/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright 2015, Joyent, Inc. All rights reserved. * INSERT COMMENT */ # # Privileges can be added to this file at any location, not # necessarily at the end. For patches, it is probably best to # add the new privilege at the end; for ordinary releases privileges # should be ordered alphabetically. # privilege PRIV_CONTRACT_EVENT Allows a process to request critical events without limitation. Allows a process to request reliable delivery of all events on any event queue. privilege PRIV_CONTRACT_IDENTITY Allows a process to set the service FMRI value of a process contract template. privilege PRIV_CONTRACT_OBSERVER Allows a process to observe contract events generated by contracts created and owned by users other than the process's effective user ID. Allows a process to open contract event endpoints belonging to contracts created and owned by users other than the process's effective user ID. privilege PRIV_CPC_CPU Allow a process to access per-CPU hardware performance counters. privilege PRIV_DTRACE_KERNEL Allows DTrace kernel-level tracing. privilege PRIV_DTRACE_PROC Allows DTrace process-level tracing. Allows process-level tracing probes to be placed and enabled in processes to which the user has permissions. privilege PRIV_DTRACE_USER Allows DTrace user-level tracing. Allows use of the syscall and profile DTrace providers to examine processes to which the user has permissions. privilege PRIV_FILE_CHOWN Allows a process to change a file's owner user ID. Allows a process to change a file's group ID to one other than the process' effective group ID or one of the process' supplemental group IDs. privilege PRIV_FILE_CHOWN_SELF Allows a process to give away its files; a process with this privilege will run as if {_POSIX_CHOWN_RESTRICTED} is not in effect. privilege PRIV_FILE_DAC_EXECUTE Allows a process to execute an executable file whose permission bits or ACL do not allow the process execute permission. privilege PRIV_FILE_DAC_READ Allows a process to read a file or directory whose permission bits or ACL do not allow the process read permission. privilege PRIV_FILE_DAC_SEARCH Allows a process to search a directory whose permission bits or ACL do not allow the process search permission. privilege PRIV_FILE_DAC_WRITE Allows a process to write a file or directory whose permission bits or ACL do not allow the process write permission. In order to write files owned by uid 0 in the absence of an effective uid of 0 ALL privileges are required. privilege PRIV_FILE_DOWNGRADE_SL Allows a process to set the sensitivity label of a file or directory to a sensitivity label that does not dominate the existing sensitivity label. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_FILE_FLAG_SET Allows a process to set immutable, nounlink or appendonly file attributes. basic privilege PRIV_FILE_LINK_ANY Allows a process to create hardlinks to files owned by a uid different from the process' effective uid. privilege PRIV_FILE_OWNER Allows a process which is not the owner of a file or directory to perform the following operations that are normally permitted only for the file owner: modify that file's access and modification times; remove or rename a file or directory whose parent directory has the ``save text image after execution'' (sticky) bit set; mount a ``namefs'' upon a file; modify permission bits or ACL except for the set-uid and set-gid bits. basic privilege PRIV_FILE_READ Allows a process to read objects in the filesystem. privilege PRIV_FILE_SETID Allows a process to change the ownership of a file or write to a file without the set-user-ID and set-group-ID bits being cleared. Allows a process to set the set-group-ID bit on a file or directory whose group is not the process' effective group or one of the process' supplemental groups. Allows a process to set the set-user-ID bit on a file with different ownership in the presence of PRIV_FILE_OWNER. Additional restrictions apply when creating or modifying a set-uid 0 file. privilege PRIV_FILE_UPGRADE_SL Allows a process to set the sensitivity label of a file or directory to a sensitivity label that dominates the existing sensitivity label. This privilege is interpreted only if the system is configured with Trusted Extensions. basic privilege PRIV_FILE_WRITE Allows a process to modify objects in the filesystem. privilege PRIV_GRAPHICS_ACCESS Allows a process to make privileged ioctls to graphics devices. Typically only xserver process needs to have this privilege. A process with this privilege is also allowed to perform privileged graphics device mappings. privilege PRIV_GRAPHICS_MAP Allows a process to perform privileged mappings through a graphics device. privilege PRIV_IPC_DAC_READ Allows a process to read a System V IPC Message Queue, Semaphore Set, or Shared Memory Segment whose permission bits do not allow the process read permission. Allows a process to read remote shared memory whose permission bits do not allow the process read permission. privilege PRIV_IPC_DAC_WRITE Allows a process to write a System V IPC Message Queue, Semaphore Set, or Shared Memory Segment whose permission bits do not allow the process write permission. Allows a process to read remote shared memory whose permission bits do not allow the process write permission. Additional restrictions apply if the owner of the object has uid 0 and the effective uid of the current process is not 0. privilege PRIV_IPC_OWNER Allows a process which is not the owner of a System V IPC Message Queue, Semaphore Set, or Shared Memory Segment to remove, change ownership of, or change permission bits of the Message Queue, Semaphore Set, or Shared Memory Segment. Additional restrictions apply if the owner of the object has uid 0 and the effective uid of the current process is not 0. basic privilege PRIV_NET_ACCESS Allows a process to open a TCP, UDP, SDP or SCTP network endpoint. privilege PRIV_NET_BINDMLP Allow a process to bind to a port that is configured as a multi-level port(MLP) for the process's zone. This privilege applies to both shared address and zone-specific address MLPs. See tnzonecfg(4) from the Trusted Extensions manual pages for information on configuring MLP ports. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_NET_ICMPACCESS Allows a process to send and receive ICMP packets. privilege PRIV_NET_MAC_AWARE Allows a process to set NET_MAC_AWARE process flag by using setpflags(2). This privilege also allows a process to set SO_MAC_EXEMPT socket option by using setsockopt(3SOCKET). The NET_MAC_AWARE process flag and the SO_MAC_EXEMPT socket option both allow a local process to communicate with an unlabeled peer if the local process' label dominates the peer's default label, or if the local process runs in the global zone. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_NET_MAC_IMPLICIT Allows a process to set SO_MAC_IMPLICIT option by using setsockopt(3SOCKET). This allows a privileged process to transmit implicitly-labeled packets to a peer. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_NET_OBSERVABILITY Allows a process to access /dev/lo0 and the devices in /dev/ipnet/ while not requiring them to need PRIV_NET_RAWACCESS. privilege PRIV_NET_PRIVADDR Allows a process to bind to a privileged port number. The privilege port numbers are 1-1023 (the traditional UNIX privileged ports) as well as those ports marked as "udp/tcp_extra_priv_ports" with the exception of the ports reserved for use by NFS. privilege PRIV_NET_RAWACCESS Allows a process to have direct access to the network layer. unsafe privilege PRIV_PROC_AUDIT Allows a process to generate audit records. Allows a process to get its own audit pre-selection information. privilege PRIV_PROC_CHROOT Allows a process to change its root directory. privilege PRIV_PROC_CLOCK_HIGHRES Allows a process to use high resolution timers. basic privilege PRIV_PROC_EXEC Allows a process to call execve(). basic privilege PRIV_PROC_FORK Allows a process to call fork1()/forkall()/vfork() basic privilege PRIV_PROC_INFO Allows a process to examine the status of processes other than those it can send signals to. Processes which cannot be examined cannot be seen in /proc and appear not to exist. privilege PRIV_PROC_LOCK_MEMORY Allows a process to lock pages in physical memory. privilege PRIV_PROC_MEMINFO Allows a process to access physical memory information. privilege PRIV_PROC_OWNER Allows a process to send signals to other processes, inspect and modify process state to other processes regardless of ownership. When modifying another process, additional restrictions apply: the effective privilege set of the attaching process must be a superset of the target process' effective, permitted and inheritable sets; the limit set must be a superset of the target's limit set; if the target process has any uid set to 0 all privilege must be asserted unless the effective uid is 0. Allows a process to bind arbitrary processes to CPUs. privilege PRIV_PROC_PRIOUP Allows a process to elevate its priority above its current level. privilege PRIV_PROC_PRIOCNTL Allows all that PRIV_PROC_PRIOUP allows. Allows a process to change its scheduling class to any scheduling class, including the RT class. basic privilege PRIV_PROC_SECFLAGS Allows a process to manipulate the secflags of processes (subject to, additionally, the ability to signal that process) basic privilege PRIV_PROC_SESSION Allows a process to send signals or trace processes outside its session. unsafe privilege PRIV_PROC_SETID Allows a process to set its uids at will. Assuming uid 0 requires all privileges to be asserted. privilege PRIV_PROC_TASKID Allows a process to assign a new task ID to the calling process. privilege PRIV_PROC_ZONE Allows a process to trace or send signals to processes in other zones. privilege PRIV_SYS_ACCT Allows a process to enable and disable and manage accounting through acct(2), getacct(2), putacct(2) and wracct(2). privilege PRIV_SYS_ADMIN Allows a process to perform system administration tasks such as setting node and domain name and specifying nscd and coreadm settings. privilege PRIV_SYS_AUDIT Allows a process to start the (kernel) audit daemon. Allows a process to view and set audit state (audit user ID, audit terminal ID, audit sessions ID, audit pre-selection mask). Allows a process to turn off and on auditing. Allows a process to configure the audit parameters (cache and queue sizes, event to class mappings, policy options). privilege PRIV_SYS_CONFIG Allows a process to perform various system configuration tasks. Allows a process to add and remove swap devices; when adding a swap device, a process must also have sufficient privileges to read from and write to the swap device. privilege PRIV_SYS_DEVICES Allows a process to successfully call a kernel module that calls the kernel drv_priv(9F) function to check for allowed access. Allows a process to open the real console device directly. Allows a process to open devices that have been exclusively opened. privilege PRIV_SYS_IPC_CONFIG Allows a process to increase the size of a System V IPC Message Queue buffer. privilege PRIV_SYS_LINKDIR Allows a process to unlink and link directories. privilege PRIV_SYS_MOUNT Allows filesystem specific administrative procedures, such as filesystem configuration ioctls, quota calls and creation/deletion of snapshots. Allows a process to mount and unmount filesystems which would otherwise be restricted (i.e., most filesystems except namefs). A process performing a mount operation needs to have appropriate access to the device being mounted (read-write for "rw" mounts, read for "ro" mounts). A process performing any of the aforementioned filesystem operations needs to have read/write/owner access to the mount point. Only regular files and directories can serve as mount points for processes which do not have all zone privileges asserted. Unless a process has all zone privileges, the mount(2) system call will force the "nosuid" and "restrict" options, the latter only for autofs mountpoints. Regardless of privileges, a process running in a non-global zone may only control mounts performed from within said zone. Outside the global zone, the "nodevices" option is always forced. privilege PRIV_SYS_IPTUN_CONFIG Allows a process to configure IP tunnel links. privilege PRIV_SYS_DL_CONFIG Allows a process to configure all classes of datalinks, including configuration allowed by PRIV_SYS_IPTUN_CONFIG. privilege PRIV_SYS_IP_CONFIG Allows a process to configure a system's IP interfaces and routes. Allows a process to configure network parameters using ndd. Allows a process access to otherwise restricted information using ndd. Allows a process to configure IPsec. Allows a process to pop anchored STREAMs modules with matching zoneid. privilege PRIV_SYS_NET_CONFIG Allows all that PRIV_SYS_IP_CONFIG, PRIV_SYS_DL_CONFIG, and PRIV_SYS_PPP_CONFIG allow. Allows a process to push the rpcmod STREAMs module. Allows a process to INSERT/REMOVE STREAMs modules on locations other than the top of the module stack. privilege PRIV_SYS_NFS Allows a process to perform Sun private NFS specific system calls. Allows a process to bind to ports reserved by NFS: ports 2049 (nfs) and port 4045 (lockd). privilege PRIV_SYS_PPP_CONFIG Allows a process to create and destroy PPP (sppp) interfaces. Allows a process to configure PPP tunnels (sppptun). privilege PRIV_SYS_RES_BIND Allows a process to bind processes to processor sets. privilege PRIV_SYS_RES_CONFIG Allows all that PRIV_SYS_RES_BIND allows. Allows a process to create and delete processor sets, assign CPUs to processor sets and override the PSET_NOESCAPE property. Allows a process to change the operational status of CPUs in the system using p_online(2). Allows a process to configure resource pools and to bind processes to pools unsafe privilege PRIV_SYS_RESOURCE Allows a process to modify the resource limits specified by setrlimit(2) and setrctl(2) without restriction. Allows a process to exceed the per-user maximum number of processes. Allows a process to extend or create files on a filesystem that has less than minfree space in reserve. privilege PRIV_SYS_SMB Allows a process to access the Sun private SMB kernel module. Allows a process to bind to ports reserved by NetBIOS and SMB: ports 137 (NBNS), 138 (NetBIOS Datagram Service), 139 (NetBIOS Session Service and SMB-over-NBT) and 445 (SMB-over-TCP). privilege PRIV_SYS_SUSER_COMPAT Allows a process to successfully call a third party loadable module that calls the kernel suser() function to check for allowed access. This privilege exists only for third party loadable module compatibility and is not used by Solaris proper. privilege PRIV_SYS_TIME Allows a process to manipulate system time using any of the appropriate system calls: stime, adjtime, ntp_adjtime and the IA specific RTC calls. privilege PRIV_SYS_TRANS_LABEL Allows a process to translate labels that are not dominated by the process' sensitivity label to and from an external string form. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_VIRT_MANAGE Allows a process to manage virtualized environments such as xVM(5). privilege PRIV_WIN_COLORMAP Allows a process to override colormap restrictions. Allows a process to install or remove colormaps. Allows a process to retrieve colormap cell entries allocated by other processes. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_WIN_CONFIG Allows a process to configure or destroy resources that are permanently retained by the X server. Allows a process to use SetScreenSaver to set the screen saver timeout value. Allows a process to use ChangeHosts to modify the display access control list. Allows a process to use GrabServer. Allows a process to use the SetCloseDownMode request which may retain window, pixmap, colormap, property, cursor, font, or graphic context resources. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_WIN_DAC_READ Allows a process to read from a window resource that it does not own (has a different user ID). This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_WIN_DAC_WRITE Allows a process to write to or create a window resource that it does not own (has a different user ID). A newly created window property is created with the window's user ID. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_WIN_DEVICES Allows a process to perform operations on window input devices. Allows a process to get and set keyboard and pointer controls. Allows a process to modify pointer button and key mappings. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_WIN_DGA Allows a process to use the direct graphics access (DGA) X protocol extensions. Direct process access to the frame buffer is still required. Thus the process must have MAC and DAC privileges that allow access to the frame buffer, or the frame buffer must be allocated to the process. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_WIN_DOWNGRADE_SL Allows a process to set the sensitivity label of a window resource to a sensitivity label that does not dominate the existing sensitivity label. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_WIN_FONTPATH Allows a process to set a font path. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_WIN_MAC_READ Allows a process to read from a window resource whose sensitivity label is not equal to the process sensitivity label. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_WIN_MAC_WRITE Allows a process to create a window resource whose sensitivity label is not equal to the process sensitivity label. A newly created window property is created with the window's sensitivity label. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_WIN_SELECTION Allows a process to request inter-window data moves without the intervention of the selection confirmer. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_WIN_UPGRADE_SL Allows a process to set the sensitivity label of a window resource to a sensitivity label that dominates the existing sensitivity label. This privilege is interpreted only if the system is configured with Trusted Extensions. privilege PRIV_XVM_CONTROL Allows a process access to the xVM(5) control devices for managing guest domains and the hypervisor. This privilege is used only if booted into xVM on x86 platforms. set PRIV_EFFECTIVE Set of privileges currently in effect. set PRIV_INHERITABLE Set of privileges that comes into effect on exec. set PRIV_PERMITTED Set of privileges that can be put into the effective set without restriction. set PRIV_LIMIT Set of privileges that determines the absolute upper bound of privileges this process and its off-spring can obtain.