #
2671 # prompt_config_info(): This function prompts the user for the config
2672 # info that is not specified in the input file.
2673 #
2674 prompt_config_info()
2675 {
2676 [ $DEBUG -eq 1 ] && ${ECHO} "In prompt_config_info()"
2677
2678 # Prompt for iDS server name.
2679 get_ids_server
2680
2681 # Prompt for iDS port number.
2682 get_ids_port
2683
2684 # Check iDS version for compatibility.
2685 chk_ids_version
2686
2687 # Check if the server supports the VLV.
2688 chk_vlv_indexes
2689
2690 # Get the Directory manager DN and passwd.
2691 get_dirmgr_dn
2692 get_dirmgr_pw
2693
2694 #
2695 # LDAP CLIENT PROFILE SPECIFIC INFORMATION.
2696 # (i.e. The fields that show up in the profile.)
2697 #
2698 get_domain "domain_help"
2699
2700 get_basedn
2701
2702 gssapi_setup
2703
2704 get_profile_name
2705
2706 if [ "$LDAP_ENABLE_SHADOW_UPDATE" = "TRUE" ];then
2707 setup_shadow_update
2708 cleanup
2709 exit 0
2710 fi
2711
2712 get_srv_list
2713 get_pref_srv
2714 get_search_scope
2715
2716 # If cred is "anonymous", make auth == "none"
2717 get_cred_level
2718 if [ "$LDAP_CRED_LEVEL" != "anonymous" ]; then
2719 get_auth
2720 fi
2721
2722 get_followref
2723
2724 # Query user about timelimt.
2725 get_confirm "Do you want to modify the server timelimit value (y/n/h)?" "n" "tlim_help"
2726 NEED_TIME=$?
2727 [ $NEED_TIME -eq 1 ] && get_timelimit
2728
2729 # Query user about sizelimit.
2730 get_confirm "Do you want to modify the server sizelimit value (y/n/h)?" "n" "slim_help"
2731 NEED_SIZE=$?
2732 [ $NEED_SIZE -eq 1 ] && get_sizelimit
2733
2734 # Does the user want to store passwords in crypt format?
2735 get_want_crypt
2736
2737 # Prompt for any Service Authentication Methods?
2738 get_confirm "Do you want to setup a Service Authentication Methods (y/n/h)?" "n" "srvauth_help"
2739 if [ $? -eq 1 ]; then
2740 # Does the user want to set Service Authentication Method for pam_ldap?
2741 get_confirm "Do you want to setup a Service Auth. Method for \"pam_ldap\" (y/n/h)?" "n" "pam_ldap_help"
2742 NEED_SRVAUTH_PAM=$?
2743 [ $NEED_SRVAUTH_PAM -eq 1 ] && get_srv_authMethod_pam
2744
2745 # Does the user want to set Service Authentication Method for keyserv?
2746 get_confirm "Do you want to setup a Service Auth. Method for \"keyserv\" (y/n/h)?" "n" "keyserv_help"
2747 NEED_SRVAUTH_KEY=$?
2748 [ $NEED_SRVAUTH_KEY -eq 1 ] && get_srv_authMethod_key
2749
2750 # Does the user want to set Service Authentication Method for passwd-cmd?
2751 get_confirm "Do you want to setup a Service Auth. Method for \"passwd-cmd\" (y/n/h)?" "n" "passwd-cmd_help"
2752 NEED_SRVAUTH_CMD=$?
2753 [ $NEED_SRVAUTH_CMD -eq 1 ] && get_srv_authMethod_cmd
2754 fi
2755
2756
2757 # Get Timeouts
2758 get_srch_time
2759 get_prof_ttl
2760 get_bind_limit
2761
2762 # Ask whether to enable shadow update
2763 get_want_shadow_update
2764
2765 # Reset the sdd_file and prompt user for SSD. Will use menus
2766 # to build an SSD File.
2767 reset_ssd_file
2768 prompt_ssd
2769
2770 # Display FULL debugging info.
2771 disp_full_debug
2772
2773 # Extra blank line to separate prompt lines from steps.
2774 ${ECHO} " "
2775 }
2776
2777
2778 ######################################################################
2779 # FUNCTIONS FOR display_summary() START HERE.
2780 ######################################################################
2781
2782
2783 #
2784 # get_proxyagent(): Get the proxyagent DN.
2785 #
2786 get_proxyagent()
2787 {
2788 LDAP_PROXYAGENT="cn=proxyagent,ou=profile,${LDAP_BASEDN}" # default
2789 get_ans "Enter DN for proxy agent:" "$LDAP_PROXYAGENT"
2790 LDAP_PROXYAGENT=$ANS
2791 }
2792
2793
2794 #
2795 # get_proxy_pw(): Get the proxyagent passwd.
2796 #
2797 get_proxy_pw()
2798 {
2799 get_passwd "Enter passwd for proxyagent:"
2800 LDAP_PROXYAGENT_CRED=$ANS
2801 }
2802
2803 #
2804 # display_summary(): Display a summary of values entered and let the
2805 # user modify values at will.
2806 #
2807 display_summary()
2808 {
2809 [ $DEBUG -eq 1 ] && ${ECHO} "In display_summary()"
2810
2811 # Create lookup table for function names. First entry is dummy for
2812 # shift.
2813 TBL1="dummy"
2814 TBL2="get_domain get_basedn get_profile_name"
2815 TBL3="get_srv_list get_pref_srv get_search_scope get_cred_level"
2816 TBL4="get_auth get_followref"
2817 TBL5="get_timelimit get_sizelimit get_want_crypt"
2818 TBL6="get_srv_authMethod_pam get_srv_authMethod_key get_srv_authMethod_cmd"
2819 TBL7="get_srch_time get_prof_ttl get_bind_limit"
2820 TBL8="get_want_shadow_update"
2821 TBL9="prompt_ssd"
2822 FUNC_TBL="$TBL1 $TBL2 $TBL3 $TBL4 $TBL5 $TBL6 $TBL7 $TBL8 $TBL9"
2823
2824 # Since menu prompt string is long, set here.
2825 _MENU_PROMPT="Enter config value to change: (1-20 0=commit changes)"
2826
2827 # Infinite loop. Test for 0, and break in loop.
2828 while :
2829 do
2830 # Display menu and get value in range.
2831 display_msg summary_menu
2832 get_menu_choice "${_MENU_PROMPT}" "0" "20" "0"
2833 _CH=$MN_CH
2834
2835 # Make sure where not exiting.
2836 if [ $_CH -eq 0 ]; then
2837 break # Break out of loop if 0 selected.
2838 fi
2839
2840 # Call appropriate function from function table.
2841 set $FUNC_TBL
2842 shift $_CH
2843 $1 # Call the appropriate function.
2844 done
2845
2846 # If cred level is still see if user wants a change?
2847 if ${ECHO} "$LDAP_CRED_LEVEL" | ${GREP} "proxy" > /dev/null 2>&1
2848 then
2849 if [ "$LDAP_AUTHMETHOD" != "none" ]; then
2850 NEED_PROXY=1 # I assume integer test is faster?
2851 get_proxyagent
2852 get_proxy_pw
2853 else
2854 ${ECHO} "WARNING: Since Authentication method is 'none'."
2855 ${ECHO} " Credential level will be set to 'anonymous'."
2856 LDAP_CRED_LEVEL="anonymous"
2857 fi
2858 fi
2859
2860 # If shadow update is enabled, set up administrator credential
2861 if [ "$LDAP_ENABLE_SHADOW_UPDATE" = "TRUE" ]; then
2862 NEED_ADMIN=1
2863 if ${ECHO} "$LDAP_CRED_LEVEL" | ${GREP} "self" > /dev/null 2>&1; then
2864 if ${ECHO} "$LDAP_AUTHMETHOD" | ${GREP} "GSSAPI" > /dev/null 2>&1; then
2865 NEED_HOSTACL=1
2866 NEED_ADMIN=0
2867 fi
2868 fi
2869 [ $DEBUG -eq 1 ] && ${ECHO} "NEED_HOSTACL = $NEED_HOSTACL"
2870 [ $DEBUG -eq 1 ] && ${ECHO} "NEED_ADMIN = $NEED_ADMIN"
2871 if [ $NEED_ADMIN -eq 1 ]; then
2872 get_adminDN
2873 get_admin_pw
2874 fi
2875 fi
2876
2877 # Display FULL debugging info.
2878 disp_full_debug
2879
2880 # Final confirmation message. (ARE YOU SURE!)
2881 ${ECHO} " "
2882 get_confirm_nodef "WARNING: About to start committing changes. (y=continue, n=EXIT)"
2883 if [ $? -eq 0 ]; then
2884 ${ECHO} "Terminating setup without making changes at users request."
2885 cleanup
2886 exit 1
2887 fi
2888
2889 # Print newline
2890 ${ECHO} " "
2891 }
2892
2893
2894 #
2895 # create_config_file(): Write config data to config file specified.
2896 #
2897 create_config_file()
2898 {
2899 [ $DEBUG -eq 1 ] && ${ECHO} "In create_config_file()"
2900
2901 # If output file exists, delete it.
2902 [ -f $OUTPUT_FILE ] && rm $OUTPUT_FILE
2903
2904 # Create output file.
2905 cat > $OUTPUT_FILE <<EOF
2906 #!/bin/sh
2907 # $OUTPUT_FILE - This file contains configuration information for
2908 # Native LDAP. Use the idsconfig tool to load it.
2909 #
2910 # WARNING: This file was generated by idsconfig, and is intended to
2911 # be loaded by idsconfig as is. DO NOT EDIT THIS FILE!
2912 #
2913 IDS_SERVER="$IDS_SERVER"
2914 IDS_PORT=$IDS_PORT
2915 IDS_TIMELIMIT=$IDS_TIMELIMIT
2916 IDS_SIZELIMIT=$IDS_SIZELIMIT
2917 LDAP_ROOTDN="$LDAP_ROOTDN"
2918 LDAP_ROOTPWD=$LDAP_ROOTPWD
2919 LDAP_DOMAIN="$LDAP_DOMAIN"
2920 LDAP_SUFFIX="$LDAP_SUFFIX"
2921 GSSAPI_ENABLE=$GSSAPI_ENABLE
2922 LDAP_KRB_REALM="$LDAP_KRB_REALM"
2923
2924 # Internal program variables that need to be set.
2925 NEED_PROXY=$NEED_PROXY
2926 NEED_TIME=$NEED_TIME
2927 NEED_SIZE=$NEED_SIZE
2928 NEED_CRYPT=$NEED_CRYPT
2929 NEED_ADMIN=$NEED_ADMIN
2930 NEED_HOSTACL=$NEED_HOSTACL
2931 EXISTING_PROFILE=$EXISTING_PROFILE
2932
2933 # LDAP PROFILE related defaults
2934 LDAP_PROFILE_NAME="$LDAP_PROFILE_NAME"
2935 DEL_OLD_PROFILE=1
2936 LDAP_BASEDN="$LDAP_BASEDN"
2937 LDAP_SERVER_LIST="$LDAP_SERVER_LIST"
2938 LDAP_AUTHMETHOD="$LDAP_AUTHMETHOD"
2939 LDAP_FOLLOWREF=$LDAP_FOLLOWREF
2940 LDAP_SEARCH_SCOPE="$LDAP_SEARCH_SCOPE"
2941 NEED_SRVAUTH_PAM=$NEED_SRVAUTH_PAM
2942 NEED_SRVAUTH_KEY=$NEED_SRVAUTH_KEY
2943 NEED_SRVAUTH_CMD=$NEED_SRVAUTH_CMD
2944 LDAP_SRV_AUTHMETHOD_PAM="$LDAP_SRV_AUTHMETHOD_PAM"
2945 LDAP_SRV_AUTHMETHOD_KEY="$LDAP_SRV_AUTHMETHOD_KEY"
2946 LDAP_SRV_AUTHMETHOD_CMD="$LDAP_SRV_AUTHMETHOD_CMD"
2947 LDAP_SEARCH_TIME_LIMIT=$LDAP_SEARCH_TIME_LIMIT
2948 LDAP_PREF_SRVLIST="$LDAP_PREF_SRVLIST"
2949 LDAP_PROFILE_TTL=$LDAP_PROFILE_TTL
2950 LDAP_CRED_LEVEL="$LDAP_CRED_LEVEL"
2951 LDAP_BIND_LIMIT=$LDAP_BIND_LIMIT
2952
2953 # Proxy Agent
2954 LDAP_PROXYAGENT="$LDAP_PROXYAGENT"
2955 LDAP_PROXYAGENT_CRED=$LDAP_PROXYAGENT_CRED
2956
2957 # enableShadowUpdate flag and Administrator credential
2958 LDAP_ENABLE_SHADOW_UPDATE=$LDAP_ENABLE_SHADOW_UPDATE
2959 LDAP_ADMINDN="$LDAP_ADMINDN"
2960 LDAP_ADMIN_CRED=$LDAP_ADMIN_CRED
2961
2962 # Export all the variables (just in case)
2963 export IDS_HOME IDS_PORT LDAP_ROOTDN LDAP_ROOTPWD LDAP_SERVER_LIST LDAP_BASEDN
2964 export LDAP_DOMAIN LDAP_SUFFIX LDAP_PROXYAGENT LDAP_PROXYAGENT_CRED
2965 export NEED_PROXY
2966 export LDAP_ENABLE_SHADOW_UPDATE LDAP_ADMINDN LDAP_ADMIN_CRED
2967 export NEED_ADMIN NEED_HOSTACL EXISTING_PROFILE
2968 export LDAP_PROFILE_NAME LDAP_BASEDN LDAP_SERVER_LIST
2969 export LDAP_AUTHMETHOD LDAP_FOLLOWREF LDAP_SEARCH_SCOPE LDAP_SEARCH_TIME_LIMIT
2970 export LDAP_PREF_SRVLIST LDAP_PROFILE_TTL LDAP_CRED_LEVEL LDAP_BIND_LIMIT
2971 export NEED_SRVAUTH_PAM NEED_SRVAUTH_KEY NEED_SRVAUTH_CMD
2972 export LDAP_SRV_AUTHMETHOD_PAM LDAP_SRV_AUTHMETHOD_KEY LDAP_SRV_AUTHMETHOD_CMD
2973 export LDAP_SERV_SRCH_DES SSD_FILE GSSAPI_ENABLE LDAP_KRB_REALM
2974
2975 # Service Search Descriptors start here if present:
2976 EOF
2977 # Add service search descriptors.
2978 ssd_2_config "${OUTPUT_FILE}"
2979
2980 # Add LDAP suffix preferences
2981 print_suffix_config >> "${OUTPUT_FILE}"
2982
2983 # Add the end of FILE tag.
2984 ${ECHO} "" >> ${OUTPUT_FILE}
2985 ${ECHO} "# End of $OUTPUT_FILE" >> ${OUTPUT_FILE}
2986 }
2987
2988
2989 #
2990 # chk_vlv_indexes(): Do ldapsearch to see if server supports VLV.
2991 #
2992 chk_vlv_indexes()
2993 {
2994 # Do ldapsearch to see if server supports VLV.
2995 ${LDAPSEARCH} ${SERVER_ARGS} -b "" -s base "objectclass=*" > ${TMPDIR}/checkVLV 2>&1
2996 eval "${GREP} 2.16.840.1.113730.3.4.9 ${TMPDIR}/checkVLV ${VERB}"
2997 if [ $? -ne 0 ]; then
2998 ${ECHO} "ERROR: VLV is not supported on LDAP server!"
2999 cleanup
3000 exit 1
3001 fi
3002 [ $DEBUG -eq 1 ] && ${ECHO} " VLV controls found on LDAP server."
3003 }
3004
3005 #
3006 # get_backend(): this function gets the relevant backend
3007 # (database) for LDAP_BASED.
3008 # Description: set IDS_DATABASE; exit on failure.
3009 # Prerequisite: LDAP_BASEDN and LDAP_SUFFIX are
3010 # valid.
3011 #
3012 # backend is retrieved from suffixes and subsuffixes
3013 # defined under "cn=mapping tree,cn=config". The
3014 # nsslapd-state attribute of these suffixes entries
3015 # is filled with either Backend, Disabled or referrals
3016 # related values. We only want those that have a true
3017 # backend database to select the relevant backend.
3018 #
3019 get_backend()
3020 {
3021 [ $DEBUG -eq 1 ] && ${ECHO} "In get_backend()"
3022
3023 cur_suffix=${LDAP_BASEDN}
3024 prev_suffix=
3025 IDS_DATABASE=
3026 while [ "${cur_suffix}" != "${prev_suffix}" ]
3027 do
3028 [ $DEBUG -eq 1 ] && ${ECHO} "testing LDAP suffix: ${cur_suffix}"
3029 eval "${LDAPSEARCH} ${LDAP_ARGS} " \
3030 "-b \"cn=\\\"${cur_suffix}\\\",cn=mapping tree,cn=config\" " \
3031 "-s base nsslapd-state=Backend nsslapd-backend 2>&1 " \
3032 "| ${GREP} 'nsslapd-backend=' " \
3033 "> ${TMPDIR}/ids_database_name 2>&1"
3034 NUM_DBS=`wc -l ${TMPDIR}/ids_database_name | awk '{print $1}'`
3035 case ${NUM_DBS} in
3036 0) # not a suffix, or suffix not activated; try next
3037 prev_suffix=${cur_suffix}
3038 cur_suffix=`${ECHO} ${cur_suffix} | cut -f2- -d','`
3039 ;;
3040 1) # suffix found; get database name
3041 IDS_DATABASE=`cat ${TMPDIR}/ids_database_name | cut -d= -f2`
3042 ;;
3043 *) # can not handle more than one database per suffix
3044 ${ECHO} "ERROR: More than one database is configured "
3045 ${ECHO} " for $LDAP_SUFFIX!"
3046 ${ECHO} " $PROG can not configure suffixes where "
3047 ${ECHO} " more than one database is used for one suffix."
3048 cleanup
3049 exit 1
3050 ;;
3051 esac
3052 if [ -n "${IDS_DATABASE}" ]; then
3053 break
3054 fi
3055 done
3056
3057 if [ -z "${IDS_DATABASE}" ]; then
3058 # should not happen, since LDAP_BASEDN is supposed to be valid
3059 ${ECHO} "Could not find a valid backend for ${LDAP_BASEDN}."
3060 ${ECHO} "Exiting."
3061 cleanup
3062 exit 1
3063 fi
3064
3065 [ $DEBUG -eq 1 ] && ${ECHO} "IDS_DATABASE: ${IDS_DATABASE}"
3066 }
3067
3068 #
3069 # validate_suffix(): This function validates ${LDAP_SUFFIX}
3070 # THIS FUNCTION IS FOR THE LOAD CONFIG FILE OPTION.
3071 #
3072 validate_suffix()
3073 {
3074 [ $DEBUG -eq 1 ] && ${ECHO} "In validate_suffix()"
3075
3076 # Check LDAP_SUFFIX is not null
3077 if [ -z "${LDAP_SUFFIX}" ]; then
3078 ${ECHO} "Invalid suffix (null suffix)"
3079 cleanup
3080 exit 1
3081 fi
3082
3083 # Check LDAP_SUFFIX and LDAP_BASEDN are consistent
3084 # Convert to lower case for basename.
3085 format_string "${LDAP_BASEDN}"
3086 LOWER_BASEDN="${FMT_STR}"
3087 format_string "${LDAP_SUFFIX}"
3088 LOWER_SUFFIX="${FMT_STR}"
3089
3090 [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_BASEDN: ${LOWER_BASEDN}"
3091 [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_SUFFIX: ${LOWER_SUFFIX}"
3092
3093 if [ "${LOWER_BASEDN}" != "${LOWER_SUFFIX}" ]; then
3094 sub_basedn=`basename "${LOWER_BASEDN}" "${LOWER_SUFFIX}"`
3095 if [ "$sub_basedn" = "${LOWER_BASEDN}" ]; then
3096 ${ECHO} "Invalid suffix ${LOWER_SUFFIX}"
3097 ${ECHO} "for Base DN ${LOWER_BASEDN}"
3098 cleanup
3099 exit 1
3100 fi
3101 fi
3102
3103 # Check LDAP_SUFFIX does exist
3104 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_SUFFIX}\" -s base \"objectclass=*\" > ${TMPDIR}/checkSuffix 2>&1" && return 0
3105
3106 # Well, suffix does not exist, try to prepare create it ...
3107 NEED_CREATE_SUFFIX=1
3108 prep_create_sfx_entry ||
3109 {
3110 cleanup
3111 exit 1
3112 }
3113 [ -n "${NEED_CREATE_BACKEND}" ] &&
3114 {
3115 # try to use id attr value of the suffix as a database name
3116 IDS_DATABASE=${_VAL}
3117 prep_create_sfx_backend
3118 case $? in
3119 1) # cann't use the name we want, so we can either exit or use
3120 # some another available name - doing the last ...
3121 IDS_DATABASE=${IDS_DATABASE_AVAIL}
3122 ;;
3123 2) # unable to determine database name
3124 cleanup
3125 exit 1
3126 ;;
3127 esac
3128 }
3129
3130 [ $DEBUG -eq 1 ] && ${ECHO} "Suffix $LDAP_SUFFIX, Database $IDS_DATABASE"
3131 }
3132
3133 #
3134 # validate_info(): This function validates the basic info collected
3135 # So that some problems are caught right away.
3136 # THIS FUNCTION IS FOR THE LOAD CONFIG FILE OPTION.
3137 #
3138 validate_info()
3139 {
3140 [ $DEBUG -eq 1 ] && ${ECHO} "In validate_info()"
3141
3142 # Set SERVER_ARGS, AUTH_ARGS, and LDAP_ARGS for the config file.
3143 SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}"
3144 AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}"
3145 LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}"
3146 export SERVER_ARGS
3147
3148 # Check the Root DN and Root DN passwd.
3149 # Use eval instead of $EVAL because not part of setup. (validate)
3150 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" > ${TMPDIR}/checkDN 2>&1"
3151 if [ $? -ne 0 ]; then
3152 eval "${GREP} credential ${TMPDIR}/checkDN ${VERB}"
3153 if [ $? -eq 0 ]; then
3154 ${ECHO} "ERROR: Root DN passwd is invalid."
3155 else
3156 ${ECHO} "ERROR2: Invalid Root DN <${LDAP_ROOTDN}>."
3157 fi
3158 cleanup
3159 exit 1
3160 fi
3161 [ $DEBUG -eq 1 ] && ${ECHO} " RootDN ... OK"
3162 [ $DEBUG -eq 1 ] && ${ECHO} " RootDN passwd ... OK"
3163
3164 # Check if the server supports the VLV.
3165 chk_vlv_indexes
3166 [ $DEBUG -eq 1 ] && ${ECHO} " VLV indexes ... OK"
3167
3168 # Check LDAP suffix
3169 validate_suffix
3170 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP suffix ... OK"
3171 }
3172
3173 #
3174 # format_string(): take a string as argument and set FMT_STR
3175 # to be the same string formatted as follow:
3176 # - only lower case characters
3177 # - no unnecessary spaces around , and =
3178 #
3179 format_string()
3180 {
3181 FMT_STR=`${ECHO} "$1" | tr '[A-Z]' '[a-z]' |
3182 sed -e 's/[ ]*,[ ]*/,/g' -e 's/[ ]*=[ ]*/=/g'`
3183 }
3184
3185 #
3186 # prepare for the suffix entry creation
3187 #
3188 # input : LDAP_BASEDN, LDAP_SUFFIX - base dn and suffix;
3189 # in/out : LDAP_SUFFIX_OBJ, LDAP_SUFFIX_ACI - initially may come from config.
3190 # output : NEED_CREATE_BACKEND - backend for this suffix needs to be created;
3191 # _RDN, _ATT, _VAL - suffix's RDN, id attribute name and its value.
3192 # return : 0 - success, otherwise error.
3193 #
3194 prep_create_sfx_entry()
3195 {
3196 [ $DEBUG -eq 1 ] && ${ECHO} "In prep_create_sfx_entry()"
3197
3198 # check whether suffix corresponds to base dn
3199 format_string "${LDAP_BASEDN}"
3200 ${ECHO} ",${FMT_STR}" | ${GREP} ",${LDAP_SUFFIX}$" >/dev/null 2>&1 ||
3201 {
3202 display_msg sfx_not_suitable
3203 return 1
3204 }
3205
3206 # parse LDAP_SUFFIX
3207 _RDN=`${ECHO} "${LDAP_SUFFIX}" | cut -d, -f1`
3208 _ATT=`${ECHO} "${_RDN}" | cut -d= -f1`
3209 _VAL=`${ECHO} "${_RDN}" | cut -d= -f2-`
3210
3211 # find out an objectclass for suffix entry if it is not defined yet
3212 [ -z "${LDAP_SUFFIX_OBJ}" ] &&
3213 {
3214 get_objectclass ${_ATT}
3215 [ -z "${_ATTR_NAME}" ] &&
3216 {
3217 display_msg obj_not_found
3218 return 1
3219 }
3220 LDAP_SUFFIX_OBJ=${_ATTR_NAME}
3221 }
3222 [ $DEBUG -eq 1 ] && ${ECHO} "Suffix entry object is ${LDAP_SUFFIX_OBJ}"
3223
3224 # find out an aci for suffix entry if it is not defined yet
3225 [ -z "${LDAP_SUFFIX_ACI}" ] &&
3226 {
3227 # set Directory Server default aci
3228 LDAP_SUFFIX_ACI=`cat <<EOF
3229 aci: (targetattr != "userPassword || passwordHistory || passwordExpirationTime
3230 || passwordExpWarned || passwordRetryCount || retryCountResetTime ||
3231 accountUnlockTime || passwordAllowChangeTime")
3232 (
3233 version 3.0;
3234 acl "Anonymous access";
3235 allow (read, search, compare) userdn = "ldap:///anyone";
3236 )
3237 aci: (targetattr != "nsroledn || aci || nsLookThroughLimit || nsSizeLimit ||
3238 nsTimeLimit || nsIdleTimeout || passwordPolicySubentry ||
3239 passwordExpirationTime || passwordExpWarned || passwordRetryCount ||
3240 retryCountResetTime || accountUnlockTime || passwordHistory ||
3241 passwordAllowChangeTime")
3242 (
3243 version 3.0;
3244 acl "Allow self entry modification except for some attributes";
3245 allow (write) userdn = "ldap:///self";
3246 )
3247 aci: (targetattr = "*")
3248 (
3249 version 3.0;
3250 acl "Configuration Administrator";
3251 allow (all) userdn = "ldap:///uid=admin,ou=Administrators,
3252 ou=TopologyManagement,o=NetscapeRoot";
3253 )
3254 aci: (targetattr ="*")
3255 (
3256 version 3.0;
3257 acl "Configuration Administrators Group";
3258 allow (all) groupdn = "ldap:///cn=Configuration Administrators,
3259 ou=Groups,ou=TopologyManagement,o=NetscapeRoot";
3260 )
3261 EOF
3262 `
3263 }
3264 [ $DEBUG -eq 1 ] && cat <<EOF
3265 DEBUG: ACI for ${LDAP_SUFFIX} is
3266 ${LDAP_SUFFIX_ACI}
3267 EOF
3268
3269 NEED_CREATE_BACKEND=
3270
3271 # check the suffix mapping tree ...
3272 # if mapping exists, suffix should work, otherwise DS inconsistent
3273 # NOTE: -b 'cn=mapping tree,cn=config' -s one 'cn=\"$1\"' won't work
3274 # in case of 'cn' value in LDAP is not quoted by '"',
3275 # -b 'cn=\"$1\",cn=mapping tree,cn=config' works in all cases
3276 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \
3277 -b 'cn=\"${LDAP_SUFFIX}\",cn=mapping tree,cn=config' \
3278 -s base 'objectclass=*' dn ${VERB}" &&
3279 {
3280 [ $DEBUG -eq 1 ] && ${ECHO} "Suffix mapping already exists"
3281 # get_backend() either gets IDS_DATABASE or exits
3282 get_backend
3283 return 0
3284 }
3285
3286 # no suffix mapping, just in case check ldbm backends consistency -
3287 # there are must be NO any databases pointing to LDAP_SUFFIX
3288 [ -n "`${EVAL} \"${LDAPSEARCH} ${LDAP_ARGS} \
3289 -b 'cn=ldbm database,cn=plugins,cn=config' \
3290 -s one 'nsslapd-suffix=${LDAP_SUFFIX}' dn\" 2>/dev/null`" ] &&
3291 {
3292 display_msg sfx_config_incons
3293 return 1
3294 }
3295
3296 # ok, no suffix mapping, no ldbm database
3297 [ $DEBUG -eq 1 ] && ${ECHO} "DEBUG: backend needs to be created ..."
3298 NEED_CREATE_BACKEND=1
3299 return 0
3300 }
3301
3302 #
3303 # prepare for the suffix backend creation
3304 #
3305 # input : IDS_DATABASE - requested ldbm db name (must be not null)
3306 # in/out : IDS_DATABASE_AVAIL - available ldbm db name
3307 # return : 0 - ldbm db name ok
3308 # 1 - IDS_DATABASE exists,
3309 # so IDS_DATABASE_AVAIL contains available name
3310 # 2 - unable to find any available name
3311 #
3312 prep_create_sfx_backend()
3313 {
3314 [ $DEBUG -eq 1 ] && ${ECHO} "In prep_create_sfx_backend()"
3315
3316 # check if requested name available
3317 [ "${IDS_DATABASE}" = "${IDS_DATABASE_AVAIL}" ] && return 0
3318
3319 # get the list of database names start with a requested name
3320 _LDBM_DBS=`${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \
3321 -b 'cn=ldbm database,cn=plugins,cn=config' \
3322 -s one 'cn=${IDS_DATABASE}*' cn"` 2>/dev/null
3323
3324 # find available db name based on a requested name
3325 _i=""; _i_MAX=10
3326 while [ ${_i:-0} -lt ${_i_MAX} ]
3327 do
3328 _name="${IDS_DATABASE}${_i}"
3329 ${ECHO} "${_LDBM_DBS}" | ${GREP} -i "^cn=${_name}$" >/dev/null 2>&1 ||
3330 {
3331 IDS_DATABASE_AVAIL="${_name}"
3332 break
3333 }
3334 _i=`expr ${_i:-0} + 1`
3335 done
3336
3337 [ "${IDS_DATABASE}" = "${IDS_DATABASE_AVAIL}" ] && return 0
3338
3339 [ -n "${IDS_DATABASE_AVAIL}" ] &&
3340 {
3341 display_msg ldbm_db_exist
3342 return 1
3343 }
3344
3345 display_msg unable_find_db_name
3346 return 2
3347 }
3348
3349 #
3350 # add suffix if needed,
3351 # suffix entry and backend MUST be prepared by
3352 # prep_create_sfx_entry and prep_create_sfx_backend correspondingly
3353 #
3354 # input : NEED_CREATE_SUFFIX, LDAP_SUFFIX, LDAP_SUFFIX_OBJ, _ATT, _VAL
3355 # LDAP_SUFFIX_ACI, NEED_CREATE_BACKEND, IDS_DATABASE
3356 # return : 0 - suffix successfully created, otherwise error occured
3357 #
3358 add_suffix()
3359 {
3360 [ $DEBUG -eq 1 ] && ${ECHO} "In add_suffix()"
3361
3362 [ -n "${NEED_CREATE_SUFFIX}" ] || return 0
3363
3364 [ -n "${NEED_CREATE_BACKEND}" ] &&
3365 {
3366 ${EVAL} "${LDAPADD} ${LDAP_ARGS} ${VERB}" <<EOF
3367 dn: cn="${LDAP_SUFFIX}",cn=mapping tree,cn=config
3368 objectclass: top
3369 objectclass: extensibleObject
3370 objectclass: nsMappingTree
3371 cn: ${LDAP_SUFFIX}
3372 nsslapd-state: backend
3373 nsslapd-backend: ${IDS_DATABASE}
3374
3375 dn: cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config
3376 objectclass: top
3377 objectclass: extensibleObject
3378 objectclass: nsBackendInstance
3379 cn: ${IDS_DATABASE}
3380 nsslapd-suffix: ${LDAP_SUFFIX}
3381 EOF
3382 [ $? -ne 0 ] &&
3383 {
3384 display_msg create_ldbm_db_error
3385 return 1
3386 }
3387
3388 ${ECHO} " ${STEP}. Database ${IDS_DATABASE} successfully created"
3389 STEP=`expr $STEP + 1`
3390 }
3391
3392 ${EVAL} "${LDAPADD} ${LDAP_ARGS} ${VERB}" <<EOF
3393 dn: ${LDAP_SUFFIX}
3394 objectclass: ${LDAP_SUFFIX_OBJ}
3395 ${_ATT}: ${_VAL}
3396 ${LDAP_SUFFIX_ACI}
3397 EOF
3398 [ $? -ne 0 ] &&
3399 {
3400 display_msg create_suffix_entry_error
3401 return 1
3402 }
3403
3404 ${ECHO} " ${STEP}. Suffix ${LDAP_SUFFIX} successfully created"
3405 STEP=`expr $STEP + 1`
3406 return 0
3407 }
3408
3409 #
3410 # interactively get suffix and related info from a user
3411 #
3412 # input : LDAP_BASEDN - Base DN
3413 # output : LDAP_SUFFIX - Suffix, _ATT, _VAL - id attribute and its value;
3414 # LDAP_SUFFIX_OBJ, LDAP_SUFFIX_ACI - objectclass and aci;
3415 # NEED_CREATE_BACKEND - tells whether backend needs to be created;
3416 # IDS_DATABASE - prepared ldbm db name
3417 # return : 0 - user gave a correct suffix
3418 # 1 - suffix given by user cann't be created
3419 #
3420 get_suffix()
3421 {
3422 [ $DEBUG -eq 1 ] && ${ECHO} "In get_suffix()"
3423
3424 while :
3425 do
3426 get_ans "Enter suffix to be created (b=back/h=help):" ${LDAP_BASEDN}
3427 case "${ANS}" in
3428 [Hh] | Help | help | \? ) display_msg create_suffix_help ;;
3429 [Bb] | Back | back | \< ) return 1 ;;
3430 * )
3431 format_string "${ANS}"
3432 LDAP_SUFFIX=${FMT_STR}
3433 prep_create_sfx_entry || continue
3434
3435 [ -n "${NEED_CREATE_BACKEND}" ] &&
3436 {
3437 IDS_DATABASE_AVAIL= # reset the available db name
3438
3439 reenter_suffix=
3440 while :
3441 do
3442 get_ans "Enter ldbm database name (b=back/h=help):" \
3443 ${IDS_DATABASE_AVAIL:-${_VAL}}
3444 case "${ANS}" in
3445 [Hh] | \? ) display_msg enter_ldbm_db_help ;;
3446 [Bb] | \< ) reenter_suffix=1; break ;;
3447 * )
3448 IDS_DATABASE="${ANS}"
3449 prep_create_sfx_backend && break
3450 esac
3451 done
3452 [ -n "${reenter_suffix}" ] && continue
3453
3454 [ $DEBUG -eq 1 ] && cat <<EOF
3455 DEBUG: backend name for suffix ${LDAP_SUFFIX} will be ${IDS_DATABASE}
3456 EOF
3457 }
3458
3459 # eventually everything is prepared
3460 return 0
3461 ;;
3462 esac
3463 done
3464 }
3465
3466 #
3467 # print out a script which sets LDAP suffix related preferences
3468 #
3469 print_suffix_config()
3470 {
3471 cat <<EOF2
3472 # LDAP suffix related preferences used only if needed
3473 IDS_DATABASE="${IDS_DATABASE}"
3474 LDAP_SUFFIX_OBJ="$LDAP_SUFFIX_OBJ"
3475 LDAP_SUFFIX_ACI=\`cat <<EOF
3476 ${LDAP_SUFFIX_ACI}
3477 EOF
3478 \`
3479 export IDS_DATABASE LDAP_SUFFIX_OBJ LDAP_SUFFIX_ACI
3480 EOF2
3481 }
3482
3483 #
3484 # check_basedn_suffix(): check that there is an existing
3485 # valid suffix to hold current base DN
3486 # return:
3487 # 0: valid suffix found or new one should be created,
3488 # NEED_CREATE_SUFFIX flag actually indicates that
3489 # 1: some error occures
3490 #
3491 check_basedn_suffix()
3492 {
3493 [ $DEBUG -eq 1 ] && ${ECHO} "In check_basedn_suffix()"
3494
3495 NEED_CREATE_SUFFIX=
3496
3497 # find out existing suffixes
3498 discover_serv_suffix
3499
3500 ${ECHO} " Validating LDAP Base DN and Suffix ..."
3501
3502 # check that LDAP Base DN might be added
3503 cur_ldap_entry=${LDAP_BASEDN}
3504 prev_ldap_entry=
3505 while [ "${cur_ldap_entry}" != "${prev_ldap_entry}" ]
3506 do
3507 [ $DEBUG -eq 1 ] && ${ECHO} "testing LDAP entry: ${cur_ldap_entry}"
3508 ${LDAPSEARCH} ${SERVER_ARGS} -b "${cur_ldap_entry}" \
3509 -s one "objectclass=*" > /dev/null 2>&1
3510 if [ $? -eq 0 ]; then
3511 break
3512 else
3513 prev_ldap_entry=${cur_ldap_entry}
3514 cur_ldap_entry=`${ECHO} ${cur_ldap_entry} | cut -f2- -d','`
3515 fi
3516 done
3517
3518 if [ "${cur_ldap_entry}" = "${prev_ldap_entry}" ]; then
3519 ${ECHO} " No valid suffixes were found for Base DN ${LDAP_BASEDN}"
3520
3521 NEED_CREATE_SUFFIX=1
3522 return 0
3523
3524 else
3525 [ $DEBUG -eq 1 ] && ${ECHO} "found valid LDAP entry: ${cur_ldap_entry}"
3526
3527 # Now looking for relevant suffix for this entry.
3528 # LDAP_SUFFIX will then be used to add necessary
3529 # base objects. See add_base_objects().
3530 format_string "${cur_ldap_entry}"
3531 lower_entry="${FMT_STR}"
3532 [ $DEBUG -eq 1 ] && ${ECHO} "final suffix list: ${LDAP_SUFFIX_LIST}"
3533 oIFS=$IFS
3534 [ $DEBUG -eq 1 ] && ${ECHO} "setting IFS to new line"
3535 IFS='
3536 '
3537 for suff in ${LDAP_SUFFIX_LIST}
3538 do
3539 [ $DEBUG -eq 1 ] && ${ECHO} "testing suffix: ${suff}"
3540 format_string "${suff}"
3541 lower_suff="${FMT_STR}"
3542 if [ "${lower_entry}" = "${lower_suff}" ]; then
3543 LDAP_SUFFIX="${suff}"
3544 break
3545 else
3546 dcstmp=`basename "${lower_entry}" "${lower_suff}"`
3547 if [ "${dcstmp}" = "${lower_entry}" ]; then
3548 # invalid suffix, try next one
3549 continue
3550 else
3551 # valid suffix found
3552 LDAP_SUFFIX="${suff}"
3553 break
3554 fi
3555 fi
3556 done
3557 [ $DEBUG -eq 1 ] && ${ECHO} "setting IFS to original value"
3558 IFS=$oIFS
3559
3560 [ $DEBUG -eq 1 ] && ${ECHO} "LDAP_SUFFIX: ${LDAP_SUFFIX}"
3561
3562 if [ -z "${LDAP_SUFFIX}" ]; then
3563 # should not happen, since we found the entry
3564 ${ECHO} "Could not find a valid suffix for ${LDAP_BASEDN}."
3565 ${ECHO} "Exiting."
3566 return 1
3567 fi
3568
3569 # Getting relevant database (backend)
3570 # IDS_DATABASE will then be used to create indexes.
3571 get_backend
3572
3573 return 0
3574 fi
3575 }
3576
3577 #
3578 # discover_serv_suffix(): This function queries the server to find
3579 # suffixes available
3580 # return: 0: OK, suffix found
3581 # 1: suffix not determined
3582 discover_serv_suffix()
3583 {
3584 [ $DEBUG -eq 1 ] && ${ECHO} "In discover_serv_suffix()"
3585
3586 # Search the server for the TOP of the TREE.
3587 ${LDAPSEARCH} ${SERVER_ARGS} -b "" -s base "objectclass=*" > ${TMPDIR}/checkTOP 2>&1
3588 ${GREP} -i namingcontexts ${TMPDIR}/checkTOP | \
3589 ${GREP} -i -v NetscapeRoot > ${TMPDIR}/treeTOP
3590 NUM_TOP=`wc -l ${TMPDIR}/treeTOP | awk '{print $1}'`
3591 case $NUM_TOP in
3592 0)
3593 [ $DEBUG -eq 1 ] && ${ECHO} "DEBUG: No suffix found in LDAP tree"
3594 return 1
3595 ;;
3596 *) # build the list of suffixes; take out 'namingContexts=' in
3597 # each line of ${TMPDIR}/treeTOP
3598 LDAP_SUFFIX_LIST=`cat ${TMPDIR}/treeTOP |
3599 awk '{ printf("%s\n",substr($0,16,length-15)) }'`
3600 ;;
3601 esac
3602
3603 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SUFFIX_LIST = $LDAP_SUFFIX_LIST"
3604 return 0
3605 }
3606
3607
3608 #
3609 # modify_cn(): Change the cn from MUST to MAY in ipNetwork.
3610 #
3611 modify_cn()
3612 {
3613 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_cn()"
3614
3615 ( cat <<EOF
3616 dn: cn=schema
3617 changetype: modify
3618 add: objectclasses
3619 objectclasses: ( 1.3.6.1.1.1.2.7 NAME 'ipNetwork' DESC 'Standard LDAP objectclass' SUP top STRUCTURAL MUST ipNetworkNumber MAY ( ipNetmaskNumber $ manager $ cn $ l $ description ) X-ORIGIN 'RFC 2307' )
3620 EOF
3621 ) > ${TMPDIR}/ipNetwork_cn
3622
3623 # Modify the cn for ipNetwork.
3624 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ipNetwork_cn ${VERB}"
3625 if [ $? -ne 0 ]; then
3626 ${ECHO} " ERROR: update of cn for ipNetwork failed!"
3627 cleanup
3628 exit 1
3629 fi
3630 }
3631
3632
3633 # modify_timelimit(): Modify timelimit to user value.
3634 modify_timelimit()
3635 {
3636 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_timelimit()"
3637
3638 # Here doc to modify timelimit.
3639 ( cat <<EOF
3640 dn: cn=config
3641 changetype: modify
3642 replace: nsslapd-timelimit
3643 nsslapd-timelimit: ${IDS_TIMELIMIT}
3644 EOF
3645 ) > ${TMPDIR}/ids_timelimit
3646
3647 # Add the entry.
3648 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_timelimit ${VERB}"
3649 if [ $? -ne 0 ]; then
3650 ${ECHO} " ERROR: update of nsslapd-timelimit failed!"
3651 cleanup
3652 exit 1
3653 fi
3654
3655 # Display messages for modifications made in patch.
3656 ${ECHO} " ${STEP}. Changed timelimit to ${IDS_TIMELIMIT} in cn=config."
3657 STEP=`expr $STEP + 1`
3658 }
3659
3660
3661 # modify_sizelimit(): Modify sizelimit to user value.
3662 modify_sizelimit()
3663 {
3664 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_sizelimit()"
3665
3666 # Here doc to modify sizelimit.
3667 ( cat <<EOF
3668 dn: cn=config
3669 changetype: modify
3670 replace: nsslapd-sizelimit
3671 nsslapd-sizelimit: ${IDS_SIZELIMIT}
3672 EOF
3673 ) > ${TMPDIR}/ids_sizelimit
3674
3675 # Add the entry.
3676 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_sizelimit ${VERB}"
3677 if [ $? -ne 0 ]; then
3678 ${ECHO} " ERROR: update of nsslapd-sizelimit failed!"
3679 cleanup
3680 exit 1
3681 fi
3682
3683 # Display messages for modifications made in patch.
3684 ${ECHO} " ${STEP}. Changed sizelimit to ${IDS_SIZELIMIT} in cn=config."
3685 STEP=`expr $STEP + 1`
3686 }
3687
3688
3689 # modify_pwd_crypt(): Modify the passwd storage scheme to support CRYPT.
3690 modify_pwd_crypt()
3691 {
3692 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_pwd_crypt()"
3693
3694 # Here doc to modify passwordstoragescheme.
3695 # IDS 5.2 moved passwordchangesceme off to a new data structure.
3696 if [ $IDS_MAJVER -le 5 ] && [ $IDS_MINVER -le 1 ]; then
3697 ( cat <<EOF
3698 dn: cn=config
3699 changetype: modify
3700 replace: passwordstoragescheme
3701 passwordstoragescheme: crypt
3702 EOF
3703 ) > ${TMPDIR}/ids_crypt
3704 else
3705 ( cat <<EOF
3706 dn: cn=Password Policy,cn=config
3707 changetype: modify
3708 replace: passwordstoragescheme
3709 passwordstoragescheme: crypt
3710 EOF
3711 ) > ${TMPDIR}/ids_crypt
3712 fi
3713
3714 # Add the entry.
3715 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_crypt ${VERB}"
3716 if [ $? -ne 0 ]; then
3717 ${ECHO} " ERROR: update of passwordstoragescheme failed!"
3718 cleanup
3719 exit 1
3720 fi
3721
3722 # Display messages for modifications made in patch.
3723 ${ECHO} " ${STEP}. Changed passwordstoragescheme to \"crypt\" in cn=config."
3724 STEP=`expr $STEP + 1`
3725 }
3726
3727
3728 #
3729 # add_eq_indexes(): Add indexes to improve search performance.
3730 #
3731 add_eq_indexes()
3732 {
3733 [ $DEBUG -eq 1 ] && ${ECHO} "In add_eq_indexes()"
3734
3735 # Set eq indexes to add.
3736 _INDEXES="uidNumber ipNetworkNumber gidnumber oncrpcnumber automountKey"
3737
3738 if [ -z "${IDS_DATABASE}" ]; then
3739 get_backend
3740 fi
3741
3742 # Set _EXT to use as shortcut.
3743 _EXT="cn=index,cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config"
3744
3745 # Display message to id current step.
3746 ${ECHO} " ${STEP}. Processing eq,pres indexes:"
3747 STEP=`expr $STEP + 1`
3748
3749 # For loop to create indexes.
3750 for i in ${_INDEXES}; do
3751 [ $DEBUG -eq 1 ] && ${ECHO} " Adding index for ${i}"
3752
3753 # Check if entry exists first, if so, skip to next.
3754 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${i},${_EXT}\" -s base \
3755 \"objectclass=*\" > /dev/null 2>&1"
3756 if [ $? -eq 0 ]; then
3757 # Display index skipped.
3758 ${ECHO} " ${i} (eq,pres) skipped already exists"
3759 continue
3760 fi
3761
3762 # Here doc to create LDIF.
3763 ( cat <<EOF
3764 dn: cn=${i},${_EXT}
3765 objectClass: top
3766 objectClass: nsIndex
3767 cn: ${i}
3768 nsSystemIndex: false
3769 nsIndexType: pres
3770 nsIndexType: eq
3771 EOF
3772 ) > ${TMPDIR}/index_${i}
3773
3774 # Add the index.
3775 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/index_${i} ${VERB}"
3776 if [ $? -ne 0 ]; then
3777 ${ECHO} " ERROR: Adding EQ,PRES index for ${i} failed!"
3778 cleanup
3779 exit 1
3780 fi
3781
3782 # Build date for task name.
3783 _YR=`date '+%y'`
3784 _MN=`date '+%m'`
3785 _DY=`date '+%d'`
3786 _H=`date '+%H'`
3787 _M=`date '+%M'`
3788 _S=`date '+%S'`
3789
3790 # Build task name
3791 TASKNAME="${i}_${_YR}_${_MN}_${_DY}_${_H}_${_M}_${_S}"
3792
3793 # Build the task entry to add.
3794 ( cat <<EOF
3795 dn: cn=${TASKNAME}, cn=index, cn=tasks, cn=config
3796 changetype: add
3797 objectclass: top
3798 objectclass: extensibleObject
3799 cn: ${TASKNAME}
3800 nsInstance: ${IDS_DATABASE}
3801 nsIndexAttribute: ${i}
3802 EOF
3803 ) > ${TMPDIR}/task_${i}
3804
3805 # Add the task.
3806 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/task_${i} ${VERB}"
3807 if [ $? -ne 0 ]; then
3808 ${ECHO} " ERROR: Adding task for ${i} failed!"
3809 cleanup
3810 exit 1
3811 fi
3812
3813 # Wait for task to finish, display current status.
3814 while :
3815 do
3816 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \
3817 -b \"cn=${TASKNAME}, cn=index, cn=tasks, cn=config\" -s base \
3818 \"objectclass=*\" nstaskstatus > \"${TMPDIR}/istask_${i}\" 2>&1"
3819 ${GREP} "${TASKNAME}" "${TMPDIR}/istask_${i}" > /dev/null 2>&1
3820 if [ $? -ne 0 ]; then
3821 break
3822 fi
3823 TASK_STATUS=`${GREP} -i nstaskstatus "${TMPDIR}/istask_${i}" |
3824 head -1 | cut -d: -f2`
3825 ${ECHO} " ${i} (eq,pres) $TASK_STATUS \r\c"
3826 ${ECHO} "$TASK_STATUS" | ${GREP} "Finished" > /dev/null 2>&1
3827 if [ $? -eq 0 ]; then
3828 break
3829 fi
3830 sleep 2
3831 done
3832
3833 # Print newline because of \c.
3834 ${ECHO} " "
3835 done
3836 }
3837
3838
3839 #
3840 # add_sub_indexes(): Add indexes to improve search performance.
3841 #
3842 add_sub_indexes()
3843 {
3844 [ $DEBUG -eq 1 ] && ${ECHO} "In add_sub_indexes()"
3845
3846 # Set eq indexes to add.
3847 _INDEXES="ipHostNumber membernisnetgroup nisnetgrouptriple"
3848
3849 # Set _EXT to use as shortcut.
3850 _EXT="cn=index,cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config"
3851
3852
3853 # Display message to id current step.
3854 ${ECHO} " ${STEP}. Processing eq,pres,sub indexes:"
3855 STEP=`expr $STEP + 1`
3856
3857 # For loop to create indexes.
3858 for i in ${_INDEXES}; do
3859 [ $DEBUG -eq 1 ] && ${ECHO} " Adding index for ${i}"
3860
3861 # Check if entry exists first, if so, skip to next.
3862 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${i},${_EXT}\" \
3863 -s base \"objectclass=*\" > /dev/null 2>&1"
3864 if [ $? -eq 0 ]; then
3865 # Display index skipped.
3866 ${ECHO} " ${i} (eq,pres,sub) skipped already exists"
3867 continue
3868 fi
3869
3870 # Here doc to create LDIF.
3871 ( cat <<EOF
3872 dn: cn=${i},${_EXT}
3873 objectClass: top
3874 objectClass: nsIndex
3875 cn: ${i}
3876 nsSystemIndex: false
3877 nsIndexType: pres
3878 nsIndexType: eq
3879 nsIndexType: sub
3880 EOF
3881 ) > ${TMPDIR}/index_${i}
3882
3883 # Add the index.
3884 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/index_${i} ${VERB}"
3885 if [ $? -ne 0 ]; then
3886 ${ECHO} " ERROR: Adding EQ,PRES,SUB index for ${i} failed!"
3887 cleanup
3888 exit 1
3889 fi
3890
3891 # Build date for task name.
3892 _YR=`date '+%y'`
3893 _MN=`date '+%m'`
3894 _DY=`date '+%d'`
3895 _H=`date '+%H'`
3896 _M=`date '+%M'`
3897 _S=`date '+%S'`
3898
3899 # Build task name
3900 TASKNAME="${i}_${_YR}_${_MN}_${_DY}_${_H}_${_M}_${_S}"
3901
3902 # Build the task entry to add.
3903 ( cat <<EOF
3904 dn: cn=${TASKNAME}, cn=index, cn=tasks, cn=config
3905 changetype: add
3906 objectclass: top
3907 objectclass: extensibleObject
3908 cn: ${TASKNAME}
3909 nsInstance: ${IDS_DATABASE}
3910 nsIndexAttribute: ${i}
3911 EOF
3912 ) > ${TMPDIR}/task_${i}
3913
3914 # Add the task.
3915 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/task_${i} ${VERB}"
3916 if [ $? -ne 0 ]; then
3917 ${ECHO} " ERROR: Adding task for ${i} failed!"
3918 cleanup
3919 exit 1
3920 fi
3921
3922 # Wait for task to finish, display current status.
3923 while :
3924 do
3925 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \
3926 -b \"cn=${TASKNAME}, cn=index, cn=tasks, cn=config\" -s base \
3927 \"objectclass=*\" nstaskstatus > \"${TMPDIR}/istask_${i}\" 2>&1"
3928 ${GREP} "${TASKNAME}" "${TMPDIR}/istask_${i}" > /dev/null 2>&1
3929 if [ $? -ne 0 ]; then
3930 break
3931 fi
3932 TASK_STATUS=`${GREP} -i nstaskstatus "${TMPDIR}/istask_${i}" |
3933 head -1 | cut -d: -f2`
3934 ${ECHO} " ${i} (eq,pres,sub) $TASK_STATUS \r\c"
3935 ${ECHO} "$TASK_STATUS" | ${GREP} "Finished" > /dev/null 2>&1
3936 if [ $? -eq 0 ]; then
3937 break
3938 fi
3939 sleep 2
3940 done
3941
3942 # Print newline because of \c.
3943 ${ECHO} " "
3944 done
3945 }
3946
3947
3948 #
3949 # add_vlv_indexes(): Add VLV indexes to improve search performance.
3950 #
3951 add_vlv_indexes()
3952 {
3953 [ $DEBUG -eq 1 ] && ${ECHO} "In add_vlv_indexes()"
3954
3955 # Set eq indexes to add.
3956 # Note semi colon separators because some filters contain colons
3957 _INDEX1="${LDAP_DOMAIN}.getgrent;${LDAP_DOMAIN}_group_vlv_index;ou=group;objectClass=posixGroup"
3958 _INDEX2="${LDAP_DOMAIN}.gethostent;${LDAP_DOMAIN}_hosts_vlv_index;ou=hosts;objectClass=ipHost"
3959 _INDEX3="${LDAP_DOMAIN}.getnetent;${LDAP_DOMAIN}_networks_vlv_index;ou=networks;objectClass=ipNetwork"
3960 _INDEX4="${LDAP_DOMAIN}.getpwent;${LDAP_DOMAIN}_passwd_vlv_index;ou=people;objectClass=posixAccount"
3961 _INDEX5="${LDAP_DOMAIN}.getrpcent;${LDAP_DOMAIN}_rpc_vlv_index;ou=rpc;objectClass=oncRpc"
3962 _INDEX6="${LDAP_DOMAIN}.getspent;${LDAP_DOMAIN}_shadow_vlv_index;ou=people;objectClass=shadowAccount"
3963
3964 # Indexes added during NIS to LDAP transition
3965 _INDEX7="${LDAP_DOMAIN}.getauhoent;${LDAP_DOMAIN}_auho_vlv_index;automountmapname=auto_home;objectClass=automount"
3966 _INDEX8="${LDAP_DOMAIN}.getsoluent;${LDAP_DOMAIN}_solu_vlv_index;ou=people;objectClass=SolarisUserAttr"
3967 _INDEX10="${LDAP_DOMAIN}.getauthent;${LDAP_DOMAIN}_auth_vlv_index;ou=SolarisAuthAttr;objectClass=SolarisAuthAttr"
3968 _INDEX11="${LDAP_DOMAIN}.getexecent;${LDAP_DOMAIN}_exec_vlv_index;ou=SolarisProfAttr;&(objectClass=SolarisExecAttr)(SolarisKernelSecurityPolicy=*)"
3969 _INDEX12="${LDAP_DOMAIN}.getprofent;${LDAP_DOMAIN}_prof_vlv_index;ou=SolarisProfAttr;&(objectClass=SolarisProfAttr)(SolarisAttrLongDesc=*)"
3970 _INDEX13="${LDAP_DOMAIN}.getmailent;${LDAP_DOMAIN}_mail_vlv_index;ou=aliases;objectClass=mailGroup"
3971 _INDEX14="${LDAP_DOMAIN}.getbootent;${LDAP_DOMAIN}__boot_vlv_index;ou=ethers;&(objectClass=bootableDevice)(bootParameter=*)"
3972 _INDEX15="${LDAP_DOMAIN}.getethent;${LDAP_DOMAIN}_ethers_vlv_index;ou=ethers;&(objectClass=ieee802Device)(macAddress=*)"
3973 _INDEX16="${LDAP_DOMAIN}.getngrpent;${LDAP_DOMAIN}_netgroup_vlv_index;ou=netgroup;objectClass=nisNetgroup"
3974 _INDEX17="${LDAP_DOMAIN}.getipnent;${LDAP_DOMAIN}_ipn_vlv_index;ou=networks;&(objectClass=ipNetwork)(cn=*)"
3975 _INDEX18="${LDAP_DOMAIN}.getmaskent;${LDAP_DOMAIN}_mask_vlv_index;ou=networks;&(objectClass=ipNetwork)(ipNetmaskNumber=*)"
3976 _INDEX19="${LDAP_DOMAIN}.getprent;${LDAP_DOMAIN}_pr_vlv_index;ou=printers;objectClass=printerService"
3977 _INDEX20="${LDAP_DOMAIN}.getip4ent;${LDAP_DOMAIN}_ip4_vlv_index;ou=hosts;&(objectClass=ipHost)(ipHostNumber=*.*)"
3978 _INDEX21="${LDAP_DOMAIN}.getip6ent;${LDAP_DOMAIN}_ip6_vlv_index;ou=hosts;&(objectClass=ipHost)(ipHostNumber=*:*)"
3979
3980 _INDEXES="$_INDEX1 $_INDEX2 $_INDEX3 $_INDEX4 $_INDEX5 $_INDEX6 $_INDEX7 $_INDEX8 $_INDEX9 $_INDEX10 $_INDEX11 $_INDEX12 $_INDEX13 $_INDEX14 $_INDEX15 $_INDEX16 $_INDEX17 $_INDEX18 $_INDEX19 $_INDEX20 $_INDEX21 "
3981
3982
3983 # Set _EXT to use as shortcut.
3984 _EXT="cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config"
3985
3986
3987 # Display message to id current step.
3988 ${ECHO} " ${STEP}. Processing VLV indexes:"
3989 STEP=`expr $STEP + 1`
3990
3991 # Reset temp file for vlvindex commands.
3992 [ -f ${TMPDIR}/ds5_vlvindex_list ] && rm ${TMPDIR}/ds5_vlvindex_list
3993 touch ${TMPDIR}/ds5_vlvindex_list
3994 [ -f ${TMPDIR}/ds6_vlvindex_list ] && rm ${TMPDIR}/ds6_vlvindex_list
3995 touch ${TMPDIR}/ds6_vlvindex_list
3996
3997 # Get the instance name from iDS server.
3998 _INSTANCE="<server-instance>" # Default to old output.
3999
4000 eval "${LDAPSEARCH} -v ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-instancedir | ${GREP} 'nsslapd-instancedir=' | cut -d'=' -f2- > ${TMPDIR}/instance_name 2>&1"
4001
4002 ${GREP} "slapd-" ${TMPDIR}/instance_name > /dev/null 2>&1 # Check if seems right?
4003 if [ $? -eq 0 ]; then # If success, grab name after "slapd-".
4004 _INST_DIR=`cat ${TMPDIR}/instance_name`
4005 _INSTANCE=`basename "${_INST_DIR}" | cut -d'-' -f2-`
4006 fi
4007
4008 # For loop to create indexes.
4009 for p in ${_INDEXES}; do
4010 [ $DEBUG -eq 1 ] && ${ECHO} " Adding index for ${i}"
4011
4012 # Break p (pair) into i and j parts.
4013 i=`${ECHO} $p | cut -d';' -f1`
4014 j=`${ECHO} $p | cut -d';' -f2`
4015 k=`${ECHO} $p | cut -d';' -f3`
4016 m=`${ECHO} $p | cut -d';' -f4`
4017
4018 # Set _jEXT to use as shortcut.
4019 _jEXT="cn=${j},${_EXT}"
4020
4021 # Check if entry exists first, if so, skip to next.
4022 ${LDAPSEARCH} ${SERVER_ARGS} -b "cn=${i},${_jEXT}" -s base "objectclass=*" > /dev/null 2>&1
4023 if [ $? -eq 0 ]; then
4024 # Display index skipped.
4025 ${ECHO} " ${i} vlv_index skipped already exists"
4026 continue
4027 fi
4028
4029 # Compute the VLV Scope from the LDAP_SEARCH_SCOPE.
4030 # NOTE: A value of "base (0)" does not make sense.
4031 case "$LDAP_SEARCH_SCOPE" in
4032 sub) VLV_SCOPE="2" ;;
4033 *) VLV_SCOPE="1" ;;
4034 esac
4035
4036 # Here doc to create LDIF.
4037 ( cat <<EOF
4038 dn: ${_jEXT}
4039 objectClass: top
4040 objectClass: vlvSearch
4041 cn: ${j}
4042 vlvbase: ${k},${LDAP_BASEDN}
4043 vlvscope: ${VLV_SCOPE}
4044 vlvfilter: (${m})
4045 aci: (target="ldap:///${_jEXT}")(targetattr="*")(version 3.0; acl "Config";allow(read,search,compare)userdn="ldap:///anyone";)
4046
4047 dn: cn=${i},${_jEXT}
4048 cn: ${i}
4049 vlvSort: cn uid
4050 objectclass: top
4051 objectclass: vlvIndex
4052 EOF
4053 ) > ${TMPDIR}/vlv_index_${i}
4054
4055 # Add the index.
4056 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/vlv_index_${i} ${VERB}"
4057 if [ $? -ne 0 ]; then
4058 ${ECHO} " ERROR: Adding VLV index for ${i} failed!"
4059 cleanup
4060 exit 1
4061 fi
4062
4063 # Print message that index was created.
4064 ${ECHO} " ${i} vlv_index Entry created"
4065
4066 # Add command to list of vlvindex commands to run.
4067 ${ECHO} " directoryserver -s ${_INSTANCE} vlvindex -n ${IDS_DATABASE} -T ${i}" >> ${TMPDIR}/ds5_vlvindex_list
4068 ${ECHO} " <install-path>/bin/dsadm reindex -l -t ${i} <directory-instance-path> ${LDAP_SUFFIX}" >> ${TMPDIR}/ds6_vlvindex_list
4069 done
4070 }
4071
4072
4073 #
4074 # display_vlv_cmds(): Display VLV index commands to run on server.
4075 #
4076 display_vlv_cmds()
4077 {
4078 if [ -s "${TMPDIR}/ds5_vlvindex_list" -o \
4079 -s "${TMPDIR}/ds6_vlvindex_list" ]; then
4080 display_msg display_vlv_list
4081 fi
4082
4083 if [ -s "${TMPDIR}/ds5_vlvindex_list" ]; then
4084 cat ${TMPDIR}/ds5_vlvindex_list
4085 fi
4086
4087 cat << EOF
4088
4089
4090 EOF
4091
4092 if [ -s "${TMPDIR}/ds6_vlvindex_list" ]; then
4093 cat ${TMPDIR}/ds6_vlvindex_list
4094 fi
4095 }
4096
4097 #
4098 # keep_backward_compatibility(): Modify schema for the backward compatibility if
4099 # there are the incompatible attributes already
4100 #
4101 keep_backward_compatibility()
4102 {
4103 ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \
4104 \"objectclass=*\" attributeTypes | ${GREP} -i memberGid-oid ${VERB}"
4105 if [ $? -eq 0 ]; then
4106 ${SED} -e 's/1\.3\.6\.1\.4\.1\.42\.2\.27\.5\.1\.30\ /memberGid-oid\ /' \
4107 ${TMPDIR}/schema_attr > ${TMPDIR}/schema_attr.new
4108 ${MV} ${TMPDIR}/schema_attr.new ${TMPDIR}/schema_attr
4109 fi
4110
4111 ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \
4112 \"objectclass=*\" attributeTypes | ${GREP} -i rfc822mailMember-oid \
4113 ${VERB}"
4114 if [ $? -eq 0 ]; then
4115 ${SED} -e \
4116 's/1\.3\.6\.1\.4\.1\.42\.2\.27\.2\.1\.15\ /rfc822mailMember-oid\ /' \
4117 ${TMPDIR}/schema_attr > ${TMPDIR}/schema_attr.new
4118 ${MV} ${TMPDIR}/schema_attr.new ${TMPDIR}/schema_attr
4119 fi
4120 }
4121
4122 #
4123 # update_schema_attr(): Update Schema to support Naming.
4124 #
4125 update_schema_attr()
4126 {
4127 [ $DEBUG -eq 1 ] && ${ECHO} "In update_schema_attr()"
4128
4129 ( cat <<EOF
4130 dn: cn=schema
4131 changetype: modify
4132 add: attributetypes
4133 attributetypes: ( 1.3.6.1.1.1.1.28 NAME 'nisPublickey' DESC 'NIS public key' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4134 attributetypes: ( 1.3.6.1.1.1.1.29 NAME 'nisSecretkey' DESC 'NIS secret key' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4135 attributetypes: ( 1.3.6.1.1.1.1.30 NAME 'nisDomain' DESC 'NIS domain' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4136 attributetypes: ( 1.3.6.1.1.1.1.31 NAME 'automountMapName' DESC 'automount Map Name' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4137 attributetypes: ( 1.3.6.1.1.1.1.32 NAME 'automountKey' DESC 'automount Key Value' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4138 attributetypes: ( 1.3.6.1.1.1.1.33 NAME 'automountInformation' DESC 'automount information' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4139 attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.12 NAME 'nisNetIdUser' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4140 attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.13 NAME 'nisNetIdGroup' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4141 attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.14 NAME 'nisNetIdHost' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4142 attributetypes: ( 1.3.6.1.4.1.42.2.27.2.1.15 NAME 'rfc822mailMember' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4143 attributetypes: ( 2.16.840.1.113730.3.1.30 NAME 'mgrpRFC822MailMember' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4144 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.15 NAME 'SolarisLDAPServers' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4145 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.16 NAME 'SolarisSearchBaseDN' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE )
4146 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.17 NAME 'SolarisCacheTTL' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4147 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.18 NAME 'SolarisBindDN' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE )
4148 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.19 NAME 'SolarisBindPassword' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4149 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.20 NAME 'SolarisAuthMethod' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4150 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.21 NAME 'SolarisTransportSecurity' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4151 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.22 NAME 'SolarisCertificatePath' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4152 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.23 NAME 'SolarisCertificatePassword' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4153 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.24 NAME 'SolarisDataSearchDN' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4154 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.25 NAME 'SolarisSearchScope' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4155 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.26 NAME 'SolarisSearchTimeLimit' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4156 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.27 NAME 'SolarisPreferredServer' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4157 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.28 NAME 'SolarisPreferredServerOnly' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4158 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.29 NAME 'SolarisSearchReferral' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4159 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.4 NAME 'SolarisAttrKeyValue' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4160 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.5 NAME 'SolarisAuditAlways' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4161 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.6 NAME 'SolarisAuditNever' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4162 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.7 NAME 'SolarisAttrShortDesc' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4163 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.8 NAME 'SolarisAttrLongDesc' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4164 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.9 NAME 'SolarisKernelSecurityPolicy' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4165 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.10 NAME 'SolarisProfileType' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4166 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.11 NAME 'SolarisProfileId' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4167 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.12 NAME 'SolarisUserQualifier' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4168 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.13 NAME 'SolarisAttrReserved1' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4169 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.14 NAME 'SolarisAttrReserved2' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4170 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.1 NAME 'SolarisProjectID' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4171 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.2 NAME 'SolarisProjectName' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4172 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.3 NAME 'SolarisProjectAttr' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4173 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.30 NAME 'memberGid' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4174 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.0 NAME 'defaultServerList' DESC 'Default LDAP server host address used by a DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4175 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.1 NAME 'defaultSearchBase' DESC 'Default LDAP base DN used by a DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE )
4176 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.2 NAME 'preferredServerList' DESC 'Preferred LDAP server host addresses to be used by a DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4177 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.3 NAME 'searchTimeLimit' DESC 'Maximum time in seconds a DUA should allow for a search to complete' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4178 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.4 NAME 'bindTimeLimit' DESC 'Maximum time in seconds a DUA should allow for the bind operation to complete' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4179 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.5 NAME 'followReferrals' DESC 'Tells DUA if it should follow referrals returned by a DSA search result' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4180 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.6 NAME 'authenticationMethod' DESC 'A keystring which identifies the type of authentication method used to contact the DSA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4181 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.7 NAME 'profileTTL' DESC 'Time to live before a client DUA should re-read this configuration profile' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4182 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.14 NAME 'serviceSearchDescriptor' DESC 'LDAP search descriptor list used by Naming-DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4183 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.9 NAME 'attributeMap' DESC 'Attribute mappings used by a Naming-DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4184 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.10 NAME 'credentialLevel' DESC 'Identifies type of credentials a DUA should use when binding to the LDAP server' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4185 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.11 NAME 'objectclassMap' DESC 'Objectclass mappings used by a Naming-DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4186 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.12 NAME 'defaultSearchScope' DESC 'Default search scope used by a DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4187 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.13 NAME 'serviceCredentialLevel' DESC 'Search scope used by a service of the DUA' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4188 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.15 NAME 'serviceAuthenticationMethod' DESC 'Authentication Method used by a service of the DUA' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4189 attributetypes: ( 1.3.18.0.2.4.1140 NAME 'printer-uri' DESC 'A URI supported by this printer. This URI SHOULD be used as a relative distinguished name (RDN). If printer-xri-supported is implemented, then this URI value MUST be listed in a member value of printer-xri-supported.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4190 attributetypes: ( 1.3.18.0.2.4.1107 NAME 'printer-xri-supported' DESC 'The unordered list of XRI (extended resource identifiers) supported by this printer. Each member of the list consists of a URI (uniform resource identifier) followed by optional authentication and security metaparameters.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4191 attributetypes: ( 1.3.18.0.2.4.1135 NAME 'printer-name' DESC 'The site-specific administrative name of this printer, more end-user friendly than a URI.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE )
4192 attributetypes: ( 1.3.18.0.2.4.1119 NAME 'printer-natural-language-configured' DESC 'The configured language in which error and status messages will be generated (by default) by this printer. Also, a possible language for printer string attributes set by operator, system administrator, or manufacturer. Also, the (declared) language of the "printer-name", "printer-location", "printer-info", and "printer-make-and-model" attributes of this printer. For example: "en-us" (US English) or "fr-fr" (French in France) Legal values of language tags conform to [RFC3066] "Tags for the Identification of Languages".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE )
4193 attributetypes: ( 1.3.18.0.2.4.1136 NAME 'printer-location' DESC 'Identifies the location of the printer. This could include things like: "in Room 123A", "second floor of building XYZ".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE )
4194 attributetypes: ( 1.3.18.0.2.4.1139 NAME 'printer-info' DESC 'Identifies the descriptive information about this printer. This could include things like: "This printer can be used for printing color transparencies for HR presentations", or "Out of courtesy for others, please print only small (1-5 page) jobs at this printer", or even "This printer is going away on July 1, 1997, please find a new printer".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE )
4195 attributetypes: ( 1.3.18.0.2.4.1134 NAME 'printer-more-info' DESC 'A URI used to obtain more information about this specific printer. For example, this could be an HTTP type URI referencing an HTML page accessible to a Web Browser. The information obtained from this URI is intended for end user consumption.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4196 attributetypes: ( 1.3.18.0.2.4.1138 NAME 'printer-make-and-model' DESC 'Identifies the make and model of the device. The device manufacturer MAY initially populate this attribute.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE )
4197 attributetypes: ( 1.3.18.0.2.4.1133 NAME 'printer-ipp-versions-supported' DESC 'Identifies the IPP protocol version(s) that this printer supports, including major and minor versions, i.e., the version numbers for which this Printer implementation meets the conformance requirements.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} )
4198 attributetypes: ( 1.3.18.0.2.4.1132 NAME 'printer-multiple-document-jobs-supported' DESC 'Indicates whether or not the printer supports more than one document per job, i.e., more than one Send-Document or Send-Data operation with document data.' EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE )
4199 attributetypes: ( 1.3.18.0.2.4.1109 NAME 'printer-charset-configured' DESC 'The configured charset in which error and status messages will be generated (by default) by this printer. Also, a possible charset for printer string attributes set by operator, system administrator, or manufacturer. For example: "utf-8" (ISO 10646/Unicode) or "iso-8859-1" (Latin1). Legal values are defined by the IANA Registry of Coded Character Sets and the "(preferred MIME name)" SHALL be used as the tag. For coherence with IPP Model, charset tags in this attribute SHALL be lowercase normalized. This attribute SHOULD be static (time of registration) and SHOULD NOT be dynamically refreshed attributetypes: (subsequently).' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{63} SINGLE-VALUE )
4200 attributetypes: ( 1.3.18.0.2.4.1131 NAME 'printer-charset-supported' DESC 'Identifies the set of charsets supported for attribute type values of type Directory String for this directory entry. For example: "utf-8" (ISO 10646/Unicode) or "iso-8859-1" (Latin1). Legal values are defined by the IANA Registry of Coded Character Sets and the preferred MIME name.' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{63} )
4201 attributetypes: ( 1.3.18.0.2.4.1137 NAME 'printer-generated-natural-language-supported' DESC 'Identifies the natural language(s) supported for this directory entry. For example: "en-us" (US English) or "fr-fr" (French in France). Legal values conform to [RFC3066], Tags for the Identification of Languages.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{63} )
4202 attributetypes: ( 1.3.18.0.2.4.1130 NAME 'printer-document-format-supported' DESC 'The possible document formats in which data may be interpreted and printed by this printer. Legal values are MIME types come from the IANA Registry of Internet Media Types.' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} )
4203 attributetypes: ( 1.3.18.0.2.4.1129 NAME 'printer-color-supported' DESC 'Indicates whether this printer is capable of any type of color printing at all, including highlight color.' EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE )
4204 attributetypes: ( 1.3.18.0.2.4.1128 NAME 'printer-compression-supported' DESC 'Compression algorithms supported by this printer. For example: "deflate, gzip". Legal values include; "none", "deflate" attributetypes: (public domain ZIP), "gzip" (GNU ZIP), "compress" (UNIX).' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} )
4205 attributetypes: ( 1.3.18.0.2.4.1127 NAME 'printer-pages-per-minute' DESC 'The nominal number of pages per minute which may be output by this printer (e.g., a simplex or black-and-white printer). This attribute is informative, NOT a service guarantee. Typically, it is the value used in marketing literature to describe this printer.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4206 attributetypes: ( 1.3.18.0.2.4.1126 NAME 'printer-pages-per-minute-color' DESC 'The nominal number of color pages per minute which may be output by this printer (e.g., a simplex or color printer). This attribute is informative, NOT a service guarantee. Typically, it is the value used in marketing literature to describe this printer.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4207 attributetypes: ( 1.3.18.0.2.4.1125 NAME 'printer-finishings-supported' DESC 'The possible finishing operations supported by this printer. Legal values include; "none", "staple", "punch", "cover", "bind", "saddle-stitch", "edge-stitch", "staple-top-left", "staple-bottom-left", "staple-top-right", "staple-bottom-right", "edge-stitch-left", "edge-stitch-top", "edge-stitch-right", "edge-stitch-bottom", "staple-dual-left", "staple-dual-top", "staple-dual-right", "staple-dual-bottom".' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} )
4208 attributetypes: ( 1.3.18.0.2.4.1124 NAME 'printer-number-up-supported' DESC 'The possible numbers of print-stream pages to impose upon a single side of an instance of a selected medium. Legal values include; 1, 2, and 4. Implementations may support other values.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 )
4209 attributetypes: ( 1.3.18.0.2.4.1123 NAME 'printer-sides-supported' DESC 'The number of impression sides (one or two) and the two-sided impression rotations supported by this printer. Legal values include; "one-sided", "two-sided-long-edge", "two-sided-short-edge".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} )
4210 attributetypes: ( 1.3.18.0.2.4.1122 NAME 'printer-media-supported' DESC 'The standard names/types/sizes (and optional color suffixes) of the media supported by this printer. For example: "iso-a4", "envelope", or "na-letter-white". Legal values conform to ISO 10175, Document Printing Application (DPA), and any IANA registered extensions.' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} )
4211 attributetypes: ( 1.3.18.0.2.4.1117 NAME 'printer-media-local-supported' DESC 'Site-specific names of media supported by this printer, in the language in "printer-natural-language-configured". For example: "purchasing-form" (site-specific name) as opposed to (in "printer-media-supported"): "na-letter" (standard keyword from ISO 10175).' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} )
4212 attributetypes: ( 1.3.18.0.2.4.1121 NAME 'printer-resolution-supported' DESC 'List of resolutions supported for printing documents by this printer. Each resolution value is a string with 3 fields: 1) Cross feed direction resolution (positive integer), 2) Feed direction resolution (positive integer), 3) Resolution unit. Legal values are "dpi" (dots per inch) and "dpcm" (dots per centimeter). Each resolution field is delimited by ">". For example: "300> 300> dpi>".' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} )
4213 attributetypes: ( 1.3.18.0.2.4.1120 NAME 'printer-print-quality-supported' DESC 'List of print qualities supported for printing documents on this printer. For example: "draft, normal". Legal values include; "unknown", "draft", "normal", "high".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} )
4214 attributetypes: ( 1.3.18.0.2.4.1110 NAME 'printer-job-priority-supported' DESC 'Indicates the number of job priority levels supported. An IPP conformant printer which supports job priority must always support a full range of priorities from "1" to "100" (to ensure consistent behavior), therefore this attribute describes the "granularity". Legal values of this attribute are from "1" to "100".' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4215 attributetypes: ( 1.3.18.0.2.4.1118 NAME 'printer-copies-supported' DESC 'The maximum number of copies of a document that may be printed as a single job. A value of "0" indicates no maximum limit. A value of "-1" indicates unknown.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4216 attributetypes: ( 1.3.18.0.2.4.1111 NAME 'printer-job-k-octets-supported' DESC 'The maximum size in kilobytes (1,024 octets actually) incoming print job that this printer will accept. A value of "0" indicates no maximum limit. A value of "-1" indicates unknown.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4217 attributetypes: ( 1.3.18.0.2.4.1112 NAME 'printer-current-operator' DESC 'The name of the current human operator responsible for operating this printer. It is suggested that this string include information that would enable other humans to reach the operator, such as a phone number.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE )
4218 attributetypes: ( 1.3.18.0.2.4.1113 NAME 'printer-service-person' DESC 'The name of the current human service person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the service person, such as a phone number.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE )
4219 attributetypes: ( 1.3.18.0.2.4.1114 NAME 'printer-delivery-orientation-supported' DESC 'The possible delivery orientations of pages as they are printed and ejected from this printer. Legal values include; "unknown", "face-up", and "face-down".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} )
4220 attributetypes: ( 1.3.18.0.2.4.1115 NAME 'printer-stacking-order-supported' DESC 'The possible stacking order of pages as they are printed and ejected from this printer. Legal values include; "unknown", "first-to-last", "last-to-first".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} )
4221 attributetypes: ( 1.3.18.0.2.4.1116 NAME 'printer-output-features-supported' DESC 'The possible output features supported by this printer. Legal values include; "unknown", "bursting", "decollating", "page-collating", "offset-stacking".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} )
4222 attributetypes: ( 1.3.18.0.2.4.1108 NAME 'printer-aliases' DESC 'Site-specific administrative names of this printer in addition the printer name specified for printer-name.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} )
4223 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.63 NAME 'sun-printer-bsdaddr' DESC 'Sets the server, print queue destination name and whether the client generates protocol extensions. "Solaris" specifies a Solaris print server extension. The value is represented by the following value: server "," destination ", Solaris".' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4224 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.64 NAME 'sun-printer-kvp' DESC 'This attribute contains a set of key value pairs which may have meaning to the print subsystem or may be user defined. Each value is represented by the following: key "=" value.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4225 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.57 NAME 'nisplusTimeZone' DESC 'tzone column from NIS+ timezone table' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4226 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.67 NAME 'ipTnetTemplateName' DESC 'Trusted Solaris network template template_name' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4227 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.68 NAME 'ipTnetNumber' DESC 'Trusted Solaris network template ip_address' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4228 EOF
4229 ) > ${TMPDIR}/schema_attr
4230
4231 keep_backward_compatibility
4232
4233 # Add the entry.
4234 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/schema_attr ${VERB}"
4235 if [ $? -ne 0 ]; then
4236 ${ECHO} " ERROR: update of schema attributes failed!"
4237 cleanup
4238 exit 1
4239 fi
4240
4241 # Display message that schema is updated.
4242 ${ECHO} " ${STEP}. Schema attributes have been updated."
4243 STEP=`expr $STEP + 1`
4244 }
4245
4246
4247 #
4248 # update_schema_obj(): Update the schema objectclass definitions.
4249 #
4250 update_schema_obj()
4251 {
4252 [ $DEBUG -eq 1 ] && ${ECHO} "In update_schema_obj()"
4253
4254 # Add the objectclass definitions.
4255 ( cat <<EOF
4256 dn: cn=schema
4257 changetype: modify
4258 add: objectclasses
4259 objectclasses: ( 1.3.6.1.1.1.2.14 NAME 'NisKeyObject' SUP top MUST ( cn $ nisPublickey $ nisSecretkey ) MAY ( uidNumber $ description ) )
4260
4261 dn: cn=schema
4262 changetype: modify
4263 add: objectclasses
4264 objectclasses: ( 1.3.6.1.1.1.2.15 NAME 'nisDomainObject' SUP top MUST nisDomain )
4265
4266 dn: cn=schema
4267 changetype: modify
4268 add: objectclasses
4269 objectclasses: ( 1.3.6.1.1.1.2.16 NAME 'automountMap' SUP top MUST automountMapName MAY description )
4270
4271 dn: cn=schema
4272 changetype: modify
4273 add: objectclasses
4274 objectclasses: ( 1.3.6.1.1.1.2.17 NAME 'automount' SUP top MUST ( automountKey $ automountInformation ) MAY description )
4275
4276 dn: cn=schema
4277 changetype: modify
4278 add: objectclasses
4279 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.7 NAME 'SolarisNamingProfile' SUP top MUST ( cn $ SolarisLDAPservers $ SolarisSearchBaseDN ) MAY ( SolarisBindDN $ SolarisBindPassword $ SolarisAuthMethod $ SolarisTransportSecurity $ SolarisCertificatePath $ SolarisCertificatePassword $ SolarisDataSearchDN $ SolarisSearchScope $ SolarisSearchTimeLimit $ SolarisPreferredServer $ SolarisPreferredServerOnly $ SolarisCacheTTL $ SolarisSearchReferral ) )
4280
4281 dn: cn=schema
4282 changetype: modify
4283 add: objectclasses
4284 objectclasses: ( 2.16.840.1.113730.3.2.4 NAME 'mailGroup' SUP top MUST mail MAY ( cn $ mgrpRFC822MailMember ) )
4285
4286 dn: cn=schema
4287 changetype: modify
4288 add: objectclasses
4289 objectclasses: ( 1.3.6.1.4.1.42.2.27.1.2.5 NAME 'nisMailAlias' SUP top MUST cn MAY rfc822mailMember )
4290
4291 dn: cn=schema
4292 changetype: modify
4293 add: objectclasses
4294 objectclasses: ( 1.3.6.1.4.1.42.2.27.1.2.6 NAME 'nisNetId' SUP top MUST cn MAY ( nisNetIdUser $ nisNetIdGroup $ nisNetIdHost ) )
4295
4296 dn: cn=schema
4297 changetype: modify
4298 add: objectclasses
4299 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.2 NAME 'SolarisAuditUser' SUP top AUXILIARY MAY ( SolarisAuditAlways $ SolarisAuditNever ) )
4300
4301 dn: cn=schema
4302 changetype: modify
4303 add: objectclasses
4304 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.3 NAME 'SolarisUserAttr' SUP top AUXILIARY MAY ( SolarisUserQualifier $ SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrKeyValue ) )
4305
4306 dn: cn=schema
4307 changetype: modify
4308 add: objectclasses
4309 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.4 NAME 'SolarisAuthAttr' SUP top MUST cn MAY ( SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrShortDesc $ SolarisAttrLongDesc $ SolarisAttrKeyValue ) )
4310
4311 dn: cn=schema
4312 changetype: modify
4313 add: objectclasses
4314 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.5 NAME 'SolarisProfAttr' SUP top MUST cn MAY ( SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrLongDesc $ SolarisAttrKeyValue ) )
4315
4316 dn: cn=schema
4317 changetype: modify
4318 add: objectclasses
4319 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.6 NAME 'SolarisExecAttr' SUP top AUXILIARY MAY ( SolarisKernelSecurityPolicy $ SolarisProfileType $ SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisProfileID $ SolarisAttrKeyValue ) )
4320
4321 dn: cn=schema
4322 changetype: modify
4323 add: objectclasses
4324 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.1 NAME 'SolarisProject' SUP top MUST ( SolarisProjectID $ SolarisProjectName ) MAY ( memberUid $ memberGid $ description $ SolarisProjectAttr ) )
4325
4326 dn: cn=schema
4327 changetype: modify
4328 add: objectclasses
4329 objectclasses: ( 1.3.6.1.4.1.11.1.3.1.2.4 NAME 'DUAConfigProfile' SUP top DESC 'Abstraction of a base configuration for a DUA' MUST cn MAY ( defaultServerList $ preferredServerList $ defaultSearchBase $ defaultSearchScope $ searchTimeLimit $ bindTimeLimit $ credentialLevel $ authenticationMethod $ followReferrals $ serviceSearchDescriptor $ serviceCredentialLevel $ serviceAuthenticationMethod $ objectclassMap $ attributeMap $ profileTTL ) )
4330
4331 dn: cn=schema
4332 changetype: modify
4333 add: objectclasses
4334 objectclasses: ( 1.3.18.0.2.6.2549 NAME 'slpService' DESC 'DUMMY definition' SUP top MUST objectclass )
4335
4336 dn: cn=schema
4337 changetype: modify
4338 add: objectclasses
4339 objectclasses: ( 1.3.18.0.2.6.254 NAME 'slpServicePrinter' DESC 'Service Location Protocol (SLP) information.' SUP slpService AUXILIARY )
4340
4341 dn: cn=schema
4342 changetype: modify
4343 add: objectclasses
4344 objectclasses: ( 1.3.18.0.2.6.258 NAME 'printerAbstract' DESC 'Printer related information.' SUP top ABSTRACT MAY ( printer-name $ printer-natural-language-configured $ printer-location $ printer-info $ printer-more-info $ printer-make-and-model $ printer-multiple-document-jobs-supported $ printer-charset-configured $ printer-charset-supported $ printer-generated-natural-language-supported $ printer-document-format-supported $ printer-color-supported $ printer-compression-supported $ printer-pages-per-minute $ printer-pages-per-minute-color $ printer-finishings-supported $ printer-number-up-supported $ printer-sides-supported $ printer-media-supported $ printer-media-local-supported $ printer-resolution-supported $ printer-print-quality-supported $ printer-job-priority-supported $ printer-copies-supported $ printer-job-k-octets-supported $ printer-current-operator $ printer-service-person $ printer-delivery-orientation-supported $ printer-stacking-order-supported $ printer-output-features-supported ) )
4345
4346 dn: cn=schema
4347 changetype: modify
4348 add: objectclasses
4349 objectclasses: ( 1.3.18.0.2.6.255 NAME 'printerService' DESC 'Printer information.' SUP printerAbstract STRUCTURAL MAY ( printer-uri $ printer-xri-supported ) )
4350
4351 dn: cn=schema
4352 changetype: modify
4353 add: objectclasses
4354 objectclasses: ( 1.3.18.0.2.6.257 NAME 'printerServiceAuxClass' DESC 'Printer information.' SUP printerAbstract AUXILIARY MAY ( printer-uri $ printer-xri-supported ) )
4355
4356 dn: cn=schema
4357 changetype: modify
4358 add: objectclasses
4359 objectclasses: ( 1.3.18.0.2.6.256 NAME 'printerIPP' DESC 'Internet Printing Protocol (IPP) information.' SUP top AUXILIARY MAY ( printer-ipp-versions-supported $ printer-multiple-document-jobs-supported ) )
4360
4361 dn: cn=schema
4362 changetype: modify
4363 add: objectclasses
4364 objectclasses: ( 1.3.18.0.2.6.253 NAME 'printerLPR' DESC 'LPR information.' SUP top AUXILIARY MUST printer-name MAY printer-aliases )
4365
4366 dn: cn=schema
4367 changetype: modify
4368 add: objectclasses
4369 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.14 NAME 'sunPrinter' DESC 'Sun printer information' SUP top AUXILIARY MUST printer-name MAY ( sun-printer-bsdaddr $ sun-printer-kvp ) )
4370
4371 dn: cn=schema
4372 changetype: modify
4373 add: objectclasses
4374 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.12 NAME 'nisplusTimeZoneData' DESC 'NIS+ timezone table data' SUP top STRUCTURAL MUST cn MAY ( nisplusTimeZone $ description ) )
4375
4376 dn: cn=schema
4377 changetype: modify
4378 add: objectclasses
4379 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.8 NAME 'ipTnetTemplate' DESC 'Object class for TSOL network templates' SUP top MUST ipTnetTemplateName MAY SolarisAttrKeyValue )
4380
4381 dn: cn=schema
4382 changetype: modify
4383 add: objectclasses
4384 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.9 NAME 'ipTnetHost' DESC 'Associates an IP address or wildcard with a TSOL template_name' SUP top AUXILIARY MUST ipTnetNumber )
4385 EOF
4386 ) > ${TMPDIR}/schema_obj
4387
4388 # Add the entry.
4389 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/schema_obj ${VERB}"
4390 if [ $? -ne 0 ]; then
4391 ${ECHO} " ERROR: update of schema objectclass definitions failed!"
4392 cleanup
4393 exit 1
4394 fi
4395
4396 # Display message that schema is updated.
4397 ${ECHO} " ${STEP}. Schema objectclass definitions have been added."
4398 STEP=`expr $STEP + 1`
4399 }
4400
4401 #
4402 # modify_top_aci(): Modify the ACI for the top entry to disable self modify
4403 # of user attributes.
4404 #
4405 modify_top_aci()
4406 {
4407 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_top_aci()"
4408
4409 # Set ACI Name
4410 ACI_NAME="LDAP_Naming_Services_deny_write_access"
4411
4412 # Search for ACI_NAME
4413 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_top_aci 2>&1"
4414 if [ $? -ne 0 ]; then
4415 ${ECHO} "Error searching aci for ${LDAP_BASEDN}"
4416 cat ${TMPDIR}/chk_top_aci
4417 cleanup
4418 exit 1
4419 fi
4420 ${GREP} "${ACI_NAME}" ${TMPDIR}/chk_top_aci > /dev/null 2>&1
4421 if [ $? -eq 0 ]; then
4422 ${ECHO} " ${STEP}. Top level ACI ${ACI_NAME} already exists for ${LDAP_BASEDN}."
4423 STEP=`expr $STEP + 1`
4424 return 0
4425 fi
4426
4427 # Crate LDIF for top level ACI.
4428 ( cat <<EOF
4429 dn: ${LDAP_BASEDN}
4430 changetype: modify
4431 add: aci
4432 aci: (targetattr = "cn||uid||uidNumber||gidNumber||homeDirectory||shadowLastChange||shadowMin||shadowMax||shadowWarning||shadowInactive||shadowExpire||shadowFlag||memberUid||SolarisAttrKeyValue||SolarisAttrReserved1||SolarisAttrReserved2||SolarisUserQualifier")(version 3.0; acl ${ACI_NAME}; deny (write) userdn = "ldap:///self";)
4433 -
4434 EOF
4435 ) > ${TMPDIR}/top_aci
4436
4437 # Add the entry.
4438 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/top_aci ${VERB}"
4439 if [ $? -ne 0 ]; then
4440 ${ECHO} " ERROR: Modify of top level ACI failed! (restricts self modify)"
4441 cleanup
4442 exit 1
4443 fi
4444
4445 # Display message that ACI is updated.
4446 MSG="ACI for ${LDAP_BASEDN} modified to disable self modify."
4447 if [ $EXISTING_PROFILE -eq 1 ];then
4448 ${ECHO} " ACI SET: $MSG"
4449 else
4450 ${ECHO} " ${STEP}. $MSG"
4451 STEP=`expr $STEP + 1`
4452 fi
4453 }
4454
4455 #
4456 # find_and_delete_ACI(): Find an ACI in file $2 with a matching pattern $1.
4457 # Delete the ACI and print a message using $3 as the ACI name. $3 is needed
4458 # because it could have a different value than that of $1.
4459 find_and_delete_ACI()
4460 {
4461 [ $DEBUG -eq 1 ] && ${ECHO} "In find_and_delete_ACI"
4462
4463 # if an ACI with pattern $1 exists in file $2, delete it from ${LDAP_BASEDN}
4464 ${EGREP} $1 $2 | ${SED} -e 's/aci=//' > ${TMPDIR}/grep_find_delete_aci 2>&1
4465 if [ -s ${TMPDIR}/grep_find_delete_aci ]; then
4466 aci_to_delete=`${CAT} ${TMPDIR}/grep_find_delete_aci`
4467
4468 # Create the tmp file to delete the ACI.
4469 ( cat <<EOF
4470 dn: ${LDAP_BASEDN}
4471 changetype: modify
4472 delete: aci
4473 aci: ${aci_to_delete}
4474 EOF
4475 ) > ${TMPDIR}/find_delete_aci
4476
4477 # Delete the ACI
4478 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/find_delete_aci ${VERB}"
4479 if [ $? -ne 0 ]; then
4480 ${ECHO} " ERROR: Remove of $3 ACI failed!"
4481 cleanup
4482 exit 1
4483 fi
4484
4485 ${RM} -f ${TMPDIR}/find_delete_aci
4486 # Display message that an ACL is deleted.
4487 MSG="ACI $3 deleted."
4488 if [ $EXISTING_PROFILE -eq 1 ]; then
4489 ${ECHO} " ACI DELETED: $MSG"
4490 else
4491 ${ECHO} " ${STEP}. $MSG"
4492 STEP=`expr $STEP + 1`
4493 fi
4494 fi
4495 }
4496
4497 #
4498 # Add an ACI to deny non-admin access to shadow data when
4499 # shadow update is enabled.
4500 #
4501 deny_non_admin_shadow_access()
4502 {
4503 [ $DEBUG -eq 1 ] && ${ECHO} "In deny_non_admin_shadow_access()"
4504
4505 # Set ACI Names
4506 ACI_TO_ADD="LDAP_Naming_Services_deny_non_admin_shadow_access"
4507 ACI_TO_DEL="LDAP_Naming_Services_deny_non_host_shadow_access"
4508
4509 # Search for ACI_TO_ADD
4510 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_aci_non_admin 2>&1"
4511 if [ $? -ne 0 ]; then
4512 ${ECHO} "Error searching aci for ${LDAP_BASEDN}"
4513 cleanup
4514 exit 1
4515 fi
4516
4517 # If an ACI with ${ACI_TO_ADD} already exists, we are done.
4518 ${EGREP} ${ACI_TO_ADD} ${TMPDIR}/chk_aci_non_admin 2>&1 > /dev/null
4519 if [ $? -eq 0 ]; then
4520 MSG="ACI ${ACI_TO_ADD} already set for ${LDAP_BASEDN}."
4521 if [ $EXISTING_PROFILE -eq 1 ]; then
4522 ${ECHO} " NOT SET: $MSG"
4523 else
4524 ${ECHO} " ${STEP}. $MSG"
4525 STEP=`expr $STEP + 1`
4526 fi
4527 return 0
4528 fi
4529
4530 # The deny_non_admin_shadow_access and deny_non_host_shadow_access ACIs
4531 # should be mutually exclusive, so if the latter exists, delete it.
4532 find_and_delete_ACI ${ACI_TO_DEL} ${TMPDIR}/chk_aci_non_admin ${ACI_TO_DEL}
4533
4534 # Create the tmp file to add.
4535 ( cat <<EOF
4536 dn: ${LDAP_BASEDN}
4537 changetype: modify
4538 add: aci
4539 aci: (target="ldap:///${LDAP_BASEDN}")(targetattr = "shadowLastChange||
4540 shadowMin|| shadowMax||shadowWarning||shadowInactive||shadowExpire||
4541 shadowFlag||userPassword") (version 3.0; acl ${ACI_TO_ADD};
4542 deny (write,read,search,compare) userdn != "ldap:///${LDAP_ADMINDN}";)
4543 EOF
4544 ) > ${TMPDIR}/non_admin_aci_write
4545
4546 # Add the entry.
4547 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/non_admin_aci_write ${VERB}"
4548 if [ $? -ne 0 ]; then
4549 ${ECHO} " ERROR: Adding ACI ${ACI_TO_ADD} failed!"
4550 ${CAT} ${TMPDIR}/non_admin_aci_write
4551 cleanup
4552 exit 1
4553 fi
4554
4555 ${RM} -f ${TMPDIR}/non_admin_aci_write
4556 # Display message that the non-admin access to shadow data is denied.
4557 MSG="Non-Admin access to shadow data denied."
4558 if [ $EXISTING_PROFILE -eq 1 ]; then
4559 ${ECHO} " ACI SET: $MSG"
4560 else
4561 ${ECHO} " ${STEP}. $MSG"
4562 STEP=`expr $STEP + 1`
4563 fi
4564 }
4565
4566 #
4567 # Add an ACI to deny non-host access to shadow data when
4568 # shadow update is enabled and auth Method if gssapi.
4569 #
4570 deny_non_host_shadow_access()
4571 {
4572 [ $DEBUG -eq 1 ] && ${ECHO} "In deny_non_host_shadow_access()"
4573
4574 # Set ACI Names
4575 ACI_TO_ADD="LDAP_Naming_Services_deny_non_host_shadow_access"
4576 ACI_TO_DEL="LDAP_Naming_Services_deny_non_admin_shadow_access"
4577
4578 # Search for ACI_TO_ADD
4579 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_aci_non_host 2>&1"
4580 if [ $? -ne 0 ]; then
4581 ${ECHO} "Error searching aci for ${LDAP_BASEDN}"
4582 cleanup
4583 exit 1
4584 fi
4585
4586 # If an ACI with ${ACI_TO_ADD} already exists, we are done.
4587 ${EGREP} ${ACI_TO_ADD} ${TMPDIR}/chk_aci_non_host 2>&1 > /dev/null
4588 if [ $? -eq 0 ]; then
4589 MSG="ACI ${ACI_TO_ADD} already set for ${LDAP_BASEDN}."
4590 if [ $EXISTING_PROFILE -eq 1 ]; then
4591 ${ECHO} " NOT SET: $MSG"
4592 else
4593 ${ECHO} " ${STEP}. $MSG"
4594 STEP=`expr $STEP + 1`
4595 fi
4596 return 0
4597 fi
4598
4599 # The deny_non_admin_shadow_access and deny_non_host_shadow_access ACIs
4600 # should be mutually exclusive, so if the former exists, delete it.
4601 find_and_delete_ACI ${ACI_TO_DEL} ${TMPDIR}/chk_aci_non_host ${ACI_TO_DEL}
4602
4603 # Create the tmp file to add.
4604 ( cat <<EOF
4605 dn: ${LDAP_BASEDN}
4606 changetype: modify
4607 add: aci
4608 aci: (target="ldap:///${LDAP_BASEDN}")(targetattr = "shadowLastChange||
4609 shadowMin|| shadowMax||shadowWarning||shadowInactive||shadowExpire||
4610 shadowFlag||userPassword") (version 3.0; acl ${ACI_TO_ADD};
4611 deny (write,read,search,compare)
4612 userdn != "ldap:///cn=*+ipHostNumber=*,ou=Hosts,${LDAP_BASEDN}";)
4613 EOF
4614 ) > ${TMPDIR}/non_host_aci_write
4615
4616 # Add the entry.
4617 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/non_host_aci_write ${VERB}"
4618 if [ $? -ne 0 ]; then
4619 ${ECHO} " ERROR: Adding ACI ${ACI_TO_ADD} failed!"
4620 ${CAT} ${TMPDIR}/non_host_aci_write
4621 cleanup
4622 exit 1
4623 fi
4624
4625 ${RM} -f ${TMPDIR}/non_host_aci_write
4626 # Display message that the non-host access to shadow data is denied.
4627 MSG="Non-host access to shadow data is denied."
4628 if [ $EXISTING_PROFILE -eq 1 ]; then
4629 ${ECHO} " ACI SET: $MSG"
4630 else
4631 ${ECHO} " ${STEP}. $MSG"
4632 STEP=`expr $STEP + 1`
4633 fi
4634 }
4635
4636 #
4637 # add_vlv_aci(): Add access control information (aci) for VLV.
4638 #
4639 add_vlv_aci()
4640 {
4641 [ $DEBUG -eq 1 ] && ${ECHO} "In add_vlv_aci()"
4642
4643 # Add the VLV ACI.
4644 ( cat <<EOF
4645 dn: oid=2.16.840.1.113730.3.4.9,cn=features,cn=config
4646 changetype: modify
4647 replace: aci
4648 aci: (targetattr != "aci") (version 3.0; acl "VLV Request Control"; allow(read,search,compare) userdn = "ldap:///anyone";)
4649 EOF
4650 ) > ${TMPDIR}/vlv_aci
4651
4652 # Add the entry.
4653 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/vlv_aci ${VERB}"
4654 if [ $? -ne 0 ]; then
4655 ${ECHO} " ERROR: Add of VLV ACI failed!"
4656 cleanup
4657 exit 1
4658 fi
4659
4660 # Display message that schema is updated.
4661 ${ECHO} " ${STEP}. Add of VLV Access Control Information (ACI)."
4662 STEP=`expr $STEP + 1`
4663 }
4664
4665
4666 #
4667 # set_nisdomain(): Add the NisDomainObject to the Base DN.
4668 #
4669 set_nisdomain()
4670 {
4671 [ $DEBUG -eq 1 ] && ${ECHO} "In set_nisdomain()"
4672
4673 # Check if nisDomain is already set.
4674 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base \
4675 \"objectclass=*\"" > ${TMPDIR}/chk_nisdomain 2>&1
4676 ${EVAL} "${GREP} -i nisDomain ${TMPDIR}/chk_nisdomain ${VERB}"
4677 if [ $? -eq 0 ]; then
4678 ${ECHO} " ${STEP}. NisDomainObject for ${LDAP_BASEDN} was already set."
4679 STEP=`expr $STEP + 1`
4680 return 0
4681 fi
4682
4683 # Add the new top level containers.
4684 ( cat <<EOF
4685 dn: ${LDAP_BASEDN}
4686 changetype: modify
4687 objectclass: nisDomainObject
4688 nisdomain: ${LDAP_DOMAIN}
4689 EOF
4690 ) > ${TMPDIR}/nis_domain
4691
4692 # Add the entry.
4693 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/nis_domain ${VERB}"
4694 if [ $? -ne 0 ]; then
4695 ${ECHO} " ERROR: update of NisDomainObject in ${LDAP_BASEDN} failed."
4696 cleanup
4697 exit 1
4698 fi
4699
4700 # Display message that schema is updated.
4701 ${ECHO} " ${STEP}. NisDomainObject added to ${LDAP_BASEDN}."
4702 STEP=`expr $STEP + 1`
4703 }
4704
4705
4706 #
4707 # check_attrName(): Check that the attribute name is valid.
4708 # $1 Key to check.
4709 # Returns 0 : valid name 1 : invalid name
4710 #
4711 check_attrName()
4712 {
4713 [ $DEBUG -eq 1 ] && ${ECHO} "In check_attrName()"
4714 [ $DEBUG -eq 1 ] && ${ECHO} "check_attrName: Input Param = $1"
4715
4716 ${ECHO} $1 | ${EGREP} '^[0-9]+(\.[0-9]+)*$' > /dev/null 2>&1
4717 if [ $? -eq 0 ]; then
4718 ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \"objectclass=*\" \
4719 attributeTypes | ${EGREP} -i '^attributetypes[ ]*=[ ]*\([ ]*$1 ' ${VERB}"
4720 else
4721 ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \"objectclass=*\" \
4722 attributeTypes | ${EGREP} -i \"'$1'\" ${VERB}"
4723 fi
4724
4725 if [ $? -ne 0 ]; then
4726 return 1
4727 else
4728 return 0
4729 fi
4730 }
4731
4732
4733 #
4734 # get_objectclass(): Determine the objectclass for the given attribute name
4735 # $1 Attribute name to check.
4736 # _ATTR_NAME Return value, Object Name or NULL if unknown to idsconfig.
4737 #
4738 # NOTE: An attribute name can be valid but still we might not be able
4739 # to determine the objectclass from the table.
4740 # In such cases, the user needs to create the necessary object(s).
4741 #
4742 get_objectclass()
4743 {
4744 [ $DEBUG -eq 1 ] && ${ECHO} "In get_objectclass()"
4745 [ $DEBUG -eq 1 ] && ${ECHO} "get_objectclass: Input Param = $1"
4746
4747 # Set return value to NULL string.
4748 _ATTR_NAME=""
4749
4750 # Test key for type:
4751 case `${ECHO} ${1} | tr '[A-Z]' '[a-z]'` in
4752 ou | organizationalunitname | 2.5.4.11) _ATTR_NAME="organizationalUnit" ;;
4753 dc | domaincomponent | 0.9.2342.19200300.100.1.25) _ATTR_NAME="domain" ;;
4754 o | organizationname | 2.5.4.10) _ATTR_NAME="organization" ;;
4755 c | countryname | 2.5.4.6) _ATTR_NAME="country" ;;
4756 *) _ATTR_NAME="" ;;
4757 esac
4758
4759 [ $DEBUG -eq 1 ] && ${ECHO} "get_objectclass: _ATTR_NAME = $_ATTR_NAME"
4760 }
4761
4762
4763 #
4764 # add_base_objects(): Add any necessary base objects.
4765 #
4766 add_base_objects()
4767 {
4768 [ $DEBUG -eq 1 ] && ${ECHO} "In add_base_objects()"
4769
4770 # Convert to lower case for basename.
4771 format_string "${LDAP_BASEDN}"
4772 LOWER_BASEDN="${FMT_STR}"
4773 format_string "${LDAP_SUFFIX}"
4774 LOWER_SUFFIX="${FMT_STR}"
4775
4776 [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_BASEDN: ${LOWER_BASEDN}"
4777 [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_SUFFIX: ${LOWER_SUFFIX}"
4778
4779 # Create additional components.
4780 if [ "${LOWER_BASEDN}" = "${LOWER_SUFFIX}" ]; then
4781 [ $DEBUG -eq 1 ] && ${ECHO} "Base DN and Suffix equivalent"
4782 else
4783 # first, test that the suffix is valid
4784 dcstmp=`basename "${LOWER_BASEDN}" "${LOWER_SUFFIX}"`
4785 if [ "$dcstmp" = "${LOWER_BASEDN}" ]; then
4786 # should not happen since check_basedn_suffix() succeeded
4787 ${ECHO} "Invalid suffix ${LOWER_SUFFIX}"
4788 ${ECHO} "for Base DN ${LOWER_BASEDN}"
4789 cleanup
4790 exit 1
4791 fi
4792 # OK, suffix is valid, start working with LDAP_BASEDN
4793 # field separator is ',' (i.e., space is a valid character)
4794 dcstmp2="`${ECHO} ${LDAP_BASEDN} |
4795 sed -e 's/[ ]*,[ ]*/,/g' -e 's/[ ]*=[ ]*/=/g'`"
4796 dcs=""
4797 # use dcstmp to count the loop, and dcstmp2 to get the correct
4798 # string case
4799 # dcs should be in reverse order, only for these components
4800 # that need to be added
4801 while [ -n "${dcstmp}" ]
4802 do
4803 i2=`${ECHO} "$dcstmp2" | cut -f1 -d','`
4804 dk=`${ECHO} $i2 | awk -F= '{print $1}'`
4805 dc=`${ECHO} $i2 | awk -F= '{print $2}'`
4806 dcs="$dk=$dc,$dcs";
4807 dcstmp2=`${ECHO} "$dcstmp2" | cut -f2- -d','`
4808 dcstmp=`${ECHO} "$dcstmp" | cut -f2- -d','`
4809 [ $DEBUG -eq 1 ] && \
4810 ${ECHO} "dcs: ${dcs}\ndcstmp: ${dcstmp}\ndcstmp2: ${dcstmp2}\n"
4811 done
4812
4813
4814
4815 lastdc=${LDAP_SUFFIX}
4816 dc=`${ECHO} "${dcs}" | cut -f1 -d','`
4817 dcstmp=`${ECHO} "${dcs}" | cut -f2- -d','`
4818 while [ -n "${dc}" ]; do
4819 # Get Key and component from $dc.
4820 dk2=`${ECHO} $dc | awk -F= '{print $1}'`
4821 dc2=`${ECHO} $dc | awk -F= '{print $2}'`
4822
4823 # At this point, ${dk2} is a valid attribute name
4824
4825 # Check if entry exists first, if so, skip to next.
4826 ${LDAPSEARCH} ${SERVER_ARGS} -b "${dk2}=${dc2},$lastdc" -s base "objectclass=*" > /dev/null 2>&1
4827 if [ $? -eq 0 ]; then
4828 # Set the $lastdc to new dc.
4829 lastdc="${dk2}=${dc2},$lastdc"
4830
4831 # Process next component.
4832 dc=`${ECHO} "${dcstmp}" | cut -f1 -d','`
4833 dcstmp=`${ECHO} "${dcstmp}" | cut -f2- -d','`
4834 continue
4835
4836 fi
4837
4838 # Determine the objectclass for the entry.
4839 get_objectclass $dk2
4840 OBJ_Name=${_ATTR_NAME}
4841 if [ "${OBJ_Name}" = "" ]; then
4842 ${ECHO} "Cannot determine objectclass for $dk2"
4843 ${ECHO} "Please create ${dk2}=${dc2},$lastdc entry and rerun idsconfig"
4844 exit 1
4845 fi
4846
4847 # Add the new container.
4848 ( cat <<EOF
4849 dn: ${dk2}=${dc2},$lastdc
4850 ${dk2}: $dc2
4851 objectClass: top
4852 objectClass: ${OBJ_Name}
4853 EOF
4854 ) > ${TMPDIR}/base_objects
4855
4856
4857 # Set the $lastdc to new dc.
4858 lastdc="${dk2}=${dc2},$lastdc"
4859
4860 # Add the entry.
4861 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/base_objects ${VERB}"
4862 if [ $? -ne 0 ]; then
4863 ${ECHO} " ERROR: update of base objects ${dc} failed."
4864 cleanup
4865 exit 1
4866 fi
4867
4868 # Display message that schema is updated.
4869 ${ECHO} " ${STEP}. Created DN component ${dc}."
4870 STEP=`expr $STEP + 1`
4871
4872 # Process next component.
4873 dc=`${ECHO} "${dcstmp}" | cut -f1 -d','`
4874 dcstmp=`${ECHO} "${dcstmp}" | cut -f2- -d','`
4875 done
4876 fi
4877 }
4878
4879
4880 #
4881 # add_new_containers(): Add the top level classes.
4882 #
4883 # $1 = Base DN
4884 #
4885 add_new_containers()
4886 {
4887 [ $DEBUG -eq 1 ] && ${ECHO} "In add_new_containers()"
4888
4889 for ou in people group rpc protocols networks netgroup \
4890 aliases hosts services ethers profile printers projects \
4891 SolarisAuthAttr SolarisProfAttr Timezone ipTnet ; do
4892
4893 # Check if nismaps already exist.
4894 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"ou=${ou},${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}"
4895 if [ $? -eq 0 ]; then
4896 continue
4897 fi
4898
4899 # Create TMP file to add.
4900 ( cat <<EOF
4901 dn: ou=${ou},${LDAP_BASEDN}
4902 ou: ${ou}
4903 objectClass: top
4904 objectClass: organizationalUnit
4905 EOF
4906 ) > ${TMPDIR}/toplevel.${ou}
4907
4908 # Add the entry.
4909 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/toplevel.${ou} ${VERB}"
4910 if [ $? -ne 0 ]; then
4911 ${ECHO} " ERROR: Add of ou=${ou} container failed!"
4912 cleanup
4913 exit 1
4914 fi
4915 done
4916
4917 # Display message that top level OU containers complete.
4918 ${ECHO} " ${STEP}. Top level \"ou\" containers complete."
4919 STEP=`expr $STEP + 1`
4920 }
4921
4922
4923 #
4924 # add_auto_maps(): Add the automount map entries.
4925 #
4926 # auto_home, auto_direct, auto_master, auto_shared
4927 #
4928 add_auto_maps()
4929 {
4930 [ $DEBUG -eq 1 ] && ${ECHO} "In add_auto_maps()"
4931
4932 # Set AUTO_MAPS for maps to create.
4933 AUTO_MAPS="auto_home auto_direct auto_master auto_shared"
4934
4935 for automap in $AUTO_MAPS; do
4936 # Check if automaps already exist.
4937 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"automountMapName=${automap},${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}"
4938 if [ $? -eq 0 ]; then
4939 continue
4940 fi
4941
4942 # Create the tmp file to add.
4943 ( cat <<EOF
4944 dn: automountMapName=${automap},${LDAP_BASEDN}
4945 automountMapName: ${automap}
4946 objectClass: top
4947 objectClass: automountMap
4948 EOF
4949 ) > ${TMPDIR}/automap.${automap}
4950
4951 # Add the entry.
4952 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/automap.${automap} ${VERB}"
4953 if [ $? -ne 0 ]; then
4954 ${ECHO} " ERROR: Add of automap ${automap} failed!"
4955 cleanup
4956 exit 1
4957 fi
4958 done
4959
4960 # Display message that automount entries are updated.
4961 ${ECHO} " ${STEP}. automount maps: $AUTO_MAPS processed."
4962 STEP=`expr $STEP + 1`
4963 }
4964
4965
4966 #
4967 # add_proxyagent(): Add entry for nameservice to use to access server.
4968 #
4969 add_proxyagent()
4970 {
4971 [ $DEBUG -eq 1 ] && ${ECHO} "In add_proxyagent()"
4972
4973 # Check if proxy agent already exists.
4974 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_PROXYAGENT}\" -s base \"objectclass=*\" ${VERB}"
4975 if [ $? -eq 0 ]; then
4976 ${ECHO} " ${STEP}. Proxy Agent ${LDAP_PROXYAGENT} already exists."
4977 STEP=`expr $STEP + 1`
4978 return 0
4979 fi
4980
4981 # Get cn and sn names from LDAP_PROXYAGENT.
4982 cn_tmp=`${ECHO} ${LDAP_PROXYAGENT} | cut -f1 -d, | cut -f2 -d=`
4983
4984 # Create the tmp file to add.
4985 ( cat <<EOF
4986 dn: ${LDAP_PROXYAGENT}
4987 cn: ${cn_tmp}
4988 sn: ${cn_tmp}
4989 objectclass: top
4990 objectclass: person
4991 userpassword: ${LDAP_PROXYAGENT_CRED}
4992 EOF
4993 ) > ${TMPDIR}/proxyagent
4994
4995 # Add the entry.
4996 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/proxyagent ${VERB}"
4997 if [ $? -ne 0 ]; then
4998 ${ECHO} " ERROR: Adding proxyagent failed!"
4999 cleanup
5000 exit 1
5001 fi
5002
5003 # Display message that schema is updated.
5004 ${ECHO} " ${STEP}. Proxy Agent ${LDAP_PROXYAGENT} added."
5005 STEP=`expr $STEP + 1`
5006 }
5007
5008 #
5009 # allow_proxy_read_pw(): Give Proxy Agent read permission for password.
5010 #
5011 allow_proxy_read_pw()
5012 {
5013 [ $DEBUG -eq 1 ] && ${ECHO} "In allow_proxy_read_pw()"
5014
5015 # Search for ACI_NAME
5016 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_proxyread_aci 2>&1"
5017 ${GREP} "${PROXY_ACI_NAME}" ${TMPDIR}/chk_proxyread_aci > /dev/null 2>&1
5018 if [ $? -eq 0 ]; then
5019 ${ECHO} " ${STEP}. Proxy ACI ${PROXY_ACI_NAME=} already exists for ${LDAP_BASEDN}."
5020 STEP=`expr $STEP + 1`
5021 return 0
5022 fi
5023
5024 # Create the tmp file to add.
5025 ( cat <<EOF
5026 dn: ${LDAP_BASEDN}
5027 changetype: modify
5028 add: aci
5029 aci: (target="ldap:///${LDAP_BASEDN}")(targetattr="userPassword")
5030 (version 3.0; acl ${PROXY_ACI_NAME}; allow (compare,read,search)
5031 userdn = "ldap:///${LDAP_PROXYAGENT}";)
5032 EOF
5033 ) > ${TMPDIR}/proxy_read
5034
5035 # Add the entry.
5036 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/proxy_read ${VERB}"
5037 if [ $? -ne 0 ]; then
5038 ${ECHO} " ERROR: Allow ${LDAP_PROXYAGENT} to read password failed!"
5039 cleanup
5040 exit 1
5041 fi
5042
5043 # Display message that schema is updated.
5044 ${ECHO} " ${STEP}. Give ${LDAP_PROXYAGENT} read permission for password."
5045 STEP=`expr $STEP + 1`
5046 }
5047
5048 # Delete Proxy Agent read permission for password.
5049 delete_proxy_read_pw()
5050 {
5051 [ $DEBUG -eq 1 ] && ${ECHO} "In delete_proxy_read_pw()"
5052
5053 # Search for ACI_NAME
5054 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_proxyread_aci 2>&1"
5055 ${GREP} "${PROXY_ACI_NAME}" ${TMPDIR}/chk_proxyread_aci | \
5056 ${SED} -e 's/aci=//' > ${TMPDIR}/grep_proxyread_aci 2>&1
5057 if [ $? -ne 0 ]; then
5058 ${ECHO} "Proxy ACI ${PROXY_ACI_NAME} does not exist for ${LDAP_BASEDN}."
5059 return 0
5060 fi
5061
5062 # We need to remove proxy agent's read access to user passwords,
5063 # but We do not know the value of the ${LDAP_PROXYAGENT} here, so
5064 # 1. if only one match found, delete it
5065 # 2. if more than one matches found, ask the user which one to delete
5066 HOWMANY=`${WC} -l ${TMPDIR}/grep_proxyread_aci | ${AWK} '{print $1}'`
5067 if [ $HOWMANY -eq 0 ]; then
5068 ${ECHO} "Proxy ACI ${PROXY_ACI_NAME} does not exist for ${LDAP_BASEDN}."
5069 return 0
5070 fi
5071 if [ $HOWMANY -eq 1 ];then
5072 proxy_aci=`${CAT} ${TMPDIR}/grep_proxyread_aci`
5073 else
5074 ${CAT} << EOF
5075
5076 Proxy agent is not allowed to read user passwords when shadow
5077 update is enabled. There are more than one proxy agents found.
5078 Please select the currently proxy agent being used, so that
5079 idsconfig can remove its read access to user passwords.
5080
5081 The proxy agents are:
5082
5083 EOF
5084 # generate the proxy agent list
5085 ${SED} -e "s/.*ldap:\/\/\/.*ldap:\/\/\///" \
5086 ${TMPDIR}/grep_proxyread_aci | ${SED} -e "s/\";)//" > \
5087 ${TMPDIR}/proxy_agent_list
5088
5089 # print the proxy agent list
5090 ${AWK} '{print NR ": " $0}' ${TMPDIR}/proxy_agent_list
5091
5092 # ask the user to pick one
5093 _MENU_PROMPT="Select the proxy agent (1-$HOWMANY): "
5094 get_menu_choice "${_MENU_PROMPT}" "0" "$HOWMANY"
5095 _CH=$MN_CH
5096 proxy_aci=`${SED} -n "$_CH p" ${TMPDIR}/grep_proxyread_aci`
5097 fi
5098
5099 # Create the tmp file to delete the ACI.
5100 ( cat <<EOF
5101 dn: ${LDAP_BASEDN}
5102 changetype: modify
5103 delete: aci
5104 aci: ${proxy_aci}
5105 EOF
5106 ) > ${TMPDIR}/proxy_delete
5107
5108 # Delete the ACI
5109 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/proxy_delete ${VERB}"
5110 if [ $? -ne 0 ]; then
5111 ${ECHO} " ERROR: Remove of ${PROXY_ACI_NAME} ACI failed!"
5112 cat ${TMPDIR}/proxy_delete
5113 cleanup
5114 exit 1
5115 fi
5116
5117 # Display message that ACI is updated.
5118 MSG="Removed ${PROXY_ACI_NAME} ACI for proxyagent read permission for password."
5119 ${ECHO} " "
5120 ${ECHO} " ACI REMOVED: $MSG"
5121 ${ECHO} " The ACI removed is $proxy_aci"
5122 ${ECHO} " "
5123 }
5124
5125 #
5126 # add_profile(): Add client profile to server.
5127 #
5128 add_profile()
5129 {
5130 [ $DEBUG -eq 1 ] && ${ECHO} "In add_profile()"
5131
5132 # If profile name already exists, DELETE it, and add new one.
5133 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${LDAP_PROFILE_NAME},ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}"
5134 if [ $? -eq 0 ]; then
5135 # Create Delete file.
5136 ( cat <<EOF
5137 cn=${LDAP_PROFILE_NAME},ou=profile,${LDAP_BASEDN}
5138 EOF
5139 ) > ${TMPDIR}/del_profile
5140
5141 # Check if DEL_OLD_PROFILE is set. (If not ERROR)
5142 if [ $DEL_OLD_PROFILE -eq 0 ]; then
5143 ${ECHO} "ERROR: Profile name ${LDAP_PROFILE_NAME} exists! Add failed!"
5144 exit 1
5145 fi
5146
5147 # Delete the OLD profile.
5148 ${EVAL} "${LDAPDELETE} ${LDAP_ARGS} -f ${TMPDIR}/del_profile ${VERB}"
5149 if [ $? -ne 0 ]; then
5150 ${ECHO} " ERROR: Attempt to DELETE profile failed!"
5151 cleanup
5152 exit 1
5153 fi
5154 fi
5155
5156 # Build the "ldapclient genprofile" command string to execute.
5157 GEN_CMD="ldapclient genprofile -a \"profileName=${LDAP_PROFILE_NAME}\""
5158
5159 # Add required argument defaultSearchBase.
5160 GEN_CMD="${GEN_CMD} -a \"defaultSearchBase=${LDAP_BASEDN}\""
5161
5162 # Add optional parameters.
5163 [ -n "$LDAP_SERVER_LIST" ] && \
5164 GEN_CMD="${GEN_CMD} -a \"defaultServerList=${LDAP_SERVER_LIST}\""
5165 [ -n "$LDAP_SEARCH_SCOPE" ] && \
5166 GEN_CMD="${GEN_CMD} -a \"defaultSearchScope=${LDAP_SEARCH_SCOPE}\""
5167 [ -n "$LDAP_CRED_LEVEL" ] && \
5168 GEN_CMD="${GEN_CMD} -a \"credentialLevel=${LDAP_CRED_LEVEL}\""
5169 [ -n "$LDAP_AUTHMETHOD" ] && \
5170 GEN_CMD="${GEN_CMD} -a \"authenticationMethod=${LDAP_AUTHMETHOD}\""
5171 [ -n "$LDAP_FOLLOWREF" ] && \
5172 GEN_CMD="${GEN_CMD} -a \"followReferrals=${LDAP_FOLLOWREF}\""
5173 [ -n "$LDAP_SEARCH_TIME_LIMIT" ] && \
5174 GEN_CMD="${GEN_CMD} -a \"searchTimeLimit=${LDAP_SEARCH_TIME_LIMIT}\""
5175 [ -n "$LDAP_PROFILE_TTL" ] && \
5176 GEN_CMD="${GEN_CMD} -a \"profileTTL=${LDAP_PROFILE_TTL}\""
5177 [ -n "$LDAP_BIND_LIMIT" ] && \
5178 GEN_CMD="${GEN_CMD} -a \"bindTimeLimit=${LDAP_BIND_LIMIT}\""
5179 [ -n "$LDAP_PREF_SRVLIST" ] && \
5180 GEN_CMD="${GEN_CMD} -a \"preferredServerList=${LDAP_PREF_SRVLIST}\""
5181 [ -n "$LDAP_SRV_AUTHMETHOD_PAM" ] && \
5182 GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_PAM}\""
5183 [ -n "$LDAP_SRV_AUTHMETHOD_KEY" ] && \
5184 GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_KEY}\""
5185 [ -n "$LDAP_SRV_AUTHMETHOD_CMD" ] && \
5186 GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_CMD}\""
5187
5188 # Check if there are any service search descriptors to ad.
5189 if [ -s "${SSD_FILE}" ]; then
5190 ssd_2_profile
5191 fi
5192
5193 # Execute "ldapclient genprofile" to create profile.
5194 eval ${GEN_CMD} > ${TMPDIR}/gen_profile 2> ${TMPDIR}/gen_profile_ERR
5195 if [ $? -ne 0 ]; then
5196 ${ECHO} " ERROR: ldapclient genprofile failed!"
5197 cleanup
5198 exit 1
5199 fi
5200
5201 # Add the generated profile..
5202 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/gen_profile ${VERB}"
5203 if [ $? -ne 0 ]; then
5204 ${ECHO} " ERROR: Attempt to add profile failed!"
5205 cleanup
5206 exit 1
5207 fi
5208
5209 # Display message that schema is updated.
5210 ${ECHO} " ${STEP}. Generated client profile and loaded on server."
5211 STEP=`expr $STEP + 1`
5212 }
5213
5214
5215 #
5216 # cleanup(): Remove the TMPDIR and all files in it.
5217 #
5218 cleanup()
5219 {
5220 [ $DEBUG -eq 1 ] && ${ECHO} "In cleanup()"
5221
5222 rm -fr ${TMPDIR}
5223 }
5224
5225
5226 #
5227 # * * * MAIN * * *
5228 #
5229 # Description:
5230 # This script assumes that the iPlanet Directory Server (iDS) is
5231 # installed and that setup has been run. This script takes the
5232 # iDS server from that point and sets up the infrastructure for
5233 # LDAP Naming Services. After running this script, ldapaddent(1M)
5234 # or some other tools can be used to populate data.
5235
5236 # Initialize the variables that need to be set to NULL, or some
5237 # other initial value before the rest of the functions can be called.
5238 init
5239
5240 # Parse command line arguments.
5241 parse_arg $*
5242 shift $?
5243
5244 # Print extra line to separate from prompt.
5245 ${ECHO} " "
5246
5247 # Either Load the user specified config file
5248 # or prompt user for config info.
5249 if [ -n "$INPUT_FILE" ]
5250 then
5251 load_config_file
5252 INTERACTIVE=0 # Turns off prompts that occur later.
5253 validate_info # Validate basic info in file.
5254 chk_ids_version # Check iDS version for compatibility.
5255 else
5256 # Display BACKUP warning to user.
5257 display_msg backup_server
5258 get_confirm "Do you wish to continue with server setup (y/n/h)?" "n" "backup_help"
5259 if [ $? -eq 0 ]; then # if No, cleanup and exit.
5260 cleanup ; exit 1
5261 fi
5262
5263 # Prompt for values.
5264 prompt_config_info
5265 display_summary # Allow user to modify results.
5266 INTERACTIVE=1 # Insures future prompting.
5267 fi
5268
5269 # Modify slapd.oc.conf to ALLOW cn instead of REQUIRE.
5270 modify_cn
5271
5272 # Modify timelimit to user value.
5273 [ $NEED_TIME -eq 1 ] && modify_timelimit
5274
5275 # Modify sizelimit to user value.
5276 [ $NEED_SIZE -eq 1 ] && modify_sizelimit
5277
5278 # Modify the password storage scheme to support CRYPT.
5279 if [ "$NEED_CRYPT" = "TRUE" ]; then
5280 modify_pwd_crypt
5281 fi
5282
5283 # Update the schema (Attributes, Objectclass Definitions)
5284 if [ ${SCHEMA_UPDATED} -eq 0 ]; then
5285 update_schema_attr
5286 update_schema_obj
5287 fi
5288
5289 # Add suffix together with its root entry (if needed)
5290 add_suffix ||
5291 {
5292 cleanup
5293 exit 1
5294 }
5295
5296 # Add base objects (if needed)
5297 add_base_objects
5298
5299 # Update the NisDomainObject.
5300 # The Base DN might of just been created, so this MUST happen after
5301 # the base objects have been added!
5302 set_nisdomain
5303
5304 # Add top level classes (new containers)
5305 add_new_containers
5306
5307 # Add common nismaps.
5308 add_auto_maps
5309
5310 # Modify top ACI.
5311 modify_top_aci
5312
5313 # Add Access Control Information for VLV.
5314 add_vlv_aci
5315
5316 # if Proxy needed, Add Proxy Agent and give read permission for password.
5317 if [ $NEED_PROXY -eq 1 ]; then
5318 add_proxyagent
5319 if [ "$LDAP_ENABLE_SHADOW_UPDATE" != "TRUE" ]; then
5320 allow_proxy_read_pw
5321 fi
5322 fi
5323
5324 # If admin needed for shadow update, Add the administrator identity and
5325 # give read/write permission for shadow, and deny all others read/write
5326 # access to it.
5327 if [ $NEED_ADMIN -eq 1 ]; then
5328 add_admin
5329 allow_admin_read_write_shadow
5330 # deny non-admin access to shadow data
5331 deny_non_admin_shadow_access
5332 fi
5333
5334 if [ $GSSAPI_ENABLE -eq 1 ]; then
5335 add_id_mapping_rules
5336 # do not modify ACI if "sasl/GSSAPI" and "self" are not selected
5337 if [ "$LDAP_CRED_LEVEL" = "self" -a "$LDAP_AUTHMETHOD" = "sasl/GSSAPI" ]; then
5338 modify_userpassword_acl_for_gssapi
5339 else
5340 ${ECHO} " ACL for GSSAPI was not set because of incompatibility in profile."
5341 fi
5342 fi
5343
5344 # If use host principal for shadow update, give read/write permission for
5345 # shadow, and deny all others' read/write access to it.
5346 if [ $NEED_HOSTACL -eq 1 ]; then
5347 allow_host_read_write_shadow
5348 # deny non-host access to shadow data
5349 deny_non_host_shadow_access
5350 fi
5351
5352
5353 # Generate client profile and add it to the server.
5354 add_profile
5355
5356 # Add Indexes to improve Search Performance.
5357 add_eq_indexes
5358 add_sub_indexes
5359 add_vlv_indexes
5360
5361 # Display setup complete message
5362 display_msg setup_complete
5363
5364 # Display VLV index commands to be executed on server.
5365 display_vlv_cmds
5366
5367 # Create config file if requested.
5368 [ -n "$OUTPUT_FILE" ] && create_config_file
5369
5370 # Removed the TMPDIR and all files in it.
5371 cleanup
5372
5373 exit 0
5374 # end of MAIN.