1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21 /*
22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved.
23 * Use is subject to license terms.
24 */
25
26
27 /*
28 * This driver supports Prolific PL-2303H/HX/X USB-to-serial adapters. It is a
29 * device-specific driver (DSD) working with USB generic serial driver (GSD). It
30 * implements the USB-to-serial device-specific driver interface (DSDI) which is
31 * offered by GSD. The interface is defined by ds_ops_t structure.
32 *
33 *
34 * PL-2303HX and PL-2303X devices have different hardware, but from the
35 * perspective of device driver, they have the same software interface.
36 */
37
38 /*
39 *
40 * USB Prolific PL2303 driver glue code
41 *
42 */
43 #include <sys/types.h>
44 #include <sys/param.h>
45 #include <sys/stream.h>
46 #include <sys/conf.h>
47 #include <sys/ddi.h>
48 #include <sys/sunddi.h>
49
50 #include <sys/usb/clients/usbser/usbser.h>
51 #include <sys/usb/clients/usbser/usbsprl/pl2303_var.h>
52
53
54 /* configuration entry points */
55 static int usbser_pl2303_attach(dev_info_t *, ddi_attach_cmd_t);
56 static int usbser_pl2303_detach(dev_info_t *, ddi_detach_cmd_t);
57 static int usbser_pl2303_getinfo(dev_info_t *, ddi_info_cmd_t, void *,
58 void **);
59 static int usbser_pl2303_open(queue_t *, dev_t *, int, int, cred_t *);
60 static void *usbser_pl2303_statep; /* soft state */
61
62 extern ds_ops_t pl2303_ds_ops; /* DSD operations */
63
64
65 /*
66 * STREAMS structures
67 */
68 struct module_info usbser_pl2303_modinfo = {
69 0, /* module id */
70 "usbsprl", /* module name */
71 USBSER_MIN_PKTSZ, /* min pkt size */
72 USBSER_MAX_PKTSZ, /* max pkt size */
73 USBSER_HIWAT, /* hi watermark */
74 USBSER_LOWAT /* low watermark */
75 };
76
77
78 static struct qinit usbser_pl2303_rinit = {
79 putq,
80 usbser_rsrv,
81 usbser_pl2303_open,
82 usbser_close,
83 NULL,
84 &usbser_pl2303_modinfo,
85 NULL
86 };
87
88
89 static struct qinit usbser_pl2303_winit = {
90 usbser_wput,
91 usbser_wsrv,
92 NULL,
93 NULL,
94 NULL,
95 &usbser_pl2303_modinfo,
96 NULL
97 };
98
99
100 struct streamtab usbser_pl2303_str_info = {
101 &usbser_pl2303_rinit, &usbser_pl2303_winit, NULL, NULL
102 };
103
104
105 static struct cb_ops usbser_pl2303_cb_ops = {
106 nodev, /* cb_open */
107 nodev, /* cb_close */
108 nodev, /* cb_strategy */
109 nodev, /* cb_print */
110 nodev, /* cb_dump */
111 nodev, /* cb_read */
112 nodev, /* cb_write */
113 nodev, /* cb_ioctl */
114 nodev, /* cb_devmap */
115 nodev, /* cb_mmap */
116 nodev, /* cb_segmap */
117 nochpoll, /* cb_chpoll */
118 ddi_prop_op, /* cb_prop_op */
119 &usbser_pl2303_str_info, /* cb_stream */
120 (int)(D_64BIT | D_NEW | D_MP | D_HOTPLUG) /* cb_flag */
121 };
122
123
124 /*
125 * auto configuration ops
126 */
127 struct dev_ops usbser_pl2303_ops = {
128 DEVO_REV, /* devo_rev */
129 0, /* devo_refcnt */
130 usbser_pl2303_getinfo, /* devo_getinfo */
131 nulldev, /* devo_identify */
132 nulldev, /* devo_probe */
133 usbser_pl2303_attach, /* devo_attach */
134 usbser_pl2303_detach, /* devo_detach */
135 nodev, /* devo_reset */
136 &usbser_pl2303_cb_ops, /* devo_cb_ops */
137 (struct bus_ops *)NULL, /* devo_bus_ops */
138 usbser_power, /* devo_power */
139 ddi_quiesce_not_needed, /* devo_quiesce */
140 };
141
142
143 extern struct mod_ops mod_driverops;
144
145
146 static struct modldrv modldrv = {
147 &mod_driverops, /* type of module - driver */
148 "USB Prolific PL2303 driver",
149 &usbser_pl2303_ops,
150 };
151
152
153 static struct modlinkage modlinkage = {
154 MODREV_1, &modldrv, 0
155 };
156
157
158 /*
159 * entry points
160 * ------------
161 *
162 */
163 int
164 _init(void)
165 {
166 int error;
167
168 if ((error = mod_install(&modlinkage)) == 0) {
169 error = ddi_soft_state_init(&usbser_pl2303_statep,
170 usbser_soft_state_size(), 1);
171 }
172
173 return (error);
174 }
175
176
177 int
178 _fini(void)
179 {
180 int error;
181
182 if ((error = mod_remove(&modlinkage)) == 0) {
183 ddi_soft_state_fini(&usbser_pl2303_statep);
184 }
185
186 return (error);
187 }
188
189
190 int
191 _info(struct modinfo *modinfop)
192 {
193 return (mod_info(&modlinkage, modinfop));
194 }
195
196
197 int
198 usbser_pl2303_getinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg,
199 void **result)
200 {
201 return (usbser_getinfo(dip, infocmd, arg, result,
202 usbser_pl2303_statep));
203 }
204
205
206 static int
207 usbser_pl2303_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
208 {
209 return (usbser_attach(dip, cmd, usbser_pl2303_statep, &pl2303_ds_ops));
210 }
211
212
213 static int
214 usbser_pl2303_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
215 {
216 return (usbser_detach(dip, cmd, usbser_pl2303_statep));
217 }
218
219
220 static int
221 usbser_pl2303_open(queue_t *rq, dev_t *dev, int flag, int sflag, cred_t *cr)
222 {
223 return (usbser_open(rq, dev, flag, sflag, cr, usbser_pl2303_statep));
224 }