1 /*******************************************************************************
2 *
3 * Module Name: rsmisc - Miscellaneous resource descriptors
4 *
5 ******************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2014, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #define __RSMISC_C__
45
46 #include "acpi.h"
47 #include "accommon.h"
48 #include "acresrc.h"
49
50 #define _COMPONENT ACPI_RESOURCES
51 ACPI_MODULE_NAME ("rsmisc")
52
53
54 #define INIT_RESOURCE_TYPE(i) i->ResourceOffset
55 #define INIT_RESOURCE_LENGTH(i) i->AmlOffset
56 #define INIT_TABLE_LENGTH(i) i->Value
57
58 #define COMPARE_OPCODE(i) i->ResourceOffset
59 #define COMPARE_TARGET(i) i->AmlOffset
60 #define COMPARE_VALUE(i) i->Value
61
62
63 /*******************************************************************************
64 *
65 * FUNCTION: AcpiRsConvertAmlToResource
66 *
67 * PARAMETERS: Resource - Pointer to the resource descriptor
68 * Aml - Where the AML descriptor is returned
69 * Info - Pointer to appropriate conversion table
70 *
71 * RETURN: Status
72 *
73 * DESCRIPTION: Convert an external AML resource descriptor to the corresponding
74 * internal resource descriptor
75 *
76 ******************************************************************************/
77
78 ACPI_STATUS
79 AcpiRsConvertAmlToResource (
80 ACPI_RESOURCE *Resource,
81 AML_RESOURCE *Aml,
82 ACPI_RSCONVERT_INFO *Info)
83 {
84 ACPI_RS_LENGTH AmlResourceLength;
85 void *Source;
86 void *Destination;
87 char *Target;
88 UINT8 Count;
89 UINT8 FlagsMode = FALSE;
90 UINT16 ItemCount = 0;
91 UINT16 Temp16 = 0;
92
93
94 ACPI_FUNCTION_TRACE (RsConvertAmlToResource);
95
96
97 if (!Info)
98 {
99 return_ACPI_STATUS (AE_BAD_PARAMETER);
100 }
101
102 if (((ACPI_SIZE) Resource) & 0x3)
103 {
104 /* Each internal resource struct is expected to be 32-bit aligned */
105
106 ACPI_WARNING ((AE_INFO,
107 "Misaligned resource pointer (get): %p Type 0x%2.2X Length %u",
108 Resource, Resource->Type, Resource->Length));
109 }
110
111 /* Extract the resource Length field (does not include header length) */
112
113 AmlResourceLength = AcpiUtGetResourceLength (Aml);
114
115 /*
116 * First table entry must be ACPI_RSC_INITxxx and must contain the
117 * table length (# of table entries)
118 */
119 Count = INIT_TABLE_LENGTH (Info);
120 while (Count)
121 {
122 /*
123 * Source is the external AML byte stream buffer,
124 * destination is the internal resource descriptor
125 */
126 Source = ACPI_ADD_PTR (void, Aml, Info->AmlOffset);
127 Destination = ACPI_ADD_PTR (void, Resource, Info->ResourceOffset);
128
129 switch (Info->Opcode)
130 {
131 case ACPI_RSC_INITGET:
132 /*
133 * Get the resource type and the initial (minimum) length
134 */
135 ACPI_MEMSET (Resource, 0, INIT_RESOURCE_LENGTH (Info));
136 Resource->Type = INIT_RESOURCE_TYPE (Info);
137 Resource->Length = INIT_RESOURCE_LENGTH (Info);
138 break;
139
140 case ACPI_RSC_INITSET:
141 break;
142
143 case ACPI_RSC_FLAGINIT:
144
145 FlagsMode = TRUE;
146 break;
147
148 case ACPI_RSC_1BITFLAG:
149 /*
150 * Mask and shift the flag bit
151 */
152 ACPI_SET8 (Destination,
153 ((ACPI_GET8 (Source) >> Info->Value) & 0x01));
154 break;
155
156 case ACPI_RSC_2BITFLAG:
157 /*
158 * Mask and shift the flag bits
159 */
160 ACPI_SET8 (Destination,
161 ((ACPI_GET8 (Source) >> Info->Value) & 0x03));
162 break;
163
164 case ACPI_RSC_3BITFLAG:
165 /*
166 * Mask and shift the flag bits
167 */
168 ACPI_SET8 (Destination,
169 ((ACPI_GET8 (Source) >> Info->Value) & 0x07));
170 break;
171
172 case ACPI_RSC_COUNT:
173
174 ItemCount = ACPI_GET8 (Source);
175 ACPI_SET8 (Destination, ItemCount);
176
177 Resource->Length = Resource->Length +
178 (Info->Value * (ItemCount - 1));
179 break;
180
181 case ACPI_RSC_COUNT16:
182
183 ItemCount = AmlResourceLength;
184 ACPI_SET16 (Destination, ItemCount);
185
186 Resource->Length = Resource->Length +
187 (Info->Value * (ItemCount - 1));
188 break;
189
190 case ACPI_RSC_COUNT_GPIO_PIN:
191
192 Target = ACPI_ADD_PTR (void, Aml, Info->Value);
193 ItemCount = ACPI_GET16 (Target) - ACPI_GET16 (Source);
194
195 Resource->Length = Resource->Length + ItemCount;
196 ItemCount = ItemCount / 2;
197 ACPI_SET16 (Destination, ItemCount);
198 break;
199
200 case ACPI_RSC_COUNT_GPIO_VEN:
201
202 ItemCount = ACPI_GET8 (Source);
203 ACPI_SET8 (Destination, ItemCount);
204
205 Resource->Length = Resource->Length +
206 (Info->Value * ItemCount);
207 break;
208
209 case ACPI_RSC_COUNT_GPIO_RES:
210 /*
211 * Vendor data is optional (length/offset may both be zero)
212 * Examine vendor data length field first
213 */
214 Target = ACPI_ADD_PTR (void, Aml, (Info->Value + 2));
215 if (ACPI_GET16 (Target))
216 {
217 /* Use vendor offset to get resource source length */
218
219 Target = ACPI_ADD_PTR (void, Aml, Info->Value);
220 ItemCount = ACPI_GET16 (Target) - ACPI_GET16 (Source);
221 }
222 else
223 {
224 /* No vendor data to worry about */
225
226 ItemCount = Aml->LargeHeader.ResourceLength +
227 sizeof (AML_RESOURCE_LARGE_HEADER) -
228 ACPI_GET16 (Source);
229 }
230
231 Resource->Length = Resource->Length + ItemCount;
232 ACPI_SET16 (Destination, ItemCount);
233 break;
234
235 case ACPI_RSC_COUNT_SERIAL_VEN:
236
237 ItemCount = ACPI_GET16 (Source) - Info->Value;
238
239 Resource->Length = Resource->Length + ItemCount;
240 ACPI_SET16 (Destination, ItemCount);
241 break;
242
243 case ACPI_RSC_COUNT_SERIAL_RES:
244
245 ItemCount = (AmlResourceLength +
246 sizeof (AML_RESOURCE_LARGE_HEADER)) -
247 ACPI_GET16 (Source) - Info->Value;
248
249 Resource->Length = Resource->Length + ItemCount;
250 ACPI_SET16 (Destination, ItemCount);
251 break;
252
253 case ACPI_RSC_LENGTH:
254
255 Resource->Length = Resource->Length + Info->Value;
256 break;
257
258 case ACPI_RSC_MOVE8:
259 case ACPI_RSC_MOVE16:
260 case ACPI_RSC_MOVE32:
261 case ACPI_RSC_MOVE64:
262 /*
263 * Raw data move. Use the Info value field unless ItemCount has
264 * been previously initialized via a COUNT opcode
265 */
266 if (Info->Value)
267 {
268 ItemCount = Info->Value;
269 }
270 AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode);
271 break;
272
273 case ACPI_RSC_MOVE_GPIO_PIN:
274
275 /* Generate and set the PIN data pointer */
276
277 Target = (char *) ACPI_ADD_PTR (void, Resource,
278 (Resource->Length - ItemCount * 2));
279 *(UINT16 **) Destination = ACPI_CAST_PTR (UINT16, Target);
280
281 /* Copy the PIN data */
282
283 Source = ACPI_ADD_PTR (void, Aml, ACPI_GET16 (Source));
284 AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode);
285 break;
286
287 case ACPI_RSC_MOVE_GPIO_RES:
288
289 /* Generate and set the ResourceSource string pointer */
290
291 Target = (char *) ACPI_ADD_PTR (void, Resource,
292 (Resource->Length - ItemCount));
293 *(UINT8 **) Destination = ACPI_CAST_PTR (UINT8, Target);
294
295 /* Copy the ResourceSource string */
296
297 Source = ACPI_ADD_PTR (void, Aml, ACPI_GET16 (Source));
298 AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode);
299 break;
300
301 case ACPI_RSC_MOVE_SERIAL_VEN:
302
303 /* Generate and set the Vendor Data pointer */
304
305 Target = (char *) ACPI_ADD_PTR (void, Resource,
306 (Resource->Length - ItemCount));
307 *(UINT8 **) Destination = ACPI_CAST_PTR (UINT8, Target);
308
309 /* Copy the Vendor Data */
310
311 Source = ACPI_ADD_PTR (void, Aml, Info->Value);
312 AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode);
313 break;
314
315 case ACPI_RSC_MOVE_SERIAL_RES:
316
317 /* Generate and set the ResourceSource string pointer */
318
319 Target = (char *) ACPI_ADD_PTR (void, Resource,
320 (Resource->Length - ItemCount));
321 *(UINT8 **) Destination = ACPI_CAST_PTR (UINT8, Target);
322
323 /* Copy the ResourceSource string */
324
325 Source = ACPI_ADD_PTR (void, Aml, (ACPI_GET16 (Source) + Info->Value));
326 AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode);
327 break;
328
329 case ACPI_RSC_SET8:
330
331 ACPI_MEMSET (Destination, Info->AmlOffset, Info->Value);
332 break;
333
334 case ACPI_RSC_DATA8:
335
336 Target = ACPI_ADD_PTR (char, Resource, Info->Value);
337 ACPI_MEMCPY (Destination, Source, ACPI_GET16 (Target));
338 break;
339
340 case ACPI_RSC_ADDRESS:
341 /*
342 * Common handler for address descriptor flags
343 */
344 if (!AcpiRsGetAddressCommon (Resource, Aml))
345 {
346 return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE);
347 }
348 break;
349
350 case ACPI_RSC_SOURCE:
351 /*
352 * Optional ResourceSource (Index and String)
353 */
354 Resource->Length +=
355 AcpiRsGetResourceSource (AmlResourceLength, Info->Value,
356 Destination, Aml, NULL);
357 break;
358
359 case ACPI_RSC_SOURCEX:
360 /*
361 * Optional ResourceSource (Index and String). This is the more
362 * complicated case used by the Interrupt() macro
363 */
364 Target = ACPI_ADD_PTR (char, Resource,
365 Info->AmlOffset + (ItemCount * 4));
366
367 Resource->Length +=
368 AcpiRsGetResourceSource (AmlResourceLength, (ACPI_RS_LENGTH)
369 (((ItemCount - 1) * sizeof (UINT32)) + Info->Value),
370 Destination, Aml, Target);
371 break;
372
373 case ACPI_RSC_BITMASK:
374 /*
375 * 8-bit encoded bitmask (DMA macro)
376 */
377 ItemCount = AcpiRsDecodeBitmask (ACPI_GET8 (Source), Destination);
378 if (ItemCount)
379 {
380 Resource->Length += (ItemCount - 1);
381 }
382
383 Target = ACPI_ADD_PTR (char, Resource, Info->Value);
384 ACPI_SET8 (Target, ItemCount);
385 break;
386
387 case ACPI_RSC_BITMASK16:
388 /*
389 * 16-bit encoded bitmask (IRQ macro)
390 */
391 ACPI_MOVE_16_TO_16 (&Temp16, Source);
392
393 ItemCount = AcpiRsDecodeBitmask (Temp16, Destination);
394 if (ItemCount)
395 {
396 Resource->Length += (ItemCount - 1);
397 }
398
399 Target = ACPI_ADD_PTR (char, Resource, Info->Value);
400 ACPI_SET8 (Target, ItemCount);
401 break;
402
403 case ACPI_RSC_EXIT_NE:
404 /*
405 * Control - Exit conversion if not equal
406 */
407 switch (Info->ResourceOffset)
408 {
409 case ACPI_RSC_COMPARE_AML_LENGTH:
410
411 if (AmlResourceLength != Info->Value)
412 {
413 goto Exit;
414 }
415 break;
416
417 case ACPI_RSC_COMPARE_VALUE:
418
419 if (ACPI_GET8 (Source) != Info->Value)
420 {
421 goto Exit;
422 }
423 break;
424
425 default:
426
427 ACPI_ERROR ((AE_INFO, "Invalid conversion sub-opcode"));
428 return_ACPI_STATUS (AE_BAD_PARAMETER);
429 }
430 break;
431
432 default:
433
434 ACPI_ERROR ((AE_INFO, "Invalid conversion opcode"));
435 return_ACPI_STATUS (AE_BAD_PARAMETER);
436 }
437
438 Count--;
439 Info++;
440 }
441
442 Exit:
443 if (!FlagsMode)
444 {
445 /* Round the resource struct length up to the next boundary (32 or 64) */
446
447 Resource->Length = (UINT32) ACPI_ROUND_UP_TO_NATIVE_WORD (Resource->Length);
448 }
449 return_ACPI_STATUS (AE_OK);
450 }
451
452
453 /*******************************************************************************
454 *
455 * FUNCTION: AcpiRsConvertResourceToAml
456 *
457 * PARAMETERS: Resource - Pointer to the resource descriptor
458 * Aml - Where the AML descriptor is returned
459 * Info - Pointer to appropriate conversion table
460 *
461 * RETURN: Status
462 *
463 * DESCRIPTION: Convert an internal resource descriptor to the corresponding
464 * external AML resource descriptor.
465 *
466 ******************************************************************************/
467
468 ACPI_STATUS
469 AcpiRsConvertResourceToAml (
470 ACPI_RESOURCE *Resource,
471 AML_RESOURCE *Aml,
472 ACPI_RSCONVERT_INFO *Info)
473 {
474 void *Source = NULL;
475 void *Destination;
476 char *Target;
477 ACPI_RSDESC_SIZE AmlLength = 0;
478 UINT8 Count;
479 UINT16 Temp16 = 0;
480 UINT16 ItemCount = 0;
481
482
483 ACPI_FUNCTION_TRACE (RsConvertResourceToAml);
484
485
486 if (!Info)
487 {
488 return_ACPI_STATUS (AE_BAD_PARAMETER);
489 }
490
491 /*
492 * First table entry must be ACPI_RSC_INITxxx and must contain the
493 * table length (# of table entries)
494 */
495 Count = INIT_TABLE_LENGTH (Info);
496
497 while (Count)
498 {
499 /*
500 * Source is the internal resource descriptor,
501 * destination is the external AML byte stream buffer
502 */
503 Source = ACPI_ADD_PTR (void, Resource, Info->ResourceOffset);
504 Destination = ACPI_ADD_PTR (void, Aml, Info->AmlOffset);
505
506 switch (Info->Opcode)
507 {
508 case ACPI_RSC_INITSET:
509
510 ACPI_MEMSET (Aml, 0, INIT_RESOURCE_LENGTH (Info));
511 AmlLength = INIT_RESOURCE_LENGTH (Info);
512 AcpiRsSetResourceHeader (INIT_RESOURCE_TYPE (Info), AmlLength, Aml);
513 break;
514
515 case ACPI_RSC_INITGET:
516 break;
517
518 case ACPI_RSC_FLAGINIT:
519 /*
520 * Clear the flag byte
521 */
522 ACPI_SET8 (Destination, 0);
523 break;
524
525 case ACPI_RSC_1BITFLAG:
526 /*
527 * Mask and shift the flag bit
528 */
529 ACPI_SET_BIT (*ACPI_CAST8 (Destination), (UINT8)
530 ((ACPI_GET8 (Source) & 0x01) << Info->Value));
531 break;
532
533 case ACPI_RSC_2BITFLAG:
534 /*
535 * Mask and shift the flag bits
536 */
537 ACPI_SET_BIT (*ACPI_CAST8 (Destination), (UINT8)
538 ((ACPI_GET8 (Source) & 0x03) << Info->Value));
539 break;
540
541 case ACPI_RSC_3BITFLAG:
542 /*
543 * Mask and shift the flag bits
544 */
545 ACPI_SET_BIT (*ACPI_CAST8 (Destination), (UINT8)
546 ((ACPI_GET8 (Source) & 0x07) << Info->Value));
547 break;
548
549 case ACPI_RSC_COUNT:
550
551 ItemCount = ACPI_GET8 (Source);
552 ACPI_SET8 (Destination, ItemCount);
553
554 AmlLength = (UINT16) (AmlLength + (Info->Value * (ItemCount - 1)));
555 break;
556
557 case ACPI_RSC_COUNT16:
558
559 ItemCount = ACPI_GET16 (Source);
560 AmlLength = (UINT16) (AmlLength + ItemCount);
561 AcpiRsSetResourceLength (AmlLength, Aml);
562 break;
563
564 case ACPI_RSC_COUNT_GPIO_PIN:
565
566 ItemCount = ACPI_GET16 (Source);
567 ACPI_SET16 (Destination, AmlLength);
568
569 AmlLength = (UINT16) (AmlLength + ItemCount * 2);
570 Target = ACPI_ADD_PTR (void, Aml, Info->Value);
571 ACPI_SET16 (Target, AmlLength);
572 AcpiRsSetResourceLength (AmlLength, Aml);
573 break;
574
575 case ACPI_RSC_COUNT_GPIO_VEN:
576
577 ItemCount = ACPI_GET16 (Source);
578 ACPI_SET16 (Destination, ItemCount);
579
580 AmlLength = (UINT16) (AmlLength + (Info->Value * ItemCount));
581 AcpiRsSetResourceLength (AmlLength, Aml);
582 break;
583
584 case ACPI_RSC_COUNT_GPIO_RES:
585
586 /* Set resource source string length */
587
588 ItemCount = ACPI_GET16 (Source);
589 ACPI_SET16 (Destination, AmlLength);
590
591 /* Compute offset for the Vendor Data */
592
593 AmlLength = (UINT16) (AmlLength + ItemCount);
594 Target = ACPI_ADD_PTR (void, Aml, Info->Value);
595
596 /* Set vendor offset only if there is vendor data */
597
598 if (Resource->Data.Gpio.VendorLength)
599 {
600 ACPI_SET16 (Target, AmlLength);
601 }
602
603 AcpiRsSetResourceLength (AmlLength, Aml);
604 break;
605
606 case ACPI_RSC_COUNT_SERIAL_VEN:
607
608 ItemCount = ACPI_GET16 (Source);
609 ACPI_SET16 (Destination, ItemCount + Info->Value);
610 AmlLength = (UINT16) (AmlLength + ItemCount);
611 AcpiRsSetResourceLength (AmlLength, Aml);
612 break;
613
614 case ACPI_RSC_COUNT_SERIAL_RES:
615
616 ItemCount = ACPI_GET16 (Source);
617 AmlLength = (UINT16) (AmlLength + ItemCount);
618 AcpiRsSetResourceLength (AmlLength, Aml);
619 break;
620
621 case ACPI_RSC_LENGTH:
622
623 AcpiRsSetResourceLength (Info->Value, Aml);
624 break;
625
626 case ACPI_RSC_MOVE8:
627 case ACPI_RSC_MOVE16:
628 case ACPI_RSC_MOVE32:
629 case ACPI_RSC_MOVE64:
630
631 if (Info->Value)
632 {
633 ItemCount = Info->Value;
634 }
635 AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode);
636 break;
637
638 case ACPI_RSC_MOVE_GPIO_PIN:
639
640 Destination = (char *) ACPI_ADD_PTR (void, Aml,
641 ACPI_GET16 (Destination));
642 Source = * (UINT16 **) Source;
643 AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode);
644 break;
645
646 case ACPI_RSC_MOVE_GPIO_RES:
647
648 /* Used for both ResourceSource string and VendorData */
649
650 Destination = (char *) ACPI_ADD_PTR (void, Aml,
651 ACPI_GET16 (Destination));
652 Source = * (UINT8 **) Source;
653 AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode);
654 break;
655
656 case ACPI_RSC_MOVE_SERIAL_VEN:
657
658 Destination = (char *) ACPI_ADD_PTR (void, Aml,
659 (AmlLength - ItemCount));
660 Source = * (UINT8 **) Source;
661 AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode);
662 break;
663
664 case ACPI_RSC_MOVE_SERIAL_RES:
665
666 Destination = (char *) ACPI_ADD_PTR (void, Aml,
667 (AmlLength - ItemCount));
668 Source = * (UINT8 **) Source;
669 AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode);
670 break;
671
672 case ACPI_RSC_ADDRESS:
673
674 /* Set the Resource Type, General Flags, and Type-Specific Flags */
675
676 AcpiRsSetAddressCommon (Aml, Resource);
677 break;
678
679 case ACPI_RSC_SOURCEX:
680 /*
681 * Optional ResourceSource (Index and String)
682 */
683 AmlLength = AcpiRsSetResourceSource (
684 Aml, (ACPI_RS_LENGTH) AmlLength, Source);
685 AcpiRsSetResourceLength (AmlLength, Aml);
686 break;
687
688 case ACPI_RSC_SOURCE:
689 /*
690 * Optional ResourceSource (Index and String). This is the more
691 * complicated case used by the Interrupt() macro
692 */
693 AmlLength = AcpiRsSetResourceSource (Aml, Info->Value, Source);
694 AcpiRsSetResourceLength (AmlLength, Aml);
695 break;
696
697 case ACPI_RSC_BITMASK:
698 /*
699 * 8-bit encoded bitmask (DMA macro)
700 */
701 ACPI_SET8 (Destination,
702 AcpiRsEncodeBitmask (Source,
703 *ACPI_ADD_PTR (UINT8, Resource, Info->Value)));
704 break;
705
706 case ACPI_RSC_BITMASK16:
707 /*
708 * 16-bit encoded bitmask (IRQ macro)
709 */
710 Temp16 = AcpiRsEncodeBitmask (Source,
711 *ACPI_ADD_PTR (UINT8, Resource, Info->Value));
712 ACPI_MOVE_16_TO_16 (Destination, &Temp16);
713 break;
714
715 case ACPI_RSC_EXIT_LE:
716 /*
717 * Control - Exit conversion if less than or equal
718 */
719 if (ItemCount <= Info->Value)
720 {
721 goto Exit;
722 }
723 break;
724
725 case ACPI_RSC_EXIT_NE:
726 /*
727 * Control - Exit conversion if not equal
728 */
729 switch (COMPARE_OPCODE (Info))
730 {
731 case ACPI_RSC_COMPARE_VALUE:
732
733 if (*ACPI_ADD_PTR (UINT8, Resource,
734 COMPARE_TARGET (Info)) != COMPARE_VALUE (Info))
735 {
736 goto Exit;
737 }
738 break;
739
740 default:
741
742 ACPI_ERROR ((AE_INFO, "Invalid conversion sub-opcode"));
743 return_ACPI_STATUS (AE_BAD_PARAMETER);
744 }
745 break;
746
747 case ACPI_RSC_EXIT_EQ:
748 /*
749 * Control - Exit conversion if equal
750 */
751 if (*ACPI_ADD_PTR (UINT8, Resource,
752 COMPARE_TARGET (Info)) == COMPARE_VALUE (Info))
753 {
754 goto Exit;
755 }
756 break;
757
758 default:
759
760 ACPI_ERROR ((AE_INFO, "Invalid conversion opcode"));
761 return_ACPI_STATUS (AE_BAD_PARAMETER);
762 }
763
764 Count--;
765 Info++;
766 }
767
768 Exit:
769 return_ACPI_STATUS (AE_OK);
770 }
771
772
773 #if 0
774 /* Previous resource validations */
775
776 if (Aml->ExtAddress64.RevisionID != AML_RESOURCE_EXTENDED_ADDRESS_REVISION)
777 {
778 return_ACPI_STATUS (AE_SUPPORT);
779 }
780
781 if (Resource->Data.StartDpf.PerformanceRobustness >= 3)
782 {
783 return_ACPI_STATUS (AE_AML_BAD_RESOURCE_VALUE);
784 }
785
786 if (((Aml->Irq.Flags & 0x09) == 0x00) ||
787 ((Aml->Irq.Flags & 0x09) == 0x09))
788 {
789 /*
790 * Only [ActiveHigh, EdgeSensitive] or [ActiveLow, LevelSensitive]
791 * polarity/trigger interrupts are allowed (ACPI spec, section
792 * "IRQ Format"), so 0x00 and 0x09 are illegal.
793 */
794 ACPI_ERROR ((AE_INFO,
795 "Invalid interrupt polarity/trigger in resource list, 0x%X",
796 Aml->Irq.Flags));
797 return_ACPI_STATUS (AE_BAD_DATA);
798 }
799
800 Resource->Data.ExtendedIrq.InterruptCount = Temp8;
801 if (Temp8 < 1)
802 {
803 /* Must have at least one IRQ */
804
805 return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH);
806 }
807
808 if (Resource->Data.Dma.Transfer == 0x03)
809 {
810 ACPI_ERROR ((AE_INFO,
811 "Invalid DMA.Transfer preference (3)"));
812 return_ACPI_STATUS (AE_BAD_DATA);
813 }
814 #endif