--- /dev/null	2014-08-13 19:25:24.000000000 +0400
+++ new/usr/src/lib/openssl/libsunw_crypto/pl/aes-586.pl	2014-08-13 19:25:24.134804159 +0400
@@ -0,0 +1,2980 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# Version 4.3.
+#
+# You might fail to appreciate this module performance from the first
+# try. If compared to "vanilla" linux-ia32-icc target, i.e. considered
+# to be *the* best Intel C compiler without -KPIC, performance appears
+# to be virtually identical... But try to re-configure with shared
+# library support... Aha! Intel compiler "suddenly" lags behind by 30%
+# [on P4, more on others]:-) And if compared to position-independent
+# code generated by GNU C, this code performs *more* than *twice* as
+# fast! Yes, all this buzz about PIC means that unlike other hand-
+# coded implementations, this one was explicitly designed to be safe
+# to use even in shared library context... This also means that this
+# code isn't necessarily absolutely fastest "ever," because in order
+# to achieve position independence an extra register has to be
+# off-loaded to stack, which affects the benchmark result.
+#
+# Special note about instruction choice. Do you recall RC4_INT code
+# performing poorly on P4? It might be the time to figure out why.
+# RC4_INT code implies effective address calculations in base+offset*4
+# form. Trouble is that it seems that offset scaling turned to be
+# critical path... At least eliminating scaling resulted in 2.8x RC4
+# performance improvement [as you might recall]. As AES code is hungry
+# for scaling too, I [try to] avoid the latter by favoring off-by-2
+# shifts and masking the result with 0xFF<<2 instead of "boring" 0xFF.
+#
+# As was shown by Dean Gaudet <dean@arctic.org>, the above note turned
+# void. Performance improvement with off-by-2 shifts was observed on
+# intermediate implementation, which was spilling yet another register
+# to stack... Final offset*4 code below runs just a tad faster on P4,
+# but exhibits up to 10% improvement on other cores.
+#
+# Second version is "monolithic" replacement for aes_core.c, which in
+# addition to AES_[de|en]crypt implements private_AES_set_[de|en]cryption_key.
+# This made it possible to implement little-endian variant of the
+# algorithm without modifying the base C code. Motivating factor for
+# the undertaken effort was that it appeared that in tight IA-32
+# register window little-endian flavor could achieve slightly higher
+# Instruction Level Parallelism, and it indeed resulted in up to 15%
+# better performance on most recent µ-archs...
+#
+# Third version adds AES_cbc_encrypt implementation, which resulted in
+# up to 40% performance imrovement of CBC benchmark results. 40% was
+# observed on P4 core, where "overall" imrovement coefficient, i.e. if
+# compared to PIC generated by GCC and in CBC mode, was observed to be
+# as large as 4x:-) CBC performance is virtually identical to ECB now
+# and on some platforms even better, e.g. 17.6 "small" cycles/byte on
+# Opteron, because certain function prologues and epilogues are
+# effectively taken out of the loop...
+#
+# Version 3.2 implements compressed tables and prefetch of these tables
+# in CBC[!] mode. Former means that 3/4 of table references are now
+# misaligned, which unfortunately has negative impact on elder IA-32
+# implementations, Pentium suffered 30% penalty, PIII - 10%.
+#
+# Version 3.3 avoids L1 cache aliasing between stack frame and
+# S-boxes, and 3.4 - L1 cache aliasing even between key schedule. The
+# latter is achieved by copying the key schedule to controlled place in
+# stack. This unfortunately has rather strong impact on small block CBC
+# performance, ~2x deterioration on 16-byte block if compared to 3.3.
+#
+# Version 3.5 checks if there is L1 cache aliasing between user-supplied
+# key schedule and S-boxes and abstains from copying the former if
+# there is no. This allows end-user to consciously retain small block
+# performance by aligning key schedule in specific manner.
+#
+# Version 3.6 compresses Td4 to 256 bytes and prefetches it in ECB.
+#
+# Current ECB performance numbers for 128-bit key in CPU cycles per
+# processed byte [measure commonly used by AES benchmarkers] are:
+#
+#		small footprint		fully unrolled
+# P4		24			22
+# AMD K8	20			19
+# PIII		25			23
+# Pentium	81			78
+#
+# Version 3.7 reimplements outer rounds as "compact." Meaning that
+# first and last rounds reference compact 256 bytes S-box. This means
+# that first round consumes a lot more CPU cycles and that encrypt
+# and decrypt performance becomes asymmetric. Encrypt performance
+# drops by 10-12%, while decrypt - by 20-25%:-( 256 bytes S-box is
+# aggressively pre-fetched.
+#
+# Version 4.0 effectively rolls back to 3.6 and instead implements
+# additional set of functions, _[x86|sse]_AES_[en|de]crypt_compact,
+# which use exclusively 256 byte S-box. These functions are to be
+# called in modes not concealing plain text, such as ECB, or when
+# we're asked to process smaller amount of data [or unconditionally
+# on hyper-threading CPU]. Currently it's called unconditionally from
+# AES_[en|de]crypt, which affects all modes, but CBC. CBC routine
+# still needs to be modified to switch between slower and faster
+# mode when appropriate... But in either case benchmark landscape
+# changes dramatically and below numbers are CPU cycles per processed
+# byte for 128-bit key.
+#
+#		ECB encrypt	ECB decrypt	CBC large chunk
+# P4		56[60]		84[100]		23
+# AMD K8	48[44]		70[79]		18
+# PIII		41[50]		61[91]		24
+# Core 2	32[38]		45[70]		18.5
+# Pentium	120		160		77
+#
+# Version 4.1 switches to compact S-box even in key schedule setup.
+#
+# Version 4.2 prefetches compact S-box in every SSE round or in other
+# words every cache-line is *guaranteed* to be accessed within ~50
+# cycles window. Why just SSE? Because it's needed on hyper-threading
+# CPU! Which is also why it's prefetched with 64 byte stride. Best
+# part is that it has no negative effect on performance:-)
+#
+# Version 4.3 implements switch between compact and non-compact block
+# functions in AES_cbc_encrypt depending on how much data was asked
+# to be processed in one stroke.
+#
+######################################################################
+# Timing attacks are classified in two classes: synchronous when
+# attacker consciously initiates cryptographic operation and collects
+# timing data of various character afterwards, and asynchronous when
+# malicious code is executed on same CPU simultaneously with AES,
+# instruments itself and performs statistical analysis of this data.
+#
+# As far as synchronous attacks go the root to the AES timing
+# vulnerability is twofold. Firstly, of 256 S-box elements at most 160
+# are referred to in single 128-bit block operation. Well, in C
+# implementation with 4 distinct tables it's actually as little as 40
+# references per 256 elements table, but anyway... Secondly, even
+# though S-box elements are clustered into smaller amount of cache-
+# lines, smaller than 160 and even 40, it turned out that for certain
+# plain-text pattern[s] or simply put chosen plain-text and given key
+# few cache-lines remain unaccessed during block operation. Now, if
+# attacker can figure out this access pattern, he can deduct the key
+# [or at least part of it]. The natural way to mitigate this kind of
+# attacks is to minimize the amount of cache-lines in S-box and/or
+# prefetch them to ensure that every one is accessed for more uniform
+# timing. But note that *if* plain-text was concealed in such way that
+# input to block function is distributed *uniformly*, then attack
+# wouldn't apply. Now note that some encryption modes, most notably
+# CBC, do mask the plain-text in this exact way [secure cipher output
+# is distributed uniformly]. Yes, one still might find input that
+# would reveal the information about given key, but if amount of
+# candidate inputs to be tried is larger than amount of possible key
+# combinations then attack becomes infeasible. This is why revised
+# AES_cbc_encrypt "dares" to switch to larger S-box when larger chunk
+# of data is to be processed in one stroke. The current size limit of
+# 512 bytes is chosen to provide same [diminishigly low] probability
+# for cache-line to remain untouched in large chunk operation with
+# large S-box as for single block operation with compact S-box and
+# surely needs more careful consideration...
+#
+# As for asynchronous attacks. There are two flavours: attacker code
+# being interleaved with AES on hyper-threading CPU at *instruction*
+# level, and two processes time sharing single core. As for latter.
+# Two vectors. 1. Given that attacker process has higher priority,
+# yield execution to process performing AES just before timer fires
+# off the scheduler, immediately regain control of CPU and analyze the
+# cache state. For this attack to be efficient attacker would have to
+# effectively slow down the operation by several *orders* of magnitute,
+# by ratio of time slice to duration of handful of AES rounds, which
+# unlikely to remain unnoticed. Not to mention that this also means
+# that he would spend correspondigly more time to collect enough
+# statistical data to mount the attack. It's probably appropriate to
+# say that if adeversary reckons that this attack is beneficial and
+# risks to be noticed, you probably have larger problems having him
+# mere opportunity. In other words suggested code design expects you
+# to preclude/mitigate this attack by overall system security design.
+# 2. Attacker manages to make his code interrupt driven. In order for
+# this kind of attack to be feasible, interrupt rate has to be high
+# enough, again comparable to duration of handful of AES rounds. But
+# is there interrupt source of such rate? Hardly, not even 1Gbps NIC
+# generates interrupts at such raging rate...
+#
+# And now back to the former, hyper-threading CPU or more specifically
+# Intel P4. Recall that asynchronous attack implies that malicious
+# code instruments itself. And naturally instrumentation granularity
+# has be noticeably lower than duration of codepath accessing S-box.
+# Given that all cache-lines are accessed during that time that is.
+# Current implementation accesses *all* cache-lines within ~50 cycles
+# window, which is actually *less* than RDTSC latency on Intel P4!
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],"aes-586.pl",$x86only = $ARGV[$#ARGV] eq "386");
+&static_label("AES_Te");
+&static_label("AES_Td");
+
+$s0="eax";
+$s1="ebx";
+$s2="ecx";
+$s3="edx";
+$key="edi";
+$acc="esi";
+$tbl="ebp";
+
+# stack frame layout in _[x86|sse]_AES_* routines, frame is allocated
+# by caller
+$__ra=&DWP(0,"esp");	# return address
+$__s0=&DWP(4,"esp");	# s0 backing store
+$__s1=&DWP(8,"esp");	# s1 backing store
+$__s2=&DWP(12,"esp");	# s2 backing store
+$__s3=&DWP(16,"esp");	# s3 backing store
+$__key=&DWP(20,"esp");	# pointer to key schedule
+$__end=&DWP(24,"esp");	# pointer to end of key schedule
+$__tbl=&DWP(28,"esp");	# %ebp backing store
+
+# stack frame layout in AES_[en|crypt] routines, which differs from
+# above by 4 and overlaps by %ebp backing store
+$_tbl=&DWP(24,"esp");
+$_esp=&DWP(28,"esp");
+
+sub _data_word() { my $i; while(defined($i=shift)) { &data_word($i,$i); } }
+
+$speed_limit=512;	# chunks smaller than $speed_limit are
+			# processed with compact routine in CBC mode
+$small_footprint=1;	# $small_footprint=1 code is ~5% slower [on
+			# recent µ-archs], but ~5 times smaller!
+			# I favor compact code to minimize cache
+			# contention and in hope to "collect" 5% back
+			# in real-life applications...
+
+$vertical_spin=0;	# shift "verticaly" defaults to 0, because of
+			# its proof-of-concept status...
+# Note that there is no decvert(), as well as last encryption round is
+# performed with "horizontal" shifts. This is because this "vertical"
+# implementation [one which groups shifts on a given $s[i] to form a
+# "column," unlike "horizontal" one, which groups shifts on different
+# $s[i] to form a "row"] is work in progress. It was observed to run
+# few percents faster on Intel cores, but not AMD. On AMD K8 core it's
+# whole 12% slower:-( So we face a trade-off... Shall it be resolved
+# some day? Till then the code is considered experimental and by
+# default remains dormant...
+
+sub encvert()
+{ my ($te,@s) = @_;
+  my $v0 = $acc, $v1 = $key;
+
+	&mov	($v0,$s[3]);				# copy s3
+	&mov	(&DWP(4,"esp"),$s[2]);			# save s2
+	&mov	($v1,$s[0]);				# copy s0
+	&mov	(&DWP(8,"esp"),$s[1]);			# save s1
+
+	&movz	($s[2],&HB($s[0]));
+	&and	($s[0],0xFF);
+	&mov	($s[0],&DWP(0,$te,$s[0],8));		# s0>>0
+	&shr	($v1,16);
+	&mov	($s[3],&DWP(3,$te,$s[2],8));		# s0>>8
+	&movz	($s[1],&HB($v1));
+	&and	($v1,0xFF);
+	&mov	($s[2],&DWP(2,$te,$v1,8));		# s0>>16
+	 &mov	($v1,$v0);
+	&mov	($s[1],&DWP(1,$te,$s[1],8));		# s0>>24
+
+	&and	($v0,0xFF);
+	&xor	($s[3],&DWP(0,$te,$v0,8));		# s3>>0
+	&movz	($v0,&HB($v1));
+	&shr	($v1,16);
+	&xor	($s[2],&DWP(3,$te,$v0,8));		# s3>>8
+	&movz	($v0,&HB($v1));
+	&and	($v1,0xFF);
+	&xor	($s[1],&DWP(2,$te,$v1,8));		# s3>>16
+	 &mov	($v1,&DWP(4,"esp"));			# restore s2
+	&xor	($s[0],&DWP(1,$te,$v0,8));		# s3>>24
+
+	&mov	($v0,$v1);
+	&and	($v1,0xFF);
+	&xor	($s[2],&DWP(0,$te,$v1,8));		# s2>>0
+	&movz	($v1,&HB($v0));
+	&shr	($v0,16);
+	&xor	($s[1],&DWP(3,$te,$v1,8));		# s2>>8
+	&movz	($v1,&HB($v0));
+	&and	($v0,0xFF);
+	&xor	($s[0],&DWP(2,$te,$v0,8));		# s2>>16
+	 &mov	($v0,&DWP(8,"esp"));			# restore s1
+	&xor	($s[3],&DWP(1,$te,$v1,8));		# s2>>24
+
+	&mov	($v1,$v0);
+	&and	($v0,0xFF);
+	&xor	($s[1],&DWP(0,$te,$v0,8));		# s1>>0
+	&movz	($v0,&HB($v1));
+	&shr	($v1,16);
+	&xor	($s[0],&DWP(3,$te,$v0,8));		# s1>>8
+	&movz	($v0,&HB($v1));
+	&and	($v1,0xFF);
+	&xor	($s[3],&DWP(2,$te,$v1,8));		# s1>>16
+	 &mov	($key,$__key);				# reincarnate v1 as key
+	&xor	($s[2],&DWP(1,$te,$v0,8));		# s1>>24
+}
+
+# Another experimental routine, which features "horizontal spin," but
+# eliminates one reference to stack. Strangely enough runs slower...
+sub enchoriz()
+{ my $v0 = $key, $v1 = $acc;
+
+	&movz	($v0,&LB($s0));			#  3, 2, 1, 0*
+	&rotr	($s2,8);			#  8,11,10, 9
+	&mov	($v1,&DWP(0,$te,$v0,8));	#  0
+	&movz	($v0,&HB($s1));			#  7, 6, 5*, 4
+	&rotr	($s3,16);			# 13,12,15,14
+	&xor	($v1,&DWP(3,$te,$v0,8));	#  5
+	&movz	($v0,&HB($s2));			#  8,11,10*, 9
+	&rotr	($s0,16);			#  1, 0, 3, 2
+	&xor	($v1,&DWP(2,$te,$v0,8));	# 10
+	&movz	($v0,&HB($s3));			# 13,12,15*,14
+	&xor	($v1,&DWP(1,$te,$v0,8));	# 15, t[0] collected
+	&mov	($__s0,$v1);			# t[0] saved
+
+	&movz	($v0,&LB($s1));			#  7, 6, 5, 4*
+	&shr	($s1,16);			#  -, -, 7, 6
+	&mov	($v1,&DWP(0,$te,$v0,8));	#  4
+	&movz	($v0,&LB($s3));			# 13,12,15,14*
+	&xor	($v1,&DWP(2,$te,$v0,8));	# 14
+	&movz	($v0,&HB($s0));			#  1, 0, 3*, 2
+	&and	($s3,0xffff0000);		# 13,12, -, -
+	&xor	($v1,&DWP(1,$te,$v0,8));	#  3
+	&movz	($v0,&LB($s2));			#  8,11,10, 9*
+	&or	($s3,$s1);			# 13,12, 7, 6
+	&xor	($v1,&DWP(3,$te,$v0,8));	#  9, t[1] collected
+	&mov	($s1,$v1);			#  s[1]=t[1]
+
+	&movz	($v0,&LB($s0));			#  1, 0, 3, 2*
+	&shr	($s2,16);			#  -, -, 8,11
+	&mov	($v1,&DWP(2,$te,$v0,8));	#  2
+	&movz	($v0,&HB($s3));			# 13,12, 7*, 6
+	&xor	($v1,&DWP(1,$te,$v0,8));	#  7
+	&movz	($v0,&HB($s2));			#  -, -, 8*,11
+	&xor	($v1,&DWP(0,$te,$v0,8));	#  8
+	&mov	($v0,$s3);
+	&shr	($v0,24);			# 13
+	&xor	($v1,&DWP(3,$te,$v0,8));	# 13, t[2] collected
+
+	&movz	($v0,&LB($s2));			#  -, -, 8,11*
+	&shr	($s0,24);			#  1*
+	&mov	($s2,&DWP(1,$te,$v0,8));	# 11
+	&xor	($s2,&DWP(3,$te,$s0,8));	#  1
+	&mov	($s0,$__s0);			# s[0]=t[0]
+	&movz	($v0,&LB($s3));			# 13,12, 7, 6*
+	&shr	($s3,16);			#   ,  ,13,12
+	&xor	($s2,&DWP(2,$te,$v0,8));	#  6
+	&mov	($key,$__key);			# reincarnate v0 as key
+	&and	($s3,0xff);			#   ,  ,13,12*
+	&mov	($s3,&DWP(0,$te,$s3,8));	# 12
+	&xor	($s3,$s2);			# s[2]=t[3] collected
+	&mov	($s2,$v1);			# s[2]=t[2]
+}
+
+# More experimental code... SSE one... Even though this one eliminates
+# *all* references to stack, it's not faster...
+sub sse_encbody()
+{
+	&movz	($acc,&LB("eax"));		#  0
+	&mov	("ecx",&DWP(0,$tbl,$acc,8));	#  0
+	&pshufw	("mm2","mm0",0x0d);		#  7, 6, 3, 2
+	&movz	("edx",&HB("eax"));		#  1
+	&mov	("edx",&DWP(3,$tbl,"edx",8));	#  1
+	&shr	("eax",16);			#  5, 4
+
+	&movz	($acc,&LB("ebx"));		# 10
+	&xor	("ecx",&DWP(2,$tbl,$acc,8));	# 10
+	&pshufw	("mm6","mm4",0x08);		# 13,12, 9, 8
+	&movz	($acc,&HB("ebx"));		# 11
+	&xor	("edx",&DWP(1,$tbl,$acc,8));	# 11
+	&shr	("ebx",16);			# 15,14
+
+	&movz	($acc,&HB("eax"));		#  5
+	&xor	("ecx",&DWP(3,$tbl,$acc,8));	#  5
+	&movq	("mm3",QWP(16,$key));
+	&movz	($acc,&HB("ebx"));		# 15
+	&xor	("ecx",&DWP(1,$tbl,$acc,8));	# 15
+	&movd	("mm0","ecx");			# t[0] collected
+
+	&movz	($acc,&LB("eax"));		#  4
+	&mov	("ecx",&DWP(0,$tbl,$acc,8));	#  4
+	&movd	("eax","mm2");			#  7, 6, 3, 2
+	&movz	($acc,&LB("ebx"));		# 14
+	&xor	("ecx",&DWP(2,$tbl,$acc,8));	# 14
+	&movd	("ebx","mm6");			# 13,12, 9, 8
+
+	&movz	($acc,&HB("eax"));		#  3
+	&xor	("ecx",&DWP(1,$tbl,$acc,8));	#  3
+	&movz	($acc,&HB("ebx"));		#  9
+	&xor	("ecx",&DWP(3,$tbl,$acc,8));	#  9
+	&movd	("mm1","ecx");			# t[1] collected
+
+	&movz	($acc,&LB("eax"));		#  2
+	&mov	("ecx",&DWP(2,$tbl,$acc,8));	#  2
+	&shr	("eax",16);			#  7, 6
+	&punpckldq	("mm0","mm1");		# t[0,1] collected
+	&movz	($acc,&LB("ebx"));		#  8
+	&xor	("ecx",&DWP(0,$tbl,$acc,8));	#  8
+	&shr	("ebx",16);			# 13,12
+
+	&movz	($acc,&HB("eax"));		#  7
+	&xor	("ecx",&DWP(1,$tbl,$acc,8));	#  7
+	&pxor	("mm0","mm3");
+	&movz	("eax",&LB("eax"));		#  6
+	&xor	("edx",&DWP(2,$tbl,"eax",8));	#  6
+	&pshufw	("mm1","mm0",0x08);		#  5, 4, 1, 0
+	&movz	($acc,&HB("ebx"));		# 13
+	&xor	("ecx",&DWP(3,$tbl,$acc,8));	# 13
+	&xor	("ecx",&DWP(24,$key));		# t[2]
+	&movd	("mm4","ecx");			# t[2] collected
+	&movz	("ebx",&LB("ebx"));		# 12
+	&xor	("edx",&DWP(0,$tbl,"ebx",8));	# 12
+	&shr	("ecx",16);
+	&movd	("eax","mm1");			#  5, 4, 1, 0
+	&mov	("ebx",&DWP(28,$key));		# t[3]
+	&xor	("ebx","edx");
+	&movd	("mm5","ebx");			# t[3] collected
+	&and	("ebx",0xffff0000);
+	&or	("ebx","ecx");
+
+	&punpckldq	("mm4","mm5");		# t[2,3] collected
+}
+
+######################################################################
+# "Compact" block function
+######################################################################
+
+sub enccompact()
+{ my $Fn = mov;
+  while ($#_>5) { pop(@_); $Fn=sub{}; }
+  my ($i,$te,@s)=@_;
+  my $tmp = $key;
+  my $out = $i==3?$s[0]:$acc;
+
+	# $Fn is used in first compact round and its purpose is to
+	# void restoration of some values from stack, so that after
+	# 4xenccompact with extra argument $key value is left there...
+	if ($i==3)  {	&$Fn	($key,$__key);			}##%edx
+	else        {	&mov	($out,$s[0]);			}
+			&and	($out,0xFF);
+	if ($i==1)  {	&shr	($s[0],16);			}#%ebx[1]
+	if ($i==2)  {	&shr	($s[0],24);			}#%ecx[2]
+			&movz	($out,&BP(-128,$te,$out,1));
+
+	if ($i==3)  {	$tmp=$s[1];				}##%eax
+			&movz	($tmp,&HB($s[1]));
+			&movz	($tmp,&BP(-128,$te,$tmp,1));
+			&shl	($tmp,8);
+			&xor	($out,$tmp);
+
+	if ($i==3)  {	$tmp=$s[2]; &mov ($s[1],$__s0);		}##%ebx
+	else        {	&mov	($tmp,$s[2]);
+			&shr	($tmp,16);			}
+	if ($i==2)  {	&and	($s[1],0xFF);			}#%edx[2]
+			&and	($tmp,0xFF);
+			&movz	($tmp,&BP(-128,$te,$tmp,1));
+			&shl	($tmp,16);
+			&xor	($out,$tmp);
+
+	if ($i==3)  {	$tmp=$s[3]; &mov ($s[2],$__s1);		}##%ecx
+	elsif($i==2){	&movz	($tmp,&HB($s[3]));		}#%ebx[2]
+	else        {	&mov	($tmp,$s[3]);
+			&shr	($tmp,24);			}
+			&movz	($tmp,&BP(-128,$te,$tmp,1));
+			&shl	($tmp,24);
+			&xor	($out,$tmp);
+	if ($i<2)   {	&mov	(&DWP(4+4*$i,"esp"),$out);	}
+	if ($i==3)  {	&mov	($s[3],$acc);			}
+	&comment();
+}
+
+sub enctransform()
+{ my @s = ($s0,$s1,$s2,$s3);
+  my $i = shift;
+  my $tmp = $tbl;
+  my $r2  = $key ;
+
+	&mov	($acc,$s[$i]);
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
+	&shr	($tmp,7);
+	&lea	($r2,&DWP(0,$s[$i],$s[$i]));
+	&sub	($acc,$tmp);
+	&and	($r2,0xfefefefe);
+	&and	($acc,0x1b1b1b1b);
+	&mov	($tmp,$s[$i]);
+	&xor	($acc,$r2);	# r2
+
+	&xor	($s[$i],$acc);	# r0 ^ r2
+	&rotl	($s[$i],24);
+	&xor	($s[$i],$acc)	# ROTATE(r2^r0,24) ^ r2
+	&rotr	($tmp,16);
+	&xor	($s[$i],$tmp);
+	&rotr	($tmp,8);
+	&xor	($s[$i],$tmp);
+}
+
+&function_begin_B("_x86_AES_encrypt_compact");
+	# note that caller is expected to allocate stack frame for me!
+	&mov	($__key,$key);			# save key
+
+	&xor	($s0,&DWP(0,$key));		# xor with key
+	&xor	($s1,&DWP(4,$key));
+	&xor	($s2,&DWP(8,$key));
+	&xor	($s3,&DWP(12,$key));
+
+	&mov	($acc,&DWP(240,$key));		# load key->rounds
+	&lea	($acc,&DWP(-2,$acc,$acc));
+	&lea	($acc,&DWP(0,$key,$acc,8));
+	&mov	($__end,$acc);			# end of key schedule
+
+	# prefetch Te4
+	&mov	($key,&DWP(0-128,$tbl));
+	&mov	($acc,&DWP(32-128,$tbl));
+	&mov	($key,&DWP(64-128,$tbl));
+	&mov	($acc,&DWP(96-128,$tbl));
+	&mov	($key,&DWP(128-128,$tbl));
+	&mov	($acc,&DWP(160-128,$tbl));
+	&mov	($key,&DWP(192-128,$tbl));
+	&mov	($acc,&DWP(224-128,$tbl));
+
+	&set_label("loop",16);
+
+		&enccompact(0,$tbl,$s0,$s1,$s2,$s3,1);
+		&enccompact(1,$tbl,$s1,$s2,$s3,$s0,1);
+		&enccompact(2,$tbl,$s2,$s3,$s0,$s1,1);
+		&enccompact(3,$tbl,$s3,$s0,$s1,$s2,1);
+		&enctransform(2);
+		&enctransform(3);
+		&enctransform(0);
+		&enctransform(1);
+		&mov 	($key,$__key);
+		&mov	($tbl,$__tbl);
+		&add	($key,16);		# advance rd_key
+		&xor	($s0,&DWP(0,$key));
+		&xor	($s1,&DWP(4,$key));
+		&xor	($s2,&DWP(8,$key));
+		&xor	($s3,&DWP(12,$key));
+
+	&cmp	($key,$__end);
+	&mov	($__key,$key);
+	&jb	(&label("loop"));
+
+	&enccompact(0,$tbl,$s0,$s1,$s2,$s3);
+	&enccompact(1,$tbl,$s1,$s2,$s3,$s0);
+	&enccompact(2,$tbl,$s2,$s3,$s0,$s1);
+	&enccompact(3,$tbl,$s3,$s0,$s1,$s2);
+
+	&xor	($s0,&DWP(16,$key));
+	&xor	($s1,&DWP(20,$key));
+	&xor	($s2,&DWP(24,$key));
+	&xor	($s3,&DWP(28,$key));
+
+	&ret	();
+&function_end_B("_x86_AES_encrypt_compact");
+
+######################################################################
+# "Compact" SSE block function.
+######################################################################
+#
+# Performance is not actually extraordinary in comparison to pure
+# x86 code. In particular encrypt performance is virtually the same.
+# Decrypt performance on the other hand is 15-20% better on newer
+# µ-archs [but we're thankful for *any* improvement here], and ~50%
+# better on PIII:-) And additionally on the pros side this code
+# eliminates redundant references to stack and thus relieves/
+# minimizes the pressure on the memory bus.
+#
+# MMX register layout                           lsb
+# +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+# |          mm4          |          mm0          |
+# +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+# |     s3    |     s2    |     s1    |     s0    |
+# +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+# |15|14|13|12|11|10| 9| 8| 7| 6| 5| 4| 3| 2| 1| 0|
+# +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+#
+# Indexes translate as s[N/4]>>(8*(N%4)), e.g. 5 means s1>>8.
+# In this terms encryption and decryption "compact" permutation
+# matrices can be depicted as following:
+#
+# encryption              lsb	# decryption              lsb
+# +----++----+----+----+----+	# +----++----+----+----+----+
+# | t0 || 15 | 10 |  5 |  0 |	# | t0 ||  7 | 10 | 13 |  0 |
+# +----++----+----+----+----+	# +----++----+----+----+----+
+# | t1 ||  3 | 14 |  9 |  4 |	# | t1 || 11 | 14 |  1 |  4 |
+# +----++----+----+----+----+	# +----++----+----+----+----+
+# | t2 ||  7 |  2 | 13 |  8 |	# | t2 || 15 |  2 |  5 |  8 |
+# +----++----+----+----+----+	# +----++----+----+----+----+
+# | t3 || 11 |  6 |  1 | 12 |	# | t3 ||  3 |  6 |  9 | 12 |
+# +----++----+----+----+----+	# +----++----+----+----+----+
+#
+######################################################################
+# Why not xmm registers? Short answer. It was actually tested and
+# was not any faster, but *contrary*, most notably on Intel CPUs.
+# Longer answer. Main advantage of using mm registers is that movd
+# latency is lower, especially on Intel P4. While arithmetic
+# instructions are twice as many, they can be scheduled every cycle
+# and not every second one when they are operating on xmm register,
+# so that "arithmetic throughput" remains virtually the same. And
+# finally the code can be executed even on elder SSE-only CPUs:-)
+
+sub sse_enccompact()
+{
+	&pshufw	("mm1","mm0",0x08);		#  5, 4, 1, 0
+	&pshufw	("mm5","mm4",0x0d);		# 15,14,11,10
+	&movd	("eax","mm1");			#  5, 4, 1, 0
+	&movd	("ebx","mm5");			# 15,14,11,10
+
+	&movz	($acc,&LB("eax"));		#  0
+	&movz	("ecx",&BP(-128,$tbl,$acc,1));	#  0
+	&pshufw	("mm2","mm0",0x0d);		#  7, 6, 3, 2
+	&movz	("edx",&HB("eax"));		#  1
+	&movz	("edx",&BP(-128,$tbl,"edx",1));	#  1
+	&shl	("edx",8);			#  1
+	&shr	("eax",16);			#  5, 4
+
+	&movz	($acc,&LB("ebx"));		# 10
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 10
+	&shl	($acc,16);			# 10
+	&or	("ecx",$acc);			# 10
+	&pshufw	("mm6","mm4",0x08);		# 13,12, 9, 8
+	&movz	($acc,&HB("ebx"));		# 11
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 11
+	&shl	($acc,24);			# 11
+	&or	("edx",$acc);			# 11
+	&shr	("ebx",16);			# 15,14
+
+	&movz	($acc,&HB("eax"));		#  5
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  5
+	&shl	($acc,8);			#  5
+	&or	("ecx",$acc);			#  5
+	&movz	($acc,&HB("ebx"));		# 15
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 15
+	&shl	($acc,24);			# 15
+	&or	("ecx",$acc);			# 15
+	&movd	("mm0","ecx");			# t[0] collected
+
+	&movz	($acc,&LB("eax"));		#  4
+	&movz	("ecx",&BP(-128,$tbl,$acc,1));	#  4
+	&movd	("eax","mm2");			#  7, 6, 3, 2
+	&movz	($acc,&LB("ebx"));		# 14
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 14
+	&shl	($acc,16);			# 14
+	&or	("ecx",$acc);			# 14
+
+	&movd	("ebx","mm6");			# 13,12, 9, 8
+	&movz	($acc,&HB("eax"));		#  3
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  3
+	&shl	($acc,24);			#  3
+	&or	("ecx",$acc);			#  3
+	&movz	($acc,&HB("ebx"));		#  9
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  9
+	&shl	($acc,8);			#  9
+	&or	("ecx",$acc);			#  9
+	&movd	("mm1","ecx");			# t[1] collected
+
+	&movz	($acc,&LB("ebx"));		#  8
+	&movz	("ecx",&BP(-128,$tbl,$acc,1));	#  8
+	&shr	("ebx",16);			# 13,12
+	&movz	($acc,&LB("eax"));		#  2
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  2
+	&shl	($acc,16);			#  2
+	&or	("ecx",$acc);			#  2
+	&shr	("eax",16);			#  7, 6
+
+	&punpckldq	("mm0","mm1");		# t[0,1] collected
+
+	&movz	($acc,&HB("eax"));		#  7
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  7
+	&shl	($acc,24);			#  7
+	&or	("ecx",$acc);			#  7
+	&and	("eax",0xff);			#  6
+	&movz	("eax",&BP(-128,$tbl,"eax",1));	#  6
+	&shl	("eax",16);			#  6
+	&or	("edx","eax");			#  6
+	&movz	($acc,&HB("ebx"));		# 13
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 13
+	&shl	($acc,8);			# 13
+	&or	("ecx",$acc);			# 13
+	&movd	("mm4","ecx");			# t[2] collected
+	&and	("ebx",0xff);			# 12
+	&movz	("ebx",&BP(-128,$tbl,"ebx",1));	# 12
+	&or	("edx","ebx");			# 12
+	&movd	("mm5","edx");			# t[3] collected
+
+	&punpckldq	("mm4","mm5");		# t[2,3] collected
+}
+
+					if (!$x86only) {
+&function_begin_B("_sse_AES_encrypt_compact");
+	&pxor	("mm0",&QWP(0,$key));	#  7, 6, 5, 4, 3, 2, 1, 0
+	&pxor	("mm4",&QWP(8,$key));	# 15,14,13,12,11,10, 9, 8
+
+	# note that caller is expected to allocate stack frame for me!
+	&mov	($acc,&DWP(240,$key));		# load key->rounds
+	&lea	($acc,&DWP(-2,$acc,$acc));
+	&lea	($acc,&DWP(0,$key,$acc,8));
+	&mov	($__end,$acc);			# end of key schedule
+
+	&mov	($s0,0x1b1b1b1b);		# magic constant
+	&mov	(&DWP(8,"esp"),$s0);
+	&mov	(&DWP(12,"esp"),$s0);
+
+	# prefetch Te4
+	&mov	($s0,&DWP(0-128,$tbl));
+	&mov	($s1,&DWP(32-128,$tbl));
+	&mov	($s2,&DWP(64-128,$tbl));
+	&mov	($s3,&DWP(96-128,$tbl));
+	&mov	($s0,&DWP(128-128,$tbl));
+	&mov	($s1,&DWP(160-128,$tbl));
+	&mov	($s2,&DWP(192-128,$tbl));
+	&mov	($s3,&DWP(224-128,$tbl));
+
+	&set_label("loop",16);
+		&sse_enccompact();
+		&add	($key,16);
+		&cmp	($key,$__end);
+		&ja	(&label("out"));
+
+		&movq	("mm2",&QWP(8,"esp"));
+		&pxor	("mm3","mm3");		&pxor	("mm7","mm7");
+		&movq	("mm1","mm0");		&movq	("mm5","mm4");	# r0
+		&pcmpgtb("mm3","mm0");		&pcmpgtb("mm7","mm4");
+		&pand	("mm3","mm2");		&pand	("mm7","mm2");
+		&pshufw	("mm2","mm0",0xb1);	&pshufw	("mm6","mm4",0xb1);# ROTATE(r0,16)
+		&paddb	("mm0","mm0");		&paddb	("mm4","mm4");
+		&pxor	("mm0","mm3");		&pxor	("mm4","mm7");	# = r2
+		&pshufw	("mm3","mm2",0xb1);	&pshufw	("mm7","mm6",0xb1);# r0
+		&pxor	("mm1","mm0");		&pxor	("mm5","mm4");	# r0^r2
+		&pxor	("mm0","mm2");		&pxor	("mm4","mm6");	# ^= ROTATE(r0,16)
+
+		&movq	("mm2","mm3");		&movq	("mm6","mm7");
+		&pslld	("mm3",8);		&pslld	("mm7",8);
+		&psrld	("mm2",24);		&psrld	("mm6",24);
+		&pxor	("mm0","mm3");		&pxor	("mm4","mm7");	# ^= r0<<8
+		&pxor	("mm0","mm2");		&pxor	("mm4","mm6");	# ^= r0>>24
+
+		&movq	("mm3","mm1");		&movq	("mm7","mm5");
+		&movq	("mm2",&QWP(0,$key));	&movq	("mm6",&QWP(8,$key));
+		&psrld	("mm1",8);		&psrld	("mm5",8);
+		&mov	($s0,&DWP(0-128,$tbl));
+		&pslld	("mm3",24);		&pslld	("mm7",24);
+		&mov	($s1,&DWP(64-128,$tbl));
+		&pxor	("mm0","mm1");		&pxor	("mm4","mm5");	# ^= (r2^r0)<<8
+		&mov	($s2,&DWP(128-128,$tbl));
+		&pxor	("mm0","mm3");		&pxor	("mm4","mm7");	# ^= (r2^r0)>>24
+		&mov	($s3,&DWP(192-128,$tbl));
+
+		&pxor	("mm0","mm2");		&pxor	("mm4","mm6");
+	&jmp	(&label("loop"));
+
+	&set_label("out",16);
+	&pxor	("mm0",&QWP(0,$key));
+	&pxor	("mm4",&QWP(8,$key));
+
+	&ret	();
+&function_end_B("_sse_AES_encrypt_compact");
+					}
+
+######################################################################
+# Vanilla block function.
+######################################################################
+
+sub encstep()
+{ my ($i,$te,@s) = @_;
+  my $tmp = $key;
+  my $out = $i==3?$s[0]:$acc;
+
+	# lines marked with #%e?x[i] denote "reordered" instructions...
+	if ($i==3)  {	&mov	($key,$__key);			}##%edx
+	else        {	&mov	($out,$s[0]);
+			&and	($out,0xFF);			}
+	if ($i==1)  {	&shr	($s[0],16);			}#%ebx[1]
+	if ($i==2)  {	&shr	($s[0],24);			}#%ecx[2]
+			&mov	($out,&DWP(0,$te,$out,8));
+
+	if ($i==3)  {	$tmp=$s[1];				}##%eax
+			&movz	($tmp,&HB($s[1]));
+			&xor	($out,&DWP(3,$te,$tmp,8));
+
+	if ($i==3)  {	$tmp=$s[2]; &mov ($s[1],$__s0);		}##%ebx
+	else        {	&mov	($tmp,$s[2]);
+			&shr	($tmp,16);			}
+	if ($i==2)  {	&and	($s[1],0xFF);			}#%edx[2]
+			&and	($tmp,0xFF);
+			&xor	($out,&DWP(2,$te,$tmp,8));
+
+	if ($i==3)  {	$tmp=$s[3]; &mov ($s[2],$__s1);		}##%ecx
+	elsif($i==2){	&movz	($tmp,&HB($s[3]));		}#%ebx[2]
+	else        {	&mov	($tmp,$s[3]);
+			&shr	($tmp,24)			}
+			&xor	($out,&DWP(1,$te,$tmp,8));
+	if ($i<2)   {	&mov	(&DWP(4+4*$i,"esp"),$out);	}
+	if ($i==3)  {	&mov	($s[3],$acc);			}
+			&comment();
+}
+
+sub enclast()
+{ my ($i,$te,@s)=@_;
+  my $tmp = $key;
+  my $out = $i==3?$s[0]:$acc;
+
+	if ($i==3)  {	&mov	($key,$__key);			}##%edx
+	else        {	&mov	($out,$s[0]);			}
+			&and	($out,0xFF);
+	if ($i==1)  {	&shr	($s[0],16);			}#%ebx[1]
+	if ($i==2)  {	&shr	($s[0],24);			}#%ecx[2]
+			&mov	($out,&DWP(2,$te,$out,8));
+			&and	($out,0x000000ff);
+
+	if ($i==3)  {	$tmp=$s[1];				}##%eax
+			&movz	($tmp,&HB($s[1]));
+			&mov	($tmp,&DWP(0,$te,$tmp,8));
+			&and	($tmp,0x0000ff00);
+			&xor	($out,$tmp);
+
+	if ($i==3)  {	$tmp=$s[2]; &mov ($s[1],$__s0);		}##%ebx
+	else        {	&mov	($tmp,$s[2]);
+			&shr	($tmp,16);			}
+	if ($i==2)  {	&and	($s[1],0xFF);			}#%edx[2]
+			&and	($tmp,0xFF);
+			&mov	($tmp,&DWP(0,$te,$tmp,8));
+			&and	($tmp,0x00ff0000);
+			&xor	($out,$tmp);
+
+	if ($i==3)  {	$tmp=$s[3]; &mov ($s[2],$__s1);		}##%ecx
+	elsif($i==2){	&movz	($tmp,&HB($s[3]));		}#%ebx[2]
+	else        {	&mov	($tmp,$s[3]);
+			&shr	($tmp,24);			}
+			&mov	($tmp,&DWP(2,$te,$tmp,8));
+			&and	($tmp,0xff000000);
+			&xor	($out,$tmp);
+	if ($i<2)   {	&mov	(&DWP(4+4*$i,"esp"),$out);	}
+	if ($i==3)  {	&mov	($s[3],$acc);			}
+}
+
+&function_begin_B("_x86_AES_encrypt");
+	if ($vertical_spin) {
+		# I need high parts of volatile registers to be accessible...
+		&exch	($s1="edi",$key="ebx");
+		&mov	($s2="esi",$acc="ecx");
+	}
+
+	# note that caller is expected to allocate stack frame for me!
+	&mov	($__key,$key);			# save key
+
+	&xor	($s0,&DWP(0,$key));		# xor with key
+	&xor	($s1,&DWP(4,$key));
+	&xor	($s2,&DWP(8,$key));
+	&xor	($s3,&DWP(12,$key));
+
+	&mov	($acc,&DWP(240,$key));		# load key->rounds
+
+	if ($small_footprint) {
+	    &lea	($acc,&DWP(-2,$acc,$acc));
+	    &lea	($acc,&DWP(0,$key,$acc,8));
+	    &mov	($__end,$acc);		# end of key schedule
+
+	    &set_label("loop",16);
+		if ($vertical_spin) {
+		    &encvert($tbl,$s0,$s1,$s2,$s3);
+		} else {
+		    &encstep(0,$tbl,$s0,$s1,$s2,$s3);
+		    &encstep(1,$tbl,$s1,$s2,$s3,$s0);
+		    &encstep(2,$tbl,$s2,$s3,$s0,$s1);
+		    &encstep(3,$tbl,$s3,$s0,$s1,$s2);
+		}
+		&add	($key,16);		# advance rd_key
+		&xor	($s0,&DWP(0,$key));
+		&xor	($s1,&DWP(4,$key));
+		&xor	($s2,&DWP(8,$key));
+		&xor	($s3,&DWP(12,$key));
+	    &cmp	($key,$__end);
+	    &mov	($__key,$key);
+	    &jb		(&label("loop"));
+	}
+	else {
+	    &cmp	($acc,10);
+	    &jle	(&label("10rounds"));
+	    &cmp	($acc,12);
+	    &jle	(&label("12rounds"));
+
+	&set_label("14rounds",4);
+	    for ($i=1;$i<3;$i++) {
+		if ($vertical_spin) {
+		    &encvert($tbl,$s0,$s1,$s2,$s3);
+		} else {
+		    &encstep(0,$tbl,$s0,$s1,$s2,$s3);
+		    &encstep(1,$tbl,$s1,$s2,$s3,$s0);
+		    &encstep(2,$tbl,$s2,$s3,$s0,$s1);
+		    &encstep(3,$tbl,$s3,$s0,$s1,$s2);
+		}
+		&xor	($s0,&DWP(16*$i+0,$key));
+		&xor	($s1,&DWP(16*$i+4,$key));
+		&xor	($s2,&DWP(16*$i+8,$key));
+		&xor	($s3,&DWP(16*$i+12,$key));
+	    }
+	    &add	($key,32);
+	    &mov	($__key,$key);		# advance rd_key
+	&set_label("12rounds",4);
+	    for ($i=1;$i<3;$i++) {
+		if ($vertical_spin) {
+		    &encvert($tbl,$s0,$s1,$s2,$s3);
+		} else {
+		    &encstep(0,$tbl,$s0,$s1,$s2,$s3);
+		    &encstep(1,$tbl,$s1,$s2,$s3,$s0);
+		    &encstep(2,$tbl,$s2,$s3,$s0,$s1);
+		    &encstep(3,$tbl,$s3,$s0,$s1,$s2);
+		}
+		&xor	($s0,&DWP(16*$i+0,$key));
+		&xor	($s1,&DWP(16*$i+4,$key));
+		&xor	($s2,&DWP(16*$i+8,$key));
+		&xor	($s3,&DWP(16*$i+12,$key));
+	    }
+	    &add	($key,32);
+	    &mov	($__key,$key);		# advance rd_key
+	&set_label("10rounds",4);
+	    for ($i=1;$i<10;$i++) {
+		if ($vertical_spin) {
+		    &encvert($tbl,$s0,$s1,$s2,$s3);
+		} else {
+		    &encstep(0,$tbl,$s0,$s1,$s2,$s3);
+		    &encstep(1,$tbl,$s1,$s2,$s3,$s0);
+		    &encstep(2,$tbl,$s2,$s3,$s0,$s1);
+		    &encstep(3,$tbl,$s3,$s0,$s1,$s2);
+		}
+		&xor	($s0,&DWP(16*$i+0,$key));
+		&xor	($s1,&DWP(16*$i+4,$key));
+		&xor	($s2,&DWP(16*$i+8,$key));
+		&xor	($s3,&DWP(16*$i+12,$key));
+	    }
+	}
+
+	if ($vertical_spin) {
+	    # "reincarnate" some registers for "horizontal" spin...
+	    &mov	($s1="ebx",$key="edi");
+	    &mov	($s2="ecx",$acc="esi");
+	}
+	&enclast(0,$tbl,$s0,$s1,$s2,$s3);
+	&enclast(1,$tbl,$s1,$s2,$s3,$s0);
+	&enclast(2,$tbl,$s2,$s3,$s0,$s1);
+	&enclast(3,$tbl,$s3,$s0,$s1,$s2);
+
+	&add	($key,$small_footprint?16:160);
+	&xor	($s0,&DWP(0,$key));
+	&xor	($s1,&DWP(4,$key));
+	&xor	($s2,&DWP(8,$key));
+	&xor	($s3,&DWP(12,$key));
+
+	&ret	();
+
+&set_label("AES_Te",64);	# Yes! I keep it in the code segment!
+	&_data_word(0xa56363c6, 0x847c7cf8, 0x997777ee, 0x8d7b7bf6);
+	&_data_word(0x0df2f2ff, 0xbd6b6bd6, 0xb16f6fde, 0x54c5c591);
+	&_data_word(0x50303060, 0x03010102, 0xa96767ce, 0x7d2b2b56);
+	&_data_word(0x19fefee7, 0x62d7d7b5, 0xe6abab4d, 0x9a7676ec);
+	&_data_word(0x45caca8f, 0x9d82821f, 0x40c9c989, 0x877d7dfa);
+	&_data_word(0x15fafaef, 0xeb5959b2, 0xc947478e, 0x0bf0f0fb);
+	&_data_word(0xecadad41, 0x67d4d4b3, 0xfda2a25f, 0xeaafaf45);
+	&_data_word(0xbf9c9c23, 0xf7a4a453, 0x967272e4, 0x5bc0c09b);
+	&_data_word(0xc2b7b775, 0x1cfdfde1, 0xae93933d, 0x6a26264c);
+	&_data_word(0x5a36366c, 0x413f3f7e, 0x02f7f7f5, 0x4fcccc83);
+	&_data_word(0x5c343468, 0xf4a5a551, 0x34e5e5d1, 0x08f1f1f9);
+	&_data_word(0x937171e2, 0x73d8d8ab, 0x53313162, 0x3f15152a);
+	&_data_word(0x0c040408, 0x52c7c795, 0x65232346, 0x5ec3c39d);
+	&_data_word(0x28181830, 0xa1969637, 0x0f05050a, 0xb59a9a2f);
+	&_data_word(0x0907070e, 0x36121224, 0x9b80801b, 0x3de2e2df);
+	&_data_word(0x26ebebcd, 0x6927274e, 0xcdb2b27f, 0x9f7575ea);
+	&_data_word(0x1b090912, 0x9e83831d, 0x742c2c58, 0x2e1a1a34);
+	&_data_word(0x2d1b1b36, 0xb26e6edc, 0xee5a5ab4, 0xfba0a05b);
+	&_data_word(0xf65252a4, 0x4d3b3b76, 0x61d6d6b7, 0xceb3b37d);
+	&_data_word(0x7b292952, 0x3ee3e3dd, 0x712f2f5e, 0x97848413);
+	&_data_word(0xf55353a6, 0x68d1d1b9, 0x00000000, 0x2cededc1);
+	&_data_word(0x60202040, 0x1ffcfce3, 0xc8b1b179, 0xed5b5bb6);
+	&_data_word(0xbe6a6ad4, 0x46cbcb8d, 0xd9bebe67, 0x4b393972);
+	&_data_word(0xde4a4a94, 0xd44c4c98, 0xe85858b0, 0x4acfcf85);
+	&_data_word(0x6bd0d0bb, 0x2aefefc5, 0xe5aaaa4f, 0x16fbfbed);
+	&_data_word(0xc5434386, 0xd74d4d9a, 0x55333366, 0x94858511);
+	&_data_word(0xcf45458a, 0x10f9f9e9, 0x06020204, 0x817f7ffe);
+	&_data_word(0xf05050a0, 0x443c3c78, 0xba9f9f25, 0xe3a8a84b);
+	&_data_word(0xf35151a2, 0xfea3a35d, 0xc0404080, 0x8a8f8f05);
+	&_data_word(0xad92923f, 0xbc9d9d21, 0x48383870, 0x04f5f5f1);
+	&_data_word(0xdfbcbc63, 0xc1b6b677, 0x75dadaaf, 0x63212142);
+	&_data_word(0x30101020, 0x1affffe5, 0x0ef3f3fd, 0x6dd2d2bf);
+	&_data_word(0x4ccdcd81, 0x140c0c18, 0x35131326, 0x2fececc3);
+	&_data_word(0xe15f5fbe, 0xa2979735, 0xcc444488, 0x3917172e);
+	&_data_word(0x57c4c493, 0xf2a7a755, 0x827e7efc, 0x473d3d7a);
+	&_data_word(0xac6464c8, 0xe75d5dba, 0x2b191932, 0x957373e6);
+	&_data_word(0xa06060c0, 0x98818119, 0xd14f4f9e, 0x7fdcdca3);
+	&_data_word(0x66222244, 0x7e2a2a54, 0xab90903b, 0x8388880b);
+	&_data_word(0xca46468c, 0x29eeeec7, 0xd3b8b86b, 0x3c141428);
+	&_data_word(0x79dedea7, 0xe25e5ebc, 0x1d0b0b16, 0x76dbdbad);
+	&_data_word(0x3be0e0db, 0x56323264, 0x4e3a3a74, 0x1e0a0a14);
+	&_data_word(0xdb494992, 0x0a06060c, 0x6c242448, 0xe45c5cb8);
+	&_data_word(0x5dc2c29f, 0x6ed3d3bd, 0xefacac43, 0xa66262c4);
+	&_data_word(0xa8919139, 0xa4959531, 0x37e4e4d3, 0x8b7979f2);
+	&_data_word(0x32e7e7d5, 0x43c8c88b, 0x5937376e, 0xb76d6dda);
+	&_data_word(0x8c8d8d01, 0x64d5d5b1, 0xd24e4e9c, 0xe0a9a949);
+	&_data_word(0xb46c6cd8, 0xfa5656ac, 0x07f4f4f3, 0x25eaeacf);
+	&_data_word(0xaf6565ca, 0x8e7a7af4, 0xe9aeae47, 0x18080810);
+	&_data_word(0xd5baba6f, 0x887878f0, 0x6f25254a, 0x722e2e5c);
+	&_data_word(0x241c1c38, 0xf1a6a657, 0xc7b4b473, 0x51c6c697);
+	&_data_word(0x23e8e8cb, 0x7cdddda1, 0x9c7474e8, 0x211f1f3e);
+	&_data_word(0xdd4b4b96, 0xdcbdbd61, 0x868b8b0d, 0x858a8a0f);
+	&_data_word(0x907070e0, 0x423e3e7c, 0xc4b5b571, 0xaa6666cc);
+	&_data_word(0xd8484890, 0x05030306, 0x01f6f6f7, 0x120e0e1c);
+	&_data_word(0xa36161c2, 0x5f35356a, 0xf95757ae, 0xd0b9b969);
+	&_data_word(0x91868617, 0x58c1c199, 0x271d1d3a, 0xb99e9e27);
+	&_data_word(0x38e1e1d9, 0x13f8f8eb, 0xb398982b, 0x33111122);
+	&_data_word(0xbb6969d2, 0x70d9d9a9, 0x898e8e07, 0xa7949433);
+	&_data_word(0xb69b9b2d, 0x221e1e3c, 0x92878715, 0x20e9e9c9);
+	&_data_word(0x49cece87, 0xff5555aa, 0x78282850, 0x7adfdfa5);
+	&_data_word(0x8f8c8c03, 0xf8a1a159, 0x80898909, 0x170d0d1a);
+	&_data_word(0xdabfbf65, 0x31e6e6d7, 0xc6424284, 0xb86868d0);
+	&_data_word(0xc3414182, 0xb0999929, 0x772d2d5a, 0x110f0f1e);
+	&_data_word(0xcbb0b07b, 0xfc5454a8, 0xd6bbbb6d, 0x3a16162c);
+
+#Te4	# four copies of Te4 to choose from to avoid L1 aliasing
+	&data_byte(0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5);
+	&data_byte(0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76);
+	&data_byte(0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0);
+	&data_byte(0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0);
+	&data_byte(0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc);
+	&data_byte(0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15);
+	&data_byte(0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a);
+	&data_byte(0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75);
+	&data_byte(0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0);
+	&data_byte(0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84);
+	&data_byte(0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b);
+	&data_byte(0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf);
+	&data_byte(0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85);
+	&data_byte(0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8);
+	&data_byte(0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5);
+	&data_byte(0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2);
+	&data_byte(0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17);
+	&data_byte(0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73);
+	&data_byte(0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88);
+	&data_byte(0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb);
+	&data_byte(0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c);
+	&data_byte(0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79);
+	&data_byte(0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9);
+	&data_byte(0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08);
+	&data_byte(0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6);
+	&data_byte(0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a);
+	&data_byte(0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e);
+	&data_byte(0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e);
+	&data_byte(0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94);
+	&data_byte(0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf);
+	&data_byte(0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68);
+	&data_byte(0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16);
+
+	&data_byte(0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5);
+	&data_byte(0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76);
+	&data_byte(0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0);
+	&data_byte(0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0);
+	&data_byte(0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc);
+	&data_byte(0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15);
+	&data_byte(0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a);
+	&data_byte(0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75);
+	&data_byte(0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0);
+	&data_byte(0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84);
+	&data_byte(0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b);
+	&data_byte(0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf);
+	&data_byte(0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85);
+	&data_byte(0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8);
+	&data_byte(0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5);
+	&data_byte(0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2);
+	&data_byte(0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17);
+	&data_byte(0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73);
+	&data_byte(0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88);
+	&data_byte(0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb);
+	&data_byte(0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c);
+	&data_byte(0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79);
+	&data_byte(0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9);
+	&data_byte(0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08);
+	&data_byte(0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6);
+	&data_byte(0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a);
+	&data_byte(0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e);
+	&data_byte(0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e);
+	&data_byte(0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94);
+	&data_byte(0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf);
+	&data_byte(0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68);
+	&data_byte(0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16);
+
+	&data_byte(0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5);
+	&data_byte(0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76);
+	&data_byte(0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0);
+	&data_byte(0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0);
+	&data_byte(0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc);
+	&data_byte(0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15);
+	&data_byte(0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a);
+	&data_byte(0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75);
+	&data_byte(0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0);
+	&data_byte(0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84);
+	&data_byte(0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b);
+	&data_byte(0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf);
+	&data_byte(0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85);
+	&data_byte(0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8);
+	&data_byte(0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5);
+	&data_byte(0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2);
+	&data_byte(0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17);
+	&data_byte(0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73);
+	&data_byte(0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88);
+	&data_byte(0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb);
+	&data_byte(0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c);
+	&data_byte(0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79);
+	&data_byte(0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9);
+	&data_byte(0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08);
+	&data_byte(0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6);
+	&data_byte(0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a);
+	&data_byte(0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e);
+	&data_byte(0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e);
+	&data_byte(0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94);
+	&data_byte(0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf);
+	&data_byte(0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68);
+	&data_byte(0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16);
+
+	&data_byte(0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5);
+	&data_byte(0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76);
+	&data_byte(0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0);
+	&data_byte(0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0);
+	&data_byte(0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc);
+	&data_byte(0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15);
+	&data_byte(0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a);
+	&data_byte(0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75);
+	&data_byte(0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0);
+	&data_byte(0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84);
+	&data_byte(0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b);
+	&data_byte(0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf);
+	&data_byte(0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85);
+	&data_byte(0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8);
+	&data_byte(0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5);
+	&data_byte(0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2);
+	&data_byte(0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17);
+	&data_byte(0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73);
+	&data_byte(0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88);
+	&data_byte(0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb);
+	&data_byte(0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c);
+	&data_byte(0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79);
+	&data_byte(0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9);
+	&data_byte(0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08);
+	&data_byte(0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6);
+	&data_byte(0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a);
+	&data_byte(0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e);
+	&data_byte(0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e);
+	&data_byte(0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94);
+	&data_byte(0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf);
+	&data_byte(0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68);
+	&data_byte(0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16);
+#rcon:
+	&data_word(0x00000001, 0x00000002, 0x00000004, 0x00000008);
+	&data_word(0x00000010, 0x00000020, 0x00000040, 0x00000080);
+	&data_word(0x0000001b, 0x00000036, 0x00000000, 0x00000000);
+	&data_word(0x00000000, 0x00000000, 0x00000000, 0x00000000);
+&function_end_B("_x86_AES_encrypt");
+
+# void AES_encrypt (const void *inp,void *out,const AES_KEY *key);
+&function_begin("AES_encrypt");
+	&mov	($acc,&wparam(0));		# load inp
+	&mov	($key,&wparam(2));		# load key
+
+	&mov	($s0,"esp");
+	&sub	("esp",36);
+	&and	("esp",-64);			# align to cache-line
+
+	# place stack frame just "above" the key schedule
+	&lea	($s1,&DWP(-64-63,$key));
+	&sub	($s1,"esp");
+	&neg	($s1);
+	&and	($s1,0x3C0);	# modulo 1024, but aligned to cache-line
+	&sub	("esp",$s1);
+	&add	("esp",4);	# 4 is reserved for caller's return address
+	&mov	($_esp,$s0);			# save stack pointer
+
+	&call   (&label("pic_point"));          # make it PIC!
+	&set_label("pic_point");
+	&blindpop($tbl);
+	&picmeup($s0,"OPENSSL_ia32cap_P",$tbl,&label("pic_point")) if (!$x86only);
+	&lea    ($tbl,&DWP(&label("AES_Te")."-".&label("pic_point"),$tbl));
+
+	# pick Te4 copy which can't "overlap" with stack frame or key schedule
+	&lea	($s1,&DWP(768-4,"esp"));
+	&sub	($s1,$tbl);
+	&and	($s1,0x300);
+	&lea	($tbl,&DWP(2048+128,$tbl,$s1));
+
+					if (!$x86only) {
+	&bt	(&DWP(0,$s0),25);	# check for SSE bit
+	&jnc	(&label("x86"));
+
+	&movq	("mm0",&QWP(0,$acc));
+	&movq	("mm4",&QWP(8,$acc));
+	&call	("_sse_AES_encrypt_compact");
+	&mov	("esp",$_esp);			# restore stack pointer
+	&mov	($acc,&wparam(1));		# load out
+	&movq	(&QWP(0,$acc),"mm0");		# write output data
+	&movq	(&QWP(8,$acc),"mm4");
+	&emms	();
+	&function_end_A();
+					}
+	&set_label("x86",16);
+	&mov	($_tbl,$tbl);
+	&mov	($s0,&DWP(0,$acc));		# load input data
+	&mov	($s1,&DWP(4,$acc));
+	&mov	($s2,&DWP(8,$acc));
+	&mov	($s3,&DWP(12,$acc));
+	&call	("_x86_AES_encrypt_compact");
+	&mov	("esp",$_esp);			# restore stack pointer
+	&mov	($acc,&wparam(1));		# load out
+	&mov	(&DWP(0,$acc),$s0);		# write output data
+	&mov	(&DWP(4,$acc),$s1);
+	&mov	(&DWP(8,$acc),$s2);
+	&mov	(&DWP(12,$acc),$s3);
+&function_end("AES_encrypt");
+
+#--------------------------------------------------------------------#
+
+######################################################################
+# "Compact" block function
+######################################################################
+
+sub deccompact()
+{ my $Fn = mov;
+  while ($#_>5) { pop(@_); $Fn=sub{}; }
+  my ($i,$td,@s)=@_;
+  my $tmp = $key;
+  my $out = $i==3?$s[0]:$acc;
+
+	# $Fn is used in first compact round and its purpose is to
+	# void restoration of some values from stack, so that after
+	# 4xdeccompact with extra argument $key, $s0 and $s1 values
+	# are left there...
+	if($i==3)   {	&$Fn	($key,$__key);			}
+	else        {	&mov	($out,$s[0]);			}
+			&and	($out,0xFF);
+			&movz	($out,&BP(-128,$td,$out,1));
+
+	if ($i==3)  {	$tmp=$s[1];				}
+			&movz	($tmp,&HB($s[1]));
+			&movz	($tmp,&BP(-128,$td,$tmp,1));
+			&shl	($tmp,8);
+			&xor	($out,$tmp);
+
+	if ($i==3)  {	$tmp=$s[2]; &mov ($s[1],$acc);		}
+	else        {	mov	($tmp,$s[2]);			}
+			&shr	($tmp,16);
+			&and	($tmp,0xFF);
+			&movz	($tmp,&BP(-128,$td,$tmp,1));
+			&shl	($tmp,16);
+			&xor	($out,$tmp);
+
+	if ($i==3)  {	$tmp=$s[3]; &$Fn ($s[2],$__s1);		}
+	else        {	&mov	($tmp,$s[3]);			}
+			&shr	($tmp,24);
+			&movz	($tmp,&BP(-128,$td,$tmp,1));
+			&shl	($tmp,24);
+			&xor	($out,$tmp);
+	if ($i<2)   {	&mov	(&DWP(4+4*$i,"esp"),$out);	}
+	if ($i==3)  {	&$Fn	($s[3],$__s0);			}
+}
+
+# must be called with 2,3,0,1 as argument sequence!!!
+sub dectransform()
+{ my @s = ($s0,$s1,$s2,$s3);
+  my $i = shift;
+  my $tmp = $key;
+  my $tp2 = @s[($i+2)%4]; $tp2 = @s[2] if ($i==1);
+  my $tp4 = @s[($i+3)%4]; $tp4 = @s[3] if ($i==1);
+  my $tp8 = $tbl;
+
+	&mov	($acc,$s[$i]);
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
+	&shr	($tmp,7);
+	&lea	($tp2,&DWP(0,$s[$i],$s[$i]));
+	&sub	($acc,$tmp);
+	&and	($tp2,0xfefefefe);
+	&and	($acc,0x1b1b1b1b);
+	&xor	($acc,$tp2);
+	&mov	($tp2,$acc);
+
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
+	&shr	($tmp,7);
+	&lea	($tp4,&DWP(0,$tp2,$tp2));
+	&sub	($acc,$tmp);
+	&and	($tp4,0xfefefefe);
+	&and	($acc,0x1b1b1b1b);
+	 &xor	($tp2,$s[$i]);	# tp2^tp1
+	&xor	($acc,$tp4);
+	&mov	($tp4,$acc);
+
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
+	&shr	($tmp,7);
+	&lea	($tp8,&DWP(0,$tp4,$tp4));
+	&sub	($acc,$tmp);
+	&and	($tp8,0xfefefefe);
+	&and	($acc,0x1b1b1b1b);
+	 &xor	($tp4,$s[$i]);	# tp4^tp1
+	 &rotl	($s[$i],8);	# = ROTATE(tp1,8)
+	&xor	($tp8,$acc);
+
+	&xor	($s[$i],$tp2);
+	&xor	($tp2,$tp8);
+	&rotl	($tp2,24);
+	&xor	($s[$i],$tp4);
+	&xor	($tp4,$tp8);
+	&rotl	($tp4,16);
+	&xor	($s[$i],$tp8);	# ^= tp8^(tp4^tp1)^(tp2^tp1)
+	&rotl	($tp8,8);
+	&xor	($s[$i],$tp2);	# ^= ROTATE(tp8^tp2^tp1,24)
+	&xor	($s[$i],$tp4);	# ^= ROTATE(tp8^tp4^tp1,16)
+	 &mov	($s[0],$__s0)			if($i==2); #prefetch $s0
+	 &mov	($s[1],$__s1)			if($i==3); #prefetch $s1
+	 &mov	($s[2],$__s2)			if($i==1);
+	&xor	($s[$i],$tp8);	# ^= ROTATE(tp8,8)
+
+	&mov	($s[3],$__s3)			if($i==1);
+	&mov	(&DWP(4+4*$i,"esp"),$s[$i])	if($i>=2);
+}
+
+&function_begin_B("_x86_AES_decrypt_compact");
+	# note that caller is expected to allocate stack frame for me!
+	&mov	($__key,$key);			# save key
+
+	&xor	($s0,&DWP(0,$key));		# xor with key
+	&xor	($s1,&DWP(4,$key));
+	&xor	($s2,&DWP(8,$key));
+	&xor	($s3,&DWP(12,$key));
+
+	&mov	($acc,&DWP(240,$key));		# load key->rounds
+
+	&lea	($acc,&DWP(-2,$acc,$acc));
+	&lea	($acc,&DWP(0,$key,$acc,8));
+	&mov	($__end,$acc);			# end of key schedule
+
+	# prefetch Td4
+	&mov	($key,&DWP(0-128,$tbl));
+	&mov	($acc,&DWP(32-128,$tbl));
+	&mov	($key,&DWP(64-128,$tbl));
+	&mov	($acc,&DWP(96-128,$tbl));
+	&mov	($key,&DWP(128-128,$tbl));
+	&mov	($acc,&DWP(160-128,$tbl));
+	&mov	($key,&DWP(192-128,$tbl));
+	&mov	($acc,&DWP(224-128,$tbl));
+
+	&set_label("loop",16);
+
+		&deccompact(0,$tbl,$s0,$s3,$s2,$s1,1);
+		&deccompact(1,$tbl,$s1,$s0,$s3,$s2,1);
+		&deccompact(2,$tbl,$s2,$s1,$s0,$s3,1);
+		&deccompact(3,$tbl,$s3,$s2,$s1,$s0,1);
+		&dectransform(2);
+		&dectransform(3);
+		&dectransform(0);
+		&dectransform(1);
+		&mov 	($key,$__key);
+		&mov	($tbl,$__tbl);
+		&add	($key,16);		# advance rd_key
+		&xor	($s0,&DWP(0,$key));
+		&xor	($s1,&DWP(4,$key));
+		&xor	($s2,&DWP(8,$key));
+		&xor	($s3,&DWP(12,$key));
+
+	&cmp	($key,$__end);
+	&mov	($__key,$key);
+	&jb	(&label("loop"));
+
+	&deccompact(0,$tbl,$s0,$s3,$s2,$s1);
+	&deccompact(1,$tbl,$s1,$s0,$s3,$s2);
+	&deccompact(2,$tbl,$s2,$s1,$s0,$s3);
+	&deccompact(3,$tbl,$s3,$s2,$s1,$s0);
+
+	&xor	($s0,&DWP(16,$key));
+	&xor	($s1,&DWP(20,$key));
+	&xor	($s2,&DWP(24,$key));
+	&xor	($s3,&DWP(28,$key));
+
+	&ret	();
+&function_end_B("_x86_AES_decrypt_compact");
+
+######################################################################
+# "Compact" SSE block function.
+######################################################################
+
+sub sse_deccompact()
+{
+	&pshufw	("mm1","mm0",0x0c);		#  7, 6, 1, 0
+	&movd	("eax","mm1");			#  7, 6, 1, 0
+
+	&pshufw	("mm5","mm4",0x09);		# 13,12,11,10
+	&movz	($acc,&LB("eax"));		#  0
+	&movz	("ecx",&BP(-128,$tbl,$acc,1));	#  0
+	&movd	("ebx","mm5");			# 13,12,11,10
+	&movz	("edx",&HB("eax"));		#  1
+	&movz	("edx",&BP(-128,$tbl,"edx",1));	#  1
+	&shl	("edx",8);			#  1
+
+	&pshufw	("mm2","mm0",0x06);		#  3, 2, 5, 4
+	&movz	($acc,&LB("ebx"));		# 10
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 10
+	&shl	($acc,16);			# 10
+	&or	("ecx",$acc);			# 10
+	&shr	("eax",16);			#  7, 6
+	&movz	($acc,&HB("ebx"));		# 11
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 11
+	&shl	($acc,24);			# 11
+	&or	("edx",$acc);			# 11
+	&shr	("ebx",16);			# 13,12
+
+	&pshufw	("mm6","mm4",0x03);		# 9, 8,15,14
+	&movz	($acc,&HB("eax"));		#  7
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  7
+	&shl	($acc,24);			#  7
+	&or	("ecx",$acc);			#  7
+	&movz	($acc,&HB("ebx"));		# 13
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 13
+	&shl	($acc,8);			# 13
+	&or	("ecx",$acc);			# 13
+	&movd	("mm0","ecx");			# t[0] collected
+
+	&movz	($acc,&LB("eax"));		#  6
+	&movd	("eax","mm2");			#  3, 2, 5, 4
+	&movz	("ecx",&BP(-128,$tbl,$acc,1));	#  6
+	&shl	("ecx",16);			#  6
+	&movz	($acc,&LB("ebx"));		# 12
+	&movd	("ebx","mm6");			#  9, 8,15,14
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 12
+	&or	("ecx",$acc);			# 12
+
+	&movz	($acc,&LB("eax"));		#  4
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  4
+	&or	("edx",$acc);			#  4
+	&movz	($acc,&LB("ebx"));		# 14
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 14
+	&shl	($acc,16);			# 14
+	&or	("edx",$acc);			# 14
+	&movd	("mm1","edx");			# t[1] collected
+
+	&movz	($acc,&HB("eax"));		#  5
+	&movz	("edx",&BP(-128,$tbl,$acc,1));	#  5
+	&shl	("edx",8);			#  5
+	&movz	($acc,&HB("ebx"));		# 15
+	&shr	("eax",16);			#  3, 2
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 15
+	&shl	($acc,24);			# 15
+	&or	("edx",$acc);			# 15
+	&shr	("ebx",16);			#  9, 8
+
+	&punpckldq	("mm0","mm1");		# t[0,1] collected
+
+	&movz	($acc,&HB("ebx"));		#  9
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  9
+	&shl	($acc,8);			#  9
+	&or	("ecx",$acc);			#  9
+	&and	("ebx",0xff);			#  8
+	&movz	("ebx",&BP(-128,$tbl,"ebx",1));	#  8
+	&or	("edx","ebx");			#  8
+	&movz	($acc,&LB("eax"));		#  2
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  2
+	&shl	($acc,16);			#  2
+	&or	("edx",$acc);			#  2
+	&movd	("mm4","edx");			# t[2] collected
+	&movz	("eax",&HB("eax"));		#  3
+	&movz	("eax",&BP(-128,$tbl,"eax",1));	#  3
+	&shl	("eax",24);			#  3
+	&or	("ecx","eax");			#  3
+	&movd	("mm5","ecx");			# t[3] collected
+
+	&punpckldq	("mm4","mm5");		# t[2,3] collected
+}
+
+					if (!$x86only) {
+&function_begin_B("_sse_AES_decrypt_compact");
+	&pxor	("mm0",&QWP(0,$key));	#  7, 6, 5, 4, 3, 2, 1, 0
+	&pxor	("mm4",&QWP(8,$key));	# 15,14,13,12,11,10, 9, 8
+
+	# note that caller is expected to allocate stack frame for me!
+	&mov	($acc,&DWP(240,$key));		# load key->rounds
+	&lea	($acc,&DWP(-2,$acc,$acc));
+	&lea	($acc,&DWP(0,$key,$acc,8));
+	&mov	($__end,$acc);			# end of key schedule
+
+	&mov	($s0,0x1b1b1b1b);		# magic constant
+	&mov	(&DWP(8,"esp"),$s0);
+	&mov	(&DWP(12,"esp"),$s0);
+
+	# prefetch Td4
+	&mov	($s0,&DWP(0-128,$tbl));
+	&mov	($s1,&DWP(32-128,$tbl));
+	&mov	($s2,&DWP(64-128,$tbl));
+	&mov	($s3,&DWP(96-128,$tbl));
+	&mov	($s0,&DWP(128-128,$tbl));
+	&mov	($s1,&DWP(160-128,$tbl));
+	&mov	($s2,&DWP(192-128,$tbl));
+	&mov	($s3,&DWP(224-128,$tbl));
+
+	&set_label("loop",16);
+		&sse_deccompact();
+		&add	($key,16);
+		&cmp	($key,$__end);
+		&ja	(&label("out"));
+
+		# ROTATE(x^y,N) == ROTATE(x,N)^ROTATE(y,N)
+		&movq	("mm3","mm0");		&movq	("mm7","mm4");
+		&movq	("mm2","mm0",1);	&movq	("mm6","mm4",1);
+		&movq	("mm1","mm0");		&movq	("mm5","mm4");
+		&pshufw	("mm0","mm0",0xb1);	&pshufw	("mm4","mm4",0xb1);# = ROTATE(tp0,16)
+		&pslld	("mm2",8);		&pslld	("mm6",8);
+		&psrld	("mm3",8);		&psrld	("mm7",8);
+		&pxor	("mm0","mm2");		&pxor	("mm4","mm6");	# ^= tp0<<8
+		&pxor	("mm0","mm3");		&pxor	("mm4","mm7");	# ^= tp0>>8
+		&pslld	("mm2",16);		&pslld	("mm6",16);
+		&psrld	("mm3",16);		&psrld	("mm7",16);
+		&pxor	("mm0","mm2");		&pxor	("mm4","mm6");	# ^= tp0<<24
+		&pxor	("mm0","mm3");		&pxor	("mm4","mm7");	# ^= tp0>>24
+
+		&movq	("mm3",&QWP(8,"esp"));
+		&pxor	("mm2","mm2");		&pxor	("mm6","mm6");
+		&pcmpgtb("mm2","mm1");		&pcmpgtb("mm6","mm5");
+		&pand	("mm2","mm3");		&pand	("mm6","mm3");
+		&paddb	("mm1","mm1");		&paddb	("mm5","mm5");
+		&pxor	("mm1","mm2");		&pxor	("mm5","mm6");	# tp2
+		&movq	("mm3","mm1");		&movq	("mm7","mm5");
+		&movq	("mm2","mm1");		&movq	("mm6","mm5");
+		&pxor	("mm0","mm1");		&pxor	("mm4","mm5");	# ^= tp2
+		&pslld	("mm3",24);		&pslld	("mm7",24);
+		&psrld	("mm2",8);		&psrld	("mm6",8);
+		&pxor	("mm0","mm3");		&pxor	("mm4","mm7");	# ^= tp2<<24
+		&pxor	("mm0","mm2");		&pxor	("mm4","mm6");	# ^= tp2>>8
+
+		&movq	("mm2",&QWP(8,"esp"));
+		&pxor	("mm3","mm3");		&pxor	("mm7","mm7");
+		&pcmpgtb("mm3","mm1");		&pcmpgtb("mm7","mm5");
+		&pand	("mm3","mm2");		&pand	("mm7","mm2");
+		&paddb	("mm1","mm1");		&paddb	("mm5","mm5");
+		&pxor	("mm1","mm3");		&pxor	("mm5","mm7");	# tp4
+		&pshufw	("mm3","mm1",0xb1);	&pshufw	("mm7","mm5",0xb1);
+		&pxor	("mm0","mm1");		&pxor	("mm4","mm5");	# ^= tp4
+		&pxor	("mm0","mm3");		&pxor	("mm4","mm7");	# ^= ROTATE(tp4,16)
+
+		&pxor	("mm3","mm3");		&pxor	("mm7","mm7");
+		&pcmpgtb("mm3","mm1");		&pcmpgtb("mm7","mm5");
+		&pand	("mm3","mm2");		&pand	("mm7","mm2");
+		&paddb	("mm1","mm1");		&paddb	("mm5","mm5");
+		&pxor	("mm1","mm3");		&pxor	("mm5","mm7");	# tp8
+		&pxor	("mm0","mm1");		&pxor	("mm4","mm5");	# ^= tp8
+		&movq	("mm3","mm1");		&movq	("mm7","mm5");
+		&pshufw	("mm2","mm1",0xb1);	&pshufw	("mm6","mm5",0xb1);
+		&pxor	("mm0","mm2");		&pxor	("mm4","mm6");	# ^= ROTATE(tp8,16)
+		&pslld	("mm1",8);		&pslld	("mm5",8);
+		&psrld	("mm3",8);		&psrld	("mm7",8);
+		&movq	("mm2",&QWP(0,$key));	&movq	("mm6",&QWP(8,$key));
+		&pxor	("mm0","mm1");		&pxor	("mm4","mm5");	# ^= tp8<<8
+		&pxor	("mm0","mm3");		&pxor	("mm4","mm7");	# ^= tp8>>8
+		&mov	($s0,&DWP(0-128,$tbl));
+		&pslld	("mm1",16);		&pslld	("mm5",16);
+		&mov	($s1,&DWP(64-128,$tbl));
+		&psrld	("mm3",16);		&psrld	("mm7",16);
+		&mov	($s2,&DWP(128-128,$tbl));
+		&pxor	("mm0","mm1");		&pxor	("mm4","mm5");	# ^= tp8<<24
+		&mov	($s3,&DWP(192-128,$tbl));
+		&pxor	("mm0","mm3");		&pxor	("mm4","mm7");	# ^= tp8>>24
+
+		&pxor	("mm0","mm2");		&pxor	("mm4","mm6");
+	&jmp	(&label("loop"));
+
+	&set_label("out",16);
+	&pxor	("mm0",&QWP(0,$key));
+	&pxor	("mm4",&QWP(8,$key));
+
+	&ret	();
+&function_end_B("_sse_AES_decrypt_compact");
+					}
+
+######################################################################
+# Vanilla block function.
+######################################################################
+
+sub decstep()
+{ my ($i,$td,@s) = @_;
+  my $tmp = $key;
+  my $out = $i==3?$s[0]:$acc;
+
+	# no instructions are reordered, as performance appears
+	# optimal... or rather that all attempts to reorder didn't
+	# result in better performance [which by the way is not a
+	# bit lower than ecryption].
+	if($i==3)   {	&mov	($key,$__key);			}
+	else        {	&mov	($out,$s[0]);			}
+			&and	($out,0xFF);
+			&mov	($out,&DWP(0,$td,$out,8));
+
+	if ($i==3)  {	$tmp=$s[1];				}
+			&movz	($tmp,&HB($s[1]));
+			&xor	($out,&DWP(3,$td,$tmp,8));
+
+	if ($i==3)  {	$tmp=$s[2]; &mov ($s[1],$acc);		}
+	else        {	&mov	($tmp,$s[2]);			}
+			&shr	($tmp,16);
+			&and	($tmp,0xFF);
+			&xor	($out,&DWP(2,$td,$tmp,8));
+
+	if ($i==3)  {	$tmp=$s[3]; &mov ($s[2],$__s1);		}
+	else        {	&mov	($tmp,$s[3]);			}
+			&shr	($tmp,24);
+			&xor	($out,&DWP(1,$td,$tmp,8));
+	if ($i<2)   {	&mov	(&DWP(4+4*$i,"esp"),$out);	}
+	if ($i==3)  {	&mov	($s[3],$__s0);			}
+			&comment();
+}
+
+sub declast()
+{ my ($i,$td,@s)=@_;
+  my $tmp = $key;
+  my $out = $i==3?$s[0]:$acc;
+
+	if($i==0)   {	&lea	($td,&DWP(2048+128,$td));
+			&mov	($tmp,&DWP(0-128,$td));
+			&mov	($acc,&DWP(32-128,$td));
+			&mov	($tmp,&DWP(64-128,$td));
+			&mov	($acc,&DWP(96-128,$td));
+			&mov	($tmp,&DWP(128-128,$td));
+			&mov	($acc,&DWP(160-128,$td));
+			&mov	($tmp,&DWP(192-128,$td));
+			&mov	($acc,&DWP(224-128,$td));
+			&lea	($td,&DWP(-128,$td));		}
+	if($i==3)   {	&mov	($key,$__key);			}
+	else        {	&mov	($out,$s[0]);			}
+			&and	($out,0xFF);
+			&movz	($out,&BP(0,$td,$out,1));
+
+	if ($i==3)  {	$tmp=$s[1];				}
+			&movz	($tmp,&HB($s[1]));
+			&movz	($tmp,&BP(0,$td,$tmp,1));
+			&shl	($tmp,8);
+			&xor	($out,$tmp);
+
+	if ($i==3)  {	$tmp=$s[2]; &mov ($s[1],$acc);		}
+	else        {	mov	($tmp,$s[2]);			}
+			&shr	($tmp,16);
+			&and	($tmp,0xFF);
+			&movz	($tmp,&BP(0,$td,$tmp,1));
+			&shl	($tmp,16);
+			&xor	($out,$tmp);
+
+	if ($i==3)  {	$tmp=$s[3]; &mov ($s[2],$__s1);		}
+	else        {	&mov	($tmp,$s[3]);			}
+			&shr	($tmp,24);
+			&movz	($tmp,&BP(0,$td,$tmp,1));
+			&shl	($tmp,24);
+			&xor	($out,$tmp);
+	if ($i<2)   {	&mov	(&DWP(4+4*$i,"esp"),$out);	}
+	if ($i==3)  {	&mov	($s[3],$__s0);
+			&lea	($td,&DWP(-2048,$td));		}
+}
+
+&function_begin_B("_x86_AES_decrypt");
+	# note that caller is expected to allocate stack frame for me!
+	&mov	($__key,$key);			# save key
+
+	&xor	($s0,&DWP(0,$key));		# xor with key
+	&xor	($s1,&DWP(4,$key));
+	&xor	($s2,&DWP(8,$key));
+	&xor	($s3,&DWP(12,$key));
+
+	&mov	($acc,&DWP(240,$key));		# load key->rounds
+
+	if ($small_footprint) {
+	    &lea	($acc,&DWP(-2,$acc,$acc));
+	    &lea	($acc,&DWP(0,$key,$acc,8));
+	    &mov	($__end,$acc);		# end of key schedule
+	    &set_label("loop",16);
+		&decstep(0,$tbl,$s0,$s3,$s2,$s1);
+		&decstep(1,$tbl,$s1,$s0,$s3,$s2);
+		&decstep(2,$tbl,$s2,$s1,$s0,$s3);
+		&decstep(3,$tbl,$s3,$s2,$s1,$s0);
+		&add	($key,16);		# advance rd_key
+		&xor	($s0,&DWP(0,$key));
+		&xor	($s1,&DWP(4,$key));
+		&xor	($s2,&DWP(8,$key));
+		&xor	($s3,&DWP(12,$key));
+	    &cmp	($key,$__end);
+	    &mov	($__key,$key);
+	    &jb		(&label("loop"));
+	}
+	else {
+	    &cmp	($acc,10);
+	    &jle	(&label("10rounds"));
+	    &cmp	($acc,12);
+	    &jle	(&label("12rounds"));
+
+	&set_label("14rounds",4);
+	    for ($i=1;$i<3;$i++) {
+		&decstep(0,$tbl,$s0,$s3,$s2,$s1);
+		&decstep(1,$tbl,$s1,$s0,$s3,$s2);
+		&decstep(2,$tbl,$s2,$s1,$s0,$s3);
+		&decstep(3,$tbl,$s3,$s2,$s1,$s0);
+		&xor	($s0,&DWP(16*$i+0,$key));
+		&xor	($s1,&DWP(16*$i+4,$key));
+		&xor	($s2,&DWP(16*$i+8,$key));
+		&xor	($s3,&DWP(16*$i+12,$key));
+	    }
+	    &add	($key,32);
+	    &mov	($__key,$key);		# advance rd_key
+	&set_label("12rounds",4);
+	    for ($i=1;$i<3;$i++) {
+		&decstep(0,$tbl,$s0,$s3,$s2,$s1);
+		&decstep(1,$tbl,$s1,$s0,$s3,$s2);
+		&decstep(2,$tbl,$s2,$s1,$s0,$s3);
+		&decstep(3,$tbl,$s3,$s2,$s1,$s0);
+		&xor	($s0,&DWP(16*$i+0,$key));
+		&xor	($s1,&DWP(16*$i+4,$key));
+		&xor	($s2,&DWP(16*$i+8,$key));
+		&xor	($s3,&DWP(16*$i+12,$key));
+	    }
+	    &add	($key,32);
+	    &mov	($__key,$key);		# advance rd_key
+	&set_label("10rounds",4);
+	    for ($i=1;$i<10;$i++) {
+		&decstep(0,$tbl,$s0,$s3,$s2,$s1);
+		&decstep(1,$tbl,$s1,$s0,$s3,$s2);
+		&decstep(2,$tbl,$s2,$s1,$s0,$s3);
+		&decstep(3,$tbl,$s3,$s2,$s1,$s0);
+		&xor	($s0,&DWP(16*$i+0,$key));
+		&xor	($s1,&DWP(16*$i+4,$key));
+		&xor	($s2,&DWP(16*$i+8,$key));
+		&xor	($s3,&DWP(16*$i+12,$key));
+	    }
+	}
+
+	&declast(0,$tbl,$s0,$s3,$s2,$s1);
+	&declast(1,$tbl,$s1,$s0,$s3,$s2);
+	&declast(2,$tbl,$s2,$s1,$s0,$s3);
+	&declast(3,$tbl,$s3,$s2,$s1,$s0);
+
+	&add	($key,$small_footprint?16:160);
+	&xor	($s0,&DWP(0,$key));
+	&xor	($s1,&DWP(4,$key));
+	&xor	($s2,&DWP(8,$key));
+	&xor	($s3,&DWP(12,$key));
+
+	&ret	();
+
+&set_label("AES_Td",64);	# Yes! I keep it in the code segment!
+	&_data_word(0x50a7f451, 0x5365417e, 0xc3a4171a, 0x965e273a);
+	&_data_word(0xcb6bab3b, 0xf1459d1f, 0xab58faac, 0x9303e34b);
+	&_data_word(0x55fa3020, 0xf66d76ad, 0x9176cc88, 0x254c02f5);
+	&_data_word(0xfcd7e54f, 0xd7cb2ac5, 0x80443526, 0x8fa362b5);
+	&_data_word(0x495ab1de, 0x671bba25, 0x980eea45, 0xe1c0fe5d);
+	&_data_word(0x02752fc3, 0x12f04c81, 0xa397468d, 0xc6f9d36b);
+	&_data_word(0xe75f8f03, 0x959c9215, 0xeb7a6dbf, 0xda595295);
+	&_data_word(0x2d83bed4, 0xd3217458, 0x2969e049, 0x44c8c98e);
+	&_data_word(0x6a89c275, 0x78798ef4, 0x6b3e5899, 0xdd71b927);
+	&_data_word(0xb64fe1be, 0x17ad88f0, 0x66ac20c9, 0xb43ace7d);
+	&_data_word(0x184adf63, 0x82311ae5, 0x60335197, 0x457f5362);
+	&_data_word(0xe07764b1, 0x84ae6bbb, 0x1ca081fe, 0x942b08f9);
+	&_data_word(0x58684870, 0x19fd458f, 0x876cde94, 0xb7f87b52);
+	&_data_word(0x23d373ab, 0xe2024b72, 0x578f1fe3, 0x2aab5566);
+	&_data_word(0x0728ebb2, 0x03c2b52f, 0x9a7bc586, 0xa50837d3);
+	&_data_word(0xf2872830, 0xb2a5bf23, 0xba6a0302, 0x5c8216ed);
+	&_data_word(0x2b1ccf8a, 0x92b479a7, 0xf0f207f3, 0xa1e2694e);
+	&_data_word(0xcdf4da65, 0xd5be0506, 0x1f6234d1, 0x8afea6c4);
+	&_data_word(0x9d532e34, 0xa055f3a2, 0x32e18a05, 0x75ebf6a4);
+	&_data_word(0x39ec830b, 0xaaef6040, 0x069f715e, 0x51106ebd);
+	&_data_word(0xf98a213e, 0x3d06dd96, 0xae053edd, 0x46bde64d);
+	&_data_word(0xb58d5491, 0x055dc471, 0x6fd40604, 0xff155060);
+	&_data_word(0x24fb9819, 0x97e9bdd6, 0xcc434089, 0x779ed967);
+	&_data_word(0xbd42e8b0, 0x888b8907, 0x385b19e7, 0xdbeec879);
+	&_data_word(0x470a7ca1, 0xe90f427c, 0xc91e84f8, 0x00000000);
+	&_data_word(0x83868009, 0x48ed2b32, 0xac70111e, 0x4e725a6c);
+	&_data_word(0xfbff0efd, 0x5638850f, 0x1ed5ae3d, 0x27392d36);
+	&_data_word(0x64d90f0a, 0x21a65c68, 0xd1545b9b, 0x3a2e3624);
+	&_data_word(0xb1670a0c, 0x0fe75793, 0xd296eeb4, 0x9e919b1b);
+	&_data_word(0x4fc5c080, 0xa220dc61, 0x694b775a, 0x161a121c);
+	&_data_word(0x0aba93e2, 0xe52aa0c0, 0x43e0223c, 0x1d171b12);
+	&_data_word(0x0b0d090e, 0xadc78bf2, 0xb9a8b62d, 0xc8a91e14);
+	&_data_word(0x8519f157, 0x4c0775af, 0xbbdd99ee, 0xfd607fa3);
+	&_data_word(0x9f2601f7, 0xbcf5725c, 0xc53b6644, 0x347efb5b);
+	&_data_word(0x7629438b, 0xdcc623cb, 0x68fcedb6, 0x63f1e4b8);
+	&_data_word(0xcadc31d7, 0x10856342, 0x40229713, 0x2011c684);
+	&_data_word(0x7d244a85, 0xf83dbbd2, 0x1132f9ae, 0x6da129c7);
+	&_data_word(0x4b2f9e1d, 0xf330b2dc, 0xec52860d, 0xd0e3c177);
+	&_data_word(0x6c16b32b, 0x99b970a9, 0xfa489411, 0x2264e947);
+	&_data_word(0xc48cfca8, 0x1a3ff0a0, 0xd82c7d56, 0xef903322);
+	&_data_word(0xc74e4987, 0xc1d138d9, 0xfea2ca8c, 0x360bd498);
+	&_data_word(0xcf81f5a6, 0x28de7aa5, 0x268eb7da, 0xa4bfad3f);
+	&_data_word(0xe49d3a2c, 0x0d927850, 0x9bcc5f6a, 0x62467e54);
+	&_data_word(0xc2138df6, 0xe8b8d890, 0x5ef7392e, 0xf5afc382);
+	&_data_word(0xbe805d9f, 0x7c93d069, 0xa92dd56f, 0xb31225cf);
+	&_data_word(0x3b99acc8, 0xa77d1810, 0x6e639ce8, 0x7bbb3bdb);
+	&_data_word(0x097826cd, 0xf418596e, 0x01b79aec, 0xa89a4f83);
+	&_data_word(0x656e95e6, 0x7ee6ffaa, 0x08cfbc21, 0xe6e815ef);
+	&_data_word(0xd99be7ba, 0xce366f4a, 0xd4099fea, 0xd67cb029);
+	&_data_word(0xafb2a431, 0x31233f2a, 0x3094a5c6, 0xc066a235);
+	&_data_word(0x37bc4e74, 0xa6ca82fc, 0xb0d090e0, 0x15d8a733);
+	&_data_word(0x4a9804f1, 0xf7daec41, 0x0e50cd7f, 0x2ff69117);
+	&_data_word(0x8dd64d76, 0x4db0ef43, 0x544daacc, 0xdf0496e4);
+	&_data_word(0xe3b5d19e, 0x1b886a4c, 0xb81f2cc1, 0x7f516546);
+	&_data_word(0x04ea5e9d, 0x5d358c01, 0x737487fa, 0x2e410bfb);
+	&_data_word(0x5a1d67b3, 0x52d2db92, 0x335610e9, 0x1347d66d);
+	&_data_word(0x8c61d79a, 0x7a0ca137, 0x8e14f859, 0x893c13eb);
+	&_data_word(0xee27a9ce, 0x35c961b7, 0xede51ce1, 0x3cb1477a);
+	&_data_word(0x59dfd29c, 0x3f73f255, 0x79ce1418, 0xbf37c773);
+	&_data_word(0xeacdf753, 0x5baafd5f, 0x146f3ddf, 0x86db4478);
+	&_data_word(0x81f3afca, 0x3ec468b9, 0x2c342438, 0x5f40a3c2);
+	&_data_word(0x72c31d16, 0x0c25e2bc, 0x8b493c28, 0x41950dff);
+	&_data_word(0x7101a839, 0xdeb30c08, 0x9ce4b4d8, 0x90c15664);
+	&_data_word(0x6184cb7b, 0x70b632d5, 0x745c6c48, 0x4257b8d0);
+
+#Td4:	# four copies of Td4 to choose from to avoid L1 aliasing
+	&data_byte(0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38);
+	&data_byte(0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb);
+	&data_byte(0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87);
+	&data_byte(0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb);
+	&data_byte(0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d);
+	&data_byte(0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e);
+	&data_byte(0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2);
+	&data_byte(0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25);
+	&data_byte(0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16);
+	&data_byte(0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92);
+	&data_byte(0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda);
+	&data_byte(0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84);
+	&data_byte(0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a);
+	&data_byte(0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06);
+	&data_byte(0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02);
+	&data_byte(0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b);
+	&data_byte(0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea);
+	&data_byte(0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73);
+	&data_byte(0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85);
+	&data_byte(0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e);
+	&data_byte(0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89);
+	&data_byte(0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b);
+	&data_byte(0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20);
+	&data_byte(0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4);
+	&data_byte(0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31);
+	&data_byte(0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f);
+	&data_byte(0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d);
+	&data_byte(0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef);
+	&data_byte(0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0);
+	&data_byte(0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61);
+	&data_byte(0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26);
+	&data_byte(0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d);
+
+	&data_byte(0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38);
+	&data_byte(0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb);
+	&data_byte(0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87);
+	&data_byte(0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb);
+	&data_byte(0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d);
+	&data_byte(0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e);
+	&data_byte(0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2);
+	&data_byte(0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25);
+	&data_byte(0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16);
+	&data_byte(0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92);
+	&data_byte(0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda);
+	&data_byte(0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84);
+	&data_byte(0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a);
+	&data_byte(0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06);
+	&data_byte(0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02);
+	&data_byte(0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b);
+	&data_byte(0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea);
+	&data_byte(0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73);
+	&data_byte(0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85);
+	&data_byte(0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e);
+	&data_byte(0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89);
+	&data_byte(0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b);
+	&data_byte(0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20);
+	&data_byte(0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4);
+	&data_byte(0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31);
+	&data_byte(0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f);
+	&data_byte(0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d);
+	&data_byte(0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef);
+	&data_byte(0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0);
+	&data_byte(0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61);
+	&data_byte(0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26);
+	&data_byte(0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d);
+
+	&data_byte(0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38);
+	&data_byte(0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb);
+	&data_byte(0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87);
+	&data_byte(0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb);
+	&data_byte(0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d);
+	&data_byte(0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e);
+	&data_byte(0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2);
+	&data_byte(0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25);
+	&data_byte(0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16);
+	&data_byte(0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92);
+	&data_byte(0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda);
+	&data_byte(0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84);
+	&data_byte(0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a);
+	&data_byte(0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06);
+	&data_byte(0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02);
+	&data_byte(0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b);
+	&data_byte(0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea);
+	&data_byte(0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73);
+	&data_byte(0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85);
+	&data_byte(0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e);
+	&data_byte(0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89);
+	&data_byte(0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b);
+	&data_byte(0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20);
+	&data_byte(0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4);
+	&data_byte(0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31);
+	&data_byte(0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f);
+	&data_byte(0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d);
+	&data_byte(0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef);
+	&data_byte(0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0);
+	&data_byte(0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61);
+	&data_byte(0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26);
+	&data_byte(0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d);
+
+	&data_byte(0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38);
+	&data_byte(0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb);
+	&data_byte(0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87);
+	&data_byte(0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb);
+	&data_byte(0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d);
+	&data_byte(0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e);
+	&data_byte(0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2);
+	&data_byte(0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25);
+	&data_byte(0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16);
+	&data_byte(0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92);
+	&data_byte(0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda);
+	&data_byte(0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84);
+	&data_byte(0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a);
+	&data_byte(0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06);
+	&data_byte(0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02);
+	&data_byte(0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b);
+	&data_byte(0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea);
+	&data_byte(0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73);
+	&data_byte(0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85);
+	&data_byte(0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e);
+	&data_byte(0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89);
+	&data_byte(0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b);
+	&data_byte(0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20);
+	&data_byte(0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4);
+	&data_byte(0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31);
+	&data_byte(0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f);
+	&data_byte(0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d);
+	&data_byte(0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef);
+	&data_byte(0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0);
+	&data_byte(0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61);
+	&data_byte(0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26);
+	&data_byte(0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d);
+&function_end_B("_x86_AES_decrypt");
+
+# void AES_decrypt (const void *inp,void *out,const AES_KEY *key);
+&function_begin("AES_decrypt");
+	&mov	($acc,&wparam(0));		# load inp
+	&mov	($key,&wparam(2));		# load key
+
+	&mov	($s0,"esp");
+	&sub	("esp",36);
+	&and	("esp",-64);			# align to cache-line
+
+	# place stack frame just "above" the key schedule
+	&lea	($s1,&DWP(-64-63,$key));
+	&sub	($s1,"esp");
+	&neg	($s1);
+	&and	($s1,0x3C0);	# modulo 1024, but aligned to cache-line
+	&sub	("esp",$s1);
+	&add	("esp",4);	# 4 is reserved for caller's return address
+	&mov	($_esp,$s0);	# save stack pointer
+
+	&call   (&label("pic_point"));          # make it PIC!
+	&set_label("pic_point");
+	&blindpop($tbl);
+	&picmeup($s0,"OPENSSL_ia32cap_P",$tbl,&label("pic_point")) if(!$x86only);
+	&lea    ($tbl,&DWP(&label("AES_Td")."-".&label("pic_point"),$tbl));
+
+	# pick Td4 copy which can't "overlap" with stack frame or key schedule
+	&lea	($s1,&DWP(768-4,"esp"));
+	&sub	($s1,$tbl);
+	&and	($s1,0x300);
+	&lea	($tbl,&DWP(2048+128,$tbl,$s1));
+
+					if (!$x86only) {
+	&bt	(&DWP(0,$s0),25);	# check for SSE bit
+	&jnc	(&label("x86"));
+
+	&movq	("mm0",&QWP(0,$acc));
+	&movq	("mm4",&QWP(8,$acc));
+	&call	("_sse_AES_decrypt_compact");
+	&mov	("esp",$_esp);			# restore stack pointer
+	&mov	($acc,&wparam(1));		# load out
+	&movq	(&QWP(0,$acc),"mm0");		# write output data
+	&movq	(&QWP(8,$acc),"mm4");
+	&emms	();
+	&function_end_A();
+					}
+	&set_label("x86",16);
+	&mov	($_tbl,$tbl);
+	&mov	($s0,&DWP(0,$acc));		# load input data
+	&mov	($s1,&DWP(4,$acc));
+	&mov	($s2,&DWP(8,$acc));
+	&mov	($s3,&DWP(12,$acc));
+	&call	("_x86_AES_decrypt_compact");
+	&mov	("esp",$_esp);			# restore stack pointer
+	&mov	($acc,&wparam(1));		# load out
+	&mov	(&DWP(0,$acc),$s0);		# write output data
+	&mov	(&DWP(4,$acc),$s1);
+	&mov	(&DWP(8,$acc),$s2);
+	&mov	(&DWP(12,$acc),$s3);
+&function_end("AES_decrypt");
+
+# void AES_cbc_encrypt (const void char *inp, unsigned char *out,
+#			size_t length, const AES_KEY *key,
+#			unsigned char *ivp,const int enc);
+{
+# stack frame layout
+#             -4(%esp)		# return address	 0(%esp)
+#              0(%esp)		# s0 backing store	 4(%esp)
+#              4(%esp)		# s1 backing store	 8(%esp)
+#              8(%esp)		# s2 backing store	12(%esp)
+#             12(%esp)		# s3 backing store	16(%esp)
+#             16(%esp)		# key backup		20(%esp)
+#             20(%esp)		# end of key schedule	24(%esp)
+#             24(%esp)		# %ebp backup		28(%esp)
+#             28(%esp)		# %esp backup
+my $_inp=&DWP(32,"esp");	# copy of wparam(0)
+my $_out=&DWP(36,"esp");	# copy of wparam(1)
+my $_len=&DWP(40,"esp");	# copy of wparam(2)
+my $_key=&DWP(44,"esp");	# copy of wparam(3)
+my $_ivp=&DWP(48,"esp");	# copy of wparam(4)
+my $_tmp=&DWP(52,"esp");	# volatile variable
+#
+my $ivec=&DWP(60,"esp");	# ivec[16]
+my $aes_key=&DWP(76,"esp");	# copy of aes_key
+my $mark=&DWP(76+240,"esp");	# copy of aes_key->rounds
+
+&function_begin("AES_cbc_encrypt");
+	&mov	($s2 eq "ecx"? $s2 : "",&wparam(2));	# load len
+	&cmp	($s2,0);
+	&je	(&label("drop_out"));
+
+	&call   (&label("pic_point"));		# make it PIC!
+	&set_label("pic_point");
+	&blindpop($tbl);
+	&picmeup($s0,"OPENSSL_ia32cap_P",$tbl,&label("pic_point")) if(!$x86only);
+
+	&cmp	(&wparam(5),0);
+	&lea    ($tbl,&DWP(&label("AES_Te")."-".&label("pic_point"),$tbl));
+	&jne	(&label("picked_te"));
+	&lea	($tbl,&DWP(&label("AES_Td")."-".&label("AES_Te"),$tbl));
+	&set_label("picked_te");
+
+	# one can argue if this is required
+	&pushf	();
+	&cld	();
+
+	&cmp	($s2,$speed_limit);
+	&jb	(&label("slow_way"));
+	&test	($s2,15);
+	&jnz	(&label("slow_way"));
+					if (!$x86only) {
+	&bt	(&DWP(0,$s0),28);	# check for hyper-threading bit
+	&jc	(&label("slow_way"));
+					}
+	# pre-allocate aligned stack frame...
+	&lea	($acc,&DWP(-80-244,"esp"));
+	&and	($acc,-64);
+
+	# ... and make sure it doesn't alias with $tbl modulo 4096
+	&mov	($s0,$tbl);
+	&lea	($s1,&DWP(2048+256,$tbl));
+	&mov	($s3,$acc);
+	&and	($s0,0xfff);		# s = %ebp&0xfff
+	&and	($s1,0xfff);		# e = (%ebp+2048+256)&0xfff
+	&and	($s3,0xfff);		# p = %esp&0xfff
+
+	&cmp	($s3,$s1);		# if (p>=e) %esp =- (p-e);
+	&jb	(&label("tbl_break_out"));
+	&sub	($s3,$s1);
+	&sub	($acc,$s3);
+	&jmp	(&label("tbl_ok"));
+	&set_label("tbl_break_out",4);	# else %esp -= (p-s)&0xfff + framesz;
+	&sub	($s3,$s0);
+	&and	($s3,0xfff);
+	&add	($s3,384);
+	&sub	($acc,$s3);
+	&set_label("tbl_ok",4);
+
+	&lea	($s3,&wparam(0));	# obtain pointer to parameter block
+	&exch	("esp",$acc);		# allocate stack frame
+	&add	("esp",4);		# reserve for return address!
+	&mov	($_tbl,$tbl);		# save %ebp
+	&mov	($_esp,$acc);		# save %esp
+
+	&mov	($s0,&DWP(0,$s3));	# load inp
+	&mov	($s1,&DWP(4,$s3));	# load out
+	#&mov	($s2,&DWP(8,$s3));	# load len
+	&mov	($key,&DWP(12,$s3));	# load key
+	&mov	($acc,&DWP(16,$s3));	# load ivp
+	&mov	($s3,&DWP(20,$s3));	# load enc flag
+
+	&mov	($_inp,$s0);		# save copy of inp
+	&mov	($_out,$s1);		# save copy of out
+	&mov	($_len,$s2);		# save copy of len
+	&mov	($_key,$key);		# save copy of key
+	&mov	($_ivp,$acc);		# save copy of ivp
+
+	&mov	($mark,0);		# copy of aes_key->rounds = 0;
+	# do we copy key schedule to stack?
+	&mov	($s1 eq "ebx" ? $s1 : "",$key);
+	&mov	($s2 eq "ecx" ? $s2 : "",244/4);
+	&sub	($s1,$tbl);
+	&mov	("esi",$key);
+	&and	($s1,0xfff);
+	&lea	("edi",$aes_key);
+	&cmp	($s1,2048+256);
+	&jb	(&label("do_copy"));
+	&cmp	($s1,4096-244);
+	&jb	(&label("skip_copy"));
+	&set_label("do_copy",4);
+		&mov	($_key,"edi");
+		&data_word(0xA5F3F689);	# rep movsd
+	&set_label("skip_copy");
+
+	&mov	($key,16);
+	&set_label("prefetch_tbl",4);
+		&mov	($s0,&DWP(0,$tbl));
+		&mov	($s1,&DWP(32,$tbl));
+		&mov	($s2,&DWP(64,$tbl));
+		&mov	($acc,&DWP(96,$tbl));
+		&lea	($tbl,&DWP(128,$tbl));
+		&sub	($key,1);
+	&jnz	(&label("prefetch_tbl"));
+	&sub	($tbl,2048);
+
+	&mov	($acc,$_inp);
+	&mov	($key,$_ivp);
+
+	&cmp	($s3,0);
+	&je	(&label("fast_decrypt"));
+
+#----------------------------- ENCRYPT -----------------------------#
+	&mov	($s0,&DWP(0,$key));		# load iv
+	&mov	($s1,&DWP(4,$key));
+
+	&set_label("fast_enc_loop",16);
+		&mov	($s2,&DWP(8,$key));
+		&mov	($s3,&DWP(12,$key));
+
+		&xor	($s0,&DWP(0,$acc));	# xor input data
+		&xor	($s1,&DWP(4,$acc));
+		&xor	($s2,&DWP(8,$acc));
+		&xor	($s3,&DWP(12,$acc));
+
+		&mov	($key,$_key);		# load key
+		&call	("_x86_AES_encrypt");
+
+		&mov	($acc,$_inp);		# load inp
+		&mov	($key,$_out);		# load out
+
+		&mov	(&DWP(0,$key),$s0);	# save output data
+		&mov	(&DWP(4,$key),$s1);
+		&mov	(&DWP(8,$key),$s2);
+		&mov	(&DWP(12,$key),$s3);
+
+		&lea	($acc,&DWP(16,$acc));	# advance inp
+		&mov	($s2,$_len);		# load len
+		&mov	($_inp,$acc);		# save inp
+		&lea	($s3,&DWP(16,$key));	# advance out
+		&mov	($_out,$s3);		# save out
+		&sub	($s2,16);		# decrease len
+		&mov	($_len,$s2);		# save len
+	&jnz	(&label("fast_enc_loop"));
+	&mov	($acc,$_ivp);		# load ivp
+	&mov	($s2,&DWP(8,$key));	# restore last 2 dwords
+	&mov	($s3,&DWP(12,$key));
+	&mov	(&DWP(0,$acc),$s0);	# save ivec
+	&mov	(&DWP(4,$acc),$s1);
+	&mov	(&DWP(8,$acc),$s2);
+	&mov	(&DWP(12,$acc),$s3);
+
+	&cmp	($mark,0);		# was the key schedule copied?
+	&mov	("edi",$_key);
+	&je	(&label("skip_ezero"));
+	# zero copy of key schedule
+	&mov	("ecx",240/4);
+	&xor	("eax","eax");
+	&align	(4);
+	&data_word(0xABF3F689);	# rep stosd
+	&set_label("skip_ezero")
+	&mov	("esp",$_esp);
+	&popf	();
+    &set_label("drop_out");
+	&function_end_A();
+	&pushf	();			# kludge, never executed
+
+#----------------------------- DECRYPT -----------------------------#
+&set_label("fast_decrypt",16);
+
+	&cmp	($acc,$_out);
+	&je	(&label("fast_dec_in_place"));	# in-place processing...
+
+	&mov	($_tmp,$key);
+
+	&align	(4);
+	&set_label("fast_dec_loop",16);
+		&mov	($s0,&DWP(0,$acc));	# read input
+		&mov	($s1,&DWP(4,$acc));
+		&mov	($s2,&DWP(8,$acc));
+		&mov	($s3,&DWP(12,$acc));
+
+		&mov	($key,$_key);		# load key
+		&call	("_x86_AES_decrypt");
+
+		&mov	($key,$_tmp);		# load ivp
+		&mov	($acc,$_len);		# load len
+		&xor	($s0,&DWP(0,$key));	# xor iv
+		&xor	($s1,&DWP(4,$key));
+		&xor	($s2,&DWP(8,$key));
+		&xor	($s3,&DWP(12,$key));
+
+		&mov	($key,$_out);		# load out
+		&mov	($acc,$_inp);		# load inp
+
+		&mov	(&DWP(0,$key),$s0);	# write output
+		&mov	(&DWP(4,$key),$s1);
+		&mov	(&DWP(8,$key),$s2);
+		&mov	(&DWP(12,$key),$s3);
+
+		&mov	($s2,$_len);		# load len
+		&mov	($_tmp,$acc);		# save ivp
+		&lea	($acc,&DWP(16,$acc));	# advance inp
+		&mov	($_inp,$acc);		# save inp
+		&lea	($key,&DWP(16,$key));	# advance out
+		&mov	($_out,$key);		# save out
+		&sub	($s2,16);		# decrease len
+		&mov	($_len,$s2);		# save len
+	&jnz	(&label("fast_dec_loop"));
+	&mov	($key,$_tmp);		# load temp ivp
+	&mov	($acc,$_ivp);		# load user ivp
+	&mov	($s0,&DWP(0,$key));	# load iv
+	&mov	($s1,&DWP(4,$key));
+	&mov	($s2,&DWP(8,$key));
+	&mov	($s3,&DWP(12,$key));
+	&mov	(&DWP(0,$acc),$s0);	# copy back to user
+	&mov	(&DWP(4,$acc),$s1);
+	&mov	(&DWP(8,$acc),$s2);
+	&mov	(&DWP(12,$acc),$s3);
+	&jmp	(&label("fast_dec_out"));
+
+    &set_label("fast_dec_in_place",16);
+	&set_label("fast_dec_in_place_loop");
+		&mov	($s0,&DWP(0,$acc));	# read input
+		&mov	($s1,&DWP(4,$acc));
+		&mov	($s2,&DWP(8,$acc));
+		&mov	($s3,&DWP(12,$acc));
+
+		&lea	($key,$ivec);
+		&mov	(&DWP(0,$key),$s0);	# copy to temp
+		&mov	(&DWP(4,$key),$s1);
+		&mov	(&DWP(8,$key),$s2);
+		&mov	(&DWP(12,$key),$s3);
+
+		&mov	($key,$_key);		# load key
+		&call	("_x86_AES_decrypt");
+
+		&mov	($key,$_ivp);		# load ivp
+		&mov	($acc,$_out);		# load out
+		&xor	($s0,&DWP(0,$key));	# xor iv
+		&xor	($s1,&DWP(4,$key));
+		&xor	($s2,&DWP(8,$key));
+		&xor	($s3,&DWP(12,$key));
+
+		&mov	(&DWP(0,$acc),$s0);	# write output
+		&mov	(&DWP(4,$acc),$s1);
+		&mov	(&DWP(8,$acc),$s2);
+		&mov	(&DWP(12,$acc),$s3);
+
+		&lea	($acc,&DWP(16,$acc));	# advance out
+		&mov	($_out,$acc);		# save out
+
+		&lea	($acc,$ivec);
+		&mov	($s0,&DWP(0,$acc));	# read temp
+		&mov	($s1,&DWP(4,$acc));
+		&mov	($s2,&DWP(8,$acc));
+		&mov	($s3,&DWP(12,$acc));
+
+		&mov	(&DWP(0,$key),$s0);	# copy iv
+		&mov	(&DWP(4,$key),$s1);
+		&mov	(&DWP(8,$key),$s2);
+		&mov	(&DWP(12,$key),$s3);
+
+		&mov	($acc,$_inp);		# load inp
+		&mov	($s2,$_len);		# load len
+		&lea	($acc,&DWP(16,$acc));	# advance inp
+		&mov	($_inp,$acc);		# save inp
+		&sub	($s2,16);		# decrease len
+		&mov	($_len,$s2);		# save len
+	&jnz	(&label("fast_dec_in_place_loop"));
+
+    &set_label("fast_dec_out",4);
+	&cmp	($mark,0);		# was the key schedule copied?
+	&mov	("edi",$_key);
+	&je	(&label("skip_dzero"));
+	# zero copy of key schedule
+	&mov	("ecx",240/4);
+	&xor	("eax","eax");
+	&align	(4);
+	&data_word(0xABF3F689);	# rep stosd
+	&set_label("skip_dzero")
+	&mov	("esp",$_esp);
+	&popf	();
+	&function_end_A();
+	&pushf	();			# kludge, never executed
+
+#--------------------------- SLOW ROUTINE ---------------------------#
+&set_label("slow_way",16);
+
+	&mov	($s0,&DWP(0,$s0)) if (!$x86only);# load OPENSSL_ia32cap
+	&mov	($key,&wparam(3));	# load key
+
+	# pre-allocate aligned stack frame...
+	&lea	($acc,&DWP(-80,"esp"));
+	&and	($acc,-64);
+
+	# ... and make sure it doesn't alias with $key modulo 1024
+	&lea	($s1,&DWP(-80-63,$key));
+	&sub	($s1,$acc);
+	&neg	($s1);
+	&and	($s1,0x3C0);	# modulo 1024, but aligned to cache-line
+	&sub	($acc,$s1);
+
+	# pick S-box copy which can't overlap with stack frame or $key
+	&lea	($s1,&DWP(768,$acc));
+	&sub	($s1,$tbl);
+	&and	($s1,0x300);
+	&lea	($tbl,&DWP(2048+128,$tbl,$s1));
+
+	&lea	($s3,&wparam(0));	# pointer to parameter block
+
+	&exch	("esp",$acc);
+	&add	("esp",4);		# reserve for return address!
+	&mov	($_tbl,$tbl);		# save %ebp
+	&mov	($_esp,$acc);		# save %esp
+	&mov	($_tmp,$s0);		# save OPENSSL_ia32cap
+
+	&mov	($s0,&DWP(0,$s3));	# load inp
+	&mov	($s1,&DWP(4,$s3));	# load out
+	#&mov	($s2,&DWP(8,$s3));	# load len
+	#&mov	($key,&DWP(12,$s3));	# load key
+	&mov	($acc,&DWP(16,$s3));	# load ivp
+	&mov	($s3,&DWP(20,$s3));	# load enc flag
+
+	&mov	($_inp,$s0);		# save copy of inp
+	&mov	($_out,$s1);		# save copy of out
+	&mov	($_len,$s2);		# save copy of len
+	&mov	($_key,$key);		# save copy of key
+	&mov	($_ivp,$acc);		# save copy of ivp
+
+	&mov	($key,$acc);
+	&mov	($acc,$s0);
+
+	&cmp	($s3,0);
+	&je	(&label("slow_decrypt"));
+
+#--------------------------- SLOW ENCRYPT ---------------------------#
+	&cmp	($s2,16);
+	&mov	($s3,$s1);
+	&jb	(&label("slow_enc_tail"));
+
+					if (!$x86only) {
+	&bt	($_tmp,25);		# check for SSE bit
+	&jnc	(&label("slow_enc_x86"));
+
+	&movq	("mm0",&QWP(0,$key));	# load iv
+	&movq	("mm4",&QWP(8,$key));
+
+	&set_label("slow_enc_loop_sse",16);
+		&pxor	("mm0",&QWP(0,$acc));	# xor input data
+		&pxor	("mm4",&QWP(8,$acc));
+
+		&mov	($key,$_key);
+		&call	("_sse_AES_encrypt_compact");
+
+		&mov	($acc,$_inp);		# load inp
+		&mov	($key,$_out);		# load out
+		&mov	($s2,$_len);		# load len
+
+		&movq	(&QWP(0,$key),"mm0");	# save output data
+		&movq	(&QWP(8,$key),"mm4");
+
+		&lea	($acc,&DWP(16,$acc));	# advance inp
+		&mov	($_inp,$acc);		# save inp
+		&lea	($s3,&DWP(16,$key));	# advance out
+		&mov	($_out,$s3);		# save out
+		&sub	($s2,16);		# decrease len
+		&cmp	($s2,16);
+		&mov	($_len,$s2);		# save len
+	&jae	(&label("slow_enc_loop_sse"));
+	&test	($s2,15);
+	&jnz	(&label("slow_enc_tail"));
+	&mov	($acc,$_ivp);		# load ivp
+	&movq	(&QWP(0,$acc),"mm0");	# save ivec
+	&movq	(&QWP(8,$acc),"mm4");
+	&emms	();
+	&mov	("esp",$_esp);
+	&popf	();
+	&function_end_A();
+	&pushf	();			# kludge, never executed
+					}
+    &set_label("slow_enc_x86",16);
+	&mov	($s0,&DWP(0,$key));	# load iv
+	&mov	($s1,&DWP(4,$key));
+
+	&set_label("slow_enc_loop_x86",4);
+		&mov	($s2,&DWP(8,$key));
+		&mov	($s3,&DWP(12,$key));
+
+		&xor	($s0,&DWP(0,$acc));	# xor input data
+		&xor	($s1,&DWP(4,$acc));
+		&xor	($s2,&DWP(8,$acc));
+		&xor	($s3,&DWP(12,$acc));
+
+		&mov	($key,$_key);		# load key
+		&call	("_x86_AES_encrypt_compact");
+
+		&mov	($acc,$_inp);		# load inp
+		&mov	($key,$_out);		# load out
+
+		&mov	(&DWP(0,$key),$s0);	# save output data
+		&mov	(&DWP(4,$key),$s1);
+		&mov	(&DWP(8,$key),$s2);
+		&mov	(&DWP(12,$key),$s3);
+
+		&mov	($s2,$_len);		# load len
+		&lea	($acc,&DWP(16,$acc));	# advance inp
+		&mov	($_inp,$acc);		# save inp
+		&lea	($s3,&DWP(16,$key));	# advance out
+		&mov	($_out,$s3);		# save out
+		&sub	($s2,16);		# decrease len
+		&cmp	($s2,16);
+		&mov	($_len,$s2);		# save len
+	&jae	(&label("slow_enc_loop_x86"));
+	&test	($s2,15);
+	&jnz	(&label("slow_enc_tail"));
+	&mov	($acc,$_ivp);		# load ivp
+	&mov	($s2,&DWP(8,$key));	# restore last dwords
+	&mov	($s3,&DWP(12,$key));
+	&mov	(&DWP(0,$acc),$s0);	# save ivec
+	&mov	(&DWP(4,$acc),$s1);
+	&mov	(&DWP(8,$acc),$s2);
+	&mov	(&DWP(12,$acc),$s3);
+
+	&mov	("esp",$_esp);
+	&popf	();
+	&function_end_A();
+	&pushf	();			# kludge, never executed
+
+    &set_label("slow_enc_tail",16);
+	&emms	()	if (!$x86only);
+	&mov	($key eq "edi"? $key:"",$s3);	# load out to edi
+	&mov	($s1,16);
+	&sub	($s1,$s2);
+	&cmp	($key,$acc eq "esi"? $acc:"");	# compare with inp
+	&je	(&label("enc_in_place"));
+	&align	(4);
+	&data_word(0xA4F3F689);	# rep movsb	# copy input
+	&jmp	(&label("enc_skip_in_place"));
+    &set_label("enc_in_place");
+	&lea	($key,&DWP(0,$key,$s2));
+    &set_label("enc_skip_in_place");
+	&mov	($s2,$s1);
+	&xor	($s0,$s0);
+	&align	(4);
+	&data_word(0xAAF3F689);	# rep stosb	# zero tail
+
+	&mov	($key,$_ivp);			# restore ivp
+	&mov	($acc,$s3);			# output as input
+	&mov	($s0,&DWP(0,$key));
+	&mov	($s1,&DWP(4,$key));
+	&mov	($_len,16);			# len=16
+	&jmp	(&label("slow_enc_loop_x86"));	# one more spin...
+
+#--------------------------- SLOW DECRYPT ---------------------------#
+&set_label("slow_decrypt",16);
+					if (!$x86only) {
+	&bt	($_tmp,25);		# check for SSE bit
+	&jnc	(&label("slow_dec_loop_x86"));
+
+	&set_label("slow_dec_loop_sse",4);
+		&movq	("mm0",&QWP(0,$acc));	# read input
+		&movq	("mm4",&QWP(8,$acc));
+
+		&mov	($key,$_key);
+		&call	("_sse_AES_decrypt_compact");
+
+		&mov	($acc,$_inp);		# load inp
+		&lea	($s0,$ivec);
+		&mov	($s1,$_out);		# load out
+		&mov	($s2,$_len);		# load len
+		&mov	($key,$_ivp);		# load ivp
+
+		&movq	("mm1",&QWP(0,$acc));	# re-read input
+		&movq	("mm5",&QWP(8,$acc));
+
+		&pxor	("mm0",&QWP(0,$key));	# xor iv
+		&pxor	("mm4",&QWP(8,$key));
+
+		&movq	(&QWP(0,$key),"mm1");	# copy input to iv
+		&movq	(&QWP(8,$key),"mm5");
+
+		&sub	($s2,16);		# decrease len
+		&jc	(&label("slow_dec_partial_sse"));
+
+		&movq	(&QWP(0,$s1),"mm0");	# write output
+		&movq	(&QWP(8,$s1),"mm4");
+
+		&lea	($s1,&DWP(16,$s1));	# advance out
+		&mov	($_out,$s1);		# save out
+		&lea	($acc,&DWP(16,$acc));	# advance inp
+		&mov	($_inp,$acc);		# save inp
+		&mov	($_len,$s2);		# save len
+	&jnz	(&label("slow_dec_loop_sse"));
+	&emms	();
+	&mov	("esp",$_esp);
+	&popf	();
+	&function_end_A();
+	&pushf	();			# kludge, never executed
+
+    &set_label("slow_dec_partial_sse",16);
+	&movq	(&QWP(0,$s0),"mm0");	# save output to temp
+	&movq	(&QWP(8,$s0),"mm4");
+	&emms	();
+
+	&add	($s2 eq "ecx" ? "ecx":"",16);
+	&mov	("edi",$s1);		# out
+	&mov	("esi",$s0);		# temp
+	&align	(4);
+	&data_word(0xA4F3F689);		# rep movsb # copy partial output
+
+	&mov	("esp",$_esp);
+	&popf	();
+	&function_end_A();
+	&pushf	();			# kludge, never executed
+					}
+	&set_label("slow_dec_loop_x86",16);
+		&mov	($s0,&DWP(0,$acc));	# read input
+		&mov	($s1,&DWP(4,$acc));
+		&mov	($s2,&DWP(8,$acc));
+		&mov	($s3,&DWP(12,$acc));
+
+		&lea	($key,$ivec);
+		&mov	(&DWP(0,$key),$s0);	# copy to temp
+		&mov	(&DWP(4,$key),$s1);
+		&mov	(&DWP(8,$key),$s2);
+		&mov	(&DWP(12,$key),$s3);
+
+		&mov	($key,$_key);		# load key
+		&call	("_x86_AES_decrypt_compact");
+
+		&mov	($key,$_ivp);		# load ivp
+		&mov	($acc,$_len);		# load len
+		&xor	($s0,&DWP(0,$key));	# xor iv
+		&xor	($s1,&DWP(4,$key));
+		&xor	($s2,&DWP(8,$key));
+		&xor	($s3,&DWP(12,$key));
+
+		&sub	($acc,16);
+		&jc	(&label("slow_dec_partial_x86"));
+
+		&mov	($_len,$acc);		# save len
+		&mov	($acc,$_out);		# load out
+
+		&mov	(&DWP(0,$acc),$s0);	# write output
+		&mov	(&DWP(4,$acc),$s1);
+		&mov	(&DWP(8,$acc),$s2);
+		&mov	(&DWP(12,$acc),$s3);
+
+		&lea	($acc,&DWP(16,$acc));	# advance out
+		&mov	($_out,$acc);		# save out
+
+		&lea	($acc,$ivec);
+		&mov	($s0,&DWP(0,$acc));	# read temp
+		&mov	($s1,&DWP(4,$acc));
+		&mov	($s2,&DWP(8,$acc));
+		&mov	($s3,&DWP(12,$acc));
+
+		&mov	(&DWP(0,$key),$s0);	# copy it to iv
+		&mov	(&DWP(4,$key),$s1);
+		&mov	(&DWP(8,$key),$s2);
+		&mov	(&DWP(12,$key),$s3);
+
+		&mov	($acc,$_inp);		# load inp
+		&lea	($acc,&DWP(16,$acc));	# advance inp
+		&mov	($_inp,$acc);		# save inp
+	&jnz	(&label("slow_dec_loop_x86"));
+	&mov	("esp",$_esp);
+	&popf	();
+	&function_end_A();
+	&pushf	();			# kludge, never executed
+
+    &set_label("slow_dec_partial_x86",16);
+	&lea	($acc,$ivec);
+	&mov	(&DWP(0,$acc),$s0);	# save output to temp
+	&mov	(&DWP(4,$acc),$s1);
+	&mov	(&DWP(8,$acc),$s2);
+	&mov	(&DWP(12,$acc),$s3);
+
+	&mov	($acc,$_inp);
+	&mov	($s0,&DWP(0,$acc));	# re-read input
+	&mov	($s1,&DWP(4,$acc));
+	&mov	($s2,&DWP(8,$acc));
+	&mov	($s3,&DWP(12,$acc));
+
+	&mov	(&DWP(0,$key),$s0);	# copy it to iv
+	&mov	(&DWP(4,$key),$s1);
+	&mov	(&DWP(8,$key),$s2);
+	&mov	(&DWP(12,$key),$s3);
+
+	&mov	("ecx",$_len);
+	&mov	("edi",$_out);
+	&lea	("esi",$ivec);
+	&align	(4);
+	&data_word(0xA4F3F689);		# rep movsb # copy partial output
+
+	&mov	("esp",$_esp);
+	&popf	();
+&function_end("AES_cbc_encrypt");
+}
+
+#------------------------------------------------------------------#
+
+sub enckey()
+{
+	&movz	("esi",&LB("edx"));		# rk[i]>>0
+	&movz	("ebx",&BP(-128,$tbl,"esi",1));
+	&movz	("esi",&HB("edx"));		# rk[i]>>8
+	&shl	("ebx",24);
+	&xor	("eax","ebx");
+
+	&movz	("ebx",&BP(-128,$tbl,"esi",1));
+	&shr	("edx",16);
+	&movz	("esi",&LB("edx"));		# rk[i]>>16
+	&xor	("eax","ebx");
+
+	&movz	("ebx",&BP(-128,$tbl,"esi",1));
+	&movz	("esi",&HB("edx"));		# rk[i]>>24
+	&shl	("ebx",8);
+	&xor	("eax","ebx");
+
+	&movz	("ebx",&BP(-128,$tbl,"esi",1));
+	&shl	("ebx",16);
+	&xor	("eax","ebx");
+
+	&xor	("eax",&DWP(1024-128,$tbl,"ecx",4));	# rcon
+}
+
+&function_begin("_x86_AES_set_encrypt_key");
+	&mov	("esi",&wparam(1));		# user supplied key
+	&mov	("edi",&wparam(3));		# private key schedule
+
+	&test	("esi",-1);
+	&jz	(&label("badpointer"));
+	&test	("edi",-1);
+	&jz	(&label("badpointer"));
+
+	&call	(&label("pic_point"));
+	&set_label("pic_point");
+	&blindpop($tbl);
+	&lea	($tbl,&DWP(&label("AES_Te")."-".&label("pic_point"),$tbl));
+	&lea	($tbl,&DWP(2048+128,$tbl));
+
+	# prefetch Te4
+	&mov	("eax",&DWP(0-128,$tbl));
+	&mov	("ebx",&DWP(32-128,$tbl));
+	&mov	("ecx",&DWP(64-128,$tbl));
+	&mov	("edx",&DWP(96-128,$tbl));
+	&mov	("eax",&DWP(128-128,$tbl));
+	&mov	("ebx",&DWP(160-128,$tbl));
+	&mov	("ecx",&DWP(192-128,$tbl));
+	&mov	("edx",&DWP(224-128,$tbl));
+
+	&mov	("ecx",&wparam(2));		# number of bits in key
+	&cmp	("ecx",128);
+	&je	(&label("10rounds"));
+	&cmp	("ecx",192);
+	&je	(&label("12rounds"));
+	&cmp	("ecx",256);
+	&je	(&label("14rounds"));
+	&mov	("eax",-2);			# invalid number of bits
+	&jmp	(&label("exit"));
+
+    &set_label("10rounds");
+	&mov	("eax",&DWP(0,"esi"));		# copy first 4 dwords
+	&mov	("ebx",&DWP(4,"esi"));
+	&mov	("ecx",&DWP(8,"esi"));
+	&mov	("edx",&DWP(12,"esi"));
+	&mov	(&DWP(0,"edi"),"eax");
+	&mov	(&DWP(4,"edi"),"ebx");
+	&mov	(&DWP(8,"edi"),"ecx");
+	&mov	(&DWP(12,"edi"),"edx");
+
+	&xor	("ecx","ecx");
+	&jmp	(&label("10shortcut"));
+
+	&align	(4);
+	&set_label("10loop");
+		&mov	("eax",&DWP(0,"edi"));		# rk[0]
+		&mov	("edx",&DWP(12,"edi"));		# rk[3]
+	&set_label("10shortcut");
+		&enckey	();
+
+		&mov	(&DWP(16,"edi"),"eax");		# rk[4]
+		&xor	("eax",&DWP(4,"edi"));
+		&mov	(&DWP(20,"edi"),"eax");		# rk[5]
+		&xor	("eax",&DWP(8,"edi"));
+		&mov	(&DWP(24,"edi"),"eax");		# rk[6]
+		&xor	("eax",&DWP(12,"edi"));
+		&mov	(&DWP(28,"edi"),"eax");		# rk[7]
+		&inc	("ecx");
+		&add	("edi",16);
+		&cmp	("ecx",10);
+	&jl	(&label("10loop"));
+
+	&mov	(&DWP(80,"edi"),10);		# setup number of rounds
+	&xor	("eax","eax");
+	&jmp	(&label("exit"));
+
+    &set_label("12rounds");
+	&mov	("eax",&DWP(0,"esi"));		# copy first 6 dwords
+	&mov	("ebx",&DWP(4,"esi"));
+	&mov	("ecx",&DWP(8,"esi"));
+	&mov	("edx",&DWP(12,"esi"));
+	&mov	(&DWP(0,"edi"),"eax");
+	&mov	(&DWP(4,"edi"),"ebx");
+	&mov	(&DWP(8,"edi"),"ecx");
+	&mov	(&DWP(12,"edi"),"edx");
+	&mov	("ecx",&DWP(16,"esi"));
+	&mov	("edx",&DWP(20,"esi"));
+	&mov	(&DWP(16,"edi"),"ecx");
+	&mov	(&DWP(20,"edi"),"edx");
+
+	&xor	("ecx","ecx");
+	&jmp	(&label("12shortcut"));
+
+	&align	(4);
+	&set_label("12loop");
+		&mov	("eax",&DWP(0,"edi"));		# rk[0]
+		&mov	("edx",&DWP(20,"edi"));		# rk[5]
+	&set_label("12shortcut");
+		&enckey	();
+
+		&mov	(&DWP(24,"edi"),"eax");		# rk[6]
+		&xor	("eax",&DWP(4,"edi"));
+		&mov	(&DWP(28,"edi"),"eax");		# rk[7]
+		&xor	("eax",&DWP(8,"edi"));
+		&mov	(&DWP(32,"edi"),"eax");		# rk[8]
+		&xor	("eax",&DWP(12,"edi"));
+		&mov	(&DWP(36,"edi"),"eax");		# rk[9]
+
+		&cmp	("ecx",7);
+		&je	(&label("12break"));
+		&inc	("ecx");
+
+		&xor	("eax",&DWP(16,"edi"));
+		&mov	(&DWP(40,"edi"),"eax");		# rk[10]
+		&xor	("eax",&DWP(20,"edi"));
+		&mov	(&DWP(44,"edi"),"eax");		# rk[11]
+
+		&add	("edi",24);
+	&jmp	(&label("12loop"));
+
+	&set_label("12break");
+	&mov	(&DWP(72,"edi"),12);		# setup number of rounds
+	&xor	("eax","eax");
+	&jmp	(&label("exit"));
+
+    &set_label("14rounds");
+	&mov	("eax",&DWP(0,"esi"));		# copy first 8 dwords
+	&mov	("ebx",&DWP(4,"esi"));
+	&mov	("ecx",&DWP(8,"esi"));
+	&mov	("edx",&DWP(12,"esi"));
+	&mov	(&DWP(0,"edi"),"eax");
+	&mov	(&DWP(4,"edi"),"ebx");
+	&mov	(&DWP(8,"edi"),"ecx");
+	&mov	(&DWP(12,"edi"),"edx");
+	&mov	("eax",&DWP(16,"esi"));
+	&mov	("ebx",&DWP(20,"esi"));
+	&mov	("ecx",&DWP(24,"esi"));
+	&mov	("edx",&DWP(28,"esi"));
+	&mov	(&DWP(16,"edi"),"eax");
+	&mov	(&DWP(20,"edi"),"ebx");
+	&mov	(&DWP(24,"edi"),"ecx");
+	&mov	(&DWP(28,"edi"),"edx");
+
+	&xor	("ecx","ecx");
+	&jmp	(&label("14shortcut"));
+
+	&align	(4);
+	&set_label("14loop");
+		&mov	("edx",&DWP(28,"edi"));		# rk[7]
+	&set_label("14shortcut");
+		&mov	("eax",&DWP(0,"edi"));		# rk[0]
+
+		&enckey	();
+
+		&mov	(&DWP(32,"edi"),"eax");		# rk[8]
+		&xor	("eax",&DWP(4,"edi"));
+		&mov	(&DWP(36,"edi"),"eax");		# rk[9]
+		&xor	("eax",&DWP(8,"edi"));
+		&mov	(&DWP(40,"edi"),"eax");		# rk[10]
+		&xor	("eax",&DWP(12,"edi"));
+		&mov	(&DWP(44,"edi"),"eax");		# rk[11]
+
+		&cmp	("ecx",6);
+		&je	(&label("14break"));
+		&inc	("ecx");
+
+		&mov	("edx","eax");
+		&mov	("eax",&DWP(16,"edi"));		# rk[4]
+		&movz	("esi",&LB("edx"));		# rk[11]>>0
+		&movz	("ebx",&BP(-128,$tbl,"esi",1));
+		&movz	("esi",&HB("edx"));		# rk[11]>>8
+		&xor	("eax","ebx");
+
+		&movz	("ebx",&BP(-128,$tbl,"esi",1));
+		&shr	("edx",16);
+		&shl	("ebx",8);
+		&movz	("esi",&LB("edx"));		# rk[11]>>16
+		&xor	("eax","ebx");
+
+		&movz	("ebx",&BP(-128,$tbl,"esi",1));
+		&movz	("esi",&HB("edx"));		# rk[11]>>24
+		&shl	("ebx",16);
+		&xor	("eax","ebx");
+
+		&movz	("ebx",&BP(-128,$tbl,"esi",1));
+		&shl	("ebx",24);
+		&xor	("eax","ebx");
+
+		&mov	(&DWP(48,"edi"),"eax");		# rk[12]
+		&xor	("eax",&DWP(20,"edi"));
+		&mov	(&DWP(52,"edi"),"eax");		# rk[13]
+		&xor	("eax",&DWP(24,"edi"));
+		&mov	(&DWP(56,"edi"),"eax");		# rk[14]
+		&xor	("eax",&DWP(28,"edi"));
+		&mov	(&DWP(60,"edi"),"eax");		# rk[15]
+
+		&add	("edi",32);
+	&jmp	(&label("14loop"));
+
+	&set_label("14break");
+	&mov	(&DWP(48,"edi"),14);		# setup number of rounds
+	&xor	("eax","eax");
+	&jmp	(&label("exit"));
+
+    &set_label("badpointer");
+	&mov	("eax",-1);
+    &set_label("exit");
+&function_end("_x86_AES_set_encrypt_key");
+
+# int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+#                        AES_KEY *key)
+&function_begin_B("private_AES_set_encrypt_key");
+	&call	("_x86_AES_set_encrypt_key");
+	&ret	();
+&function_end_B("private_AES_set_encrypt_key");
+
+sub deckey()
+{ my ($i,$key,$tp1,$tp2,$tp4,$tp8) = @_;
+  my $tmp = $tbl;
+
+	&mov	($acc,$tp1);
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
+	&shr	($tmp,7);
+	&lea	($tp2,&DWP(0,$tp1,$tp1));
+	&sub	($acc,$tmp);
+	&and	($tp2,0xfefefefe);
+	&and	($acc,0x1b1b1b1b);
+	&xor	($acc,$tp2);
+	&mov	($tp2,$acc);
+
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
+	&shr	($tmp,7);
+	&lea	($tp4,&DWP(0,$tp2,$tp2));
+	&sub	($acc,$tmp);
+	&and	($tp4,0xfefefefe);
+	&and	($acc,0x1b1b1b1b);
+	 &xor	($tp2,$tp1);	# tp2^tp1
+	&xor	($acc,$tp4);
+	&mov	($tp4,$acc);
+
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
+	&shr	($tmp,7);
+	&lea	($tp8,&DWP(0,$tp4,$tp4));
+	 &xor	($tp4,$tp1);	# tp4^tp1
+	&sub	($acc,$tmp);
+	&and	($tp8,0xfefefefe);
+	&and	($acc,0x1b1b1b1b);
+	 &rotl	($tp1,8);	# = ROTATE(tp1,8)
+	&xor	($tp8,$acc);
+
+	&mov	($tmp,&DWP(4*($i+1),$key));	# modulo-scheduled load
+
+	&xor	($tp1,$tp2);
+	&xor	($tp2,$tp8);
+	&xor	($tp1,$tp4);
+	&rotl	($tp2,24);
+	&xor	($tp4,$tp8);
+	&xor	($tp1,$tp8);	# ^= tp8^(tp4^tp1)^(tp2^tp1)
+	&rotl	($tp4,16);
+	&xor	($tp1,$tp2);	# ^= ROTATE(tp8^tp2^tp1,24)
+	&rotl	($tp8,8);
+	&xor	($tp1,$tp4);	# ^= ROTATE(tp8^tp4^tp1,16)
+	&mov	($tp2,$tmp);
+	&xor	($tp1,$tp8);	# ^= ROTATE(tp8,8)
+
+	&mov	(&DWP(4*$i,$key),$tp1);
+}
+
+# int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+#                        AES_KEY *key)
+&function_begin_B("private_AES_set_decrypt_key");
+	&call	("_x86_AES_set_encrypt_key");
+	&cmp	("eax",0);
+	&je	(&label("proceed"));
+	&ret	();
+
+    &set_label("proceed");
+	&push	("ebp");
+	&push	("ebx");
+	&push	("esi");
+	&push	("edi");
+
+	&mov	("esi",&wparam(2));
+	&mov	("ecx",&DWP(240,"esi"));	# pull number of rounds
+	&lea	("ecx",&DWP(0,"","ecx",4));
+	&lea	("edi",&DWP(0,"esi","ecx",4));	# pointer to last chunk
+
+	&set_label("invert",4);			# invert order of chunks
+		&mov	("eax",&DWP(0,"esi"));
+		&mov	("ebx",&DWP(4,"esi"));
+		&mov	("ecx",&DWP(0,"edi"));
+		&mov	("edx",&DWP(4,"edi"));
+		&mov	(&DWP(0,"edi"),"eax");
+		&mov	(&DWP(4,"edi"),"ebx");
+		&mov	(&DWP(0,"esi"),"ecx");
+		&mov	(&DWP(4,"esi"),"edx");
+		&mov	("eax",&DWP(8,"esi"));
+		&mov	("ebx",&DWP(12,"esi"));
+		&mov	("ecx",&DWP(8,"edi"));
+		&mov	("edx",&DWP(12,"edi"));
+		&mov	(&DWP(8,"edi"),"eax");
+		&mov	(&DWP(12,"edi"),"ebx");
+		&mov	(&DWP(8,"esi"),"ecx");
+		&mov	(&DWP(12,"esi"),"edx");
+		&add	("esi",16);
+		&sub	("edi",16);
+		&cmp	("esi","edi");
+	&jne	(&label("invert"));
+
+	&mov	($key,&wparam(2));
+	&mov	($acc,&DWP(240,$key));		# pull number of rounds
+	&lea	($acc,&DWP(-2,$acc,$acc));
+	&lea	($acc,&DWP(0,$key,$acc,8));
+	&mov	(&wparam(2),$acc);
+
+	&mov	($s0,&DWP(16,$key));		# modulo-scheduled load
+	&set_label("permute",4);		# permute the key schedule
+		&add	($key,16);
+		&deckey	(0,$key,$s0,$s1,$s2,$s3);
+		&deckey	(1,$key,$s1,$s2,$s3,$s0);
+		&deckey	(2,$key,$s2,$s3,$s0,$s1);
+		&deckey	(3,$key,$s3,$s0,$s1,$s2);
+		&cmp	($key,&wparam(2));
+	&jb	(&label("permute"));
+
+	&xor	("eax","eax");			# return success
+&function_end("private_AES_set_decrypt_key");
+&asciz("AES for x86, CRYPTOGAMS by <appro\@openssl.org>");
+
+&asm_finish();
