1 #!/bin/sh
2 #
3 # CDDL HEADER START
4 #
5 # The contents of this file are subject to the terms of the
6 # Common Development and Distribution License (the "License").
7 # You may not use this file except in compliance with the License.
8 #
9 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10 # or http://www.opensolaris.org/os/licensing.
11 # See the License for the specific language governing permissions
12 # and limitations under the License.
13 #
14 # When distributing Covered Code, include this CDDL HEADER in each
15 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16 # If applicable, add the following below this CDDL HEADER, with the
17 # fields enclosed by brackets "[]" replaced with your own identifying
18 # information: Portions Copyright [yyyy] [name of copyright owner]
19 #
20 # CDDL HEADER END
21 #
22 # i.rbac
23 #
24 # Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
25 #
26 # class action script for "rbac" class files
27 # installed by pkgadd
28 #
29 # Files in "rbac" class:
30 #
31 # /etc/security/{prof_attr,exec_attr,auth_attr}
32 # /etc/user_attr
33 #
34 # Allowable exit codes
35 #
36 # 0 - success
37 # 2 - warning or possible error condition. Installation continues. A warning
38 # message is displayed at the time of completion.
39 #
40
41 umask 022
42
43 tmp_dir=${TMPDIR:-/tmp}
44
45 PATH="/usr/bin:/usr/sbin:${PATH}"
46 export PATH
47
48 basename_cmd=basename
49 cp_cmd=cp
50 egrep_cmd=egrep
51 mv_cmd=mv
52 nawk_cmd=nawk
53 rm_cmd=rm
54 sed_cmd=sed
55 sort_cmd=sort
56
57 # $1 is the type
58 # $2 is the "old/existing file"
59 # $3 is the "new (to be merged)" file
60 # $4 is the output file
61 # returns 0 on success
62 # returns 2 on failure if nawk fails with non-zero exit status
63 #
64 dbmerge() {
65 #
66 # Remove the ident lines.
67 #
68 ${egrep_cmd} -v '^#[pragma ]*ident' $2 > $4.old 2>/dev/null
69 #
70 # If the new file has a Sun copyright, remove the Sun copyright from the old
71 # file.
72 #
73 newcr=`${egrep_cmd} '^# Copyright.*Sun Microsystems, Inc.' $3 \
74 2>/dev/null`
75 if [ -n "${newcr}" ]; then
76 $sed_cmd -e '/^# Copyright.*Sun Microsystems, Inc./d' \
77 -e '/^# All rights reserved./d' \
78 -e '/^# Use is subject to license terms./d' \
79 $4.old > $4.$$ 2>/dev/null
80 $mv_cmd $4.$$ $4.old
81 fi
82 #
83 # If the new file has an Oracle copyright, remove both the Sun and Oracle
84 # copyrights from the old file.
85 #
86 oracle_cr=`${egrep_cmd} '^# Copyright.*Oracle and/or its affiliates.' \
87 $3 2>/dev/null`
88 if [ -n "${oracle_cr}" ]; then
89 $sed_cmd -e '/^# Copyright.*Sun Microsystems, Inc./d' \
90 -e '/^# All rights reserved./d' \
91 -e '/^# Use is subject to license terms./d' \
92 -e '/^# Copyright.*Oracle and\/or its affiliates./d' \
93 $4.old > $4.$$ 2>/dev/null
94 $mv_cmd $4.$$ $4.old
95 fi
96 #
97 # If the new file has the CDDL, remove it from the old file.
98 #
99 newcr=`${egrep_cmd} '^# CDDL HEADER START' $3 2>/dev/null`
100 if [ -n "${newcr}" ]; then
101 $sed_cmd -e '/^# CDDL HEADER START/,/^# CDDL HEADER END/d' \
102 $4.old > $4.$$ 2>/dev/null
103 $mv_cmd $4.$$ $4.old
104 fi
105 #
106 # Remove empty lines and multiple instances of these comments:
107 #
108 $sed_cmd -e '/^# \/etc\/security\/exec_attr/d' -e '/^#$/d' \
109 -e '/^# execution attributes for profiles./d' \
110 -e '/^# See exec_attr(4)/d' \
111 -e '/^# \/etc\/user_attr/d' \
112 -e '/^# user attributes. see user_attr(4)/d' \
113 -e '/^# \/etc\/security\/prof_attr/d' \
114 -e '/^# profiles attributes. see prof_attr(4)/d' \
115 -e '/^# See prof_attr(4)/d' \
116 -e '/^# \/etc\/security\/auth_attr/d' \
117 -e '/^# authorizations. see auth_attr(4)/d' \
118 -e '/^# authorization attributes. see auth_attr(4)/d' \
119 $4.old > $4.$$
120 $mv_cmd $4.$$ $4.old
121 #
122 # Retain old and new header comments.
123 #
124 $sed_cmd -n -e '/^[^#]/,$d' -e '/^##/,$d' -e p $4.old > $4
125 $rm_cmd $4.old
126 $sed_cmd -n -e '/^[^#]/,$d' -e '/^##/,$d' -e p $3 >> $4
127 #
128 # If the output file now has both Sun and Oracle copyrights, remove
129 # the Sun copyright.
130 #
131 sun_cr=`${egrep_cmd} '^# Copyright.*Sun Microsystems, Inc.' \
132 $4 2>/dev/null`
133 oracle_cr=`${egrep_cmd} '^# Copyright.*Oracle and/or its affiliates.' \
134 $4 2>/dev/null`
135 if [ -n "${sun_cr}" ] && [ -n "${oracle_cr}" ]; then
136 $sed_cmd -e '/^# Copyright.*Sun Microsystems, Inc./d' \
137 -e '/^# All rights reserved./d' \
138 -e '/^# Use is subject to license terms./d' \
139 $4 > $4.$$ 2>/dev/null
140 $mv_cmd $4.$$ $4
141 fi
142 #
143 # Handle line continuations (trailing \)
144 #
145 $sed_cmd \
146 -e '/\\$/{N;s/\\\n//;}' -e '/\\$/{N;s/\\\n//;}' \
147 -e '/\\$/{N;s/\\\n//;}' -e '/\\$/{N;s/\\\n//;}' \
148 -e '/\\$/{N;s/\\\n//;}' -e '/\\$/{N;s/\\\n//;}' \
149 $2 > $4.old
150 $sed_cmd \
151 -e '/\\$/{N;s/\\\n//;}' -e '/\\$/{N;s/\\\n//;}' \
152 -e '/\\$/{N;s/\\\n//;}' -e '/\\$/{N;s/\\\n//;}' \
153 -e '/\\$/{N;s/\\\n//;}' -e '/\\$/{N;s/\\\n//;}' \
154 $3 > $4.new
155 #
156 # The nawk script below processes the old and new files using up to
157 # three passes. If the old file is empty, only the final pass over
158 # the new file is required.
159 #
160 if [ -s $4.old ]; then
161 nawk_pass1=$4.old
162 nawk_pass2=$4.new
163 nawk_pass3=$4.new
164 else
165 nawk_pass1=
166 nawk_pass2=
167 nawk_pass3=$4.new
168 fi
169 #
170 #!/usr/bin/nawk -f
171 #
172 # dbmerge type=[auth|prof|user|exec] [ old-file new-file ] new-file
173 #
174 # Merge two versions of an RBAC database file. The output
175 # consists of the lines from the new-file, while preserving
176 # user customizations in the old-file.
177 #
178 # Entries in the new-file replace corresponding entries in the
179 # old-file, except as follows: For exec_attr, all old entries
180 # for profiles contained in the new-file are discarded. For
181 # user_attr, the "root" entry from the old-file is retained,
182 # and new keywords from the new-file are merged into it.
183 #
184 # Records with the same key field(s) are merged, so that the
185 # keyword/value section of each output record contains the union
186 # of the keywords found in all input records with the same key
187 # field(s). For selected multi-value keywords [1] the values from
188 # the new-file are merged with retained values from the old-file.
189 # Otherwise, the value for each keyword is the final value found
190 # in the new-file, except for keywords in the user_attr entry for
191 # "root" where values from the old-file are always retained.
192 #
193 # [1] The following file type and keyword combinations are merged:
194 # prof_attr: auths, profiles, privs
195 # user_attr: auths, profiles, roles
196 #
197 # The output is run through sort except for the comments
198 # which will appear first in the output.
199 #
200 #
201 $nawk_cmd '
202
203 # This script may be invoked with up to three file names. Each file
204 # name corresponds to a separate processing pass. The passes are
205 # defined as follows:
206 #
207 # Pass 1: Read existing data.
208 # Data from the old-file is read into memory.
209 #
210 # Pass 2: Remove obsolete data.
211 # Discard any data from the old-file that is part of profiles that
212 # are also in the new-file. (As a special case, the user_attr entry
213 # for 'root' is always retained.)
214 #
215 # Pass 3: Merge new data.
216 # Data from the new-file is merged with the remaining old-file data.
217 # (As a special case, exec_attr entries are replaced, not merged.)
218
219 BEGIN {
220 # The variable 'pass' specifies which type of processing to perform.
221 # When processing only one file, skip passes 1 and 2.
222 if (ARGC == 3)
223 pass += 2;
224
225 # The array 'keyword_behavior' specifies the special treatment of
226 # [type, keyword] combinations subject to value merging.
227 keyword_behavior["prof", "auths"] = "merge";
228 keyword_behavior["prof", "profiles"] = "merge";
229 keyword_behavior["prof", "privs"] = "merge";
230 keyword_behavior["user", "auths"] = "merge";
231 keyword_behavior["user", "profiles"] = "merge";
232 keyword_behavior["user", "roles"] = "merge";
233
234 FS=":"
235 }
236
237 # When FNR (current file record number) is 1 it indicates that nawk
238 # is starting to read the next file specified on its command line,
239 # and is beginning the next processing pass.
240 FNR == 1 {
241 pass++;
242 }
243
244 /^#/ || /^$/ {
245 next;
246 }
247
248 {
249 # For each input line, nawk automatically assigns the complete
250 # line to $0 and also splits the line at field separators and
251 # assigns each field to a variable $1..$n. Assignment to $0
252 # re-splits the line into the field variables. Conversely,
253 # assignment to a variable $1..$n will cause $0 to be recomputed
254 # from the field variable values.
255 #
256 # This code adds awareness of escaped field separators by using
257 # a custom function to split the line into a temporary array.
258 # It assigns the empty string to $0 to clear any excess field
259 # variables, and assigns the desired elements of the temporary
260 # array back to the field variables $1..$7.
261 #
262 # Subsequent code must not assign directly to $0 or the fields
263 # will be re-split without regard to escaped field separators.
264 split_escape($0, f, ":");
265 $0 = "";
266 $1 = f[1];
267 $2 = f[2];
268 $3 = f[3];
269 $4 = f[4];
270 $5 = f[5];
271 $6 = f[6];
272 $7 = f[7];
273 }
274
275 type == "auth" {
276 key = $1 ":" $2 ":" $3 ;
277 if (pass == 1) {
278 short_comment[key] = $4 ;
279 long_comment[key] = $5;
280 record[key] = $6;
281 } else if (pass == 2) {
282 delete short_comment[key];
283 delete long_comment[key];
284 delete record[key];
285 } else if (pass == 3) {
286 if ( $4 != "" ) {
287 short_comment[key] = $4 ;
288 }
289 if ( $5 != "" ) {
290 long_comment[key] = $5 ;
291 }
292 record[key] = merge_attrs(record[key], $6);
293 }
294 }
295
296 type == "prof" {
297 key = $1 ":" $2 ":" $3 ;
298 if (pass == 1) {
299 comment[key] = $4;
300 record[key] = $5;
301 } else if (pass == 2) {
302 delete comment[key];
303 delete record[key];
304 } else if (pass == 3) {
305 if ( $4 != "" ) {
306 comment[key] = $4 ;
307 }
308 if (key != "::") {
309 record[key] = merge_attrs(record[key], $5);
310 }
311 }
312 }
313
314 type == "exec" {
315 key = $1 ":" $2 ":" $3 ":" $4 ":" $5 ":" $6 ;
316 if (pass == 1) {
317 record[key] = $7;
318 } else if (pass == 2) {
319 # For exec_attr, deletion is based on the 'name' field only,
320 # so that all old entries for the profile are removed.
321 for (oldkey in record) {
322 split_escape(oldkey, oldkey_fields, ":");
323 if (oldkey_fields[1] == $1)
324 delete record[oldkey];
325 }
326 } else if (pass == 3) {
327 # Substitute new entries, do not merge.
328 record[key] = $7;
329 }
330 }
331
332 type == "user" {
333 key = $1 ":" $2 ":" $3 ":" $4 ;
334 if (pass == 1) {
335 record[key] = $5;
336 } else if (pass == 2) {
337 if ($1 != "root")
338 delete record[key];
339 } else if (pass == 3) {
340 record[key] = merge_attrs(record[key], $5);
341 }
342 }
343
344 END {
345 for (key in record) {
346 if (type == "prof") {
347 if (key != "::") {
348 print key ":" comment[key] ":" record[key];
349 }
350 } else
351 if (type == "auth") {
352 print key ":" short_comment[key] ":" \
353 long_comment[key] ":" record[key];
354 } else
355 print key ":" record[key];
356 }
357 }
358
359 function merge_attrs(old, new, cnt, new_cnt, i, j, list, new_list, keyword)
360 {
361 cnt = split_escape(old, list, ";");
362 new_cnt = split_escape(new, new_list, ";");
363 for (i = 1; i <= new_cnt; i++) {
364 keyword = substr(new_list[i], 1, index(new_list[i], "=")-1);
365 for (j = 1; j <= cnt; j++) {
366 if (match(list[j], "^" keyword "=")) {
367 list[j] = merge_values(keyword, list[j],
368 new_list[i]);
369 break;
370 }
371 }
372 if (j > cnt)
373 list[++cnt] = new_list[i];
374 }
375
376 return unsplit(list, cnt, ";"); \
377 }
378
379 function merge_values(keyword, old, new, cnt, new_cnt, i, j, list, new_list, d)
380 {
381 # Keywords with multivalued attributes that are subject to merging
382 # are processed by the algorithm implemented further below.
383 # Otherwise, the keyword is not subject to merging, and:
384 # For user_attr, the existing value is retained.
385 # For any other file, the new value is substituted.
386 if (keyword_behavior[type, keyword] != "merge") {
387 if (type == "user") {
388 return old;
389 } else {
390 return new;
391 }
392 }
393
394 cnt = split(substr(old, length(keyword)+2), list, ",");
395 new_cnt = split(substr(new, length(keyword)+2), new_list, ",");
396
397 # If the existing list contains "All", remove it and add it
398 # to the new list; that way "All" will appear at the only valid
399 # location, the end of the list.
400 if (keyword == "profiles") {
401 d = 0;
402 for (i = 1; i <= cnt; i++) {
403 if (list[i] != "All")
404 list[++d] = list[i];
405 }
406 if (cnt != d) {
407 new_list[++new_cnt] = "All";
408 cnt = d;
409 }
410 }
411 for (i = 1; i <= new_cnt; i++) {
412 for (j = 1; j <= cnt; j++) {
413 if (list[j] == new_list[i])
414 break;
415 }
416 if (j > cnt)
417 list[++cnt] = new_list[i];
418 }
419
420 return keyword "=" unsplit(list, cnt, ",");
421 }
422
423 # This function is similar to the nawk built-in split() function,
424 # except that a "\" character may be used to escape any subsequent
425 # character, so that the escaped character will not be treated as a
426 # field separator or as part of a field separator regular expression.
427 # The "\" characters will remain in the elements of the output array
428 # variable upon completion.
429 function split_escape(str, list, fs, cnt, saved, sep)
430 {
431 # default to global FS
432 if (fs == "")
433 fs = FS;
434 # initialize empty list, cnt, saved
435 split("", list, " ");
436 cnt = 0;
437 saved = "";
438 # track whether last token was a field separator
439 sep = 0;
440 # nonzero str length indicates more string left to scan
441 while (length(str)) {
442 if (match(str, fs) == 1) {
443 # field separator, terminates current field
444 list[++cnt] = saved;
445 saved = "";
446 str = substr(str, RLENGTH + 1);
447 sep = 1;
448 } else if (substr(str, 1, 1) == "\\") {
449 # escaped character
450 saved = saved substr(str, 1, 2);
451 str = substr(str, 3);
452 sep = 0;
453 } else {
454 # regular character
455 saved = saved substr(str, 1, 1);
456 str = substr(str, 2);
457 sep = 0;
458 }
459 }
460 # if required, append final field to list
461 if (sep || length(saved))
462 list[++cnt] = saved;
463
464 return cnt;
465 }
466
467 function unsplit(list, cnt, delim, str)
468 {
469 str = list[1];
470 for (i = 2; i <= cnt; i++)
471 str = str delim list[i];
472 return str;
473 }' \
474 type=$1 $nawk_pass1 $nawk_pass2 $nawk_pass3 > $4.unsorted
475 rc=$?
476 $sort_cmd < $4.unsorted >> $4
477 return $rc
478 }
479
480 # $1 is the merged file
481 # $2 is the target file
482 #
483 commit() {
484 # Make sure that the last mv uses rename(2) by first moving to
485 # the same filesystem.
486 $mv_cmd $1 $2.$$
487 $mv_cmd $2.$$ $2
488 return $?
489 }
490
491 outfile=""
492 type=""
493 set_type_and_outfile() {
494 #
495 # Assumes basename $1 returns one of
496 # prof_attr, exec_attr, auth_attr, or user_attr
497 #
498 fname=`$basename_cmd $1`
499 type=`echo $fname | $sed_cmd -e s'/^\([a-z][a-z]*\)_attr$/\1/' `
500 case "$type" in
501 "prof"|"exec"|"user"|"auth") ;;
502 *) return 2 ;;
503 esac
504
505 outfile=$tmp_dir/rbac_${PKGINST}_${fname}_merge.$$
506
507 return 0
508 }
509
510 cleanup() {
511 $rm_cmd -f $outfile $outfile.old $outfile.new $outfile.unsorted
512
513 return 0
514 }
515
516 exit_status=0
517
518 # main
519
520 while read newfile oldfile ; do
521 if [ -n "$PKGINST" ]
522 then
523 # Install the file in the "fragment" directory.
524 mkdir -m 755 -p ${oldfile}.d
525 rm -f ${oldfile}.d/"$PKGINST"
526 cp $newfile ${oldfile}.d/"$PKGINST"
527
528 # Make sure that it is marked read-only.
529 chmod a-w,a+r ${oldfile}.d/"$PKGINST"
530
531 # We also execute the rest of the i.rbac script.
532 fi
533
534 if [ ! -f $oldfile ]; then
535 cp $newfile $oldfile
536 else
537 set_type_and_outfile $newfile ||
538 set_type_and_outfile $oldfile
539 if [ $? -ne 0 ]; then
540 echo "$0 : $newfile not one of" \
541 " prof_attr, exec_attr, auth_attr, user_attr"
542 exit_status=2
543 continue
544 fi
545
546 dbmerge $type $oldfile $newfile $outfile
547 if [ $? -ne 0 ]; then
548 echo "$0 : failed to merge $newfile with $oldfile"
549 cleanup
550 exit_status=2
551 continue
552 fi
553
554 commit $outfile $oldfile
555 if [ $? -ne 0 ]; then
556 echo "$0 : failed to mv $outfile to $2"
557 cleanup
558 exit_status=2
559 continue
560 fi
561
562 cleanup
563 fi
564 done
565
566 if [ "$1" = "ENDOFCLASS" ]; then
567 exit 0
568 fi
569
570 exit $exit_status