1 /******************************************************************************
   2  *
   3  * Module Name: asutils - common utilities
   4  *
   5  *****************************************************************************/
   6 
   7 /*
   8  * Copyright (C) 2000 - 2013, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43 
  44 #include "acpisrc.h"
  45 
  46 
  47 /*******************************************************************************
  48  *
  49  * FUNCTION:    AsStrlwr (strlwr)
  50  *
  51  * PARAMETERS:  SrcString       - The source string to convert
  52  *
  53  * RETURN:      None
  54  *
  55  * DESCRIPTION: Convert string to lowercase
  56  *
  57  * NOTE: This is not a POSIX function, so it appears here so that we don't have
  58  * header file issues with the various hosts/compilers/clibs.
  59  *
  60  ******************************************************************************/
  61 
  62 void
  63 AsStrlwr (
  64     char                    *SrcString)
  65 {
  66     char                    *String;
  67 
  68 
  69     /* Walk entire string, lowercasing the letters */
  70 
  71     if (SrcString)
  72     {
  73         for (String = SrcString; *String; String++)
  74         {
  75             *String = (char) ACPI_TOLOWER (*String);
  76         }
  77     }
  78 }
  79 
  80 
  81 /******************************************************************************
  82  *
  83  * FUNCTION:    AsSkipUntilChar
  84  *
  85  * DESCRIPTION: Find the next instance of the input character
  86  *
  87  ******************************************************************************/
  88 
  89 char *
  90 AsSkipUntilChar (
  91     char                    *Buffer,
  92     char                    Target)
  93 {
  94 
  95     while (*Buffer != Target)
  96     {
  97         if (!*Buffer)
  98         {
  99             return (NULL);
 100         }
 101 
 102         Buffer++;
 103     }
 104 
 105     return (Buffer);
 106 }
 107 
 108 
 109 /******************************************************************************
 110  *
 111  * FUNCTION:    AsSkipPastChar
 112  *
 113  * DESCRIPTION: Find the next instance of the input character, return a buffer
 114  *              pointer to this character+1.
 115  *
 116  ******************************************************************************/
 117 
 118 char *
 119 AsSkipPastChar (
 120     char                    *Buffer,
 121     char                    Target)
 122 {
 123 
 124     while (*Buffer != Target)
 125     {
 126         if (!*Buffer)
 127         {
 128             return (NULL);
 129         }
 130 
 131         Buffer++;
 132     }
 133 
 134     Buffer++;
 135 
 136     return (Buffer);
 137 }
 138 
 139 
 140 /******************************************************************************
 141  *
 142  * FUNCTION:    AsReplaceData
 143  *
 144  * DESCRIPTION: This function inserts and removes data from the file buffer.
 145  *              if more data is inserted than is removed, the data in the buffer
 146  *              is moved to make room. If less data is inserted than is removed,
 147  *              the remaining data is moved to close the hole.
 148  *
 149  ******************************************************************************/
 150 
 151 char *
 152 AsReplaceData (
 153     char                    *Buffer,
 154     UINT32                  LengthToRemove,
 155     char                    *BufferToAdd,
 156     UINT32                  LengthToAdd)
 157 {
 158     UINT32                  BufferLength;
 159 
 160 
 161     /*
 162      * Buffer is a string, so the length must include the terminating zero
 163      */
 164     BufferLength = strlen (Buffer) + 1;
 165 
 166     if (LengthToRemove != LengthToAdd)
 167     {
 168         /*
 169          * Move some of the existing data
 170          * 1) If adding more bytes than removing, make room for the new data
 171          * 2) if removing more bytes than adding, delete the extra space
 172          */
 173         if (LengthToRemove > 0)
 174         {
 175             Gbl_MadeChanges = TRUE;
 176             memmove ((Buffer + LengthToAdd), (Buffer + LengthToRemove), (BufferLength - LengthToRemove));
 177         }
 178     }
 179 
 180     /*
 181      * Now we can move in the new data
 182      */
 183     if (LengthToAdd > 0)
 184     {
 185         Gbl_MadeChanges = TRUE;
 186         memmove (Buffer, BufferToAdd, LengthToAdd);
 187     }
 188 
 189     return (Buffer + LengthToAdd);
 190 }
 191 
 192 
 193 /******************************************************************************
 194  *
 195  * FUNCTION:    AsInsertData
 196  *
 197  * DESCRIPTION: This function inserts and removes data from the file buffer.
 198  *              if more data is inserted than is removed, the data in the buffer
 199  *              is moved to make room. If less data is inserted than is removed,
 200  *              the remaining data is moved to close the hole.
 201  *
 202  ******************************************************************************/
 203 
 204 char *
 205 AsInsertData (
 206     char                    *Buffer,
 207     char                    *BufferToAdd,
 208     UINT32                  LengthToAdd)
 209 {
 210     UINT32                  BufferLength;
 211 
 212 
 213     if (LengthToAdd > 0)
 214     {
 215         /*
 216          * Buffer is a string, so the length must include the terminating zero
 217          */
 218         BufferLength = strlen (Buffer) + 1;
 219 
 220         /*
 221          * Move some of the existing data
 222          * 1) If adding more bytes than removing, make room for the new data
 223          * 2) if removing more bytes than adding, delete the extra space
 224          */
 225         Gbl_MadeChanges = TRUE;
 226         memmove ((Buffer + LengthToAdd), Buffer, BufferLength);
 227 
 228         /*
 229          * Now we can move in the new data
 230          */
 231         memmove (Buffer, BufferToAdd, LengthToAdd);
 232     }
 233 
 234     return (Buffer + LengthToAdd);
 235 }
 236 
 237 
 238 /******************************************************************************
 239  *
 240  * FUNCTION:    AsRemoveData
 241  *
 242  * DESCRIPTION: This function inserts and removes data from the file buffer.
 243  *              if more data is inserted than is removed, the data in the buffer
 244  *              is moved to make room. If less data is inserted than is removed,
 245  *              the remaining data is moved to close the hole.
 246  *
 247  ******************************************************************************/
 248 
 249 char *
 250 AsRemoveData (
 251     char                    *StartPointer,
 252     char                    *EndPointer)
 253 {
 254     UINT32                  BufferLength;
 255 
 256 
 257     /*
 258      * Buffer is a string, so the length must include the terminating zero
 259      */
 260     BufferLength = strlen (EndPointer) + 1;
 261 
 262     Gbl_MadeChanges = TRUE;
 263     memmove (StartPointer, EndPointer, BufferLength);
 264 
 265     return (StartPointer);
 266 }