Print this page
212 Atheros AR8132 / L1c Gigabit Ethernet Adapter
   1 '\" te

   2 .\" Copyright (c) 2009, Sun Microsystems, Inc. All Rights Reserved
   3 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
   4 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
   5 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
   6 .TH atge 7D "11 Sep 2009" "SunOS 5.11" "Devices"
   7 .SH NAME
   8 atge \- Device driver for Atheros/Attansic Ethernet chipsets
   9 .SH DESCRIPTION
  10 .sp
  11 .LP
  12 The \fBatge\fR ethernet driver is GLD based supporting the Atheros/Attansic L1E
  13 Gigabit Ethernet 10/100/1000 Base (AR8121/AR8113) chipsets:

  14 .sp
  15 .in +2
  16 .nf
  17 pciex1969,1026 Atheros/Attansic GigabitE 10/100/1000 Base (AR8121/AR8113)







  18 .fi
  19 .in -2
  20 .sp
  21 
  22 .sp
  23 .LP
  24 The \fBatge\fR driver supports IEEE 802.3 auto-negotiation, flow control and
  25 VLAN tagging.
  26 .SS "Configuration"
  27 .sp
  28 .LP
  29 The default configuration is auto-negotiation with bi-directional flow control.
  30 The advertised capabilities for auto-negotiation are based on the capabilities
  31 of the \fBPHY\fR.
  32 .sp
  33 .LP
  34 You can set the capabilities advertised by the \fBatge\fR controlled device
  35 using \fBdladm\fR(1M). The driver supports only those parameters which begin
  36 with en (enabled) in the parameters listed by the command \fBdladm\fR(1M). Each
  37 of these boolean parameters determines if the device advertises that mode of


   1 '\" te
   2 .\" Copyright (c) 2012 Gary Mills
   3 .\" Copyright (c) 2009, Sun Microsystems, Inc. All Rights Reserved
   4 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
   5 .\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
   6 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
   7 .TH atge 7D "11 Sep 2009" "SunOS 5.11" "Devices"
   8 .SH NAME
   9 atge \- Device driver for Atheros/Attansic Ethernet chipsets
  10 .SH DESCRIPTION
  11 .sp
  12 .LP
  13 The \fBatge\fR ethernet driver supports the
  14 Atheros/Attansic L1, L1E, and L1C Ethernet
  15 (AR8121/AR8113/8114, AR8131/AR8132, and AR8151/AR8152) chipsets:
  16 .sp
  17 .in +2
  18 .nf
  19 pciex1969,1026 Atheros AR8121/8113/8114
  20 pciex1969,1048 Attansic L1
  21 pciex1969,1062 Atheros AR8132 Fast Ethernet
  22 pciex1969,1063 Atheros AR8131 Gigabit Ethernet
  23 pciex1969,1073 Atheros AR8151 v1.0 Gigabit Ethernet
  24 pciex1969,1083 Atheros AR8151 v2.0 Gigabit Ethernet
  25 pciex1969,2060 Atheros AR8152 v1.1 Fast Ethernet
  26 pciex1969,2062 Atheros AR8152 v2.0 Fast Ethernet
  27 .fi
  28 .in -2
  29 .sp
  30 
  31 .sp
  32 .LP
  33 The \fBatge\fR driver supports IEEE 802.3 auto-negotiation, flow control and
  34 VLAN tagging.
  35 .SS "Configuration"
  36 .sp
  37 .LP
  38 The default configuration is auto-negotiation with bi-directional flow control.
  39 The advertised capabilities for auto-negotiation are based on the capabilities
  40 of the \fBPHY\fR.
  41 .sp
  42 .LP
  43 You can set the capabilities advertised by the \fBatge\fR controlled device
  44 using \fBdladm\fR(1M). The driver supports only those parameters which begin
  45 with en (enabled) in the parameters listed by the command \fBdladm\fR(1M). Each
  46 of these boolean parameters determines if the device advertises that mode of