--- old/usr/src/uts/common/pcmcia/sys/cs_priv.h	Sat Aug  9 23:41:53 2014
+++ /dev/null	Sat Aug  9 23:38:59 2014
@@ -1,774 +0,0 @@
-/*
- * CDDL HEADER START
- *
- * The contents of this file are subject to the terms of the
- * Common Development and Distribution License, Version 1.0 only
- * (the "License").  You may not use this file except in compliance
- * with the License.
- *
- * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
- * or http://www.opensolaris.org/os/licensing.
- * See the License for the specific language governing permissions
- * and limitations under the License.
- *
- * When distributing Covered Code, include this CDDL HEADER in each
- * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
- * If applicable, add the following below this CDDL HEADER, with the
- * fields enclosed by brackets "[]" replaced with your own identifying
- * information: Portions Copyright [yyyy] [name of copyright owner]
- *
- * CDDL HEADER END
- */
-/*
- * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
- * Use is subject to license terms.
- */
-
-#ifndef _CS_PRIV_H
-#define	_CS_PRIV_H
-
-#pragma ident	"%Z%%M%	%I%	%E% SMI"
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-/*
- * PCMCIA Card Services private header file
- */
-
-/*
- * typedef for function pointers to quiet lint and cc -v
- */
-typedef	int32_t (f_t)(int32_t, ...);	/* for lint - cc -v quieting */
-
-/*
- * Magic number we use when talking with Socket Services
- */
-#define	CS_MAGIC	PCCS_MAGIC
-
-/*
- * Make the calls to SocketServices and the CIS Parser look like
- *	function calls.
- */
-#define	SocketServices	(*cs_socket_services)
-#define	CIS_PARSER	(*cis_parser)
-
-/*
- * CIS_DEFAULT_SPEED is the default speed to use to read the CIS
- *	in AM space.  It is expressed in nS.
- */
-#define	CIS_DEFAULT_SPEED	250
-
-/*
- * This is the IO window speed.
- */
-#define	IO_WIN_SPEED		250
-
-/*
- * Flags to support various internal first/next functions. All of
- *	these must be within CIS_GET_LTUPLE_OPMASK which is defined
- *	in the cis.h file. Values outside this mask range are used
- *	internally by the CIS parser.
- */
-#define	CS_GET_FIRST_FLAG	0x0001
-#define	CS_GET_NEXT_FLAG	0x0002
-
-/*
- * Macros to manipulate bits - only does up to uint32_t size
- */
-#define	CS_BIT_WORDSIZE		(sizeof (uint32_t))
-
-#define	CS_BIT_GET(val, bit)	\
-			((uint32_t)(val) & (uint32_t)(1<<(uint32_t)(bit)))
-
-#define	CS_BIT_CLEAR(val, bit)	((val) &= (uint32_t)~(1<<(uint32_t)(bit)))
-
-#define	CS_BIT_SET(val, bit)	\
-			((uint32_t)(val) |= (uint32_t)(1<<(uint32_t)(bit)))
-
-/*
- * Minimum time to wait after socket reset before we are allowed to
- *	access the card.  The PCMCIA specification says at least 20mS
- *	must elapse from the time that the card is reset until the
- *	first access of any kind can be made to the card. This time
- *	value is expressed in mS.
- */
-#define	RESET_TIMEOUT_TIME	180
-
-/*
- * Maximum time to wait for card ready after resetting the socket.
- *	We wait for card ready a maximum of 20 seconds after card
- *	reset before considering that we have an error condition.
- * XXX - what does PCMCIA specify as the max time here??
- */
-#define	READY_TIMEOUT_TIME	(drv_usectohz(20000000))
-
-/*
- * Time between periodically kicking the soft interrupt handler.
- */
-#define	SOFTINT_TIMEOUT_TIME	(drv_usectohz(2000000))
-
-/*
- * Various delays are necessary when switching the card and socket
- *	between IO and memory modes. All delays are in mS.
- *
- *  cs_request_configuration parameters:
- *    CS_RC1_DELAY - delay between writing COR and switching socket
- *			to IO mode
- *    CS_RC2_DELAY - delay after switching socket to IO mode
- *
- *  cs_release_configuration parameters:
- *	CS_RQ_DELAY - amount of time that the RESET bit in the COR is
- *			held asserted
- */
-#define	CS_RC1_DELAY		20	/* COR->IO delay in mS */
-#define	CS_RC2_DELAY		300	/* post-COR delay in mS */
-#define	CS_RQ_DELAY		100	/* COR(RESET) delay in mS */
-
-/*
- * Handy macro to do untimeout.
- */
-#define	UNTIMEOUT(id)		\
-	if ((id)) {		\
-	    (void) untimeout((id));	\
-	    (id) = 0;		\
-	}
-
-/*
- * Macros to enter/exit event thread mutex
- */
-#define	EVENT_THREAD_MUTEX_ENTER(acq, sp)		\
-	acq = !MUTEX_HELD(&sp->client_lock);		\
-	if (acq)					\
-	    mutex_enter(&sp->client_lock);
-#define	EVENT_THREAD_MUTEX_EXIT(acq, sp)		\
-	if (acq)					\
-	    mutex_exit(&sp->client_lock);
-
-/*
- * cisregister_t structure is used to support the CISRegister
- *	and the CISUnregister function calls
- */
-typedef struct cisregister_t {
-	uint32_t		cis_magic;
-	uint32_t		cis_version;
-	void *			(*cis_parser)(int32_t function, ...);
-	cistpl_callout_t	*cistpl_std_callout; /* standard callout list */
-} cisregister_t;
-
-/*
- * These two defines are to support CISRegister and CISUnregister
- */
-#define	CIS_MAGIC	0x20434953
-#define	CIS_VERSION	_VERSION(0, 1)
-
-/*
- * CS_MAX_CIS defines the number of CIS chains that we hang off the per-socket
- *	structure.
- *
- * CS_GLOBAL_CIS defines the index where the CIS parser puts the first CIS list
- *	for a single-function card or the global CIS list for a multi-function
- *	card.
- *
- * CS_MAX_CIS is one greater than CIS_MAX_FUNCTIONS since the CIS parser
- *	puts the global CIS chain on the CS_GLOBAL_CIS function index as
- * 	follows:
- *
- *	For single-function cards:
- *	    sp->cis[0] - CIS chain
- *	    sp->cis[1..(CIS_MAX_FUNCTIONS - 1)] - not used
- *	    sp->cis[CS_GLOBAL_CIS] - not used
- *
- *	For multi-function cards:
- *	    sp->cis[0..(CIS_MAX_FUNCTIONS - 1)] - global CIS chain followed
- *					by per-function CIS chain
- *	    sp->cis[CS_GLOBAL_CIS] - global CIS chain
- */
-#define	CS_MAX_CIS	(CIS_MAX_FUNCTIONS + 1)
-#define	CS_GLOBAL_CIS	CIS_MAX_FUNCTIONS
-
-/*
- * CS_SS_CLIENT_HANDLE is a special client handle that Socket Services gets
- *	when it registers with RegisterClient.
- */
-#define	CS_SS_CLIENT_HANDLE	0x00000000
-
-/*
- * Client handle, socket number, function number and socket pointer
- *	macros. The client handle encoding is private to Card Services,
- *	and external modules should not use these macros to manipulate
- *	client handles.
- *
- *	The encoding of the client handle is:
- *
- *		xxxxxfff | xsssssss | cccccccc | cccccccc
- *
- *	f - function number bit
- *	s - socket number bit
- *	c - client number bit
- *	x - don't care bits
- */
-#define	CLIENT_HANDLE_IS_SS(ch)		(!GET_CLIENT_MINOR((ch)))
-#define	CS_MAX_SOCKETS_MASK		(PCMCIA_MAX_SOCKETS - 1)
-#define	CS_MAX_FUNCTIONS_MASK		(CIS_MAX_FUNCTIONS - 1)
-#define	CS_MAX_CLIENTS_MASK		0x0ffff
-#define	CS_MAX_CLIENTS			(CS_MAX_CLIENTS_MASK - 2)
-#define	MAKE_CLIENT_HANDLE(s, f, c)	((((f)&CS_MAX_FUNCTIONS_MASK)<<24) | \
-					    (((s)&CS_MAX_SOCKETS_MASK)<<16) | \
-					    ((c)&CS_MAX_CLIENTS_MASK))
-#define	GET_CLIENT_SOCKET(ch)		(((ch)>>16)&CS_MAX_SOCKETS_MASK)
-#define	GET_CLIENT_FUNCTION(ch)		(((ch)>>24)&CS_MAX_FUNCTIONS_MASK)
-#define	GET_CLIENT_MINOR(ch)		((ch)&CS_MAX_CLIENTS_MASK)
-
-/*
- * Socket number macros. These are used by Socket Services, CSI
- *	drivers and the "super-client" driver to specify which
- *	socket and function number on that socket they wish to
- *	manipulate. This socket number encoding is typically passed
- *	to various Card Services functions by these drivers.
- *
- *	The encoding of the socket number is:
- *
- *		xxxxxxxx | xxxxgfff | xxxxxxxx | xsssssss
- *
- *	g - global CIS bit
- *	f - function number bit
- *	s - socket number bit
- *	x - don't care bits
- */
-#define	CS_GET_SOCKET_NUMBER(s)		((s)&CS_MAX_SOCKETS_MASK)
-#define	CS_GET_FUNCTION_NUMBER(s)	(((s)>>16)&(CS_MAX_FUNCTIONS_MASK | \
-							CIS_MAX_FUNCTIONS))
-#define	CS_SET_SOCKET_NUMBER(s)		((s)&CS_MAX_SOCKETS_MASK)
-#define	CS_SET_FUNCTION_NUMBER(f)	(((f)&(CS_MAX_FUNCTIONS_MASK | \
-						CIS_MAX_FUNCTIONS))<<16)
-#define	CS_MAKE_SOCKET_NUMBER(s, f)	(CS_SET_SOCKET_NUMBER(s) | \
-						CS_SET_FUNCTION_NUMBER(f))
-
-/*
- * DIP2SOCKET_NUM(dip) - this macro gets the PCM_DEV_SOCKET property from
- *	the passed dip.  If the property can't be found, then the default
- *	value of cs_globals.max_socket_num is returned.
- */
-#define	DIP2SOCKET_NUM(dip)		ddi_getprop(DDI_DEV_T_NONE, dip,\
-						(DDI_PROP_CANSLEEP |	\
-							DDI_PROP_NOTPROM), \
-						PCM_DEV_SOCKET,		\
-						cs_globals.max_socket_num)
-
-/*
- * Range checking macros
- *
- * CHECK_SOCKET_NUM(socket_number, max_sockets) returns 1 if
- *	socket_number is in range
- */
-#define	CHECK_SOCKET_NUM(sn, ms)	(((sn) >= (ms))?0:1)
-
-/*
- * window macros
- *
- * These all expect that the window has been validated as a valid
- *	window (i.e. CW_WINDOW_VALID is set in window state)
- *
- * Note that WINDOW_FOR_SOCKET expects a socket mask for the wsm
- *	parameter (this is a socket_enum_t type, and NOT just a
- *	plain old uint32_t)
- */
-#define	WINDOW_FOR_SOCKET(wsm, sn)	((wsm)[sn/PR_WORDSIZE] & \
-						(1 << ((sn) & PR_MASK)))
-#define	WINDOW_AVAILABLE_FOR_MEM(cwp)	(!(cwp->state & CW_WIN_IN_USE))
-#define	WINDOW_AVAILABLE_FOR_IO(cwp)	\
-		(!(cwp->state & (CW_CIS | CW_MEM | CW_ALLOCATED)))
-
-/*
- * IO Base and NumPorts address frobnitz macros
- */
-#define	IOADDR_FROBNITZ(Base, IOAddrLines)	(Base&((1<<IOAddrLines)-1))
-#define	IONUMPORTS_FROBNITZ(np)			(((np)&1)?((np)+1):(np))
-
-/*
- * Structure that contains offsets to the card's configuration registers
- *	as well as copies of the data written to them in RequestConfiguration.
- *	We use an offset per register approach since not all cards have
- *	all registers implemented, and by specifying a NULL register offset,
- *	we know not to try to access that register.
- */
-typedef struct config_regs_t {
-	cfg_regs_t	cor;		/* Configuration Option Register */
-	uint32_t	cor_p;
-	cfg_regs_t	ccsr;		/* Configuration and Status Register */
-	uint32_t	ccsr_p;
-	cfg_regs_t	prr;		/* Pin Replacement Register */
-	uint32_t	prr_p;
-	cfg_regs_t	scr;		/* Socket and Copy Register */
-	uint32_t	scr_p;
-	cfg_regs_t	exstat;		/* Extended Status Register */
-	uint32_t	exstat_p;
-	cfg_regs_t	iobase0;	/* IO Base 0 Register */
-	uint32_t	iobase0_p;
-	cfg_regs_t	iobase1;	/* IO Base 1 Register */
-	uint32_t	iobase1_p;
-	cfg_regs_t	iobase2;	/* IO Base 2 Register */
-	uint32_t	iobase2_p;
-	cfg_regs_t	iobase3;	/* IO Base 3 Register */
-	uint32_t	iobase3_p;
-	cfg_regs_t	iolimit;	/* IO Limit Register */
-	uint32_t	iolimit_p;
-} config_regs_t;
-
-/*
- * Macro to make calling the client's event handler look like a function.
- */
-#define	CLIENT_EVENT_CALLBACK(cp, event, pri)		\
-	    (cp)->event_callback_handler(event, pri,	\
-			&(cp)->event_callback_args)
-
-/*
- * Macro to return event in PRR - this also clears the changed bit if
- *	the event occured.
- */
-#define	PRR_EVENT(prrx, pe, ps, ce, re)	\
-	if (prrx & pe) {		\
-	    if (prrx & ps)		\
-		(re) |= ce;		\
-	    prrx &= ~pe;		\
-	    prrx |= ps;			\
-	}
-
-/*
- * io_alloc_t struct used to keep track of a client's IO window allocation
- */
-typedef struct io_alloc_t {
-	uint32_t	Window1;	/* allocated IO window no. for set #1 */
-	baseaddru_t	BasePort1;	/* 1st IO range base address or port */
-	uint32_t	NumPorts1;	/* 1st IO range no. contiguous ports */
-	uint32_t	Attributes1;	/* 1st IO range attributes */
-	uint32_t	Window2;	/* allocated IO window no. for set #2 */
-	baseaddru_t	BasePort2;	/* s2nd IO range base address or port */
-	uint32_t	NumPorts2;	/* 2nd IO range no. contiguous ports */
-	uint32_t	Attributes2;	/* second IO range attributes */
-	uint32_t	IOAddrLines;	/* number of IO address lines decoded */
-} io_alloc_t;
-
-/*
- * irq_alloc_t structure used to keep track of a client's IRQ allocation
- */
-typedef struct irq_alloc_t {
-	uint32_t	Attributes;	/* IRQ attribute flags */
-	uint32_t	irq;		/* assigned IRQ number */
-	uint32_t	handler_id;	/* IRQ handler ID for this IRQ */
-	f_t		*irq_handler;
-	void		*irq_handler_arg1;
-	void		*irq_handler_arg2;
-} irq_alloc_t;
-
-/*
- * The client data structure
- */
-typedef struct client_t {
-	client_handle_t	client_handle;	/* this client's client handle */
-	unsigned	flags;		/* client flags */
-	/* resource control */
-	uint32_t	memwin_count;	/* number of mem windows allocated */
-	io_alloc_t	io_alloc;	/* IO resource allocations */
-	irq_alloc_t	irq_alloc;	/* IRQ resource allocations */
-	/* event support */
-	uint32_t	event_mask;	/* client event mask */
-	uint32_t	global_mask;	/* client global event mask */
-	uint32_t	events;		/* current events pending */
-	uint32_t	pending_events;	/* events pending in RegisterClient */
-	csfunction_t	*event_callback_handler;
-	event_callback_args_t	event_callback_args;
-	/* config registers support */
-	config_regs_t	config_regs;	/* pointers to config registers */
-	uint32_t	config_regs_offset; /* offset from start of AM */
-	unsigned	pin;		/* valid bits in PRR */
-	uint32_t	present;	/* which config registers present */
-	/* DDI support */
-	dev_info_t	*dip;		/* this client's dip */
-	char		*driver_name;	/* client's driver name */
-	int32_t		instance;	/* client's driver instance */
-	/* list control */
-	struct client_t	*next;		/* next client pointer */
-	struct client_t	*prev;		/* previous client pointer */
-} client_t;
-
-/*
- * Flags for client structure - note that we share the client_t->flags
- *	member with the definitions in cs.h that are used by the
- *	RegisterClient function.
- *
- * We can start our flags from 0x00001000 and on up.
- */
-#define	REQ_CONFIGURATION_DONE	0x00001000	/* RequestConfiguration done */
-#define	REQ_SOCKET_MASK_DONE	0x00002000	/* RequestSocketMask done */
-#define	REQ_IO_DONE		0x00004000	/* RequestIO done */
-#define	REQ_IRQ_DONE		0x00008000	/* RequestIRQ done */
-#define	CLIENT_SUPER_CLIENT	0x00010000	/* "super-client" client */
-#define	CLIENT_CSI_CLIENT	0x00020000	/* CSI client */
-#define	CLIENT_CARD_INSERTED	0x00100000	/* current card for client */
-#define	CLIENT_SENT_INSERTION	0x00200000	/* send CARD_INSERTION */
-#define	CLIENT_MTD_IN_PROGRESS	0x01000000	/* MTD op in progress */
-#define	CLIENT_IO_ALLOCATED	0x02000000	/* IO resources allocated */
-#define	CLIENT_IRQ_ALLOCATED	0x04000000	/* IRQ resources allocated */
-#define	CLIENT_WIN_ALLOCATED	0x08000000	/* window resources allocated */
-
-#ifdef	USE_IOMMAP_WINDOW
-/*
- * io_mmap_window_t structure that describes the memory-mapped IO
- *	window on this socket
- */
-typedef struct io_mmap_window_t {
-	uint32_t		flags;	/* window flags */
-	uint32_t		number;	/* IO window number */
-	uint32_t		size;	/* size of mapped IO window */
-	ddi_acc_handle_t	handle;	/* window mapped base address */
-	uint32_t		count;	/* referance count */
-} io_mmap_window_t;
-#endif	/* USE_IOMMAP_WINDOW */
-
-/*
- * cis_info_t structure used to hold per-socket CIS information
- */
-typedef struct cis_info_t {
-	uint32_t	flags;		/* CIS-specific flags */
-	cistpl_t	*cis;		/* CIS linked lists */
-	uint32_t	nchains;	/* number of tuple chains in CIS */
-	uint32_t	ntuples;	/* number of tuples in CIS */
-} cis_info_t;
-
-/*
- * cs_adapter_t structure used to hold per-socket
- *	adapter-specific info
- */
-typedef struct cs_adapter_t {
-	uint32_t	flags;		/* adapter flags */
-	char		name[MODMAXNAMELEN]; /* adapter module name */
-	uint32_t	major;		/* adapter major number */
-	uint32_t	minor;		/* adapter minor number */
-	uint32_t	instance;	/* instance number of this adapter */
-	uint32_t	number;		/* canonical adapter number */
-	uint32_t	num_sockets;	/* # sockets on this adapter */
-	uint32_t	first_socket;	/* first socket # on this adapter */
-} cs_adapter_t;
-
-/*
- * The per-socket structure.
- */
-typedef struct cs_socket_t {
-	unsigned	socket_num;	/* socket number */
-	uint32_t	flags;		/* socket flags */
-	uint32_t	init_state;	/* cs_init state */
-	cs_adapter_t	adapter;	/* adapter info */
-	/* socket thread control and status */
-	kthread_t	*event_thread;	/* per-socket work thread */
-	uint32_t	thread_state;	/* socket thread state flags */
-	kmutex_t	lock;		/* protects events and clients */
-	kcondvar_t	thread_cv;	/* event handling synchronization */
-	kcondvar_t	caller_cv;	/* event handling synchronization */
-	kcondvar_t	reset_cv;	/* for use after card RESET */
-	uint32_t	events;		/* socket events */
-	uint32_t	event_mask;	/* socket event mask */
-	ddi_softintr_t	softint_id;	/* soft interrupt handler ID */
-	timeout_id_t	rdybsy_tmo_id;	/* timer ID for READY/BUSY timer */
-	ddi_iblock_cookie_t	*iblk;	/* event iblk cookie */
-	ddi_idevice_cookie_t	*idev;	/* event idev cookie */
-	callb_cpr_t	cprinfo_cs;	/* CPR cookie for cs_event_thread */
-	callb_cpr_t	cprinfo_ss;	/* CPR cookie for cs_ss_thread */
-	/* client management */
-	client_t	*client_list;	/* clients on this socket */
-	unsigned	next_cl_minor;	/* next available client minor num */
-	kmutex_t	client_lock;	/* protects client list */
-	uint32_t	num_clients;	/* number of clients on this socket */
-	/* CIS support */
-	uint32_t	cis_win_num;	/* CIS window number */
-	unsigned	cis_win_size;	/* CIS window size */
-	uint32_t	cis_flags;
-	uint32_t	nfuncs;		/* number of functions */
-	cis_info_t	cis[CS_MAX_CIS]; /* CIS information */
-	kmutex_t	cis_lock;	/* protects CIS */
-#ifdef	USE_IOMMAP_WINDOW
-	/* memory mapped IO window support */
-	io_mmap_window_t *io_mmap_window;
-#endif	/* USE_IOMMAP_WINDOW */
-	/* Socket Services work thread control and status */
-	kthread_t	*ss_thread;	/* SS work thread */
-	uint32_t	ss_thread_state; /* SS work thread state */
-	kcondvar_t	ss_thread_cv;	/* SS work thread synchronization */
-	kcondvar_t	ss_caller_cv;	/* SS work thread synchronization */
-	kmutex_t	ss_thread_lock;	/* protects SS work thread state */
-	struct cs_socket_t	*next;	/* next socket in list */
-} cs_socket_t;
-
-/*
- * cs_socket_t->flags flags
- */
-#define	SOCKET_CARD_INSERTED		0x00000001	/* card is inserted */
-#define	SOCKET_IS_IO			0x00000002	/* socket in IO mode */
-#define	SOCKET_UNLOAD_MODULE		0x00000004	/* want to unload CS */
-#define	SOCKET_NEEDS_THREAD		0x00000008	/* wake event thread */
-#define	SOCKET_IS_VALID			0x00000020	/* socket OK to use */
-
-/*
- * cs_socket_t->thread_state and cs_socket_t->ss_thread_state flags
- */
-
-/* generic for all threads */
-#define	SOCKET_THREAD_EXIT		0x00000001	/* exit event thread */
-
-/* only used for per-socket event thread */
-#define	SOCKET_WAIT_FOR_READY		0x00001000	/* waiting for READY */
-#define	SOCKET_RESET_TIMER		0x00002000	/* RESET timer */
-#define	SOCKET_WAIT_SYNC		0x00004000	/* SYNC */
-
-/* only used for Socket Services work thread */
-#define	SOCKET_THREAD_CSCISInit		0x00100000	/* call CSCISInit */
-
-/*
- * cs_socket_t->cis_flags and cs_socket_t->cis_info_t->flags flags
- */
-#define	CW_VALID_CIS			0x00000001	/* valid CIS */
-#define	CW_MULTI_FUNCTION_CIS		0x00000002	/* multifunction card */
-#define	CW_LONGLINK_A_FOUND		0x00000004	/* CISTPL_LONGLINK_A */
-#define	CW_LONGLINK_C_FOUND		0x00000008	/* CISTP_LONGLINK_C */
-#define	CW_LONGLINK_MFC_FOUND		0x00000010	/* LONGLINK_MFC */
-#define	CW_CHECK_LINKTARGET		0x00000020	/* check linktarget */
-#define	CW_RET_ON_LINKTARGET_ERROR	0x00000040	/* linktarget invalid */
-#define	CW_CHECK_PRIMARY_CHAIN		0x00000080	/* check for primary */
-							/* chain tuples */
-
-/*
- * CW_LONGLINK_FOUND - a combination of the various CW_LONGLINK_XXX_FOUND
- *			flags used to make the code less dense.
- */
-#define	CW_LONGLINK_FOUND		(CW_LONGLINK_A_FOUND |	\
-					CW_LONGLINK_C_FOUND |	\
-					CW_LONGLINK_MFC_FOUND)
-
-/*
- * macro to test for a valid CIS window on a socket
- */
-#define	SOCKET_HAS_CIS_WINDOW(sp)	(sp->cis_win_num != PCMCIA_MAX_WINDOWS)
-
-/*
- * cs_socket_t->init_state flags - these flags are used to keep track of what
- *	was allocated in cs_init so that things can be deallocated properly
- *	in cs_deinit.
- */
-#define	SOCKET_INIT_STATE_MUTEX		0x00000001	/* mutexii are OK */
-#define	SOCKET_INIT_STATE_CV		0x00000002	/* cvii are OK */
-#define	SOCKET_INIT_STATE_THREAD	0x00000004	/* thread OK */
-#define	SOCKET_INIT_STATE_READY		0x00000008	/* socket OK */
-#define	SOCKET_INIT_STATE_SS_THREAD	0x00000010	/* SS thread OK */
-/*
- * While this next flag doesn't really describe a per-socket resource,
- *	we still set it for each socket.  When the soft interrupt handler
- *	finally gets removed in cs_deinit, this flag will get cleared.
- *	The value of this flag should follow the previous SOCKET_INIT
- *	flag values.
- */
-#define	SOCKET_INIT_STATE_SOFTINTR	0x00000020	/* softintr handler */
-
-/*
- * Macro to create a socket event thread.
- */
-#define	CS_THREAD_PRIORITY		(v.v_maxsyspri - 4)
-#define	CREATE_SOCKET_EVENT_THREAD(eh, csp)			\
-	thread_create(NULL, 0, eh, (void *)csp,			\
-	0, &p0, TS_RUN, CS_THREAD_PRIORITY)
-
-/*
- * The per-window structure.
- */
-typedef struct cs_window_t {
-	uint32_t	window_num;	/* window number */
-	window_handle_t	window_handle;	/* unique window handle */
-	client_handle_t	client_handle;	/* owner of this window */
-	unsigned	socket_num;	/* socket number */
-	unsigned	state;		/* window state flags */
-	struct cs_window_t	*next;	/* next window in list */
-} cs_window_t;
-
-/*
- * Window structure state flags - if none of the bits in the
- *	CW_WIN_IN_USE mask are set AND if CW_WINDOW_VALID is set,
- *	it means that this window is available and not being used
- *	by anyone.
- * Setting the CW_ALLOCATED will prevent the window from being found
- *	as an available window for memory or IO; since memory windows
- *	are not shared between clients, RequestWindow will always set
- *	the CW_ALLOCATED flag when it has assigned a memory window to
- *	a client.  Since we can sometimes share IO windows, RequestIO
- *	will only set the CW_ALLOCATED flag if it doesn't want the IO
- *	window to be used by other calls to RequestIO.
- * When CW_WINDOW_VALID is set, it means that this is a valid window
- *	that has been added by the framework and can be used. If this
- *	bit is not set, this window can not be used at all.
- */
-#define	CW_ALLOCATED	0x00000001	/* window is allocated  */
-#define	CW_CIS		0x00000002	/* window being used as CIS window */
-#define	CW_MEM		0x00000004	/* window being used as mem window */
-#define	CW_IO		0x00000008	/* window being used as IO window */
-#define	CW_WIN_IN_USE	0x0000ffff	/* window in use mask */
-#define	CW_WINDOW_VALID	0x00010000	/* window is valid */
-
-/*
- * window handle defines - the WINDOW_HANDLE_MASK implies the maximum number
- *	of windows allowed
- */
-#define	WINDOW_HANDLE_MAGIC	0x574d0000
-#define	WINDOW_HANDLE_MASK	0x0000ffff
-#define	GET_WINDOW_NUMBER(wh)	((wh) & WINDOW_HANDLE_MASK)
-#define	GET_WINDOW_MAGIC(wh)	((wh) & ~WINDOW_HANDLE_MASK)
-
-/*
- * The client type structures, used to sequence events to clients on a
- *	socket. The "type" flags are the same as are used for the
- *	RegisterClient function.
- */
-typedef struct client_types_t {
-	uint32_t		type;
-	uint32_t		order;
-	struct client_types_t	*next;
-} client_types_t;
-
-/*
- * Flags that specify the order of client event notifications for the
- *	client_types_t structure.
- */
-#define	CLIENT_EVENTS_LIFO	0x00000001
-#define	CLIENT_EVENTS_FIFO	0x00000002
-
-/*
- * This is a structure that CS uses to keep track of items that are global
- *	to all functions in the module.
- */
-typedef struct cs_globals_t {
-	cs_socket_t	*sp;		/* head of socket list */
-	cs_window_t	*cw;		/* head of window list */
-	kmutex_t	global_lock;	/* protects this struct */
-	kmutex_t	window_lock;	/* protects cs_windows */
-	ddi_softintr_t	softint_id;	/* soft interrupt handler id */
-	timeout_id_t	sotfint_tmo;	/* soft interrupt handler timeout id */
-	uint32_t	init_state;	/* flags set in cs_init */
-	uint32_t	flags;		/* general global flags */
-	uint32_t	max_socket_num;	/* highest socket number plus one */
-	uint32_t	num_sockets;	/* total number of sockets */
-	uint32_t	num_windows;	/* total number of windows */
-	struct sclient_list_t	*sclient_list;
-} cs_globals_t;
-
-/*
- * Flags for cs_globals_t->init_state
- */
-#define	GLOBAL_INIT_STATE_SOFTINTR	0x00010000	/* softintr handler */
-#define	GLOBAL_INIT_STATE_MUTEX		0x00020000	/* global mutex init */
-#define	GLOBAL_INIT_STATE_NO_CLIENTS	0x00040000	/* no new clients */
-#define	GLOBAL_INIT_STATE_UNLOADING	0x00080000	/* cs_deinit running */
-#define	GLOBAL_INIT_STATE_SS_READY	0x00100000	/* SS ready for */
-							/* callbacks */
-/*
- * Flags for cs_globals_t->flags
- */
-#define	GLOBAL_SUPER_CLIENT_REGISTERED	0x00000001	/* "super-client" reg */
-#define	GLOBAL_IN_SOFTINTR		0x00000002	/* in soft int code */
-
-/*
- * sclient_reg_t struct for RegisterClient when a "super-client" is
- *	registering.
- * This structure is actually hung off of the client_reg_t.private
- *	structure member.  Since we don't make public how to write
- *	a "super-client", the actual structure that the client uses
- *	is defined in this private header file.
- */
-typedef struct sclient_reg_t {
-	uint32_t		max_socket_num;
-	uint32_t		num_sockets;
-	uint32_t		num_windows;
-	uint32_t		num_clients;
-	struct sclient_list_t {
-		client_handle_t	client_handle;
-		uint32_t	error;
-	} **sclient_list;
-} sclient_reg_t;
-
-/*
- * structure for event text used for cs_ss_event_text
- */
-typedef struct cs_ss_event_text_t {
-	event_t		ss_event;	/* SS event code */
-	event_t		cs_event;	/* CS event code */
-	char		*text;
-} cs_ss_event_text_t;
-
-/*
- * Flags for cs_read_event_status
- */
-#define	CS_RES_IGNORE_NO_CARD		0x0001	/* don't check for card */
-
-/*
- * cs_csfunc2text_strings_t structure used internally in Error2Text
- */
-typedef struct cs_csfunc2text_strings_t {
-	uint32_t	item;
-	char		*text;
-} cs_csfunc2text_strings_t;
-
-/*
- * Flags for Error2Text - not used by clients; the struct is defined
- *	in the cs.h header file.
- */
-#define	CSFUN2TEXT_FUNCTION	0x0001	/* return text of CS function code */
-#define	CSFUN2TEXT_RETURN	0x0002	/* return text of CS return code */
-
-/*
- * Macros to walk the local linked CIS list.
- *
- * These macros can take any valid local list tuple pointer.  They return
- *	another tuple pointer or NULL if they fail.
- */
-#define	GET_NEXT_TUPLE(tp, f)		CIS_PARSER(CISP_CIS_GET_LTUPLE, tp,  \
-						NULL, GET_NEXT_LTUPLEF |     \
-						(f & ~CIS_GET_LTUPLE_OPMASK))
-#define	GET_PREV_TUPLE(tp, f)		CIS_PARSER(CISP_CIS_GET_LTUPLE, tp,  \
-						NULL, GET_PREV_LTUPLEF |     \
-						(f & ~CIS_GET_LTUPLE_OPMASK))
-#define	GET_FIRST_LTUPLE(tp, f)		CIS_PARSER(CISP_CIS_GET_LTUPLE, tp,   \
-						NULL, GET_FIRST_LTUPLEF |     \
-						(f & ~CIS_GET_LTUPLE_OPMASK))
-#define	GET_LAST_LTUPLE(tp, f)		CIS_PARSER(CISP_CIS_GET_LTUPLE, tp,   \
-						NULL, GET_LAST_LTUPLEF |      \
-						(f & ~CIS_GET_LTUPLE_OPMASK))
-#define	FIND_LTUPLE_FWD(tp, tu, f)	CIS_PARSER(CISP_CIS_GET_LTUPLE, tp,   \
-						tu, FIND_LTUPLE_FWDF |        \
-						(f & ~CIS_GET_LTUPLE_OPMASK))
-#define	FIND_LTUPLE_BACK(tp, tu, f)	CIS_PARSER(CISP_CIS_GET_LTUPLE, tp,   \
-						tu, FIND_LTUPLE_BACKF |       \
-						(f & ~CIS_GET_LTUPLE_OPMASK))
-#define	FIND_NEXT_LTUPLE(tp, tu, f)	CIS_PARSER(CISP_CIS_GET_LTUPLE, tp,   \
-						tu, FIND_NEXT_LTUPLEF |       \
-						(f & ~CIS_GET_LTUPLE_OPMASK))
-#define	FIND_PREV_LTUPLE(tp, tu, f)	CIS_PARSER(CISP_CIS_GET_LTUPLE, tp,   \
-						tu, FIND_PREV_LTUPLEF |       \
-						(f & ~CIS_GET_LTUPLE_OPMASK))
-#define	FIND_FIRST_LTUPLE(tp, tu, f)	FIND_LTUPLE_FWD(GET_FIRST_LTUPLE(tp,  \
-								f), tu, f)
-
-
-/*
- * Card Services hooks and general nexus prototypes
- */
-int	 cs_init(void);
-uint32_t cs_event(event_t, uint32_t, uint32_t);
-int	 pcmcia_set_em_handler(int (*handler)(), caddr_t events,
-	    int elen, uint32_t id, void **cs, void **ss);
-
-extern csfunction_t	*cs_socket_services;
-
-
-#ifdef	__cplusplus
-}
-#endif
-
-#endif	/* _CS_PRIV_H */
