1 /*
   2  * CDDL HEADER START
   3  *
   4  * The contents of this file are subject to the terms of the
   5  * Common Development and Distribution License (the "License").
   6  * You may not use this file except in compliance with the License.
   7  *
   8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9  * or http://www.opensolaris.org/os/licensing.
  10  * See the License for the specific language governing permissions
  11  * and limitations under the License.
  12  *
  13  * When distributing Covered Code, include this CDDL HEADER in each
  14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15  * If applicable, add the following below this CDDL HEADER, with the
  16  * fields enclosed by brackets "[]" replaced with your own identifying
  17  * information: Portions Copyright [yyyy] [name of copyright owner]
  18  *
  19  * CDDL HEADER END
  20  */
  21 
  22 /*
  23  * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
  24  * Copyright (c) 2011, 2014 by Delphix. All rights reserved.
  25  * Copyright 2011 Nexenta Systems, Inc. All rights reserved.
  26  * Copyright (c) 2012, Joyent, Inc. All rights reserved.
  27  * Copyright 2013 DEY Storage Systems, Inc.
  28  */
  29 
  30 /* Portions Copyright 2010 Robert Milkowski */
  31 
  32 #ifndef _SYS_DMU_H
  33 #define _SYS_DMU_H
  34 
  35 /*
  36  * This file describes the interface that the DMU provides for its
  37  * consumers.
  38  *
  39  * The DMU also interacts with the SPA.  That interface is described in
  40  * dmu_spa.h.
  41  */
  42 
  43 #include <sys/inttypes.h>
  44 #include <sys/types.h>
  45 #include <sys/param.h>
  46 #include <sys/cred.h>
  47 #include <sys/time.h>
  48 #include <sys/fs/zfs.h>
  49 
  50 #ifdef  __cplusplus
  51 extern "C" {
  52 #endif
  53 
  54 struct uio;
  55 struct xuio;
  56 struct page;
  57 struct vnode;
  58 struct spa;
  59 struct zilog;
  60 struct zio;
  61 struct blkptr;
  62 struct zap_cursor;
  63 struct dsl_dataset;
  64 struct dsl_pool;
  65 struct dnode;
  66 struct drr_begin;
  67 struct drr_end;
  68 struct zbookmark;
  69 struct spa;
  70 struct nvlist;
  71 struct arc_buf;
  72 struct zio_prop;
  73 struct sa_handle;
  74 
  75 typedef struct objset objset_t;
  76 typedef struct dmu_tx dmu_tx_t;
  77 typedef struct dsl_dir dsl_dir_t;
  78 
  79 typedef enum dmu_object_byteswap {
  80         DMU_BSWAP_UINT8,
  81         DMU_BSWAP_UINT16,
  82         DMU_BSWAP_UINT32,
  83         DMU_BSWAP_UINT64,
  84         DMU_BSWAP_ZAP,
  85         DMU_BSWAP_DNODE,
  86         DMU_BSWAP_OBJSET,
  87         DMU_BSWAP_ZNODE,
  88         DMU_BSWAP_OLDACL,
  89         DMU_BSWAP_ACL,
  90         /*
  91          * Allocating a new byteswap type number makes the on-disk format
  92          * incompatible with any other format that uses the same number.
  93          *
  94          * Data can usually be structured to work with one of the
  95          * DMU_BSWAP_UINT* or DMU_BSWAP_ZAP types.
  96          */
  97         DMU_BSWAP_NUMFUNCS
  98 } dmu_object_byteswap_t;
  99 
 100 #define DMU_OT_NEWTYPE 0x80
 101 #define DMU_OT_METADATA 0x40
 102 #define DMU_OT_BYTESWAP_MASK 0x3f
 103 
 104 /*
 105  * Defines a uint8_t object type. Object types specify if the data
 106  * in the object is metadata (boolean) and how to byteswap the data
 107  * (dmu_object_byteswap_t).
 108  */
 109 #define DMU_OT(byteswap, metadata) \
 110         (DMU_OT_NEWTYPE | \
 111         ((metadata) ? DMU_OT_METADATA : 0) | \
 112         ((byteswap) & DMU_OT_BYTESWAP_MASK))
 113 
 114 #define DMU_OT_IS_VALID(ot) (((ot) & DMU_OT_NEWTYPE) ? \
 115         ((ot) & DMU_OT_BYTESWAP_MASK) < DMU_BSWAP_NUMFUNCS : \
 116         (ot) < DMU_OT_NUMTYPES)
 117 
 118 #define DMU_OT_IS_METADATA(ot) (((ot) & DMU_OT_NEWTYPE) ? \
 119         ((ot) & DMU_OT_METADATA) : \
 120         dmu_ot[(ot)].ot_metadata)
 121 
 122 /*
 123  * These object types use bp_fill != 1 for their L0 bp's. Therefore they can't
 124  * have their data embedded (i.e. use a BP_IS_EMBEDDED() bp), because bp_fill
 125  * is repurposed for embedded BPs.
 126  */
 127 #define DMU_OT_HAS_FILL(ot) \
 128         ((ot) == DMU_OT_DNODE || (ot) == DMU_OT_OBJSET)
 129 
 130 #define DMU_OT_BYTESWAP(ot) (((ot) & DMU_OT_NEWTYPE) ? \
 131         ((ot) & DMU_OT_BYTESWAP_MASK) : \
 132         dmu_ot[(ot)].ot_byteswap)
 133 
 134 typedef enum dmu_object_type {
 135         DMU_OT_NONE,
 136         /* general: */
 137         DMU_OT_OBJECT_DIRECTORY,        /* ZAP */
 138         DMU_OT_OBJECT_ARRAY,            /* UINT64 */
 139         DMU_OT_PACKED_NVLIST,           /* UINT8 (XDR by nvlist_pack/unpack) */
 140         DMU_OT_PACKED_NVLIST_SIZE,      /* UINT64 */
 141         DMU_OT_BPOBJ,                   /* UINT64 */
 142         DMU_OT_BPOBJ_HDR,               /* UINT64 */
 143         /* spa: */
 144         DMU_OT_SPACE_MAP_HEADER,        /* UINT64 */
 145         DMU_OT_SPACE_MAP,               /* UINT64 */
 146         /* zil: */
 147         DMU_OT_INTENT_LOG,              /* UINT64 */
 148         /* dmu: */
 149         DMU_OT_DNODE,                   /* DNODE */
 150         DMU_OT_OBJSET,                  /* OBJSET */
 151         /* dsl: */
 152         DMU_OT_DSL_DIR,                 /* UINT64 */
 153         DMU_OT_DSL_DIR_CHILD_MAP,       /* ZAP */
 154         DMU_OT_DSL_DS_SNAP_MAP,         /* ZAP */
 155         DMU_OT_DSL_PROPS,               /* ZAP */
 156         DMU_OT_DSL_DATASET,             /* UINT64 */
 157         /* zpl: */
 158         DMU_OT_ZNODE,                   /* ZNODE */
 159         DMU_OT_OLDACL,                  /* Old ACL */
 160         DMU_OT_PLAIN_FILE_CONTENTS,     /* UINT8 */
 161         DMU_OT_DIRECTORY_CONTENTS,      /* ZAP */
 162         DMU_OT_MASTER_NODE,             /* ZAP */
 163         DMU_OT_UNLINKED_SET,            /* ZAP */
 164         /* zvol: */
 165         DMU_OT_ZVOL,                    /* UINT8 */
 166         DMU_OT_ZVOL_PROP,               /* ZAP */
 167         /* other; for testing only! */
 168         DMU_OT_PLAIN_OTHER,             /* UINT8 */
 169         DMU_OT_UINT64_OTHER,            /* UINT64 */
 170         DMU_OT_ZAP_OTHER,               /* ZAP */
 171         /* new object types: */
 172         DMU_OT_ERROR_LOG,               /* ZAP */
 173         DMU_OT_SPA_HISTORY,             /* UINT8 */
 174         DMU_OT_SPA_HISTORY_OFFSETS,     /* spa_his_phys_t */
 175         DMU_OT_POOL_PROPS,              /* ZAP */
 176         DMU_OT_DSL_PERMS,               /* ZAP */
 177         DMU_OT_ACL,                     /* ACL */
 178         DMU_OT_SYSACL,                  /* SYSACL */
 179         DMU_OT_FUID,                    /* FUID table (Packed NVLIST UINT8) */
 180         DMU_OT_FUID_SIZE,               /* FUID table size UINT64 */
 181         DMU_OT_NEXT_CLONES,             /* ZAP */
 182         DMU_OT_SCAN_QUEUE,              /* ZAP */
 183         DMU_OT_USERGROUP_USED,          /* ZAP */
 184         DMU_OT_USERGROUP_QUOTA,         /* ZAP */
 185         DMU_OT_USERREFS,                /* ZAP */
 186         DMU_OT_DDT_ZAP,                 /* ZAP */
 187         DMU_OT_DDT_STATS,               /* ZAP */
 188         DMU_OT_SA,                      /* System attr */
 189         DMU_OT_SA_MASTER_NODE,          /* ZAP */
 190         DMU_OT_SA_ATTR_REGISTRATION,    /* ZAP */
 191         DMU_OT_SA_ATTR_LAYOUTS,         /* ZAP */
 192         DMU_OT_SCAN_XLATE,              /* ZAP */
 193         DMU_OT_DEDUP,                   /* fake dedup BP from ddt_bp_create() */
 194         DMU_OT_DEADLIST,                /* ZAP */
 195         DMU_OT_DEADLIST_HDR,            /* UINT64 */
 196         DMU_OT_DSL_CLONES,              /* ZAP */
 197         DMU_OT_BPOBJ_SUBOBJ,            /* UINT64 */
 198         /*
 199          * Do not allocate new object types here. Doing so makes the on-disk
 200          * format incompatible with any other format that uses the same object
 201          * type number.
 202          *
 203          * When creating an object which does not have one of the above types
 204          * use the DMU_OTN_* type with the correct byteswap and metadata
 205          * values.
 206          *
 207          * The DMU_OTN_* types do not have entries in the dmu_ot table,
 208          * use the DMU_OT_IS_METDATA() and DMU_OT_BYTESWAP() macros instead
 209          * of indexing into dmu_ot directly (this works for both DMU_OT_* types
 210          * and DMU_OTN_* types).
 211          */
 212         DMU_OT_NUMTYPES,
 213 
 214         /*
 215          * Names for valid types declared with DMU_OT().
 216          */
 217         DMU_OTN_UINT8_DATA = DMU_OT(DMU_BSWAP_UINT8, B_FALSE),
 218         DMU_OTN_UINT8_METADATA = DMU_OT(DMU_BSWAP_UINT8, B_TRUE),
 219         DMU_OTN_UINT16_DATA = DMU_OT(DMU_BSWAP_UINT16, B_FALSE),
 220         DMU_OTN_UINT16_METADATA = DMU_OT(DMU_BSWAP_UINT16, B_TRUE),
 221         DMU_OTN_UINT32_DATA = DMU_OT(DMU_BSWAP_UINT32, B_FALSE),
 222         DMU_OTN_UINT32_METADATA = DMU_OT(DMU_BSWAP_UINT32, B_TRUE),
 223         DMU_OTN_UINT64_DATA = DMU_OT(DMU_BSWAP_UINT64, B_FALSE),
 224         DMU_OTN_UINT64_METADATA = DMU_OT(DMU_BSWAP_UINT64, B_TRUE),
 225         DMU_OTN_ZAP_DATA = DMU_OT(DMU_BSWAP_ZAP, B_FALSE),
 226         DMU_OTN_ZAP_METADATA = DMU_OT(DMU_BSWAP_ZAP, B_TRUE),
 227 } dmu_object_type_t;
 228 
 229 typedef enum txg_how {
 230         TXG_WAIT = 1,
 231         TXG_NOWAIT,
 232         TXG_WAITED,
 233 } txg_how_t;
 234 
 235 void byteswap_uint64_array(void *buf, size_t size);
 236 void byteswap_uint32_array(void *buf, size_t size);
 237 void byteswap_uint16_array(void *buf, size_t size);
 238 void byteswap_uint8_array(void *buf, size_t size);
 239 void zap_byteswap(void *buf, size_t size);
 240 void zfs_oldacl_byteswap(void *buf, size_t size);
 241 void zfs_acl_byteswap(void *buf, size_t size);
 242 void zfs_znode_byteswap(void *buf, size_t size);
 243 
 244 #define DS_FIND_SNAPSHOTS       (1<<0)
 245 #define DS_FIND_CHILDREN        (1<<1)
 246 
 247 /*
 248  * The maximum number of bytes that can be accessed as part of one
 249  * operation, including metadata.
 250  */
 251 #define DMU_MAX_ACCESS (10<<20) /* 10MB */
 252 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */
 253 
 254 #define DMU_USERUSED_OBJECT     (-1ULL)
 255 #define DMU_GROUPUSED_OBJECT    (-2ULL)
 256 
 257 /*
 258  * artificial blkids for bonus buffer and spill blocks
 259  */
 260 #define DMU_BONUS_BLKID         (-1ULL)
 261 #define DMU_SPILL_BLKID         (-2ULL)
 262 /*
 263  * Public routines to create, destroy, open, and close objsets.
 264  */
 265 int dmu_objset_hold(const char *name, void *tag, objset_t **osp);
 266 int dmu_objset_own(const char *name, dmu_objset_type_t type,
 267     boolean_t readonly, void *tag, objset_t **osp);
 268 void dmu_objset_rele(objset_t *os, void *tag);
 269 void dmu_objset_disown(objset_t *os, void *tag);
 270 int dmu_objset_open_ds(struct dsl_dataset *ds, objset_t **osp);
 271 
 272 void dmu_objset_evict_dbufs(objset_t *os);
 273 int dmu_objset_create(const char *name, dmu_objset_type_t type, uint64_t flags,
 274     void (*func)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx), void *arg);
 275 int dmu_objset_clone(const char *name, const char *origin);
 276 int dsl_destroy_snapshots_nvl(struct nvlist *snaps, boolean_t defer,
 277     struct nvlist *errlist);
 278 int dmu_objset_snapshot_one(const char *fsname, const char *snapname);
 279 int dmu_objset_snapshot_tmp(const char *, const char *, int);
 280 int dmu_objset_find(char *name, int func(const char *, void *), void *arg,
 281     int flags);
 282 void dmu_objset_byteswap(void *buf, size_t size);
 283 int dsl_dataset_rename_snapshot(const char *fsname,
 284     const char *oldsnapname, const char *newsnapname, boolean_t recursive);
 285 
 286 typedef struct dmu_buf {
 287         uint64_t db_object;             /* object that this buffer is part of */
 288         uint64_t db_offset;             /* byte offset in this object */
 289         uint64_t db_size;               /* size of buffer in bytes */
 290         void *db_data;                  /* data in buffer */
 291 } dmu_buf_t;
 292 
 293 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr);
 294 
 295 /*
 296  * The names of zap entries in the DIRECTORY_OBJECT of the MOS.
 297  */
 298 #define DMU_POOL_DIRECTORY_OBJECT       1
 299 #define DMU_POOL_CONFIG                 "config"
 300 #define DMU_POOL_FEATURES_FOR_WRITE     "features_for_write"
 301 #define DMU_POOL_FEATURES_FOR_READ      "features_for_read"
 302 #define DMU_POOL_FEATURE_DESCRIPTIONS   "feature_descriptions"
 303 #define DMU_POOL_FEATURE_ENABLED_TXG    "feature_enabled_txg"
 304 #define DMU_POOL_ROOT_DATASET           "root_dataset"
 305 #define DMU_POOL_SYNC_BPOBJ             "sync_bplist"
 306 #define DMU_POOL_ERRLOG_SCRUB           "errlog_scrub"
 307 #define DMU_POOL_ERRLOG_LAST            "errlog_last"
 308 #define DMU_POOL_SPARES                 "spares"
 309 #define DMU_POOL_DEFLATE                "deflate"
 310 #define DMU_POOL_HISTORY                "history"
 311 #define DMU_POOL_PROPS                  "pool_props"
 312 #define DMU_POOL_L2CACHE                "l2cache"
 313 #define DMU_POOL_TMP_USERREFS           "tmp_userrefs"
 314 #define DMU_POOL_DDT                    "DDT-%s-%s-%s"
 315 #define DMU_POOL_DDT_STATS              "DDT-statistics"
 316 #define DMU_POOL_CREATION_VERSION       "creation_version"
 317 #define DMU_POOL_SCAN                   "scan"
 318 #define DMU_POOL_FREE_BPOBJ             "free_bpobj"
 319 #define DMU_POOL_BPTREE_OBJ             "bptree_obj"
 320 #define DMU_POOL_EMPTY_BPOBJ            "empty_bpobj"
 321 
 322 /*
 323  * Allocate an object from this objset.  The range of object numbers
 324  * available is (0, DN_MAX_OBJECT).  Object 0 is the meta-dnode.
 325  *
 326  * The transaction must be assigned to a txg.  The newly allocated
 327  * object will be "held" in the transaction (ie. you can modify the
 328  * newly allocated object in this transaction).
 329  *
 330  * dmu_object_alloc() chooses an object and returns it in *objectp.
 331  *
 332  * dmu_object_claim() allocates a specific object number.  If that
 333  * number is already allocated, it fails and returns EEXIST.
 334  *
 335  * Return 0 on success, or ENOSPC or EEXIST as specified above.
 336  */
 337 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot,
 338     int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx);
 339 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot,
 340     int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx);
 341 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot,
 342     int blocksize, dmu_object_type_t bonustype, int bonuslen);
 343 
 344 /*
 345  * Free an object from this objset.
 346  *
 347  * The object's data will be freed as well (ie. you don't need to call
 348  * dmu_free(object, 0, -1, tx)).
 349  *
 350  * The object need not be held in the transaction.
 351  *
 352  * If there are any holds on this object's buffers (via dmu_buf_hold()),
 353  * or tx holds on the object (via dmu_tx_hold_object()), you can not
 354  * free it; it fails and returns EBUSY.
 355  *
 356  * If the object is not allocated, it fails and returns ENOENT.
 357  *
 358  * Return 0 on success, or EBUSY or ENOENT as specified above.
 359  */
 360 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx);
 361 
 362 /*
 363  * Find the next allocated or free object.
 364  *
 365  * The objectp parameter is in-out.  It will be updated to be the next
 366  * object which is allocated.  Ignore objects which have not been
 367  * modified since txg.
 368  *
 369  * XXX Can only be called on a objset with no dirty data.
 370  *
 371  * Returns 0 on success, or ENOENT if there are no more objects.
 372  */
 373 int dmu_object_next(objset_t *os, uint64_t *objectp,
 374     boolean_t hole, uint64_t txg);
 375 
 376 /*
 377  * Set the data blocksize for an object.
 378  *
 379  * The object cannot have any blocks allcated beyond the first.  If
 380  * the first block is allocated already, the new size must be greater
 381  * than the current block size.  If these conditions are not met,
 382  * ENOTSUP will be returned.
 383  *
 384  * Returns 0 on success, or EBUSY if there are any holds on the object
 385  * contents, or ENOTSUP as described above.
 386  */
 387 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size,
 388     int ibs, dmu_tx_t *tx);
 389 
 390 /*
 391  * Set the checksum property on a dnode.  The new checksum algorithm will
 392  * apply to all newly written blocks; existing blocks will not be affected.
 393  */
 394 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum,
 395     dmu_tx_t *tx);
 396 
 397 /*
 398  * Set the compress property on a dnode.  The new compression algorithm will
 399  * apply to all newly written blocks; existing blocks will not be affected.
 400  */
 401 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress,
 402     dmu_tx_t *tx);
 403 
 404 void
 405 dmu_write_embedded(objset_t *os, uint64_t object, uint64_t offset,
 406     void *data, uint8_t etype, uint8_t comp, int uncompressed_size,
 407     int compressed_size, int byteorder, dmu_tx_t *tx);
 408 
 409 /*
 410  * Decide how to write a block: checksum, compression, number of copies, etc.
 411  */
 412 #define WP_NOFILL       0x1
 413 #define WP_DMU_SYNC     0x2
 414 #define WP_SPILL        0x4
 415 
 416 void dmu_write_policy(objset_t *os, struct dnode *dn, int level, int wp,
 417     struct zio_prop *zp);
 418 /*
 419  * The bonus data is accessed more or less like a regular buffer.
 420  * You must dmu_bonus_hold() to get the buffer, which will give you a
 421  * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus
 422  * data.  As with any normal buffer, you must call dmu_buf_read() to
 423  * read db_data, dmu_buf_will_dirty() before modifying it, and the
 424  * object must be held in an assigned transaction before calling
 425  * dmu_buf_will_dirty.  You may use dmu_buf_set_user() on the bonus
 426  * buffer as well.  You must release your hold with dmu_buf_rele().
 427  *
 428  * Returns ENOENT, EIO, or 0.
 429  */
 430 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **);
 431 int dmu_bonus_max(void);
 432 int dmu_set_bonus(dmu_buf_t *, int, dmu_tx_t *);
 433 int dmu_set_bonustype(dmu_buf_t *, dmu_object_type_t, dmu_tx_t *);
 434 dmu_object_type_t dmu_get_bonustype(dmu_buf_t *);
 435 int dmu_rm_spill(objset_t *, uint64_t, dmu_tx_t *);
 436 
 437 /*
 438  * Special spill buffer support used by "SA" framework
 439  */
 440 
 441 int dmu_spill_hold_by_bonus(dmu_buf_t *bonus, void *tag, dmu_buf_t **dbp);
 442 int dmu_spill_hold_by_dnode(struct dnode *dn, uint32_t flags,
 443     void *tag, dmu_buf_t **dbp);
 444 int dmu_spill_hold_existing(dmu_buf_t *bonus, void *tag, dmu_buf_t **dbp);
 445 
 446 /*
 447  * Obtain the DMU buffer from the specified object which contains the
 448  * specified offset.  dmu_buf_hold() puts a "hold" on the buffer, so
 449  * that it will remain in memory.  You must release the hold with
 450  * dmu_buf_rele().  You musn't access the dmu_buf_t after releasing your
 451  * hold.  You must have a hold on any dmu_buf_t* you pass to the DMU.
 452  *
 453  * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill
 454  * on the returned buffer before reading or writing the buffer's
 455  * db_data.  The comments for those routines describe what particular
 456  * operations are valid after calling them.
 457  *
 458  * The object number must be a valid, allocated object number.
 459  */
 460 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset,
 461     void *tag, dmu_buf_t **, int flags);
 462 void dmu_buf_add_ref(dmu_buf_t *db, void* tag);
 463 void dmu_buf_rele(dmu_buf_t *db, void *tag);
 464 uint64_t dmu_buf_refcount(dmu_buf_t *db);
 465 
 466 /*
 467  * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a
 468  * range of an object.  A pointer to an array of dmu_buf_t*'s is
 469  * returned (in *dbpp).
 470  *
 471  * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and
 472  * frees the array.  The hold on the array of buffers MUST be released
 473  * with dmu_buf_rele_array.  You can NOT release the hold on each buffer
 474  * individually with dmu_buf_rele.
 475  */
 476 int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset,
 477     uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp);
 478 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag);
 479 
 480 /*
 481  * Returns NULL on success, or the existing user ptr if it's already
 482  * been set.
 483  *
 484  * user_ptr is for use by the user and can be obtained via dmu_buf_get_user().
 485  *
 486  * user_data_ptr_ptr should be NULL, or a pointer to a pointer which
 487  * will be set to db->db_data when you are allowed to access it.  Note
 488  * that db->db_data (the pointer) can change when you do dmu_buf_read(),
 489  * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill().
 490  * *user_data_ptr_ptr will be set to the new value when it changes.
 491  *
 492  * If non-NULL, pageout func will be called when this buffer is being
 493  * excised from the cache, so that you can clean up the data structure
 494  * pointed to by user_ptr.
 495  *
 496  * dmu_evict_user() will call the pageout func for all buffers in a
 497  * objset with a given pageout func.
 498  */
 499 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr,
 500     dmu_buf_evict_func_t *pageout_func);
 501 /*
 502  * set_user_ie is the same as set_user, but request immediate eviction
 503  * when hold count goes to zero.
 504  */
 505 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr,
 506     void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func);
 507 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr,
 508     void *user_ptr, void *user_data_ptr_ptr,
 509     dmu_buf_evict_func_t *pageout_func);
 510 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func);
 511 
 512 /*
 513  * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set.
 514  */
 515 void *dmu_buf_get_user(dmu_buf_t *db);
 516 
 517 /*
 518  * Returns the blkptr associated with this dbuf, or NULL if not set.
 519  */
 520 struct blkptr *dmu_buf_get_blkptr(dmu_buf_t *db);
 521 
 522 /*
 523  * Indicate that you are going to modify the buffer's data (db_data).
 524  *
 525  * The transaction (tx) must be assigned to a txg (ie. you've called
 526  * dmu_tx_assign()).  The buffer's object must be held in the tx
 527  * (ie. you've called dmu_tx_hold_object(tx, db->db_object)).
 528  */
 529 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx);
 530 
 531 /*
 532  * Tells if the given dbuf is freeable.
 533  */
 534 boolean_t dmu_buf_freeable(dmu_buf_t *);
 535 
 536 /*
 537  * You must create a transaction, then hold the objects which you will
 538  * (or might) modify as part of this transaction.  Then you must assign
 539  * the transaction to a transaction group.  Once the transaction has
 540  * been assigned, you can modify buffers which belong to held objects as
 541  * part of this transaction.  You can't modify buffers before the
 542  * transaction has been assigned; you can't modify buffers which don't
 543  * belong to objects which this transaction holds; you can't hold
 544  * objects once the transaction has been assigned.  You may hold an
 545  * object which you are going to free (with dmu_object_free()), but you
 546  * don't have to.
 547  *
 548  * You can abort the transaction before it has been assigned.
 549  *
 550  * Note that you may hold buffers (with dmu_buf_hold) at any time,
 551  * regardless of transaction state.
 552  */
 553 
 554 #define DMU_NEW_OBJECT  (-1ULL)
 555 #define DMU_OBJECT_END  (-1ULL)
 556 
 557 dmu_tx_t *dmu_tx_create(objset_t *os);
 558 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len);
 559 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off,
 560     uint64_t len);
 561 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, const char *name);
 562 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object);
 563 void dmu_tx_hold_spill(dmu_tx_t *tx, uint64_t object);
 564 void dmu_tx_hold_sa(dmu_tx_t *tx, struct sa_handle *hdl, boolean_t may_grow);
 565 void dmu_tx_hold_sa_create(dmu_tx_t *tx, int total_size);
 566 void dmu_tx_abort(dmu_tx_t *tx);
 567 int dmu_tx_assign(dmu_tx_t *tx, enum txg_how txg_how);
 568 void dmu_tx_wait(dmu_tx_t *tx);
 569 void dmu_tx_commit(dmu_tx_t *tx);
 570 
 571 /*
 572  * To register a commit callback, dmu_tx_callback_register() must be called.
 573  *
 574  * dcb_data is a pointer to caller private data that is passed on as a
 575  * callback parameter. The caller is responsible for properly allocating and
 576  * freeing it.
 577  *
 578  * When registering a callback, the transaction must be already created, but
 579  * it cannot be committed or aborted. It can be assigned to a txg or not.
 580  *
 581  * The callback will be called after the transaction has been safely written
 582  * to stable storage and will also be called if the dmu_tx is aborted.
 583  * If there is any error which prevents the transaction from being committed to
 584  * disk, the callback will be called with a value of error != 0.
 585  */
 586 typedef void dmu_tx_callback_func_t(void *dcb_data, int error);
 587 
 588 void dmu_tx_callback_register(dmu_tx_t *tx, dmu_tx_callback_func_t *dcb_func,
 589     void *dcb_data);
 590 
 591 /*
 592  * Free up the data blocks for a defined range of a file.  If size is
 593  * -1, the range from offset to end-of-file is freed.
 594  */
 595 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset,
 596         uint64_t size, dmu_tx_t *tx);
 597 int dmu_free_long_range(objset_t *os, uint64_t object, uint64_t offset,
 598         uint64_t size);
 599 int dmu_free_long_object(objset_t *os, uint64_t object);
 600 
 601 /*
 602  * Convenience functions.
 603  *
 604  * Canfail routines will return 0 on success, or an errno if there is a
 605  * nonrecoverable I/O error.
 606  */
 607 #define DMU_READ_PREFETCH       0 /* prefetch */
 608 #define DMU_READ_NO_PREFETCH    1 /* don't prefetch */
 609 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size,
 610         void *buf, uint32_t flags);
 611 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size,
 612         const void *buf, dmu_tx_t *tx);
 613 void dmu_prealloc(objset_t *os, uint64_t object, uint64_t offset, uint64_t size,
 614         dmu_tx_t *tx);
 615 int dmu_read_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size);
 616 int dmu_write_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size,
 617     dmu_tx_t *tx);
 618 int dmu_write_uio_dbuf(dmu_buf_t *zdb, struct uio *uio, uint64_t size,
 619     dmu_tx_t *tx);
 620 int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset,
 621     uint64_t size, struct page *pp, dmu_tx_t *tx);
 622 struct arc_buf *dmu_request_arcbuf(dmu_buf_t *handle, int size);
 623 void dmu_return_arcbuf(struct arc_buf *buf);
 624 void dmu_assign_arcbuf(dmu_buf_t *handle, uint64_t offset, struct arc_buf *buf,
 625     dmu_tx_t *tx);
 626 int dmu_xuio_init(struct xuio *uio, int niov);
 627 void dmu_xuio_fini(struct xuio *uio);
 628 int dmu_xuio_add(struct xuio *uio, struct arc_buf *abuf, offset_t off,
 629     size_t n);
 630 int dmu_xuio_cnt(struct xuio *uio);
 631 struct arc_buf *dmu_xuio_arcbuf(struct xuio *uio, int i);
 632 void dmu_xuio_clear(struct xuio *uio, int i);
 633 void xuio_stat_wbuf_copied();
 634 void xuio_stat_wbuf_nocopy();
 635 
 636 extern int zfs_prefetch_disable;
 637 
 638 /*
 639  * Asynchronously try to read in the data.
 640  */
 641 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset,
 642     uint64_t len);
 643 
 644 typedef struct dmu_object_info {
 645         /* All sizes are in bytes unless otherwise indicated. */
 646         uint32_t doi_data_block_size;
 647         uint32_t doi_metadata_block_size;
 648         dmu_object_type_t doi_type;
 649         dmu_object_type_t doi_bonus_type;
 650         uint64_t doi_bonus_size;
 651         uint8_t doi_indirection;                /* 2 = dnode->indirect->data */
 652         uint8_t doi_checksum;
 653         uint8_t doi_compress;
 654         uint8_t doi_pad[5];
 655         uint64_t doi_physical_blocks_512;       /* data + metadata, 512b blks */
 656         uint64_t doi_max_offset;
 657         uint64_t doi_fill_count;                /* number of non-empty blocks */
 658 } dmu_object_info_t;
 659 
 660 typedef void arc_byteswap_func_t(void *buf, size_t size);
 661 
 662 typedef struct dmu_object_type_info {
 663         dmu_object_byteswap_t   ot_byteswap;
 664         boolean_t               ot_metadata;
 665         char                    *ot_name;
 666 } dmu_object_type_info_t;
 667 
 668 typedef struct dmu_object_byteswap_info {
 669         arc_byteswap_func_t     *ob_func;
 670         char                    *ob_name;
 671 } dmu_object_byteswap_info_t;
 672 
 673 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES];
 674 extern const dmu_object_byteswap_info_t dmu_ot_byteswap[DMU_BSWAP_NUMFUNCS];
 675 
 676 /*
 677  * Get information on a DMU object.
 678  *
 679  * Return 0 on success or ENOENT if object is not allocated.
 680  *
 681  * If doi is NULL, just indicates whether the object exists.
 682  */
 683 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi);
 684 /* Like dmu_object_info, but faster if you have a held dnode in hand. */
 685 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi);
 686 /* Like dmu_object_info, but faster if you have a held dbuf in hand. */
 687 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi);
 688 /*
 689  * Like dmu_object_info_from_db, but faster still when you only care about
 690  * the size.  This is specifically optimized for zfs_getattr().
 691  */
 692 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize,
 693     u_longlong_t *nblk512);
 694 
 695 typedef struct dmu_objset_stats {
 696         uint64_t dds_num_clones; /* number of clones of this */
 697         uint64_t dds_creation_txg;
 698         uint64_t dds_guid;
 699         dmu_objset_type_t dds_type;
 700         uint8_t dds_is_snapshot;
 701         uint8_t dds_inconsistent;
 702         char dds_origin[MAXNAMELEN];
 703 } dmu_objset_stats_t;
 704 
 705 /*
 706  * Get stats on a dataset.
 707  */
 708 void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat);
 709 
 710 /*
 711  * Add entries to the nvlist for all the objset's properties.  See
 712  * zfs_prop_table[] and zfs(1m) for details on the properties.
 713  */
 714 void dmu_objset_stats(objset_t *os, struct nvlist *nv);
 715 
 716 /*
 717  * Get the space usage statistics for statvfs().
 718  *
 719  * refdbytes is the amount of space "referenced" by this objset.
 720  * availbytes is the amount of space available to this objset, taking
 721  * into account quotas & reservations, assuming that no other objsets
 722  * use the space first.  These values correspond to the 'referenced' and
 723  * 'available' properties, described in the zfs(1m) manpage.
 724  *
 725  * usedobjs and availobjs are the number of objects currently allocated,
 726  * and available.
 727  */
 728 void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp,
 729     uint64_t *usedobjsp, uint64_t *availobjsp);
 730 
 731 /*
 732  * The fsid_guid is a 56-bit ID that can change to avoid collisions.
 733  * (Contrast with the ds_guid which is a 64-bit ID that will never
 734  * change, so there is a small probability that it will collide.)
 735  */
 736 uint64_t dmu_objset_fsid_guid(objset_t *os);
 737 
 738 /*
 739  * Get the [cm]time for an objset's snapshot dir
 740  */
 741 timestruc_t dmu_objset_snap_cmtime(objset_t *os);
 742 
 743 int dmu_objset_is_snapshot(objset_t *os);
 744 
 745 extern struct spa *dmu_objset_spa(objset_t *os);
 746 extern struct zilog *dmu_objset_zil(objset_t *os);
 747 extern struct dsl_pool *dmu_objset_pool(objset_t *os);
 748 extern struct dsl_dataset *dmu_objset_ds(objset_t *os);
 749 extern void dmu_objset_name(objset_t *os, char *buf);
 750 extern dmu_objset_type_t dmu_objset_type(objset_t *os);
 751 extern uint64_t dmu_objset_id(objset_t *os);
 752 extern zfs_sync_type_t dmu_objset_syncprop(objset_t *os);
 753 extern zfs_logbias_op_t dmu_objset_logbias(objset_t *os);
 754 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name,
 755     uint64_t *id, uint64_t *offp, boolean_t *case_conflict);
 756 extern int dmu_snapshot_realname(objset_t *os, char *name, char *real,
 757     int maxlen, boolean_t *conflict);
 758 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name,
 759     uint64_t *idp, uint64_t *offp);
 760 
 761 typedef int objset_used_cb_t(dmu_object_type_t bonustype,
 762     void *bonus, uint64_t *userp, uint64_t *groupp);
 763 extern void dmu_objset_register_type(dmu_objset_type_t ost,
 764     objset_used_cb_t *cb);
 765 extern void dmu_objset_set_user(objset_t *os, void *user_ptr);
 766 extern void *dmu_objset_get_user(objset_t *os);
 767 
 768 /*
 769  * Return the txg number for the given assigned transaction.
 770  */
 771 uint64_t dmu_tx_get_txg(dmu_tx_t *tx);
 772 
 773 /*
 774  * Synchronous write.
 775  * If a parent zio is provided this function initiates a write on the
 776  * provided buffer as a child of the parent zio.
 777  * In the absence of a parent zio, the write is completed synchronously.
 778  * At write completion, blk is filled with the bp of the written block.
 779  * Note that while the data covered by this function will be on stable
 780  * storage when the write completes this new data does not become a
 781  * permanent part of the file until the associated transaction commits.
 782  */
 783 
 784 /*
 785  * {zfs,zvol,ztest}_get_done() args
 786  */
 787 typedef struct zgd {
 788         struct zilog    *zgd_zilog;
 789         struct blkptr   *zgd_bp;
 790         dmu_buf_t       *zgd_db;
 791         struct rl       *zgd_rl;
 792         void            *zgd_private;
 793 } zgd_t;
 794 
 795 typedef void dmu_sync_cb_t(zgd_t *arg, int error);
 796 int dmu_sync(struct zio *zio, uint64_t txg, dmu_sync_cb_t *done, zgd_t *zgd);
 797 
 798 /*
 799  * Find the next hole or data block in file starting at *off
 800  * Return found offset in *off. Return ESRCH for end of file.
 801  */
 802 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole,
 803     uint64_t *off);
 804 
 805 /*
 806  * Initial setup and final teardown.
 807  */
 808 extern void dmu_init(void);
 809 extern void dmu_fini(void);
 810 
 811 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp,
 812     uint64_t object, uint64_t offset, int len);
 813 void dmu_traverse_objset(objset_t *os, uint64_t txg_start,
 814     dmu_traverse_cb_t cb, void *arg);
 815 
 816 int dmu_diff(const char *tosnap_name, const char *fromsnap_name,
 817     struct vnode *vp, offset_t *offp);
 818 
 819 /* CRC64 table */
 820 #define ZFS_CRC64_POLY  0xC96C5795D7870F42ULL   /* ECMA-182, reflected form */
 821 extern uint64_t zfs_crc64_table[256];
 822 
 823 extern int zfs_mdcomp_disable;
 824 
 825 #ifdef  __cplusplus
 826 }
 827 #endif
 828 
 829 #endif  /* _SYS_DMU_H */