1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21 /*
22 * Copyright 2008 Sun Microsystems, Inc. All rights reserved.
23 * Use is subject to license terms.
24 */
25
26 /*
27 * Given several files containing CTF data, merge and uniquify that data into
28 * a single CTF section in an output file.
29 *
30 * Merges can proceed independently. As such, we perform the merges in parallel
31 * using a worker thread model. A given glob of CTF data (either all of the CTF
32 * data from a single input file, or the result of one or more merges) can only
33 * be involved in a single merge at any given time, so the process decreases in
34 * parallelism, especially towards the end, as more and more files are
35 * consolidated, finally resulting in a single merge of two large CTF graphs.
36 * Unfortunately, the last merge is also the slowest, as the two graphs being
37 * merged are each the product of merges of half of the input files.
38 *
39 * The algorithm consists of two phases, described in detail below. The first
40 * phase entails the merging of CTF data in groups of eight. The second phase
41 * takes the results of Phase I, and merges them two at a time. This disparity
42 * is due to an observation that the merge time increases at least quadratically
43 * with the size of the CTF data being merged. As such, merges of CTF graphs
44 * newly read from input files are much faster than merges of CTF graphs that
45 * are themselves the results of prior merges.
46 *
47 * A further complication is the need to ensure the repeatability of CTF merges.
48 * That is, a merge should produce the same output every time, given the same
49 * input. In both phases, this consistency requirement is met by imposing an
50 * ordering on the merge process, thus ensuring that a given set of input files
51 * are merged in the same order every time.
52 *
53 * Phase I
54 *
55 * The main thread reads the input files one by one, transforming the CTF
56 * data they contain into tdata structures. When a given file has been read
57 * and parsed, it is placed on the work queue for retrieval by worker threads.
58 *
59 * Central to Phase I is the Work In Progress (wip) array, which is used to
60 * merge batches of files in a predictable order. Files are read by the main
61 * thread, and are merged into wip array elements in round-robin order. When
62 * the number of files merged into a given array slot equals the batch size,
63 * the merged CTF graph in that array is added to the done slot in order by
64 * array slot.
65 *
66 * For example, consider a case where we have five input files, a batch size
67 * of two, a wip array size of two, and two worker threads (T1 and T2).
68 *
69 * 1. The wip array elements are assigned initial batch numbers 0 and 1.
70 * 2. T1 reads an input file from the input queue (wq_queue). This is the
71 * first input file, so it is placed into wip[0]. The second file is
72 * similarly read and placed into wip[1]. The wip array slots now contain
73 * one file each (wip_nmerged == 1).
74 * 3. T1 reads the third input file, which it merges into wip[0]. The
75 * number of files in wip[0] is equal to the batch size.
76 * 4. T2 reads the fourth input file, which it merges into wip[1]. wip[1]
77 * is now full too.
78 * 5. T2 attempts to place the contents of wip[1] on the done queue
79 * (wq_done_queue), but it can't, since the batch ID for wip[1] is 1.
80 * Batch 0 needs to be on the done queue before batch 1 can be added, so
81 * T2 blocks on wip[1]'s cv.
82 * 6. T1 attempts to place the contents of wip[0] on the done queue, and
83 * succeeds, updating wq_lastdonebatch to 0. It clears wip[0], and sets
84 * its batch ID to 2. T1 then signals wip[1]'s cv to awaken T2.
85 * 7. T2 wakes up, notices that wq_lastdonebatch is 0, which means that
86 * batch 1 can now be added. It adds wip[1] to the done queue, clears
87 * wip[1], and sets its batch ID to 3. It signals wip[0]'s cv, and
88 * restarts.
89 *
90 * The above process continues until all input files have been consumed. At
91 * this point, a pair of barriers are used to allow a single thread to move
92 * any partial batches from the wip array to the done array in batch ID order.
93 * When this is complete, wq_done_queue is moved to wq_queue, and Phase II
94 * begins.
95 *
96 * Locking Semantics (Phase I)
97 *
98 * The input queue (wq_queue) and the done queue (wq_done_queue) are
99 * protected by separate mutexes - wq_queue_lock and wq_done_queue. wip
100 * array slots are protected by their own mutexes, which must be grabbed
101 * before releasing the input queue lock. The wip array lock is dropped
102 * when the thread restarts the loop. If the array slot was full, the
103 * array lock will be held while the slot contents are added to the done
104 * queue. The done queue lock is used to protect the wip slot cv's.
105 *
106 * The pow number is protected by the queue lock. The master batch ID
107 * and last completed batch (wq_lastdonebatch) counters are protected *in
108 * Phase I* by the done queue lock.
109 *
110 * Phase II
111 *
112 * When Phase II begins, the queue consists of the merged batches from the
113 * first phase. Assume we have five batches:
114 *
115 * Q: a b c d e
116 *
117 * Using the same batch ID mechanism we used in Phase I, but without the wip
118 * array, worker threads remove two entries at a time from the beginning of
119 * the queue. These two entries are merged, and are added back to the tail
120 * of the queue, as follows:
121 *
122 * Q: a b c d e # start
123 * Q: c d e ab # a, b removed, merged, added to end
124 * Q: e ab cd # c, d removed, merged, added to end
125 * Q: cd eab # e, ab removed, merged, added to end
126 * Q: cdeab # cd, eab removed, merged, added to end
127 *
128 * When one entry remains on the queue, with no merges outstanding, Phase II
129 * finishes. We pre-determine the stopping point by pre-calculating the
130 * number of nodes that will appear on the list. In the example above, the
131 * number (wq_ninqueue) is 9. When ninqueue is 1, we conclude Phase II by
132 * signaling the main thread via wq_done_cv.
133 *
134 * Locking Semantics (Phase II)
135 *
136 * The queue (wq_queue), ninqueue, and the master batch ID and last
137 * completed batch counters are protected by wq_queue_lock. The done
138 * queue and corresponding lock are unused in Phase II as is the wip array.
139 *
140 * Uniquification
141 *
142 * We want the CTF data that goes into a given module to be as small as
143 * possible. For example, we don't want it to contain any type data that may
144 * be present in another common module. As such, after creating the master
145 * tdata_t for a given module, we can, if requested by the user, uniquify it
146 * against the tdata_t from another module (genunix in the case of the SunOS
147 * kernel). We perform a merge between the tdata_t for this module and the
148 * tdata_t from genunix. Nodes found in this module that are not present in
149 * genunix are added to a third tdata_t - the uniquified tdata_t.
150 *
151 * Additive Merges
152 *
153 * In some cases, for example if we are issuing a new version of a common
154 * module in a patch, we need to make sure that the CTF data already present
155 * in that module does not change. Changes to this data would void the CTF
156 * data in any module that uniquified against the common module. To preserve
157 * the existing data, we can perform what is known as an additive merge. In
158 * this case, a final uniquification is performed against the CTF data in the
159 * previous version of the module. The result will be the placement of new
160 * and changed data after the existing data, thus preserving the existing type
161 * ID space.
162 *
163 * Saving the result
164 *
165 * When the merges are complete, the resulting tdata_t is placed into the
166 * output file, replacing the .SUNW_ctf section (if any) already in that file.
167 *
168 * The person who changes the merging thread code in this file without updating
169 * this comment will not live to see the stock hit five.
170 */
171
172 #include <stdio.h>
173 #include <stdlib.h>
174 #include <unistd.h>
175 #include <pthread.h>
176 #include <assert.h>
177 #include <synch.h>
178 #include <signal.h>
179 #include <libgen.h>
180 #include <string.h>
181 #include <errno.h>
182 #include <alloca.h>
183 #include <sys/param.h>
184 #include <sys/types.h>
185 #include <sys/mman.h>
186 #include <sys/sysconf.h>
187
188 #include "ctf_headers.h"
189 #include "ctftools.h"
190 #include "ctfmerge.h"
191 #include "traverse.h"
192 #include "memory.h"
193 #include "fifo.h"
194 #include "barrier.h"
195
196 #pragma init(bigheap)
197
198 #define MERGE_PHASE1_BATCH_SIZE 8
199 #define MERGE_PHASE1_MAX_SLOTS 5
200 #define MERGE_INPUT_THROTTLE_LEN 10
201
202 const char *progname;
203 static char *outfile = NULL;
204 static char *tmpname = NULL;
205 static int dynsym;
206 int debug_level = DEBUG_LEVEL;
207 static size_t maxpgsize = 0x400000;
208
209
210 void
211 usage(void)
212 {
213 (void) fprintf(stderr,
214 "Usage: %s [-fgstv] -l label | -L labelenv -o outfile file ...\n"
215 " %s [-fgstv] -l label | -L labelenv -o outfile -d uniqfile\n"
216 " %*s [-g] [-D uniqlabel] file ...\n"
217 " %s [-fgstv] -l label | -L labelenv -o outfile -w withfile "
218 "file ...\n"
219 " %s [-g] -c srcfile destfile\n"
220 "\n"
221 " Note: if -L labelenv is specified and labelenv is not set in\n"
222 " the environment, a default value is used.\n",
223 progname, progname, strlen(progname), " ",
224 progname, progname);
225 }
226
227 static void
228 bigheap(void)
229 {
230 size_t big, *size;
231 int sizes;
232 struct memcntl_mha mha;
233
234 /*
235 * First, get the available pagesizes.
236 */
237 if ((sizes = getpagesizes(NULL, 0)) == -1)
238 return;
239
240 if (sizes == 1 || (size = alloca(sizeof (size_t) * sizes)) == NULL)
241 return;
242
243 if (getpagesizes(size, sizes) == -1)
244 return;
245
246 while (size[sizes - 1] > maxpgsize)
247 sizes--;
248
249 /* set big to the largest allowed page size */
250 big = size[sizes - 1];
251 if (big & (big - 1)) {
252 /*
253 * The largest page size is not a power of two for some
254 * inexplicable reason; return.
255 */
256 return;
257 }
258
259 /*
260 * Now, align our break to the largest page size.
261 */
262 if (brk((void *)((((uintptr_t)sbrk(0) - 1) & ~(big - 1)) + big)) != 0)
263 return;
264
265 /*
266 * set the preferred page size for the heap
267 */
268 mha.mha_cmd = MHA_MAPSIZE_BSSBRK;
269 mha.mha_flags = 0;
270 mha.mha_pagesize = big;
271
272 (void) memcntl(NULL, 0, MC_HAT_ADVISE, (caddr_t)&mha, 0, 0);
273 }
274
275 static void
276 finalize_phase_one(workqueue_t *wq)
277 {
278 int startslot, i;
279
280 /*
281 * wip slots are cleared out only when maxbatchsz td's have been merged
282 * into them. We're not guaranteed that the number of files we're
283 * merging is a multiple of maxbatchsz, so there will be some partial
284 * groups in the wip array. Move them to the done queue in batch ID
285 * order, starting with the slot containing the next batch that would
286 * have been placed on the done queue, followed by the others.
287 * One thread will be doing this while the others wait at the barrier
288 * back in worker_thread(), so we don't need to worry about pesky things
289 * like locks.
290 */
291
292 for (startslot = -1, i = 0; i < wq->wq_nwipslots; i++) {
293 if (wq->wq_wip[i].wip_batchid == wq->wq_lastdonebatch + 1) {
294 startslot = i;
295 break;
296 }
297 }
298
299 assert(startslot != -1);
300
301 for (i = startslot; i < startslot + wq->wq_nwipslots; i++) {
302 int slotnum = i % wq->wq_nwipslots;
303 wip_t *wipslot = &wq->wq_wip[slotnum];
304
305 if (wipslot->wip_td != NULL) {
306 debug(2, "clearing slot %d (%d) (saving %d)\n",
307 slotnum, i, wipslot->wip_nmerged);
308 } else
309 debug(2, "clearing slot %d (%d)\n", slotnum, i);
310
311 if (wipslot->wip_td != NULL) {
312 fifo_add(wq->wq_donequeue, wipslot->wip_td);
313 wq->wq_wip[slotnum].wip_td = NULL;
314 }
315 }
316
317 wq->wq_lastdonebatch = wq->wq_next_batchid++;
318
319 debug(2, "phase one done: donequeue has %d items\n",
320 fifo_len(wq->wq_donequeue));
321 }
322
323 static void
324 init_phase_two(workqueue_t *wq)
325 {
326 int num;
327
328 /*
329 * We're going to continually merge the first two entries on the queue,
330 * placing the result on the end, until there's nothing left to merge.
331 * At that point, everything will have been merged into one. The
332 * initial value of ninqueue needs to be equal to the total number of
333 * entries that will show up on the queue, both at the start of the
334 * phase and as generated by merges during the phase.
335 */
336 wq->wq_ninqueue = num = fifo_len(wq->wq_donequeue);
337 while (num != 1) {
338 wq->wq_ninqueue += num / 2;
339 num = num / 2 + num % 2;
340 }
341
342 /*
343 * Move the done queue to the work queue. We won't be using the done
344 * queue in phase 2.
345 */
346 assert(fifo_len(wq->wq_queue) == 0);
347 fifo_free(wq->wq_queue, NULL);
348 wq->wq_queue = wq->wq_donequeue;
349 }
350
351 static void
352 wip_save_work(workqueue_t *wq, wip_t *slot, int slotnum)
353 {
354 pthread_mutex_lock(&wq->wq_donequeue_lock);
355
356 while (wq->wq_lastdonebatch + 1 < slot->wip_batchid)
357 pthread_cond_wait(&slot->wip_cv, &wq->wq_donequeue_lock);
358 assert(wq->wq_lastdonebatch + 1 == slot->wip_batchid);
359
360 fifo_add(wq->wq_donequeue, slot->wip_td);
361 wq->wq_lastdonebatch++;
362 pthread_cond_signal(&wq->wq_wip[(slotnum + 1) %
363 wq->wq_nwipslots].wip_cv);
364
365 /* reset the slot for next use */
366 slot->wip_td = NULL;
367 slot->wip_batchid = wq->wq_next_batchid++;
368
369 pthread_mutex_unlock(&wq->wq_donequeue_lock);
370 }
371
372 static void
373 wip_add_work(wip_t *slot, tdata_t *pow)
374 {
375 if (slot->wip_td == NULL) {
376 slot->wip_td = pow;
377 slot->wip_nmerged = 1;
378 } else {
379 debug(2, "%d: merging %p into %p\n", pthread_self(),
380 (void *)pow, (void *)slot->wip_td);
381
382 merge_into_master(pow, slot->wip_td, NULL, 0);
383 tdata_free(pow);
384
385 slot->wip_nmerged++;
386 }
387 }
388
389 static void
390 worker_runphase1(workqueue_t *wq)
391 {
392 wip_t *wipslot;
393 tdata_t *pow;
394 int wipslotnum, pownum;
395
396 for (;;) {
397 pthread_mutex_lock(&wq->wq_queue_lock);
398
399 while (fifo_empty(wq->wq_queue)) {
400 if (wq->wq_nomorefiles == 1) {
401 pthread_cond_broadcast(&wq->wq_work_avail);
402 pthread_mutex_unlock(&wq->wq_queue_lock);
403
404 /* on to phase 2 ... */
405 return;
406 }
407
408 pthread_cond_wait(&wq->wq_work_avail,
409 &wq->wq_queue_lock);
410 }
411
412 /* there's work to be done! */
413 pow = fifo_remove(wq->wq_queue);
414 pownum = wq->wq_nextpownum++;
415 pthread_cond_broadcast(&wq->wq_work_removed);
416
417 assert(pow != NULL);
418
419 /* merge it into the right slot */
420 wipslotnum = pownum % wq->wq_nwipslots;
421 wipslot = &wq->wq_wip[wipslotnum];
422
423 pthread_mutex_lock(&wipslot->wip_lock);
424
425 pthread_mutex_unlock(&wq->wq_queue_lock);
426
427 wip_add_work(wipslot, pow);
428
429 if (wipslot->wip_nmerged == wq->wq_maxbatchsz)
430 wip_save_work(wq, wipslot, wipslotnum);
431
432 pthread_mutex_unlock(&wipslot->wip_lock);
433 }
434 }
435
436 static void
437 worker_runphase2(workqueue_t *wq)
438 {
439 tdata_t *pow1, *pow2;
440 int batchid;
441
442 for (;;) {
443 pthread_mutex_lock(&wq->wq_queue_lock);
444
445 if (wq->wq_ninqueue == 1) {
446 pthread_cond_broadcast(&wq->wq_work_avail);
447 pthread_mutex_unlock(&wq->wq_queue_lock);
448
449 debug(2, "%d: entering p2 completion barrier\n",
450 pthread_self());
451 if (barrier_wait(&wq->wq_bar1)) {
452 pthread_mutex_lock(&wq->wq_queue_lock);
453 wq->wq_alldone = 1;
454 pthread_cond_signal(&wq->wq_alldone_cv);
455 pthread_mutex_unlock(&wq->wq_queue_lock);
456 }
457
458 return;
459 }
460
461 if (fifo_len(wq->wq_queue) < 2) {
462 pthread_cond_wait(&wq->wq_work_avail,
463 &wq->wq_queue_lock);
464 pthread_mutex_unlock(&wq->wq_queue_lock);
465 continue;
466 }
467
468 /* there's work to be done! */
469 pow1 = fifo_remove(wq->wq_queue);
470 pow2 = fifo_remove(wq->wq_queue);
471 wq->wq_ninqueue -= 2;
472
473 batchid = wq->wq_next_batchid++;
474
475 pthread_mutex_unlock(&wq->wq_queue_lock);
476
477 debug(2, "%d: merging %p into %p\n", pthread_self(),
478 (void *)pow1, (void *)pow2);
479 merge_into_master(pow1, pow2, NULL, 0);
480 tdata_free(pow1);
481
482 /*
483 * merging is complete. place at the tail of the queue in
484 * proper order.
485 */
486 pthread_mutex_lock(&wq->wq_queue_lock);
487 while (wq->wq_lastdonebatch + 1 != batchid) {
488 pthread_cond_wait(&wq->wq_done_cv,
489 &wq->wq_queue_lock);
490 }
491
492 wq->wq_lastdonebatch = batchid;
493
494 fifo_add(wq->wq_queue, pow2);
495 debug(2, "%d: added %p to queue, len now %d, ninqueue %d\n",
496 pthread_self(), (void *)pow2, fifo_len(wq->wq_queue),
497 wq->wq_ninqueue);
498 pthread_cond_broadcast(&wq->wq_done_cv);
499 pthread_cond_signal(&wq->wq_work_avail);
500 pthread_mutex_unlock(&wq->wq_queue_lock);
501 }
502 }
503
504 /*
505 * Main loop for worker threads.
506 */
507 static void
508 worker_thread(workqueue_t *wq)
509 {
510 worker_runphase1(wq);
511
512 debug(2, "%d: entering first barrier\n", pthread_self());
513
514 if (barrier_wait(&wq->wq_bar1)) {
515
516 debug(2, "%d: doing work in first barrier\n", pthread_self());
517
518 finalize_phase_one(wq);
519
520 init_phase_two(wq);
521
522 debug(2, "%d: ninqueue is %d, %d on queue\n", pthread_self(),
523 wq->wq_ninqueue, fifo_len(wq->wq_queue));
524 }
525
526 debug(2, "%d: entering second barrier\n", pthread_self());
527
528 (void) barrier_wait(&wq->wq_bar2);
529
530 debug(2, "%d: phase 1 complete\n", pthread_self());
531
532 worker_runphase2(wq);
533 }
534
535 /*
536 * Pass a tdata_t tree, built from an input file, off to the work queue for
537 * consumption by worker threads.
538 */
539 static int
540 merge_ctf_cb(tdata_t *td, char *name, void *arg)
541 {
542 workqueue_t *wq = arg;
543
544 debug(3, "Adding tdata %p for processing\n", (void *)td);
545
546 pthread_mutex_lock(&wq->wq_queue_lock);
547 while (fifo_len(wq->wq_queue) > wq->wq_ithrottle) {
548 debug(2, "Throttling input (len = %d, throttle = %d)\n",
549 fifo_len(wq->wq_queue), wq->wq_ithrottle);
550 pthread_cond_wait(&wq->wq_work_removed, &wq->wq_queue_lock);
551 }
552
553 fifo_add(wq->wq_queue, td);
554 debug(1, "Thread %d announcing %s\n", pthread_self(), name);
555 pthread_cond_broadcast(&wq->wq_work_avail);
556 pthread_mutex_unlock(&wq->wq_queue_lock);
557
558 return (1);
559 }
560
561 /*
562 * This program is intended to be invoked from a Makefile, as part of the build.
563 * As such, in the event of a failure or user-initiated interrupt (^C), we need
564 * to ensure that a subsequent re-make will cause ctfmerge to be executed again.
565 * Unfortunately, ctfmerge will usually be invoked directly after (and as part
566 * of the same Makefile rule as) a link, and will operate on the linked file
567 * in place. If we merely exit upon receipt of a SIGINT, a subsequent make
568 * will notice that the *linked* file is newer than the object files, and thus
569 * will not reinvoke ctfmerge. The only way to ensure that a subsequent make
570 * reinvokes ctfmerge, is to remove the file to which we are adding CTF
571 * data (confusingly named the output file). This means that the link will need
572 * to happen again, but links are generally fast, and we can't allow the merge
573 * to be skipped.
574 *
575 * Another possibility would be to block SIGINT entirely - to always run to
576 * completion. The run time of ctfmerge can, however, be measured in minutes
577 * in some cases, so this is not a valid option.
578 */
579 static void
580 handle_sig(int sig)
581 {
582 terminate("Caught signal %d - exiting\n", sig);
583 }
584
585 static void
586 terminate_cleanup(void)
587 {
588 int dounlink = getenv("CTFMERGE_TERMINATE_NO_UNLINK") ? 0 : 1;
589
590 if (tmpname != NULL && dounlink)
591 unlink(tmpname);
592
593 if (outfile == NULL)
594 return;
595
596 if (dounlink) {
597 fprintf(stderr, "Removing %s\n", outfile);
598 unlink(outfile);
599 }
600 }
601
602 static void
603 copy_ctf_data(char *srcfile, char *destfile)
604 {
605 tdata_t *srctd;
606
607 if (read_ctf(&srcfile, 1, NULL, read_ctf_save_cb, &srctd, 1) == 0)
608 terminate("No CTF data found in source file %s\n", srcfile);
609
610 tmpname = mktmpname(destfile, ".ctf");
611 write_ctf(srctd, destfile, tmpname, CTF_COMPRESS);
612 if (rename(tmpname, destfile) != 0) {
613 terminate("Couldn't rename temp file %s to %s", tmpname,
614 destfile);
615 }
616 free(tmpname);
617 tdata_free(srctd);
618 }
619
620 static void
621 wq_init(workqueue_t *wq, int nfiles)
622 {
623 int throttle, nslots, i;
624
625 if (getenv("CTFMERGE_MAX_SLOTS"))
626 nslots = atoi(getenv("CTFMERGE_MAX_SLOTS"));
627 else
628 nslots = MERGE_PHASE1_MAX_SLOTS;
629
630 if (getenv("CTFMERGE_PHASE1_BATCH_SIZE"))
631 wq->wq_maxbatchsz = atoi(getenv("CTFMERGE_PHASE1_BATCH_SIZE"));
632 else
633 wq->wq_maxbatchsz = MERGE_PHASE1_BATCH_SIZE;
634
635 nslots = MIN(nslots, (nfiles + wq->wq_maxbatchsz - 1) /
636 wq->wq_maxbatchsz);
637
638 wq->wq_wip = xcalloc(sizeof (wip_t) * nslots);
639 wq->wq_nwipslots = nslots;
640 wq->wq_nthreads = MIN(sysconf(_SC_NPROCESSORS_ONLN) * 3 / 2, nslots);
641 wq->wq_thread = xmalloc(sizeof (pthread_t) * wq->wq_nthreads);
642
643 if (getenv("CTFMERGE_INPUT_THROTTLE"))
644 throttle = atoi(getenv("CTFMERGE_INPUT_THROTTLE"));
645 else
646 throttle = MERGE_INPUT_THROTTLE_LEN;
647 wq->wq_ithrottle = throttle * wq->wq_nthreads;
648
649 debug(1, "Using %d slots, %d threads\n", wq->wq_nwipslots,
650 wq->wq_nthreads);
651
652 wq->wq_next_batchid = 0;
653
654 for (i = 0; i < nslots; i++) {
655 pthread_mutex_init(&wq->wq_wip[i].wip_lock, NULL);
656 wq->wq_wip[i].wip_batchid = wq->wq_next_batchid++;
657 }
658
659 pthread_mutex_init(&wq->wq_queue_lock, NULL);
660 wq->wq_queue = fifo_new();
661 pthread_cond_init(&wq->wq_work_avail, NULL);
662 pthread_cond_init(&wq->wq_work_removed, NULL);
663 wq->wq_ninqueue = nfiles;
664 wq->wq_nextpownum = 0;
665
666 pthread_mutex_init(&wq->wq_donequeue_lock, NULL);
667 wq->wq_donequeue = fifo_new();
668 wq->wq_lastdonebatch = -1;
669
670 pthread_cond_init(&wq->wq_done_cv, NULL);
671
672 pthread_cond_init(&wq->wq_alldone_cv, NULL);
673 wq->wq_alldone = 0;
674
675 barrier_init(&wq->wq_bar1, wq->wq_nthreads);
676 barrier_init(&wq->wq_bar2, wq->wq_nthreads);
677
678 wq->wq_nomorefiles = 0;
679 }
680
681 static void
682 start_threads(workqueue_t *wq)
683 {
684 sigset_t sets;
685 int i;
686
687 sigemptyset(&sets);
688 sigaddset(&sets, SIGINT);
689 sigaddset(&sets, SIGQUIT);
690 sigaddset(&sets, SIGTERM);
691 pthread_sigmask(SIG_BLOCK, &sets, NULL);
692
693 for (i = 0; i < wq->wq_nthreads; i++) {
694 pthread_create(&wq->wq_thread[i], NULL,
695 (void *(*)(void *))worker_thread, wq);
696 }
697
698 sigset(SIGINT, handle_sig);
699 sigset(SIGQUIT, handle_sig);
700 sigset(SIGTERM, handle_sig);
701 pthread_sigmask(SIG_UNBLOCK, &sets, NULL);
702 }
703
704 static void
705 join_threads(workqueue_t *wq)
706 {
707 int i;
708
709 for (i = 0; i < wq->wq_nthreads; i++) {
710 pthread_join(wq->wq_thread[i], NULL);
711 }
712 }
713
714 static int
715 strcompare(const void *p1, const void *p2)
716 {
717 char *s1 = *((char **)p1);
718 char *s2 = *((char **)p2);
719
720 return (strcmp(s1, s2));
721 }
722
723 /*
724 * Core work queue structure; passed to worker threads on thread creation
725 * as the main point of coordination. Allocate as a static structure; we
726 * could have put this into a local variable in main, but passing a pointer
727 * into your stack to another thread is fragile at best and leads to some
728 * hard-to-debug failure modes.
729 */
730 static workqueue_t wq;
731
732 int
733 main(int argc, char **argv)
734 {
735 tdata_t *mstrtd, *savetd;
736 char *uniqfile = NULL, *uniqlabel = NULL;
737 char *withfile = NULL;
738 char *label = NULL;
739 char **ifiles, **tifiles;
740 int verbose = 0, docopy = 0;
741 int write_fuzzy_match = 0;
742 int require_ctf = 0;
743 int nifiles, nielems;
744 int c, i, idx, tidx, err;
745
746 progname = basename(argv[0]);
747
748 if (getenv("CTFMERGE_DEBUG_LEVEL"))
749 debug_level = atoi(getenv("CTFMERGE_DEBUG_LEVEL"));
750
751 err = 0;
752 while ((c = getopt(argc, argv, ":cd:D:fl:L:o:tvw:s")) != EOF) {
753 switch (c) {
754 case 'c':
755 docopy = 1;
756 break;
757 case 'd':
758 /* Uniquify against `uniqfile' */
759 uniqfile = optarg;
760 break;
761 case 'D':
762 /* Uniquify against label `uniqlabel' in `uniqfile' */
763 uniqlabel = optarg;
764 break;
765 case 'f':
766 write_fuzzy_match = CTF_FUZZY_MATCH;
767 break;
768 case 'l':
769 /* Label merged types with `label' */
770 label = optarg;
771 break;
772 case 'L':
773 /* Label merged types with getenv(`label`) */
774 if ((label = getenv(optarg)) == NULL)
775 label = CTF_DEFAULT_LABEL;
776 break;
777 case 'o':
778 /* Place merged types in CTF section in `outfile' */
779 outfile = optarg;
780 break;
781 case 't':
782 /* Insist *all* object files built from C have CTF */
783 require_ctf = 1;
784 break;
785 case 'v':
786 /* More debugging information */
787 verbose = 1;
788 break;
789 case 'w':
790 /* Additive merge with data from `withfile' */
791 withfile = optarg;
792 break;
793 case 's':
794 /* use the dynsym rather than the symtab */
795 dynsym = CTF_USE_DYNSYM;
796 break;
797 default:
798 usage();
799 exit(2);
800 }
801 }
802
803 /* Validate arguments */
804 if (docopy) {
805 if (uniqfile != NULL || uniqlabel != NULL || label != NULL ||
806 outfile != NULL || withfile != NULL || dynsym != 0)
807 err++;
808
809 if (argc - optind != 2)
810 err++;
811 } else {
812 if (uniqfile != NULL && withfile != NULL)
813 err++;
814
815 if (uniqlabel != NULL && uniqfile == NULL)
816 err++;
817
818 if (outfile == NULL || label == NULL)
819 err++;
820
821 if (argc - optind == 0)
822 err++;
823 }
824
825 if (err) {
826 usage();
827 exit(2);
828 }
829
830 if (uniqfile && access(uniqfile, R_OK) != 0) {
831 warning("Uniquification file %s couldn't be opened and "
832 "will be ignored.\n", uniqfile);
833 uniqfile = NULL;
834 }
835 if (withfile && access(withfile, R_OK) != 0) {
836 warning("With file %s couldn't be opened and will be "
837 "ignored.\n", withfile);
838 withfile = NULL;
839 }
840 if (outfile && access(outfile, R_OK|W_OK) != 0)
841 terminate("Cannot open output file %s for r/w", outfile);
842
843 /*
844 * This is ugly, but we don't want to have to have a separate tool
845 * (yet) just for copying an ELF section with our specific requirements,
846 * so we shoe-horn a copier into ctfmerge.
847 */
848 if (docopy) {
849 copy_ctf_data(argv[optind], argv[optind + 1]);
850
851 exit(0);
852 }
853
854 set_terminate_cleanup(terminate_cleanup);
855
856 /* Sort the input files and strip out duplicates */
857 nifiles = argc - optind;
858 ifiles = xmalloc(sizeof (char *) * nifiles);
859 tifiles = xmalloc(sizeof (char *) * nifiles);
860
861 for (i = 0; i < nifiles; i++)
862 tifiles[i] = argv[optind + i];
863 qsort(tifiles, nifiles, sizeof (char *), (int (*)())strcompare);
864
865 ifiles[0] = tifiles[0];
866 for (idx = 0, tidx = 1; tidx < nifiles; tidx++) {
867 if (strcmp(ifiles[idx], tifiles[tidx]) != 0)
868 ifiles[++idx] = tifiles[tidx];
869 }
870 nifiles = idx + 1;
871
872 /* Make sure they all exist */
873 if ((nielems = count_files(ifiles, nifiles)) < 0)
874 terminate("Some input files were inaccessible\n");
875
876 /* Prepare for the merge */
877 wq_init(&wq, nielems);
878
879 start_threads(&wq);
880
881 /*
882 * Start the merge
883 *
884 * We're reading everything from each of the object files, so we
885 * don't need to specify labels.
886 */
887 if (read_ctf(ifiles, nifiles, NULL, merge_ctf_cb,
888 &wq, require_ctf) == 0) {
889 /*
890 * If we're verifying that C files have CTF, it's safe to
891 * assume that in this case, we're building only from assembly
892 * inputs.
893 */
894 if (require_ctf)
895 exit(0);
896 terminate("No ctf sections found to merge\n");
897 }
898
899 pthread_mutex_lock(&wq.wq_queue_lock);
900 wq.wq_nomorefiles = 1;
901 pthread_cond_broadcast(&wq.wq_work_avail);
902 pthread_mutex_unlock(&wq.wq_queue_lock);
903
904 pthread_mutex_lock(&wq.wq_queue_lock);
905 while (wq.wq_alldone == 0)
906 pthread_cond_wait(&wq.wq_alldone_cv, &wq.wq_queue_lock);
907 pthread_mutex_unlock(&wq.wq_queue_lock);
908
909 join_threads(&wq);
910
911 /*
912 * All requested files have been merged, with the resulting tree in
913 * mstrtd. savetd is the tree that will be placed into the output file.
914 *
915 * Regardless of whether we're doing a normal uniquification or an
916 * additive merge, we need a type tree that has been uniquified
917 * against uniqfile or withfile, as appropriate.
918 *
919 * If we're doing a uniquification, we stuff the resulting tree into
920 * outfile. Otherwise, we add the tree to the tree already in withfile.
921 */
922 assert(fifo_len(wq.wq_queue) == 1);
923 mstrtd = fifo_remove(wq.wq_queue);
924
925 if (verbose || debug_level) {
926 debug(2, "Statistics for td %p\n", (void *)mstrtd);
927
928 iidesc_stats(mstrtd->td_iihash);
929 }
930
931 if (uniqfile != NULL || withfile != NULL) {
932 char *reffile, *reflabel = NULL;
933 tdata_t *reftd;
934
935 if (uniqfile != NULL) {
936 reffile = uniqfile;
937 reflabel = uniqlabel;
938 } else
939 reffile = withfile;
940
941 if (read_ctf(&reffile, 1, reflabel, read_ctf_save_cb,
942 &reftd, require_ctf) == 0) {
943 terminate("No CTF data found in reference file %s\n",
944 reffile);
945 }
946
947 savetd = tdata_new();
948
949 if (CTF_TYPE_ISCHILD(reftd->td_nextid))
950 terminate("No room for additional types in master\n");
951
952 savetd->td_nextid = withfile ? reftd->td_nextid :
953 CTF_INDEX_TO_TYPE(1, TRUE);
954 merge_into_master(mstrtd, reftd, savetd, 0);
955
956 tdata_label_add(savetd, label, CTF_LABEL_LASTIDX);
957
958 if (withfile) {
959 /*
960 * savetd holds the new data to be added to the withfile
961 */
962 tdata_t *withtd = reftd;
963
964 tdata_merge(withtd, savetd);
965
966 savetd = withtd;
967 } else {
968 char uniqname[MAXPATHLEN];
969 labelent_t *parle;
970
971 parle = tdata_label_top(reftd);
972
973 savetd->td_parlabel = xstrdup(parle->le_name);
974
975 strncpy(uniqname, reffile, sizeof (uniqname));
976 uniqname[MAXPATHLEN - 1] = '\0';
977 savetd->td_parname = xstrdup(basename(uniqname));
978 }
979
980 } else {
981 /*
982 * No post processing. Write the merged tree as-is into the
983 * output file.
984 */
985 tdata_label_free(mstrtd);
986 tdata_label_add(mstrtd, label, CTF_LABEL_LASTIDX);
987
988 savetd = mstrtd;
989 }
990
991 tmpname = mktmpname(outfile, ".ctf");
992 write_ctf(savetd, outfile, tmpname,
993 CTF_COMPRESS | write_fuzzy_match | dynsym);
994 if (rename(tmpname, outfile) != 0)
995 terminate("Couldn't rename output temp file %s", tmpname);
996 free(tmpname);
997
998 return (0);
999 }