--- old/usr/src/uts/common/pcmcia/cis/cis_params.c	2014-11-12 17:44:40.719443557 +0100
+++ /dev/null	2014-11-12 17:44:40.000000000 +0100
@@ -1,236 +0,0 @@
-/*
- * CDDL HEADER START
- *
- * The contents of this file are subject to the terms of the
- * Common Development and Distribution License, Version 1.0 only
- * (the "License").  You may not use this file except in compliance
- * with the License.
- *
- * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
- * or http://www.opensolaris.org/os/licensing.
- * See the License for the specific language governing permissions
- * and limitations under the License.
- *
- * When distributing Covered Code, include this CDDL HEADER in each
- * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
- * If applicable, add the following below this CDDL HEADER, with the
- * fields enclosed by brackets "[]" replaced with your own identifying
- * information: Portions Copyright [yyyy] [name of copyright owner]
- *
- * CDDL HEADER END
- */
-/*
- * Copyright (c) 1995-1999 by Sun Microsystems, Inc.
- * All rights reserved.
- */
-
-#pragma ident	"%Z%%M%	%I%	%E% SMI"
-
-#include <sys/types.h>
-#include <sys/systm.h>
-#include <sys/user.h>
-#include <sys/buf.h>
-#include <sys/file.h>
-#include <sys/uio.h>
-#include <sys/conf.h>
-#include <sys/stat.h>
-#include <sys/autoconf.h>
-#include <sys/vtoc.h>
-#include <sys/dkio.h>
-#include <sys/ddi.h>
-#include <sys/sunddi.h>
-#include <sys/ddi_impldefs.h>
-#include <sys/kstat.h>
-#include <sys/kmem.h>
-#include <sys/modctl.h>
-#include <sys/kobj.h>
-
-#include <sys/pctypes.h>
-#include <pcmcia/sys/cs_types.h>
-#include <pcmcia/sys/cis.h>
-#include <pcmcia/sys/cis_handlers.h>
-
-/*
- *
- * The following speed tables are used by cistpl_devspeed() to generate
- *	device speeds from tuple data.
- *
- * Define the device speed table.  For a description of this table's contents,
- *	see PCMCIA Release 2.01 Card Metaformat pg. 5-14 table 5-12.
- *
- * All times in this table are in nS.
- */
-uint32_t cistpl_devspeed_table[CISTPL_DEVSPEED_MAX_TBL] = {
-    0,		/* 0x00 - DSPEED_NULL */
-    250,	/* 0x01 - DSPEED_250NS */
-    200,	/* 0x02 - DSPEED_200NS */
-    150,	/* 0x03 - DSPEED_150NS */
-    100,	/* 0x04 - DSPEED_100NS */
-    0,		/* 0x05 - reserved */
-    0,		/* 0x06 - reserved */
-    0		/* 0x07 - use extended speed byte */
-};
-
-/*
- * Define the power-of-10 table.
- */
-uint32_t cistpl_exspeed_tenfac[] = {
-    1,		/* 10^0 */
-    10,		/* 10^1 */
-    100,	/* 10^2 */
-    1000,	/* 10^3 */
-    10000,	/* 10^4 */
-    100000,	/* 10^5 */
-    1000000,	/* 10^6 */
-    10000000	/* 10^7	 */
-};
-
-/*
- * The extended device speed code mantissa table.
- *
- * This table is described in PCMCIA Release 2.01 Card Metaformat
- *	pg. 5-15 table 5-13.
- *
- * The description of this table uses non-integer values.  We multiply
- *	everything by 10 before it goes into the table, and the code
- *	will divide by 10 after it calculates the device speed.
- */
-uint32_t cistpl_devspeed_man[CISTPL_DEVSPEED_MAX_MAN] = {
-    0,		/* no units */
-    10,		/* no units */
-    12,		/* no units */
-    13,		/* no units */
-    15,		/* no units */
-    20,		/* no units */
-    25,		/* no units */
-    30,		/* no units */
-    35,		/* no units */
-    40,		/* no units */
-    45,		/* no units */
-    50,		/* no units */
-    55,		/* no units */
-    60,		/* no units */
-    70,		/* no units */
-    80,		/* no units */
-};
-
-/*
- * The extended device speed code exponent table.
- *
- * This table is described in PCMCIA Release 2.01 Card Metaformat
- *	pg. 5-15 table 5-13.
- *
- * The description of this table uses various timing units.  This
- *	table contains all times in nS.
- */
-uint32_t cistpl_devspeed_exp[CISTPL_DEVSPEED_MAX_EXP] = {
-    1,		/* 1 nS */
-    10,		/* 10 nS */
-    100,	/* 100 nS */
-    1000,	/* 1000 nS */
-    10000,	/* 10000 nS */
-    100000,	/* 100000 nS */
-    1000000,	/* 1000000 nS */
-    10000000	/* 10000000 nS */
-};
-
-/*
- * The power description mantissa table.
- *
- * This table is described in PCMCIA Release 2.01 Card Metaformat
- *	pg. 5-28 table 5-32.
- *
- * The description of this table uses non-integer values.  We multiply
- *	everything by 10 before it goes into the table, and the code
- *	will divide by 10 after it calculates the device power.
- */
-uint32_t cistpl_pd_man[] = {
-    10,		/* no units */
-    12,		/* no units */
-    13,		/* no units */
-    15,		/* no units */
-    20,		/* no units */
-    25,		/* no units */
-    30,		/* no units */
-    35,		/* no units */
-    40,		/* no units */
-    45,		/* no units */
-    50,		/* no units */
-    55,		/* no units */
-    60,		/* no units */
-    70,		/* no units */
-    80,		/* no units */
-    90,		/* no units */
-};
-
-/*
- * The power description exponent table.
- *
- * This table is described in PCMCIA Release 2.01 Card Metaformat
- *	pg. 5-28 table 5-32.
- *
- * The description of this table uses various voltage and current units.
- *	This table contains all currents in nanoAMPS and all voltages
- *	in microVOLTS.
- *
- * Note if you're doing a current table lookup, you need to multiply
- *	the lookup value by ten.
- */
-uint32_t cistpl_pd_exp[] = {
-    10,		/* 10 microVOLTS, 100 nanoAMPS */
-    100,	/* 100 microVOLTS, 1000 nanoAMPS */
-    1000,	/* 1000 microVOLTS, 10000 nanoAMPS */
-    10000,	/* 10000 microVOLTS, 100000 nanoAMPS */
-    100000,	/* 100000 microVOLTS, 1000000 nanoAMPS */
-    1000000,	/* 1000000 microVOLTS, 10000000 nanoAMPS */
-    10000000,	/* 10000000 microVOLTS, 100000000 nanoAMPS */
-    100000000	/* 100000000 microVOLTS, 1000000000 nanoAMPS */
-};
-
-/*
- * Fill out the structure pointers.
- */
-cistpl_devspeed_struct_t cistpl_devspeed_struct = {
-	cistpl_devspeed_table,
-	cistpl_exspeed_tenfac,
-	cistpl_devspeed_man,
-	cistpl_devspeed_exp,
-};
-
-cistpl_pd_struct_t cistpl_pd_struct = {
-	cistpl_pd_man,
-	cistpl_pd_exp,
-};
-
-/*
- * Some handy lookup tables that should probably eventually be
- *	done away with.
- *
- * These are used mostly by the CISTPL_CFTABLE_ENTRY tuple handler.
- */
-uint32_t cistpl_cftable_io_size_table[] = {
-	0,
-	1,
-	2,
-	4,
-};
-
-uint32_t cistpl_cftable_shift_table[] = {
-	0,
-	8,
-	16,
-	24,
-};
-
-/*
- * List of tuples in the global CIS to ignore if they show
- *	up in both the global and function-specific CIS lists.
- * This list MUST end with CISTPL_NULL.
- */
-cistpl_ignore_list_t cistpl_ignore_list[] = {
-	CISTPL_FUNCID,
-	CISTPL_FUNCE,
-	CISTPL_CONFIG,
-	CISTPL_CFTABLE_ENTRY,
-	CISTPL_NULL	/* list must end with CISTPL_NULL */
-};
