--- old/usr/src/lib/libprtdiag_psr/sparc/snowbird/common/snowbird.c	Fri Aug  9 07:21:03 2019
+++ /dev/null	Fri Aug  9 00:52:51 2019
@@ -1,1116 +0,0 @@
-/*
- * CDDL HEADER START
- *
- * The contents of this file are subject to the terms of the
- * Common Development and Distribution License (the "License").
- * You may not use this file except in compliance with the License.
- *
- * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
- * or http://www.opensolaris.org/os/licensing.
- * See the License for the specific language governing permissions
- * and limitations under the License.
- *
- * When distributing Covered Code, include this CDDL HEADER in each
- * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
- * If applicable, add the following below this CDDL HEADER, with the
- * fields enclosed by brackets "[]" replaced with your own identifying
- * information: Portions Copyright [yyyy] [name of copyright owner]
- *
- * CDDL HEADER END
- */
-/*
- * Copyright (c) 2004, 2010, Oracle and/or its affiliates. All rights reserved.
- */
-
-
-/*
- * This program prints the diagnostics of Sanibel system. It
- * also prints other miscellaneous information about watchdog, temperature
- * of CPU sensor, firmware versions of SMC and, micro controller role
- * etc. The basic sources of output is PICL, and  SMC.
- */
-
-/* includes */
-
-#include <stdio.h>
-#include <strings.h>
-#include <ctype.h>
-#include <string.h>
-#include <time.h>
-#include <dirent.h>
-#include <sys/param.h>
-#include <picl.h>
-#include <libintl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/systeminfo.h>
-#include <sys/openpromio.h>
-#include <fcntl.h>
-#include <smc_if.h>
-#include <stropts.h>
-#include <alloca.h>
-#include <errno.h>
-#include <poll.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <kstat.h>
-#include <sys/utsname.h>
-#include <stddef.h>
-#include <pdevinfo.h>
-#include <display_sun4u.h>
-#include <libprtdiag.h>
-#include <smclib.h>
-#include <smc_commands.h>
-#include <picldefs.h>
-
-/* #defines for the PICL library API usage and local static variables */
-#define	PD_CPCI_SLOT_TYPE	"cpci"
-#define	PD_PCI_SLOT_TYPE	"pci"
-#define	PD_PRESENT		1
-#define	PD_BLANK		" "
-#define	PD_ENABLED		1
-#define	PD_DISABLED		0
-#define	SNOWBIRD		"SUNW,Netra-CP2300"
-#define	CHASSIS_NODE_NAME	"chassis"
-
-/* #defines for the SMC and IPMI commands */
-#define	POLL_TIMEOUT				10000
-#define	DEFAULT_SEQN				0xff
-
-/* SMC driver */
-#define	PD_SMC_DRV_PATH			"/dev/ctsmc"
-
-/* Constants */
-#define	OBP_PROP_BANNER_NAME		"banner-name"
-#define	OBP_PROP_CLOCK_FREQ		"clock-frequency"
-
-
-
-/* #defines for local usage */
-#define	PD_SUCCESS	0
-#define	PD_FAILURE	1
-#define	PD_INTERNAL_FAILURE	2
-#define	PD_ERROR	-1
-
-/*	static global variables	*/
-static int pd_print_option;
-static uint8_t pd_smc_glbl_enabl_rsp[2];
-static boolean_t pd_hdr_prt		= B_TRUE;
-static int pd_smc_fd			= 0;
-
-
-/* function declarations used in this program */
-static uint32_t pd_check_for_snowbird();
-static uint32_t pd_prt_snowbird_diag();
-static uint32_t pd_check_cpu_health();
-static uint32_t pd_check_tty_debug_mode();
-static uint32_t pd_query_SMC_firmware_version();
-static uint32_t pd_check_slots();
-int32_t pd_prt_slot_info(picl_nodehdl_t, void *);
-int do_prominfo(int syserrlog, char *pname, int log_flag, int prt_flag);
-static uint32_t pd_query_watchdog_state();
-int pd_check_wd_state(picl_nodehdl_t, void *);
-static uint32_t pd_print_fruinfo_hdr();
-static uint32_t pd_print_device_info(int);
-static uint32_t pd_get_role_information();
-static uint32_t pd_get_message_flags();
-static uint32_t pd_get_reset_mode();
-static uint32_t pd_get_sensor_reading();
-static uint32_t pd_get_sensor_threshold();
-static uint32_t pd_prt_cpci_condition(picl_nodehdl_t nodeh);
-static uint32_t pd_check_location_parent(picl_nodehdl_t nodeh);
-static uint64_t
-picldiag_get_uint_propval(picl_nodehdl_t modh, char *prop_name, int *ret);
-static int picldiag_get_clock_freq(picl_nodehdl_t modh, uint32_t *freq);
-static int display_system_clock(picl_nodehdl_t plafh);
-
-/*
- * return the value of the uint prop
- */
-static uint64_t
-picldiag_get_uint_propval(picl_nodehdl_t modh, char *prop_name, int *ret)
-{
-	int		err;
-	picl_prophdl_t	proph;
-	picl_propinfo_t	pinfo;
-	uint8_t		uint8v;
-	uint16_t	uint16v;
-	uint32_t	uint32v;
-	uint64_t	uint64v;
-
-	err = picl_get_propinfo_by_name(modh, prop_name, &pinfo, &proph);
-	if (err != PICL_SUCCESS) {
-		*ret = err;
-		return (0);
-	}
-
-	/*
-	 * If it is not an int or uint prop, return failure
-	 */
-	if ((pinfo.type != PICL_PTYPE_INT) &&
-	    (pinfo.type != PICL_PTYPE_UNSIGNED_INT)) {
-		*ret = PICL_FAILURE;
-		return (0);
-	}
-
-	/* uint prop */
-
-	switch (pinfo.size) {
-	case sizeof (uint8_t):
-		err = picl_get_propval(proph, &uint8v, sizeof (uint8v));
-		*ret = err;
-		return (uint8v);
-	case sizeof (uint16_t):
-		err = picl_get_propval(proph, &uint16v, sizeof (uint16v));
-		*ret = err;
-		return (uint16v);
-	case sizeof (uint32_t):
-		err = picl_get_propval(proph, &uint32v, sizeof (uint32v));
-		*ret = err;
-		return (uint32v);
-	case sizeof (uint64_t):
-		err = picl_get_propval(proph, &uint64v, sizeof (uint64v));
-		*ret = err;
-		return (uint64v);
-	default:	/* not supported size */
-		*ret = PICL_FAILURE;
-		return (0);
-	}
-}
-
-
-
-/*
- * get the clock frequency
- */
-static int
-picldiag_get_clock_freq(picl_nodehdl_t modh, uint32_t *freq)
-{
-#define	ROUND_TO_MHZ(x)	(((x) + 500000)/ 1000000)
-
-	int		err;
-	uint64_t	clk_freq;
-
-	clk_freq = picldiag_get_uint_propval(modh, OBP_PROP_CLOCK_FREQ, &err);
-	if (err != PICL_SUCCESS)
-		return (err);
-
-	*freq = ROUND_TO_MHZ(clk_freq);
-
-	return (PICL_SUCCESS);
-}
-
-
-/*
- * display the clock frequency
- */
-static int
-display_system_clock(picl_nodehdl_t plafh)
-{
-	uint32_t	system_clk;
-	int		err;
-
-	err = picldiag_get_clock_freq(plafh, &system_clk);
-	if (err != PICL_SUCCESS)
-		return (err);
-
-	log_printf(dgettext(TEXT_DOMAIN,
-	    "System clock frequency: %d MHZ\n"), system_clk);
-
-	return (PICL_SUCCESS);
-}
-
-
-/*
- * get the value by the property name of the string prop
- * Caller must free the outbuf
- */
-static int
-picldiag_get_string_propval(picl_nodehdl_t modh, char *prop_name, char **outbuf)
-{
-	int		err;
-	picl_prophdl_t	proph;
-	picl_propinfo_t	pinfo;
-	char		*prop_value;
-
-	err = picl_get_propinfo_by_name(modh, prop_name, &pinfo, &proph);
-	if (err != PICL_SUCCESS)
-		return (err);
-
-	/*
-	 * If it is not a string prop, return NULL
-	 */
-	if (pinfo.type != PICL_PTYPE_CHARSTRING)
-		return (PICL_FAILURE);
-
-	prop_value = malloc(pinfo.size);
-	if (prop_value == NULL)
-		return (PICL_FAILURE);
-
-	err = picl_get_propval(proph, prop_value, pinfo.size);
-	if (err != PICL_SUCCESS) {
-		free(prop_value);
-		return (err);
-	}
-
-	*outbuf = prop_value;
-	return (PICL_SUCCESS);
-}
-
-
-
-/*
- * display platform banner
- */
-static int
-display_platform_banner(picl_nodehdl_t plafh)
-{
-	char	*platform;
-	char	*banner_name;
-	int	err;
-
-	/*
-	 * get PICL_PROP_MACHINE and PICL_PROP_BANNER_NAME
-	 */
-	log_printf(dgettext(TEXT_DOMAIN,
-	    "System Configuration: Oracle Corporation "), 0);
-	err = picldiag_get_string_propval(plafh, PICL_PROP_MACHINE,
-	    &platform);
-	if (err != PICL_SUCCESS)
-		return (err);
-	log_printf(" %s", platform, 0);
-	free(platform);
-
-	err = picldiag_get_string_propval(plafh, OBP_PROP_BANNER_NAME,
-	    &banner_name);
-	if (err != PICL_SUCCESS)
-		return (err);
-	log_printf(" %s", banner_name, 0);
-	free(banner_name);
-
-	log_printf("\n", 0);
-	return (PICL_SUCCESS);
-}
-
-/*
- * search children to get the node by the nodename
- */
-static int
-picldiag_get_node_by_name(picl_nodehdl_t rooth, char *name,
-    picl_nodehdl_t *nodeh)
-{
-	picl_nodehdl_t	childh;
-	int		err;
-	char		*nodename;
-
-	nodename = alloca(strlen(name) + 1);
-	if (nodename == NULL)
-		return (PICL_FAILURE);
-
-	err = picl_get_propval_by_name(rooth, PICL_PROP_CHILD, &childh,
-	    sizeof (picl_nodehdl_t));
-
-	while (err == PICL_SUCCESS) {
-		err = picl_get_propval_by_name(childh, PICL_PROP_NAME,
-		    nodename, (strlen(name) + 1));
-		if (err != PICL_SUCCESS) {
-			err = picl_get_propval_by_name(childh, PICL_PROP_PEER,
-			    &childh, sizeof (picl_nodehdl_t));
-			continue;
-		}
-
-		if (strcmp(nodename, name) == 0) {
-			*nodeh = childh;
-			return (PICL_SUCCESS);
-		}
-
-		err = picl_get_propval_by_name(childh, PICL_PROP_PEER,
-		    &childh, sizeof (picl_nodehdl_t));
-	}
-
-	return (err);
-}
-
-
-/*
- * This routine is invoked when prtdiag starts execution. It prints
- * system configuration, memory size, initializes PICL and acts as
- * a driver routine for prtdiag output for Snowbird.
- */
-/* ARGSUSED */
-int
-do_prominfo(int syserrlog, char *pname, int log_flag, int prt_flag)
-{
-
-	struct mem_total memory_total;	/*	total memory in system	*/
-	struct grp_info grps;
-	uint8_t status = PD_SUCCESS;
-	picl_nodehdl_t rooth;
-	picl_nodehdl_t plafh;
-	struct system_kstat_data *kstats = NULL;
-	Sys_tree *tree = NULL;
-
-	sys_clk = -1;
-	pd_print_option = syserrlog;
-
-	if ((status = picl_initialize()) != PICL_SUCCESS) {
-		log_printf("prtdiag: failed to initialize the PICL\n", 0);
-		exit(1);
-	}
-
-	if ((status = picl_get_root(&rooth)) != PICL_SUCCESS) {
-		log_printf("prtdiag: failed\n", 0);
-		exit(1);
-	}
-
-	status = picldiag_get_node_by_name(rooth, PICL_NODE_PLATFORM, &plafh);
-	if (status != PICL_SUCCESS)
-		return (status);
-
-	if (!log_flag) {
-
-		status = display_platform_banner(plafh);
-		if (status != PICL_SUCCESS)
-			return (status);
-
-		status = display_system_clock(plafh);
-		if (status != PICL_SUCCESS)
-			return (status);
-
-		/* display the memory Size */
-		display_memorysize(tree, kstats, &grps, &memory_total);
-	}
-
-	if ((pd_smc_fd = open(PD_SMC_DRV_PATH, O_RDWR)) == -1)
-		return (PD_FAILURE);
-
-	if ((status = pd_check_for_snowbird()) != PD_SUCCESS)
-		return (status);
-
-	if ((status = pd_prt_snowbird_diag()) != PD_SUCCESS)
-		return (status);
-
-	(void) close(pd_smc_fd);
-
-	if (picl_shutdown() != PICL_SUCCESS)
-		return (PD_INTERNAL_FAILURE);
-
-	return (PD_SUCCESS);
-
-}
-
-/*
- * This routine prints out the platform name.
- */
-
-static uint32_t
-pd_check_for_snowbird()
-{
-
-	char si_platform[30];
-
-	if (sysinfo(SI_PLATFORM, si_platform, sizeof (si_platform)) == -1) {
-		return (PD_FAILURE);
-	}
-	/* is it a Snowbird? */
-	if (strcmp(si_platform, SNOWBIRD) != 0)
-		return (PD_FAILURE);
-
-	log_printf("platform Type : %s\n", si_platform, 0);
-	return (PD_SUCCESS);
-
-}
-
-
-/*
- * Driver routine for satellite specific output. This is also used by
- * host driver routine as all satellite information is printed by host.
- * It also prints some host specific information for formatting purposes
- */
-
-static uint32_t
-pd_prt_snowbird_diag()
-{
-	uint8_t status = PD_SUCCESS;
-	if ((status = pd_check_cpu_health()) != PD_SUCCESS) {
-		return (status);
-	}
-	if (pd_print_option) {
-
-		log_printf(
-		    "\n %11s Other Miscellaneous Information \n",
-		    PD_BLANK, 0);
-		log_printf(
-		    "%12s ------------------------------- \n",
-		    PD_BLANK, 0);
-
-		if ((status = pd_get_role_information()) != PD_SUCCESS) {
-			return (status);
-		}
-
-		if (pd_smc_glbl_enabl_rsp[1] & 0x10) {
-			log_printf(
-			    "IPMI Response Notification\t\tEnabled\n", 0);
-		} else {
-			log_printf(
-			    "IPMI Response Notification\t\tDisabled\n", 0);
-		}
-		if ((status = pd_query_SMC_firmware_version()) != PD_SUCCESS) {
-			return (status);
-		}
-
-		if ((status = pd_check_tty_debug_mode()) != PD_SUCCESS) {
-			return (status);
-		}
-
-		if ((status = pd_get_reset_mode()) != PD_SUCCESS) {
-			return (status);
-		}
-
-		if ((status = pd_get_message_flags()) != PD_SUCCESS) {
-			return (status);
-		}
-
-		if ((status = pd_query_watchdog_state()) != PD_SUCCESS) {
-			return (status);
-		}
-
-		if ((status = pd_get_sensor_reading()) != PD_SUCCESS) {
-			return (status);
-		}
-
-		if ((status = pd_get_sensor_threshold()) != PD_SUCCESS) {
-			return (status);
-		}
-
-	}
-	return (status);
-
-}
-
-/*
- * This routine prints the mode in which SMC is running. It uses the
- * response from SMC global enables to determine the mode
- */
-static uint32_t
-pd_check_tty_debug_mode()
-{
-
-	if (pd_smc_glbl_enabl_rsp[1] & 0x20) {
-		log_printf("SMC verbose mode\t\t\tON\n", 0);
-	} else {
-		log_printf("SMC verbose mode\t\t\tOFF\n", 0);
-	}
-
-	return (PD_SUCCESS);
-}
-
-/* This routine prints SMC f/w version */
-static uint32_t
-pd_query_SMC_firmware_version()
-{
-
-	sc_reqmsg_t req_pkt;
-	sc_rspmsg_t rsp_pkt;
-	uint8_t ver, rev, bldrev;
-
-
-	smc_init_smc_msg(&req_pkt, SMC_QUERY_FIRMWARE_VERSION,
-	    DEFAULT_SEQN, 0);
-	smc_send_msg(-1, &req_pkt, &rsp_pkt, POLL_TIMEOUT);
-	ver = (rsp_pkt.data[0] & 0xf0) >> 4;
-	rev = rsp_pkt.data[0] & 0x0f;
-	bldrev = rsp_pkt.data[2] & 0x3f;
-
-	log_printf("SMC f/w version is\t\t\t%d.%d.%d\n", ver, rev, bldrev, 0);
-
-	return (PD_SUCCESS);
-
-}
-
-/*
- * This routine checks CPU's health by using SMC self test results command
- * It acts as driver routine for printing cPCI slot information
- */
-static uint32_t
-pd_check_cpu_health()
-{
-
-	sc_reqmsg_t req_pkt;
-	sc_rspmsg_t rsp_pkt;
-	uint8_t	dev_id = 0x1f;
-#ifdef DEBUG
-	uint8_t i2c_chk = 0x40;
-#endif
-	uint8_t mem_test = 0x20;
-
-	smc_init_smc_msg(&req_pkt, SMC_GET_SMC_SELF_TEST_RESULT,
-	    DEFAULT_SEQN, 0);
-	smc_send_msg(-1, &req_pkt, &rsp_pkt, POLL_TIMEOUT);
-
-	dev_id = rsp_pkt.data[0] & dev_id;
-
-#ifdef DEBUG
-	if (rsp_pkt.data[0] & i2c_chk) {
-		pd_print_device_info(dev_id);
-	}
-#endif
-	if (rsp_pkt.data[0] & mem_test) {
-		pd_print_device_info(dev_id);
-	}
-	return (pd_check_slots());
-
-}
-
-/*
- * This routine decodes error message for CPU failures and prints details
- * of the failure
- */
-static uint32_t
-pd_print_device_info(int dev_id)
-{
-
-	switch (dev_id) {
-		case 1:
-			log_printf("Mux Philip 9540\n", 0);
-			break;
-		case 2:
-			log_printf("cpu temp max1617\n", 0);
-			break;
-		case 3:
-			log_printf("pmc temp max 1617\n", 0);
-			break;
-		case 4:
-			log_printf("MB HS temp max 1617\n", 0);
-			break;
-		case 5:
-			log_printf("MB mem temp max1617\n", 0);
-			break;
-		case 6:
-			log_printf("MB gpio Philip8574\n", 0);
-			break;
-		case 7:
-			log_printf("MB Fru ID ID i2c eep\n", 0);
-			break;
-		case 8:
-			log_printf("MB enet ID ID i2d eep\n", 0);
-			break;
-		case 9:
-			log_printf("MB gpio Philip8574A\n", 0);
-			break;
-		case 10:
-			log_printf("SDRAM mod1 temp max1617\n", 0);
-			break;
-		case 11:
-			log_printf("SDRAM mod ID  ID i2c eep\n", 0);
-			break;
-		case 12:
-			log_printf("SDRAM mod2 temp max1617\n", 0);
-			break;
-		case 13:
-			log_printf("SDRAM mod ID  ID i2c eep\n", 0);
-			break;
-		case 14:
-			log_printf("Power mod temp ds1721\n", 0);
-			break;
-		case 15:
-			log_printf("Power mod gpio Philip 8574\n", 0);
-			break;
-		case 16:
-			log_printf("Power mod ID eep ST M24C01\n", 0);
-			break;
-		case 17:
-			log_printf("SMC ID i2c eep\n", 0);
-			break;
-
-		default:
-			log_printf("device id unknown\n", 0);
-			break;
-
-	}
-
-	return (PD_SUCCESS);
-
-}
-
-/*
- * This routine walks PICL tree by "Location" class and calls prt_slot_info
- * routine to print the slot information
- */
-
-/*ARGSUSED*/
-static uint32_t
-pd_check_slots()
-{
-
-	picl_nodehdl_t nodeh;
-	char *c_args = NULL;
-
-	if (picl_get_root(&nodeh) != PICL_SUCCESS)
-		return (PD_INTERNAL_FAILURE);
-
-
-	if (picl_walk_tree_by_class(nodeh, PICL_CLASS_LOCATION,
-	    (void *)c_args, pd_prt_slot_info) != PICL_SUCCESS) {
-		return (PD_INTERNAL_FAILURE);
-	}
-
-	return (PD_SUCCESS);
-
-}
-
-
-/*ARGSUSED*/
-int32_t
-
-pd_prt_slot_info(picl_nodehdl_t nodeh, void *c_args)
-{
-
-	char *valbuf;
-	char label_txt[30];
-	int unit_no = -1, ctr = 0;
-	picl_nodehdl_t childh;
-	picl_propinfo_t propinfo;
-	picl_prophdl_t proph;
-
-	/* if not immediate child of "chassis" node, ignore it */
-	if (pd_check_location_parent(nodeh) != PD_SUCCESS)
-		return (PD_INTERNAL_FAILURE);
-
-
-	/* get the label on the location */
-	if (picl_get_prop_by_name(nodeh, PICL_PROP_LABEL,
-	    &proph) != PICL_SUCCESS)
-		return (PD_INTERNAL_FAILURE);
-
-	if (picl_get_propinfo(proph, &propinfo) != PICL_SUCCESS)
-		return (PD_INTERNAL_FAILURE);
-
-	valbuf = (char *) malloc(sizeof (char) * (propinfo.size));
-	if (valbuf == NULL)
-		return (PD_INTERNAL_FAILURE);
-
-	if (picl_get_propval(proph, (void *)valbuf, propinfo.size)
-	    != PICL_SUCCESS) {
-		free(valbuf);
-		return (PD_INTERNAL_FAILURE);
-	}
-
-	while (valbuf[ctr] != ' ' && valbuf[ctr] != NULL) {
-		label_txt[ctr] = valbuf[ctr];
-		++ctr;
-	}
-
-	label_txt[ctr++] = '\0';
-
-	if (valbuf[ctr] != NULL) {
-		unit_no = atoi(valbuf+ctr);
-	}
-
-	free(valbuf);
-
-	/* get the slot type for the location */
-	if (picl_get_prop_by_name(nodeh, PICL_PROP_SLOT_TYPE,
-	    &proph) != PICL_SUCCESS)
-		return (PD_INTERNAL_FAILURE);
-
-	if (picl_get_propinfo(proph, & propinfo) != PICL_SUCCESS)
-		return (PD_INTERNAL_FAILURE);
-
-	valbuf = (char *) malloc(sizeof (char) * (propinfo.size));
-	if (valbuf == NULL)
-		return (PD_INTERNAL_FAILURE);
-
-	if (picl_get_propval(proph, (void *)valbuf,
-	    propinfo.size) != PICL_SUCCESS) {
-		free(valbuf);
-		return (PD_INTERNAL_FAILURE);
-	}
-
-	if ((strcmp(valbuf, PD_CPCI_SLOT_TYPE) == 0) ||
-	    (strcmp(valbuf, PD_PCI_SLOT_TYPE) == 0)) {
-		(void) pd_print_fruinfo_hdr();
-		log_printf("\n%s         ", label_txt, 0);
-
-	/* For Snowbird no unit number is present on the label */
-		unit_no = 1;
-		log_printf(" %d       Yes      cPSB IO Slot\n", unit_no, 0);
-
-		if (picl_get_propval_by_name(nodeh, PICL_PROP_CHILD,
-		    &childh, sizeof (childh)) == PICL_SUCCESS) {
-			pd_prt_cpci_condition(childh);
-		}
-		/* For Snowbird auto configuration is always enabled */
-		log_printf("%29s Properties:\n", PD_BLANK, 0);
-		log_printf("%31s auto-config = enabled\n", PD_BLANK, 0);
-	}
-
-
-	free(valbuf);
-	return (PD_SUCCESS);
-
-}
-
-
-
-static uint32_t
-pd_print_fruinfo_hdr()
-{
-
-	log_printf(
-	    "\n %19s FRU Information \n",
-	    PD_BLANK, 0);
-	log_printf(
-	    "%11s ------------------------------------------------\n",
-	    PD_BLANK, 0);
-
-	log_printf(dgettext(TEXT_DOMAIN,
-	    "FRU         FRU    FRU      Miscellaneous\n"), 0);
-	log_printf(dgettext(TEXT_DOMAIN,
-	    "Type        Unit#  Present  Information\n"), 0);
-	log_printf("----        -----  -------", 0);
-	log_printf("  --------------------------------\n", 0);
-	return (PD_SUCCESS);
-
-}
-
-static uint32_t
-pd_check_location_parent(picl_nodehdl_t nodeh)
-{
-
-	picl_nodehdl_t parenth;
-	char *prop_name;
-
-	if (picl_get_propval_by_name(nodeh, PICL_PROP_PARENT,
-	    &parenth, sizeof (parenth)) != PICL_SUCCESS) {
-		return (PD_FAILURE);
-	}
-
-	prop_name = (char *) malloc(sizeof (char) * PICL_PROPNAMELEN_MAX);
-	if (prop_name == NULL) {
-		return (PD_FAILURE);
-	}
-
-	if (picl_get_propval_by_name(parenth, PICL_PROP_NAME, (void *)prop_name,
-	    PICL_PROPNAMELEN_MAX) != PICL_SUCCESS) {
-		free(prop_name);
-		return (PD_FAILURE);
-	}
-
-	if (strcmp(prop_name, CHASSIS_NODE_NAME) == 0) {
-		free(prop_name);
-		return (PD_SUCCESS);
-	} else {
-		free(prop_name);
-		return (PD_FAILURE);
-	}
-
-}
-
-
-/*ARGSUSED*/
-static uint32_t
-pd_query_watchdog_state()
-{
-
-	picl_nodehdl_t nodehandle;
-	char *c_args = NULL;
-
-	if (picl_get_root(&nodehandle) != PICL_SUCCESS) {
-		return (PD_INTERNAL_FAILURE);
-	}
-
-	if (picl_walk_tree_by_class(nodehandle, PICL_CLASS_WATCHDOG_TIMER,
-	    (void *)c_args, pd_check_wd_state) != PICL_SUCCESS)
-		return (PD_INTERNAL_FAILURE);
-
-	return (PD_SUCCESS);
-
-}
-
-/*ARGSUSED*/
-int
-pd_check_wd_state(picl_nodehdl_t nodeh, void *c_args)
-{
-
-	char *prop_name, *valbuf;
-	picl_propinfo_t propinfo;
-	picl_prophdl_t proph;
-
-	prop_name = (char *) malloc(sizeof (char) * PICL_PROPNAMELEN_MAX);
-	if (prop_name == NULL) {
-		return (PICL_WALK_TERMINATE);
-	}
-
-	if (picl_get_propval_by_name(nodeh, PICL_PROP_NAME,
-	    (void *)prop_name, PICL_PROPNAMELEN_MAX) != PICL_SUCCESS) {
-		free(prop_name);
-		return (PICL_WALK_TERMINATE);
-	}
-
-	if ((picl_get_prop_by_name(nodeh, PICL_PROP_STATE,
-	    &proph)) != PICL_SUCCESS) {
-		free(prop_name);
-		return (PICL_WALK_TERMINATE);
-	}
-
-	if ((picl_get_propinfo(proph, &propinfo)) != PICL_SUCCESS) {
-		free(prop_name);
-		return (PICL_WALK_TERMINATE);
-	}
-
-	valbuf = (char *) malloc(sizeof (char) * (propinfo.size));
-	if (valbuf == NULL) {
-		free(prop_name);
-		return (PICL_WALK_TERMINATE);
-	}
-
-	if ((picl_get_propval(proph, (void *)valbuf,
-	    propinfo.size)) != PICL_SUCCESS) {
-		free(valbuf);
-		free(prop_name);
-		return (PICL_WALK_TERMINATE);
-	}
-
-	if (pd_hdr_prt) {
-		log_printf("\n       Watch Dog Status \n", 0);
-		log_printf("       ---------------- \n", 0);
-		log_printf("Node                      Status\n", 0);
-		log_printf("----                      ------\n", 0);
-		pd_hdr_prt = B_FALSE;
-	}
-
-	log_printf("%s           ", prop_name, 0);
-	log_printf("%s\n", valbuf, 0);
-
-	free(prop_name);
-	free(valbuf);
-	return (PICL_WALK_CONTINUE);
-
-}
-
-
-static uint32_t
-pd_get_role_information()
-{
-
-	sc_reqmsg_t req_pkt;
-	sc_rspmsg_t rsp_pkt;
-	uint8_t usparc_role;
-
-	smc_init_smc_msg(&req_pkt, SMC_GET_ROLE_INFO,
-	    DEFAULT_SEQN, 0);
-	smc_send_msg(-1, &req_pkt, &rsp_pkt, POLL_TIMEOUT);
-	usparc_role = rsp_pkt.data[1];
-
-	log_printf(dgettext(TEXT_DOMAIN,
-	    "UltraSPARC Host Role\t\t\t"), 0);
-	if (usparc_role & 0x80) {
-		log_printf(
-		    dgettext(TEXT_DOMAIN,
-		    "System Board Computer (SBC)\n"), 0);
-	}
-	if (usparc_role & 0x40) {
-		log_printf(dgettext(TEXT_DOMAIN,
-		    "Standby System Board Computer (Standby SBC)\n"), 0);
-	}
-	if (usparc_role & 0x20) {
-		log_printf(dgettext(TEXT_DOMAIN,
-		"Alternate System Board Computer (Alternate SBC)\n"), 0);
-	}
-	if (usparc_role & 0x10) {
-		log_printf(dgettext(TEXT_DOMAIN,
-		    "Satellite Board Computer (SAT)\n"), 0);
-	}
-	return (PD_SUCCESS);
-
-}
-
-
-static uint32_t
-pd_get_message_flags()
-{
-
-	sc_reqmsg_t req_pkt;
-	sc_rspmsg_t rsp_pkt;
-
-	smc_init_smc_msg(&req_pkt, SMC_GET_MESSAGE_FLAGS,
-	    DEFAULT_SEQN, 0);
-	smc_send_msg(-1, &req_pkt, &rsp_pkt, POLL_TIMEOUT);
-
-	if (rsp_pkt.data[0] & 0x01) {
-		log_printf("Messages Available in queue Recieving\n", 0);
-	} else {
-		log_printf("No messages in queue for Recieving\n", 0);
-	}
-
-	return (PD_SUCCESS);
-
-
-}
-
-
-
-static uint32_t
-pd_get_reset_mode()
-{
-
-	sc_reqmsg_t req_pkt;
-	sc_rspmsg_t rsp_pkt;
-
-
-	smc_init_smc_msg(&req_pkt, SMC_GET_CONFIG_BLOCK,
-	    DEFAULT_SEQN,  0);
-	smc_send_msg(-1, &req_pkt, &rsp_pkt, POLL_TIMEOUT);
-
-	log_printf("Reset Mode\t\t\t\t%x \n", rsp_pkt.data[2], 0);
-
-	return (PD_SUCCESS);
-
-}
-
-
-static uint32_t
-pd_get_sensor_reading()
-{
-
-
-	sc_reqmsg_t req_pkt;
-	sc_rspmsg_t rsp_pkt;
-
-	req_pkt.data[0] = 0x0e;
-
-	smc_init_smc_msg(&req_pkt, SMC_SENSOR_READING_GET,
-	    DEFAULT_SEQN, 1);
-	smc_send_msg(-1, &req_pkt, &rsp_pkt, POLL_TIMEOUT);
-	log_printf("\nCPU Node Temperature Information\n", PD_BLANK, 0);
-	log_printf("--------------------------------\n", PD_BLANK, 0);
-	log_printf("Temperature Reading: %d\n\n", rsp_pkt.data[0], 0);
-
-	return (PD_SUCCESS);
-
-}
-
-
-static uint32_t
-pd_get_sensor_threshold()
-{
-
-
-	sc_reqmsg_t req_pkt;
-	sc_rspmsg_t rsp_pkt;
-	uint8_t thres_mask;
-	req_pkt.data[0] = 0x0e;
-
-	smc_init_smc_msg(&req_pkt, SMC_SENSOR_THRESHOLD_GET,
-	    DEFAULT_SEQN,  1);
-	smc_send_msg(-1, &req_pkt, &rsp_pkt, POLL_TIMEOUT);
-	log_printf("Critical Threshold Information\n", 0);
-	log_printf("------------------------------\n", 0);
-
-	thres_mask = rsp_pkt.data[0];
-
-	if (thres_mask & 0x20) {
-		log_printf("High Power-Off Threshold %9s", PD_BLANK, 0);
-		if (rsp_pkt.data[6] & 0x80) {
-			log_printf("-%d\n",
-			    (int)((uint8_t)~rsp_pkt.data[6] + 1), 0);
-		} else {
-			log_printf(" %d\n", rsp_pkt.data[6], 0);
-		}
-	}
-
-	if (thres_mask & 0x10) {
-		log_printf("High Shutdown Threshold %10s", PD_BLANK, 0);
-		if (rsp_pkt.data[5] & 0x80) {
-			log_printf("-%d\n",
-			    (int)((uint8_t)~rsp_pkt.data[5] + 1), 0);
-		} else {
-			log_printf(" %d\n", rsp_pkt.data[5], 0);
-		}
-	}
-
-
-	if (thres_mask & 0x08) {
-		log_printf("High Warning Threshold %11s", PD_BLANK, 0);
-		if (rsp_pkt.data[4] & 0x80) {
-			log_printf("-%d\n",
-			    (int)((uint8_t)~rsp_pkt.data[4] + 1), 0);
-		} else {
-			log_printf(" %d\n", rsp_pkt.data[4], 0);
-		}
-	}
-
-	if (thres_mask & 0x04) {
-		log_printf("Low Power Off Threshold %10s", PD_BLANK, 0);
-		if (rsp_pkt.data[3] & 0x80) {
-			log_printf("-%d\n",
-			    (int)((uint8_t)~rsp_pkt.data[3] + 1), 0);
-		} else {
-			log_printf(" %d\n", rsp_pkt.data[3], 0);
-		}
-	}
-
-	if (thres_mask & 0x02) {
-		log_printf("Low Shutdown Threshold %11s", PD_BLANK, 0);
-		if (rsp_pkt.data[2] & 0x80) {
-			log_printf("-%d\n",
-			    (int)((uint8_t)~rsp_pkt.data[2] + 1), 0);
-		} else {
-			log_printf(" %d\n", rsp_pkt.data[2], 0);
-		}
-	}
-
-	if (thres_mask & 0x01) {
-		log_printf("Low Warning Threshold %12s", PD_BLANK, 0);
-		if (rsp_pkt.data[1] & 0x80) {
-			log_printf("-%d\n",
-			    (int)((uint8_t)~rsp_pkt.data[1] + 1), 0);
-		} else {
-			log_printf(" %d\n", rsp_pkt.data[1], 0);
-		}
-	}
-
-	return (PD_SUCCESS);
-
-}
-
-
-
-static uint32_t
-pd_prt_cpci_condition(picl_nodehdl_t nodeh)
-{
-
-	picl_propinfo_t propinfo;
-	picl_prophdl_t proph;
-	char *valbuf;
-
-
-	if (picl_get_prop_by_name(nodeh, PICL_PROP_CONDITION,
-	    &proph) != PICL_SUCCESS) {
-		return (PD_FAILURE);
-	}
-
-	if (picl_get_propinfo(proph, &propinfo) != PICL_SUCCESS) {
-		return (PD_FAILURE);
-	}
-
-	valbuf = (char *) malloc(sizeof (char) * (propinfo.size));
-	if (valbuf == NULL) {
-		return (PD_FAILURE);
-	}
-
-	if (picl_get_propval(proph, (void *)valbuf,
-	    propinfo.size) != PICL_SUCCESS) {
-		free(valbuf);
-		return (PD_FAILURE);
-	}
-
-
-	log_printf("%29s Condition : %s\n", PD_BLANK, valbuf, 0);
-
-	free(valbuf);
-	return (PD_SUCCESS);
-
-
-}
