1 /******************************************************************************
   2  *
   3  * Module Name: nsinit - namespace initialization
   4  *
   5  *****************************************************************************/
   6 
   7 /*
   8  * Copyright (C) 2000 - 2013, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43 
  44 
  45 #define __NSXFINIT_C__
  46 
  47 #include "acpi.h"
  48 #include "accommon.h"
  49 #include "acnamesp.h"
  50 #include "acdispat.h"
  51 #include "acinterp.h"
  52 
  53 #define _COMPONENT          ACPI_NAMESPACE
  54         ACPI_MODULE_NAME    ("nsinit")
  55 
  56 /* Local prototypes */
  57 
  58 static ACPI_STATUS
  59 AcpiNsInitOneObject (
  60     ACPI_HANDLE             ObjHandle,
  61     UINT32                  Level,
  62     void                    *Context,
  63     void                    **ReturnValue);
  64 
  65 static ACPI_STATUS
  66 AcpiNsInitOneDevice (
  67     ACPI_HANDLE             ObjHandle,
  68     UINT32                  NestingLevel,
  69     void                    *Context,
  70     void                    **ReturnValue);
  71 
  72 static ACPI_STATUS
  73 AcpiNsFindIniMethods (
  74     ACPI_HANDLE             ObjHandle,
  75     UINT32                  NestingLevel,
  76     void                    *Context,
  77     void                    **ReturnValue);
  78 
  79 
  80 /*******************************************************************************
  81  *
  82  * FUNCTION:    AcpiNsInitializeObjects
  83  *
  84  * PARAMETERS:  None
  85  *
  86  * RETURN:      Status
  87  *
  88  * DESCRIPTION: Walk the entire namespace and perform any necessary
  89  *              initialization on the objects found therein
  90  *
  91  ******************************************************************************/
  92 
  93 ACPI_STATUS
  94 AcpiNsInitializeObjects (
  95     void)
  96 {
  97     ACPI_STATUS             Status;
  98     ACPI_INIT_WALK_INFO     Info;
  99 
 100 
 101     ACPI_FUNCTION_TRACE (NsInitializeObjects);
 102 
 103 
 104     ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
 105         "**** Starting initialization of namespace objects ****\n"));
 106     ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT,
 107         "Completing Region/Field/Buffer/Package initialization:\n"));
 108 
 109     /* Set all init info to zero */
 110 
 111     ACPI_MEMSET (&Info, 0, sizeof (ACPI_INIT_WALK_INFO));
 112 
 113     /* Walk entire namespace from the supplied root */
 114 
 115     Status = AcpiWalkNamespace (ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
 116                 ACPI_UINT32_MAX, AcpiNsInitOneObject, NULL,
 117                 &Info, NULL);
 118     if (ACPI_FAILURE (Status))
 119     {
 120         ACPI_EXCEPTION ((AE_INFO, Status, "During WalkNamespace"));
 121     }
 122 
 123     ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT,
 124         "    Initialized %u/%u Regions %u/%u Fields %u/%u "
 125         "Buffers %u/%u Packages (%u nodes)\n",
 126         Info.OpRegionInit,  Info.OpRegionCount,
 127         Info.FieldInit,     Info.FieldCount,
 128         Info.BufferInit,    Info.BufferCount,
 129         Info.PackageInit,   Info.PackageCount, Info.ObjectCount));
 130 
 131     ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
 132         "%u Control Methods found\n", Info.MethodCount));
 133     ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
 134         "%u Op Regions found\n", Info.OpRegionCount));
 135 
 136     return_ACPI_STATUS (AE_OK);
 137 }
 138 
 139 
 140 /*******************************************************************************
 141  *
 142  * FUNCTION:    AcpiNsInitializeDevices
 143  *
 144  * PARAMETERS:  None
 145  *
 146  * RETURN:      ACPI_STATUS
 147  *
 148  * DESCRIPTION: Walk the entire namespace and initialize all ACPI devices.
 149  *              This means running _INI on all present devices.
 150  *
 151  *              Note: We install PCI config space handler on region access,
 152  *              not here.
 153  *
 154  ******************************************************************************/
 155 
 156 ACPI_STATUS
 157 AcpiNsInitializeDevices (
 158     void)
 159 {
 160     ACPI_STATUS             Status;
 161     ACPI_DEVICE_WALK_INFO   Info;
 162 
 163 
 164     ACPI_FUNCTION_TRACE (NsInitializeDevices);
 165 
 166 
 167     /* Init counters */
 168 
 169     Info.DeviceCount = 0;
 170     Info.Num_STA = 0;
 171     Info.Num_INI = 0;
 172 
 173     ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT,
 174         "Initializing Device/Processor/Thermal objects "
 175         "and executing _INI/_STA methods:\n"));
 176 
 177     /* Tree analysis: find all subtrees that contain _INI methods */
 178 
 179     Status = AcpiNsWalkNamespace (ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
 180                 ACPI_UINT32_MAX, FALSE, AcpiNsFindIniMethods, NULL, &Info, NULL);
 181     if (ACPI_FAILURE (Status))
 182     {
 183         goto ErrorExit;
 184     }
 185 
 186     /* Allocate the evaluation information block */
 187 
 188     Info.EvaluateInfo = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_EVALUATE_INFO));
 189     if (!Info.EvaluateInfo)
 190     {
 191         Status = AE_NO_MEMORY;
 192         goto ErrorExit;
 193     }
 194 
 195     /*
 196      * Execute the "global" _INI method that may appear at the root. This
 197      * support is provided for Windows compatibility (Vista+) and is not
 198      * part of the ACPI specification.
 199      */
 200     Info.EvaluateInfo->PrefixNode = AcpiGbl_RootNode;
 201     Info.EvaluateInfo->RelativePathname = METHOD_NAME__INI;
 202     Info.EvaluateInfo->Parameters = NULL;
 203     Info.EvaluateInfo->Flags = ACPI_IGNORE_RETURN_VALUE;
 204 
 205     Status = AcpiNsEvaluate (Info.EvaluateInfo);
 206     if (ACPI_SUCCESS (Status))
 207     {
 208         Info.Num_INI++;
 209     }
 210 
 211     /* Walk namespace to execute all _INIs on present devices */
 212 
 213     Status = AcpiNsWalkNamespace (ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
 214                 ACPI_UINT32_MAX, FALSE, AcpiNsInitOneDevice, NULL, &Info, NULL);
 215 
 216     /*
 217      * Any _OSI requests should be completed by now. If the BIOS has
 218      * requested any Windows OSI strings, we will always truncate
 219      * I/O addresses to 16 bits -- for Windows compatibility.
 220      */
 221     if (AcpiGbl_OsiData >= ACPI_OSI_WIN_2000)
 222     {
 223         AcpiGbl_TruncateIoAddresses = TRUE;
 224     }
 225 
 226     ACPI_FREE (Info.EvaluateInfo);
 227     if (ACPI_FAILURE (Status))
 228     {
 229         goto ErrorExit;
 230     }
 231 
 232     ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT,
 233         "    Executed %u _INI methods requiring %u _STA executions "
 234         "(examined %u objects)\n",
 235         Info.Num_INI, Info.Num_STA, Info.DeviceCount));
 236 
 237     return_ACPI_STATUS (Status);
 238 
 239 
 240 ErrorExit:
 241     ACPI_EXCEPTION ((AE_INFO, Status, "During device initialization"));
 242     return_ACPI_STATUS (Status);
 243 }
 244 
 245 
 246 /*******************************************************************************
 247  *
 248  * FUNCTION:    AcpiNsInitOneObject
 249  *
 250  * PARAMETERS:  ObjHandle       - Node
 251  *              Level           - Current nesting level
 252  *              Context         - Points to a init info struct
 253  *              ReturnValue     - Not used
 254  *
 255  * RETURN:      Status
 256  *
 257  * DESCRIPTION: Callback from AcpiWalkNamespace. Invoked for every object
 258  *              within the  namespace.
 259  *
 260  *              Currently, the only objects that require initialization are:
 261  *              1) Methods
 262  *              2) Op Regions
 263  *
 264  ******************************************************************************/
 265 
 266 static ACPI_STATUS
 267 AcpiNsInitOneObject (
 268     ACPI_HANDLE             ObjHandle,
 269     UINT32                  Level,
 270     void                    *Context,
 271     void                    **ReturnValue)
 272 {
 273     ACPI_OBJECT_TYPE        Type;
 274     ACPI_STATUS             Status = AE_OK;
 275     ACPI_INIT_WALK_INFO     *Info = (ACPI_INIT_WALK_INFO *) Context;
 276     ACPI_NAMESPACE_NODE     *Node = (ACPI_NAMESPACE_NODE *) ObjHandle;
 277     ACPI_OPERAND_OBJECT     *ObjDesc;
 278 
 279 
 280     ACPI_FUNCTION_NAME (NsInitOneObject);
 281 
 282 
 283     Info->ObjectCount++;
 284 
 285     /* And even then, we are only interested in a few object types */
 286 
 287     Type = AcpiNsGetType (ObjHandle);
 288     ObjDesc = AcpiNsGetAttachedObject (Node);
 289     if (!ObjDesc)
 290     {
 291         return (AE_OK);
 292     }
 293 
 294     /* Increment counters for object types we are looking for */
 295 
 296     switch (Type)
 297     {
 298     case ACPI_TYPE_REGION:
 299 
 300         Info->OpRegionCount++;
 301         break;
 302 
 303     case ACPI_TYPE_BUFFER_FIELD:
 304 
 305         Info->FieldCount++;
 306         break;
 307 
 308     case ACPI_TYPE_LOCAL_BANK_FIELD:
 309 
 310         Info->FieldCount++;
 311         break;
 312 
 313     case ACPI_TYPE_BUFFER:
 314 
 315         Info->BufferCount++;
 316         break;
 317 
 318     case ACPI_TYPE_PACKAGE:
 319 
 320         Info->PackageCount++;
 321         break;
 322 
 323     default:
 324 
 325         /* No init required, just exit now */
 326 
 327         return (AE_OK);
 328     }
 329 
 330     /* If the object is already initialized, nothing else to do */
 331 
 332     if (ObjDesc->Common.Flags & AOPOBJ_DATA_VALID)
 333     {
 334         return (AE_OK);
 335     }
 336 
 337     /* Must lock the interpreter before executing AML code */
 338 
 339     AcpiExEnterInterpreter ();
 340 
 341     /*
 342      * Each of these types can contain executable AML code within the
 343      * declaration.
 344      */
 345     switch (Type)
 346     {
 347     case ACPI_TYPE_REGION:
 348 
 349         Info->OpRegionInit++;
 350         Status = AcpiDsGetRegionArguments (ObjDesc);
 351         break;
 352 
 353     case ACPI_TYPE_BUFFER_FIELD:
 354 
 355         Info->FieldInit++;
 356         Status = AcpiDsGetBufferFieldArguments (ObjDesc);
 357         break;
 358 
 359     case ACPI_TYPE_LOCAL_BANK_FIELD:
 360 
 361         Info->FieldInit++;
 362         Status = AcpiDsGetBankFieldArguments (ObjDesc);
 363         break;
 364 
 365     case ACPI_TYPE_BUFFER:
 366 
 367         Info->BufferInit++;
 368         Status = AcpiDsGetBufferArguments (ObjDesc);
 369         break;
 370 
 371     case ACPI_TYPE_PACKAGE:
 372 
 373         Info->PackageInit++;
 374         Status = AcpiDsGetPackageArguments (ObjDesc);
 375         break;
 376 
 377     default:
 378 
 379         /* No other types can get here */
 380 
 381         break;
 382     }
 383 
 384     if (ACPI_FAILURE (Status))
 385     {
 386         ACPI_EXCEPTION ((AE_INFO, Status,
 387             "Could not execute arguments for [%4.4s] (%s)",
 388             AcpiUtGetNodeName (Node), AcpiUtGetTypeName (Type)));
 389     }
 390 
 391     /*
 392      * We ignore errors from above, and always return OK, since we don't want
 393      * to abort the walk on any single error.
 394      */
 395     AcpiExExitInterpreter ();
 396     return (AE_OK);
 397 }
 398 
 399 
 400 /*******************************************************************************
 401  *
 402  * FUNCTION:    AcpiNsFindIniMethods
 403  *
 404  * PARAMETERS:  ACPI_WALK_CALLBACK
 405  *
 406  * RETURN:      ACPI_STATUS
 407  *
 408  * DESCRIPTION: Called during namespace walk. Finds objects named _INI under
 409  *              device/processor/thermal objects, and marks the entire subtree
 410  *              with a SUBTREE_HAS_INI flag. This flag is used during the
 411  *              subsequent device initialization walk to avoid entire subtrees
 412  *              that do not contain an _INI.
 413  *
 414  ******************************************************************************/
 415 
 416 static ACPI_STATUS
 417 AcpiNsFindIniMethods (
 418     ACPI_HANDLE             ObjHandle,
 419     UINT32                  NestingLevel,
 420     void                    *Context,
 421     void                    **ReturnValue)
 422 {
 423     ACPI_DEVICE_WALK_INFO   *Info = ACPI_CAST_PTR (ACPI_DEVICE_WALK_INFO, Context);
 424     ACPI_NAMESPACE_NODE     *Node;
 425     ACPI_NAMESPACE_NODE     *ParentNode;
 426 
 427 
 428     /* Keep count of device/processor/thermal objects */
 429 
 430     Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, ObjHandle);
 431     if ((Node->Type == ACPI_TYPE_DEVICE)    ||
 432         (Node->Type == ACPI_TYPE_PROCESSOR) ||
 433         (Node->Type == ACPI_TYPE_THERMAL))
 434     {
 435         Info->DeviceCount++;
 436         return (AE_OK);
 437     }
 438 
 439     /* We are only looking for methods named _INI */
 440 
 441     if (!ACPI_COMPARE_NAME (Node->Name.Ascii, METHOD_NAME__INI))
 442     {
 443         return (AE_OK);
 444     }
 445 
 446     /*
 447      * The only _INI methods that we care about are those that are
 448      * present under Device, Processor, and Thermal objects.
 449      */
 450     ParentNode = Node->Parent;
 451     switch (ParentNode->Type)
 452     {
 453     case ACPI_TYPE_DEVICE:
 454     case ACPI_TYPE_PROCESSOR:
 455     case ACPI_TYPE_THERMAL:
 456 
 457         /* Mark parent and bubble up the INI present flag to the root */
 458 
 459         while (ParentNode)
 460         {
 461             ParentNode->Flags |= ANOBJ_SUBTREE_HAS_INI;
 462             ParentNode = ParentNode->Parent;
 463         }
 464         break;
 465 
 466     default:
 467 
 468         break;
 469     }
 470 
 471     return (AE_OK);
 472 }
 473 
 474 
 475 /*******************************************************************************
 476  *
 477  * FUNCTION:    AcpiNsInitOneDevice
 478  *
 479  * PARAMETERS:  ACPI_WALK_CALLBACK
 480  *
 481  * RETURN:      ACPI_STATUS
 482  *
 483  * DESCRIPTION: This is called once per device soon after ACPI is enabled
 484  *              to initialize each device. It determines if the device is
 485  *              present, and if so, calls _INI.
 486  *
 487  ******************************************************************************/
 488 
 489 static ACPI_STATUS
 490 AcpiNsInitOneDevice (
 491     ACPI_HANDLE             ObjHandle,
 492     UINT32                  NestingLevel,
 493     void                    *Context,
 494     void                    **ReturnValue)
 495 {
 496     ACPI_DEVICE_WALK_INFO   *WalkInfo = ACPI_CAST_PTR (ACPI_DEVICE_WALK_INFO, Context);
 497     ACPI_EVALUATE_INFO      *Info = WalkInfo->EvaluateInfo;
 498     UINT32                  Flags;
 499     ACPI_STATUS             Status;
 500     ACPI_NAMESPACE_NODE     *DeviceNode;
 501 
 502 
 503     ACPI_FUNCTION_TRACE (NsInitOneDevice);
 504 
 505 
 506     /* We are interested in Devices, Processors and ThermalZones only */
 507 
 508     DeviceNode = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, ObjHandle);
 509     if ((DeviceNode->Type != ACPI_TYPE_DEVICE)    &&
 510         (DeviceNode->Type != ACPI_TYPE_PROCESSOR) &&
 511         (DeviceNode->Type != ACPI_TYPE_THERMAL))
 512     {
 513         return_ACPI_STATUS (AE_OK);
 514     }
 515 
 516     /*
 517      * Because of an earlier namespace analysis, all subtrees that contain an
 518      * _INI method are tagged.
 519      *
 520      * If this device subtree does not contain any _INI methods, we
 521      * can exit now and stop traversing this entire subtree.
 522      */
 523     if (!(DeviceNode->Flags & ANOBJ_SUBTREE_HAS_INI))
 524     {
 525         return_ACPI_STATUS (AE_CTRL_DEPTH);
 526     }
 527 
 528     /*
 529      * Run _STA to determine if this device is present and functioning. We
 530      * must know this information for two important reasons (from ACPI spec):
 531      *
 532      * 1) We can only run _INI if the device is present.
 533      * 2) We must abort the device tree walk on this subtree if the device is
 534      *    not present and is not functional (we will not examine the children)
 535      *
 536      * The _STA method is not required to be present under the device, we
 537      * assume the device is present if _STA does not exist.
 538      */
 539     ACPI_DEBUG_EXEC (AcpiUtDisplayInitPathname (
 540         ACPI_TYPE_METHOD, DeviceNode, METHOD_NAME__STA));
 541 
 542     Status = AcpiUtExecute_STA (DeviceNode, &Flags);
 543     if (ACPI_FAILURE (Status))
 544     {
 545         /* Ignore error and move on to next device */
 546 
 547         return_ACPI_STATUS (AE_OK);
 548     }
 549 
 550     /*
 551      * Flags == -1 means that _STA was not found. In this case, we assume that
 552      * the device is both present and functional.
 553      *
 554      * From the ACPI spec, description of _STA:
 555      *
 556      * "If a device object (including the processor object) does not have an
 557      * _STA object, then OSPM assumes that all of the above bits are set (in
 558      * other words, the device is present, ..., and functioning)"
 559      */
 560     if (Flags != ACPI_UINT32_MAX)
 561     {
 562         WalkInfo->Num_STA++;
 563     }
 564 
 565     /*
 566      * Examine the PRESENT and FUNCTIONING status bits
 567      *
 568      * Note: ACPI spec does not seem to specify behavior for the present but
 569      * not functioning case, so we assume functioning if present.
 570      */
 571     if (!(Flags & ACPI_STA_DEVICE_PRESENT))
 572     {
 573         /* Device is not present, we must examine the Functioning bit */
 574 
 575         if (Flags & ACPI_STA_DEVICE_FUNCTIONING)
 576         {
 577             /*
 578              * Device is not present but is "functioning". In this case,
 579              * we will not run _INI, but we continue to examine the children
 580              * of this device.
 581              *
 582              * From the ACPI spec, description of _STA: (Note - no mention
 583              * of whether to run _INI or not on the device in question)
 584              *
 585              * "_STA may return bit 0 clear (not present) with bit 3 set
 586              * (device is functional). This case is used to indicate a valid
 587              * device for which no device driver should be loaded (for example,
 588              * a bridge device.) Children of this device may be present and
 589              * valid. OSPM should continue enumeration below a device whose
 590              * _STA returns this bit combination"
 591              */
 592             return_ACPI_STATUS (AE_OK);
 593         }
 594         else
 595         {
 596             /*
 597              * Device is not present and is not functioning. We must abort the
 598              * walk of this subtree immediately -- don't look at the children
 599              * of such a device.
 600              *
 601              * From the ACPI spec, description of _INI:
 602              *
 603              * "If the _STA method indicates that the device is not present,
 604              * OSPM will not run the _INI and will not examine the children
 605              * of the device for _INI methods"
 606              */
 607             return_ACPI_STATUS (AE_CTRL_DEPTH);
 608         }
 609     }
 610 
 611     /*
 612      * The device is present or is assumed present if no _STA exists.
 613      * Run the _INI if it exists (not required to exist)
 614      *
 615      * Note: We know there is an _INI within this subtree, but it may not be
 616      * under this particular device, it may be lower in the branch.
 617      */
 618     ACPI_DEBUG_EXEC (AcpiUtDisplayInitPathname (
 619         ACPI_TYPE_METHOD, DeviceNode, METHOD_NAME__INI));
 620 
 621     ACPI_MEMSET (Info, 0, sizeof (ACPI_EVALUATE_INFO));
 622     Info->PrefixNode = DeviceNode;
 623     Info->RelativePathname = METHOD_NAME__INI;
 624     Info->Parameters = NULL;
 625     Info->Flags = ACPI_IGNORE_RETURN_VALUE;
 626 
 627     Status = AcpiNsEvaluate (Info);
 628     if (ACPI_SUCCESS (Status))
 629     {
 630         WalkInfo->Num_INI++;
 631     }
 632 
 633 #ifdef ACPI_DEBUG_OUTPUT
 634     else if (Status != AE_NOT_FOUND)
 635     {
 636         /* Ignore error and move on to next device */
 637 
 638         char *ScopeName = AcpiNsGetExternalPathname (Info->Node);
 639 
 640         ACPI_EXCEPTION ((AE_INFO, Status, "during %s._INI execution",
 641             ScopeName));
 642         ACPI_FREE (ScopeName);
 643     }
 644 #endif
 645 
 646     /* Ignore errors from above */
 647 
 648     Status = AE_OK;
 649 
 650     /*
 651      * The _INI method has been run if present; call the Global Initialization
 652      * Handler for this device.
 653      */
 654     if (AcpiGbl_InitHandler)
 655     {
 656         Status = AcpiGbl_InitHandler (DeviceNode, ACPI_INIT_DEVICE_INI);
 657     }
 658 
 659     return_ACPI_STATUS (Status);
 660 }