7127  remove -Wno-missing-braces from Makefile.uts

*** 261,271 ****
  
  /* Note: these may go away in the future... */
  static uint32_t sd_xbuf_active_limit    = 512;
  static uint32_t sd_xbuf_reserve_limit   = 16;
  
! static struct sd_resv_reclaim_request   sd_tr = { NULL, NULL, NULL, 0, 0, 0 };
  
  /*
   * Timer value used to reset the throttle after it has been reduced
   * (typically in response to TRAN_BUSY or STATUS_QFULL)
   */
--- 261,271 ----
  
  /* Note: these may go away in the future... */
  static uint32_t sd_xbuf_active_limit    = 512;
  static uint32_t sd_xbuf_reserve_limit   = 16;
  
! static struct sd_resv_reclaim_request   sd_tr = { NULL, NULL, NULL, {0} };
  
  /*
   * Timer value used to reset the throttle after it has been reduced
   * (typically in response to TRAN_BUSY or STATUS_QFULL)
   */
*** 832,842 ****
   */
  #define VPD_HEAD_OFFSET         3       /* size of head for vpd page */
  #define VPD_PAGE_LENGTH         3       /* offset for pge length data */
  #define VPD_MODE_PAGE           1       /* offset into vpd pg for "page code" */
  
! static kmutex_t sd_sense_mutex = {0};
  
  /*
   * Macros for updates of the driver state
   */
  #define New_state(un, s)        \
--- 832,842 ----
   */
  #define VPD_HEAD_OFFSET         3       /* size of head for vpd page */
  #define VPD_PAGE_LENGTH         3       /* offset for pge length data */
  #define VPD_MODE_PAGE           1       /* offset into vpd pg for "page code" */
  
! static kmutex_t sd_sense_mutex = {{NULL}};
  
  /*
   * Macros for updates of the driver state
   */
  #define New_state(un, s)        \
*** 1769,1789 ****
          SD_MODULE_NAME,         /* Module name. */
          &sd_ops                 /* driver ops */
  };
  
  static struct modlinkage modlinkage = {
!         MODREV_1, &modldrv, NULL
  };
  
  #else /* XPV_HVM_DRIVER */
  static struct modlmisc modlmisc = {
          &mod_miscops,           /* Type of module. This one is a misc */
          "HVM " SD_MODULE_NAME,          /* Module name. */
  };
  
  static struct modlinkage modlinkage = {
!         MODREV_1, &modlmisc, NULL
  };
  
  #endif /* XPV_HVM_DRIVER */
  
  static cmlb_tg_ops_t sd_tgops = {
--- 1769,1789 ----
          SD_MODULE_NAME,         /* Module name. */
          &sd_ops                 /* driver ops */
  };
  
  static struct modlinkage modlinkage = {
!         MODREV_1, { &modldrv, NULL }
  };
  
  #else /* XPV_HVM_DRIVER */
  static struct modlmisc modlmisc = {
          &mod_miscops,           /* Type of module. This one is a misc */
          "HVM " SD_MODULE_NAME,          /* Module name. */
  };
  
  static struct modlinkage modlinkage = {
!         MODREV_1, { &modlmisc, NULL }
  };
  
  #endif /* XPV_HVM_DRIVER */
  
  static cmlb_tg_ops_t sd_tgops = {
*** 1791,1813 ****
          sd_tg_rdwr,
          sd_tg_getinfo
  };
  
  static struct scsi_asq_key_strings sd_additional_codes[] = {
!         0x81, 0, "Logical Unit is Reserved",
!         0x85, 0, "Audio Address Not Valid",
!         0xb6, 0, "Media Load Mechanism Failed",
!         0xB9, 0, "Audio Play Operation Aborted",
!         0xbf, 0, "Buffer Overflow for Read All Subcodes Command",
!         0x53, 2, "Medium removal prevented",
!         0x6f, 0, "Authentication failed during key exchange",
!         0x6f, 1, "Key not present",
!         0x6f, 2, "Key not established",
!         0x6f, 3, "Read without proper authentication",
!         0x6f, 4, "Mismatched region to this logical unit",
!         0x6f, 5, "Region reset count error",
!         0xffff, 0x0, NULL
  };
  
  
  /*
   * Struct for passing printing information for sense data messages
--- 1791,1813 ----
          sd_tg_rdwr,
          sd_tg_getinfo
  };
  
  static struct scsi_asq_key_strings sd_additional_codes[] = {
!         { 0x81, 0, "Logical Unit is Reserved" },
!         { 0x85, 0, "Audio Address Not Valid" },
!         { 0xb6, 0, "Media Load Mechanism Failed" },
!         { 0xB9, 0, "Audio Play Operation Aborted" },
!         { 0xbf, 0, "Buffer Overflow for Read All Subcodes Command" },
!         { 0x53, 2, "Medium removal prevented" },
!         { 0x6f, 0, "Authentication failed during key exchange" },
!         { 0x6f, 1, "Key not present" },
!         { 0x6f, 2, "Key not established" },
!         { 0x6f, 3, "Read without proper authentication" },
!         { 0x6f, 4, "Mismatched region to this logical unit" },
!         { 0x6f, 5, "Region reset count error" },
!         { 0xffff, 0x0, NULL }
  };
  
  
  /*
   * Struct for passing printing information for sense data messages